API tools faq
paste
Guest User

NanoPi M3 internal aerial

a guest
Dec 7th, 2016
530
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 54.20 KB | None | 0 0
raw download clone embed print report
  1. root@NanoPi3:/home/tk# iwconfig wlan0
  2. wlan0 IEEE 802.11bgn ESSID:"Snort-Honeynet"
  3. Mode:Managed Frequency:2.472 GHz Access Point: BC:05:43:BE:C1:E7
  4. Bit Rate=2 Mb/s Tx-Power=31 dBm
  5. Retry short limit:7 RTS thr:off Fragment thr:off
  6. Encryption key:off
  7. Power Management:on
  8. Link Quality=30/70 Signal level=-80 dBm
  9. Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
  10. Tx excessive retries:73 Invalid misc:1 Missed beacon:0
  11.  
  12. root@NanoPi3:/home/tk# ping -c 10 192.168.83.146
  13. PING 192.168.83.146 (192.168.83.146) 56(84) bytes of data.
  14. 64 bytes from 192.168.83.146: icmp_seq=1 ttl=64 time=11.6 ms
  15. 64 bytes from 192.168.83.146: icmp_seq=2 ttl=64 time=4.15 ms
  16. 64 bytes from 192.168.83.146: icmp_seq=3 ttl=64 time=4.11 ms
  17. 64 bytes from 192.168.83.146: icmp_seq=4 ttl=64 time=26.0 ms
  18. 64 bytes from 192.168.83.146: icmp_seq=5 ttl=64 time=3.80 ms
  19. 64 bytes from 192.168.83.146: icmp_seq=6 ttl=64 time=6.42 ms
  20. 64 bytes from 192.168.83.146: icmp_seq=7 ttl=64 time=4.36 ms
  21. 64 bytes from 192.168.83.146: icmp_seq=8 ttl=64 time=4.28 ms
  22. 64 bytes from 192.168.83.146: icmp_seq=9 ttl=64 time=5.34 ms
  23. 64 bytes from 192.168.83.146: icmp_seq=10 ttl=64 time=8.25 ms
  24.  
  25. --- 192.168.83.146 ping statistics ---
  26. 10 packets transmitted, 10 received, 0% packet loss, time 9052ms
  27. rtt min/avg/max/mdev = 3.806/7.852/26.087/6.516 ms
  28.  
  29. root@NanoPi3:/home/tk# iperf3 -c 192.168.83.146
  30. Connecting to host 192.168.83.146, port 5201
  31. [ 4] local 192.168.83.166 port 39160 connected to 192.168.83.146 port 5201
  32. [ ID] Interval Transfer Bandwidth Retr Cwnd
  33. [ 4] 0.00-1.00 sec 14.1 KBytes 115 Kbits/sec 6 1.41 KBytes
  34. [ 4] 1.00-2.01 sec 0.00 Bytes 0.00 bits/sec 1 1.41 KBytes
  35. [ 4] 2.01-3.01 sec 14.1 KBytes 116 Kbits/sec 1 2.83 KBytes
  36. [ 4] 3.01-4.00 sec 0.00 Bytes 0.00 bits/sec 0 2.83 KBytes
  37. [ 4] 4.00-5.01 sec 14.1 KBytes 115 Kbits/sec 4 4.24 KBytes
  38. [ 4] 5.01-6.01 sec 0.00 Bytes 0.00 bits/sec 4 4.24 KBytes
  39. [ 4] 6.01-7.01 sec 17.0 KBytes 139 Kbits/sec 3 2.83 KBytes
  40. [ 4] 7.01-8.00 sec 18.4 KBytes 151 Kbits/sec 3 4.24 KBytes
  41. [ 4] 8.00-9.01 sec 19.8 KBytes 162 Kbits/sec 2 4.24 KBytes
  42. [ 4] 9.01-10.01 sec 24.0 KBytes 197 Kbits/sec 3 2.83 KBytes
  43. - - - - - - - - - - - - - - - - - - - - - - - - -
  44. [ ID] Interval Transfer Bandwidth Retr
  45. [ 4] 0.00-10.01 sec 122 KBytes 99.6 Kbits/sec 27 sender
  46. [ 4] 0.00-10.01 sec 107 KBytes 88.0 Kbits/sec receiver
  47.  
  48. iperf Done.
  49.  
  50. root@NanoPi3:/home/tk# iperf3 -R -c 192.168.83.146
  51. Connecting to host 192.168.83.146, port 5201
  52. Reverse mode, remote host 192.168.83.146 is sending
  53. [ 4] local 192.168.83.166 port 39162 connected to 192.168.83.146 port 5201
  54. [ ID] Interval Transfer Bandwidth
  55. [ 4] 0.00-1.00 sec 115 KBytes 935 Kbits/sec
  56. [ 4] 1.00-2.00 sec 60.8 KBytes 497 Kbits/sec
  57. [ 4] 2.00-3.00 sec 116 KBytes 953 Kbits/sec
  58. [ 4] 3.00-4.01 sec 103 KBytes 839 Kbits/sec
  59. [ 4] 4.01-5.00 sec 86.3 KBytes 709 Kbits/sec
  60. [ 4] 5.00-6.01 sec 93.3 KBytes 762 Kbits/sec
  61. [ 4] 6.01-7.00 sec 83.4 KBytes 686 Kbits/sec
  62. [ 4] 7.00-8.01 sec 35.4 KBytes 288 Kbits/sec
  63. [ 4] 8.01-9.01 sec 65.0 KBytes 533 Kbits/sec
  64. [ 4] 9.01-10.01 sec 89.1 KBytes 732 Kbits/sec
  65. - - - - - - - - - - - - - - - - - - - - - - - - -
  66. [ ID] Interval Transfer Bandwidth Retr
  67. [ 4] 0.00-10.01 sec 2.13 MBytes 1.78 Mbits/sec 1 sender
  68. [ 4] 0.00-10.01 sec 1.08 MBytes 903 Kbits/sec receiver
  69.  
  70. iperf Done.
  71.  
  72. root@NanoPi3:/home/tk# iwconfig wlan0 power off
  73.  
  74. root@NanoPi3:/home/tk# iperf3 -c 192.168.83.146
  75. Connecting to host 192.168.83.146, port 5201
  76. [ 4] local 192.168.83.166 port 39164 connected to 192.168.83.146 port 5201
  77. [ ID] Interval Transfer Bandwidth Retr Cwnd
  78. [ 4] 0.00-1.01 sec 45.2 KBytes 368 Kbits/sec 3 11.3 KBytes
  79. [ 4] 1.01-2.00 sec 28.3 KBytes 233 Kbits/sec 2 8.48 KBytes
  80. [ 4] 2.00-3.00 sec 14.1 KBytes 116 Kbits/sec 2 7.07 KBytes
  81. [ 4] 3.00-4.01 sec 26.9 KBytes 219 Kbits/sec 3 7.07 KBytes
  82. [ 4] 4.01-5.01 sec 11.3 KBytes 92.7 Kbits/sec 0 7.07 KBytes
  83. [ 4] 5.01-6.00 sec 11.3 KBytes 93.1 Kbits/sec 1 5.66 KBytes
  84. [ 4] 6.00-7.01 sec 33.9 KBytes 277 Kbits/sec 4 4.24 KBytes
  85. [ 4] 7.01-8.00 sec 0.00 Bytes 0.00 bits/sec 1 4.24 KBytes
  86. [ 4] 8.00-9.00 sec 0.00 Bytes 0.00 bits/sec 1 4.24 KBytes
  87. [ 4] 9.00-10.00 sec 0.00 Bytes 0.00 bits/sec 0 4.24 KBytes
  88. - - - - - - - - - - - - - - - - - - - - - - - - -
  89. [ ID] Interval Transfer Bandwidth Retr
  90. [ 4] 0.00-10.00 sec 171 KBytes 140 Kbits/sec 17 sender
  91. [ 4] 0.00-10.00 sec 143 KBytes 117 Kbits/sec receiver
  92.  
  93. iperf Done.
  94.  
  95. root@NanoPi3:/home/tk# iperf3 -R -c 192.168.83.146
  96. Connecting to host 192.168.83.146, port 5201
  97. Reverse mode, remote host 192.168.83.146 is sending
  98. [ 4] local 192.168.83.166 port 39166 connected to 192.168.83.146 port 5201
  99. [ ID] Interval Transfer Bandwidth
  100. [ 4] 0.00-1.01 sec 147 KBytes 1.20 Mbits/sec
  101. [ 4] 1.01-2.01 sec 122 KBytes 996 Kbits/sec
  102. [ 4] 2.01-3.01 sec 91.9 KBytes 752 Kbits/sec
  103. [ 4] 3.01-4.00 sec 87.7 KBytes 723 Kbits/sec
  104. [ 4] 4.00-5.00 sec 87.7 KBytes 716 Kbits/sec
  105. [ 4] 5.00-6.01 sec 97.6 KBytes 796 Kbits/sec
  106. [ 4] 6.01-7.01 sec 97.6 KBytes 799 Kbits/sec
  107. [ 4] 7.01-8.00 sec 86.3 KBytes 709 Kbits/sec
  108. [ 4] 8.00-9.01 sec 117 KBytes 958 Kbits/sec
  109. [ 4] 9.01-10.00 sec 94.7 KBytes 781 Kbits/sec
  110. - - - - - - - - - - - - - - - - - - - - - - - - -
  111. [ ID] Interval Transfer Bandwidth Retr
  112. [ 4] 0.00-10.00 sec 2.44 MBytes 2.05 Mbits/sec 1 sender
  113. [ 4] 0.00-10.00 sec 1.38 MBytes 1.16 Mbits/sec receiver
  114.  
  115. iperf Done.
  116.  
  117. root@NanoPi3:/home/tk# nmcli dev wifi list
  118. * SSID MODUS CHAN RATE SIGNAL BARS SICHERHEIT
  119. DISTORTEDPEOPLE Infra 9 54 Mbit/s 42 ▂▄__ WPA1 WPA2
  120. EasyBox-116D28 Infra 9 54 Mbit/s 30 ▂___ WPA1 WPA2
  121. * Snort-Honeynet Infra 13 54 Mbit/s 38 ▂▄__ WPA2
  122. UBNT2 Infra 3 54 Mbit/s 19 ▂___ --
  123.  
  124.  
  125.  
  126.  
  127.  
  128.  
  129.  
  130.  
  131.  
  132. root@NanoPi3:/home/tk# dmesg
  133. [ 0.000000] Booting Linux on physical CPU 0
  134. [ 0.000000] Initializing cgroup subsys cpuset
  135. [ 0.000000] Initializing cgroup subsys cpu
  136. [ 0.000000] Linux version 3.4.39-s5p6818 (root@jensen) (gcc version 4.9.3 (ctng-1.21.0-229g-FA) ) #4 SMP PREEMPT Wed Nov 16 16:33:05 HKT 2016
  137. [ 0.000000] CPU: ARMv7 Processor [410fd033] revision 3 (ARMv7), cr=10c5387d
  138. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  139. [ 0.000000] Machine: NANOPI3
  140. [ 0.000000] Ignoring unrecognised tag 0x00000000
  141. [ 0.000000] Display: HDMI selected
  142. [ 0.000000] nxp_reserve_mem: reserve CMA: size 159100928
  143. [ 0.000000] NXP/CMA: Reserved 0x65e45000/0x097bb000 for 'ion'
  144. [ 0.000000] NXP/CMA: success register cma region for 'ion'
  145. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  146. [ 0.000000] CPU : iomap[ 0]: p 0xc0000000 -> v 0xf0000000 len=0x300000
  147. [ 0.000000] CPU : iomap[ 1]: p 0xe0000000 -> v 0xf0300000 len=0x100000
  148. [ 0.000000] CPU : iomap[ 2]: p 0xfff00000 -> v 0xf0400000 len=0x100000
  149. [ 0.000000] CPU : iomap[ 3]: p 0x2c000000 -> v 0xf0500000 len=0x100000
  150. [ 0.000000] CPU : iomap[ 4]: p 0x00000000 -> v 0xf0600000 len=0x100000
  151. [ 0.000000] CPU : DMA Zone Size =16M, CORE 8
  152. [ 0.000000] s5p6818-NanoPi3: Board initialized
  153. [ 0.000000] CPU : Clock Generator= 58 EA, DVFS = support, PLL.1
  154. [ 0.000000] PLL : [0] = 800000000, [1] = 800000000, [2] = 614394000, [3] = 800000000
  155. [ 0.000000] (0) PLL1: CPU FCLK = 800000000, HCLK = 200000000 (G0)
  156. [ 0.000000] (7) PLL1: CPU FCLK = 800000000, HCLK = 200000000 (G1)
  157. [ 0.000000] (2) PLL3: MEM FCLK = 800000000, DCLK = 800000000, BCLK = 400000000, PCLK = 200000000
  158. [ 0.000000] (1) PLL0: BUS BCLK = 400000000, PCLK = 200000000
  159. [ 0.000000] (8) PLL0: CCI4 BCLK = 400000000, PCLK = 200000000
  160. [ 0.000000] (3) PLL0: G3D BCLK = 400000000
  161. [ 0.000000] (4) PLL0: CODA BCLK = 400000000, PCLK = 200000000
  162. [ 0.000000] (5) PLL0: DISP BCLK = 400000000, PCLK = 200000000
  163. [ 0.000000] (6) PLL0: HDMI PCLK = 100000000
  164. [ 0.000000] On node 0 totalpages: 262144
  165. [ 0.000000] free_area_init_node: node 0, pgdat c0888680, node_mem_map c097d000
  166. [ 0.000000] DMA zone: 1516 pages used for memmap
  167. [ 0.000000] DMA zone: 0 pages reserved
  168. [ 0.000000] DMA zone: 192532 pages, LIFO batch:31
  169. [ 0.000000] HighMem zone: 532 pages used for memmap
  170. [ 0.000000] HighMem zone: 67564 pages, LIFO batch:15
  171. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c118a000 s12608 r8192 d16064 u36864
  172. [ 0.000000] pcpu-alloc: s12608 r8192 d16064 u36864 alloc=9*4096
  173. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  174. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
  175. [ 0.000000] Kernel command line: console=ttySAC0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait init=/sbin/init systemd.show_status=false g_ether.host_addr=82:cf:ce:fa:68:18 initrd=0x49000000,0x400000 console=tty1 lcd=HDMI720P60
  176. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  177. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  178. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  179. [ 0.000000] allocated 2097152 bytes of page_cgroup
  180. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  181. [ 0.000000] Memory: 1024MB = 1024MB total
  182. [ 0.000000] Memory: 868004k/868004k available, 180572k reserved, 272384K highmem
  183. [ 0.000000] Virtual kernel memory layout:
  184. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  185. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  186. [ 0.000000] vmalloc : 0xef800000 - 0xfee00000 ( 246 MB)
  187. [ 0.000000] lowmem : 0xc0000000 - 0xef600000 ( 758 MB)
  188. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  189. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  190. [ 0.000000] .text : 0xc0008000 - 0xc07dccf8 (8020 kB)
  191. [ 0.000000] .init : 0xc07dd000 - 0xc0814140 ( 221 kB)
  192. [ 0.000000] .data : 0xc0816000 - 0xc0897db8 ( 520 kB)
  193. [ 0.000000] .bss : 0xc0897ddc - 0xc097c088 ( 913 kB)
  194. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  195. [ 0.000000] Preemptible hierarchical RCU implementation.
  196. [ 0.000000] NR_IRQS:272
  197. [ 0.000000] GIC @f0009000: start 0 (gic 31)
  198. [ 0.000000] GPIO @f001a000: start 106, mask 0xffffffff (gpio 85)
  199. [ 0.000000] GPIO @f001b000: start 138, mask 0xffffffff (gpio 86)
  200. [ 0.000000] GPIO @f001c000: start 170, mask 0xffffffff (gpio 87)
  201. [ 0.000000] GPIO @f001d000: start 202, mask 0xffffffff (gpio 88)
  202. [ 0.000000] GPIO @f001e000: start 234, mask 0xffffffff (gpio 89)
  203. [ 0.000000] ALIVE @f0010800: start 266, mask 0x000000ff (alive 36, num 6)
  204. [ 0.000000] timer.0: source, 10000000(HZ:250), mult:3355443200
  205. [ 0.000000] timer.1: event , 10000000(HZ:250), mult:42949673
  206. [ 0.000000] sched_clock: 32 bits at 250 Hz, resolution 4000000ns, wraps every 4294967292ms
  207. [ 0.000000] Console: colour dummy device 80x30
  208. [ 0.000000] console [tty1] enabled
  209. [ 0.000000] Calibrating delay loop... 1594.36 BogoMIPS (lpj=3188736)
  210. [ 0.048000] pid_max: default: 32768 minimum: 301
  211. [ 0.048000] Security Framework initialized
  212. [ 0.048000] SELinux: Initializing.
  213. [ 0.048000] SELinux: Starting in permissive mode
  214. [ 0.048000] Mount-cache hash table entries: 512
  215. [ 0.048000] Initializing cgroup subsys cpuacct
  216. [ 0.048000] Initializing cgroup subsys memory
  217. [ 0.048000] Initializing cgroup subsys devices
  218. [ 0.048000] Initializing cgroup subsys freezer
  219. [ 0.048000] CPU: Testing write buffer coherency: ok
  220. [ 0.048000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  221. [ 0.048000] hw perfevents: no hardware support available
  222. [ 0.048000] Setting up static identity map for 0x405d64c8 - 0x405d6520
  223. [ 0.096000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  224. [ 0.136000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  225. [ 0.176000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  226. [ 0.216000] CPU4: thread -1, cpu 0, socket 4, mpidr 80040400
  227. [ 0.256000] CPU5: thread -1, cpu 1, socket 4, mpidr 80040401
  228. [ 0.296000] CPU6: thread -1, cpu 2, socket 4, mpidr 80040402
  229. [ 0.336000] CPU7: thread -1, cpu 3, socket 4, mpidr 80040403
  230. [ 0.336000] Brought up 8 CPUs
  231. [ 0.336000] SMP: Total of 8 processors activated (12754.94 BogoMIPS).
  232. [ 0.336000] devtmpfs: initialized
  233. [ 0.344000] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 3
  234. [ 0.344000] pwm: max = 50000000 hz
  235. [ 0.348000] prepare_gpio_suspend:
  236. [ 0.348000] alfn[0][0]: 0x00000000, alfn[0][1]: 0x00000000
  237. [ 0.348000] alfn[1][0]: 0x66800000, alfn[1][1]: 0x55555566
  238. [ 0.348000] alfn[2][0]: 0x55555555, alfn[2][1]: 0x00555555
  239. [ 0.348000] alfn[3][0]: 0x00000000, alfn[3][1]: 0x00000000
  240. [ 0.348000] alfn[4][0]: 0x00000000, alfn[4][1]: 0x55540000
  241. [ 0.348000] dummy:
  242. [ 0.348000] NET: Registered protocol family 16
  243. [ 0.348000] [Register machine platform devices]
  244. [ 0.348000] mach: add amba device pl08xdmac.0
  245. [ 0.348000] mach: add amba device pl08xdmac.1
  246. [ 0.348000] mach: add device uart0
  247. [ 0.348000] mach: add device uart1
  248. [ 0.348000] mach: add device uart3
  249. [ 0.352000] mach: add device uart4
  250. [ 0.352000] mach: add device syncgen [2]
  251. [ 0.352000] mach: add device hdmi
  252. [ 0.352000] mach: add device i2c bus (array:3)
  253. [ 0.352000] mach: add device Real Time Clock
  254. [ 0.352000] mach: add device generic pwm (array:4)
  255. [ 0.352000] mach: add device generic gpio (array:6)
  256. [ 0.352000] mach: add device i2s (array:1)
  257. [ 0.352000] mach: add device spdif tx
  258. [ 0.352000] mach: add device usb_ehci
  259. [ 0.352000] mach: add device usb_ohci
  260. [ 0.352000] mach: add device usb otg
  261. [ 0.352000] mach: add device ion-nxp
  262. [ 0.352000] mach: add graphic device opengl|es
  263. [ 0.352000] mach: add device spi0
  264. [ 0.352000] [Register board platform devices]
  265. [ 0.352000] plat: board revision 7
  266. [ 0.352000] plat: add dynamic frequency (pll.1)
  267. [ 0.352000] plat: add device TMU
  268. [ 0.352000] plat: add framebuffer
  269. [ 0.352000] plat: boot from mmc.0
  270. [ 0.352000] plat: add device sdmmc [0]
  271. [ 0.356000] plat: add device sdmmc [1]
  272. [ 0.356000] plat: add backlight pwm device
  273. [ 0.356000] plat: add device keypad
  274. [ 0.356000] plat: add device spdif playback
  275. [ 0.356000] plat: add device asoc-es8316
  276. [ 0.356000] plat: add device nxp-v4l2
  277. [ 0.360000] plat: register spidev
  278. [ 0.360000] plat: add touch(ft5x0x) device
  279. [ 0.360000] plat: add touch(it7260) device
  280. [ 0.360000] plat: add onewire ts device
  281. [ 0.360000] plat: add adxl34x device
  282. [ 0.360000] plat: add bmp085 device
  283. [ 0.360000] plat: add ds1307 device
  284. [ 0.360000] plat: add pcf8591 device
  285. [ 0.360000] plat: add device nxp-gmac
  286. [ 0.360000] plat: add device gpio_led
  287. [ 0.360000] plat: add device pwm_led
  288. [ 0.360000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  289. [ 0.360000] hw-breakpoint: maximum watchpoint size is 8 bytes.
  290. [ 0.380000] bio: create slab <bio-0> at 0
  291. [ 0.384000] gpiochip_add: registered GPIOs 0 to 31 on device: GPIOA
  292. [ 0.384000] gpiochip_add: registered GPIOs 32 to 63 on device: GPIOB
  293. [ 0.384000] gpiochip_add: registered GPIOs 64 to 95 on device: GPIOC
  294. [ 0.384000] gpiochip_add: registered GPIOs 96 to 127 on device: GPIOD
  295. [ 0.384000] gpiochip_add: registered GPIOs 128 to 159 on device: GPIOE
  296. [ 0.384000] gpiochip_add: registered GPIOs 160 to 165 on device: GPIOALV
  297. [ 0.384000] pl08xdmac pl08xdmac.0: Unbalanced pm_runtime_enable!
  298. [ 0.384000] pl08xdmac pl08xdmac.0: initialized 8 virtual memcpy channels
  299. [ 0.384000] pl08xdmac pl08xdmac.0: initialized 16 virtual slave channels
  300. [ 0.384000] pl08xdmac pl08xdmac.0: DMA: PL080 rev1 at 0xc0000000 irq 33
  301. [ 0.384000] pl08xdmac pl08xdmac.1: Unbalanced pm_runtime_enable!
  302. [ 0.384000] pl08xdmac pl08xdmac.1: initialized 8 virtual memcpy channels
  303. [ 0.384000] pl08xdmac pl08xdmac.1: initialized 15 virtual slave channels
  304. [ 0.388000] pl08xdmac pl08xdmac.1: DMA: PL080 rev1 at 0xc0001000 irq 34
  305. [ 0.388000] nxp_ion_probe success!!!
  306. [ 0.388000] SCSI subsystem initialized
  307. [ 0.388000] usbcore: registered new interface driver usbfs
  308. [ 0.388000] usbcore: registered new interface driver hub
  309. [ 0.388000] usbcore: registered new device driver usb
  310. [ 0.388000] i2c-gpio i2c-gpio.3: using pins 159 (SDA) and 158 (SCL)
  311. [ 0.392000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
  312. [ 0.392000] s3c-i2c s3c2440-i2c.0: slave address 0x10
  313. [ 0.392000] s3c-i2c s3c2440-i2c.0: bus frequency set to 390 KHz
  314. [ 0.392000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
  315. [ 0.392000] s3c-i2c s3c2440-i2c.1: slave address 0x10
  316. [ 0.392000] s3c-i2c s3c2440-i2c.1: bus frequency set to 97 KHz
  317. [ 0.392000] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
  318. [ 0.392000] s3c-i2c s3c2440-i2c.2: slave address 0x10
  319. [ 0.392000] s3c-i2c s3c2440-i2c.2: bus frequency set to 195 KHz
  320. [ 0.392000] Linux media interface: v0.10
  321. [ 0.392000] Linux video capture interface: v2.00
  322. [ 0.392000] pps_core: LinuxPPS API ver. 1 registered
  323. [ 0.392000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  324. [ 0.392000] PTP clock support registered
  325. [ 0.400000] axp_mfd 3-0034: AXP (CHIP ID: 0x06) detected
  326. [ 0.404000] axp22_ldo1: 3000 mV
  327. [ 0.408000] axp22_aldo1: 700 <--> 3300 mV at 3300 mV
  328. [ 0.412000] axp22_aldo2: 700 <--> 3300 mV at 1800 mV
  329. [ 0.416000] axp22_aldo3: 700 <--> 3300 mV at 1000 mV
  330. [ 0.420000] axp22_dldo1: 700 <--> 3300 mV at 3300 mV
  331. [ 0.424000] axp22_dldo2: No configuration
  332. [ 0.424000] axp22_dldo2: 700 <--> 3300 mV at 700 mV
  333. [ 0.424000] axp22_dldo3: No configuration
  334. [ 0.428000] axp22_dldo3: 700 <--> 3300 mV at 700 mV
  335. [ 0.428000] axp22_dldo4: No configuration
  336. [ 0.428000] axp22_dldo4: 700 <--> 3300 mV at 700 mV
  337. [ 0.432000] axp22_eldo1: 700 <--> 3300 mV at 1800 mV
  338. [ 0.436000] axp22_eldo2: 700 <--> 3300 mV at 3300 mV
  339. [ 0.440000] axp22_eldo3: No configuration
  340. [ 0.440000] axp22_eldo3: 700 <--> 3300 mV at 700 mV
  341. [ 0.440000] axp22_dc5ldo: No configuration
  342. [ 0.444000] axp22_dc5ldo: 700 <--> 1400 mV at 1200 mV
  343. [ 0.448000] axp22_dcdc1: 1600 <--> 3400 mV at 3300 mV
  344. [ 0.452000] axp22_dcdc2: 600 <--> 1540 mV at 1200 mV
  345. [ 0.456000] axp22_dcdc3: 600 <--> 1860 mV at 1200 mV
  346. [ 0.460000] axp22_dcdc4: 600 <--> 1540 mV at 1500 mV
  347. [ 0.464000] axp22_dcdc5: 1000 <--> 2550 mV at 1500 mV
  348. [ 0.468000] axp22_ldoio0: 700 <--> 3300 mV at 3800 mV
  349. [ 0.468000] axp22_ldoio1: 700 <--> 3300 mV at 3800 mV
  350. [ 0.472000] Advanced Linux Sound Architecture Driver Version 1.0.25.
  351. [ 0.472000] Switching to clocksource source timer
  352. [ 0.476000] Clockevents: could not switch to one-shot mode:
  353. [ 0.476000] Clockevents: could not switch to one-shot mode:
  354. [ 0.476000] Clockevents: could not switch to one-shot mode: dummy_timer is not functional.
  355. [ 0.476000] Clockevents: could not switch to one-shot mode:
  356. [ 0.476000] Clockevents: could not switch to one-shot mode: dummy_timer is not functional.
  357. [ 0.476000] Could not switch to high resolution mode on CPU 3
  358. [ 0.476000] dummy_timer is not functional.
  359. [ 0.476000] dummy_timer is not functional.
  360. [ 0.476000] Could not switch to high resolution mode on CPU 2
  361. [ 0.476000] Could not switch to high resolution mode on CPU 0
  362. [ 0.476000] Could not switch to high resolution mode on CPU 1
  363. [ 0.476000] Clockevents: could not switch to one-shot mode: dummy_timer is not functional.
  364. [ 0.476000] Clockevents: could not switch to one-shot mode:
  365. [ 0.476000] Clockevents: could not switch to one-shot mode: dummy_timer is not functional.
  366. [ 0.476000] dummy_timer is not functional.
  367. [ 0.476000] Could not switch to high resolution mode on CPU 7
  368. [ 0.476000] Could not switch to high resolution mode on CPU 6
  369. [ 0.476000] Could not switch to high resolution mode on CPU 5
  370. [ 0.476000] dummy_timer is not functional.
  371. [ 0.476000] Could not switch to high resolution mode on CPU 4
  372. [ 0.496000] NET: Registered protocol family 2
  373. [ 0.496000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  374. [ 0.496000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  375. [ 0.500000] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
  376. [ 0.500000] TCP: Hash tables configured (established 131072 bind 65536)
  377. [ 0.500000] TCP: reno registered
  378. [ 0.500000] UDP hash table entries: 512 (order: 3, 32768 bytes)
  379. [ 0.500000] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
  380. [ 0.504000] NET: Registered protocol family 1
  381. [ 0.504000] RPC: Registered named UNIX socket transport module.
  382. [ 0.504000] RPC: Registered udp transport module.
  383. [ 0.504000] RPC: Registered tcp transport module.
  384. [ 0.504000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  385. [ 0.504000] Unpacking initramfs...
  386. [ 0.668000] Initramfs unpacking failed: junk in compressed archive
  387. [ 0.672000] Freeing initrd memory: 4096K
  388. [ 0.672000] Disply Reset Status : On
  389. [ 0.672000] nxp_edid_init
  390. [ 0.680000] _edid_i2c_probe
  391. [ 0.680000] nxp_edid_init: success!!!
  392. [ 0.680000] nxp_hdmiphy_init
  393. [ 0.680000] nxp_hdmiphy_s_dv_preset: preset(8)
  394. [ 0.680000] Display HDMI register operation
  395. [ 0.680000] Display.0 fps=161 (6 ms), wait= 4 jiffies, Pixelclk=200000000hz
  396. [ 0.680000] bt_bcm: rfkill initialized
  397. [ 0.680000] audit: initializing netlink socket (disabled)
  398. [ 0.680000] type=2000 audit(0.676:1): initialized
  399. [ 0.680000] highmem bounce pool size: 64 pages
  400. [ 0.692000] NFS: Registering the id_resolver key type
  401. [ 0.692000] fuse init (API version 7.18)
  402. [ 0.692000] msgmni has been set to 1171
  403. [ 0.692000] SELinux: Registering netfilter hooks
  404. [ 0.692000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  405. [ 0.692000] io scheduler noop registered
  406. [ 0.692000] io scheduler deadline registered
  407. [ 0.692000] io scheduler cfq registered (default)
  408. [ 0.696000] display.0 connected to fb.0 ...
  409. [ 0.696000] nxp-fb.0: dma addr = 0x65e45000, buf[0xe5278f40]
  410. [ 0.696000] nxp-fb.0: dma addr = 0x661c9000, buf[0xe5279100]
  411. [ 0.740000] hdmi_stop entered
  412. [ 0.740000] nxp-fb 0: out[0], 1280 * 720 - 32 bpp (phys:65e45000 virt:0xef831000 max:7372800)
  413. [ 0.756000] Console: switching to colour frame buffer device 160x45
  414. [ 0.776000] nxp-uart.0: ttySAC0 at MMIO 0xc00a1000 (irq = 39) is a S3C6400/10
  415. [ 0.804000] console [ttySAC0] enabled
  416. [ 0.808000] nxp-uart.1: ttySAC1 at MMIO 0xc00a0000 (irq = 38) is a S3C6400/10
  417. [ 0.816000] nxp-uart.3: ttySAC3 at MMIO 0xc00a3000 (irq = 41) is a S3C6400/10
  418. [ 0.820000] nxp-uart.4: ttySAC4 at MMIO 0xc006d000 (irq = 42) is a S3C6400/10
  419. [ 0.832000] loop: module loaded
  420. [ 0.832000] tun: Universal TUN/TAP device driver, 1.6
  421. [ 0.836000] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  422. [ 0.844000] -- nxpmac initialize --
  423. [ 0.848000] stmmac - user ID: 0x37, Synopsys ID: 0x37
  424. [ 0.852000] Ring mode enabled
  425. [ 0.856000] DMA HW capability register supported
  426. [ 0.860000] Enhanced/Alternate descriptors
  427. [ 0.864000] Enabled extended descriptors
  428. [ 0.868000] RX Checksum Offload Engine supported (type 2)
  429. [ 0.872000] TX Checksum insertion supported
  430. [ 0.876000] Wake-Up On Lan supported
  431. [ 0.880000] Enable RX Mitigation via HW Watchdog Timer
  432. [ 0.932000] stmmac: probed
  433. [ 0.936000] eth0: PHY ID 001cc915 at 0 IRQ 257 (stmmac-0:00)
  434. [ 0.940000] eth0: PHY ID 001cc915 at 7 IRQ 257 (stmmac-0:07) active
  435. [ 0.948000] PPP generic driver version 2.4.2
  436. [ 0.952000] PPP BSD Compression module registered
  437. [ 0.956000] PPP Deflate Compression module registered
  438. [ 0.968000] PPP MPPE Compression module registered
  439. [ 0.976000] NET: Registered protocol family 24
  440. [ 0.980000] usbcore: registered new interface driver asix
  441. [ 0.984000] usbcore: registered new interface driver cdc_ether
  442. [ 0.988000] usbcore: registered new interface driver net1080
  443. [ 0.996000] usbcore: registered new interface driver cdc_subset
  444. [ 1.000000] usbcore: registered new interface driver zaurus
  445. [ 1.004000] usbcore: registered new interface driver cdc_ncm
  446. [ 1.008000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  447. [ 1.016000] nxp-ehci nxp-ehci: SLsi Synopsys EHCI Host Controller
  448. [ 1.020000] nxp-ehci nxp-ehci: new USB bus registered, assigned bus number 1
  449. [ 1.028000] nxp-ehci nxp-ehci: irq 82, io mem 0xc0030000
  450. [ 1.044000] nxp-ehci nxp-ehci: USB 0.0 started, EHCI 1.00
  451. [ 1.048000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  452. [ 1.052000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  453. [ 1.060000] usb usb1: Product: SLsi Synopsys EHCI Host Controller
  454. [ 1.068000] usb usb1: Manufacturer: Linux 3.4.39-s5p6818 ehci_hcd
  455. [ 1.072000] usb usb1: SerialNumber: nxp-ehci
  456. [ 1.076000] hub 1-0:1.0: USB hub found
  457. [ 1.080000] hub 1-0:1.0: 3 ports detected
  458. [ 1.084000] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  459. [ 1.292000] Core Release: 2.93a
  460. [ 1.296000] Setting default values for core params
  461. [ 1.300000] Finished setting default values for core params
  462. [ 1.396000] usb 1-1: new high-speed USB device number 2 using nxp-ehci
  463. [ 1.504000] Using Descriptor DMA mode
  464. [ 1.508000] Dedicated Tx FIFOs mode
  465. [ 1.512000] dwc_otg: Microframe scheduler enabled
  466. [ 1.512000] dwc_otg dwc_otg: DWC OTG Controller
  467. [ 1.516000] dwc_otg dwc_otg: new USB bus registered, assigned bus number 2
  468. [ 1.520000] dwc_otg dwc_otg: irq 81, io mem 0x00000000
  469. [ 1.528000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  470. [ 1.532000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  471. [ 1.532000] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
  472. [ 1.532000] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  473. [ 1.532000] usb 1-1: Product: USB2.0 Hub
  474. [ 1.532000] hub 1-1:1.0: USB hub found
  475. [ 1.532000] hub 1-1:1.0: 4 ports detected
  476. [ 1.548000] usb usb2: Product: DWC OTG Controller
  477. [ 1.552000] usb usb2: Manufacturer: Linux 3.4.39-s5p6818 dwc_otg_hcd
  478. [ 1.556000] usb usb2: SerialNumber: dwc_otg
  479. [ 1.560000] hub 2-0:1.0: USB hub found
  480. [ 1.564000] hub 2-0:1.0: 1 port detected
  481. [ 1.572000] dwc_otg: FIQ disabled
  482. [ 1.572000] dwc_otg: NAK holdoff enabled
  483. [ 1.572000] dwc_otg: FIQ split fix disabled
  484. [ 1.572000] Module dwc_common_port init
  485. [ 1.572000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  486. [ 1.576000] nxp-ohci nxp-ohci: SLsi Synopsys OHCI Host Controller
  487. [ 1.580000] nxp-ohci nxp-ohci: new USB bus registered, assigned bus number 3
  488. [ 1.588000] nxp-ohci nxp-ohci: irq 82, io mem 0xc0020000
  489. [ 1.652000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  490. [ 1.656000] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  491. [ 1.664000] usb usb3: Product: SLsi Synopsys OHCI Host Controller
  492. [ 1.668000] usb usb3: Manufacturer: Linux 3.4.39-s5p6818 ohci_hcd
  493. [ 1.676000] usb usb3: SerialNumber: nxp-ohci
  494. [ 1.680000] HDMI HPD State 0x0
  495. [ 1.684000] hub 3-0:1.0: USB hub found
  496. [ 1.688000] hub 3-0:1.0: 3 ports detected
  497. [ 1.692000] Initializing USB Mass Storage driver...
  498. [ 1.700000] usbcore: registered new interface driver usb-storage
  499. [ 1.704000] USB Mass Storage support registered.
  500. [ 1.708000] usbcore: registered new interface driver usbserial
  501. [ 1.716000] usbcore: registered new interface driver usbserial_generic
  502. [ 1.720000] USB Serial support registered for generic
  503. [ 1.724000] usbserial: USB Serial Driver core
  504. [ 1.732000] usbcore: registered new interface driver ftdi_sio
  505. [ 1.736000] USB Serial support registered for FTDI USB Serial Device
  506. [ 1.744000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
  507. [ 1.748000] usbcore: registered new interface driver option
  508. [ 1.752000] USB Serial support registered for GSM modem (1-port)
  509. [ 1.760000] usbcore: registered new interface driver pl2303
  510. [ 1.764000] USB Serial support registered for pl2303
  511. [ 1.768000] g_ether gadget: using random self ethernet address
  512. [ 1.776000] usb0: MAC a6:48:af:aa:da:da
  513. [ 1.780000] usb0: HOST MAC 82:cf:ce:fa:68:18
  514. [ 1.784000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
  515. [ 1.792000] g_ether gadget: g_ether ready
  516. [ 1.796000] mousedev: PS/2 mouse device common for all mice
  517. [ 1.800000] input: Nexell Keypad as /devices/platform/nxp-keypad/input/input0
  518. [ 1.808000] usbcore: registered new interface driver xpad
  519. [ 1.812000] i2c-core: driver [IT7260-ts] using legacy suspend method
  520. [ 1.820000] i2c-core: driver [IT7260-ts] using legacy resume method
  521. [ 1.824000] touchscreen-1wire initialized
  522. [ 1.832000] backlight-1wire initialized
  523. [ 1.836000] input: fa_ts_input as /devices/virtual/input/input1
  524. [ 1.840000] ts-if initialized
  525. [ 1.844000] [RTC] day=2016.01.01 time=08:13:25
  526. [ 1.852000] nxp-rtc nxp-rtc.0: rtc core: registered nxp-rtc as rtc0
  527. [ 1.856000] i2c /dev entries driver
  528. [ 1.860000] lirc_dev: IR Remote Control driver registered, major 248
  529. [ 1.868000] IR NEC protocol handler initialized
  530. [ 1.872000] IR RC5(x) protocol handler initialized
  531. [ 1.876000] IR RC6 protocol handler initialized
  532. [ 1.884000] IR JVC protocol handler initialized
  533. [ 1.888000] IR Sony protocol handler initialized
  534. [ 1.892000] IR RC5 (streamzap) protocol handler initialized
  535. [ 1.896000] IR SANYO protocol handler initialized
  536. [ 1.900000] IR LIRC bridge handler initialized
  537. [ 1.904000] gspca_main: v2.14.0 registered
  538. [ 1.912000] nxp_v4l2_probe entered
  539. [ 1.916000] ...................................ov5640_probe 2234
  540. [ 1.920000] ...................................ov5640_video_probe 2193
  541. [ 1.928000] i2c-nxp.0: ack was not received
  542. [ 1.932000] i2c->nxp.0: incomplete xfer (-6)
  543. [ 1.936000] ov5640 0-003c: reg_read: i2c read error, reg: 300a
  544. [ 1.940000] OV5640 read error!!!!!!!!!!!!!!!
  545. [ 1.948000] ov5640_initialize_ctrls.............1794...........
  546. [ 1.952000] create_nxp_out
  547. [ 1.952000] register_nxp_out
  548. [ 1.952000] usbcore: registered new interface driver uvcvideo
  549. [ 1.960000] USB Video Class driver (1.1.1)
  550. [ 1.964000] Driver for 1-wire Dallas network protocol.
  551. [ 1.968000] device-mapper: uevent: version 1.0.3
  552. [ 1.972000] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
  553. [ 1.980000] DVFS: ASV[2] IDS 13mA, Ro 127 -> Table [IDS 15mA, Ro 130]
  554. [ 1.988000] ASV 0 = 1400000 khz, 1240 mV
  555. [ 1.988000] ASV 1 = 1300000 khz, 1180 mV
  556. [ 1.988000] ASV 2 = 1200000 khz, 1140 mV
  557. [ 1.988000] ASV 3 = 1100000 khz, 1100 mV
  558. [ 1.988000] ASV 4 = 1000000 khz, 1060 mV
  559. [ 1.988000] ASV 5 = 900000 khz, 1040 mV
  560. [ 1.988000] ASV 6 = 800000 khz, 1000 mV
  561. [ 1.988000] ASV 7 = 700000 khz, 940 mV
  562. [ 1.988000] ASV 8 = 600000 khz, 940 mV
  563. [ 1.988000] ASV 9 = 500000 khz, 940 mV
  564. [ 1.988000] ASV 10 = 400000 khz, 940 mV
  565. [ 1.992000] DVFS: regulator vdd_arm_1.3V
  566. [ 1.996000] DVFS: cpu DVFS with PLL.1 [tables=11]
  567. [ 2.000000] cpuidle: using governor ladder
  568. [ 2.008000] cpuidle: using governor menu
  569. [ 2.012000] Synopsys Designware Multimedia Card Interface Driver
  570. [ 2.016000] dw_mmc dw_mmc.0: Using internal DMA controller.
  571. [ 2.024000] mmc0: no vmmc regulator found
  572. [ 2.028000] dw_mmc dw_mmc.0: Using external card detect irq 267 (io 161)
  573. [ 2.036000] dw_mmc dw_mmc.0: Version ID is 250a
  574. [ 2.040000] dw_mmc dw_mmc.0: DW MMC controller at irq 75, 32 bit host data width, 32 deep fifo hw timeout 500 ms
  575. [ 2.052000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  576. [ 2.060000] dw_mmc dw_mmc.1: Using internal DMA controller.
  577. [ 2.064000] mmc1: no vmmc regulator found
  578. [ 2.072000] dw_mmc dw_mmc.1: Version ID is 250a
  579. [ 2.076000] dw_mmc dw_mmc.1: DW MMC controller at irq 76, 32 bit host data width, 32 deep fifo hw timeout 500 ms
  580. [ 2.084000] Registered led device: led1
  581. [ 2.084000] Registered led device: led2
  582. [ 2.084000] usbcore: registered new interface driver usbhid
  583. [ 2.088000] usbhid: USB HID core driver
  584. [ 2.096000] snd pcm: register sound platform 'nxp-pcm'
  585. [ 2.100000] snd i2s: ch 0, master, iis mode, 48000(47999)hz, 32 FBITs, MCLK=12287880hz, RFS=256
  586. [ 2.144000] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  587. [ 2.148000] mmc0: new high speed SDHC card at address aaaa
  588. [ 2.156000] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
  589. [ 2.160000] mmcblk0: p1 p2
  590. [ 2.180000] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  591. [ 2.224000] asoc: ES8316 HiFi <-> nxp-i2s.0 mapping ok
  592. [ 2.228000] spdif-tx: 48000(47999)Hz, MCLK=12287880hz HDMI out
  593. [ 2.236000] asoc: dit-hifi <-> nxp-spdif-tx mapping ok
  594. [ 2.240000] GACT probability NOT on
  595. [ 2.244000] Mirror/redirect action on
  596. [ 2.248000] u32 classifier
  597. [ 2.248000] Actions configured
  598. [ 2.252000] Netfilter messages via NETLINK v0.30.
  599. [ 2.256000] nf_conntrack version 0.5.0 (13626 buckets, 54504 max)
  600. [ 2.264000] ctnetlink v0.93: registering with nfnetlink.
  601. [ 2.268000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  602. [ 2.276000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  603. [ 2.280000] xt_time: kernel timezone is -0000
  604. [ 2.284000] ip_tables: (C) 2000-2006 Netfilter Core Team
  605. [ 2.292000] arp_tables: (C) 2002 David S. Miller
  606. [ 2.296000] TCP: cubic registered
  607. [ 2.300000] Initializing XFRM netlink socket
  608. [ 2.304000] NET: Registered protocol family 10
  609. [ 2.308000] Mobile IPv6
  610. [ 2.312000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  611. [ 2.316000] IPv6 over IPv4 tunneling driver
  612. [ 2.320000] NET: Registered protocol family 17
  613. [ 2.324000] NET: Registered protocol family 15
  614. [ 2.328000] NET: Registered protocol family 35
  615. [ 2.332000] Registering the dns_resolver key type
  616. [ 2.336000] Registering SWP/SWPB emulation handler
  617. [ 2.344000] axp22_dcdc5: incomplete constraints, leaving on
  618. [ 2.348000] axp22_dcdc4: incomplete constraints, leaving on
  619. [ 2.356000] axp22_dcdc3: incomplete constraints, leaving on
  620. [ 2.360000] axp22_dcdc2: incomplete constraints, leaving on
  621. [ 2.364000] axp22_dcdc1: incomplete constraints, leaving on
  622. [ 2.372000] axp22_dc5ldo: incomplete constraints, leaving on
  623. [ 2.380000] axp22_eldo2: incomplete constraints, leaving on
  624. [ 2.384000] axp22_eldo1: incomplete constraints, leaving on
  625. [ 2.392000] axp22_dldo1: incomplete constraints, leaving on
  626. [ 2.396000] axp22_aldo3: incomplete constraints, leaving on
  627. [ 2.400000] axp22_aldo2: incomplete constraints, leaving on
  628. [ 2.404000] axp22_aldo1: incomplete constraints, leaving on
  629. [ 2.412000] axp22_ldo1: incomplete constraints, leaving on
  630. [ 2.416000] otg_wakelock_init: No USB transceiver found
  631. [ 2.420000] nxp-rtc nxp-rtc.0: setting system clock to 2016-01-01 08:13:25 UTC (1451636005)
  632. [ 2.432000] tmu[0] = trim 49:0, ret 1
  633. [ 2.432000] TMU: register tmu.0 to hwmon (max 1400000khz)
  634. [ 2.440000] ALSA device list:
  635. [ 2.440000] #0: I2S-ES8316
  636. [ 2.444000] #1: SPDIF-Transciever
  637. [ 2.448000] Freeing init memory: 220K
  638. [ 2.452000] Write protecting the kernel text section c0008000 - c07af000
  639. [ 2.460000] rodata_test: attempting to write to read-only section:
  640. [ 2.464000] write to read-only section trapped, success
  641. [ 3.132000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  642. [ 3.168000] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
  643. [ 3.756000] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
  644. [ 3.772000] systemd[1]: Detected architecture 'arm'.
  645. [ 4.176000] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  646. [ 4.188000] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  647. [ 4.200000] systemd[1]: Expecting device dev-ttySAC0.device...
  648. [ 4.208000] systemd[1]: Expecting device dev-ttyAMA0.device...
  649. [ 4.216000] systemd[1]: Starting Remote File Systems (Pre).
  650. [ 4.228000] systemd[1]: Reached target Remote File Systems (Pre).
  651. [ 4.232000] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  652. [ 4.240000] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  653. [ 4.248000] systemd[1]: Starting Paths.
  654. [ 4.252000] systemd[1]: Reached target Paths.
  655. [ 4.256000] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  656. [ 4.264000] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  657. [ 4.276000] systemd[1]: Starting Encrypted Volumes.
  658. [ 4.280000] systemd[1]: Reached target Encrypted Volumes.
  659. [ 4.284000] systemd[1]: Starting Swap.
  660. [ 4.288000] systemd[1]: Reached target Swap.
  661. [ 4.292000] systemd[1]: Starting Root Slice.
  662. [ 4.296000] systemd[1]: Created slice Root Slice.
  663. [ 4.300000] systemd[1]: Starting User and Session Slice.
  664. [ 4.308000] systemd[1]: Created slice User and Session Slice.
  665. [ 4.312000] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  666. [ 4.320000] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  667. [ 4.328000] systemd[1]: Starting Delayed Shutdown Socket.
  668. [ 4.332000] systemd[1]: Listening on Delayed Shutdown Socket.
  669. [ 4.336000] systemd[1]: Starting Journal Socket (/dev/log).
  670. [ 4.344000] systemd[1]: Listening on Journal Socket (/dev/log).
  671. [ 4.348000] systemd[1]: Starting udev Control Socket.
  672. [ 4.356000] systemd[1]: Listening on udev Control Socket.
  673. [ 4.360000] systemd[1]: Starting udev Kernel Socket.
  674. [ 4.364000] systemd[1]: Listening on udev Kernel Socket.
  675. [ 4.368000] systemd[1]: Starting Journal Socket.
  676. [ 4.376000] systemd[1]: Listening on Journal Socket.
  677. [ 4.380000] systemd[1]: Starting System Slice.
  678. [ 4.384000] systemd[1]: Created slice System Slice.
  679. [ 4.388000] systemd[1]: Starting system-getty.slice.
  680. [ 4.392000] systemd[1]: Created slice system-getty.slice.
  681. [ 4.400000] systemd[1]: Starting system-serial\x2dgetty.slice.
  682. [ 4.404000] systemd[1]: Created slice system-serial\x2dgetty.slice.
  683. [ 4.412000] systemd[1]: Starting Increase datagram queue length...
  684. [ 4.420000] systemd[1]: Starting Nameserver information manager...
  685. [ 4.424000] systemd[1]: Mounted Huge Pages File System.
  686. [ 4.428000] systemd[1]: Mounted POSIX Message Queue File System.
  687. [ 4.444000] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  688. [ 4.452000] systemd[1]: Mounting Debug File System...
  689. [ 4.492000] systemd[1]: Started Set Up Additional Binary Formats.
  690. [ 4.504000] systemd[1]: Starting Load Kernel Modules...
  691. [ 4.512000] systemd[1]: Starting udev Coldplug all Devices...
  692. [ 4.524000] systemd[1]: Starting Slices.
  693. [ 4.528000] systemd[1]: Reached target Slices.
  694. [ 4.536000] systemd[1]: Starting system-systemd\x2dfsck.slice.
  695. [ 4.540000] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  696. [ 4.548000] systemd[1]: Expecting device dev-mmcblk0p1.device...
  697. [ 4.556000] systemd[1]: Mounted Debug File System.
  698. [ 4.556000] Loading modules backported from Linux version v4.4.2-0-g1cb8570
  699. [ 4.556000] Backport generated by backports.git v4.4.2-1-0-gbec4037
  700. [ 4.592000] systemd[1]: Started Increase datagram queue length.
  701. [ 4.632000] systemd[1]: Started Create list of required static device nodes for the current kernel.
  702. [ 4.644000] systemd[1]: Starting Create Static Device Nodes in /dev...
  703. [ 4.648000] dhd_module_init: in
  704. [ 4.648000] ======== bcm_wlan_set_plat_data ========
  705. [ 4.648000] host_oob_irq: 187
  706. [ 4.648000] host_oob_irq_flags = 414
  707. [ 4.648000] dhd_wifi_platform_load: Enter
  708. [ 4.648000] Power-up adapter 'DHD generic adapter'
  709. [ 4.648000] wifi_platform_set_power = 1
  710. [ 4.648000] ======== PULL WL_REG_ON HIGH! ========
  711. [ 4.648000] wifi_pm: bcmdhd: 1
  712. [ 4.648000] systemd[1]: Starting Syslog Socket.
  713. [ 4.652000] systemd[1]: Listening on Syslog Socket.
  714. [ 4.656000] systemd[1]: Starting Journal Service...
  715. [ 4.664000] systemd[1]: Started Journal Service.
  716. [ 4.848000] systemd-udevd[212]: starting version 215
  717. [ 4.964000] wifi_platform_bus_enumerate device present 1
  718. [ 5.008000] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  719. [ 5.016000] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  720. [ 5.024000] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  721. [ 5.032000] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  722. [ 5.132000] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  723. [ 5.140000] mmc1: new high speed SDIO card at address 0001
  724. [ 5.172000] bcmsdh_register: register client driver
  725. [ 5.172000] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  726. [ 5.172000] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  727. [ 5.172000] bus num (host idx)=1, slot num (rca)=1
  728. [ 5.172000] found adapter info 'DHD generic adapter'
  729. [ 5.172000] dhdsdio_probe : no mutex held. set lock
  730. [ 5.172000] F1 signature read @0x18000000=0x1540a9a6
  731. [ 5.172000] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4
  732. [ 5.176000] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
  733. [ 5.176000] dhd_conf_set_chiprev: chip=0xa9a6, chiprev=0
  734. [ 5.176000] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt
  735. [ 5.180000] dhd_conf_read_config: PM = 0
  736. [ 5.180000] wl_create_event_handler(): thread:wl_event_handler:102 started
  737. [ 5.184000] tsk Enter, tsk = 0xe4101d78
  738. [ 5.184000] dhd_attach(): thread:dhd_watchdog_thread:104 started
  739. [ 5.188000] dhd_attach(): thread:dhd_dpc:105 started
  740. [ 5.188000] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
  741. [ 5.196000] dhd_attach(): thread:dhd_rxf:106 started
  742. [ 5.200000] dhd_deferred_work_init: work queue initialized
  743. [ 5.200000] dhdsdio_probe_init: set use_rxchain 0 from config.txt
  744. [ 5.212000] Dongle Host Driver, version 1.201.59.5 (r506368)
  745. [ 5.212000] Compiled in drivers/net/wireless/bcmdhd on Apr 20 2016 at 19:37:45
  746. [ 5.212000] Register interface [wlan0] MAC: 94:a1:a2:c0:a1:58
  747. [ 5.212000] dhd_prot_ioctl : bus is down. we have nothing to do
  748. [ 5.212000] bcmsdh_oob_intr_unregister: Enter
  749. [ 5.212000] bcmsdh_oob_intr_unregister: irq is not registered
  750. [ 5.212000] dhd_txglom_enable: enable 0
  751. [ 5.212000] dhd_bus_devreset: WLAN OFF DONE
  752. [ 5.212000] wifi_platform_set_power = 0
  753. [ 5.212000] ======== PULL WL_REG_ON LOW! ========
  754. [ 5.212000] wifi_pm: bcmdhd: 0
  755. [ 5.324000] dhdsdio_probe : the lock is released.
  756. [ 5.324000] dhd_module_init: Exit err=0
  757. [ 5.428000] Bluetooth: Core ver 2.21
  758. [ 5.432000] NET: Registered protocol family 31
  759. [ 5.436000] Bluetooth: HCI device and connection manager initialized
  760. [ 5.440000] Bluetooth: HCI socket layer initialized
  761. [ 5.444000] Bluetooth: L2CAP socket layer initialized
  762. [ 5.452000] Bluetooth: SCO socket layer initialized
  763. [ 5.472000] Bluetooth: HCI UART driver ver 2.3
  764. [ 5.476000] Bluetooth: HCI UART protocol H4 registered
  765. [ 5.480000] Bluetooth: HCI UART protocol BCM registered
  766. [ 5.496000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  767. [ 5.496000] Bluetooth: BNEP filters: protocol multicast
  768. [ 5.496000] cfg80211: World regulatory domain updated:
  769. [ 5.496000] cfg80211: DFS Master region: unset
  770. [ 5.496000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  771. [ 5.496000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  772. [ 5.496000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  773. [ 5.496000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  774. [ 5.496000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  775. [ 5.496000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  776. [ 5.496000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  777. [ 5.496000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  778. [ 5.496000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  779. [ 5.524000] bt_bcm: rfkill set_block On GPIOB.8
  780. [ 5.592000] Bluetooth: BNEP socket layer initialized
  781. [ 5.628000] setting PHY_BASEADDR_POWER_GATE, set 1
  782. [ 5.628000] setting PHY_BASEADDR_PMU_ISOLATE+4, set 0
  783. [ 5.632000] setting PHY_BASEADDR_PMU_ISOLATE+8, set 0
  784. [ 5.640000] setting PHY_BASEADDR_PMU_ISOLATE, set 1
  785. [ 5.644000] read PHY_BASEADDR_PMU_ISOLATE + 0xC
  786. [ 5.648000] Wait Power UP Ack(powerUpAck=0x00000000)
  787. [ 5.652000] setting ClockGen, set 1
  788. [ 5.656000] setting Reset VR addr(0xf0012008)
  789. [ 5.664000] setting PHY_BASEADDR_VR_PMU addr(0xf0072000)
  790. [ 5.668000] Vr: VR device driver loaded(ver1.2) for s5p6818
  791. [ 6.068000] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  792. [ 6.480000] systemd-journald[204]: Received request to flush runtime journal from PID 1
  793. [ 6.880000] eth0: device MAC address 9e:42:b9:bf:5a:7b
  794. [ 17.872000] eth0: no IPv6 routers present
  795. [ 80.748000] ADDRCONF(NETDEV_UP): usb0: link is not ready
  796. [ 80.780000] dhd_open: Enter e4c40800
  797. [ 80.780000] Dongle Host Driver, version 1.201.59.5 (r506368)
  798. [ 80.780000] Compiled in drivers/net/wireless/bcmdhd on Apr 20 2016 at 19:37:45
  799. [ 80.780000] wl_android_wifi_on in 1
  800. [ 80.780000] wl_android_wifi_on in 2: g_wifi_on=0
  801. [ 80.780000] wifi_platform_set_power = 1
  802. [ 80.780000] ======== PULL WL_REG_ON HIGH! ========
  803. [ 80.780000] wifi_pm: bcmdhd: 1
  804. [ 81.096000] sdio_reset_comm():
  805. [ 81.096000] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  806. [ 81.120000] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  807. [ 81.132000] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  808. [ 81.144000] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  809. [ 81.152000] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  810. [ 81.252000] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  811. [ 81.264000] dhd_bus_devreset: == WLAN ON ==
  812. [ 81.264000] F1 signature read @0x18000000=0x1540a9a6
  813. [ 81.272000] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4
  814. [ 81.272000] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
  815. [ 81.272000] dhdsdio_probe_init: set use_rxchain 0 from config.txt
  816. [ 81.272000] dhd_conf_read_config: PM = 0
  817. [ 81.272000] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm43438a0.bin
  818. [ 81.272000] Final fw_path=/lib/firmware/ap6212/fw_bcm43438a0.bin
  819. [ 81.272000] Final nv_path=/lib/firmware/ap6212/nvram.txt
  820. [ 81.272000] Final conf_path=/lib/firmware/ap6212/config.txt
  821. [ 81.364000] NVRAM version: AP6212_NVRAM_V1.0_20140603
  822. [ 81.368000] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  823. [ 81.424000] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  824. [ 81.424000] bcmsdh_oob_intr_register: Enter
  825. [ 81.424000] bcmsdh_oob_intr_register: HW_OOB enabled
  826. [ 81.424000] bcmsdh_oob_intr_register OOB irq=187 flags=414
  827. [ 81.424000] bcmsdh_oob_intr_register: enable_irq_wake
  828. [ 81.424000] dhd_conf_set_band: Set band 0
  829. [ 81.424000] dhd_preinit_ioctls: Set tcpack_sup_mode 0
  830. [ 81.428000] Firmware up: op_mode=0x0005, MAC=94:a1:a2:c0:a1:58
  831. [ 81.428000] dhd_conf_set_country: Set country CN, revision 0
  832. [ 81.492000] Country code: CN (CN/0)
  833. [ 81.492000] dhd_conf_set_roam: Set roam_off 1
  834. [ 81.508000] Firmware version = wl0: Jun 6 2014 14:50:39 version 7.10.226.49 (r) FWID 01-8962686a
  835. [ 81.508000] Driver: 1.201.59.5 (r506368)
  836. [ 81.508000] Firmware: wl0: Jun 6 2014 14:50:39 version 7.10.226.49 (r) FWID 01-8962686a
  837. [ 81.508000] dhd_txglom_enable: enable 0
  838. [ 81.508000] dhd_conf_set_disable_proptx: set disable_proptx 0
  839. [ 81.508000] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
  840. [ 81.512000] wl_android_wifi_on: Success
  841. [ 81.588000] dhd_open: Exit ret=0
  842. [ 83.268000] Connectting with bc:05:43:be:c1:e7 channel (13) ssid "Snort-Honeynet", len (14)
  843. [ 83.368000] wl_bss_connect_done succeeded with bc:05:43:be:c1:e7
  844. [ 83.380000] cfg80211: Regulatory domain changed to country: DE
  845. [ 83.384000] cfg80211: DFS Master region: ETSI
  846. [ 83.388000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  847. [ 83.396000] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  848. [ 83.404000] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  849. [ 83.408000] wl_bss_connect_done succeeded with bc:05:43:be:c1:e7
  850. [ 83.412000] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  851. [ 83.424000] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
  852. [ 83.432000] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  853. [ 91.208000] Bluetooth: RFCOMM socket layer initialized
  854. [ 91.208000] Bluetooth: RFCOMM ver 1.11
  855. [ 576.372000] ADDRCONF(NETDEV_UP): usb0: link is not ready
  856. [ 576.536000] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3
  857. [ 576.540000] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK
  858. [ 576.544000] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from bc:05:43:be:c1:e7
  859. [ 576.552000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  860. [ 576.812000] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3
  861. [ 576.812000] dhd_stop: Enter e4c40800
  862. [ 576.816000] wl_android_wifi_off in 1
  863. [ 576.816000] wl_android_wifi_off in 2: g_wifi_on=1
  864. [ 576.820000] bcmsdh_oob_intr_unregister: Enter
  865. [ 576.820000] dhd_txglom_enable: enable 0
  866. [ 576.820000] dhd_bus_devreset: WLAN OFF DONE
  867. [ 576.820000] wifi_platform_set_power = 0
  868. [ 576.820000] ======== PULL WL_REG_ON LOW! ========
  869. [ 576.820000] wifi_pm: bcmdhd: 0
  870. [ 576.932000] wl_android_wifi_off out
  871. [ 576.932000] dhd_stop: Exit
  872. [ 576.936000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  873. [ 577.588000] ADDRCONF(NETDEV_UP): usb0: link is not ready
  874. [ 577.596000] dhd_open: Enter e4c40800
  875. [ 577.596000] Dongle Host Driver, version 1.201.59.5 (r506368)
  876. [ 577.596000] Compiled in drivers/net/wireless/bcmdhd on Apr 20 2016 at 19:37:45
  877. [ 577.596000] wl_android_wifi_on in 1
  878. [ 577.596000] wl_android_wifi_on in 2: g_wifi_on=0
  879. [ 577.596000] wifi_platform_set_power = 1
  880. [ 577.596000] ======== PULL WL_REG_ON HIGH! ========
  881. [ 577.596000] wifi_pm: bcmdhd: 1
  882. [ 577.916000] sdio_reset_comm():
  883. [ 577.916000] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  884. [ 577.932000] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  885. [ 577.932000] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  886. [ 577.940000] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  887. [ 577.944000] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  888. [ 578.040000] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  889. [ 578.044000] dhd_bus_devreset: == WLAN ON ==
  890. [ 578.044000] F1 signature read @0x18000000=0x1540a9a6
  891. [ 578.052000] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4
  892. [ 578.052000] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
  893. [ 578.056000] dhdsdio_probe_init: set use_rxchain 0 from config.txt
  894. [ 578.056000] dhd_conf_read_config: PM = 0
  895. [ 578.056000] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm43438a0.bin
  896. [ 578.056000] Final fw_path=/lib/firmware/ap6212/fw_bcm43438a0.bin
  897. [ 578.056000] Final nv_path=/lib/firmware/ap6212/nvram.txt
  898. [ 578.056000] Final conf_path=/lib/firmware/ap6212/config.txt
  899. [ 578.136000] NVRAM version: AP6212_NVRAM_V1.0_20140603
  900. [ 578.140000] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  901. [ 578.196000] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  902. [ 578.196000] bcmsdh_oob_intr_register: Enter
  903. [ 578.196000] bcmsdh_oob_intr_register: HW_OOB enabled
  904. [ 578.196000] bcmsdh_oob_intr_register OOB irq=187 flags=414
  905. [ 578.196000] bcmsdh_oob_intr_register: enable_irq_wake
  906. [ 578.196000] dhd_conf_set_band: Set band 0
  907. [ 578.196000] dhd_preinit_ioctls: Set tcpack_sup_mode 0
  908. [ 578.196000] dhd_tcpack_suppress_set 376: already set to 0
  909. [ 578.200000] Firmware up: op_mode=0x0005, MAC=94:a1:a2:c0:a1:58
  910. [ 578.200000] dhd_conf_set_country: Set country CN, revision 0
  911. [ 578.268000] Country code: CN (CN/0)
  912. [ 578.268000] dhd_conf_set_roam: Set roam_off 1
  913. [ 578.284000] Firmware version = wl0: Jun 6 2014 14:50:39 version 7.10.226.49 (r) FWID 01-8962686a
  914. [ 578.284000] Driver: 1.201.59.5 (r506368)
  915. [ 578.284000] Firmware: wl0: Jun 6 2014 14:50:39 version 7.10.226.49 (r) FWID 01-8962686a
  916. [ 578.284000] dhd_txglom_enable: enable 0
  917. [ 578.284000] dhd_conf_set_disable_proptx: set disable_proptx 0
  918. [ 578.284000] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
  919. [ 578.284000] wl_android_wifi_on: Success
  920. [ 578.360000] dhd_open: Exit ret=0
  921. [ 579.708000] Connectting with bc:05:43:be:c1:e7 channel (13) ssid "Snort-Honeynet", len (14)
  922. [ 579.804000] wl_bss_connect_done succeeded with bc:05:43:be:c1:e7
  923. [ 579.868000] wl_bss_connect_done succeeded with bc:05:43:be:c1:e7
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!