Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- DX1DQSTR:3DB04001
- DX2DQSTR:3DB04001
- DX3DQSTR:3DB04001
- acc
- ok
- bus width=32 col=10 bank=8 row=15 CS=1
- size=1024MB
- ok OUT
- BUILD=====4
- Set g_BootRockusb=TRUE
- GetRemapTbl flag = 0
- OK! 55473
- unsigned!
- SecureBootEn = 0
- Boot ver: 2012-11-13#1.20
- Start RockUsb...
- GetRemapTbl flag = 1
- 3012045 UsbConnected
- DDR Version 1.00 20120529
- In
- DDR3
- freq
- 300MHz
- config state
- pctl
- phy
- mem
- DX0DQSTR:3DB04001
- DX1DQSTR:3DB04001
- DX2DQSTR:3DB04001
- DX3DQSTR:3DB04001
- acc
- ok
- bus width=32 col=10 bank=8 row=15 CS=1
- size=1024MB
- ok OUT
- BUILD=====4
- GetRemapTbl flag = 0
- OK! 55396
- unsigned!
- SecureBootEn = 0
- Boot ver: 2012-11-13#1.20
- BackupParameter 0
- start_linux=====71376
- 1547344 Starting kernel...@0x60408000
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.0.8+ (EM3066-101C@V03) (gcc version 4.4.3 (GCC) ) #388 SMP PREEMPT Mon Mar 25 18:08:32 CST 2013
- [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: RK30board
- [ 0.000000] memory reserve: Memory(base:0x91800000 size:80M) reserved for <ion>
- [ 0.000000] memory reserve: Memory(base:0x90c00000 size:12M) reserved for <fb0>
- [ 0.000000] memory reserve: Memory(base:0x90000000 size:12M) reserved for <ipp buf>
- [ 0.000000] memory reserve: Memory(base:0x8f400000 size:12M) reserved for <fb2>
- [ 0.000000] memory reserve: Memory(base:0x8ee00000 size:6M) reserved for <camera_ipp_mem>
- [ 0.000000] memory reserve: Total reserved 122M
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] bootconsole [earlycon0] enabled
- [ 0.000000] CPU SRAM: copied sram code from c0b16000 to fef00100 - fef01ad0
- [ 0.000000] CPU SRAM: copied sram data from c0b179d0 to fef03000 - fef0382c
- [ 0.000000] L310 cache controller enabled
- [ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
- [ 0.000000] DDR DEBUG: version 1.00 20121016
- [ 0.000000] DDR DEBUG: DDR3 Device
- [ 0.000000] DDR DEBUG: 1 CS, ROW=15, Bank=8, COL=10, Total Capability=1024MB
- [ 0.000000] DDR DEBUG: init success!!! freq=372MHz
- [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
- [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x5, DGSL=1 extra clock, DGPS=180
- [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x5, DGSL=1 extra clock, DGPS=180
- [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
- [ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
- [ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
- [ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
- [ 0.000000] rk30_iomux_init
- [ 0.000000] Boot mode: 6 flag: 0xc3524200
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @c1da4000 s7072 r8192 d13408 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 228864
- [ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00220000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00008000@0x00010000(recovery),0x000C0000@0x00018000(backup),0x00040000@0x000D8000(cache),0x00208000@0x00118000(userdata),0x00002000@0x00320000(kpanic),0x00100000@0x00322000(system),-@0x00422000(user) bootver=2012-11-13#1.20 firmware_ver=4.1.1
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 750MB 152MB = 902MB total
- [ 0.000000] Memory: 894360k/894360k available, 154216k reserved, 155648K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- [ 0.000000] vmalloc : 0xf7000000 - 0xfe800000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf6800000 ( 872 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .init : 0xc0408000 - 0xc0528000 (1152 kB)
- [ 0.000000] .text : 0xc0528000 - 0xc0ab51d4 (5685 kB)
- [ 0.000000] .data : 0xc0ab6000 - 0xc0b15f00 ( 384 kB)
- [ 0.000000] .bss : 0xc0b19024 - 0xc159b2f8 (10761 kB)
- [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:416
- [ 0.000000] rk30_gpio_init: 176 gpio irqs in 6 banks
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.004897] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
- [ 0.013809] pid_max: default: 32768 minimum: 301
- [ 0.019066] Mount-cache hash table entries: 512
- [ 0.024548] Initializing cgroup subsys debug
- [ 0.029207] Initializing cgroup subsys cpuacct
- [ 0.034090] Initializing cgroup subsys freezer
- [ 0.038904] CPU: Testing write buffer coherency: ok
- [ 0.144833] CPU1: Booted secondary processor
- [ 0.144873] Brought up 2 C
- [ 3.147763] buf[0]=40 buf[1]=40
- [ 3.147906] input: eboda Touchscreen as /devices/virtual/input/input2
- [ 3.148192] Freeing init memory: 1152K
- [ 3.160792] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- [ 3.191871] keychord: using input dev rk29-keypad for fevent
- [ 3.192058] init: cannot open '/initlogo.rle'
- [ 3.248789] gp_rknand_info = : 0xeeadb000
- [ 3.248948] request IRQ_NANDC irq , ret=0.........
- [ 3.249016] FlashCopyProgBuf1=0xc143f000
- [ 3.249041] ATime: 40 ns AHB: 148 timming: 1081
- [ 3.249053] No.1 FLASH INFO:98 de 84 93 72
- [ 3.249066] No.3 FLASH INFO:98 de 84 93 72
- [ 3.249383] ATime: 32 ns AHB: 148 timming: 1061
- [ 3.249543] ATime: 32 ns AHB: 148 timming: 1061
- [ 3.249550] randomizer = 2 , EccBits = 28 pSpec->pReadRetrial = bf00b498
- [ 3.272118] GetRemapTbl...done
- [ 5.178252] FTL INFO:Version = 438,Date = 20121130
- [ 5.178261] totalLogicBlkRaw = 3929
- [ 5.178273] gBootMedia = 1 gSdmmcFwPartOffset =0!
- [ 5.178281] rknand_buffer.c version: 4.38 20121130!
- [ 5.178430] 10 cmdlinepart partitions found on MTD device rk29xxnand
- [ 5.178442] Creating 10 MTD partitions on "rk29xxnand":
- [ 5.178453] 0x000000400000-0x000000800000 : "misc"
- [ 5.179435] 0x000000800000-0x000001000000 : "kernel"
- [ 5.180098] 0x000001000000-0x000002000000 : "boot"
- [ 5.180671] 0x000002000000-0x000003000000 : "recovery"
- [ 5.181135] 0x000003000000-0x00001b000000 : "backup"
- [ 5.181830] 0x00001b000000-0x000023000000 : "cache"
- [ 5.182350] 0x000023000000-0x000064000000 : "userdata"
- [ 5.183537] 0x000064000000-0x000064400000 : "kpanic"
- [ 5.185368] apanic: Bound to mtd partition 'kpanic'
- [ 5.185377] apanic: No panic data available
- [ 5.185391] 0x000064400000-0x000084400000 : "system"
- [ 5.186234] 0x000084400000-0x0003d6400000 : "user"
- [ 5.196903] startBlk = 125 sysProtAddr = 124
- [ 5.289778] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- [ 5.353643] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- [ 5.372178] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- [ 5.400917] UMP: UMP device driver loaded
- [ 5.446071] Mali: init_mali_clock mali_clock c0ad3900
- [ 5.452781] Mali: Mali device driver loaded
- [ 5.457317] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
- [ 5.467471] ipp irq 47
- [ 5.470147] IPP init, version rk30-ipp 1.001
- [ 5.512686] mirroring: Unknown symbol video_data_to_mirroring (err 0)
- [ 5.519192] mirroring: Unknown symbol audio_data_to_mirroring (err 0)
- [ 5.525679] mirroring: Unknown symbol get_fb_layer_id (err 0)
- [ 6.280958] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
- [ 6.309040] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
- [ 6.318854] init: cannot find '/system/bin/drmservice', disabling 'drmservice'
- [ 6.327724] vpu: power on
- [ 6.327794] VPU_SERVICE: checking hw id 4831
- [ 6.328442] vpu: power off...done
- [ 6.328475] VPU_SERVICE: init success
- [ 6.394897] rk_serial rk_serial.0: baud:9600
- [ 6.394926] serial.0 timeout:1000000
- [ 6.395602] rk_serial rk_serial.0: baud:9600
- [ 6.395611] serial.0 timeout:1000000
- [ 6.396414] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
- [ 6.397978] android_usb: already disabled
- [ 6.415317] adb_open
- [ 6.557745] .385.. MMC0 receive the message sd-No-Media from VOLD.[sd_mmc]
- [ 6.566575] .416.. MMC0 receive the message No-Media from VOLD. waitTimes=0 [sd_mmc]
- [ 6.579476] .385.. MMC0 receive the message sd-Pending from VOLD.[sd_mmc]
- [ 6.587121] .385.. MMC0 receive the message sd-Idle-Unmounted from VOLD.[sd_mmc]
- [ 6.616792] Current WiFi chip is RK903.
- shell@android:/ $ [ 9.275279] DWC_OTG: dwc_otg_hcd_connect_detect schedule delaywork
- [ 9.355291] DWC_OTG: dwc_otg_hcd_enable, disable host controller
- [ 9.355319] DWC_OTG: PortPower off
- [ 12.684207] camera 33-0-hm2057_back: RK Camera driver attached to camera0(hm2057_back)
- [ 12.684243]
- [ 12.684245] hm2057..sensor_ioctl..cmd:2
- [ 12.684255]
- [ 12.684257] hm2057..sensor_ioctl..cmd:3
- [ 12.684265] hm2057 sensor_ioctl cmd(0x3) is unknown !
- [ 12.684272] rk_camera_add_device..1007..
- [ 12.684581] camera 33-0-hm2057_back: RK Camera driver detached from camera0(hm2057_back)
- [ 12.684594]
- [ 12.684596] hm2057..sensor_ioctl..cmd:1
- [ 12.684604]
- [ 12.684606] hm2057..sensor_deactivate.. Enter
- [ 12.684615] hm2057 sensor_ioctrl cmd(1) on(1)
- [ 12.684658] camera 33-1-gc0308_front: RK Camera driver attached to camera1(gc0308_front)
- [ 12.684675] gc0308 sensor_ioctl cmd(0x3) is unknown !
- [ 12.684683] rk_camera_add_device..1007..
- [ 12.684956] camera 33-1-gc0308_front: RK Camera driver detached from camera1(gc0308_front)
- [ 14.265552] warning: `zygote' uses 32-bit capabilities (legacy support in use)
- [ 17.115272] DWC_OTG: ********vbus detect*********************************************
- [ 17.314975] DWC_OTG: ********soft connect!!!*****************************************
- [ 17.320983] DWC_OTG: USB SUSPEND
- [ 17.446440] DWC_OTG: USB RESET
- [ 17.533517] android_work: sent uevent USB_STATE=CONNECTED
- [ 17.538042] android_usb gadget: high speed config #1: android
- [ 17.538167] android_work: sent uevent USB_STATE=CONFIGURED
- [ 21.408176] rk29_adc_battery_timer_work old_capacity_mf = 99 && gBatteryData->bat_capacity=97
- [ 21.408195] rk29_adc_battery_timer_work gBatteryData->bat_voltage=4065
- [ 22.266284] mma7660_load_offset: open file /data/mma7660_lastoffset.dat failed
- [ 22.266318] mma7660_load_offset: open file /data/mma7660_lastoffset.dat failed
- [ 22.266328] xoffset = -1, yoffset = -1
- [ 22.375316] [BT_RFKILL]: bt turn on power
- [ 22.473962] Current WiFi chip is RK903.
- [ 22.719239] =======================================================
- [ 22.719259] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
- [ 22.719267] =======================================================
- [ 22.719276] RKWIFI WiFi driver (Powered by Rockchip,Ver 4.25) init.
- [ 22.719287] dhd_module_init: Enter
- [ 22.719295] =========== WLAN placed in POWER ON ========
- [ 22.719351] ANDROID-ERROR) ## wifi_probe
- [ 22.719360] ANDROID-ERROR) wifi_set_power = 1
- [ 22.719369] rk29sdk_wifi_power: 1
- [ 22.890110] acc_open
- [ 22.892481] acc_release
- [ 22.896171] rk_serial rk_serial.0: baud:9600
- [ 22.896185] serial.0 timeout:1000000
- [ 22.896218] rk_serial rk_serial.0: baud:9600
- [ 22.896226] serial.0 timeout:1000000
- [ 22.896248] rk_serial rk_serial.0: baud:115200
- [ 22.896255] serial.0 timeout:1000000
- [ 22.987788] wifi turn on power
- [ 22.987819] ANDROID-ERROR) wifi_set_carddetect = 1
- [ 22.987834] rk29sdk_wifi_set_carddetect:1
- [ 22.987847] mmc1: slot status change detected(0-1)
- [ 22.988726] Linux Kernel SDIO/MMC Driver
- [ 22.988857]
- [ 22.988860] Dongle Host Driver, version 5.90.195.26.1.9
- [ 22.988864] Compiled in drivers/net/wireless/bcmdhd on Sep 28 2012 at 16:18:05
- [ 23.185358]
- [ 23.185361] drivers/mmc/core/core.c...1823.. ===== mmc_rescan Begin....[mmc1]
- [ 23.229335]
- [ 23.229338] mmc_attach_sdio..800.. ===== Begin to identify card as SDIO-card. [mmc1]
- [ 23.315213] rk29_sdmmc_change_clk_div..1741.. newDiv=0, newCLK=24750Khz [sdio]
- [ 23.317452] mmc1: new high speed SDIO card at address 0001
- [ 23.319136] FW_PATH = /system/etc/firmware/fw_RK903.bin
- [ 23.319141] NVRAM_PATH = /system/etc/firmware/nvram_RK903_26M.cal
- [ 23.319242] F1 signature read @0x18000000=0x16044330
- [ 23.359772] DHD: dongle ram size is set to 294912(orig 294912)
- [ 23.359858] dhd_bus_select_firmware_name_by_chip: firmware_path=/system/etc/firmware/fw_RK903b2.bin
- [ 23.377940] wl_create_event_handler thr:1a5 started
- [ 23.385368] wl_iw_attach thr:1a6 started
- [ 23.392404] wl_iw_bt_init thr:1a8 started
- [ 23.399626] dhd_attach thr:1a9 started
- [ 23.405555] dhd_attach thr:1aa started
- [ 23.415625] dhd_attach thr:1ab started
- [ 23.421505] ANDROID-ERROR) wifi_get_mac_addr
- [ 23.425905] Fianl fw_path=/system/etc/firmware/fw_RK903b2.bin
- [ 23.431714] Fianl nv_path=/system/etc/firmware/nvram_RK903_26M.cal
- [ 23.519782] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
- [ 23.696469] ANDROID-ERROR) wifi_get_mac_addr
- [ 23.698033] Firmware up: op_mode=4, Broadcom Dongle Host Driver mac=00:22:f4:9c:46:69
- [ 23.771627] dhd_preinit_ioctls set keeplive failed -1
- [ 23.774572] dhd_rx_frame: net device is NOT registered yet. drop packet
- [ 23.774657] dhd_rx_frame: net device is NOT registered yet. drop packet
- [ 23.775193] Firmware version = wl0: Jul 15 2012 12:54:29 version 5.90.195.26.3 FWID 01-2abc45f3
- [ 23.776161] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:22:f4:9c:46:69
- [ 23.776195] mmc_rescan_try_freq..1674.. ===== Initialize SDIO successfully. [mmc1]
- [ 23.785636] dhd_module_init: Exit
- [ 24.014479]
- [ 24.014488] Dongle Host Driver, version 5.90.195.26.1.9
- [ 24.014496] Compiled in drivers/net/wireless/bcmdhd on Sep 28 2012 at 16:18:05
- [ 27.260832] wl_bss_connect_done succeeded
- [ 27.322340] wl_bss_connect_done succeeded
- [ 27.460942] .385.. MMC0 receive the message sd-Checking from VOLD.[sd_mmc]
- [ 27.508535] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
- [ 27.528778] .385.. MMC0 receive the message sd-Mounted from VOLD.[sd_mmc]
- [ 28.050508] rk_serial rk_serial.0: baud:1500000
- [ 28.050563] serial.0 timeout:1000000
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement