Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- xbmc@AppleTV:~$ dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.24-28-generic (buildd@rothera) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Thu May 27 00:16:49 UTC 2010 (Ubuntu 2.6.24-28.70-generic)
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
- [ 0.000000] BIOS-e820: 000000000008f000 - 0000000000090000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 0000000000090000 - 00000000000a0000 (usable)
- [ 0.000000] BIOS-e820: 00000000000a0000 - 00000000000c0000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000025ae000 (usable)
- [ 0.000000] BIOS-e820: 00000000028eb000 - 000000000293c000 (reserved)
- [ 0.000000] BIOS-e820: 000000000293c000 - 000000000f171000 (usable)
- [ 0.000000] BIOS-e820: 000000000f171000 - 000000000f372000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000000f372000 - 000000000febd000 (usable)
- [ 0.000000] BIOS-e820: 000000000febd000 - 000000000febf000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000000febf000 - 000000000fec0000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000000fec0000 - 000000000feef000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000000feef000 - 000000000fef1000 (usable)
- [ 0.000000] BIOS-e820: 000000000fef1000 - 000000000feff000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000000feff000 - 000000000ff00000 (usable)
- [ 0.000000] BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000f00f8000 - 00000000f00f9000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fffa0000 - 00000000fffd0000 (reserved)
- [ 0.000000] 0MB HIGHMEM available.
- [ 0.000000] 255MB LOWMEM available.
- [ 0.000000] Entering add_active_range(0, 0, 65280) 0 entries of 256 used
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0 -> 4096
- [ 0.000000] Normal 4096 -> 65280
- [ 0.000000] HighMem 65280 -> 65280
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[1] active PFN ranges
- [ 0.000000] 0: 0 -> 65280
- [ 0.000000] On node 0 totalpages: 65280
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
- [ 0.000000] Normal zone: 478 pages used for memmap
- [ 0.000000] Normal zone: 60706 pages, LIFO batch:15
- [ 0.000000] HighMem zone: 0 pages used for memmap
- [ 0.000000] Movable zone: 0 pages used for memmap
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] ACPI: RSDP signature @ 0xC00F8000 checksum 0
- [ 0.000000] ACPI: RSDP 000F8000, 0024 (r2 APPLE )
- [ 0.000000] ACPI: XSDT 0FEFD1C0, 0064 (r1 APPLE Apple00 DA 1000013)
- [ 0.000000] ACPI: FACP 0FEFB000, 00F4 (r3 APPLE Apple00 DA Loki 5F)
- [ 0.000000] ACPI: DSDT 0FEF4000, 2BE5 (r1 APPLE AppleTV 10001 INTL 20050309)
- [ 0.000000] ACPI: FACS 0FEC0000, 0040
- [ 0.000000] ACPI: HPET 0FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
- [ 0.000000] ACPI: APIC 0FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
- [ 0.000000] ACPI: MCFG 0FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
- [ 0.000000] ACPI: ASF! 0FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
- [ 0.000000] ACPI: SSDT 0FEF2000, 01A6 (r1 APPLE Cpu0Ist 3000 INTL 20050309)
- [ 0.000000] ACPI: SSDT 0FEF3000, 0158 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
- [ 0.000000] ACPI: SSDT 0FEF1000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] Processor #0 6:13 APIC version 20
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:e00f8000)
- [ 0.000000] swsusp: Registered nosave memory region: 000000000008f000 - 0000000000090000
- [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000c0000
- [ 0.000000] swsusp: Registered nosave memory region: 00000000000c0000 - 0000000000100000
- [ 0.000000] swsusp: Registered nosave memory region: 00000000025ae000 - 00000000028eb000
- [ 0.000000] swsusp: Registered nosave memory region: 00000000028eb000 - 000000000293c000
- [ 0.000000] swsusp: Registered nosave memory region: 000000000f171000 - 000000000f372000
- [ 0.000000] swsusp: Registered nosave memory region: 000000000febd000 - 000000000febf000
- [ 0.000000] swsusp: Registered nosave memory region: 000000000febf000 - 000000000fec0000
- [ 0.000000] swsusp: Registered nosave memory region: 000000000fec0000 - 000000000feef000
- [ 0.000000] swsusp: Registered nosave memory region: 000000000fef1000 - 000000000feff000
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64770
- [ 0.000000] Kernel command line: root=/dev/sda3 ro vesa video=vesafb xbmc=autostart,nodiskmount,setvolume loglevel=0
- [ 0.000000] mapped APIC to ffffb000 (fee00000)
- [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
- [ 0.000000] Detected 1000.052 MHz processor.
- [ 41.062487] Console: colour dummy device 80x25
- [ 41.062494] console [tty0] enabled
- [ 41.062637] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 41.062786] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 41.072632] Memory: 240892k/261120k available (2182k kernel code, 13564k reserved, 1005k data, 368k init, 0k highmem)
- [ 41.072645] virtual kernel memory layout:
- [ 41.072647] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
- [ 41.072650] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 41.072652] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
- [ 41.072654] lowmem : 0xc0000000 - 0xcff00000 ( 255 MB)
- [ 41.072656] .init : 0xc0423000 - 0xc047f000 ( 368 kB)
- [ 41.072658] .data : 0xc03218ba - 0xc041cdc4 (1005 kB)
- [ 41.072660] .text : 0xc0100000 - 0xc03218ba (2182 kB)
- [ 41.072666] Checking if this processor honours the WP bit even in supervisor mode... Ok.
- [ 41.072721] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
- [ 41.072964] hpet clockevent registered
- [ 41.072973] Calibrating delay loop (skipped), using tsc calculated value.. 2000.10 BogoMIPS (lpj=4000208)
- [ 41.073007] Security Framework initialized
- [ 41.073019] SELinux: Disabled at boot.
- [ 41.073043] AppArmor: AppArmor initialized
- [ 41.073049] Failure registering capabilities with primary security module.
- [ 41.073062] Mount-cache hash table entries: 512
- [ 41.073269] Initializing cgroup subsys ns
- [ 41.073277] Initializing cgroup subsys cpuacct
- [ 41.073294] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
- [ 41.073313] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 41.073317] CPU: L2 cache: 2048K
- [ 41.073323] CPU: After all inits, caps: afe9fbff 00100000 00000000 00042040 00000180 00000000 00000000 00000000
- [ 41.073342] Compat vDSO mapped to ffffe000.
- [ 41.073361] Checking 'hlt' instruction... OK.
- [ 41.089535] SMP alternatives: switching to UP code
- [ 41.092484] Freeing SMP alternatives: 11k freed
- [ 41.092662] Early unpacking initramfs... done
- [ 41.648315] ACPI: Core revision 20070126
- [ 41.648388] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
- [ 41.650949] CPU0: Intel Genuine Intel(R) processor 1.00GHz stepping 08
- [ 41.650979] Total of 1 processors activated (2000.10 BogoMIPS).
- [ 41.651191] ENABLING IO-APIC IRQs
- [ 41.651407] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 41.796350] Brought up 1 CPUs
- [ 41.796382] CPU0 attaching sched-domain:
- [ 41.796387] domain 0: span 01
- [ 41.796390] groups: 01
- [ 41.796627] net_namespace: 64 bytes
- [ 41.796639] Booting paravirtualized kernel on bare hardware
- [ 41.797381] Time: 14:51:27 Date: 09/24/10
- [ 41.797416] NET: Registered protocol family 16
- [ 41.797719] EISA bus registered
- [ 41.797727] ACPI: bus type pci registered
- [ 41.798091] PCI: Using configuration type 1
- [ 41.798109] Setting up standard PCI resources
- [ 41.799508] ACPI: EC: Look up EC in DSDT
- [ 41.801131] ACPI: BIOS _OSI(Linux) query ignored
- [ 41.801135] ACPI: DMI System Vendor: Apple Inc.
- [ 41.801138] ACPI: DMI Product Name: AppleTV1,1
- [ 41.801141] ACPI: DMI Product Version: 1.0
- [ 41.801144] ACPI: DMI Board Name: Mac-F4228DC8
- [ 41.801147] ACPI: DMI BIOS Vendor: Apple Computer, Inc.
- [ 41.801150] ACPI: DMI BIOS Date: 09/25/07
- [ 41.801152] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
- [ 41.801156] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
- [ 41.801451] ACPI: Interpreter enabled
- [ 41.801455] ACPI: (supports S0 S4)
- [ 41.801471] ACPI: Using IOAPIC for interrupt routing
- [ 41.805475] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 41.806140] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
- [ 41.806146] PCI quirk: region 0500-053f claimed by ICH6 GPIO
- [ 41.806906] PCI: Transparent bridge - 0000:00:1e.0
- [ 41.806950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 41.807470] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
- [ 41.807664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
- [ 41.811710] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 41.811841] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 41.811971] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 41.812097] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 41.812222] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 41.812354] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 41.812480] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 41.812604] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 41.812778] Linux Plug and Play Support v0.97 (c) Adam Belay
- [ 41.812825] pnp: PnP ACPI init
- [ 41.812835] ACPI: bus type pnp registered
- [ 41.814556] pnp: PnP ACPI: found 8 devices
- [ 41.814559] ACPI: ACPI bus type pnp unregistered
- [ 41.814565] PnPBIOS: Disabled by ACPI PNP
- [ 41.814900] PCI: Using ACPI for IRQ routing
- [ 41.814905] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
- [ 41.828297] NET: Registered protocol family 8
- [ 41.828301] NET: Registered protocol family 20
- [ 41.828352] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 41.828359] hpet0: 3 64-bit timers, 14318180 Hz
- [ 41.829409] AppArmor: AppArmor Filesystem Enabled
- [ 41.832256] Time: tsc clocksource has been installed.
- [ 41.832276] Switched to high resolution mode on CPU 0
- [ 41.840268] system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
- [ 41.840274] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
- [ 41.840279] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
- [ 41.840284] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
- [ 41.840290] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
- [ 41.840295] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
- [ 41.840306] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
- [ 41.840316] system 00:06: ioport range 0x680-0x6ef has been reserved
- [ 41.840321] system 00:06: ioport range 0x800-0x80f has been reserved
- [ 41.840325] system 00:06: ioport range 0x810-0x817 has been reserved
- [ 41.840330] system 00:06: ioport range 0x400-0x47f has been reserved
- [ 41.840334] system 00:06: ioport range 0x500-0x53f has been reserved
- [ 41.840339] system 00:06: ioport range 0x1640-0x164f has been reserved
- [ 41.870952] PCI: Failed to allocate mem resource #6:20000@20000000 for 0000:01:00.0
- [ 41.870957] PCI: Bridge: 0000:00:01.0
- [ 41.870959] IO window: disabled.
- [ 41.870964] MEM window: 20000000-21ffffff
- [ 41.870969] PREFETCH window: 10000000-1fffffff
- [ 41.870975] PCI: Bridge: 0000:00:1c.0
- [ 41.870977] IO window: disabled.
- [ 41.870985] MEM window: 22000000-224fffff
- [ 41.870990] PREFETCH window: disabled.
- [ 41.870998] PCI: Bridge: 0000:00:1e.0
- [ 41.871002] IO window: 1000-1fff
- [ 41.871010] MEM window: 22500000-225fffff
- [ 41.871016] PREFETCH window: disabled.
- [ 41.871036] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
- [ 41.871044] PCI: Setting latency timer of device 0000:00:01.0 to 64
- [ 41.871075] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
- [ 41.871083] PCI: Setting latency timer of device 0000:00:1c.0 to 64
- [ 41.871100] PCI: Setting latency timer of device 0000:00:1e.0 to 64
- [ 41.871116] NET: Registered protocol family 2
- [ 41.908238] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 41.908545] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 41.908626] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 41.908704] TCP: Hash tables configured (established 8192 bind 8192)
- [ 41.908709] TCP reno registered
- [ 41.920306] checking if image is initramfs... it is
- [ 43.014617] Freeing initrd memory: 7166k freed
- [ 43.015530] audit: initializing netlink socket (disabled)
- [ 43.015553] audit(1285339887.836:1): initialized
- [ 43.018814] VFS: Disk quotas dquot_6.5.1
- [ 43.018941] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 43.019174] io scheduler noop registered
- [ 43.019178] io scheduler anticipatory registered
- [ 43.019181] io scheduler deadline registered
- [ 43.019200] io scheduler cfq registered (default)
- [ 43.019416] PCI: Setting latency timer of device 0000:00:01.0 to 64
- [ 43.019461] assign_interrupt_mode Found MSI capability
- [ 43.019500] Allocate Port Service[0000:00:01.0:pcie00]
- [ 43.019613] PCI: Setting latency timer of device 0000:00:1c.0 to 64
- [ 43.019679] assign_interrupt_mode Found MSI capability
- [ 43.019733] Allocate Port Service[0000:00:1c.0:pcie00]
- [ 43.019794] Allocate Port Service[0000:00:1c.0:pcie02]
- [ 43.020160] isapnp: Scanning for PnP cards...
- [ 43.373959] isapnp: No Plug & Play device found
- [ 43.417330] Real Time Clock Driver v1.12ac
- [ 43.417650] hpet_resources: 0xfed00000 is busy
- [ 43.417681] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
- [ 43.419479] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
- [ 43.419588] input: Macintosh mouse button emulation as /devices/virtual/input/input0
- [ 43.419794] PNP: No PS/2 controller found. Probing ports directly.
- [ 43.420660] i8042.c: No controller found.
- [ 43.422932] mice: PS/2 mouse device common for all mice
- [ 43.423091] EISA: Probing bus 0 at eisa.0
- [ 43.423102] Cannot allocate resource for EISA slot 1
- [ 43.423106] Cannot allocate resource for EISA slot 2
- [ 43.423136] EISA: Detected 0 cards.
- [ 43.423141] cpuidle: using governor ladder
- [ 43.423145] cpuidle: using governor menu
- [ 43.423285] NET: Registered protocol family 1
- [ 43.423328] Using IPI No-Shortcut mode
- [ 43.423377] registered taskstats version 1
- [ 43.423503] Magic number: 10:645:890
- [ 43.423554] hash matches device ptyy0
- [ 43.423602] hash matches device 0000:00:1f.3
- [ 43.423616] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 43.423620] EDD information not available.
- [ 43.423900] Freeing unused kernel memory: 368k freed
- [ 43.423941] Write protecting the kernel read-only data: 803k
- [ 43.533905] vesafb: framebuffer at 0x10028000, mapped to 0xd0880000, using 7200k, total 16384k
- [ 43.533913] vesafb: mode is 1280x720x32, linelength=5120, pages=4096
- [ 43.533916] vesafb: scrolling: redraw
- [ 43.533921] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 43.534099] Console: switching to colour frame buffer device 160x45
- [ 43.617743] fb0: VESA VGA frame buffer device
- [ 43.844409] fuse init (API version 7.9)
- [ 43.867187] ACPI: processor limited to max C-state 2
- [ 43.867460] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
- [ 43.867468] ACPI: Processor [CPU0] (supports 8 throttling states)
- [ 43.867489] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
- [ 44.653589] usbcore: registered new interface driver usbfs
- [ 44.653624] usbcore: registered new interface driver hub
- [ 44.669503] usbcore: registered new device driver usb
- [ 44.693462] USB Universal Host Controller Interface driver v3.0
- [ 44.693550] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18
- [ 44.693566] PCI: Setting latency timer of device 0000:00:1d.0 to 64
- [ 44.693572] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 44.693983] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
- [ 44.694024] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00002020
- [ 44.694228] usb usb1: configuration #1 chosen from 1 choice
- [ 44.694267] hub 1-0:1.0: USB hub found
- [ 44.694276] hub 1-0:1.0: 2 ports detected
- [ 44.785690] SCSI subsystem initialized
- [ 44.798771] PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
- [ 44.798782] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 18
- [ 44.798801] PCI: Setting latency timer of device 0000:00:1d.7 to 64
- [ 44.798807] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 44.798841] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 44.802780] ehci_hcd 0000:00:1d.7: debug port 1
- [ 44.802789] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
- [ 44.802799] ehci_hcd 0000:00:1d.7: irq 18, io mem 0x22605000
- [ 44.817343] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- [ 44.817528] usb usb2: configuration #1 chosen from 1 choice
- [ 44.817569] hub 2-0:1.0: USB hub found
- [ 44.817578] hub 2-0:1.0: 8 ports detected
- [ 44.853344] 8139too Fast Ethernet driver 0.9.28
- [ 44.854926] libata version 3.00 loaded.
- [ 44.921483] PCI: Enabling device 0000:03:03.0 (0000 -> 0003)
- [ 44.921501] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 20 (level, low) -> IRQ 19
- [ 44.921520] PCI: Setting latency timer of device 0000:03:03.0 to 64
- [ 44.922668] eth0: RealTek RTL8139 at 0x1000, 00:17:f2:f9:a3:6c, IRQ 19
- [ 44.922674] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
- [ 44.949213] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- [ 44.958813] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
- [ 44.958865] PCI: Setting latency timer of device 0000:00:1f.1 to 64
- [ 44.958885] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
- [ 44.973438] ata_piix 0000:00:1f.1: version 2.12
- [ 44.973457] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
- [ 44.973501] PCI: Setting latency timer of device 0000:00:1f.1 to 64
- [ 44.981162] scsi0 : ata_piix
- [ 44.981909] scsi1 : ata_piix
- [ 44.982636] ata1: PATA max UDMA/100 cmd 0x2058 ctl 0x2064 bmdma 0x2040 irq 20
- [ 44.982641] ata2: PATA max UDMA/100 cmd 0x2050 ctl 0x2060 bmdma 0x2048 irq 20
- [ 45.157745] ata1.00: ATA-7: FUJITSU MHW2040AT, 0081000C, max UDMA/33
- [ 45.157751] ata1.00: 78140160 sectors, multi 16: LBA48
- [ 45.173624] ata1.00: configured for UDMA/33
- [ 45.340109] usb 2-1: new high speed USB device using ehci_hcd and address 2
- [ 45.340318] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2040A 0081 PQ: 0 ANSI: 5
- [ 45.465595] Driver 'sd' needs updating - please use bus_type methods
- [ 45.465712] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
- [ 45.465732] sd 0:0:0:0: [sda] Write Protect is off
- [ 45.465736] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 45.465762] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 45.465833] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
- [ 45.465849] sd 0:0:0:0: [sda] Write Protect is off
- [ 45.465853] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 45.465879] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 45.465884] sda:<6>usb 2-1: configuration #1 chosen from 1 choice
- [ 45.583809] sda1 sda2 sda3 sda4
- [ 45.583980] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 45.592408] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 45.668620] usbcore: registered new interface driver libusual
- [ 45.675262] Initializing USB Mass Storage driver...
- [ 45.676459] scsi2 : SCSI emulation for USB Mass Storage devices
- [ 45.677099] usbcore: registered new interface driver usb-storage
- [ 45.677106] USB Mass Storage support registered.
- [ 45.677196] usb-storage: device found at 2
- [ 45.677200] usb-storage: waiting for device to settle before scanning
- [ 46.032151] usb 1-2: new low speed USB device using uhci_hcd and address 2
- [ 46.209848] usb 1-2: configuration #1 chosen from 1 choice
- [ 46.259072] usbcore: registered new interface driver hiddev
- [ 46.315702] input: Apple Inc. IR Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input1
- [ 46.315738] input,hidraw0: USB HID v1.11 Device [Apple Inc. IR Receiver] on usb-0000:00:1d.0-2
- [ 46.315757] usbcore: registered new interface driver usbhid
- [ 46.315763] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
- [ 50.671777] usb-storage: device scan complete
- [ 50.672295] scsi 2:0:0:0: Direct-Access itachi HDT721010SLA360 PQ: 0 ANSI: 0 CCS
- [ 50.835426] usb 2-1: reset high speed USB device using ehci_hcd and address 2
- [ 50.984724] sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
- [ 50.985598] sd 2:0:0:0: [sdb] Write Protect is off
- [ 50.985603] sd 2:0:0:0: [sdb] Mode Sense: 34 00 00 00
- [ 50.985607] sd 2:0:0:0: [sdb] Assuming drive cache: write through
- [ 50.986594] sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
- [ 50.987473] sd 2:0:0:0: [sdb] Write Protect is off
- [ 50.987477] sd 2:0:0:0: [sdb] Mode Sense: 34 00 00 00
- [ 50.987481] sd 2:0:0:0: [sdb] Assuming drive cache: write through
- [ 50.987486] sdb: sdb1 sdb2
- [ 51.029663] sd 2:0:0:0: [sdb] Attached SCSI disk
- [ 51.029723] sd 2:0:0:0: Attached scsi generic sg1 type 0
- [ 51.315275] kjournald starting. Commit interval 5 seconds
- [ 51.315293] EXT3-fs: mounted filesystem with ordered data mode.
- [ 56.868054] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 56.977532] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 57.061470] input: PC Speaker as /devices/platform/pcspkr/input/input2
- [ 57.121250] intel_rng: FWH not detected
- [ 57.257292] Linux agpgart interface v0.102
- [ 57.820574] iTCO_vendor_support: vendor-support=0
- [ 57.868526] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
- [ 57.868642] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
- [ 57.868692] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 57.931034] input: Power Button (FF) as /devices/virtual/input/input3
- [ 57.956471] ACPI: Power Button (FF) [PWRF]
- [ 57.956563] input: Power Button (CM) as /devices/virtual/input/input4
- [ 57.984428] ACPI: Power Button (CM) [PWRB]
- [ 58.116405] PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
- [ 58.116419] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
- [ 58.116455] PCI: Setting latency timer of device 0000:00:1b.0 to 64
- [ 58.515925] Loading crystalhd 0.9.27
- [ 58.936035] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
- [ 58.959490] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 59.176823] udev: renamed network interface eth0 to eth1
- [ 59.298939] nvidia: module license 'NVIDIA' taints kernel.
- [ 60.494543] PCI_INFO: Vendor:0x14e4 Device:0x1612 s_vendor:0x14e4 s_device: 0x2612
- [ 60.494582] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
- [ 60.494593] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
- [ 60.494684] allocated 18 elem
- [ 60.494831] Starting BCM70012 Device
- [ 60.733814] clock is moving to 175 with n 35 with vco_mg 2
- [ 60.733839] CStopping BCM70012 Device
- [ 60.957507] PCI: Setting latency timer of device 0000:02:00.0 to 64
- [ 60.957701] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
- [ 60.957714] PCI: Setting latency timer of device 0000:01:00.0 to 64
- [ 60.957889] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
- [ 61.820817] loop: module loaded
- [ 61.910913] lp: driver loaded but no devices found
- [ 62.486325] Adding 976552k swap on /dev/sda4. Priority:-1 extents:1 across:976552k
- [ 62.972820] EXT3 FS on sda3, internal journal
- [ 65.802213] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 67.630888] NET: Registered protocol family 17
- [ 69.273877] No dock devices found.
- [ 71.977238] NET: Registered protocol family 10
- [ 71.977827] lo: Disabled Privacy Extensions
- [ 122.014019] Marking TSC unstable due to: cpufreq changes.
- [ 122.020630] Time: hpet clocksource has been installed.
- [ 122.500476] Clocksource tsc unstable (delta = -194648959 ns)
- [ 126.206465] eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1
- [ 79.312176] NET: Registered protocol family 5
- [ 146.584154] eth1: no IPv6 routers present
- [ 92.587071] Opening new user[0] handle
- [ 92.587079] Starting BCM70012 Device
- [ 92.824978] clock is moving to 175 with n 35 with vco_mg 2
- [ 92.825003] CInitializing Dio pool 10 1024 505c ce5c1ea0
- [ 94.565669] Firmware Downloaded Successfully
- [ 119.087032] DelQAddr:4fed8 RelQAddr:4ffdc
- [ 119.093401] *ERR*:/home/xbmc/install/crystalhd-for-osx-1.0.3/crystalhd/driver/linux/crystalhd_hw.c:2154: Insufficient resources
- [ 254.224035] DelQAddr:4fed8 RelQAddr:4ffdc
- [ 254.224449] *ERR*:/home/xbmc/install/crystalhd-for-osx-1.0.3/crystalhd/driver/linux/crystalhd_hw.c:2154: Insufficient resources
- [ 369.231666] DelQAddr:4fed8 RelQAddr:4ffdc
- [ 369.231925] *ERR*:/home/xbmc/install/crystalhd-for-osx-1.0.3/crystalhd/driver/linux/crystalhd_hw.c:2154: Insufficient resources
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement