Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- IP: 10.42.1.11/255.255.255.0, Gateway: 0.0.0.0
- Default server: 10.42.1.1
- RedBoot> load -b 0x200000 kernel-nfs
- Using default protocol (TFTP)
- Address offset = 0x40000000
- Entry point: 0x00200100, address range: 0x00200000-0x0067a0a8
- RedBoot> go
- KDB: debugger backends: ddb
- KDB: current backend: ddb
- Copyright (c) 1992-2012 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 9.1-RELEASE #14: Sat Oct 19 13:39:32 CEST 2013
- root@gateworks:/usr/obj/arm.armeb/usr/src/sys/AVILA arm
- CPU: IXP425 533MHz rev 1 (ARMv5TE) (XScale core)
- DC enabled IC enabled WB enabled LABT branch prediction enabled
- 32KB/32B 32-way Instruction cache
- 32KB/32B 32-way write-back-locking Data cache
- real memory = 67108864 (64 MB)
- avail memory = 57380864 (54 MB)
- ixp0: <Intel IXP4XX> on motherboard
- ixp0: 37fff<RCOMP,USB,HASH,AES,DES,HDLC,AAL,HSS,UTOPIA,ETH0,ETH1,PCI>
- pcib0: <IXP4XX PCI Bus> on ixp0
- pci0: <PCI bus> on pcib0
- ath0: <Atheros 9280> irq 28 at device 1.0 on pci0
- ath0: AR9280 mac 128.2 RF5133 phy 13.0
- ath1: <Atheros 2413> irq 27 at device 2.0 on pci0
- ath1: AR2413 mac 7.8 RF2413 phy 4.5
- ixpclk0: <IXP4XX Timer> on ixp0
- ixpiic0: <IXP4XX GPIO-Based I2C Interface> on ixp0
- iicbb0: <I2C bit-banging driver> on ixpiic0
- iicbus0: <Philips I2C bus> on iicbb0 master-only
- iic0: <I2C generic I/O> on iicbus0
- ad74180: <Analog Devices AD7418 ADC> at addr 0x50 on iicbus0
- ds1672_rtc0: <Dallas Semiconductor DS1672 RTC> at addr 0xd0 on iicbus0
- ixpwdog0: <IXP4XX Watchdog Timer> on ixp0
- uart0: <Non-standard ns8250 class UART with FIFOs> on ixp0
- uart0: console (115200,n,8,1)
- uart1: <Non-standard ns8250 class UART with FIFOs> on ixp0
- ixpqmgr0: <IXP4XX Q-Manager> on ixp0
- npe0: <IXP NPE-B> on ixp0
- npe0: MAC at 0xc8009000
- npe0: MII at 0xc8009000
- npe0: load fw image IXP425.NPE-B Func 0x2 Rev 2.1
- miibus0: <MII bus> on npe0
- ukphy0: <Generic IEEE 802.3u media interface> PHY 2 on miibus0
- ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
- npe0: Ethernet address: 00:d0:12:03:59:23
- npe1: <IXP NPE-C> on ixp0
- npe1: MAC at 0xc800a000
- npe1: MII at 0xc8009000
- npe1: load fw image IXP425.NPE-C Func 0x5 Rev 2.1
- miibus1: <MII bus> on npe1
- ukphy1: <Generic IEEE 802.3u media interface> PHY 5 on miibus1
- ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
- npe1: Ethernet address: 00:d0:12:13:59:23
- cfi0: <Intel/Sharp - 16MB> on ixp0
- cfid0 on cfi0
- ata_avila0: <Gateworks Avila IDE/CF Controller> on ixp0
- ata0: <ATA channel 0> on ata_avila0
- led_avila0: <Gateworks Avila Front Panel LED> on ixp0
- gpio_avila0: <Gateworks Avila GPIO driver> on ixp0
- gpioc0: <GPIO controller> on gpio_avila0
- gpiobus0: <GPIO bus> on gpio_avila0
- Timecounter "IXP4XX Timer" frequency 66666600 Hz quality 1000
- Timecounters tick every 10.000 msec
- ada0 at ata0 bus 0 scbus0 target 0 lun 0
- ada0: <ST640211CF 3.07> CFA-0 device
- ada0: 16.700MB/s transfers (PIO4, PIO 8192bytes)
- ada0: 3906MB (7999488 512 byte sectors: 16H 63S/T 7936C)
- ada0: Previously was known as ad0
- bootpc_init: wired to interface 'npe1'
- Sending DHCP Discover packet from interface npe1 (00:d0:12:13:59:23)
- npe1: link state changed to DOWN
- DHCP/BOOTP timeout for server 255.255.255.255
- DHCP/BOOTP timeout for server 255.255.255.255
- DHCP/BOOTP timeout for server 255.255.255.255
- DHCP/BOOTP timeout for server 255.255.255.255
- DHCP/BOOTP timeout for server 255.255.255.255
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement