Advertisement
Guest User

Untitled

a guest
Sep 14th, 2011
73
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.18 KB | None | 0 0
  1. Copyright (c) 1992-2011 The FreeBSD Project.
  2. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  3. The Regents of the University of California. All rights reserved.
  4. FreeBSD is a registered trademark of The FreeBSD Foundation.
  5. FreeBSD 9.0-BETA2 #0: Tue Sep 13 19:10:14 EEST 2011
  6. root@imacfbsd:/usr/obj/usr/src/sys/GENERIC64 powerpc
  7. WARNING: WITNESS option enabled, expect reduced performance.
  8. module_register: module nexus/sc already exists!
  9. Module nexus/sc failed to register: 17
  10. cpu0: IBM PowerPC 970FX revision 3.0, 900.32 MHz
  11. cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU>
  12. cpu0: HID0 511081<NAP,DPM,NHR,TBEN,ENATTN>
  13. real memory = 1054519296 (1005 MB)
  14. avail memory = 976125952 (930 MB)
  15. kbd0 at kbdmux0
  16. nexus0: <Open Firmware Nexus device>
  17. cpulist0: <Open Firmware CPU Group> on nexus0
  18. cpu0: <Open Firmware CPU> on cpulist0
  19. pcr0: <PPC 970 Power Control Register> on cpu0
  20. unin0: <Apple UniNorth System Controller> on nexus0
  21. unin0: Version 57
  22. iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff on unin0
  23. iicbus0: <OFW I2C bus> on iichb0
  24. iicbus0: <unknown card> at addr 0x1c0
  25. htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff irq 96 on unin0
  26. pcib0: <Apple U3 Host-AGP bridge> on nexus0
  27. pci0: <OFW PCI bus> on pcib0
  28. vgapci0: <VGA-compatible display> port 0x400-0x4ff mem 0x98000000-0x9fffffff,0x90000000-0x9000ffff irq 59 at device 16.0 on pci0
  29. agp0: <Apple U3 AGP Bridge> on hostb0
  30. pcib1: <IBM CPC9X5 HyperTransport Tunnel> on nexus0
  31. pcib1: 86 HT IRQs on device 1.0
  32. pci1: <OFW PCI bus> on pcib1
  33. pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1
  34. pci2: <OFW PCI bus> on pcib2
  35. gem0: <Apple Shasta GMAC Ethernet> mem 0x80400000-0x805fffff irq 40 at device 15.0 on pci2
  36. miibus0: <MII bus> on gem0
  37. ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
  38. ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
  39. gem0: 10kB RX FIFO, 4kB TX FIFO
  40. gem0: Ethernet address: 00:11:24:39:7d:fc
  41. pcib3: <OFW PCI-PCI bridge> at device 2.0 on pci1
  42. pci3: <OFW PCI bus> on pcib3
  43. macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 on pci3
  44. openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on macio0
  45. macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0
  46. scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 23,17,18,24,19,20 on macio0
  47. uart0: <z8530, channel A> on scc0
  48. uart1: <z8530, channel B> on scc0
  49. iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 27 on macio0
  50. iicbus1: <OFW I2C bus> on iichb1
  51. iicbus1: <unknown card> at addr 0x1c0
  52. snapper0: <Texas Instruments TAS3004 Audio Codec> at addr 0x6a on iicbus1
  53. pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 28,11,12,29,13,14 on macio0
  54. pci3: <network> at device 1.0 (no driver attached)
  55. ohci0: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 70 at device 11.0 on pci3
  56. usbus0: <NEC uPD 9210 USB controller> on ohci0
  57. ohci1: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 70 at device 11.1 on pci3
  58. usbus1: <NEC uPD 9210 USB controller> on ohci1
  59. ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x80080000-0x800800ff irq 70 at device 11.2 on pci3
  60. usbus2: EHCI version 1.0
  61. usbus2: <NEC uPD 720100 USB 2.0 controller> on ehci0
  62. pcib4: <OFW PCI-PCI bridge> at device 3.0 on pci1
  63. pci4: <OFW PCI bus> on pcib4
  64. atapci0: <ServerWorks K2 SATA150 controller> mem 0x80102000-0x80103fff irq 10 at device 12.0 on pci4
  65. ata2: <ATA channel 0> on atapci0
  66. ata3: <ATA channel 1> on atapci0
  67. ata4: <ATA channel 2> on atapci0
  68. ata5: <ATA channel 3> on atapci0
  69. ata0: <Shasta Kauai ATA Controller> mem 0x80104000-0x80107fff irq 38 at device 13.0 on pci4
  70. fwohci0: <1394 Open Host Controller Interface> mem 0x80100000-0x80100fff irq 39 at device 14.0 on pci4
  71. fwohci0: OHCI version 1.0 (ROM=0)
  72. fwohci0: No. of Isochronous channels is 8.
  73. fwohci0: EUI64 00:11:24:ff:fe:39:7d:fc
  74. fwohci0: invalid speed 7 (fixed to 3).
  75. fwohci0: Phy 1394a available S800, 2 ports.
  76. fwohci0: Link S800, max_rec 4096 bytes.
  77. firewire0: <IEEE1394(FireWire) bus> on fwohci0
  78. fwe0: <Ethernet over FireWire> on firewire0
  79. if_fwe0: Fake Ethernet address: 02:11:24:39:7d:fc
  80. fwe0: Ethernet address: 02:11:24:39:7d:fc
  81. sbp0: <SBP-2/SCSI over FireWire> on firewire0
  82. fwohci0: Initiate bus reset
  83. fwohci0: fwohci_intr_core: BUS reset
  84. fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, CYCLEMASTER mode
  85. smu0: <Apple System Management Unit> on nexus0
  86. iichb2: <SMU I2C controller> on smu0
  87. iicbus2: <OFW I2C bus> on iichb2
  88. ds17750: <Temp-Monitor DS1775> at addr 0x92 on iicbus2
  89. iicbus2: <unknown card> at addr 0x52
  90. iicbus2: <unknown card> at addr 0xd4
  91. iichb3: <SMU I2C controller> on smu0
  92. iicbus3: <OFW I2C bus> on iichb3
  93. sc0: <System console> on nexus0
  94. sc0: Unknown <16 virtual consoles, flags=0x300>
  95. Timecounter "timebase" frequency 33333333 Hz quality 0
  96. Event timer "decrementer" frequency 33333333 Hz quality 1000
  97. Timecounters tick every 1.000 msec
  98. firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
  99. firewire0: bus manager 0
  100. usbus0: 12Mbps Full Speed USB v1.0
  101. usbus1: 12Mbps Full Speed USB v1.0
  102. ugen0.1: <NEC> at usbus0
  103. uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
  104. ugen1.1: <NEC> at usbus1
  105. uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
  106. usbus2: 480Mbps High Speed USB v2.0
  107. ugen2.1: <NEC> at usbus2
  108. uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
  109. uhub0: 3 ports with 3 removable, self powered
  110. uhub1: 2 ports with 2 removable, self powered
  111. uhub2: 5 ports with 5 removable, self powered
  112. ugen0.2: <Logitech> at usbus0
  113. ukbd0: <Logitech USB Receiver, class 0/0, rev 1.10/22.40, addr 2> on usbus0
  114. kbd1 at ukbd0
  115. cd0 at ata0 bus 0 scbus4 target 0 lun 0
  116. cd0: <MATSHITA CD-RW CW-8124 DA0D> Removable CD-ROM SCSI-0 device
  117. cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
  118. cd0: cd present [284488 x 2048 byte records]
  119. ums0: <Logitech USB Receiver, class 0/0, rev 1.10/22.40, addr 2> on usbus0
  120. ada0 at ata2 bus 0 scbus0 target 0 lun 0ums0: 10 buttons and [XYZT] coordinates ID=2
  121.  
  122. ada0: <ST3320620AS 3.AAC> ATA-7 SATA 1.x device
  123. ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
  124. ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
  125. ada0: Previously was known as ad0
  126. WARNING: WITNESS option enabled, expect reduced performance.
  127. (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 4 57 47 0 0 1 0
  128. (cd0:ata0:0:0:0): CAM status: SCSI Status Error
  129. (cd0:ata0:0:0:0): SCSI status: Check Condition
  130. (cd0:ata0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:64,0 (Illegal mode for this track)
  131. (cd0:ata0:0:0:0): cddone: got error 0x6 back
  132. ugen0.3: <vendor 0x05ac> at usbus0
  133. ukbd1: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 3> on usbus0
  134. kbd2 at ukbd1
  135. ums1: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 3> on usbus0
  136. ums1: 5 buttons and [XY] coordinates ID=0
  137. (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 4 57 47 0 0 1 0
  138. (cd0:ata0:0:0:0): CAM status: SCSI Status Error
  139. (cd0:ata0:0:0:0): SCSI status: Check Condition
  140. (cd0:ata0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:64,0 (Illegal mode for this track)
  141. (cd0:ata0:0:0:0): cddone: got error 0x6 back
  142. (cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 4 57 47 0 0 1 0
  143. (cd0:ata0:0:0:0): CAM status: SCSI Status Error
  144. (cd0:ata0:0:0:0): SCSI status: Check Condition
  145. (cd0:ata0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:64,0 (Illegal mode for this track)
  146. (cd0:ata0:0:0:0): cddone: got error 0x6 back
  147. Trying to mount root from ufs:/dev/ada0s3 [rw]...
  148. lock order reversal:
  149. 1st 0x1702638 ufs (ufs) @ /usr/src/sys/kern/vfs_lookup.c:530
  150. 2nd 0xc0000000156dd998 bufwait (bufwait) @ /usr/src/sys/ufs/ffs/ffs_vnops.c:260
  151. 3rd 0x48da818 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:2134
  152. KDB: stack backtrace:
  153. 0xc000000025801010: at .kdb_backtrace+0x5c
  154. 0xc000000025801140: at ._witness_debugger+0x3c
  155. 0xc0000000258011d0: at .witness_checkorder+0x8e4
  156. 0xc0000000258012c0: at .__lockmgr_args+0x8d0
  157. 0xc000000025801400: at .ffs_lock+0xa8
  158. 0xc0000000258014b0: at .VOP_LOCK1_APV+0xfc
  159. 0xc000000025801540: at ._vn_lock+0x80
  160. 0xc000000025801620: at .vget+0xc0
  161. 0xc0000000258016d0: at .vfs_hash_get+0x12c
  162. 0xc000000025801790: at .ffs_vgetf+0x60
  163. 0xc000000025801870: at .softdep_sync_buf+0xaa0
  164. 0xc0000000258019a0: at .ffs_syncvnode+0x208
  165. 0xc000000025801a80: at .ffs_truncate+0x5b4
  166. 0xc000000025801cc0: at .ufs_direnter+0x92c
  167. 0xc000000025801df0: at .ufs_makeinode+0x504
  168. 0xc000000025802010: at .ufs_create+0x44
  169. 0xc000000025802090: at .VOP_CREATE_APV+0xec
  170. 0xc000000025802120: at .vn_open_cred+0x220
  171. 0xc000000025802300: at .vn_open+0x24
  172. 0xc000000025802380: at .kern_openat+0x1b4
  173. 0xc000000025802550: at .kern_open+0x34
  174. 0xc0000000258025d0: at .open+0x28
  175. 0xc000000025802650: at .syscallenter+0x2bc
  176. 0xc000000025802700: at .trap+0x190
  177. 0xc000000025802890: at .powerpc_interrupt+0x130
  178. 0xc000000025802930: user SC trap by 0x501e9fb8: srr1=0x900000000000d032
  179. r1=0x7fffffffffffc8d0 cr=0x40482082 xer=0x20000000 ctr=0x501e9fb0
  180. pid 1440 (Xorg), uid 0: exited on signal 6 (core dumped)
  181. lock order reversal:
  182. 1st 0xc00000001584d938 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2658
  183. 2nd 0x24a30a00 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:284
  184. KDB: stack backtrace:
  185. 0xc000000025950830: at .kdb_backtrace+0x5c
  186. 0xc000000025950960: at ._witness_debugger+0x3c
  187. 0xc0000000259509f0: at .witness_checkorder+0x8e4
  188. 0xc000000025950ae0: at ._sx_xlock+0x88
  189. 0xc000000025950b90: at .ufsdirhash_acquire+0x3c
  190. 0xc000000025950c20: at .ufsdirhash_add+0x30
  191. 0xc000000025950cc0: at .ufs_direnter+0x744
  192. 0xc000000025950df0: at .ufs_makeinode+0x504
  193. 0xc000000025951010: at .ufs_create+0x44
  194. 0xc000000025951090: at .VOP_CREATE_APV+0xec
  195. 0xc000000025951120: at .vn_open_cred+0x220
  196. 0xc000000025951300: at .vn_open+0x24
  197. 0xc000000025951380: at .kern_openat+0x1b4
  198. 0xc000000025951550: at .kern_open+0x34
  199. 0xc0000000259515d0: at .open+0x28
  200. 0xc000000025951650: at .syscallenter+0x2bc
  201. 0xc000000025951700: at .trap+0x190
  202. 0xc000000025951890: at .powerpc_interrupt+0x130
  203. 0xc000000025951930: user SC trap by 0x504d4fb8: srr1=0x900000000000f032
  204. r1=0x7fffffffffffc3f0 cr=0x44404042 xer=0x20000000 ctr=0x504d4fb0
  205. pid 39681 (Xorg), uid 0: exited on signal 6 (core dumped)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement