API tools faq
paste
Guest User

board_reboot_logs

a guest
Mar 17th, 2017
72
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 44.44 KB | None | 0 0
raw download clone embed print report
  1. root@localhost:~#
  2. Broadcast message from root@localhost.localdomain (Fri 2017-03-17 06:00:43 UTC):
  3.  
  4. reboot scheduled to update the system - temporarily cancel with 'sudo shutdown -c'
  5. The system is going down for reboot NOW!
  6.  
  7. [ 1157.171954] mmc1: Reset 0x1 never completed.
  8. [ 1157.538520] mmc0: Reset 0x1 never completed.
  9. [ 1157.546763] reboot: Restarting system
  10.  
  11. Format: Log Type - Time(microsec) - Message - Optional Info
  12. Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
  13. S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.0-00261
  14. S - IMAGE_VARIANT_STRING=HAAAANAAA
  15. S - OEM_IMAGE_VERSION_STRING=C-BPATTH
  16. S - Boot Config, 0x000002e3
  17. S - Core 0 Frequency, 0 MHz
  18. B - 1544 - PBL, Start
  19. B - 3490 - bootable_media_detect_entry, Start
  20. B - 268380 - bootable_media_detect_success, Start
  21. B - 268385 - elf_loader_entry, Start
  22. B - 270998 - auth_hash_seg_entry, Start
  23. B - 271208 - auth_hash_seg_exit, Start
  24. B - 299719 - elf_segs_hash_verify_entry, Start
  25. B - 358596 - PBL, End
  26. B - 362584 - SBL1, Start
  27. B - 425505 - pm_device_init, Start
  28. D - 14731 - pm_device_init, Delta
  29. B - 440816 - boot_flash_init, Start
  30. D - 0 - boot_flash_init, Delta
  31. B - 444842 - boot_config_data_table_init, Start
  32. D - 359198 - boot_config_data_table_init, Delta - (0 Bytes)
  33. B - 808616 - CDT version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
  34. B - 814807 - sbl1_ddr_set_params, Start
  35. B - 818528 - cpr_init, Start
  36. D - 0 - cpr_init, Delta
  37. B - 824140 - Pre_DDR_clock_init, Start
  38. D - 213 - Pre_DDR_clock_init, Delta
  39. D - 0 - sbl1_ddr_set_params, Delta
  40. B - 836645 - pm_driver_init, Start
  41. D - 6832 - pm_driver_init, Delta
  42. B - 852139 - clock_init, Start
  43. D - 30 - clock_init, Delta
  44. B - 862296 - Image Load, Start
  45. D - 37515 - QSEE Image Loaded, Delta - (460664 Bytes)
  46. B - 899841 - Image Load, Start
  47. D - 396 - SEC Image Loaded, Delta - (2048 Bytes)
  48. B - 907070 - sbl1_efs_handle_cookies, Start
  49. D - 0 - sbl1_efs_handle_cookies, Delta
  50. B - 914878 - Image Load, Start
  51. D - 13664 - QHEE Image Loaded, Delta - (51952 Bytes)
  52. B - 928572 - Image Load, Start
  53. D - 19154 - RPM Image Loaded, Delta - (149492 Bytes)
  54. B - 947757 - Image Load, Start
  55. D - 22997 - APPSBL Image Loaded, Delta - (479072 Bytes)
  56. B - 970784 - QSEE Execution, Start
  57. D - 91 - QSEE Execution, Delta
  58. B - 976488 - SBL1, End
  59. D - 616252 - SBL1, Delta
  60. S - Flash Throughput, 55000 KB/s (1143228 Bytes, 20679 us)
  61. S - DDR Frequency, 400 MHz
  62. Android Bootloader - UART_DM Initialized!!!
  63. [0] welcome to lk
  64.  
  65. [10] platform_init()
  66. [10] target_init()
  67. [20] initialising mmc_slot =2
  68. [20] Error: Command timeout error
  69. [20] Failure getting OCR response from MMC Card
  70. [30] MMC card failed to respond, try for SD card
  71. [90] Done initialization of the card
  72. [90] pm8x41_get_is_cold_boot: cold boot
  73. [90] Not able to search the panel:
  74. [100] Display not enabled for 24 HW type
  75. [100] Target panel init not found!
  76. [100] pm8x41_get_is_cold_boot: cold boot
  77. [110] partition misc doesn't exist
  78. [110] error in emmc_recovery_init
  79. [110] Unable to locate /bootselect partition
  80. [120] No 'misc' partition found
  81. [120] Error reading MISC partition
  82. [120] failed to get ffbm cookie[130] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
  83. [130] Loading boot image (413696): start
  84. [160] Loading boot image (413696): done
  85. [160] DTB Total entry: 15, DTB version: 2
  86. [160] Using DTB entry 0x000000f7/00000000/0x00010018/0 for device 0x000000f7/00010000/0x00010018/0
  87. [170] Using pmic info 0x2000b/0x0/0x0/0x0 for device 0x2000b/0x0/0x0/0x0
  88. [180] cmdline: androidboot.emmc=true androidboot.serialno=dae85161 androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
  89. [190] Updating device tree: start
  90. [240] Updating device tree: done
  91. [340] Error: Command timeout error
  92. [340] card sleep error: mmc_put_card_to_sleep
  93. [340] booting linux @ 0x80080000, ramdisk @ 0x82000000 (0), tags/device tree @ 0x81e00000
  94. [350] Jumping to kernel via monitor
  95.  
  96.  
  97. U-Boot 2016.01-rc1 (Dec 08 2015 - 11:39:05 +0000)
  98. Qualcomm-DragonBoard 410C
  99.  
  100. DRAM: 986 MiB
  101. MMC: msm_sdhci: 0, msm_sdhci: 1
  102. reading uboot.env
  103. In: serial
  104. Out: serial
  105. Err: serial
  106. Net: Net Initialization Skipped
  107. No ethernet found.
  108. Hit any key to stop autoboot: 0
  109. ENVCMD
  110. Saving Environment to FAT...
  111. writing uboot.env
  112. sdhci_send_command: MMC: 1 busy timeout increasing to: 200 ms.
  113. sdhci_send_command: MMC: 1 busy timeout increasing to: 400 ms.
  114. sdhci_send_command: MMC: 1 busy timeout increasing to: 800 ms.
  115. sdhci_send_command: MMC: 1 busy timeout increasing to: 1600 ms.
  116. sdhci_send_command: MMC: 1 busy timeout increasing to: 3200 ms.
  117. sdhci_send_command: MMC: 1 busy timeout.
  118. sdhci_send_command: MMC: 1 busy timeout.
  119. sdhci_send_command: MMC: 1 busy timeout.
  120. sdhci_send_command: MMC: 1 busy timeout.
  121. sdhci_send_command: MMC: 1 busy timeout.
  122. sdhci_send_command: MMC: 1 busy timeout.
  123. sdhci_send_command: MMC: 1 busy timeout.
  124. sdhci_send_command: MMC: 1 busy timeout.
  125. sdhci_send_command: MMC: 1 busy timeout.
  126. sdhci_send_command: MMC: 1 busy timeout.
  127. sdhci_send_command: MMC: 1 busy timeout.
  128. sdhci_send_command: MMC: 1 busy timeout.
  129. sdhci_send_command: MMC: 1 busy timeout.
  130. sdhci_send_command: MMC: 1 busy timeout.
  131. sdhci_send_command: MMC: 1 busy timeout.
  132. sdhci_send_command: MMC: 1 busy timeout.
  133. sdhci_send_command: MMC: 1 busy timeout.
  134. sdhci_send_command: MMC: 1 busy timeout.
  135. sdhci_send_command: MMC: 1 busy timeout.
  136. sdhci_send_command: MMC: 1 busy timeout.
  137. sdhci_send_command: MMC: 1 busy timeout.
  138. sdhci_send_command: MMC: 1 busy timeout.
  139. sdhci_send_command: MMC: 1 busy timeout.
  140. sdhci_send_command: MMC: 1 busy timeout.
  141. sdhci_send_command: MMC: 1 busy timeout.
  142. sdhci_send_command: MMC: 1 busy timeout.
  143. sdhci_send_command: MMC: 1 busy timeout.
  144. FAT: Misaligned buffer address (00000000bd0f2860)
  145. sdhci_send_command: MMC: 1 busy timeout.
  146. sdhci_send_command: MMC: 1 busy timeout.
  147. sdhci_send_command: MMC: 1 busy timeout.
  148. sdhci_send_command: MMC: 1 busy timeout.
  149. sdhci_send_command: MMC: 1 busy timeout.
  150. sdhci_send_command: MMC: 1 busy timeout.
  151. FAT: Misaligned buffer address (00000000bd0f2a60)
  152. sdhci_send_command: MMC: 1 busy timeout.
  153. sdhci_send_command: MMC: 1 busy timeout.
  154. sdhci_send_command: MMC: 1 busy timeout.
  155. sdhci_send_command: MMC: 1 busy timeout.
  156. sdhci_send_command: MMC: 1 busy timeout.
  157. sdhci_send_command: MMC: 1 busy timeout.
  158. done
  159. reading ubuntu-snapdragon-kernel_x1.snap/kernel.img
  160. 22461440 bytes read in 6054 ms (3.5 MiB/s)
  161. reading ubuntu-snapdragon-kernel_x1.snap/dtbs/apq8016-sbc.dtb
  162. 67036 bytes read in 40 ms (1.6 MiB/s)
  163. reading ubuntu-snapdragon-kernel_x1.snap/initrd.img
  164. 4822712 bytes read in 1316 ms (3.5 MiB/s)
  165. ## Flattened Device Tree blob at 83000000
  166. Booting using the fdt blob at 0x83000000
  167. Using Device Tree in place at 0000000083000000, end 00000000830135db
  168.  
  169.  
  170. Starting kernel ...
  171.  
  172. [ 0.000000] Booting Linux on physical CPU 0x0
  173. [ 0.000000] Initializing cgroup subsys cpuset
  174. [ 0.000000] Initializing cgroup subsys cpu
  175. [ 0.000000] Initializing cgroup subsys cpuacct
  176. [ 0.000000] Linux version 4.4.49-xenial_snapdragon+ (root@VM) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #1 SMP F)
  177. [ 0.000000] Boot CPU: AArch64 Processor [410fd030]
  178. [ 0.000000] efi: Getting EFI parameters from FDT:
  179. [ 0.000000] efi: UEFI not found.
  180. [ 0.000000] cma: Reserved 64 MiB at 0x00000000b9000000
  181. [ 0.000000] PERCPU: Embedded 17 pages/cpu @ffffffc03d941000 s31256 r8192 d30184 u69632
  182. [ 0.000000] Detected VIPT I-cache on CPU0
  183. [ 0.000000] CPU features: enabling workaround for ARM errata 826319, 827319, 824069
  184. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  185. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 224784
  186. [ 0.000000] Kernel command line: androidboot.emmc=true androidboot.serialno=dae85161 androidboot.baseband=apq mdss_mdp.panel=0:dsi:0: consp
  187. [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
  188. [ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
  189. [ 0.000000] log_buf_len min size: 16384 bytes
  190. [ 0.000000] log_buf_len: 32768 bytes
  191. [ 0.000000] early log buf free: 14520(88%)
  192. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  193. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  194. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  195. [ 0.000000] software IO TLB [mem 0xb4600000-0xb8600000] (64MB) mapped at [ffffffc034600000-ffffffc0385fffff]
  196. [ 0.000000] Memory: 735588K/913408K available (12948K kernel code, 1711K rwdata, 5968K rodata, 1200K init, 841K bss, 112284K reserved, 6553)
  197. [ 0.000000] Virtual kernel memory layout:
  198. [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
  199. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
  200. [ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc0f68000 ( 15 MB actual)
  201. [ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
  202. [ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
  203. [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  204. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc03da00000 ( 986 MB)
  205. [ 0.000000] .init : 0xffffffc0012fb000 - 0xffffffc001427000 ( 1200 KB)
  206. [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc0012fb000 ( 18924 KB)
  207. [ 0.000000] .data : 0xffffffc001440000 - 0xffffffc0015ebc00 ( 1711 KB)
  208. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  209. [ 0.000000] Hierarchical RCU implementation.
  210. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  211. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
  212. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  213. [ 0.000000]
  214. [ 0.000000] **********************************************************
  215. [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
  216. [ 0.000000] ** **
  217. [ 0.000000] ** trace_printk() being used. Allocating extra memory. **
  218. [ 0.000000] ** **
  219. [ 0.000000] ** This means that this is a DEBUG kernel and it is **
  220. [ 0.000000] ** unsafe for production use. **
  221. [ 0.000000] ** **
  222. [ 0.000000] ** If you see this message and you are not debugging **
  223. [ 0.000000] ** the kernel, report this immediately to your vendor! **
  224. [ 0.000000] ** **
  225. [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
  226. [ 0.000000] **********************************************************
  227. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  228. [ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  229. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  230. [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  231. [ 0.000686] Console: colour dummy device 80x25
  232. [ 0.001774] console [tty0] enabled
  233. [ 0.001814] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
  234. [ 0.001853] pid_max: default: 32768 minimum: 301
  235. [ 0.001952] Security Framework initialized
  236. [ 0.001975] Yama: becoming mindful.
  237. [ 0.002046] AppArmor: AppArmor initialized
  238. [ 0.002220] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  239. [ 0.002247] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  240. [ 0.002870] Initializing cgroup subsys io
  241. [ 0.002903] Initializing cgroup subsys memory
  242. [ 0.002943] Initializing cgroup subsys devices
  243. [ 0.002968] Initializing cgroup subsys freezer
  244. [ 0.002993] Initializing cgroup subsys net_cls
  245. [ 0.003017] Initializing cgroup subsys perf_event
  246. [ 0.003042] Initializing cgroup subsys net_prio
  247. [ 0.003071] Initializing cgroup subsys hugetlb
  248. [ 0.003094] Initializing cgroup subsys pids
  249. [ 0.003150] ftrace: allocating 43360 entries in 170 pages
  250. [ 0.104289] EFI services will not be available.
  251. [ 0.104335] ASID allocator initialised with 65536 entries
  252. [ 0.111396] Detected VIPT I-cache on CPU1
  253. [ 0.111448] CPU1: Booted secondary processor [410fd030]
  254. [ 0.112520] Detected VIPT I-cache on CPU2
  255. [ 0.112559] CPU2: Booted secondary processor [410fd030]
  256. [ 0.113566] Detected VIPT I-cache on CPU3
  257. [ 0.113602] CPU3: Booted secondary processor [410fd030]
  258. [ 0.113672] Brought up 4 CPUs
  259. [ 0.113791] SMP: Total of 4 processors activated.
  260. [ 0.113815] CPU: All CPU(s) started at EL1
  261. [ 0.113855] alternatives: patching kernel code
  262. [ 0.114588] devtmpfs: initialized
  263. [ 0.134354] evm: security.selinux
  264. [ 0.134382] evm: security.SMACK64
  265. [ 0.134400] evm: security.SMACK64EXEC
  266. [ 0.134417] evm: security.SMACK64TRANSMUTE
  267. [ 0.134434] evm: security.SMACK64MMAP
  268. [ 0.134451] evm: security.ima
  269. [ 0.134467] evm: security.capability
  270. [ 0.135153] DMI not present or invalid.
  271. [ 0.135487] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  272. [ 0.138328] pinctrl core: initialized pinctrl subsystem
  273. [ 0.139924] NET: Registered protocol family 16
  274. [ 0.152506] cpuidle: using governor ladder
  275. [ 0.164516] cpuidle: using governor menu
  276. [ 0.165089] vdso: 2 pages (1 code @ ffffffc001445000, 1 data @ ffffffc001444000)
  277. [ 0.165146] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  278. [ 0.168047] DMA: preallocated 256 KiB pool for atomic allocations
  279. [ 0.168395] Serial: AMBA PL011 UART driver
  280. [ 0.187624] irq: no irq domain found for /soc/q6-smp2p/slave-kernel !
  281. [ 0.188212] irq: no irq domain found for /soc/wcnss-smp2p/slave-kernel !
  282. [ 0.192337] irq: no irq domain found for /soc/qcom,mdss_mdp@1a00000 !
  283. [ 0.193550] qcom-smd smd: new channel 'rpm_requests' info-size: 88 fifo-size: 1024
  284. [ 0.218942] ACPI: Interpreter disabled.
  285. [ 0.228266] msm_bus_fabric_init_driver
  286. [ 0.228483] msm_bus_device 580000.ad-hoc-bus: Dev 1024
  287. [ 0.228516] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  288. [ 0.228550] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  289. [ 0.228714] msm_bus_device 580000.ad-hoc-bus: Dev 0
  290. [ 0.228745] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  291. [ 0.228778] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  292. [ 0.228929] msm_bus_device 580000.ad-hoc-bus: Dev 4096
  293. [ 0.228959] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
  294. [ 0.228992] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
  295. [ 0.234943] msm_bus_init_clk: Valid node clk node 1024 ctx 0
  296. [ 0.234958] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid node clk node 0 ctx 0
  297. [ 0.235077] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
  298. [ 0.235196] msm_bus_init_clk: Valid node clk node 4096 ctx 1[ 0.367163] vgaarb: loaded
  299. [ 0.395341] SCSI subsystem initialized
  300. [ 0.406295] usbcore: registered new interface driver usbfs
  301. [ 0.407428] usbcore: registered new interface driver hub
  302. [ 0.408650] usbcore: registered new device driver usb
  303. [ 0.414838] media: Linux media interface: v0.10
  304. [ 0.415553] Linux video capture interface: v2.00
  305. [ 0.422384] dmi: Firmware registration failed.
  306. [ 0.430994] Advanced Linux Sound Architecture Driver Initialized.
  307. [ 0.445005] Bluetooth: Core ver 2.21
  308. [ 0.445630] NET: Registered protocol family 31
  309. [ 0.445655] Bluetooth: HCI device and connection manager initialized
  310. [ 0.445851] Bluetooth: HCI socket layer initialized
  311. [ 0.446036] Bluetooth: L2CAP socket layer initialized
  312. [ 0.446377] Bluetooth: SCO socket layer initialized
  313. [ 0.454132] NetLabel: Initializing
  314. [ 0.454259] NetLabel: domain hash size = 128
  315. [ 0.454291] NetLabel: protocols = UNLABELED CIPSOv4
  316. [ 0.455075] NetLabel: unlabeled traffic allowed by default
  317. [ 0.463327] clocksource: Switched to clocksource arch_sys_counter
  318. [ 1.269131] AppArmor: AppArmor Filesystem Enabled
  319. [ 1.279831] pnp: PnP ACPI: disabled
  320. [ 1.425872] NET: Registered protocol family 2
  321. [ 1.440481] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  322. [ 1.442753] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  323. [ 1.450160] TCP: Hash tables configured (established 8192 bind 8192)
  324. [ 1.456344] UDP hash table entries: 512 (order: 2, 16384 bytes)
  325. [ 1.456787] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  326. [ 1.462252] NET: Registered protocol family 1
  327. [ 1.473568] RPC: Registered named UNIX socket transport module.
  328. [ 1.473717] RPC: Registered udp transport module.
  329. [ 1.473745] RPC: Registered tcp transport module.
  330. [ 1.473779] RPC: Registered tcp NFSv4.1 backchannel transport module.
  331. [ 1.477746] Trying to unpack rootfs image as initramfs...
  332. [ 2.721638] Freeing initrd memory: 4708K (ffffffc004000000 - ffffffc004499000)
  333. [ 2.733067] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  334. [ 2.738043] kvm [1]: HYP mode not available
  335. [ 2.775233] futex hash table entries: 1024 (order: 5, 131072 bytes)
  336. [ 2.780722] audit: initializing netlink subsys (disabled)
  337. [ 2.782942] audit: type=2000 audit(2.715:1): initialized
  338. [ 2.792132] Initialise system trusted keyring
  339. [ 2.800020] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  340. [ 2.970014] zbud: loaded
  341. [ 2.987646] VFS: Disk quotas dquot_6.6.0
  342. [ 2.991230] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  343. [ 3.025212] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  344. [ 3.065863] NFS: Registering the id_resolver key type
  345. [ 3.066603] Key type id_resolver registered
  346. [ 3.066635] Key type id_legacy registered
  347. [ 3.066842] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  348. [ 3.070827] fuse init (API version 7.23)
  349. [ 3.080970] 9p: Installing v9fs 9p2000 file system support
  350. [ 3.091007] Key type big_key registered
  351. [ 3.122276] Key type asymmetric registered
  352. [ 3.122648] Asymmetric key parser 'x509' registered
  353. [ 3.129257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  354. [ 3.132013] io scheduler noop registered
  355. [ 3.132081] io scheduler deadline registered
  356. [ 3.136244] io scheduler cfq registered (default)
  357. [ 3.180572] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  358. [ 3.181304] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  359. [ 3.239316] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  360. [ 3.370354] msm_serial 78af000.serial: msm_serial: detected port #1
  361. [ 3.373790] msm_serial 78af000.serial: uartclk = 3686400
  362. [ 3.375360] 78af000.serial: ttyMSM1 at MMIO 0x78af000 (irq = 130, base_baud = 230400) is a MSM
  363. [ 3.381793] msm_serial 78b0000.serial: msm_serial: detected port #0
  364. [ 3.382856] msm_serial 78b0000.serial: uartclk = 3686400
  365. [ 3.383595] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 131, base_baud = 230400) is a MSM
  366. [ 3.383825] msm_serial: console setup on port #0
  367. [ 4.503529] console [ttyMSM0] enabled
  368. [ 4.514058] msm_serial: driver initialized
  369. [ 4.526026] [drm] Initialized drm 1.1.0 20060810
  370. [ 4.532676] l6: supplied by s4
  371. [ 4.567638] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
  372. [ 4.570654] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
  373. [ 4.576743] l2: supplied by s3
  374. [ 4.585317] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
  375. [ 4.587492] msm 1a00000.qcom,mdss_mdp: failed to bind 1a98000.qcom,mdss_dsi (ops dsi_ops): -517
  376. [ 4.598360] msm 1a00000.qcom,mdss_mdp: master bind failed: -517
  377. [ 5.097200] brd: module loaded
  378. [ 5.238517] loop: module loaded
  379. [ 5.299087] spi_qup 78b7000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
  380. [ 5.325460] spi_qup 78b9000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
  381. [ 5.342584] spmi spmi-0: PMIC Arb Version-2 (0x20010000)
  382. [ 5.470964] libphy: Fixed MDIO Bus: probed
  383. [ 5.475340] tun: Universal TUN/TAP device driver, 1.6
  384. [ 5.475567] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  385. [ 5.490794] sky2: driver version 1.30
  386. [ 5.494566] PPP generic driver version 2.4.2
  387. [ 5.499361] usbcore: registered new interface driver asix
  388. [ 5.501122] usbcore: registered new interface driver ax88179_178a
  389. [ 5.504770] usbcore: registered new interface driver cdc_ether
  390. [ 5.510635] usbcore: registered new interface driver dm9601
  391. [ 5.516305] usbcore: registered new interface driver net1080
  392. [ 5.521805] usbcore: registered new interface driver plusb
  393. [ 5.527763] usbcore: registered new interface driver cdc_subset
  394. [ 5.532961] usbcore: registered new interface driver zaurus
  395. [ 5.539393] usbcore: registered new interface driver cdc_ncm
  396. [ 5.569240] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  397. [ 5.569552] ehci-pci: EHCI PCI platform driver
  398. [ 5.575902] ehci-platform: EHCI generic platform driver
  399. [ 5.580562] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  400. [ 5.587070] msm_hsusb_host 78d9000.ehci: unable to find transceiver
  401. [ 5.590891] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  402. [ 5.596414] ohci-pci: OHCI PCI platform driver
  403. [ 5.603309] ohci-platform: OHCI generic platform driver
  404. [ 5.607896] uhci_hcd: USB Universal Host Controller Interface driver
  405. [ 5.615577] usbcore: registered new interface driver cdc_acm
  406. [ 5.618577] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  407. [ 5.625133] usbcore: registered new interface driver usblp
  408. [ 5.632603] usbcore: registered new interface driver cdc_wdm
  409. [ 5.638158] usbcore: registered new interface driver uas
  410. [ 5.644313] usbcore: registered new interface driver usb-storage
  411. [ 5.650875] usbcore: registered new interface driver usbserial
  412. [ 5.655186] usbcore: registered new interface driver usbserial_generic
  413. [ 5.660858] usbserial: USB Serial support registered for generic
  414. [ 5.680502] usb3503 usb2513: switched to HUB mode
  415. [ 5.680625] usb3503 usb2513: usb3503_probe: probed in hub mode
  416. [ 5.692012] usbip_core: USB/IP Core v1.0.0
  417. [ 5.692984] usbcore: registered new device driver usbip-host
  418. [ 5.695315] usbip_host: USB/IP Host Driver v1.0.0
  419. [ 5.708354] mousedev: PS/2 mouse device common for all mice
  420. [ 5.727901] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pwrkey@800/input/input0
  421. [ 5.738019] i2c /dev entries driver
  422. [ 5.744224] i2c_qup 78b6000.i2c:
  423. [ 5.744224] tx channel not available
  424. [ 5.757307] i2c_qup 78b8000.i2c:
  425. [ 5.757307] tx channel not available
  426. [ 5.809071] i2c_qup 78ba000.i2c:
  427. [ 5.809071] tx channel not available
  428. [ 5.838296] l3: supplied by s3
  429. [ 5.843994] CPR closed loop is enabled
  430. [ 5.849800] CPR is enabled!
  431. [ 5.876044] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
  432. [ 5.882645] device-mapper: uevent: version 1.0.3
  433. [ 5.890392] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  434. [ 5.890716] Bluetooth: HCI UART driver ver 2.3
  435. [ 5.898198] Bluetooth: HCI UART protocol H4 registered
  436. [ 5.902437] Bluetooth: HCI UART protocol BCSP registered
  437. [ 5.907460] Bluetooth: HCI UART protocol LL registered
  438. [ 5.912915] Bluetooth: HCI UART protocol ATH3K registered
  439. [ 5.917875] Bluetooth: HCI UART protocol Three-wire (H5) registered
  440. [ 5.924724] Bluetooth: HCI UART protocol Intel registered
  441. [ 5.930182] Bluetooth: HCI UART protocol BCM registered
  442. [ 5.934967] Bluetooth: HCI UART protocol QCA registered
  443. [ 5.941346] usbcore: registered new interface driver btusb
  444. [ 5.953549] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
  445. [ 5.973570] sdhci: Secure Digital Host Controller Interface driver
  446. [ 5.973742] sdhci: Copyright(c) Pierre Ossman
  447. [ 5.979658] Synopsys Designware Multimedia Card Interface Driver
  448. [ 5.985592] sdhci-pltfm: SDHCI platform and OF driver helper
  449. [ 6.024584] l5: supplied by s4
  450. [ 6.026076] sdhci_msm 7824900.sdhci: Failed getting OCR mask: 0
  451. [ 6.075442] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
  452. [ 6.095042] sdhci_msm 7864900.sdhci: Got CD GPIO
  453. [ 6.164540] mmc0: MAN_BKOPS_EN bit is not set
  454. [ 6.173330] mmc0: new high speed MMC card at address 0001
  455. [ 6.185541] mmcblk0: mmc0:0001 DS1008 7.28 GiB
  456. [ 6.191233] mmcblk0boot0: mmc0:0001 DS1008 partition 1 4.00 MiB
  457. [ 6.195910] mmcblk0boot1: mmc0:0001 DS1008 partition 2 4.00 MiB
  458. [ 6.199672] mmcblk0rpmb: mmc0:0001 DS1008 partition 3 4.00 MiB
  459. [ 6.210559] mmc1: Reset 0x1 never completed.
  460. [ 6.242818] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
  461. [ 6.250004] sdhci_msm 7864900.sdhci: Failed getting OCR mask: 0
  462. [ 6.353897] mmc1: Reset 0x1 never completed.
  463. [ 6.401753] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
  464. [ 6.436455] ledtrig-cpu: registered to indicate activity on CPUs
  465. [ 6.444510] hidraw: raw HID events driver (C) Jiri Kosina
  466. [ 6.454188] usbcore: registered new interface driver usbhid
  467. [ 6.454357] usbhid: USB HID core driver
  468. [ 6.462947] qcom-q6v5-pil 4080000.qcom,mss: invalid resource
  469. [ 6.463977] DEBUG:pil: starting vdd
  470. [ 6.468466] DEBUG:pil: done vdd
  471. [ 6.477486] l7: supplied by s4
  472. [ 6.488999] qcom-q6v5-pil 4080000.qcom,mss: Found relocation area 75497472@0x0000000086800000
  473. [ 6.490385] remoteproc0: 4080000.qcom,mss is available
  474. [ 6.496749] remoteproc0: Note: remoteproc is still under development and considered experimental.
  475. [ 6.501915] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
  476. [ 6.512900] remoteproc0: Direct firmware load for mba.mbn failed with error -2
  477. [ 6.521494] remoteproc0: failed to load 4080000.qcom,mss
  478. [ 6.542724] qcom-tz-pil soc:pronto_rproc: Found relocation area 6291456@0x000000008b600000
  479. [ 6.544341] remoteproc1: soc:pronto_rproc is available
  480. [ 6.550080] remoteproc1: Note: remoteproc is still under development and considered experimental.
  481. [ 6.555250] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
  482. [ 6.565935] remoteproc1: Direct firmware load for wcnss.mdt failed with error -2
  483. [ 6.574755] remoteproc1: failed to load soc:pronto_rproc
  484. [ 6.576852] qcom-tz-pil soc:vidc_tzpil@0: no crash reason id
  485. [ 6.579510] soc:vidc_tzpil@0 supply qcom,pll not found, using dummy regulator
  486. [ 6.580065] qcom-tz-pil soc:vidc_tzpil@0: failed to read qcom,pll_uV, skipping
  487. [ 6.580091] qcom-tz-pil soc:vidc_tzpil@0: failed to read qcom,pll_uA, skipping
  488. [ 6.580108] qcom-tz-pil soc:vidc_tzpil@0: no wdog IRQ defined
  489. [ 6.580141] qcom-tz-pil soc:vidc_tzpil@0: no fatal IRQ defined
  490. [ 6.580152] qcom-tz-pil soc:vidc_tzpil@0: no ready IRQ defined
  491. [ 6.580155] qcom-tz-pil soc:vidc_tzpil@0: no handover IRQ defined
  492. [ 6.580165] qcom-tz-pil soc:vidc_tzpil@0: no stop-ack IRQ defined
  493. [ 6.580552] qcom-tz-pil soc:vidc_tzpil@0: Found relocation area 8388608@0x000000008f800000
  494. [ 6.581642] remoteproc2: soc:vidc_tzpil@0 is available
  495. [ 6.581660] remoteproc2: Note: remoteproc is still under development and considered experimental.
  496. [ 6.581668] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
  497. [ 6.582758] remoteproc2: Direct firmware load for venus.mdt failed with error -2
  498. [ 6.582805] remoteproc2: failed to load soc:vidc_tzpil@0
  499. [ 6.596997] mmc1: new high speed SDHC card at address 0007
  500. [ 6.613600] mmcblk1: mmc1:0007 SL16G 14.5 GiB
  501. [ 6.631088] coresight-tmc 825000.etf: TMC initialized
  502. [ 6.652647] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9
  503. [ 6.788032] coresight-tmc 826000.etr: TMC initialized
  504. [ 6.803578] coresight-tpiu 820000.tpiu: TPIU initialized
  505. [ 6.816182] coresight-funnel 821000.funnel: FUNNEL initialized
  506. [ 6.823585] coresight-funnel 841000.funnel: FUNNEL initialized
  507. [ 6.840339] coresight-etm4x 85c000.etm: ETM 4.0 initialized
  508. [ 6.850889] coresight-etm4x 85d000.etm: ETM 4.0 initialized
  509. [ 6.861252] coresight-etm4x 85e000.etm: ETM 4.0 initialized
  510. [ 6.871549] coresight-etm4x 85f000.etm: ETM 4.0 initialized
  511. [ 6.878105] coresight-replicator-qcom 824000.replicator: REPLICATOR 1.0 initialized
  512. [ 6.895537] usbcore: registered new interface driver snd-usb-audio
  513. [ 6.935475] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
  514. [ 6.935966] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
  515. [ 6.945531] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
  516. [ 6.956038] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
  517. [ 6.982456] l5: Restricting voltage, 2700000-1800000uV
  518. [ 6.985128] msm8x16-wcd-codec 200f000.spmi:pm8916@1:codec@f000: msm8x16_wcd_codec_probe :PMIC REV: 1
  519. [ 6.986731] msm8x16-wcd-codec 200f000.spmi:pm8916@1:codec@f000: msm8x16_wcd_codec_probe :CODEC Version: 1
  520. [ 7.005434] msm8x16-wcd-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: no source widget found for VDD_SPKDRV
  521. [ 7.005645] msm8x16-wcd-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: Failed to add route VDD_SPKDRV -> direct -> SPK DAC
  522. [ 7.036479] qcom-apq8016-sbc 7702000.sound: adv7511 <-> Quatenary MI2S mapping ok
  523. [ 7.047766] qcom-apq8016-sbc 7702000.sound: msm8x16_wcd_i2s_rx1 <-> Primary MI2S mapping ok
  524. [ 7.056112] qcom-apq8016-sbc 7702000.sound: msm8x16_wcd_i2s_tx1 <-> Tertiary MI2S mapping ok
  525. [ 7.057008] qcom-apq8016-sbc 7702000.sound: Connecting non-supply widget to supply widget is not supported (Handset Mic -> MIC BIAS Externa)
  526. [ 7.063915] qcom-apq8016-sbc 7702000.sound: ASoC: no dapm match for Handset Mic --> (null) --> MIC BIAS External
  527. [ 7.076496] qcom-apq8016-sbc 7702000.sound: ASoC: Failed to add route Handset Mic -> direct -> MIC BIAS External
  528. [ 7.086720] qcom-apq8016-sbc 7702000.sound: Connecting non-supply widget to supply widget is not supported (Headset Mic -> MIC BIAS Interna)
  529. [ 7.096852] qcom-apq8016-sbc 7702000.sound: ASoC: no dapm match for Headset Mic --> (null) --> MIC BIAS Internal2
  530. [ 7.109421] qcom-apq8016-sbc 7702000.sound: ASoC: Failed to add route Headset Mic -> direct -> MIC BIAS Internal2
  531. [ 7.119741] qcom-apq8016-sbc 7702000.sound: Connecting non-supply widget to supply widget is not supported (Secondary Mic -> MIC BIAS Exter)
  532. [ 7.130008] qcom-apq8016-sbc 7702000.sound: ASoC: no dapm match for Secondary Mic --> (null) --> MIC BIAS External
  533. [ 7.142654] qcom-apq8016-sbc 7702000.sound: ASoC: Failed to add route Secondary Mic -> direct -> MIC BIAS External
  534. [ 7.153203] qcom-apq8016-sbc 7702000.sound: Connecting non-supply widget to supply widget is not supported (Digital Mic1 -> MIC BIAS Intern)
  535. [ 7.163452] qcom-apq8016-sbc 7702000.sound: ASoC: no dapm match for Digital Mic1 --> (null) --> MIC BIAS Internal1
  536. [ 7.176169] qcom-apq8016-sbc 7702000.sound: ASoC: Failed to add route Digital Mic1 -> direct -> MIC BIAS Internal1
  537. [ 7.186619] qcom-apq8016-sbc 7702000.sound: Connecting non-supply widget to supply widget is not supported (Digital Mic2 -> MIC BIAS Intern)
  538. [ 7.196949] qcom-apq8016-sbc 7702000.sound: ASoC: no dapm match for Digital Mic2 --> (null) --> MIC BIAS Internal1
  539. [ 7.209682] qcom-apq8016-sbc 7702000.sound: ASoC: Failed to add route Digital Mic2 -> direct -> MIC BIAS Internal1
  540. [ 7.226149] msm8x16-wcd-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: mux RX2 MIX1 INP3 has no paths
  541. [ 7.230766] msm8x16-wcd-codec 200f000.spmi:pm8916@1:codec@f000: ASoC: mux RX3 MIX1 INP3 has no paths
  542. [ 7.305353] NET: Registered protocol family 10
  543. [ 7.321505] sit: IPv6 over IPv4 tunneling driver
  544. [ 7.333385] NET: Registered protocol family 17
  545. [ 7.335867] Bluetooth: RFCOMM TTY layer initialized
  546. [ 7.337055] Bluetooth: RFCOMM socket layer initialized
  547. [ 7.341973] Bluetooth: RFCOMM ver 1.11
  548. [ 7.346933] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  549. [ 7.350747] Bluetooth: HIDP socket layer initialized
  550. [ 7.358239] 9pnet: Installing 9P2000 support
  551. [ 7.363499] Key type dns_resolver registered
  552. [ 7.381317] registered taskstats version 1
  553. [ 7.381919] Loading compiled-in X.509 certificates
  554. [ 7.390174] Loaded X.509 cert 'Build time autogenerated kernel key: 1f38f7115b4036c142daf43a220e1613e7774316'
  555. [ 7.392021] zswap: loaded using pool lzo/zbud
  556. [ 7.503146] Key type trusted registered
  557. [ 7.671613] Key type encrypted registered
  558. [ 7.672764] AppArmor: AppArmor sha1 policy hashing enabled
  559. [ 7.675399] ima: No TPM chip found, activating TPM-bypass!
  560. [ 7.683581] evm: HMAC attrs: 0x1
  561. [ 7.696394] msm_iommu 1f00000.qcom,iommu: invalid resource
  562. [ 7.699366] msm_iommu 1f00000.qcom,iommu: iface: 100000000, core: 800000000
  563. [ 7.701203] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffffff8000fa0000, with 2 ctx banks
  564. [ 7.708523] msm_iommu 1f00000.qcom,iommu: iommu sec: pgtable size: 94208
  565. [ 7.746607] genirq: Setting trigger mode 1 for irq 156 failed (gic_set_type+0x0/0x68)
  566. [ 7.747453] msm_iommu 1f00000.qcom,iommu: Request Global CFG IRQ 156 failed with ret=-22
  567. [ 7.766720] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
  568. [ 7.776157] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
  569. [ 7.780647] msm_iommu 1e00000.qcom,iommu: iface: 100000000, core: 800000000
  570. [ 7.783623] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001380000, with 20 ctx banks
  571. [ 7.790874] genirq: Setting trigger mode 1 for irq 156 failed (gic_set_type+0x0/0x68)
  572. [ 7.800635] msm_iommu 1e00000.qcom,iommu: Request Global CFG IRQ 156 failed with ret=-22
  573. [ 7.814824] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
  574. [ 7.821530] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
  575. [ 7.828219] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
  576. [ 7.834399] msm_iommu_ctx 1e25000.venus_ns: context venus_ns using bank 5
  577. [ 7.841501] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
  578. [ 7.848147] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
  579. [ 7.854390] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
  580. [ 7.861370] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
  581. [ 7.868869] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
  582. [ 7.874816] msm_iommu_ctx 1e33000.venus_sec_pixel: context venus_sec_pixel using bank 19
  583. [ 7.881958] msm_iommu_ctx 1e34000.venus_sec_bitstream: context venus_sec_bitstream using bank 20
  584. [ 7.890139] msm_iommu_ctx 1e35000.venus_sec_non_pixel: context venus_sec_non_pixel using bank 21
  585. [ 7.899042] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
  586. [ 7.907852] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
  587. [ 7.914752] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
  588. [ 7.921994] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
  589. [ 7.930177] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
  590. [ 7.937608] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
  591. [ 7.944856] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
  592. [ 7.952858] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
  593. [ 7.987547] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
  594. [ 7.990103] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
  595. [ 8.003374] msm 1a00000.qcom,mdss_mdp: bound 1a98000.qcom,mdss_dsi (ops dsi_ops)
  596. [ 8.004096] msm 1a00000.qcom,mdss_mdp: bound 1c00000.qcom,adreno-3xx (ops a3xx_ops)
  597. [ 8.011478] 1a00000.qcom,mdss_mdp supply vdd not found, using dummy regulator
  598. [ 8.054847] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  599. [ 8.055043] [drm] No driver support for vblank timestamp query.
  600. [ 8.065907] msm 1a00000.qcom,mdss_mdp: No connectors reported connected with modes
  601. [ 8.066587] [drm] Cannot find any crtc or sizes - going 1024x768
  602. [ 8.343172] Console: switching to colour frame buffer device 128x48
  603. [ 8.466439] msm 1a00000.qcom,mdss_mdp: fb0: msm frame buffer device
  604. [ 8.483767] [drm] Initialized msm 1.0.0 20130625 on minor 0
  605. [ 8.501212] msm_otg 78d9000.phy: OTG regs = ffffff8000b36000
  606. [ 8.507030] msm_otg 78d9000.phy: no vddcx
  607. [ 8.624387] msm_hsusb_host 78d9000.ehci: EHCI Host Controller
  608. [ 8.624666] msm_hsusb_host 78d9000.ehci: new USB bus registered, assigned bus number 1
  609. [ 8.629894] msm_hsusb_host 78d9000.ehci: irq 142, io mem 0x078d9000
  610. [ 8.642913] input: gpio_keys as /devices/platform/gpio_keys/input/input1
  611. [ 8.643415] hctosys: unable to open rtc device (rtc0)
  612. [ 8.647095] msm_hsusb_host 78d9000.ehci: USB 2.0 started, EHCI 1.00
  613. [ 8.647240] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  614. [ 8.647245] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  615. [ 8.647249] usb usb1: Product: EHCI Host Controller
  616. [ 8.647252] usb usb1: Manufacturer: Linux 4.4.49-xenial_snapdragon+ ehci_hcd
  617. [ 8.647256] usb usb1: SerialNumber: 78d9000.ehci
  618. [ 8.647661] hub 1-0:1.0: USB hub found
  619. [ 8.647681] hub 1-0:1.0: 1 port detected
  620. [ 8.701424] ALSA device list:
  621. [ 8.701508] #0: DB410c
  622. [ 8.704054] Freeing unused kernel memory: 1200K (ffffffc0012fb000 - ffffffc001427000)
  623. [ 8.706060] Freeing alternatives memory: 72K (ffffffc001427000 - ffffffc001439000)
  624. [ 8.751783] random: systemd-udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
  625. [ 8.754490] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
  626. [ 8.754622] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
  627. [ 8.754659] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
  628. [ 8.754722] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
  629. [ 8.754948] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
  630. [ 8.755003] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
  631. [ 8.755242] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
  632. [ 8.755298] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
  633. [ 8.755489] random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
  634. [ 8.959117] usb 1-1: new high-speed USB device number 2 using msm_hsusb_host
  635. [ 9.095707] usb 1-1: New USB device found, idVendor=0424, idProduct=2513
  636. [ 9.099670] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  637. [ 9.105982] hub 1-1:1.0: USB hub found
  638. [ 9.112611] hub 1-1:1.0: 3 ports detected
  639. [ 9.382081] initrd: checking filesystem for writable partition
  640. [ 9.387110] usb 1-1.1: new high-speed USB device number 3 using msm_hsusb_host
  641. [ 9.393403] EXT4-fs (mmcblk1p9): couldn't mount as ext3 due to feature incompatibilities
  642. [ 9.496073] usb 1-1.1: New USB device found, idVendor=0424, idProduct=7500
  643. [ 9.499615] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  644. [ 9.505343] usb 1-1.1: Product: LAN7500
  645. [ 9.512543] usb 1-1.1: Manufacturer: SMSC
  646. [ 9.516362] usb 1-1.1: SerialNumber: 0000750665
  647. [ 10.779513] EXT4-fs (mmcblk1p9): mounted filesystem with ordered data mode. Opts: errors=remount-ro
  648. [ 10.877142] EXT4-fs (mmcblk1p9): couldn't mount as ext3 due to feature incompatibilities
  649. [ 10.912241] EXT4-fs (mmcblk1p9): mounted filesystem with ordered data mode. Opts: (null)
  650. [ 11.063540] initrd: mounting /run
  651. [ 12.921083] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCR)
  652. [ 12.929166] systemd[1]: Detected architecture arm64.
  653. [ 12.978531] systemd[1]: Set hostname to <localhost.localdomain>.
  654. [ 13.430869] systemd[1]: writable.mount: Unit is bound to inactive unit dev-mmcblk1p9.device. Stopping, too.
  655. [ 13.441942] systemd[1]: Listening on Syslog Socket.
  656. [ 13.450827] systemd[1]: Reached target Swap.
  657. [ 13.459754] systemd[1]: Listening on udev Control Socket.
  658. [ 13.469136] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  659. [ 13.478407] systemd[1]: Reached target Encrypted Volumes.
  660. [ 13.487821] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  661. [ 13.497419] systemd[1]: Reached target Remote File Systems (Pre).
  662. [ 13.506998] systemd[1]: Reached target Remote File Systems.
  663. [ 13.516828] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  664. [ 13.526818] systemd[1]: Listening on udev Kernel Socket.
  665. [ 13.536806] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  666. [ 13.547021] systemd[1]: Created slice User and Session Slice.
  667. [ 13.557047] systemd[1]: Listening on Journal Socket (/dev/log).
  668. [ 13.567358] systemd[1]: Listening on Journal Audit Socket.
  669. [ 13.577487] systemd[1]: Listening on Journal Socket.
  670. [ 13.587445] systemd[1]: Listening on fsck to fsckd communication Socket.
  671. [ 13.597530] systemd[1]: Created slice System Slice.
  672. [ 13.623380] systemd[1]: Starting Set the hostname to the value stored on the writable partition...
  673. [ 13.635641] systemd[1]: Starting Remount Root and Kernel File Systems...
  674. [ 13.647995] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  675. [ 13.659378] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  676. [ 13.671770] systemd[1]: Mounting Debug File System...
  677. [ 13.684115] systemd[1]: Mounting POSIX Message Queue File System...
  678. [ 13.696653] systemd[1]: Starting Set console keymap...
  679. [ 13.716316] systemd[1]: Starting Load Kernel Modules...
  680. [ 13.729219] systemd[1]: Starting Journal Service...
  681. [ 13.740321] systemd[1]: Created slice system-serial\x2dgetty.slice.
  682. [ 13.751024] systemd[1]: Reached target Slices.
  683. [ 13.762935] systemd[1]: Starting Nameserver information manager...
  684. [ 13.774927] systemd[1]: Mounting Huge Pages File System...
  685. [ 13.833802] ip6_tables: (C) 2000-2006 Netfilter Core Team
  686. [ 13.835513] systemd[1]: Started Set the hostname to the value stored on the writable partition.
  687. [ 13.851469] systemd[1]: Started Create list of required static device nodes for the current kernel.
  688. [ 13.880855] ip_tables: (C) 2000-2006 Netfilter Core Team
  689. [ 13.912644] systemd[1]: Started Load Kernel Modules.
  690. [ 14.000863] systemd[1]: Mounted Debug File System.
  691. [ 14.011841] systemd[1]: Mounted POSIX Message Queue File System.
  692. [ 14.022422] systemd[1]: Mounted Huge Pages File System.
  693. [ 14.058150] systemd[1]: Started Journal Service.
  694. [ 15.142828] spmi-temp-alarm 200f000.spmi:pm8916@0:temp-alarm@2400: failed to register sensor
  695. [ 16.150594] qcom-smd smd: new channel 'IPCRTR' info-size: 40 fifo-size: 8192
  696. [ 16.186553] qcom-smd smd: new channel 'sys_mon' info-size: 40 fifo-size: 1024
  697. [ 16.202511] qcom-smd smd: new channel 'APPS_RIVA_CTRL' info-size: 40 fifo-size: 8192
  698. [ 16.206175] qcom-smd smd: new channel 'APPS_RIVA_DATA' info-size: 40 fifo-size: 8192
  699. [ 16.403729] qcom-smd smd: new channel 'WCNSS_CTRL' info-size: 40 fifo-size: 8192
  700. [ 16.407326] qcom-smd smd: new channel 'WLAN_CTRL' info-size: 40 fifo-size: 8192
  701. [ 16.917819] EXT4-fs (mmcblk0rpmb): unable to read superblock
  702. [ 16.928796] EXT4-fs (mmcblk0rpmb): unable to read superblock
  703. [ 16.946777] EXT2-fs (mmcblk0rpmb): error: unable to read superblock
  704. [ 16.961833] SQUASHFS error: squashfs_read_data failed to read block 0x0
  705. [ 16.965095] squashfs: SQUASHFS error: unable to read squashfs_super_block
  706. [ 17.695440] qcom-smd smd: new channel 'APPS_RIVA_BT_CMD' info-size: 40 fifo-size: 8192
  707. [ 17.697345] qcom-smd smd: new channel 'APPS_RIVA_BT_ACL' info-size: 40 fifo-size: 8192
  708. [ 17.704191] qcom-smd smd: new channel 'APPS_RIVA_ANT_CMD' info-size: 40 fifo-size: 1024
  709. [ 17.712041] qcom-smd smd: new channel 'APPS_RIVA_ANT_DATA' info-size: 40 fifo-size: 2048
  710. [ 17.719949] qcom-smd smd: new channel 'APPS_FM' info-size: 40 fifo-size: 8192
  711. [ 38.859637] aufs aufs_fill_super:906:mount[1531]: no arg
  712. [ 38.917104] overlayfs: missing 'lowerdir'
  713.  
  714. Ubuntu Core 16 on 10.99.6.196 (ttyMSM0)
  715.  
  716. localhost login:
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!