Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: sending 0x0a
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: receiving 0x0a
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: storing 0x0a at 2 of 6 total
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: receiving 0x08
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: storing 0x08 at 4 of 6 total
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: receiving 0x0c
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: storing 0x0c at 5 of 6 total
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x0a, size:0x04, status:0x00
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: payload #[0]: 0x08
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: payload #[1]: 0x0c
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x02, size:0x02
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: storing 0x02 at 2 of 6 total
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: receiving 0x63
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: storing 0x63 at 4 of 6 total
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: storing 0x00 at 5 of 6 total
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x02, size:0x04, status:0x00
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: payload #[0]: 0x63
- 08/13/2011 22:25:12 [DEBUG] nvec nvec.0: payload #[1]: 0x00
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x06, size:0x02
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: sending 0x06
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x06
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: storing 0x06 at 2 of 6 total
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0xb4
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: storing 0xb4 at 4 of 6 total
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: storing 0x00 at 5 of 6 total
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x06, size:0x04, status:0x00
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: payload #[0]: 0xb4
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: payload #[1]: 0x00
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x00, size:0x02
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: sending 0x00
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: storing 0x00 at 2 of 6 total
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x05
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: storing 0x05 at 4 of 6 total
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x06
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: storing 0x06 at 5 of 6 total
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x00, size:0x04, status:0x00
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: payload #[0]: 0x05
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: payload #[1]: 0x06
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x01, size:0x02
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: sending 0x01
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: storing 0x01 at 2 of 6 total
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x5c
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: storing 0x5c at 4 of 6 total
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: receiving 0x1c
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: storing 0x1c at 5 of 6 total
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x01, size:0x04, status:0x00
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: payload #[0]: 0x5c
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: payload #[1]: 0x1c
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x03, size:0x02
- 08/13/2011 22:25:27 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: sending 0x03
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x03
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: storing 0x03 at 2 of 6 total
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x5f
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: storing 0x5f at 4 of 6 total
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0xfd
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: storing 0xfd at 5 of 6 total
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x03, size:0x04, status:0x00
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: payload #[0]: 0x5f
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: payload #[1]: 0xfd
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Sendind cmd:0x01, subcmd:0x00, size:0x02
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: sending 0x01
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: sending 0x00
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x06
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: storing 0x00 at 2 of 8 total
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 8 total
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: storing 0x00 at 4 of 8 total
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: storing 0x00 at 5 of 8 total
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: storing 0x00 at 6 of 8 total
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: storing 0x00 at 7 of 8 total
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: got an command 0x01
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Received cmd:0x01, subcmd:0x00, size:0x06, status:0x00
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: payload #[0]: 0x00
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: payload #[1]: 0x00
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: payload #[2]: 0x00
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: payload #[3]: 0x00
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x04, size:0x02
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: sending 0x04
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: storing 0x04 at 2 of 6 total
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0x5f
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: storing 0x5f at 4 of 6 total
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: receiving 0xfd
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: storing 0xfd at 5 of 6 total
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x04, size:0x04, status:0x00
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: payload #[0]: 0x5f
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: payload #[1]: 0xfd
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x0a, size:0x02
- 08/13/2011 22:25:28 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: sending 0x0a
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x0a
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: storing 0x0a at 2 of 6 total
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x08
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: storing 0x08 at 4 of 6 total
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x0c
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: storing 0x0c at 5 of 6 total
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x0a, size:0x04, status:0x00
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: payload #[0]: 0x08
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: payload #[1]: 0x0c
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x02, size:0x02
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: storing 0x02 at 2 of 6 total
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x63
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: storing 0x63 at 4 of 6 total
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: storing 0x00 at 5 of 6 total
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x02, size:0x04, status:0x00
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: payload #[0]: 0x63
- 08/13/2011 22:25:29 [DEBUG] nvec nvec.0: payload #[1]: 0x00
- 08/13/2011 22:25:32 [WARNING] select 897 (android.youtube), adj 13, size 8374, to kill
- 08/13/2011 22:25:32 [WARNING] send sigkill to 897 (android.youtube), adj 13, size 8374
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x06, size:0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x06
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x06
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x06 at 2 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0xb4
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0xb4 at 4 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x00 at 5 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x06, size:0x04, status:0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: payload #[0]: 0xb4
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: payload #[1]: 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x00, size:0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x00 at 2 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x05
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x05 at 4 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x06
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x06 at 5 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x00, size:0x04, status:0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: payload #[0]: 0x05
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: payload #[1]: 0x06
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x01, size:0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x01
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x01 at 2 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x45
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x45 at 4 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x1c
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x1c at 5 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x01, size:0x04, status:0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: payload #[0]: 0x45
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: payload #[1]: 0x1c
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x03, size:0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x03
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x03
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x03 at 2 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x4a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x4a at 4 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0xfd
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0xfd at 5 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x03, size:0x04, status:0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: payload #[0]: 0x4a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: payload #[1]: 0xfd
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Sendind cmd:0x01, subcmd:0x00, size:0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x01
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x06
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x00 at 2 of 8 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 8 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x00 at 4 of 8 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x00 at 5 of 8 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x00 at 6 of 8 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x00 at 7 of 8 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: got an command 0x01
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Received cmd:0x01, subcmd:0x00, size:0x06, status:0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: payload #[0]: 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: payload #[1]: 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: payload #[2]: 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: payload #[3]: 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x04, size:0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: sending 0x04
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x04 at 2 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0x4a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0x4a at 4 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: receiving 0xfd
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: storing 0xfd at 5 of 6 total
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x04, size:0x04, status:0x00
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: payload #[0]: 0x4a
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: payload #[1]: 0xfd
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x0a, size:0x02
- 08/13/2011 22:25:44 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: sending 0x0a
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x0a
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: storing 0x0a at 2 of 6 total
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x08
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: storing 0x08 at 4 of 6 total
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x0c
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: storing 0x0c at 5 of 6 total
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x0a, size:0x04, status:0x00
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: payload #[0]: 0x08
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: payload #[1]: 0x0c
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x02, size:0x02
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: storing 0x02 at 2 of 6 total
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x63
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: storing 0x63 at 4 of 6 total
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: storing 0x00 at 5 of 6 total
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x02, size:0x04, status:0x00
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: payload #[0]: 0x63
- 08/13/2011 22:25:45 [DEBUG] nvec nvec.0: payload #[1]: 0x00
- 08/13/2011 22:25:59 [WARNING] AR6000 Neighbor Report Event
- 08/13/2011 22:25:59 [WARNING] bssid bc:05:43:6d:82:f8
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x06, size:0x02
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: sending 0x06
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x06
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: storing 0x06 at 2 of 6 total
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0xb4
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: storing 0xb4 at 4 of 6 total
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: storing 0x00 at 5 of 6 total
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x06, size:0x04, status:0x00
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: payload #[0]: 0xb4
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: payload #[1]: 0x00
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x00, size:0x02
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: sending 0x00
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000001a
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: SMBus block read end
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: everything transfered - msg unqueued (sent:3,req:3
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x02
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x04
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: Could be SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: stored as 1st byte: Jump to state 4
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: storing 0x00 at 2 of 6 total
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x00
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: storing 0x00 at 3 of 6 total
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x05
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: storing 0x05 at 4 of 6 total
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x06
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: storing 0x06 at 5 of 6 total
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000018
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 4: SMBus block write,SMBus word write or SMBus byte writ
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: completed a SMBus write block
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: got an command 0x02
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: Received cmd:0x02, subcmd:0x00, size:0x04, status:0x00
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: payload #[0]: 0x05
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: payload #[1]: 0x06
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x01, size:0x02
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000000c
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x8a
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 0: Waiting for SMBus start
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: SMBus address matches, jump to state 1
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x00000008
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: receiving 0x01
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 1: Waiting for SMBus command
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: Flags matching, jump to state 2
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000000e
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 2: Try to differenciate between transactions
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: Detected an SMBus block read: Jumping to state 3
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: sending 0x02
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000000a
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: sending 0x01
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: irq status: 0x0000001c
- 08/13/2011 22:26:01 [DEBUG] nvec nvec.0: State 3: SMBus block read
- 08/13/2011 22:26:01 [ERROR] nvec nvec.0: unexpected flags 0x1c: Jump to state 0
- 08/13/2011 22:26:02 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:02 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:02 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:03 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:03 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:03 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:04 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:04 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:04 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:05 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:05 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:05 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:06 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:06 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:06 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:07 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:07 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:07 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:08 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:08 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:08 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:09 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:09 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:09 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:10 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:10 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:10 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:10 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:26:10 [ERROR] nvec-power nvec-power.1: unable to get Battery voltage
- 08/13/2011 22:26:10 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x03, size:0x02
- 08/13/2011 22:26:10 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:11 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:11 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:11 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:12 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:12 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:12 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:13 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:13 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:13 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:14 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:14 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:14 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:15 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:15 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:15 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:16 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:16 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:16 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:17 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:17 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:17 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:18 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:18 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:18 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:19 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:19 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:19 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:19 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:26:19 [ERROR] nvec-power nvec-power.1: unable to get Battery current
- 08/13/2011 22:26:19 [DEBUG] nvec nvec.0: Sendind cmd:0x01, subcmd:0x00, size:0x02
- 08/13/2011 22:26:19 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:20 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:20 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:20 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:21 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:21 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:21 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:22 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:22 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:22 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:23 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:23 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:23 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:24 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:24 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:24 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:25 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:25 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:25 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:26 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:26 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:26 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:27 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:27 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:27 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:28 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:28 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:28 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:28 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:26:28 [ERROR] nvec-power nvec-power.1: unable to get AC line status
- 08/13/2011 22:26:28 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x04, size:0x02
- 08/13/2011 22:26:28 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:29 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:29 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:29 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:30 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:30 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:30 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:31 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:31 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:31 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:32 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:32 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:32 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:33 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:33 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:33 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:34 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:34 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:34 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:35 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:35 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:35 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:36 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:36 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:36 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:37 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:37 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:37 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:37 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:26:37 [ERROR] nvec-power nvec-power.1: unable to get Battery average current
- 08/13/2011 22:26:37 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x0a, size:0x02
- 08/13/2011 22:26:37 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:38 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:38 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:38 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:38 [WARNING] select 1155 (.android.finsky), adj 15, size 9993, to kill
- 08/13/2011 22:26:38 [WARNING] send sigkill to 1155 (.android.finsky), adj 15, size 9993
- 08/13/2011 22:26:39 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:39 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:39 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:40 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:40 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:40 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:41 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:41 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:41 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:42 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:42 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:42 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:43 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:43 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:43 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:44 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:44 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:45 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:45 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:45 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:46 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:46 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:46 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:46 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:26:46 [ERROR] nvec-power nvec-power.1: unable to get Battery temperature
- 08/13/2011 22:26:46 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x02, size:0x02
- 08/13/2011 22:26:46 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:47 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:47 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:47 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:48 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:48 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:48 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:49 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:49 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:49 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:50 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:50 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:50 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:51 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:51 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:51 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:52 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:52 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:52 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:53 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:53 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:53 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:54 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:54 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:54 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:55 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:26:55 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:26:55 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:26:55 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:26:55 [ERROR] nvec-power nvec-power.1: unable to get Battery remaining time
- 08/13/2011 22:27:10 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x06, size:0x02
- 08/13/2011 22:27:10 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:11 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:27:11 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:11 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:12 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:27:12 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:12 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:13 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:27:13 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:13 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:14 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:27:14 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:14 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:15 [WARNING] select 975 (droid.gsf.login), adj 12, size 5602, to kill
- 08/13/2011 22:27:15 [WARNING] select 1219 (d.process.acore), adj 13, size 7747, to kil
- 08/13/2011 22:27:15 [WARNING] send sigkill to 1219 (d.process.acore), adj 13, size 774
- 08/13/2011 22:27:15 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:27:15 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:15 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:16 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:27:16 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:16 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:17 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:27:17 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:17 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:18 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:27:18 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:18 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:19 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvE
- 08/13/2011 22:27:19 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:19 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:19 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:27:19 [ERROR] nvec-power nvec-power.1: unable to get Battery remaining capacit
- 08/13/2011 22:27:19 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x00, size:0x02
- 08/13/2011 22:27:19 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:20 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:20 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:20 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:21 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:21 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:21 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:22 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:22 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:22 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:23 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:23 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:23 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:24 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:24 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:24 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:25 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:25 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:25 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:25 [WARNING] AR6000 Neighbor Report Event
- 08/13/2011 22:27:25 [WARNING] bssid bc:05:43:6d:82:f8
- 08/13/2011 22:27:26 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:26 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:26 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:27 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:27 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:27 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:28 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:28 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:28 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:28 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:27:28 [ERROR] nvec-power nvec-power.1: unable to get Battery status
- 08/13/2011 22:27:28 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x01, size:0x02
- 08/13/2011 22:27:28 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:29 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:29 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:29 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:30 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:30 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:30 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:31 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:31 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:31 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:32 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:32 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:32 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:33 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:33 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:33 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:34 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:34 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:34 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:35 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:35 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:35 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:36 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:36 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:36 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:37 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:37 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:37 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:37 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:27:37 [ERROR] nvec-power nvec-power.1: unable to get Battery voltage
- 08/13/2011 22:27:37 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x03, size:0x02
- 08/13/2011 22:27:37 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:38 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:38 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:38 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:39 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:39 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:39 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:40 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:40 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:40 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:41 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:41 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:41 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:42 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:42 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:42 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:43 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:43 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:43 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:44 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:44 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:45 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:45 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:45 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:46 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:46 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:46 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:46 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:27:46 [ERROR] nvec-power nvec-power.1: unable to get Battery current
- 08/13/2011 22:27:46 [DEBUG] nvec nvec.0: Sendind cmd:0x01, subcmd:0x00, size:0x02
- 08/13/2011 22:27:46 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:47 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:47 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:47 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:48 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:48 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:48 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:49 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:49 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:49 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:50 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:50 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:50 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:51 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:51 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:51 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:52 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:52 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:52 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:53 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:53 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:53 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:54 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:54 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:55 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:56 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:56 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:56 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:56 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:27:56 [ERROR] nvec-power nvec-power.1: unable to get AC line status
- 08/13/2011 22:27:56 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x04, size:0x02
- 08/13/2011 22:27:56 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:57 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:57 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:57 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:58 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:58 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:58 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:27:59 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:27:59 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:27:59 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:00 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:00 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:00 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:01 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:01 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:01 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:02 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:02 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:02 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:03 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:03 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:03 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:04 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:04 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:04 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:05 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:05 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:05 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:05 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:28:05 [ERROR] nvec-power nvec-power.1: unable to get Battery average current
- 08/13/2011 22:28:05 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x0a, size:0x02
- 08/13/2011 22:28:05 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:06 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:06 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:06 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:07 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:07 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:07 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:08 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:08 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:08 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:09 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:09 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:09 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:10 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:10 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:10 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:11 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:11 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:11 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:12 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:12 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:12 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:13 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:13 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:13 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:14 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:14 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:14 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:14 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:28:14 [ERROR] nvec-power nvec-power.1: unable to get Battery temperature
- 08/13/2011 22:28:14 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x02, size:0x02
- 08/13/2011 22:28:14 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:15 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:15 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:15 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:16 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:16 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:16 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:17 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:17 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:17 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:18 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:18 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:18 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:19 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:19 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:19 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:20 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:20 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:20 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:21 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:21 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:21 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:22 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:22 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:22 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:23 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:23 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:23 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:23 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:28:23 [ERROR] nvec-power nvec-power.1: unable to get Battery remaining time
- 08/13/2011 22:28:38 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x06, size:0x02
- 08/13/2011 22:28:38 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:39 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:39 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:39 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:40 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:40 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:40 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:41 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:41 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:41 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:42 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:42 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:42 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:43 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:43 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:43 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:44 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:44 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:45 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:45 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:45 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:46 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:46 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:46 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:47 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:47 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:47 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:47 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:28:47 [ERROR] nvec-power nvec-power.1: unable to get Battery remaining capacit
- 08/13/2011 22:28:47 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x00, size:0x02
- 08/13/2011 22:28:47 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:48 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:48 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:48 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:49 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:49 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:49 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:50 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:50 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:50 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:51 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:51 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:51 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:52 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:52 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:52 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:53 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:53 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:53 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:54 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:54 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:54 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:55 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:55 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:55 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:56 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:56 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:56 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:56 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:28:56 [ERROR] nvec-power nvec-power.1: unable to get Battery status
- 08/13/2011 22:28:56 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x01, size:0x02
- 08/13/2011 22:28:56 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:57 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:57 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:57 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:58 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:58 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:58 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:28:59 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:28:59 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:28:59 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:00 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:00 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:00 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:01 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:01 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:01 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:02 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:02 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:02 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:03 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:03 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:03 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:04 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:04 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:04 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:05 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:05 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:05 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:05 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:29:05 [ERROR] nvec-power nvec-power.1: unable to get Battery voltage
- 08/13/2011 22:29:05 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x03, size:0x02
- 08/13/2011 22:29:05 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:06 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:06 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:06 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:07 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:07 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:07 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:08 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:08 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:08 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:09 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:09 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:09 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:10 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:10 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:10 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:11 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:11 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:11 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:12 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:12 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:12 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:13 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:13 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:13 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:14 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:14 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:14 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:14 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:29:14 [ERROR] nvec-power nvec-power.1: unable to get Battery current
- 08/13/2011 22:29:14 [DEBUG] nvec nvec.0: Sendind cmd:0x01, subcmd:0x00, size:0x02
- 08/13/2011 22:29:14 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:15 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:15 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:15 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:16 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:16 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:16 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:17 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:17 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:17 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:18 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:18 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:18 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:19 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:19 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:19 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:20 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:20 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:20 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:21 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:21 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:21 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:22 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:22 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:22 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:23 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:23 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:23 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:23 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:29:23 [ERROR] nvec-power nvec-power.1: unable to get AC line status
- 08/13/2011 22:29:23 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x04, size:0x02
- 08/13/2011 22:29:23 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:24 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:24 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:24 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:25 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:25 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:25 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:26 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:26 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:26 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:27 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:27 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:27 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:28 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:28 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:28 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:29 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:29 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:29 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:30 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:30 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:30 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:31 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:31 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:31 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:32 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:32 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:32 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:32 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:29:32 [ERROR] nvec-power nvec-power.1: unable to get Battery average current
- 08/13/2011 22:29:32 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x0a, size:0x02
- 08/13/2011 22:29:32 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:33 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:33 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:33 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:34 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:34 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:34 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:35 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:35 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:35 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:36 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:36 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:36 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:37 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:37 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:37 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:38 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:38 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:38 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:39 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:39 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:39 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:40 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:40 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:40 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:41 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:41 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:41 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:41 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:29:41 [ERROR] nvec-power nvec-power.1: unable to get Battery temperature
- 08/13/2011 22:29:41 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x02, size:0x02
- 08/13/2011 22:29:41 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:42 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:42 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:42 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:43 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:43 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:43 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:44 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:44 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:45 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:45 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:45 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:46 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:46 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:46 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:47 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:47 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:47 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:48 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:48 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:48 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:49 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:49 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:50 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:51 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:29:51 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:29:51 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:29:51 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:29:51 [ERROR] nvec-power nvec-power.1: unable to get Battery remaining time
- 08/13/2011 22:30:06 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x06, size:0x02
- 08/13/2011 22:30:06 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:07 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:07 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:07 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:08 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:08 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:08 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:09 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:09 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:09 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:10 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:10 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:10 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:11 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:11 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:11 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:12 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:12 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:12 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:13 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:13 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:13 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:14 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:14 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:14 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:15 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:15 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:15 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:15 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:30:15 [ERROR] nvec-power nvec-power.1: unable to get Battery remaining capacit
- 08/13/2011 22:30:15 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x00, size:0x02
- 08/13/2011 22:30:15 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:16 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:16 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:16 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:17 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:17 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:17 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:18 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:18 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:18 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:19 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:19 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:19 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:20 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:20 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:20 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:21 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:21 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:21 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:22 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:22 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:22 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:23 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:23 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:23 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:24 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:24 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:24 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:24 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:30:24 [ERROR] nvec-power nvec-power.1: unable to get Battery status
- 08/13/2011 22:30:24 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x01, size:0x02
- 08/13/2011 22:30:24 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:25 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:25 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:25 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:26 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:26 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:26 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:27 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:27 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:27 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:28 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:28 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:28 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:29 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:29 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:29 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:30 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:30 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:30 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:31 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:31 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:31 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:32 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:32 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:32 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:33 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:33 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:33 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:33 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:30:33 [ERROR] nvec-power nvec-power.1: unable to get Battery voltage
- 08/13/2011 22:30:33 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x03, size:0x02
- 08/13/2011 22:30:33 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:34 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:34 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:34 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:35 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:35 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:35 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:36 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:36 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:36 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:37 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:37 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:37 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:38 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:38 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:38 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:39 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:39 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:39 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:40 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:40 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:40 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:41 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:41 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:41 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:42 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:42 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:42 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:42 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:30:42 [ERROR] nvec-power nvec-power.1: unable to get Battery current
- 08/13/2011 22:30:42 [DEBUG] nvec nvec.0: Sendind cmd:0x01, subcmd:0x00, size:0x02
- 08/13/2011 22:30:42 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:43 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:43 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:43 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:44 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:44 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:44 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:45 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:45 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:45 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:46 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:46 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:46 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:47 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:47 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:47 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:48 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:48 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:48 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:49 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:49 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:49 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:50 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:50 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:50 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:51 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:51 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:51 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:51 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:30:51 [ERROR] nvec-power nvec-power.1: unable to get AC line status
- 08/13/2011 22:30:51 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x04, size:0x02
- 08/13/2011 22:30:51 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:52 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:52 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:52 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:53 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:53 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:53 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:54 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:54 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:54 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:55 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:55 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:55 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:55 [WARNING] AR6000 Neighbor Report Event
- 08/13/2011 22:30:55 [WARNING] bssid bc:05:43:6d:82:f8
- 08/13/2011 22:30:56 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:56 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:56 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:57 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:57 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:57 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:58 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:58 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:58 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:30:59 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:30:59 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:30:59 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:31:00 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:31:00 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:31:00 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:31:00 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:31:00 [ERROR] nvec-power nvec-power.1: unable to get Battery average current
- 08/13/2011 22:31:00 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x0a, size:0x02
- 08/13/2011 22:31:00 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:31:01 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:31:01 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:31:01 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:31:02 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:31:02 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:31:02 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:31:03 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:31:03 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:31:03 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:31:04 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:31:04 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:31:04 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:31:05 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:31:05 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:31:05 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:31:06 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:31:06 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:31:06 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:31:07 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:31:07 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:31:07 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:31:08 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:31:08 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:31:08 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:31:09 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:31:09 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:31:09 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:31:09 [ERROR] nvec nvec.0: timeout waiting for sync write to complete
- 08/13/2011 22:31:09 [ERROR] nvec-power nvec-power.1: unable to get Battery temperature
- 08/13/2011 22:31:09 [DEBUG] nvec nvec.0: Sendind cmd:0x02, subcmd:0x02, size:0x02
- 08/13/2011 22:31:09 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:31:10 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:31:10 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:31:10 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:31:11 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:31:11 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:31:11 [DEBUG] nvec nvec.0: gpio -> low
- 08/13/2011 22:31:12 [DEBUG] nvec nvec.0: command xfer timed out - toggling gpio to wake NvEC
- 08/13/2011 22:31:12 [DEBUG] nvec nvec.0: gpio -> high
- 08/13/2011 22:31:12 [DEBUG] nvec nvec.0: gpio -> low
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement