[    0.000286] Console: colour dummy device 80x30
[    0.000430] console [tty1] enabled
[    0.000450] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=1000)
[    0.000469] pid_max: default: 32768 minimum: 301
[    0.000583] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000598] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001378] Initializing cgroup subsys memory
[    0.001445] CPU: Testing write buffer coherency: ok
[    0.001776] Setting up static identity map for 0x511de0 - 0x511e18
[    0.003383] devtmpfs: initialized
[    0.017164] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    0.019338] xor: measuring software checksum speed
[    0.028567]    arm4regs  :  1248.000 MB/sec
[    0.038610]    8regs     :   604.000 MB/sec
[    0.048675]    32regs    :   604.000 MB/sec
[    0.048687] xor: using function: arm4regs (1248.000 MB/sec)
[    0.049413] NET: Registered protocol family 16
[    0.054769] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.059831] cpuidle: using governor menu
[    0.060625] bcm2708.uart_clock = 3000000
[    0.060661] of_platform_populate failed: -22
[    0.062565] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.062582] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.062614] mailbox: Broadcom VideoCore Mailbox driver
[    0.062688] bcm2708_vcio: mailbox at f200b880
[    0.063051] bcm_power: Broadcom power driver
[    0.063071] bcm_power_open() -> 0
[    0.063079] bcm_power_request(0, 8)
[    0.563714] bcm_mailbox_read -> 00000080, 0
[    0.563728] bcm_power_request -> 0
[    0.563856] Serial: AMBA PL011 UART driver
[    0.563979] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
[    0.612035] raid6: int32x1     62 MB/s
[    0.628929] raid6: int32x2    101 MB/s
[    0.645875] raid6: int32x4    117 MB/s
[    0.662846] raid6: int32x8    125 MB/s
[    0.662861] raid6: using algorithm int32x8 (125 MB/s)
[    0.662870] raid6: using intx1 recovery algorithm
[    0.663532] SCSI subsystem initialized
[    0.663708] usbcore: registered new interface driver usbfs
[    0.663864] usbcore: registered new interface driver hub
[    0.663991] usbcore: registered new device driver usb
[    0.666077] Switched to clocksource stc
[    0.677239] NET: Registered protocol family 2
[    0.678410] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.678488] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.678546] TCP: Hash tables configured (established 4096 bind 4096)
[    0.678618] TCP: reno registered
[    0.678636] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.678660] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.678926] NET: Registered protocol family 1
[    0.679361] RPC: Registered named UNIX socket transport module.
[    0.679381] RPC: Registered udp transport module.
[    0.679389] RPC: Registered tcp transport module.
[    0.679396] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.680819] bcm2708_dma: DMA manager at f2007000
[    0.680949] bcm2708_gpio: bcm2708_gpio_probe c06d3eb0
[    0.681372] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    0.682385] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.689703] zpool: loaded
[    0.689730] zbud: loaded
[    0.690437] VFS: Disk quotas dquot_6.5.2
[    0.690689] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.693255] NFS: Registering the id_resolver key type
[    0.693332] Key type id_resolver registered
[    0.693343] Key type id_legacy registered
[    0.693383] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.694292] msgmni has been set to 746
[    0.696361] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.696406] io scheduler noop registered
[    0.696424] io scheduler deadline registered
[    0.696626] io scheduler cfq registered
[    0.696965] io scheduler bfq registered (default)
[    0.696978] BFQ I/O-scheduler version: v7r7
[    0.698365] BCM2708FB: allocated DMA memory 57400000
[    0.698422] BCM2708FB: allocated DMA channel 0 @ f2007000
[    0.703301] Console: switching to colour frame buffer device 80x30
[    0.707227] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
[    0.707532] uart-pl011 dev:f1: no DMA platform data
[    0.707989] vchiq: vchiq_init_state: slot_zero = 0xd7000000, is_master = 0
[    0.710227] usbcore: registered new interface driver smsc95xx
[    0.710325] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.910450] Core Release: 2.80a
[    0.910478] Setting default values for core params
[    0.910520] Finished setting default values for core params
[    1.110613] Using Buffer DMA mode
[    1.110636] Periodic Transfer Interrupt Enhancement - disabled
[    1.110645] Multiprocessor Interrupt Enhancement - disabled
[    1.110655] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.110669] Dedicated Tx FIFOs mode
[    1.111002] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xd7414000 dma = 0x57414000 len=9024
[    1.111033] FIQ FSM acceleration enabled for :
[    1.111033] Non-periodic Split Transactions
[    1.111033] Periodic Split Transactions
[    1.111033] High-Speed Isochronous Endpoints
[    1.111054] dwc_otg: Microframe scheduler enabled
[    1.111174] WARN::hcd_init_fiq:412: FIQ on core 0 at 0xc03d2208
[    1.111190] WARN::hcd_init_fiq:413: FIQ ASM at 0xc03d2490 length 36
[    1.111217] WARN::hcd_init_fiq:438: MPHI regs_base at 0xd8812000
[    1.111245] dwc_otg bcm2708_usb: DWC OTG Controller
[    1.111294] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    1.111344] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    1.111378] Init: Port Power? op_state=1
[    1.111386] Init: Power Port (0)
[    1.111620] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.111639] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.111651] usb usb1: Product: DWC OTG Controller
[    1.111662] usb usb1: Manufacturer: Linux 3.18.7+ dwc_otg_hcd
[    1.111673] usb usb1: SerialNumber: bcm2708_usb
[    1.112519] hub 1-0:1.0: USB hub found
[    1.112593] hub 1-0:1.0: 1 port detected
[    1.113021] dwc_otg: FIQ enabled
[    1.113037] dwc_otg: NAK holdoff enabled
[    1.113046] dwc_otg: FIQ split-transaction FSM enabled
[    1.113163] Module dwc_common_port init
[    1.113590] usbcore: registered new interface driver usb-storage
[    1.113928] mousedev: PS/2 mouse device common for all mice
[    1.114889] bcm2835-cpufreq: min=700000 max=900000
[    1.115265] sdhci: Secure Digital Host Controller Interface driver
[    1.115282] sdhci: Copyright(c) Pierre Ossman
[    1.115445] DMA channels allocated for the MMC driver
[    1.137122] Load BCM2835 MMC driver
[    1.137529] ledtrig-cpu: registered to indicate activity on CPUs
[    1.139833] hidraw: raw HID events driver (C) Jiri Kosina
[    1.142345] usbcore: registered new interface driver usbhid
[    1.142361] usbhid: USB HID core driver
[    1.142706] NET: Registered protocol family 17
[    1.142919] Key type dns_resolver registered
[    1.144733] zswap: loading zswap
[    1.144754] zpool: creating pool type zbud
[    1.144769] zpool: created zbud pool
[    1.144777] zswap: using zbud pool
[    1.144847] zswap: using lz4 compressor
[    1.147598] Btrfs loaded
[    1.148771] Waiting for root device /dev/mmcblk0p2...
[    1.182506] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.184597] mmc0: new high speed SDHC card at address b368
[    1.185056] mmcblk0: mmc0:b368 SDC   3.74 GiB
[    1.187980]  mmcblk0: p1 p2 p3
[    1.250866] BTRFS: device label xbian-root-btrfs devid 1 transid 265523 /dev/root
[    1.252816] BTRFS info (device mmcblk0p2): enabling auto defrag
[    1.252862] BTRFS info (device mmcblk0p2): disk space caching is enabled
[    1.307823] BTRFS: detected SSD devices, enabling SSD mode
[    1.312252] Indeed it is in host mode hprt0 = 00021501
[    1.333190] VFS: Mounted root (btrfs filesystem) on device 0:12.
[    1.336033] devtmpfs: mounted
[    1.336610] Freeing unused kernel memory: 156K (c06a3000 - c06ca000)
[    1.336625] BFS CPU scheduler v0.460 by Con Kolivas.
[    1.486245] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.486426] Indeed it is in host mode hprt0 = 00001101
[    1.683587] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    1.683633] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.684540] hub 1-1:1.0: USB hub found
[    1.684689] hub 1-1:1.0: 3 ports detected
[    1.959352] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.989361] random: init urandom read with 96 bits of entropy available
[    2.043597] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.043626] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.046601] smsc95xx v1.0.4
[    2.091880] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5a:6f:f6
[    2.165324] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
[    2.278654] usb 1-1.2: New USB device found, idVendor=2188, idProduct=0ae1
[    2.278682] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.278698] usb 1-1.2: Product:  USB OPTICAL MOUSE
[    2.289419] input:  USB OPTICAL MOUSE as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:2188:0AE1.0001/input/input0
[    2.290167] hid-generic 0003:2188:0AE1.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-bcm2708_usb-1.2/input0
[    3.020178] random: nonblocking pool is initialized
[    6.968230] BTRFS info (device mmcblk0p2): disk space caching is enabled
[   10.365671] init: xbian-failaccess main process (190) killed by TERM signal
[   11.269240] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   12.975267] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[   14.482501] udevd[691]: starting version 175
[   15.571361] snd-hifiberry-dac snd-hifiberry-dac.0: pcm5102a-hifi <-> bcm2708-i2s.0 mapping ok
[   15.831890] i2c /dev entries driver
[   15.861846] bcm2708_i2c_init_pinmode(1,2)
[   15.861868] bcm2708_i2c_init_pinmode(1,3)
[   15.941504] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100000)
[   15.991378] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
[   15.992375] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
[   18.134533] pcm512x 1-004d: Failed to reset device: -5
[   18.134584] pcm512x: probe of 1-004d failed with error -5
[   18.134809] pcm512x 1-004c: Failed to reset device: -5
[   18.134842] pcm512x: probe of 1-004c failed with error -5
[   18.181060] init: failsafe main process (69) killed by TERM signal
[   36.151684] init: wait-for-state (xbmcxbmc-loaded) main process (1126) killed by TERM signal
[   40.677291] Bluetooth: Core ver 2.19
[   40.679398] NET: Registered protocol family 31
[   40.679426] Bluetooth: HCI device and connection manager initialized
[   40.679468] Bluetooth: HCI socket layer initialized
[   40.679489] Bluetooth: L2CAP socket layer initialized
[   40.679507] Bluetooth: SCO socket layer initialized
[   40.760467] Bluetooth: RFCOMM TTY layer initialized
[   40.760529] Bluetooth: RFCOMM socket layer initialized
[   40.760542] Bluetooth: RFCOMM ver 1.11
[   44.381727] init: xbmc-failed-start main process (534) killed by TERM signal
[   44.486213] init: wait-for-state (zram-swapxbmc-done) main process (1027) killed by TERM signal
[   45.390465] FS-Cache: Loaded
[   45.593180] FS-Cache: Netfs 'cifs' registered for caching
[   45.599760] Key type cifs.idmap registered
[   47.721368] Adding 250876k swap on /dev/mmcblk0p3.  Priority:0 extents:1 across:250876k SSFS
[  147.397294] ip_tables: (C) 2000-2006 Netfilter Core Team