Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.5.0-23-generic (buildd@komainu) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #35-Ubuntu SMP Thu Jan 24 13:15:40 UTC 2013 (Ubuntu 3.5.0-23.35-generic 3.5.7.2)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-23-generic root=UUID=23f6459c-4e24-452c-b6db-ce56d0461a59 ro quiet splash vt.handoff=7
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fff2fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffffff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI 2.3 present.
- [ 0.000000] DMI: /K8M800-8237, BIOS F2 07/06/2005
- [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] AGP bridge at 00:00:00
- [ 0.000000] Aperture from AGP @ c0000000 old size 32 MB
- [ 0.000000] Aperture from AGP @ c0000000 size 256 MB (APSIZE f00)
- [ 0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-C7FFF write-protect
- [ 0.000000] C8000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-through
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
- [ 0.000000] 1 base 00C0000000 mask FFF0000000 write-combining
- [ 0.000000] 2 disabled
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] found SMP MP-table at [mem 0x000f51c0-0x000f51cf] mapped at [ffff8800000f51c0]
- [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
- [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x7ffeffff]
- [ 0.000000] [mem 0x00000000-0x7fdfffff] page 2M
- [ 0.000000] [mem 0x7fe00000-0x7ffeffff] page 4k
- [ 0.000000] kernel direct mapping tables up to 0x7ffeffff @ [mem 0x1fffc000-0x1fffffff]
- [ 0.000000] RAMDISK: [mem 0x355b4000-0x36ad1fff]
- [ 0.000000] ACPI: RSDP 00000000000f6b40 00014 (v00 VIAK8 )
- [ 0.000000] ACPI: RSDT 000000007fff3000 0002C (v01 VIAK8 AWRDACPI 42302E31 AWRD 01010101)
- [ 0.000000] ACPI: FACP 000000007fff3040 00074 (v01 VIAK8 AWRDACPI 42302E31 AWRD 01010101)
- [ 0.000000] ACPI: DSDT 000000007fff30c0 0482C (v01 VIAK8 AWRDACPI 00001000 MSFT 0100000C)
- [ 0.000000] ACPI: FACS 000000007fff0000 00040
- [ 0.000000] ACPI: APIC 000000007fff7900 0005A (v01 VIAK8 AWRDACPI 42302E31 AWRD 01010101)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] Scanning NUMA topology in Northbridge 24
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffeffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ffeffff]
- [ 0.000000] NODE_DATA [mem 0x7ffec000-0x7ffeffff]
- [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
- [ 0.000000] node 0: [mem 0x00100000-0x7ffeffff]
- [ 0.000000] On node 0 totalpages: 524157
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 6 pages reserved
- [ 0.000000] DMA zone: 3911 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 8128 pages used for memmap
- [ 0.000000] DMA32 zone: 512048 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- [ 0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s83584 r8192 d22912 u2097152
- [ 0.000000] pcpu-alloc: s83584 r8192 d22912 u2097152 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515959
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-23-generic root=UUID=23f6459c-4e24-452c-b6db-ce56d0461a59 ro quiet splash vt.handoff=7
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Checking aperture...
- [ 0.000000] AGP bridge at 00:00:00
- [ 0.000000] Aperture from AGP @ c0000000 old size 32 MB
- [ 0.000000] Aperture from AGP @ c0000000 size 256 MB (APSIZE f00)
- [ 0.000000] Node 0: aperture @ c0000000 size 256 MB
- [ 0.000000] Memory: 2026272k/2097088k available (6718k kernel code, 460k absent, 70356k reserved, 6452k data, 932k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:16640 nr_irqs:256 16
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] vt handoff: transparent VT on vt#7
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 8388608 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2210.161 MHz processor.
- [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.32 BogoMIPS (lpj=8840644)
- [ 0.008010] pid_max: default: 32768 minimum: 301
- [ 0.008043] Security Framework initialized
- [ 0.008069] AppArmor: AppArmor initialized
- [ 0.008071] Yama: becoming mindful.
- [ 0.008318] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.010208] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.011126] Mount-cache hash table entries: 256
- [ 0.011424] Initializing cgroup subsys cpuacct
- [ 0.011427] Initializing cgroup subsys memory
- [ 0.011443] Initializing cgroup subsys devices
- [ 0.011445] Initializing cgroup subsys freezer
- [ 0.011447] Initializing cgroup subsys blkio
- [ 0.011449] Initializing cgroup subsys perf_event
- [ 0.011486] tseg: 0000000000
- [ 0.011506] mce: CPU supports 5 MCE banks
- [ 0.011551] SMP alternatives: switching to UP code
- [ 0.019792] Freeing SMP alternatives: 24k freed
- [ 0.019815] ACPI: Core revision 20120320
- [ 0.022958] ftrace: allocating 25140 entries in 99 pages
- [ 0.033234] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
- [ 0.074132] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00
- [ 0.076004] Performance Events: AMD PMU driver.
- [ 0.076004] ... version: 0
- [ 0.076004] ... bit width: 48
- [ 0.076004] ... generic registers: 4
- [ 0.076004] ... value mask: 0000ffffffffffff
- [ 0.076004] ... max period: 00007fffffffffff
- [ 0.076004] ... fixed-purpose events: 0
- [ 0.076004] ... event mask: 000000000000000f
- [ 0.076004] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.076004] Brought up 1 CPUs
- [ 0.076004] Total of 1 processors activated (4420.32 BogoMIPS).
- [ 0.076004] devtmpfs: initialized
- [ 0.076004] EVM: security.selinux
- [ 0.076004] EVM: security.SMACK64
- [ 0.076004] EVM: security.capability
- [ 0.076004] PM: Registering ACPI NVS region [mem 0x7fff0000-0x7fff2fff] (12288 bytes)
- [ 0.076004] dummy:
- [ 0.076004] RTC time: 22:29:06, date: 02/13/13
- [ 0.076004] NET: Registered protocol family 16
- [ 0.076004] node 0 link 0: io port [1000, fffff]
- [ 0.076004] TOM: 0000000080000000 aka 2048M
- [ 0.076004] node 0 link 0: mmio [a0000, bffff]
- [ 0.076004] node 0 link 0: mmio [80000000, ffb7ffff]
- [ 0.076004] bus: [00, ff] on node 0 link 0
- [ 0.076004] bus: 00 [io 0x0000-0xffff]
- [ 0.076004] bus: 00 [mem 0x000a0000-0x000bffff]
- [ 0.076004] bus: 00 [mem 0x80000000-0xfcffffffff]
- [ 0.076072] ACPI: bus type pci registered
- [ 0.076135] PCI: Using configuration type 1 for base access
- [ 0.077237] bio: create slab <bio-0> at 0
- [ 0.077351] ACPI: Added _OSI(Module Device)
- [ 0.077353] ACPI: Added _OSI(Processor Device)
- [ 0.077355] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.077356] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.077927] ACPI: EC: Look up EC in DSDT
- [ 0.078631] ACPI: Actual Package length (6) is larger than NumElements field (4), truncated
- [ 0.078634]
- [ 0.080767] ACPI: Interpreter enabled
- [ 0.080776] ACPI: (supports S0 S1 S4 S5)
- [ 0.080797] ACPI: Using IOAPIC for interrupt routing
- [ 0.084124] ACPI: No dock devices found.
- [ 0.084130] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- [ 0.084190] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.084266] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- [ 0.084270] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
- [ 0.084272] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- [ 0.084275] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
- [ 0.084277] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
- [ 0.084279] PCI: root bus 00: hardware-probed resources
- [ 0.084324] PCI host bridge to bus 0000:00
- [ 0.084328] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
- [ 0.084331] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.084333] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff]
- [ 0.084350] pci 0000:00:00.0: [1106:0204] type 00 class 0x060000
- [ 0.084361] pci 0000:00:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
- [ 0.084430] pci 0000:00:00.1: [1106:1204] type 00 class 0x060000
- [ 0.084464] pci 0000:00:00.2: [1106:2204] type 00 class 0x060000
- [ 0.084499] pci 0000:00:00.3: [1106:3204] type 00 class 0x060000
- [ 0.084534] pci 0000:00:00.4: [1106:4204] type 00 class 0x060000
- [ 0.084570] pci 0000:00:00.7: [1106:7204] type 00 class 0x060000
- [ 0.084607] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400
- [ 0.084644] pci 0000:00:01.0: supports D1
- [ 0.084668] pci 0000:00:09.0: [1106:3038] type 00 class 0x0c0300
- [ 0.084707] pci 0000:00:09.0: reg 20: [io 0xb000-0xb01f]
- [ 0.084741] pci 0000:00:09.0: supports D1 D2
- [ 0.084744] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.084761] pci 0000:00:09.1: [1106:3038] type 00 class 0x0c0300
- [ 0.084799] pci 0000:00:09.1: reg 20: [io 0xb400-0xb41f]
- [ 0.084833] pci 0000:00:09.1: supports D1 D2
- [ 0.084836] pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.084853] pci 0000:00:09.2: [1106:3104] type 00 class 0x0c0320
- [ 0.084867] pci 0000:00:09.2: reg 10: [mem 0xe3001000-0xe30010ff]
- [ 0.084925] pci 0000:00:09.2: supports D1 D2
- [ 0.084928] pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.084950] pci 0000:00:0a.0: [10ec:8169] type 00 class 0x020000
- [ 0.084964] pci 0000:00:0a.0: reg 10: [io 0xb800-0xb8ff]
- [ 0.084973] pci 0000:00:0a.0: reg 14: [mem 0xe3000000-0xe30000ff]
- [ 0.085006] pci 0000:00:0a.0: reg 30: [mem 0x00000000-0x0000ffff pref]
- [ 0.085029] pci 0000:00:0a.0: supports D1 D2
- [ 0.085031] pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold
- [ 0.085046] pci 0000:00:0b.0: [109e:0350] type 00 class 0x040000
- [ 0.085057] pci 0000:00:0b.0: reg 10: [mem 0xe3002000-0xe3002fff pref]
- [ 0.085118] pci 0000:00:0f.0: [1106:3149] type 00 class 0x010400
- [ 0.085133] pci 0000:00:0f.0: reg 10: [io 0xbc00-0xbc07]
- [ 0.085141] pci 0000:00:0f.0: reg 14: [io 0xc000-0xc003]
- [ 0.085149] pci 0000:00:0f.0: reg 18: [io 0xc400-0xc407]
- [ 0.085158] pci 0000:00:0f.0: reg 1c: [io 0xc800-0xc803]
- [ 0.085167] pci 0000:00:0f.0: reg 20: [io 0xcc00-0xcc0f]
- [ 0.085175] pci 0000:00:0f.0: reg 24: [io 0xd000-0xd0ff]
- [ 0.085217] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
- [ 0.085257] pci 0000:00:0f.1: reg 20: [io 0xd400-0xd40f]
- [ 0.085313] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
- [ 0.085352] pci 0000:00:10.0: reg 20: [io 0xd800-0xd81f]
- [ 0.085386] pci 0000:00:10.0: supports D1 D2
- [ 0.085388] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.085407] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
- [ 0.085446] pci 0000:00:10.1: reg 20: [io 0xdc00-0xdc1f]
- [ 0.085480] pci 0000:00:10.1: supports D1 D2
- [ 0.085482] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.085499] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
- [ 0.085538] pci 0000:00:10.2: reg 20: [io 0xe000-0xe01f]
- [ 0.085572] pci 0000:00:10.2: supports D1 D2
- [ 0.085575] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.085592] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
- [ 0.085631] pci 0000:00:10.3: reg 20: [io 0xe400-0xe41f]
- [ 0.085665] pci 0000:00:10.3: supports D1 D2
- [ 0.085667] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.085685] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
- [ 0.085698] pci 0000:00:10.4: reg 10: [mem 0xe3003000-0xe30030ff]
- [ 0.085758] pci 0000:00:10.4: supports D1 D2
- [ 0.085760] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.085782] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
- [ 0.085835] HPET not enabled in BIOS. You might try hpet=force boot option
- [ 0.085878] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
- [ 0.085893] pci 0000:00:11.5: reg 10: [io 0xe800-0xe8ff]
- [ 0.085953] pci 0000:00:11.5: supports D1 D2
- [ 0.085973] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
- [ 0.085992] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
- [ 0.086009] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
- [ 0.086024] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
- [ 0.086075] pci 0000:01:00.0: [1002:9596] type 00 class 0x030000
- [ 0.086091] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
- [ 0.086098] pci 0000:01:00.0: reg 14: [io 0xa000-0xa0ff]
- [ 0.086106] pci 0000:01:00.0: reg 18: [mem 0xe1000000-0xe100ffff]
- [ 0.086129] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
- [ 0.086159] pci 0000:01:00.0: supports D1 D2
- [ 0.086177] pci 0000:01:00.1: [1002:aa20] type 00 class 0x040300
- [ 0.086190] pci 0000:01:00.1: reg 10: [mem 0xe1010000-0xe1013fff]
- [ 0.086241] pci 0000:01:00.1: supports D1 D2
- [ 0.086272] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.086276] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
- [ 0.086280] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe1ffffff]
- [ 0.086284] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
- [ 0.086292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.086475] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
- [ 0.112687] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
- [ 0.112762] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *6 7 10 11 12)
- [ 0.112839] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
- [ 0.112916] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
- [ 0.112974] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
- [ 0.113030] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
- [ 0.113086] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
- [ 0.113141] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
- [ 0.113244] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
- [ 0.113341] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
- [ 0.113454] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
- [ 0.113550] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
- [ 0.113698] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.113700] vgaarb: loaded
- [ 0.113701] vgaarb: bridge control possible 0000:01:00.0
- [ 0.113921] SCSI subsystem initialized
- [ 0.114010] libata version 3.00 loaded.
- [ 0.114036] ACPI: bus type usb registered
- [ 0.114065] usbcore: registered new interface driver usbfs
- [ 0.114079] usbcore: registered new interface driver hub
- [ 0.114109] usbcore: registered new device driver usb
- [ 0.114200] PCI: Using ACPI for IRQ routing
- [ 0.114204] PCI: pci_cache_line_size set to 64 bytes
- [ 0.114217] pci 0000:00:00.0: address space collision: [mem 0xc0000000-0xcfffffff pref] conflicts with GART [mem 0xc0000000-0xcfffffff]
- [ 0.114300] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
- [ 0.114302] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
- [ 0.114429] NetLabel: Initializing
- [ 0.114430] NetLabel: domain hash size = 128
- [ 0.114431] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.114449] NetLabel: unlabeled traffic allowed by default
- [ 0.123967] AppArmor: AppArmor Filesystem Enabled
- [ 0.124045] pnp: PnP ACPI init
- [ 0.124068] ACPI: bus type pnp registered
- [ 0.124283] pnp 00:00: [mem 0x000d4400-0x000d7fff]
- [ 0.124285] pnp 00:00: [mem 0x000f0000-0x000f7fff]
- [ 0.124288] pnp 00:00: [mem 0x000f8000-0x000fbfff]
- [ 0.124290] pnp 00:00: [mem 0x000fc000-0x000fffff]
- [ 0.124292] pnp 00:00: [mem 0x7fff0000-0x7fffffff]
- [ 0.124295] pnp 00:00: [mem 0xffff0000-0xffffffff]
- [ 0.124297] pnp 00:00: [mem 0x00000000-0x0009ffff]
- [ 0.124299] pnp 00:00: [mem 0x00100000-0x7ffeffff]
- [ 0.124302] pnp 00:00: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.124304] pnp 00:00: [mem 0xfec00000-0xfec00fff]
- [ 0.124307] pnp 00:00: [mem 0xfee00000-0xfee00fff]
- [ 0.124309] pnp 00:00: [mem 0xfff80000-0xfffeffff]
- [ 0.124318] pnp 00:00: disabling [mem 0x000d4400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
- [ 0.124322] pnp 00:00: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
- [ 0.124325] pnp 00:00: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
- [ 0.124328] pnp 00:00: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
- [ 0.124332] pnp 00:00: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
- [ 0.124335] pnp 00:00: disabling [mem 0x00100000-0x7ffeffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
- [ 0.124412] system 00:00: [mem 0x7fff0000-0x7fffffff] could not be reserved
- [ 0.124416] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
- [ 0.124419] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.124422] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.124425] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
- [ 0.124430] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.124487] pnp 00:01: [bus 00-ff]
- [ 0.124490] pnp 00:01: [io 0x0cf8-0x0cff]
- [ 0.124493] pnp 00:01: [io 0x0000-0x0cf7 window]
- [ 0.124495] pnp 00:01: [io 0x0d00-0xffff window]
- [ 0.124498] pnp 00:01: [mem 0x000a0000-0x000bffff window]
- [ 0.124500] pnp 00:01: [mem 0x000c0000-0x000dffff window]
- [ 0.124502] pnp 00:01: [mem 0x80000000-0xfebfffff window]
- [ 0.124546] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
- [ 0.124564] pnp 00:02: [io 0x4000-0x407f]
- [ 0.124566] pnp 00:02: [io 0x40f0-0x40ff]
- [ 0.124568] pnp 00:02: [io 0x5000-0x500f]
- [ 0.124605] system 00:02: [io 0x4000-0x407f] has been reserved
- [ 0.124608] system 00:02: [io 0x40f0-0x40ff] has been reserved
- [ 0.124611] system 00:02: [io 0x5000-0x500f] has been reserved
- [ 0.124614] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.124906] pnp 00:03: [io 0x0010-0x001f]
- [ 0.124908] pnp 00:03: [io 0x0022-0x003f]
- [ 0.124911] pnp 00:03: [io 0x0044-0x005f]
- [ 0.124913] pnp 00:03: [io 0x0062-0x0063]
- [ 0.124915] pnp 00:03: [io 0x0065-0x006f]
- [ 0.124921] pnp 00:03: [io 0x0074-0x007f]
- [ 0.124923] pnp 00:03: [io 0x0091-0x0093]
- [ 0.124925] pnp 00:03: [io 0x00a2-0x00bf]
- [ 0.124927] pnp 00:03: [io 0x00e0-0x00ef]
- [ 0.124930] pnp 00:03: [io 0x04d0-0x04d1]
- [ 0.124932] pnp 00:03: [io 0x0290-0x029f]
- [ 0.124934] pnp 00:03: [io 0x0800-0x0805]
- [ 0.124986] system 00:03: [io 0x04d0-0x04d1] has been reserved
- [ 0.124989] system 00:03: [io 0x0290-0x029f] has been reserved
- [ 0.124992] system 00:03: [io 0x0800-0x0805] has been reserved
- [ 0.124995] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.125009] pnp 00:04: [dma 4]
- [ 0.125011] pnp 00:04: [io 0x0000-0x000f]
- [ 0.125014] pnp 00:04: [io 0x0080-0x0090]
- [ 0.125016] pnp 00:04: [io 0x0094-0x009f]
- [ 0.125018] pnp 00:04: [io 0x00c0-0x00df]
- [ 0.125043] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.125053] pnp 00:05: [io 0x0070-0x0073]
- [ 0.125070] pnp 00:05: [irq 8]
- [ 0.125098] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.125107] pnp 00:06: [io 0x0061]
- [ 0.125134] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.125143] pnp 00:07: [io 0x00f0-0x00ff]
- [ 0.125149] pnp 00:07: [irq 13]
- [ 0.125180] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.125406] pnp 00:08: [io 0x03f8-0x03ff]
- [ 0.125412] pnp 00:08: [irq 4]
- [ 0.125473] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.125643] pnp 00:09: [io 0x02f8-0x02ff]
- [ 0.125649] pnp 00:09: [irq 3]
- [ 0.125698] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.125925] pnp 00:0a: [io 0x0378-0x037f]
- [ 0.125931] pnp 00:0a: [irq 7]
- [ 0.125986] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
- [ 0.126072] pnp 00:0b: [io 0x0060]
- [ 0.126075] pnp 00:0b: [io 0x0064]
- [ 0.126080] pnp 00:0b: [irq 1]
- [ 0.126108] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.126321] pnp 00:0c: [io 0x0201]
- [ 0.126358] pnp 00:0c: Plug and Play ACPI device, IDs PNPb02f (active)
- [ 0.126365] pnp: PnP ACPI: found 13 devices
- [ 0.126366] ACPI: ACPI bus type pnp unregistered
- [ 0.132554] Switching to clocksource acpi_pm
- [ 0.132627] pci 0000:00:0a.0: BAR 6: assigned [mem 0x80000000-0x8000ffff pref]
- [ 0.132634] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref]
- [ 0.132638] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.132642] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
- [ 0.132647] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe1ffffff]
- [ 0.132650] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
- [ 0.132664] pci 0000:00:01.0: setting latency timer to 64
- [ 0.132669] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
- [ 0.132671] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
- [ 0.132674] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff]
- [ 0.132676] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
- [ 0.132679] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe1ffffff]
- [ 0.132681] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
- [ 0.132741] NET: Registered protocol family 2
- [ 0.132852] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.133794] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- [ 0.137272] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.138246] TCP: Hash tables configured (established 262144 bind 65536)
- [ 0.138249] TCP: reno registered
- [ 0.138260] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.138293] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 0.138429] NET: Registered protocol family 1
- [ 0.138445] pci 0000:00:00.0: MSI quirk detected; MSI disabled
- [ 0.138464] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
- [ 0.138817] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
- [ 0.138819] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
- [ 0.138937] pci 0000:01:00.0: Boot video device
- [ 0.138943] PCI: CLS 32 bytes, default 64
- [ 0.139096] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
- [ 0.150558] Trying to unpack rootfs image as initramfs...
- [ 0.164398] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
- [ 0.164803] audit: initializing netlink socket (disabled)
- [ 0.164822] type=2000 audit(1360794546.164:1): initialized
- [ 0.212596] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.218220] VFS: Disk quotas dquot_6.5.2
- [ 0.218282] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.224379] fuse init (API version 7.19)
- [ 0.224500] msgmni has been set to 3957
- [ 0.236438] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.236475] io scheduler noop registered
- [ 0.236477] io scheduler deadline registered (default)
- [ 0.236509] io scheduler cfq registered
- [ 0.236678] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.236703] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.236845] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.236851] ACPI: Power Button [PWRB]
- [ 0.236906] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.236912] ACPI: Power Button [PWRF]
- [ 0.239798] GHES: HEST is not enabled!
- [ 0.239886] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 0.260241] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.304711] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 0.345522] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.388501] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 0.408387] Linux agpgart interface v0.103
- [ 0.409918] brd: module loaded
- [ 0.410719] loop: module loaded
- [ 0.411181] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
- [ 0.411183] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
- [ 0.411574] Fixed MDIO Bus: probed
- [ 0.411622] tun: Universal TUN/TAP device driver, 1.6
- [ 0.411623] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.411669] PPP generic driver version 2.4.2
- [ 0.411718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.411764] ehci_hcd 0000:00:09.2: EHCI Host Controller
- [ 0.411774] ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 1
- [ 0.411838] ehci_hcd 0000:00:09.2: irq 19, io mem 0xe3001000
- [ 0.420183] ehci_hcd 0000:00:09.2: USB 2.0 started, EHCI 1.00
- [ 0.420245] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.420248] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.420251] usb usb1: Product: EHCI Host Controller
- [ 0.420253] usb usb1: Manufacturer: Linux 3.5.0-23-generic ehci_hcd
- [ 0.420255] usb usb1: SerialNumber: 0000:00:09.2
- [ 0.420407] hub 1-0:1.0: USB hub found
- [ 0.420413] hub 1-0:1.0: 4 ports detected
- [ 0.420549] ehci_hcd 0000:00:10.4: EHCI Host Controller
- [ 0.420557] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 2
- [ 0.420629] ehci_hcd 0000:00:10.4: irq 21, io mem 0xe3003000
- [ 0.432188] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
- [ 0.432259] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.432262] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.432264] usb usb2: Product: EHCI Host Controller
- [ 0.432267] usb usb2: Manufacturer: Linux 3.5.0-23-generic ehci_hcd
- [ 0.432269] usb usb2: SerialNumber: 0000:00:10.4
- [ 0.432431] hub 2-0:1.0: USB hub found
- [ 0.432438] hub 2-0:1.0: 8 ports detected
- [ 0.432555] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.432580] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.432628] uhci_hcd 0000:00:09.0: UHCI Host Controller
- [ 0.432636] uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 3
- [ 0.432693] uhci_hcd 0000:00:09.0: irq 17, io base 0x0000b000
- [ 0.432740] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.432743] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.432745] usb usb3: Product: UHCI Host Controller
- [ 0.432748] usb usb3: Manufacturer: Linux 3.5.0-23-generic uhci_hcd
- [ 0.432750] usb usb3: SerialNumber: 0000:00:09.0
- [ 0.432837] hub 3-0:1.0: USB hub found
- [ 0.432842] hub 3-0:1.0: 2 ports detected
- [ 0.432910] uhci_hcd 0000:00:09.1: UHCI Host Controller
- [ 0.432916] uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 4
- [ 0.432965] uhci_hcd 0000:00:09.1: irq 18, io base 0x0000b400
- [ 0.433006] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.433008] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.433010] usb usb4: Product: UHCI Host Controller
- [ 0.433013] usb usb4: Manufacturer: Linux 3.5.0-23-generic uhci_hcd
- [ 0.433015] usb usb4: SerialNumber: 0000:00:09.1
- [ 0.433096] hub 4-0:1.0: USB hub found
- [ 0.433100] hub 4-0:1.0: 2 ports detected
- [ 0.433173] uhci_hcd 0000:00:10.0: UHCI Host Controller
- [ 0.433179] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
- [ 0.433199] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800
- [ 0.433245] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.433247] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.433250] usb usb5: Product: UHCI Host Controller
- [ 0.433252] usb usb5: Manufacturer: Linux 3.5.0-23-generic uhci_hcd
- [ 0.433254] usb usb5: SerialNumber: 0000:00:10.0
- [ 0.433341] hub 5-0:1.0: USB hub found
- [ 0.433345] hub 5-0:1.0: 2 ports detected
- [ 0.433415] uhci_hcd 0000:00:10.1: UHCI Host Controller
- [ 0.433421] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
- [ 0.433440] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000dc00
- [ 0.433478] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.433481] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.433483] usb usb6: Product: UHCI Host Controller
- [ 0.433486] usb usb6: Manufacturer: Linux 3.5.0-23-generic uhci_hcd
- [ 0.433488] usb usb6: SerialNumber: 0000:00:10.1
- [ 0.433570] hub 6-0:1.0: USB hub found
- [ 0.433574] hub 6-0:1.0: 2 ports detected
- [ 0.433642] uhci_hcd 0000:00:10.2: UHCI Host Controller
- [ 0.433648] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 7
- [ 0.433667] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000
- [ 0.433707] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.433709] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.433712] usb usb7: Product: UHCI Host Controller
- [ 0.433714] usb usb7: Manufacturer: Linux 3.5.0-23-generic uhci_hcd
- [ 0.433716] usb usb7: SerialNumber: 0000:00:10.2
- [ 0.433806] hub 7-0:1.0: USB hub found
- [ 0.433810] hub 7-0:1.0: 2 ports detected
- [ 0.433886] uhci_hcd 0000:00:10.3: UHCI Host Controller
- [ 0.433893] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 8
- [ 0.433912] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400
- [ 0.433953] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.433955] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.433958] usb usb8: Product: UHCI Host Controller
- [ 0.433960] usb usb8: Manufacturer: Linux 3.5.0-23-generic uhci_hcd
- [ 0.433962] usb usb8: SerialNumber: 0000:00:10.3
- [ 0.434049] hub 8-0:1.0: USB hub found
- [ 0.434053] hub 8-0:1.0: 2 ports detected
- [ 0.434183] usbcore: registered new interface driver libusual
- [ 0.434223] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 0.434225] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 0.434411] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.434484] mousedev: PS/2 mouse device common for all mice
- [ 0.434583] rtc_cmos 00:05: RTC can wake from S4
- [ 0.434765] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 0.434817] rtc0: alarms up to one year, y3k, 242 bytes nvram
- [ 0.434918] device-mapper: uevent: version 1.0.3
- [ 0.434985] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 0.434997] cpuidle: using governor ladder
- [ 0.434999] cpuidle: using governor menu
- [ 0.435001] EFI Variables Facility v0.08 2004-May-17
- [ 0.438608] ashmem: initialized
- [ 0.438769] TCP: cubic registered
- [ 0.438902] NET: Registered protocol family 10
- [ 0.439164] NET: Registered protocol family 17
- [ 0.439184] Key type dns_resolver registered
- [ 0.439324] PM: Hibernation image not present or could not be loaded.
- [ 0.439344] registered taskstats version 1
- [ 0.461683] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
- [ 0.732135] usb 1-1: new high-speed USB device number 2 using ehci_hcd
- [ 0.732275] Freeing initrd memory: 21624k freed
- [ 0.755315] Key type trusted registered
- [ 0.758058] Key type encrypted registered
- [ 0.761153] Magic number: 1:213:502
- [ 0.761289] rtc_cmos 00:05: setting system clock to 2013-02-13 22:29:07 UTC (1360794547)
- [ 0.761341] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
- [ 0.761405] powernow-k8: invalid freq entries 2200000 kHz vs. 1833000 kHz
- [ 0.761407] powernow-k8: invalid freq entries 2000000 kHz vs. 1667000 kHz
- [ 0.761408] powernow-k8: invalid freq entries 1800000 kHz vs. 1500000 kHz
- [ 0.761410] powernow-k8: invalid freq entries 1000000 kHz vs. 833000 kHz
- [ 0.761414] [Firmware Bug]: powernow-k8: invalid powernow_table
- [ 0.761459] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.761461] EDD information not available.
- [ 0.763260] Freeing unused kernel memory: 932k freed
- [ 0.763962] Write protecting the kernel read-only data: 12288k
- [ 0.769192] Freeing unused kernel memory: 1464k freed
- [ 0.774377] Freeing unused kernel memory: 1120k freed
- [ 0.804751] udevd[84]: starting version 175
- [ 0.885785] usb 1-1: New USB device found, idVendor=0fe9, idProduct=db98
- [ 0.885792] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
- [ 0.885795] usb 1-1: Product: Bluebird
- [ 0.885797] usb 1-1: Manufacturer: Dvico
- [ 0.885800] usb 1-1: SerialNumber: 000080e2
- [ 0.989883] sata_via 0000:00:0f.0: version 2.6
- [ 0.989949] sata_via 0000:00:0f.0: routed to hard irq line 11
- [ 0.993340] scsi0 : sata_via
- [ 0.995744] scsi1 : sata_via
- [ 0.995843] ata1: SATA max UDMA/133 cmd 0xbc00 ctl 0xc000 bmdma 0xcc00 irq 20
- [ 0.995845] ata2: SATA max UDMA/133 cmd 0xc400 ctl 0xc800 bmdma 0xcc08 irq 20
- [ 0.996066] usb 1-2: new high-speed USB device number 3 using ehci_hcd
- [ 1.016964] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 1.017010] r8169 0000:00:0a.0: PCI: Disallowing DAC for device
- [ 1.017029] r8169 0000:00:0a.0: (unregistered net_device): not PCI Express
- [ 1.017234] r8169 0000:00:0a.0: eth0: RTL8169sb/8110sb at 0xffffc900008b0000, 00:1f:1f:06:d0:b3, XID 10000000 IRQ 18
- [ 1.017237] r8169 0000:00:0a.0: eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
- [ 1.017303] pata_via 0000:00:0f.1: version 0.3.4
- [ 1.019875] scsi2 : pata_via
- [ 1.022042] scsi3 : pata_via
- [ 1.023432] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd400 irq 14
- [ 1.023435] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd408 irq 15
- [ 1.129681] usb 1-2: New USB device found, idVendor=0fe9, idProduct=db98
- [ 1.129688] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
- [ 1.129691] usb 1-2: Product: Bluebird
- [ 1.129693] usb 1-2: Manufacturer: Dvico
- [ 1.129695] usb 1-2: SerialNumber: 000000e2
- [ 1.188017] Refined TSC clocksource calibration: 2210.161 MHz.
- [ 1.188026] Switching to clocksource tsc
- [ 1.196011] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.240548] ata3.00: HPA detected: current 156299375, native 156301488
- [ 1.240553] ata3.00: ATA-6: ST380011A, 3.06, max UDMA/100
- [ 1.240555] ata3.00: 156299375 sectors, multi 16: LBA48
- [ 1.256379] ata3.00: configured for UDMA/100
- [ 1.424010] usb 8-1: new low-speed USB device number 2 using uhci_hcd
- [ 1.592995] usb 8-1: New USB device found, idVendor=04b3, idProduct=310c
- [ 1.592998] usb 8-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
- [ 1.593000] usb 8-1: Product: USB Optical Mouse
- [ 1.651805] ata1.00: ATA-8: WDC WD3200AAVS-00ZTB0, 01.01B01, max UDMA/133
- [ 1.651811] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.660612] ata1.00: configured for UDMA/133
- [ 1.660757] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAVS-0 01.0 PQ: 0 ANSI: 5
- [ 1.661011] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 1.661057] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.661060] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.661080] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.661359] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.668144] sda: sda1
- [ 1.668397] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.864012] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
- [ 1.874759] scsi 2:0:0:0: Direct-Access ATA ST380011A 3.06 PQ: 0 ANSI: 5
- [ 1.874943] sd 2:0:0:0: [sdb] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 1.874984] sd 2:0:0:0: [sdb] Write Protect is off
- [ 1.874987] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.875006] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.875279] sd 2:0:0:0: Attached scsi generic sg1 type 0
- [ 1.914526] sdb: sdb1 sdb2 sdb3 sdb4
- [ 1.914885] sd 2:0:0:0: [sdb] Attached SCSI disk
- [ 2.044366] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4160B, A301, max UDMA/66
- [ 2.044527] ata4.01: HPA detected: current 156299375, native 156301488
- [ 2.044531] ata4.01: ATA-6: ST980815A, 3.ALD, max UDMA/100
- [ 2.044533] ata4.01: 156299375 sectors, multi 16: LBA48
- [ 2.060215] ata4.00: configured for UDMA/66
- [ 2.076323] ata4.01: configured for UDMA/100
- [ 2.081808] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4160B A301 PQ: 0 ANSI: 5
- [ 2.086975] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 2.086978] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 2.087096] sr 3:0:0:0: Attached scsi CD-ROM sr0
- [ 2.087158] sr 3:0:0:0: Attached scsi generic sg2 type 5
- [ 2.087267] scsi 3:0:1:0: Direct-Access ATA ST980815A 3.AL PQ: 0 ANSI: 5
- [ 2.087407] sd 3:0:1:0: [sdc] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 2.087452] sd 3:0:1:0: [sdc] Write Protect is off
- [ 2.087455] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
- [ 2.087475] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.087543] sd 3:0:1:0: Attached scsi generic sg3 type 0
- [ 2.117908] sdc: sdc1 sdc2 sdc3 sdc4
- [ 2.118274] sd 3:0:1:0: [sdc] Attached SCSI disk
- [ 2.141416] usbcore: registered new interface driver usbhid
- [ 2.141421] usbhid: USB HID core driver
- [ 2.153061] input: USB Optical Mouse as /devices/pci0000:00/0000:00:10.3/usb8/8-1/8-1:1.0/input/input3
- [ 2.153984] hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:10.3-1/input0
- [ 4.573125] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
- [ 4.573130] vesafb: scrolling: redraw
- [ 4.573134] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
- [ 4.573520] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000900000, using 5120k, total 5120k
- [ 4.575664] Console: switching to colour frame buffer device 160x64
- [ 4.575700] fb0: VESA VGA frame buffer device
- [ 5.250152] EXT4-fs (sdc4): INFO: recovery required on readonly filesystem
- [ 5.250158] EXT4-fs (sdc4): write access will be enabled during recovery
- [ 5.465584] EXT4-fs (sdc4): recovery complete
- [ 5.476539] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null)
- [ 7.673434] Adding 2001916k swap on /dev/sdb4. Priority:-1 extents:1 across:2001916k
- [ 7.762207] Adding 2104508k swap on /dev/sdc2. Priority:-2 extents:1 across:2104508k
- [ 8.801707] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 8.964448] udevd[376]: starting version 175
- [ 10.398190] lp: driver loaded but no devices found
- [ 10.803769] EXT4-fs (sdc4): re-mounted. Opts: errors=remount-ro
- [ 10.980570] parport_pc 00:0a: reported by Plug and Play ACPI
- [ 10.980624] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
- [ 10.993156] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 11.072445] lp0: using parport0 (interrupt-driven).
- [ 11.252640] gameport gameport0: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 697kHz
- [ 11.285478] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
- [ 11.285484] AMD IOMMUv2 functionality not available on this sytem
- [ 11.563559] MCE: In-kernel MCE decoding enabled.
- [ 11.612632] EDAC MC: Ver: 2.1.0
- [ 11.678418] microcode: AMD CPU family 0xf not supported
- [ 11.690538] ppdev: user-space parallel port driver
- [ 11.750165] AMD64 EDAC driver v3.4.0
- [ 11.750217] EDAC amd64: DRAM ECC disabled.
- [ 11.750221] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- [ 11.750221] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- [ 11.750221] (Note that use of the override may cause unknown side effects.)
- [ 11.811789] Linux video capture interface: v2.00
- [ 13.181243] bttv: driver version 0.9.19 loaded
- [ 13.181251] bttv: using 8 buffers with 2080k (520 pages) each for capture
- [ 13.182317] bttv: Bt8xx card found (0)
- [ 13.182348] bttv: 0: Bt848 (rev 18) at 0000:00:0b.0, irq: 19, latency: 32, mmio: 0xe3002000
- [ 13.182370] bttv: 0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
- [ 13.183103] tveeprom 1-0050: Huh, no eeprom present (err=-6)?
- [ 13.183106] bttv: 0: tuner type unset
- [ 13.183173] bttv: 0: registered device video0
- [ 13.183237] bttv: 0: registered device vbi0
- [ 13.327804] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
- [ 13.327861] snd_hda_intel 0000:01:00.1: PCI: Disallowing DAC for device
- [ 13.432496] dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)' in warm state.
- [ 13.433539] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
- [ 13.463800] DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2))
- [ 13.494590] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input4
- [ 13.562796] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
- [ 13.562801] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
- [ 13.562995] snd_via82xx 0000:00:11.5: setting latency timer to 64
- [ 13.660411] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
- [ 13.719996] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
- [ 13.720020] Disabling lock debugging due to kernel taint
- [ 13.737172] [fglrx] Maximum main memory to use for locked dma buffers: 1877 MBytes.
- [ 13.737317] [fglrx] vendor: 1002 device: 9596 count: 1
- [ 13.737652] [fglrx] ioport: bar 1, base 0xa000, size: 0x100
- [ 13.737718] pci 0000:01:00.0: PCI: Disallowing DAC for device
- [ 13.737917] [fglrx] Kernel PAT support is enabled
- [ 13.737949] [fglrx] module loaded - fglrx 8.97.2 [Nov 16 2012] with 1 minors
- [ 13.878302] DiB0070: successfully identified
- [ 13.880128] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:09.2/usb1/1-1/input/input5
- [ 13.880387] dvb-usb: schedule remote query interval to 100 msecs.
- [ 13.880394] dvb-usb: DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2) successfully initialized and connected.
- [ 13.880427] dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)' in warm state.
- [ 13.880634] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
- [ 13.911718] DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2))
- [ 14.094598] DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
- [ 14.310719] DiB0070: successfully identified
- [ 14.311417] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:09.2/usb1/1-2/input/input6
- [ 14.312114] dvb-usb: schedule remote query interval to 100 msecs.
- [ 14.312119] dvb-usb: DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2) successfully initialized and connected.
- [ 14.312231] usbcore: registered new interface driver dvb_usb_cxusb
- [ 14.712303] type=1400 audit(1360754961.447:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=747 comm="apparmor_parser"
- [ 14.712820] type=1400 audit(1360754961.447:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=747 comm="apparmor_parser"
- [ 14.713118] type=1400 audit(1360754961.447:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=747 comm="apparmor_parser"
- [ 14.713868] type=1400 audit(1360754961.447:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=746 comm="apparmor_parser"
- [ 14.714382] type=1400 audit(1360754961.447:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=746 comm="apparmor_parser"
- [ 14.714681] type=1400 audit(1360754961.447:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=746 comm="apparmor_parser"
- [ 15.378522] init: failsafe main process (801) killed by TERM signal
- [ 17.261409] Bluetooth: Core ver 2.16
- [ 17.261498] NET: Registered protocol family 31
- [ 17.261500] Bluetooth: HCI device and connection manager initialized
- [ 17.261854] Bluetooth: HCI socket layer initialized
- [ 17.261857] Bluetooth: L2CAP socket layer initialized
- [ 17.261875] Bluetooth: SCO socket layer initialized
- [ 17.271316] type=1400 audit(1360754964.007:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=903 comm="apparmor_parser"
- [ 17.271745] type=1400 audit(1360754964.007:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=903 comm="apparmor_parser"
- [ 17.275758] type=1400 audit(1360754964.007:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=939 comm="apparmor_parser"
- [ 17.276806] type=1400 audit(1360754964.011:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=939 comm="apparmor_parser"
- [ 17.609389] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 17.609394] Bluetooth: BNEP filters: protocol multicast
- [ 22.871570] r8169 0000:00:0a.0: eth0: link down
- [ 22.871585] r8169 0000:00:0a.0: eth0: link down
- [ 22.872237] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 22.872726] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 24.135881] [fglrx] AGP detected, AgpState = 0x1f000a1b (hardware caps of chipset)
- [ 24.135890] [fglrx] [agp] enabling AGP with mode=0x1f000b1a
- [ 24.135897] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
- [ 24.135911] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
- [ 24.135984] fglrx_pci 0000:01:00.0: putting AGP V3 device into 8x mode
- [ 24.135995] [fglrx] AGP enabled, AgpCommand = 0x1f000312 (selected caps)
- [ 24.162518] [fglrx] Setup AGP aperture
- [ 24.174456] [fglrx] Could not enable MSI; System prevented initialization
- [ 24.175064] [fglrx] Firegl kernel thread PID: 1258
- [ 24.175129] [fglrx] Firegl kernel thread PID: 1259
- [ 24.175192] [fglrx] Firegl kernel thread PID: 1260
- [ 24.175353] [fglrx] IRQ 16 Enabled
- [ 25.634639] r8169 0000:00:0a.0: eth0: link up
- [ 25.634999] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 25.913333] [fglrx] Gart cacheable size:871 M.
- [ 25.913342] [fglrx] Reserved FB block: Shared offset:0, size:1000000
- [ 25.913344] [fglrx] Reserved FB block: Unshared offset:fe0a000, size:1f6000
- [ 25.913346] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement