Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- hikipoksi:~# dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-22lenny1) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed May 12 21:56:10 UTC 2010
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
- [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
- [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
- [ 0.000000] 0MB HIGHMEM available.
- [ 0.000000] 511MB LOWMEM available.
- [ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0 -> 4096
- [ 0.000000] Normal 4096 -> 131056
- [ 0.000000] HighMem 131056 -> 131056
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[1] active PFN ranges
- [ 0.000000] 0: 0 -> 131056
- [ 0.000000] On node 0 totalpages: 131056
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
- [ 0.000000] Normal zone: 992 pages used for memmap
- [ 0.000000] Normal zone: 125968 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 0 pages used for memmap
- [ 0.000000] Movable zone: 0 pages used for memmap
- [ 0.000000] DMI 2.3 present.
- [ 0.000000] ACPI: RSDP 000F8CA0, 0014 (r0 KT600 )
- [ 0.000000] ACPI: RSDT 1FFF3040, 0028 (r1 KT600 AWRDACPI 42302E31 AWRD 0)
- [ 0.000000] ACPI: FACP 1FFF30C0, 0074 (r1 KT600 AWRDACPI 42302E31 AWRD 0)
- [ 0.000000] ACPI: DSDT 1FFF3180, 5289 (r1 KT600 AWRDACPI 1000 MSFT 100000E)
- [ 0.000000] ACPI: FACS 1FFF0000, 0040
- [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
- [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- [ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs
- [ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data
- [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032
- [ 0.000000] Kernel command line: root=/dev/hda1 ro quiet
- [ 0.000000] Found and enabled local APIC!
- [ 0.000000] mapped APIC to ffffb000 (fee00000)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
- [ 0.000000] Detected 1661.344 MHz processor.
- [ 0.004000] Console: colour VGA+ 80x25
- [ 0.004000] console [tty0] enabled
- [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.004000] Memory: 509764k/524224k available (1771k kernel code, 13868k reserved, 750k data, 244k init, 0k highmem)
- [ 0.004000] virtual kernel memory layout:
- [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
- [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.004000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
- [ 0.004000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
- [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
- [ 0.004000] .data : 0xc02bad7d - 0xc0376620 ( 750 kB)
- [ 0.004000] .text : 0xc0100000 - 0xc02bad7d (1771 kB)
- [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
- [ 0.084148] Calibrating delay using timer specific routine.. 3327.21 BogoMIPS (lpj=6654429)
- [ 0.084200] Security Framework initialized
- [ 0.084209] SELinux: Disabled at boot.
- [ 0.084215] Capability LSM initialized
- [ 0.084237] Mount-cache hash table entries: 512
- [ 0.084450] Initializing cgroup subsys ns
- [ 0.084457] Initializing cgroup subsys cpuacct
- [ 0.084460] Initializing cgroup subsys devices
- [ 0.084485] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.084489] CPU: L2 Cache: 256K (64 bytes/line)
- [ 0.084495] Intel machine check architecture supported.
- [ 0.084499] Intel machine check reporting enabled on CPU#0.
- [ 0.084519] Checking 'hlt' instruction... OK.
- [ 0.100378] SMP alternatives: switching to UP code
- [ 0.108636] Freeing SMP alternatives: 16k freed
- [ 0.108644] ACPI: Core revision 20080321
- [ 0.120007] ACPI: setting ELCR to 0200 (from 0aa0)
- [ 0.124007] weird, boot CPU (#0) not listedby the BIOS.
- [ 0.124007] SMP motherboard not detected.
- [ 0.124007] SMP disabled
- [ 0.124007] Brought up 1 CPUs
- [ 0.124007] Total of 1 processors activated (3327.21 BogoMIPS).
- [ 0.124007] CPU0 attaching sched-domain:
- [ 0.124007] domain 0: span 0
- [ 0.124007] groups: 0
- [ 0.124007] net_namespace: 660 bytes
- [ 0.124007] Booting paravirtualized kernel on bare hardware
- [ 0.124007] NET: Registered protocol family 16
- [ 0.124007] ACPI: bus type pci registered
- [ 0.131763] PCI: PCI BIOS revision 2.10 entry at 0xfacf0, last bus=1
- [ 0.131767] PCI: Using configuration type 1 for base access
- [ 0.131774] Setting up standard PCI resources
- [ 0.140601] ACPI: EC: Look up EC in DSDT
- [ 0.150804] ACPI: Interpreter enabled
- [ 0.150815] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.150846] ACPI: Using PIC for interrupt routing
- [ 0.160877] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.161624] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.213972] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
- [ 0.214234] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 *7 10 11 12)
- [ 0.214499] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
- [ 0.214732] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
- [ 0.214963] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
- [ 0.215183] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
- [ 0.215402] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
- [ 0.215623] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
- [ 0.215906] ACPI: PCI Interrupt Link [ALKA] (IRQs *20), disabled.
- [ 0.216178] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
- [ 0.216444] ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled.
- [ 0.216754] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
- [ 0.216944] Linux Plug and Play Support v0.97 (c) Adam Belay
- [ 0.216993] pnp: PnP ACPI init
- [ 0.217005] ACPI: bus type pnp registered
- [ 0.223417] pnp: PnP ACPI: found 12 devices
- [ 0.223422] ACPI: ACPI bus type pnp unregistered
- [ 0.223428] PnPBIOS: Disabled by ACPI PNP
- [ 0.223837] PCI: Using ACPI for IRQ routing
- [ 0.224107] ACPI: RTC can wake from S4
- [ 0.224150] system 00:00: iomem range 0xd0000-0xd3fff has been reserved
- [ 0.224155] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
- [ 0.224159] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
- [ 0.224163] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
- [ 0.224167] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved
- [ 0.224172] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
- [ 0.224176] system 00:00: iomem range 0x0-0x9ffff could not be reserved
- [ 0.224179] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
- [ 0.224183] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.224188] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
- [ 0.224192] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
- [ 0.224203] system 00:02: ioport range 0x4000-0x407f has been reserved
- [ 0.224207] system 00:02: ioport range 0x5000-0x500f has been reserved
- [ 0.224223] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.224227] system 00:03: ioport range 0x800-0x805 has been reserved
- [ 0.224231] system 00:03: ioport range 0x290-0x297 has been reserved
- [ 0.254814] PCI: Bridge: 0000:00:01.0
- [ 0.254818] IO window: disabled.
- [ 0.254824] MEM window: 0xe4000000-0xe6ffffff
- [ 0.254828] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
- [ 0.254848] PCI: Setting latency timer of device 0000:00:01.0 to 64
- [ 0.254877] NET: Registered protocol family 2
- [ 0.255005] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.255311] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.255580] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.255846] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.255850] TCP reno registered
- [ 0.256003] NET: Registered protocol family 1
- [ 0.256207] checking if image is initramfs... it is
- [ 0.756067] Switched to high resolution mode on CPU 0
- [ 0.857980] Freeing initrd memory: 6071k freed
- [ 0.859060] audit: initializing netlink socket (disabled)
- [ 0.859082] type=2000 audit(1275667803.856:1): initialized
- [ 0.859261] Total HugeTLB memory allocated, 0
- [ 0.859357] VFS: Disk quotas dquot_6.5.1
- [ 0.859401] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.859459] msgmni has been set to 1007
- [ 0.859607] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.859613] io scheduler noop registered
- [ 0.859617] io scheduler anticipatory registered
- [ 0.859620] io scheduler deadline registered
- [ 0.859631] io scheduler cfq registered (default)
- [ 0.859647] PCI: VIA PCI bridge detected.Disabling DAC.
- [ 0.859725] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
- [ 0.859747] pci 0000:01:00.0: Boot video device
- [ 0.860252] isapnp: Scanning for PnP cards...
- [ 1.214351] isapnp: No Plug & Play device found
- [ 1.218126] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
- [ 1.221400] brd: module loaded
- [ 1.221549] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 1.221951] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.221959] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.222171] mice: PS/2 mouse device common for all mice
- [ 1.222367] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 1.222396] rtc0: alarms up to one year, y3k
- [ 1.222446] cpuidle: using governor ladder
- [ 1.222450] cpuidle: using governor menu
- [ 1.222457] No iBFT detected.
- [ 1.223077] TCP cubic registered
- [ 1.223082] NET: Registered protocol family 17
- [ 1.223092] Using IPI No-Shortcut mode
- [ 1.223268] registered taskstats version 1
- [ 1.223465] rtc_cmos 00:05: setting system clock to 2010-06-04 16:10:04 UTC (1275667804)
- [ 1.223864] Freeing unused kernel memory: 244k freed
- [ 1.238901] input: AT Translated Set 2 keyboard as /class/input/input0
- [ 1.356416] ACPI: PNP0C0B:00 is registered as cooling_device0
- [ 1.356428] ACPI: Fan [FAN] (on)
- [ 1.364824] ACPI: CPU0 (power states: C1[C1] C2[C2])
- [ 1.364905] ACPI: ACPI0007:00 is registered as cooling_device1
- [ 1.367528] ACPI: LNXTHERM:01 is registered as thermal_zone0
- [ 1.367753] ACPI: Thermal Zone [THRM] (34 C)
- [ 1.986005] 8139too Fast Ethernet driver 0.9.28
- [ 1.986675] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
- [ 1.986680] PCI: setting IRQ 11 as level-triggered
- [ 1.986687] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
- [ 1.987346] eth0: RealTek RTL8139 at 0xe000, 00:30:84:**:**:**, IRQ 11
- [ 1.987349] eth0: Identified 8139 chip type 'RTL-8139C'
- [ 2.000213] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- [ 2.280244] Uniform Multi-Platform E-IDE driver
- [ 2.280254] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
- [ 2.295919] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:0f.0
- [ 2.295961] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
- [ 2.295971] VIA_IDE 0000:00:0f.0: VIA VLink IRQ fixup, from 255 to 11
- [ 2.296040] VP_IDE: not 100% native mode: will probe irqs later
- [ 2.296057] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
- [ 2.296071] ide0: BM-DMA at 0xe100-0xe107
- [ 2.296084] ide1: BM-DMA at 0xe108-0xe10f
- [ 2.296091] Probing IDE interface ide0...
- [ 2.332061] usbcore: registered new interface driver usbfs
- [ 2.332108] usbcore: registered new interface driver hub
- [ 2.332155] usbcore: registered new device driver usb
- [ 2.337848] USB Universal Host Controller Interface driver v3.0
- [ 2.600447] Marking TSC unstable due to: TSC halts in idle.
- [ 2.712225] hda: Maxtor 6Y160L0, ATA DISK drive
- [ 3.160115] hdb: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
- [ 3.216109] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
- [ 3.216265] hda: UDMA/133 mode selected
- [ 3.216395] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
- [ 3.217189] hdb: UDMA/33 mode selected
- [ 3.217673] Probing IDE interface ide1...
- [ 3.784088] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
- [ 3.804488] ide1 at 0x170-0x177,0x376 on irq 15
- [ 3.804488] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
- [ 3.804488] uhci_hcd 0000:00:10.0: UHCI Host Controller
- [ 3.804488] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
- [ 3.804488] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000e200
- [ 3.804488] usb usb1: configuration #1 chosen from 1 choice
- [ 3.804488] hub 1-0:1.0: USB hub found
- [ 3.804488] hub 1-0:1.0: 2 ports detected
- [ 3.908197] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.908203] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.908206] usb usb1: Product: UHCI Host Controller
- [ 3.908209] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
- [ 3.908212] usb usb1: SerialNumber: 0000:00:10.0
- [ 3.908356] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
- [ 3.908374] uhci_hcd 0000:00:10.1: UHCI Host Controller
- [ 3.908409] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
- [ 3.908436] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000e300
- [ 3.908555] usb usb2: configuration #1 chosen from 1 choice
- [ 3.908594] hub 2-0:1.0: USB hub found
- [ 3.908611] hub 2-0:1.0: 2 ports detected
- [ 3.911255] No dock devices found.
- [ 3.920933] SCSI subsystem initialized
- [ 3.933741] libata version 3.00 loaded.
- [ 4.012198] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 4.012204] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.012208] usb usb2: Product: UHCI Host Controller
- [ 4.012211] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
- [ 4.012213] usb usb2: SerialNumber: 0000:00:10.1
- [ 4.012837] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
- [ 4.012842] PCI: setting IRQ 7 as level-triggered
- [ 4.012849] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
- [ 4.012866] uhci_hcd 0000:00:10.2: UHCI Host Controller
- [ 4.012906] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
- [ 4.012935] uhci_hcd 0000:00:10.2: irq 7, io base 0x0000e400
- [ 4.013065] usb usb3: configuration #1 chosen from 1 choice
- [ 4.013107] hub 3-0:1.0: USB hub found
- [ 4.013121] hub 3-0:1.0: 2 ports detected
- [ 4.116171] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 4.116177] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.116181] usb usb3: Product: UHCI Host Controller
- [ 4.116183] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
- [ 4.116186] usb usb3: SerialNumber: 0000:00:10.2
- [ 4.116263] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
- [ 4.116280] uhci_hcd 0000:00:10.3: UHCI Host Controller
- [ 4.116319] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
- [ 4.116345] uhci_hcd 0000:00:10.3: irq 7, io base 0x0000e500
- [ 4.116468] usb usb4: configuration #1 chosen from 1 choice
- [ 4.116510] hub 4-0:1.0: USB hub found
- [ 4.116524] hub 4-0:1.0: 2 ports detected
- [ 4.220162] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 4.220167] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.220171] usb usb4: Product: UHCI Host Controller
- [ 4.220173] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
- [ 4.220176] usb usb4: SerialNumber: 0000:00:10.3
- [ 4.220847] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
- [ 4.220852] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
- [ 4.220860] ehci_hcd 0000:00:10.4: VIA VLink IRQ fixup, from 5 to 11
- [ 4.220899] ehci_hcd 0000:00:10.4: EHCI Host Controller
- [ 4.220938] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
- [ 4.220996] ehci_hcd 0000:00:10.4: irq 11, io mem 0xe7002000
- [ 4.232046] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- [ 4.232163] usb usb5: configuration #1 chosen from 1 choice
- [ 4.232207] hub 5-0:1.0: USB hub found
- [ 4.232225] hub 5-0:1.0: 8 ports detected
- [ 4.336174] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
- [ 4.336180] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.336183] usb usb5: Product: EHCI Host Controller
- [ 4.336186] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
- [ 4.336189] usb usb5: SerialNumber: 0000:00:10.4
- [ 4.379128] hda: max request size: 512KiB
- [ 4.379556] hda: 320173056 sectors (163928 MB) w/2048KiB Cache, CHS=19929/255/63
- [ 4.381871] hda: cache flushes supported
- [ 4.381955] hda: hda1 hda2 < hda5 >
- [ 4.404676] hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
- [ 4.404690] Uniform CD-ROM driver Revision: 3.20
- [ 4.932442] PM: Starting manual resume from disk
- [ 4.973620] kjournald starting. Commit interval 5 seconds
- [ 4.973620] EXT3-fs: mounted filesystem with ordered data mode.
- [ 6.719921] udevd version 125 started
- [ 8.226484] Linux agpgart interface v0.103
- [ 8.232068] agpgart: Detected VIA KT400/KT400A/KT600 chipset
- [ 8.236963] agpgart: AGP aperture is 64M @ 0xe0000000
- [ 8.264542] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 8.276303] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 8.813059] input: Power Button (FF) as /class/input/input1
- [ 8.840678] ACPI: Power Button (FF) [PWRF]
- [ 8.840792] input: Power Button (CM) as /class/input/input2
- [ 8.870147] ACPI: Power Button (CM) [PWRB]
- [ 8.870258] input: Sleep Button (CM) as /class/input/input3
- [ 8.897148] ACPI: Sleep Button (CM) [SLPB]
- [ 9.774824] input: PC Speaker as /class/input/input4
- [ 9.991466] logips2pp: Detected unknown logitech mouse model 127
- [ 10.326083] gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 917kHz
- [ 10.465536] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input5
- [ 11.685336] Adding 1951856k swap on /dev/hda5. Priority:-1 extents:1 across:1951856k
- [ 12.160128] EXT3 FS on hda1, internal journal
- [ 12.736772] loop: module loaded
- [ 14.144826] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
- [ 16.527684] NET: Registered protocol family 10
- [ 16.528284] lo: Disabled Privacy Extensions
- [ 17.303296] lp: driver loaded but no devices found
- [ 17.355744] ppdev: user-space parallel port driver
- [ 38.156029] eth0: no IPv6 routers present
- hikipoksi:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement