Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 109.693642] [c0] usb 3-1.2: new high-speed USB device number 3 using xhci-hcd
- [ 110.826347] [c2] RTL871X: module init start
- [ 110.829166] [c2] RTL871X: rtl8812au v4.2.5_10143.20140103_ASUS
- [ 110.834944] [c2] RTL871X: build time: May 13 2016 14:16:26
- [ 110.840649] [c2] RTL871X:
- usb_endpoint_descriptor(0):
- [ 110.846911] [c2] RTL871X: bLength=7
- [ 110.850382] [c2] RTL871X: bDescriptorType=5
- [ 110.854536] [c2] RTL871X: bEndpointAddress=81
- [ 110.858889] [c2] RTL871X: wMaxPacketSize=512
- [ 110.863074] [c2] RTL871X: bInterval=0
- [ 110.866865] [c6] RTL871X: RT_usb_endpoint_is_bulk_in = 1
- [ 110.872081] [c6] RTL871X:
- usb_endpoint_descriptor(1):
- [ 110.878582] [c6] RTL871X: bLength=7
- [ 110.881988] [c6] RTL871X: bDescriptorType=5
- [ 110.886286] [c6] RTL871X: bEndpointAddress=2
- [ 110.890467] [c6] RTL871X: wMaxPacketSize=512
- [ 110.894714] [c6] RTL871X: bInterval=0
- [ 110.898373] [c6] RTL871X: RT_usb_endpoint_is_bulk_out = 2
- [ 110.903737] [c6] RTL871X:
- usb_endpoint_descriptor(2):
- [ 110.910247] [c6] RTL871X: bLength=7
- [ 110.913719] [c6] RTL871X: bDescriptorType=5
- [ 110.917823] [c6] RTL871X: bEndpointAddress=3
- [ 110.922136] [c6] RTL871X: wMaxPacketSize=512
- [ 110.926387] [c6] RTL871X: bInterval=0
- [ 110.930029] [c6] RTL871X: RT_usb_endpoint_is_bulk_out = 3
- [ 110.935411] [c6] RTL871X:
- usb_endpoint_descriptor(3):
- [ 110.941916] [c6] RTL871X: bLength=7
- [ 110.945386] [c6] RTL871X: bDescriptorType=5
- [ 110.949554] [c6] RTL871X: bEndpointAddress=4
- [ 110.953797] [c6] RTL871X: wMaxPacketSize=512
- [ 110.957996] [c6] RTL871X: bInterval=0
- [ 110.961696] [c6] RTL871X: RT_usb_endpoint_is_bulk_out = 4
- [ 110.967081] [c6] RTL871X:
- usb_endpoint_descriptor(4):
- [ 110.973585] [c6] RTL871X: bLength=7
- [ 110.976998] [c6] RTL871X: bDescriptorType=5
- [ 110.981220] [c6] RTL871X: bEndpointAddress=85
- [ 110.985562] [c6] RTL871X: wMaxPacketSize=64
- [ 110.989724] [c6] RTL871X: bInterval=1
- [ 110.993371] [c6] RTL871X: RT_usb_endpoint_is_int_in = 5, Interval = 1
- [ 110.999789] [c6] RTL871X: nr_endpoint=5, in_num=2, out_num=3
- [ 111.006911] [c6] RTL871X: USB_SPEED_HIGH
- [ 111.010856] [c6] RTL871X: CHIP TYPE: RTL8812
- [ 111.015079] [c6] RTL871X: register rtw_netdev_ops to netdev_ops
- [ 111.021191] [c6] RTL871X: ReadChipVersion8812A SYS_CFG(0xF0)=0x04411135
- [ 111.027726] [c6] RTL871X: Chip Version Info: CHIP_8812_Normal_Chip_TSMC_C_CUT_2T2R_RomVer(0)
- [ 111.036063] [c6] RTL871X: RF_Type is 2!!
- [ 111.039966] [c6] RTL871X: _ConfigChipOutEP_8812 OutEpQueueSel(0x07), OutEpNumber(3)
- [ 111.047684] [c6] RTL871X: ====> ReadAdapterInfo8812AU
- [ 111.052800] [c6] RTL871X: Boot from EFUSE, Autoload OK !
- [ 111.229850] [c6] RTL871X: EEPROM ID=0x8129
- [ 111.232467] [c6] RTL871X: VID = 0x2357, PID = 0x0101
- [ 111.237455] [c6] RTL871X: Customer ID: 0x00, SubCustomer ID: 0xCD
- [ 111.243532] [c6] RTL871X: hal_ReadMACAddress_8812AU MAC Address from EFUSE = ec:08:6b:08:76:48
- [ 111.252141] [c6] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found
- [ 111.260642] [c6] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found
- [ 111.269146] [c6] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found
- [ 111.277647] [c6] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found
- [ 111.286148] [c6] RTL871X: EEPROMRegulatory = 0x1 TxPwrCalibrateRate=0x0
- [ 111.292742] [c6] RTL871X: Board Type: 0x 0
- [ 111.296818] [c6] RTL871X: mlmepriv.ChannelPlan = 0x7f
- [ 111.301854] [c6] RTL871X: CrystalCap: 0x1b
- [ 111.305933] [c6] RTL871X: ThermalMeter = 0x1c
- [ 111.310266] [c6] RTL871X: SWAS: bHwAntDiv = 0, TRxAntDivType = 3
- [ 111.316259] [c6] RTL871X: pHalData->PAType_2G is 0x3, pHalData->ExternalPA_2G = 0
- [ 111.323717] [c6] RTL871X: pHalData->PAType_5G is 0x3, pHalData->ExternalPA_5G = 1
- [ 111.331179] [c6] RTL871X: pHalData->LNAType_2G is 0x0, pHalData->ExternalLNA_2G = 0
- [ 111.338818] [c6] RTL871X: pHalData->LNAType_5G is 0x88, pHalData->ExternalLNA_5G = 1
- [ 111.346541] [c6] RTL871X: pHalData->TypeGPA = 0x0
- [ 111.351224] [c6] RTL871X: pHalData->TypeAPA = 0x0
- [ 111.355906] [c6] RTL871X: pHalData->TypeGLNA = 0x0
- [ 111.360677] [c6] RTL871X: pHalData->TypeALNA = 0x0
- [ 111.365456] [c6] RTL871X: RFE Type: 0x 0
- [ 111.369357] [c6] RTL871X: PID= 0x101, VID= 2357
- [ 111.373966] [c6] RTL871X: PID= 0x101, VID= 2357
- [ 111.378554] [c6] RTL871X: Customer ID: 0x 0
- [ 111.384668] [c6] RTL871X: ReadAdapterInfo8812AU <====
- [ 111.388429] [c6] RTL871X: init_channel_set ChannelPlan ID 7f Chan num:38
- [ 111.395673] [c6] RTL871X: can't get autopm:
- [ 111.399410] [c6] RTL871X: rtw_macaddr_cfg MAC Address = ec:08:6b:08:76:48
- [ 111.406262] [c6] RTL871X: bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
- [ 111.414515] [c6] RTL871X: rtw_ndev_init(wlan0)
- [ 111.419989] [c6] RTL871X: _rtw_drv_register_netdev, MAC Address (if1) = ec:08:6b:08:76:48
- [ 111.427194] [c6] usbcore: registered new interface driver rtl8812au
- [ 111.433340] [c6] RTL871X: module init ret=0
- [ 111.466988] [c3] RTL871X: LeaveAllPowerSaveMode(wlan0): bup=0 Skip!
- [ 111.471919] [c3] RTL871X: rtw_wx_set_scan: bDriverStopped=1, bup=0, hw_init_completed=0
- [ 111.488587] [c3] RTL871X: +871x_drv - drv_open, bup=0
- [ 111.492351] [c0] RTL871X: power-on :REG_SYS_CLKR 0x09=0xb0. REG_CR 0x100=0xea.
- [ 111.499691] [c0] RTL871X: MAC has not been powered on yet.
- [ 111.507271] [c0] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
- [ 111.543901] [c0] RTL871X: FirmwareDownload8812 fw source from Header
- [ 111.548882] [c0] RTL871X: FirmwareDownload8812 fw:NIC, size: 32060
- [ 111.555030] [c0] RTL871X: FirmwareDownload8812: fw_ver=25 fw_subver=0 sig=0x9501
- [ 111.595599] [c6] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00070705
- [ 111.604041] [c6] RTL871X: =====> _8051Reset8812(): 8051 reset success .
- [ 111.634773] [c6] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (309, 30ms), REG_MCUFWDL:0x000707c6
- [ 111.642382] [c6] RTL871X: FWDL success. write_fw:1, 80ms
- [ 111.647693] [c6] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
- [ 111.669316] [c6] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 1
- [ 111.675169] [c6] RTL871X: PHY_ConfigRFWithPowerLimitTableParaFile(): No File rtl8812A/TXPWR_LMT.txt, Load from HWImg Array!
- [ 111.700026] [c6] RTL871X: phy_ConfigBBWithPgParaFile(): No File rtl8812A/PHY_REG_PG.txt, Load from HWImg Array!
- [ 111.988292] [c0] RTL871X: pDM_Odm TxPowerTrackControl = 1
- [ 111.993217] [c0] RTL871X: MAC Address from REG_MACID = ec:08:6b:08:76:48
- [ 111.999055] [c0] RTL871X: rtl8812au_hal_init in 510ms
- [ 112.004337] [c0] RTL871X: hw_var_set_opmode()-5243 mode = 1
- [ 112.009867] [c0] RTL871X: MAC Address = ec:08:6b:08:76:48
- [ 112.015357] [c2] RTL871X: -871x_drv - drv_open, bup=1
- [ 112.020295] [c2] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 112.109031] [c0] RTL871X: [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
- [ 112.113591] [c0] RTL871X: set_mode = IW_MODE_INFRA
- [ 112.119110] [c1] RTL871X: hw_var_set_opmode()-5243 mode = 2
- [ 112.119731] [c0] RTL871X: set bssid:00:00:00:00:00:00
- [ 112.120013] [c0] RTL871X: =>rtw_wx_set_essid
- [ 112.120021] [c0] RTL871X: ssid=g\xffffffc6isQ\xffffffffJ\xffffffec)ͺ\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9fɚ, len=32
- [ 112.120034] [c0] RTL871X: set ssid [g\xffffffc6isQ\xffffffffJ\xffffffec)ͺ\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9fɚ\xffffffcco\xffffffbf\xffffff98\xffffffebی\xffffff90o\xffffffc0\xffffff8b] fw_state=0x00000008
- [ 112.120040] [c0] RTL871X: Set SSID under fw_state=0x00000008
- [ 112.120312] [c0] RTL871X: <=rtw_wx_set_essid, ret 0
- [ 112.208761] [c0] RTL871X: [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
- [ 116.934784] [c0] RTL871X: survey done event(19) band:0 for wlan0
- [ 116.939411] [c0] RTL871X: rtw_select_and_join_from_scanned_queue: return _FAIL(candidate == NULL)
- [ 116.948268] [c0] RTL871X: try_to_join, but select scanning queue fail, to_roam:0
- [ 116.955608] [c0] RTL871X: indicate disassoc
- [ 116.960554] [c0] RTL871X: rtw_indicate_scan_done(wlan0)
- [ 116.965316] [c0] RTL871X: rtl8812_set_FwJoinBssReport_cmd mstatus(0)
- [ 116.971378] [c0] RTL871X: beamforming_deinit_entry Idx 0
- [ 116.976626] [c0] RTL871X: beamforming_notify BeamformState 0 bSounding 0
- [ 116.986911] [c5] RTL871X: ==>rtw_ps_processor .fw_state(8)
- [ 116.991002] [c5] RTL871X: ==>ips_enter cnts:1
- [ 116.995313] [c5] RTL871X: nolinked power save enter
- [ 117.000175] [c5] RTL871X: ===> rtw_ips_pwr_down...................
- [ 117.006341] [c5] RTL871X: ====> rtw_ips_dev_unload...
- [ 117.022307] [c5] RTL871X: usb_read_port_cancel
- [ 117.025403] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- [ 117.036384] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- [ 117.047438] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- [ 117.058471] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- [ 117.069449] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- [ 117.070448] [c6] RTL871X: wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
- [ 117.070457] [c6] RTL871X: _rtw_pwr_wakeup wait ps_processing...
- [ 117.092432] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- [ 117.103438] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- [ 117.114488] [c0] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0) bReadPortCancel(1)
- [ 117.125428] [c3] RTL871X: usb_write_port_cancel
- [ 117.130178] [c3] RTL871X: ==> rtl8812au_hal_deinit
- [ 117.135390] [c0] RTL871X: hal_poweroff_8812au
- [ 117.141457] [c0] RTL871X: =====> _8051Reset8812(): 8051 reset success .
- [ 117.149896] [c0] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
- [ 117.154235] [c0] RTL871X: <=== rtw_ips_pwr_down..................... in 155ms
- [ 117.173352] [c2] RTL871X: _rtw_pwr_wakeup wait ps_processing done
- [ 117.177977] [c2] RTL871X: _rtw_pwr_wakeup call ips_leave....
- [ 117.183693] [c2] RTL871X: ==>ips_leave cnts:1
- [ 117.188376] [c2] RTL871X: ===> rtw_ips_pwr_up..............
- [ 117.193693] [c2] RTL871X: ===> ips_netdrv_open.........
- [ 117.199045] [c0] RTL871X: power-on :REG_SYS_CLKR 0x09=0xb0. REG_CR 0x100=0xea.
- [ 117.206238] [c0] RTL871X: MAC has not been powered on yet.
- [ 117.215192] [c0] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
- [ 117.255116] [c0] RTL871X: FirmwareDownload8812 fw source from Header
- [ 117.260104] [c0] RTL871X: FirmwareDownload8812 fw:NIC, size: 32060
- [ 117.266272] [c0] RTL871X: FirmwareDownload8812: fw_ver=25 fw_subver=0 sig=0x9501
- [ 117.307147] [c5] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00070705
- [ 117.315608] [c5] RTL871X: =====> _8051Reset8812(): 8051 reset success .
- [ 117.346297] [c5] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (313, 30ms), REG_MCUFWDL:0x000707c6
- [ 117.353901] [c5] RTL871X: FWDL success. write_fw:1, 80ms
- [ 117.359215] [c5] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
- [ 117.380990] [c5] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 1
- [ 117.386832] [c5] RTL871X: PHY_ConfigRFWithPowerLimitTableParaFile(): No File rtl8812A/TXPWR_LMT.txt, Load from HWImg Array!
- [ 117.411782] [c5] RTL871X: phy_ConfigBBWithPgParaFile(): No File rtl8812A/PHY_REG_PG.txt, Load from HWImg Array!
- [ 117.696069] [c0] RTL871X: pDM_Odm TxPowerTrackControl = 1
- [ 117.701650] [c1] RTL871X: MAC Address from REG_MACID = ec:08:6b:08:76:48
- [ 117.707035] [c1] RTL871X: rtl8812au_hal_init in 505ms
- [ 117.712269] [c0] RTL871X: hw_var_set_opmode()-5243 mode = 1
- [ 117.717970] [c0] RTL871X: <=== rtw_ips_pwr_up.............. in 525ms
- [ 117.724043] [c0] RTL871X: nolinked power save leave
- [ 117.728924] [c0] RTL871X: ==> ips_leave.....LED(0x00022828)...
- [ 117.734644] [c0] RTL871X: set_mode = IW_MODE_INFRA
- [ 117.739574] [c4] RTL871X:
- wpa_ie(length:22):
- [ 117.740027] [c0] RTL871X: hw_var_set_opmode()-5243 mode = 2
- [ 117.750809] [c4] RTL871X: 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x02
- [ 117.756919] [c4] RTL871X: 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
- [ 117.763113] [c4] RTL871X: 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
- [ 117.769646] [c4] RTL871X: SetHwReg8812A, 5992, RCR= f40060ca
- [ 117.775020] [c4] RTL871X: =>rtw_wx_set_essid
- [ 117.779126] [c4] RTL871X: ssid=blub, len=4
- [ 117.783157] [c4] RTL871X: set ssid [blub] fw_state=0x00000008
- [ 117.788931] [c4] RTL871X: Set SSID under fw_state=0x00000008
- [ 117.794555] [c4] RTL871X: [by_bssid:0][assoc_ssid:blub][to_roam:0] new candidate: blub(14:91:82:2e:1d:3e, ch6) rssi:-70
- [ 117.805314] [c4] RTL871X: rtw_select_and_join_from_scanned_queue: candidate: blub(14:91:82:2e:1d:3e, ch:6)
- [ 117.814948] [c4] RTL871X: [HT] Support LDPC = 0x03
- [ 117.819714] [c4] RTL871X: [HT] Support STBC = 0x01
- [ 117.824485] [c4] RTL871X: [HT] Support Beamformee
- [ 117.829171] [c4] RTL871X: declare supporting RX STBC
- [ 117.834118] [c4] RTL871X: [VHT] Support LDPC = 0x03
- [ 117.838975] [c4] RTL871X: [VHT] Support STBC = 0x03
- [ 117.843832] [c4] RTL871X: [VHT] Support Beamformee
- [ 117.848610] [c4] RTL871X: link to Marvell AP
- [ 117.852883] [c0] RTL871X: start_join_set_ch_bw: ch=6, bwmode=0, ch_offset=0
- [ 117.852888] [c4] RTL871X: <=rtw_wx_set_essid, ret 0
- [ 117.852936] [c4] RTL871X: set bssid:14:91:82:2e:1d:3e
- [ 117.852941] [c4] RTL871X: Set BSSID under fw_state=0x00000088
- [ 117.909281] [c0] RTL871X: == IQK Start ==
- [ 117.976919] [c0] RTL871X: == IQK Finish ==
- [ 117.999174] [c0] RTL871X: OnDeAuth Reason code(1)
- [ 118.002423] [c0] RTL871X: sta recv deauth reason code(1) sta:14:91:82:2e:1d:3e, ignore = 0
- [ 118.010707] [c0] RTL871X: receive_disconnect
- [ 118.014904] [c0] RTL871X: report_join_res(-2)
- [ 118.020264] [c0] RTL871X: =>mlmeext_joinbss_event_callback
- [ 118.024785] [c0] RTL871X: _rtw_join_timeout_handler, fw_state=8
- [ 118.030693] [c0] RTL871X: indicate disassoc
- [ 118.035210] [c0] RTL871X: rtl8812_set_FwJoinBssReport_cmd mstatus(0)
- [ 118.041288] [c0] RTL871X: beamforming_deinit_entry Idx 0
- [ 118.046569] [c0] RTL871X: beamforming_notify BeamformState 0 bSounding 0
- [ 122.934909] [c0] RTL871X: survey done event(1b) band:0 for wlan0
- [ 122.939564] [c0] RTL871X: rtw_indicate_scan_done(wlan0)
- [ 122.947835] [c1] RTL871X: wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
- [ 122.952869] [c1] RTL871X: set_mode = IW_MODE_INFRA
- [ 122.957894] [c1] RTL871X:
- wpa_ie(length:22):
- [ 122.958413] [c3] RTL871X: hw_var_set_opmode()-5243 mode = 2
- [ 122.968683] [c1] RTL871X: 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x02
- [ 122.974830] [c1] RTL871X: 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
- [ 122.980973] [c1] RTL871X: 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
- [ 122.987526] [c0] RTL871X: SetHwReg8812A, 5992, RCR= f40060ca
- [ 122.993332] [c0] RTL871X: =>rtw_wx_set_essid
- [ 122.997020] [c0] RTL871X: ssid=blub, len=4
- [ 123.001142] [c0] RTL871X: set ssid [blub] fw_state=0x00000008
- [ 123.006839] [c0] RTL871X: Set SSID under fw_state=0x00000008
- [ 123.012486] [c0] RTL871X: [by_bssid:0][assoc_ssid:blub][to_roam:0] new candidate: blub(14:91:82:2e:1d:3e, ch6) rssi:-73
- [ 123.023232] [c0] RTL871X: rtw_select_and_join_from_scanned_queue: candidate: blub(14:91:82:2e:1d:3e, ch:6)
- [ 123.032916] [c0] RTL871X: [HT] Support LDPC = 0x03
- [ 123.037645] [c0] RTL871X: [HT] Support STBC = 0x01
- [ 123.042430] [c0] RTL871X: [HT] Support Beamformee
- [ 123.047117] [c0] RTL871X: declare supporting RX STBC
- [ 123.052040] [c0] RTL871X: [VHT] Support LDPC = 0x03
- [ 123.056895] [c0] RTL871X: [VHT] Support STBC = 0x03
- [ 123.061806] [c0] RTL871X: [VHT] Support Beamformee
- [ 123.066528] [c0] RTL871X: link to Marvell AP
- [ 123.070908] [c6] RTL871X: <=rtw_wx_set_essid, ret 0
- [ 123.071001] [c0] RTL871X: start_join_set_ch_bw: ch=6, bwmode=0, ch_offset=0
- [ 123.082644] [c6] RTL871X: set bssid:14:91:82:2e:1d:3e
- [ 123.087615] [c6] RTL871X: Set BSSID under fw_state=0x00000088
- [ 123.113361] [c0] RTL871X: link to Marvell AP
- [ 123.116165] [c0] RTL871X: start auth
- [ 123.119725] [c0] RTL871X: issue_auth
- [ 123.148456] [c0] RTL871X: OnAuthClient
- [ 123.150730] [c0] RTL871X: auth success, start assoc
- [ 123.155632] [c0] RTL871X: network.SupportedRates[0]=82
- [ 123.160717] [c0] RTL871X: network.SupportedRates[1]=84
- [ 123.165824] [c0] RTL871X: network.SupportedRates[2]=8B
- [ 123.171009] [c0] RTL871X: network.SupportedRates[3]=96
- [ 123.176102] [c0] RTL871X: network.SupportedRates[4]=0C
- [ 123.181229] [c0] RTL871X: network.SupportedRates[5]=12
- [ 123.186340] [c0] RTL871X: network.SupportedRates[6]=18
- [ 123.191495] [c0] RTL871X: network.SupportedRates[7]=24
- [ 123.196587] [c0] RTL871X: network.SupportedRates[8]=30
- [ 123.201696] [c0] RTL871X: network.SupportedRates[9]=48
- [ 123.206816] [c0] RTL871X: network.SupportedRates[10]=60
- [ 123.212029] [c0] RTL871X: network.SupportedRates[11]=6C
- [ 123.217296] [c0] RTL871X: bssrate_len = 12
- [ 123.263190] [c0] RTL871X: OnAssocRsp
- [ 123.265358] [c0] RTL871X: Current VHT LDPC Setting = 0A
- [ 123.270500] [c0] RTL871X: Current ShortGI80MHz = 1
- [ 123.275272] [c0] RTL871X: Current VHT STBC Setting = 0A
- [ 123.280517] [c0] RTL871X: Current VHT Beamforming Setting = 01
- [ 123.286325] [c0] RTL871X: report_join_res(2)
- [ 123.290549] [c0] RTL871X: rtw_joinbss_update_network
- [ 123.295506] [c0] RTL871X: +rtw_update_ht_cap()
- [ 123.299956] [c0] RTL871X: rtw_alloc_macid = 0
- [ 123.304253] [c0] RTL871X: rtw_joinbss_update_stainfo
- [ 123.309207] [c0] RTL871X: ### Set STA_(0) info
- [ 123.313645] [c0] RTL871X: assoc success
- [ 123.317901] [c0] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 123.326945] [c0] RTL871X: WMM(0): 0, a425
- [ 123.328542] [c1] RTL871X: send eapol packet
- [ 123.334093] [c0] RTL871X: WMM(1): 0, a449
- [ 123.334310] [c1] RTL871X: send eapol packet
- [ 123.334396] [c1] RTL871X: ~~~~set sta key:unicastkey
- [ 123.334623] [c1] RTL871X: ~~~~set sta key:groupkey
- [ 123.334632] [c1] RTL871X: ==> rtw_set_key algorithm(2),keyid(2),key_mask(0)
- [ 123.359394] [c0] RTL871X: WMM(2): 0, 5e431c
- [ 123.363020] [c0] RTL871X: WMM(3): 0, 2f321c
- [ 123.367224] [c0] RTL871X: wmm_para_seq(0): 0
- [ 123.371368] [c0] RTL871X: wmm_para_seq(1): 1
- [ 123.375648] [c0] RTL871X: wmm_para_seq(2): 2
- [ 123.379905] [c0] RTL871X: wmm_para_seq(3): 3
- [ 123.384191] [c5] RTL871X: HTOnAssocRsp
- [ 123.387914] [c5] RTL871X: VHTOnAssocRsp
- [ 123.391809] [c5] RTL871X: UpdateHalRAMask8812A => mac_id:0, networkType:0x43, mask:0xffffffff
- ==> rssi_level:0, rate_bitmap:0x0fffffff
- [ 123.406410] [c5] RTL871X: [MacId], Set MacId Ctrl(original) = 0x10000
- [ 123.414035] [c5] RTL871X: rtl8812_set_FwJoinBssReport_cmd mstatus(1)
- [ 123.420320] [c5] RTL871X: SetFwRsvdPagePkt_8812: Set RSVD page location to Fw ,TotalPacketLen(2048), TotalPageNum(4)
- [ 123.430529] [c5] RTL871X: wlan0: 1 DL RSVD page success! DLBcnCount:1, poll:1
- [ 123.437405] [c5] RTL871X: Set RSVD page location to Fw.
- [ 123.441910] [c5] RTL871X: Beamforming Config Capability = 0x08
- [ 123.447607] [c5] RTL871X: beamforming_init_entry Idx 0
- [ 123.459523] [c5] RTL871X: beamforming_notify BeamformState 0 bSounding 0
- [ 123.464816] [c5] RTL871X: beamforming_enter Idx 0
- [ 123.469489] [c5] RTL871X: =>mlmeext_joinbss_event_callback
- [ 123.476524] [c5] RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
- [ 123.483720] [c5] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
- [ 123.493900] [c5] RTL871X: SetHwReg8812A, 5985, RCR= f40060ce
- [ 124.956295] [c0] RTL871X: UpdateHalRAMask8812A => mac_id:0, networkType:0x43, mask:0xffffffff
- ==> rssi_level:2, rate_bitmap:0x0fffffff
- [ 135.116783] [c0] RTL871X: == IQK Start ==
- [ 135.202545] [c0] RTL871X: == IQK Finish ==
- [ 139.977659] [c0] RTL871X: survey done event(19) band:0 for wlan0
- [ 139.982471] [c0] RTL871X: rtw_indicate_scan_done(wlan0)
- [ 142.998667] [c0] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
- [ 143.007527] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
- [ 143.878096] [c1] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-LPS_CTRL_LEAVE
- [ 143.885395] [c1] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
- [ 147.008670] [c0] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
- [ 147.015734] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
- [ 147.888617] [c1] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-LPS_CTRL_LEAVE
- [ 147.895849] [c1] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
- [ 151.018658] [c0] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
- [ 151.025814] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
- [ 151.893803] [c1] RTL871X: rtw_set_ps_mode(wlan0) Leave 802.11 power save - WIFI-LPS_CTRL_LEAVE
- [ 151.901038] [c1] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
- [ 153.023664] [c0] RTL871X: rtw_set_ps_mode(wlan0) Enter 802.11 power save - WIFI-TRAFFIC_IDLE
- [ 153.030751] [c0] RTL871X: rtl8812_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement