Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 3.0.31-perf (jenkins@surfer.cas-online.nl) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #3 PREEMPT Mon Apr 8 13:30:10 EDT 2013
- <4>[ 0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387d
- <4>[ 0.000000] CPU: VIPT aliasing data cache, unknown instruction cache
- <4>[ 0.000000] Machine: GT-S5660 Board
- <6>[ 0.000000] Partition (from atag) mibib -- Offset:0 Size:6
- <6>[ 0.000000] Partition (from atag) qcsbl -- Offset:6 Size:2
- <6>[ 0.000000] Partition (from atag) oemsbl -- Offset:8 Size:3
- <6>[ 0.000000] Partition (from atag) amss -- Offset:b Size:64
- <6>[ 0.000000] Partition (from atag) efs2 -- Offset:6f Size:24
- <6>[ 0.000000] Partition (from atag) nv_backup -- Offset:93 Size:14
- <6>[ 0.000000] Partition (from atag) arm11boot -- Offset:a7 Size:8
- <6>[ 0.000000] Partition (from atag) boot -- Offset:af Size:20
- <6>[ 0.000000] Partition (from atag) recovery -- Offset:cf Size:20
- <6>[ 0.000000] Partition (from atag) parameter -- Offset:ef Size:3
- <6>[ 0.000000] Partition (from atag) fota -- Offset:f2 Size:18
- <6>[ 0.000000] Partition (from atag) system -- Offset:10a Size:365
- <6>[ 0.000000] Partition (from atag) userdata -- Offset:46f Size:2f1
- <6>[ 0.000000] Partition (from atag) cache -- Offset:760 Size:74
- <4>[ 0.000000] Cooper H/W revision : 0x010
- <6>[ 0.000000] memory pool 3 (start 25a00000 size 2600000) initialized
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
- <3>[ 0.000000] smem_find(137, 72): wrong size 56
- <3>[ 0.000000] smem_find(137, 64): wrong size 56
- <3>[ 0.000000] smem_find(137, 64): wrong size 56
- <6>[ 0.000000] socinfo_init: v2, id=67, ver=3.0, raw_id=961, raw_ver=5
- <1>[ 0.000000] Initialized strongly ordered page successfully
- <6>[ 0.000000] L210 cache controller enabled
- <6>[ 0.000000] L210 cache controller enabled
- <6>[ 0.000000] l2x0: 4 ways, CACHE_ID 0x4100544f, AUX_CTRL 0x0006801b, Cache size: 262144 B
- <7>[ 0.000000] On node 0 totalpages: 74752
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c0719cb8, node_mem_map c0907000
- <7>[ 0.000000] Normal zone: 660 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 74092 pages, LIFO batch:15
- <6>[ 0.000000] allocating 2326528 bytes at c0b9d000 (1419d000 physical) for fb
- <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- <7>[ 0.000000] pcpu-alloc: [0] 0
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 74092
- <5>[ 0.000000] Kernel command line: mem=330M console=NULL hw=10 fbaddr=0xf6000
- <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.000000] Memory: 292MB = 292MB total
- <5>[ 0.000000] Memory: 281344k/281344k available, 56576k reserved, 0K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- <5>[ 0.000000] vmalloc : 0xd5000000 - 0xfa000000 ( 592 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xd4a00000 ( 330 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- <5>[ 0.000000] .init : 0xc0008000 - 0xc0032000 ( 168 kB)
- <5>[ 0.000000] .text : 0xc0032000 - 0xc06cc1d0 (6761 kB)
- <5>[ 0.000000] .data : 0xc06ce000 - 0xc072c5f8 ( 378 kB)
- <5>[ 0.000000] .bss : 0xc072c61c - 0xc0902278 (1880 kB)
- <6>[ 0.000000] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000] NR_IRQS:261
- <6>[ 0.000000] sched_clock: 27 bits at 600kHz, resolution 1666ns, wraps every 223696ms
- <6>[ 0.000000] Console: colour dummy device 80x30
- <6>[ 0.000448] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
- <6>[ 0.080189] pid_max: default: 32768 minimum: 301
- <6>[ 0.080624] Mount-cache hash table entries: 512
- <6>[ 0.081363] Initializing cgroup subsys cpuacct
- <6>[ 0.081426] Initializing cgroup subsys freezer
- <6>[ 0.081501] CPU: Testing write buffer coherency: ok
- <6>[ 0.081993] hw perfevents: enabled with v6 PMU driver, 3 counters available
- <6>[ 0.085108] print_constraints: dummy:
- <3>[ 0.085184] rdev_init_debugfs: Error-Bad Function Input
- <6>[ 0.085489] NET: Registered protocol family 16
- <6>[ 0.087844] print_constraints: smps0: 750 <--> 3050 mV normal
- <6>[ 0.088168] print_constraints: smps1: 750 <--> 3050 mV normal
- <6>[ 0.088409] print_constraints: smps2: 750 <--> 3050 mV normal
- <6>[ 0.088694] print_constraints: smps3: 750 <--> 3050 mV normal
- <6>[ 0.088971] print_constraints: ldo00: 2850 mV normal
- <6>[ 0.089243] print_constraints: ldo01: 2600 mV normal
- <6>[ 0.089494] print_constraints: ldo02: 2600 mV normal
- <6>[ 0.089784] print_constraints: ldo03: 2850 mV normal
- <6>[ 0.090078] print_constraints: ldo04: 2850 mV normal
- <6>[ 0.090446] print_constraints: ldo05: 2850 mV normal
- <6>[ 0.090733] print_constraints: ldo06: 3300 mV normal
- <6>[ 0.090999] print_constraints: ldo07: 2700 mV normal
- <6>[ 0.091299] print_constraints: ldo08: 2700 mV normal
- <6>[ 0.091561] print_constraints: ldo09: 2900 mV normal
- <6>[ 0.091868] print_constraints: ldo10: 2600 mV normal
- <6>[ 0.092133] print_constraints: ldo11: 1800 mV normal
- <6>[ 0.092454] print_constraints: ldo12: 1800 mV normal
- <6>[ 0.092739] print_constraints: ldo13: 1800 <--> 2850 mV normal
- <6>[ 0.093046] print_constraints: ldo14: 2700 mV normal
- <6>[ 0.093319] print_constraints: ldo15: 2600 mV normal
- <6>[ 0.093639] print_constraints: ldo16: 2850 <--> 3000 mV normal
- <6>[ 0.093961] print_constraints: ldo17: 1300 mV normal
- <6>[ 0.094239] print_constraints: maxldo03: 3000 mV normal
- <6>[ 0.094554] print_constraints: maxldo04: 2800 <--> 3000 mV normal
- <6>[ 0.094858] print_constraints: maxldo05: 1800 <--> 3000 mV normal
- <6>[ 0.095194] print_constraints: maxldo06: 2600 <--> 3000 mV normal
- <6>[ 0.095478] print_constraints: maxldo08: 2600 <--> 2800 mV normal
- <6>[ 0.095796] print_constraints: maxldo09: 2800 mV normal
- <6>[ 0.096081] print_constraints: maxldo10: 1200 <--> 2800 mV normal
- <6>[ 0.096414] print_constraints: maxldo12: 2600 mV normal
- <6>[ 0.096716] print_constraints: maxldo13: 3300 mV normal
- <6>[ 0.097053] print_constraints: maxldo14: 2600 mV normal
- <6>[ 0.097343] print_constraints: maxldo15: 1800 <--> 2850 mV normal
- <6>[ 0.097731] print_constraints: maxldo16: 2850 <--> 3000 mV normal
- <6>[ 0.098078] print_constraints: maxldo17: 3000 mV normal
- <6>[ 0.098376] print_constraints: maxldo18: 3300 mV normal
- <6>[ 0.098708] print_constraints: maxldo19: 2600 <--> 3300 mV normal
- <6>[ 0.098896] acpuclk_7627_init()
- <6>[ 0.098934] Shared PLL control available.
- <6>[ 0.099108] L val: PLL0: 50, PLL1: 12, PLL2: 41
- <6>[ 0.099281] ACPU running at 400000 KHz
- <6>[ 0.099306] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 D4 U0 U1 U2 U4
- <6>[ 0.099354] 0 19200 -1 1 19200 1 30720 -1 -1 -1 -1 5 4 6 -1
- <6>[ 0.099403] 1 120000 0 8 60000 2 61440 -1 -1 -1 -1 7 4 6 -1
- <6>[ 0.099449] 2 122880 1 2 61440 2 61440 1 -1 -1 -1 7 4 6 -1
- <6>[ 0.099496] 3 200000 2 4 66667 3 61440 1 2 -1 -1 7 4 6 -1
- <6>[ 0.099543] 4 245760 1 1 122880 2 61440 1 2 3 -1 7 -1 6 -1
- <6>[ 0.099589] 5 320000 0 3 160000 2 160000 1 2 3 -1 7 -1 6 -1
- <6>[ 0.099636] 6 400000 2 2 133333 3 160000 1 2 3 -1 7 -1 8 -1
- <6>[ 0.099683] 7 480000 0 2 160000 3 160000 1 2 3 -1 -1 -1 8 -1
- <6>[ 0.099729] 8 800000 2 1 200000 4 200000 7 -1 6 -1 -1 -1 -1 -1
- <6>[ 0.099756] 5 scaling frequencies supported.
- <6>[ 0.104378] msm7x2x_init : msm7x2x_init #####
- <3>[ 0.105534] Error configuraing GPIO_WLAN_HOST_WAKE
- <6>[ 0.109524] print_constraints: fs_gfx3d: normal
- <6>[ 0.132109] bio: create slab <bio-0> at 0
- <5>[ 0.133631] SCSI subsystem initialized
- <6>[ 0.133966] usbcore: registered new interface driver usbfs
- <6>[ 0.134178] usbcore: registered new interface driver hub
- <6>[ 0.134419] usbcore: registered new device driver usb
- <6>[ 0.134994] i2c-gpio i2c-gpio.2: using pins 23 (SDA) and 30 (SCL)
- <6>[ 0.135448] i2c-gpio i2c-gpio.3: using pins 91 (SDA) and 90 (SCL)
- <6>[ 0.135709] i2c-gpio i2c-gpio.5: using pins 37 (SDA) and 36 (SCL)
- <6>[ 0.135883] msm_i2c_probe
- <6>[ 0.136061] msm_i2c_probe: clk_ctl 316, 384000 Hz
- <6>[ 0.137259] Advanced Linux Sound Architecture Driver Version 1.0.24.
- <6>[ 0.138404] Bluetooth: Core ver 2.16
- <6>[ 0.138536] NET: Registered protocol family 31
- <6>[ 0.138558] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.138584] Bluetooth: HCI socket layer initialized
- <6>[ 0.138606] Bluetooth: L2CAP socket layer initialized
- <6>[ 0.138966] Bluetooth: SCO socket layer initialized
- <6>[ 0.139338] Switching to clocksource dg_timer
- <6>[ 0.154541] NET: Registered protocol family 2
- <6>[ 0.154893] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.155684] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- <6>[ 0.156424] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- <6>[ 0.156909] TCP: Hash tables configured (established 16384 bind 16384)
- <6>[ 0.156936] TCP reno registered
- <6>[ 0.156963] UDP hash table entries: 256 (order: 0, 4096 bytes)
- <6>[ 0.157014] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- <6>[ 0.157674] NET: Registered protocol family 1
- <6>[ 0.158469] RPC: Registered named UNIX socket transport module.
- <6>[ 0.158496] RPC: Registered udp transport module.
- <6>[ 0.158518] RPC: Registered tcp transport module.
- <6>[ 0.158538] RPC: Registered tcp NFSv4.1 backchannel transport module.
- <6>[ 0.158993] Trying to unpack rootfs image as initramfs...
- <6>[ 0.734039] Freeing initrd memory: 3060K
- <3>[ 0.738448] Notify: smsm init
- <6>[ 0.748993] rpcrouter_smd_remote_notify: smd opened 0x (null)
- <6>[ 0.769566] RPC_TIME_TOD_SET_APPS_BASES:
- <6>[ 0.769581] tick = 103384
- <6>[ 0.769589] stamp = 2001364303
- <3>[ 0.769629] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- <6>[ 0.770259] RPC_TIME_TOD_SET_APPS_BASES:
- <6>[ 0.770273] tick = 223568
- <6>[ 0.770281] stamp = 55022886158598144
- <3>[ 0.770319] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- <6>[ 0.775629] [adsp.c:adsp_init] rs3000000a -- 0
- <6>[ 0.777571] [audpp.c:audpp_probe] Number of decoder supported 5
- <6>[ 0.777603] [audpp.c:audpp_probe] Number of concurrency supported 8
- <6>[ 0.777628] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
- <6>[ 0.777653] [audpp.c:audpp_probe] queueid:13
- <6>[ 0.777674] [audpp.c:audpp_probe] decid:0
- <6>[ 0.777694] [audpp.c:audpp_probe] nr_codec_support:11
- <6>[ 0.777716] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
- <6>[ 0.777739] [audpp.c:audpp_probe] queueid:14
- <6>[ 0.777761] [audpp.c:audpp_probe] decid:1
- <6>[ 0.777781] [audpp.c:audpp_probe] nr_codec_support:11
- <6>[ 0.777803] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
- <6>[ 0.777826] [audpp.c:audpp_probe] queueid:15
- <6>[ 0.777848] [audpp.c:audpp_probe] decid:2
- <6>[ 0.777868] [audpp.c:audpp_probe] nr_codec_support:11
- <6>[ 0.777889] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
- <6>[ 0.777913] [audpp.c:audpp_probe] queueid:16
- <6>[ 0.777933] [audpp.c:audpp_probe] decid:3
- <6>[ 0.777954] [audpp.c:audpp_probe] nr_codec_support:11
- <6>[ 0.777976] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
- <6>[ 0.777999] [audpp.c:audpp_probe] queueid:17
- <6>[ 0.778021] [audpp.c:audpp_probe] decid:4
- <6>[ 0.778041] [audpp.c:audpp_probe] nr_codec_support:1
- <4>[ 0.781898] [VIB] platform driver register result : 0
- <6>[ 0.799861] ashmem: initialized
- <6>[ 0.802593] msgmni has been set to 555
- <6>[ 0.804406] io scheduler noop registered
- <6>[ 0.804583] io scheduler cfq registered (default)
- <3>[ 0.804674] fbaddr cmdline is null
- <3>[ 0.805336] msm_ion_client_create() return error, val ffffffed
- <4>[ 0.807518] @@@@@ lcdc_s6d16a0x_panel_init - panel_initialized = TRUE
- <4>[ 0.807551] ++++++lcdc_s6d16a0x_panel_init
- <4>[ 0.807649] ++++++pdev->id=0
- <4>[ 0.807774] @@@@@ s6d16a0x_esd_irq_handler - IRQ
- <4>[ 0.807951] @@@@@ s6d16a0x_probe - irq is requested normally
- <3>[ 0.813986] pm_runtime: fail to wake up
- <4>[ 0.839626] s6d16a0x_GIO start lcdc_s6d16a0x_panel_on
- <4>[ 0.839653] [HSIL] mdp_lcdc_on(317) mdp_lcdc_on end
- <6>[ 0.870473] Console: switching to colour frame buffer device 40x30
- <6>[ 0.881294] FrameBuffer[0] 320x480 size=1228800 bytes is registered successfully!
- <4>[ 0.881406] load_565rle_image: Can not open /initlogo.rle
- <7>[ 0.881953] Registered led device: lcd-backlight
- <4>[ 0.882044] --lcdc_s6d16a0x_panel_init
- <4>[ 0.882071] s6d16a0x_GIO start determine_lcd_type
- <4>[ 0.882478] ldi mtpdata: ff ff ff
- <4>[ 0.882493] lcd type is SMD
- <4>[ 0.882509] @@@@@ lcdc_s6d16a0x_panel_init - panel_initialized = FALSE
- <6>[ 0.883576] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
- <6>[ 0.899689] msm_serial_hs.1: ttyHS1 at MMIO 0xa0300000 (irq = 52) is a MSM HS UART
- <6>[ 0.919566] msm_serial_hs module loaded
- <6>[ 0.922369] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- <6>[ 0.930423] brd: module loaded
- <6>[ 0.935766] loop: module loaded
- <6>[ 0.936063] pmem: Initializing pmem (user-space) as cached
- <6>[ 0.936489] allocating 28794880 bytes at (null) (25a00000 physical) for pmem
- <6>[ 0.936656] pmem: Initializing pmem_adsp (user-space) as non-cached
- <6>[ 0.936984] allocating 10346496 bytes at (null) (27576000 physical) for pmem_adsp
- <6>[ 0.937131] pmem: Initializing pmem_audio (user-space) as non-cached
- <6>[ 0.937419] allocating 372736 bytes at (null) (27f54000 physical) for pmem_audio
- <6>[ 0.938851] SCSI Media Changer driver v0.25
- <6>[ 0.939074] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- <6>[ 0.939106] CSLIP: code copyright 1989 Regents of the University of California.
- <6>[ 0.940191] rmnet_init: SMD devices[8]
- <3>[ 0.948513] msm_hsusb_vbus_shutdown: vbus_shutdown rpc failed before call,rc = 0
- <3>[ 0.950139] msm_otg_probe: chg_init failed
- <6>[ 0.950474] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 0.950778] host driver registered w/ tranceiver
- <6>[ 0.951063] usbcore: registered new interface driver cdc_acm
- <6>[ 0.951088] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 0.951114] Initializing USB Mass Storage driver...
- <6>[ 0.951251] usbcore: registered new interface driver usb-storage
- <6>[ 0.951273] USB Mass Storage support registered.
- <6>[ 0.951384] usbcore: registered new interface driver usb_ehset_test
- <6>[ 0.951943] peripheral driver registered w/ tranceiver
- <6>[ 0.956901] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 0.956938] android_usb gadget: Number of LUNs=1
- <6>[ 0.956964] lun0: LUN: removable file: (no medium)
- <6>[ 0.957631] android_usb gadget: android_usb ready
- <6>[ 0.960103] diagchar initialized now[gpio_event_matrix_func:628] hw rev = 10
- <6>[ 0.960583] GPIO Matrix Keypad Driver: Start keypad matrix for sec_key in interrupt mode
- <6>[ 0.961178] input: sec_key as /devices/virtual/input/input0
- <7>[ 0.962563] RTC Registering with rs30000048
- <3>[ 0.963676] msm_rpc_client_req: RPC call was not successful (3)
- <7>[ 0.963708] msmrtc_setup_cb: RPC client registration for PROC:12 failed
- <7>[ 0.963739] rs30000048 rs30000048.65536: msmrtc_probe: Could not initialize RPC callback
- <7>[ 0.964286] msmrtc_tod_proc_result: 04/08/2013 17:45:35 (00)
- <6>[ 0.965148] using rtc device, msm_rtc, for alarms
- <7>[ 0.965178] msm_rtc: dev (254:0)
- <6>[ 0.965238] rs30000048 rs30000048.65536: rtc core: registered msm_rtc as rtc0
- <7>[ 0.966009] msmrtc_tod_proc_result: 03/11/2007 17:37:04 (06)
- <7>[ 0.966373] msm_rtc_secure: dev (254:1)
- <6>[ 0.966399] rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secure as rtc1
- <6>[ 0.966523] i2c /dev entries driver
- <6>[ 0.967931] [FSA9280]: probe
- <6>[ 0.967949] [FSA9280]: init
- <4>[ 0.969179] [FSA9280]: Initial control reg 0x02 : 0x1e
- <6>[ 0.979396] [FSA9280]: fsa9280 sensor init sequence done
- <6>[ 0.979504] [FSA9280]: probe complete
- <6>[ 0.979788] lirc_dev: IR Remote Control driver registered, major 246
- <6>[ 0.979814] IR NEC protocol handler initialized
- <6>[ 0.979834] IR RC5(x) protocol handler initialized
- <6>[ 0.979853] IR RC6 protocol handler initialized
- <6>[ 0.979873] IR JVC protocol handler initialized
- <6>[ 0.979891] IR Sony protocol handler initialized
- <6>[ 0.979911] IR RC5 (streamzap) protocol handler initialized
- <6>[ 0.979933] IR LIRC bridge handler initialized
- <6>[ 0.980738] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- <6>[ 0.981403] Bluetooth: MSM Sleep Mode Driver Ver 1.1
- <6>[ 0.983463] mmc0: mci-version: 0
- <3>[ 0.983638] mmc0: No card detect facilities available
- <6>[ 0.985163] mmc0: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 24,0 dma 8 dmacrcri 6
- <6>[ 0.985193] mmc0: 8 bit data mode disabled
- <6>[ 0.985213] mmc0: 4 bit data mode enabled
- <6>[ 0.985231] mmc0: polling status mode disabled
- <6>[ 0.985258] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
- <6>[ 0.985281] mmc0: Slot eject status = 0
- <6>[ 0.985299] mmc0: Power save feature enable = 1
- <6>[ 0.985326] mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x24a20000
- <6>[ 0.985356] mmc0: DM cmd busaddr 0x24a20000, cmdptr busaddr 0x24a37f40
- <6>[ 0.986648] mmc1: mci-version: 0
- <6>[ 0.987534] mmc1: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 26,0 dma 8 dmacrcri 7
- <6>[ 0.987564] mmc1: 8 bit data mode disabled
- <6>[ 0.987583] mmc1: 4 bit data mode enabled
- <6>[ 0.987601] mmc1: polling status mode disabled
- <6>[ 0.987626] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
- <6>[ 0.987649] mmc1: Slot eject status = 1
- <6>[ 0.987669] mmc1: Power save feature enable = 1
- <6>[ 0.987693] mmc1: DM non-cached buffer at ffd60000, dma_addr 0x24a40000
- <6>[ 0.987721] mmc1: DM cmd busaddr 0x24a40000, cmdptr busaddr 0x24a57f40
- <6>[ 0.988569] usbcore: registered new interface driver usbhid
- <6>[ 0.988593] usbhid: USB HID core driver
- <6>[ 0.989671] logger: created 256K log 'log_main'
- <6>[ 0.989954] logger: created 256K log 'log_events'
- <6>[ 0.990231] logger: created 256K log 'log_radio'
- <6>[ 0.990489] logger: created 256K log 'log_system'
- <4>[ 0.993579] [Silent Value] : 0
- <6>[ 0.995561] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
- <3>[ 0.996736] msm_soc: ALSA MSM Mixer Setting
- <6>[ 0.997603] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
- <6>[ 0.998649] ALSA device list:
- <6>[ 0.998671] #0: msm-audio
- <6>[ 0.998871] u32 classifier
- <6>[ 0.998891] Netfilter messages via NETLINK v0.30.
- <6>[ 0.999028] nf_conntrack version 0.5.0 (4443 buckets, 17772 max)
- <6>[ 0.999928] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 1.000208] xt_time: kernel timezone is -0000
- <6>[ 1.000658] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.000906] arp_tables: (C) 2002 David S. Miller
- <6>[ 1.001031] TCP cubic registered
- <6>[ 1.001554] NET: Registered protocol family 10
- <6>[ 1.005753] Mobile IPv6
- <6>[ 1.005846] IPv6 over IPv4 tunneling driver
- <6>[ 1.013766] NET: Registered protocol family 17
- <6>[ 1.014146] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 1.014186] Bluetooth: RFCOMM socket layer initialized
- <6>[ 1.014209] Bluetooth: RFCOMM ver 1.11
- <6>[ 1.020424] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 1.020449] Bluetooth: BNEP filters: protocol multicast
- <6>[ 1.020474] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 1.020684] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
- <6>[ 1.026301] clock_late_init() disabled 22 unused clocks
- <6>[ 1.026448] cpufreq: cpu0 init at 400000 switching to 320000
- <7>[ 1.028371] msmrtc_tod_proc_result: 04/08/2013 17:45:35 (00)
- <6>[ 1.028418] rs30000048 rs30000048.65536: setting system clock to 2013-04-08 17:45:35 UTC (1365443135)
- <4>[ 1.033908] multipdp_init:multipdp_rx_noti_regi calling
- <4>[ 1.039676] Warning: unable to open an initial console.
- <6>[ 1.040033] Freeing init memory: 168K
- <3>[ 1.057528] init: /init.rc: 73: invalid option 'enabled'
- <4>[ 1.134778] pdp_activate(): ttyCSD(id: 1) serial device is created.
- <4>[ 1.135079] pdp_activate(): ttyEFS(id: 8) serial device is created.
- <4>[ 1.135274] pdp_activate(): ttyGPS(id: 5) serial device is created.
- <4>[ 1.135464] pdp_activate(): ttyXTRA(id: 6) serial device is created.
- <4>[ 1.135661] pdp_activate(): ttySMD(id: 25) serial device is created.
- <3>[ 1.160239] android_usb: already disabled
- <3>[ 1.160466] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
- <3>[ 1.160561] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
- <3>[ 1.160648] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
- <3>[ 1.160856] init: skipping insecure file '/lib/modules/rfs_glue.ko'
- <3>[ 1.160893] init: skipping insecure file '/lib/modules/rfs_fat.ko'
- <3>[ 1.161528] init: Unable to open persistent property directory /data/property errno: 2
- <6>[ 1.169593] adb_open
- <6>[ 1.169618] adb_bind_config
- <4>[ 1.367988] mmc0: host does not support reading read-only switch. assuming write-enable.
- <6>[ 1.373073] mmc0: new high speed SDHC card at address 0007
- <6>[ 1.373709] mmcblk0: mmc0:0007 SD16G 14.9 GiB
- <6>[ 1.375921] mmcblk0: p1 p2 p3
- <6>[ 1.409831] android_work: did not send uevent (0 0 (null))
- <6>[ 1.720839] android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 1.723678] android_usb gadget: high speed config #1: android
- <6>[ 1.723869] android_work: sent uevent USB_STATE=CONFIGURED
- <6>[ 2.409584]
- <6>[ 2.409599] Charger Type: STD DOWNSTREAM PORT
- <4>[ 20.146156] adbd (82): /proc/82/oom_adj is deprecated, please use /proc/82/oom_score_adj instead.
- <4>[ 28.069269] fsr: module license 'Samsung Proprietary' taints kernel.
- <4>[ 28.069298] Disabling lock debugging due to kernel taint
- <4>[ 28.086856] [BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
- <4>[ 28.086878] [PAM:aaaaaaaa ] ++FSR_PAM_Init
- <4>[ 28.086924] [PAM: ] --FSR_PAM_Init
- <4>[ 28.087064] [BIF: ] FSR VERSION: FSR_1.2.1p1_b129_RTM
- <4>[ 28.087099] [OND:INF] FSR_OND_4K_Open(nDev:0, pParam:0xd157fdf8, nFlag:0x00000000) / 1096 line
- <4>[ 28.087116] pstOND4kCxt->nBaseAddr: 0x00000000
- <4>[ 28.087136] nDev=0, nMID=0x00ec, nDID=0x0050, nVID=0x0241
- <4>[ 28.087153] [OND:INF] pstOND4kCxt->nSysConf1:0x80fe / 1179 line
- <4>[ 28.087169] [OND:INF] pstOND4kCxt->nBlksForSLCArea[0]:2048 / 1196 line
- <4>[ 28.087654] [OND:INF] Transfered 4096 bytes to DataRAM in 448 usec
- <4>[ 28.087668] calculated Word Write Cycle: 217 nano second
- <4>[ 28.087919] [OND:INF] Transfered 4096 bytes from DataRAM in 235 usec
- <4>[ 28.087933] calculated Word Read Cycle: 114 nano second
- <4>[ 28.087948] [OND:INF] pstOND4kCxt->nIntID :0x0000 / 1294 line
- <4>[ 28.087961] [OND:INF] 1X_CACHEPGM CMD : 0x007f
- <4>[ 28.087973] [OND:INF] 1X_PLOAD CMD : 0x0003
- <4>[ 38.611403] [OND:ERR] busy wait time-out FSR_OND_4K_IOCtl(), 4749 line
- <4>[ 38.611424]
- <4>[ 38.611429] start dumping registers.
- <4>[ 38.611444] Manufacturer ID Reg. @ 0x0001E000: 0x00EC
- <4>[ 38.611459] Device ID Reg. @ 0x0001E002: 0x0050
- <4>[ 38.611474] Version ID Reg. @ 0x0001E004: 0x0241
- <4>[ 38.611489] Data Buffer Size Reg. @ 0x0001E006: 0x0800
- <4>[ 38.611504] Boot Buffer Size Reg. @ 0x0001E008: 0x0200
- <4>[ 38.611519] Amount of buffers Reg. @ 0x0001E00A: 0x0101
- <4>[ 38.611534] Technology Reg. @ 0x0001E00C: 0x0000
- <4>[ 38.611549] Start address 1 Reg. @ 0x0001E200: 0x0082
- <4>[ 38.611564] Start address 2 Reg. @ 0x0001E202: 0x0000
- <4>[ 38.611579] Start address 8 Reg. @ 0x0001E20E: 0x0014
- <4>[ 38.611594] Start Buffer Reg. @ 0x0001E400: 0x0800
- <4>[ 38.611609] Command Reg. @ 0x0001E440: 0x0000
- <4>[ 38.611624] System Conf1 Reg. @ 0x0001E442: 0x80FE
- <4>[ 38.611639] Controller Status Reg. @ 0x0001E480: 0x0000
- <4>[ 38.611656] Interrupt Reg. @ 0x0001E482: 0x8080
- <4>[ 38.611671] Start Block Address Reg. @ 0x0001E498: 0x07D3
- <4>[ 38.611686] Write Protection Reg. @ 0x0001E49C: 0x0004
- <4>[ 38.611701] ECC Status 1 Reg. @ 0x0001FE00: 0x0000
- <4>[ 38.611716] ECC Status 2 Reg. @ 0x0001FE02: 0x0000
- <4>[ 38.611731] ECC Status 3 Reg. @ 0x0001FE04: 0x0000
- <4>[ 38.611746] ECC Status 4 Reg. @ 0x0001FE06: 0x0000
- <4>[ 38.611758] end dumping registers.
- <4>[ 38.611763]
- <4>[ 38.611778] Dump Spare Buffer [die:0]
- <4>[ 38.611788] [00] ffff ffff ffc5 7fff 054a f106 03ef aa72
- <4>[ 38.611826] [01] 003a ffff ffff 3fff c9fb 8175 a95f a751
- <4>[ 38.611864] [02] fdef 0210 dc6d ffff f31f e685 d5fd 82db
- <4>[ 38.611903] [03] 5ab8 8deb cc49 3fff 17f7 fc7c b6ef 6070
- <4>[ 38.611941] [04] 004c 0000 ffb3 7fff 49a5 9afa 6d49 c0df
- <4>[ 38.611979] [05] ffff 688e 81cc bfff a828 b5dd 4414 e81b
- <4>[ 38.612018] [06] fff4 b83a 2cc3 ffff 344b 9afa 2905 b736
- <4>[ 38.612056] [07] 0000 d33c ffff 3fff c07d f04e 379e 32e1
- <4>[ 38.612094]
- <4>[ 38.612103] [OND:IN ] ++_DumpCmdLog()
- <4>[ 38.612109]
- <4>[ 38.612119] [OND:INF] pstOND4kCxt->nFlushOpCaller : 1
- <4>[ 38.612131] [OND:INF] start printing nLog : nDev[0]
- <4>[ 38.612146] nLog preOp prePbn prePg preFlag
- <4>[ 38.612163] 2| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612178] 3| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612193] 4| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612208] 5| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612223] 6| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612238] 7| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612253] 8| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612268] 9| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612283] 10| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612299] 11| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612314] 12| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612329] 13| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612344] 14| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612359] 15| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612374] 16| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612389] 17| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612404] 18| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612419] 19| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612434] 20| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612449] 21| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612464] 22| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612479] 23| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612494] 24| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612509] 25| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612524] 26| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612539] 27| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612554] 28| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612569] 29| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612584] 30| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612601] 31| NONE , 0x00000000, 0x00000000, 0x00000000
- <4>[ 38.612616] 0| READ , 0x00000000, 0x0000003c, 0x00000449
- <4>[ 38.612631] 1| NONE , 0x00000000, 0x0000003c, 0x000004c8
- <4>[ 38.612644] [OND: ] end printing nLog : nDev[0]
- <4>[ 38.612656]
- <4>[ 38.612659] [OND:INF] start printing OneNAND4kCxt: nDev[0]
- <4>[ 38.612674] nPreOp : [0x00000000, 0x00000000]
- <4>[ 38.612689] nPreOpPbn : [0x00000000, 0x0000ffff]
- <4>[ 38.612704] nPreOpPgOffset : [0x0000003c, 0x0000ffff]
- <4>[ 38.612719] nPreOpFlag : [0x000004c8, 0x00000000]
- <4>[ 38.612733] end printing OneNAND4kCxt: nDev[0]
- <4>[ 38.612739]
- <4>[ 38.612748] [OND:OUT] --_DumpCmdLog()
- <4>[ 38.612823] [BBM:INF] Scan from 2004 to 2047 to find BML meta blocks (die: 0)
- <4>[ 38.613139] [BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
- <4>[ 38.616061] [BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
- <4>[ 38.618983] [BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
- <4>[ 38.623166] [BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
- <4>[ 38.626093] [BBM:INF] ffff ffff ffff ffff
- <4>[ 38.626983] [BBM:ERR] NO UPCB(1st Sbn: 2004, Last Sbn: 2047)
- <4>[ 38.626996] [BBM:ERR] _ScanReservoir(nPDev: 0, nDie:0) is failed
- <4>[ 38.627009] [BBM:ERR] _Mount(nDie:0) is failed
- <4>[ 38.627024] [BIF:ERR] _MountRsvr(nVol: 0) / 2169 line
- <4>[ 38.627036] [BIF:ERR] FSR_BBM_Mount(nPDev: 0)
- <4>[ 38.627053] [BIF:ERR] FSR_BML_Open(nVol:0, nFlag:0x0, nRe: 0x90330000)
- <4>[ 38.627084] LinuStoreIII_NERR: bml_blkdev_create[553] No such device or address, 0(0x90330000)
- <4>[ 38.627098] BML: Registered BML Driver.
- <4>[ 38.627109] [fsr_init] BML functions for DGS are initialized
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement