NUS Auto Downloader 4.1.9 Custom Guide
Generated on 2010-08-12 - 18:41:01,87
Check for updates at tinyurl.com/nusauto


This Guide was generated using the following parameters:

               * Wii is currently a virgin (un-modified)
               * Current firmware is 4.2E
               * Desired firmware is 4.2E

               * Download Photo Channel
               * Download Internet Channel
               * Download Weather Channel
               * Download News Channel
               * Download Mii Channel
               * Download Shopping Channel (and IOS61)

               * Download Extra Brick Protection



This software is not for sale. If you paid for this software or a "bundle" you have been scammed.

THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY, NEITHER STATED NOR IMPLIED.
NO ONE BUT YOURSELF IS TO BE HELD RESPONSIBLE FOR ANY DAMAGE THIS MAY CAUSE TO YOUR NINTENDO WII CONSOLE!
USE THIS AT YOUR OWN RISK!



IMPORTANT NOTES:

*This guide does NOT require a Wifi connection on your Wii.
*An SD card formatted to FAT(32) required (Best results are with non-SDHC cards, SDHC will only work on 4.0 or above).
*If you get errors during any of the steps reformat your SD card as FAT or FAT32
*Turn off WiiConnect24 and take out all gamecube memory cards/controllers when modding the Wii (unless instructed otherwise).
*If your Wii ever freezes, hold the power button on the Wii for 5 seconds to power it off then try again.
*Don’t ever accept a new Nintendo update without first googling to see if it’s safe. The last update (to 4.3) was released in late June 2010 and is NOT safe to accept. If you accept an official Nintendo update after modding the Wii, you may lose some or all of your modifications.
*Never uninstall a system menu or IOS
*Do not install untested wads/themes without Bootmii or Priiloader installed.
*This custom guide is great start, but Wii modding is always evolving. Check for updates online, and remember, google is your friend.
*If you have questions, a more detailed guide can be found here: http://www.completesoftmodguide.tk




1) INSTALLING THE HOMEBREW CHANNEL (HBC) AND BOOTMII




Run BannerBomb v2 by selecting the SD Card Button on the main system menu screen and choosing yes to load boot.dol/elf
Note: If it doesn't work for you, visit http://bannerbomb.qoid.us/ for more variations of either version of bannerbomb.



This runs the Hackmii Installer (and silently/automatically installs BootMii as IOS). Use the installer to install the Homebrew Channel (HBC) and Bootmii as Boot2 if possible. If you cannot install BootMii as Boot2, you also need to 'prepare an SD Card' for BootMii (as the 'BootMii' folder is required to launch BootMii as IOS or Boot2).

Note: If you get a 'no vulnerable IOS' error message, run NUS Auto Downloader again and this time select the 'Hackmii Solutions' option instead of 'Download Wizard' and follow the new instructions before continuing this guide.

After you exit the hackmii installer, you will be taken to the HBC.
Hit the home button. In the top right corner you will see the IOS used by the HBC.

If the HBC is using an IOS other than IOS61 or your homebrew channel is upside-down, make a note of it as it applies later in the guide (you will have to reinstall the HBC).

If it is using IOS61 and your HBC is not upside-down, you can skip the Reinstall The Homebrew Channel step when you get to it.




2) MAKING A NAND BACKUP

While inside the Homebrew Channel, load BootMii by pressing home and clicking Launch Bootmii.
Press the power button on the wii 3 times to get to the last option, then press the reset button. [You can also navigate with a Gamecube controller]

Press reset to choose the first option, then follow the directions on the screen to make your NAND backup. [Bad blocks are no problem.]

Backup the Bootmii folder, NAND.bin, and keys.bin elsewhere and erase from the sd card (or rename it). You'll need these in case of emergencies, so don't lose them.
Go back to The Homebrew Channel.

Note: if Bootmii was installed as boot2, then it will show up as soon as the Wii is turned on AS LONG AS it finds the bootmii folder (mentioned above) on the root of the SD card.




3) RESTORING THE TRUCHA BUG

Start the Homebrew Channel and use it to load Multi-Mod Manager (MMM).
In MMM, Go down to select "Install & Patch IOS36" and choose express mode.



4) INSTALL WADS

If you exited MMM, reload it via the HBC, then select 'Load another IOS' -press A
Select IOS36 - press A

Note: If this step fails with error -ret 2011 or other, you may need to retry patching IOS36. If the Wii was previously softmodded, you can try using cIOS250 (or others like 202,222,223,224,236,249)

In Multi-Manager Mod's main menu, Go down to select "WAD Manager".

Install the following WADs in the WAD folder (this list of WADs is unique to how you answered the Wizard's questions).

Be careful not to install any additional wads that may have been previously saved in this folder (they may be safe, but I cannot say for sure).

Hold + for 2 seconds to select all wads in the folder. Then Press A twice to install them all.
After the installation finishes read the install report to make sure all the files installed properly.

     You're unique list of wads to install are as follows:

     * IOS11v257(IOS60v6174[FS-ES-NP])
     * IOS20v257(IOS60v6174[FS-ES-NP])
     * IOS30v2817(IOS60v6174[FS-ES-NP])
     * IOS50v5121(IOS50v4889[FS-ES-NP])
     * IOS60v6401(IOS60v6174[FS-ES-NP])
     * IOS70v6913(IOS70v6687[FS-ES-NP])
     * cIOS202[57]-v5
     * cIOS223[37-38]-v4
     * cIOS222[38]-v5
     * cIOS224[57]-v5
     * cIOS249[57]-v19
     * cIOS250[37]-v19
     * cMIOS-MPv0.2-v4
     * Mii Channel (Region Free)
     * Photo 1.1 (USA/PAL/JAP)
     * Shopping (USA/PAL/JAP)
     * Internet (PAL)
     * Weather (PAL)
     * News (PAL)
     * IOS9v1034
     * IOS12v525
     * IOS13v1031
     * IOS14v1031
     * IOS17v1031
     * IOS21v1038
     * IOS22v1293
     * IOS28v1806
     * IOS31v3607
     * IOS33v3607
     * IOS34v3607
     * IOS35v3607
     * IOS53v5662
     * IOS55v5662
     * IOS56v5661
     * IOS58v6175
     * IOS61v5661
     * usbloader(s)-(emulators)-IDCL
       This is a forwarder channel that will load the first file it finds from the following list:
                   FAT:/apps/usbloader_cfg/boot.dol
                   FAT:/apps_emulators/usbloader_cfg/boot.dol
                   FAT:/apps/usbloader/boot.dol
                   FAT:/apps_emulators/usbloader/boot.dol
                   FAT:/apps/usb-loader/boot.dol
                   FAT:/apps_emulators/usb-loader/boot.dol
                   FAT:/apps/usbloader_gx/boot.dol
                   FAT:/apps_emulators/usbloader_gx/boot.dol
       Note: First the SD Card is checked, then your USB Hard Drive (formatted as FAT32).
       You should always have at least one forwarder channel installed on your Wii,
       that way, in the event of accidental update, you will be able to rehack your Wii
       without relying on the Indiana Pwns exploit.

If any failed, make a note of which ones and retry installing them one at time.

Note: Whenever you install a new System Menu, Priiloader is uninstalled. So be sure to reinstall it afterwards (especially if you do not have bootmii as boot2)




5) REINSTALL THE HOMEBREW CHANNEL (if applicable)

Earlier you should have checked what IOS is used by the HBC. If the IOS used by your Homebrew Channel is IOS61 and your HBC is not upside-down, you can skip this step.

If the HBC is using an IOS other than IOS61 or your homebrew channel is upside-down, you should reinstall the HBC.

In MMM's main menu, select 'App Manager' and then select the HackMii_Installer.
Use the Hackmii Installer to fix/re-install the HBC. Once you've successfully reinstalled the HBC, you can move onto the next step of the guide.

If you already exited MMM, you can load the HackMii_Installer from the Homebrew Channel.

If the HBC is failing to load any apps (just blackscreens), instead launch the Hackmii Installer using the method described in the First Step




6) INSTALL PRIILOADER

Run the Priiloader installer from the HBC. On the main menu screen, hold B and press + to install Priiloader using IOS249.
Priiloader may ask for confirmation, say Yes (the installation should go smoothly despite the warning).

Priiloader may give the following two 'yellow' errors. These are expected and are not an issue.
      loader.ini couldn't delete error -106
      password.txt couldn't delete error -106

Note: If you get repeated errors, first launch MMM via the HBC, then select 'Load another IOS' and Select IOS36 (or any IOS you know is patched). Then use MMM's app launcher to start the Priiloader installer and just press + to install using the loaded IOS.

After successfully installing Priiloader, access it by powering off the wii,
then powering it back and holding reset while it's booting until you see the Priiloader menu.

You should install some system menu hacks now (by going to System Menu hacks option).

RECOMMENDED HACKS: Block Disc Updates, Block Online Updates, Replace Health Screen, Auto-Press A at Health Screen, Disable Deletion of some important channels, Region-Free Everything, remove no copy save file protection, and Move Disc Channel.

The priiloader menu is white by default, you can change it to black in the Priiloader settings if you prefer.

One of the special functions of Priiloader is that it can autoboot any app/file instead of the system menu. Some apps (like crazyIntro) can't be used without it.
For details on how to do so, visit http://www.completesoftmodguide.tk/system-hacks/priiloader




7) AFTER MODDING

Now at this point your practically done.
Now you should be downloading the latest homebrew applications and setting them up on
your SD Card (or FAT32 USB Hard Drive) so they can be launched via the HBC.

For playing your backups off a USB hard drive, run the USB-Loader Setup feature from NUS Auto Downloader's Main Menu

For downloading applications, you should:
* Download Homebrew Browser to get many popular apps, but this is an online only application (http://www.completesoftmodguide.tk/how-to-use/hbb)
* For those without internet, check out this list of Homebrew applications (wiibrew.org/wiki/List_of_all_homebrew).
Another great resource is webrewwii.blogspot.com

After getting whatever apps you want, you should get a boot.dol file and possibly a icon.png and meta.xml.
For HBC to read your SD/USB correctly, your card must be structured SD:/apps/application name/boot.dol
If you have a *.dol not named boot.dol, rename it boot.dol, otherwise it will not be recognized by the HBC.
(optional: the icon.png and meta.xml should be saved in the same place as the boot.dol)



8) SUPPORT XFLAK

IF NUS AUTO DOWNLOADER WORKED FOR YOU, PLEASE VOTE IN FAVOUR OF THE PROGRAM HERE (tinyurl.com/NusAuto)

DONATIONS CAN OPTIONALLY BE MADE VIA PAYPAL TO XFLAK40@HOTMAIL.COM

CHECK OUT MY TOP CHANNELS HERE (tinyurl.com/topchannels)

CHECK OUT MY CRAZY INTRO VIDEOS HERE (tinyurl.com/crazyintro)