Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2014.01-09730-gb5bd4c9 (Mar 08 2014 - 00:03:52)
- Board: Mele_A1000
- DRAM: 512 MiB
- CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
- spl: not an uImage at 1600
- U-Boot 2014.01-09730-gb5bd4c9 (Mar 08 2014 - 00:03:52) Allwinner Technology
- CPU: Allwinner A10 (SUN4I)
- Board: Mele_A1000
- I2C: ready
- DRAM: 512 MiB
- MMC: SUNXI SD/MMC: 0
- *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- Net: emac
- Hit any key to stop autoboot: 0
- reading uEnv.txt
- ** Unable to read file uEnv.txt **
- Failed to mount ext2 filesystem...
- ** Unrecognized filesystem type **
- Failed to mount ext2 filesystem...
- ** Unrecognized filesystem type **
- reading boot.scr
- 294 bytes read in 3 ms (95.7 KiB/s)
- Jumping to boot.scr
- ## Executing script at 44000000
- reading sun4i-a10-a1000.dtb
- 17159 bytes read in 7 ms (2.3 MiB/s)
- reading uImage
- 4244864 bytes read in 215 ms (18.8 MiB/s)
- ## Booting kernel from Legacy Image at 46000000 ...
- Image Name: Linux-3.16.0
- Created: 2014-08-12 18:43:27 UTC
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 4244800 Bytes = 4 MiB
- Load Address: 40008000
- Entry Point: 40008000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 49000000
- Booting using the fdt blob at 0x49000000
- Loading Kernel Image ... OK
- Using Device Tree in place at 49000000, end 49007306
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 3.16.0 (matthew@darjeeling) (gcc version 4.8.1 (Fedora 2013.11.24-2.fc20) ) #1 Tue Aug 12 13:37:26 CDT 2014
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: Mele A1000
- [ 0.000000] Memory policy: Data cache writeback
- [ 0.000000] On node 0 totalpages: 131072
- [ 0.000000] free_area_init_node: node 0, pgdat c06a42a4, node_mem_map dfbfa000
- [ 0.000000] Normal zone: 1024 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 131072 pages, LIFO batch:31
- [ 0.000000] CPU: All CPU(s) started in SVC mode.
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
- [ 0.000000] Kernel command line: console=ttyS0,115200 loglevel=9 earlyprintk rootwait root=/dev/mmcblk0p2
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 512616K/524288K available (4457K kernel code, 267K rwdata, 1888K rodata, 155K init, 256K bss, 11672K reserved, 0K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
- [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc063a6e8 (6346 kB)
- [ 0.000000] .init : 0xc063b000 - 0xc0661c54 ( 156 kB)
- [ 0.000000] .data : 0xc0662000 - 0xc06a4e00 ( 268 kB)
- [ 0.000000] .bss : 0xc06a4e00 - 0xc06e5060 ( 257 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000018] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
- [ 0.000227] Console: colour dummy device 80x30
- [ 0.000244] Calibrating delay loop... 1007.61 BogoMIPS (lpj=5038080)
- [ 0.090126] pid_max: default: 32768 minimum: 301
- [ 0.090209] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.090218] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.090616] CPU: Testing write buffer coherency: ok
- [ 0.090837] Setting up static identity map for 0x404313b8 - 0x40431404
- [ 0.091615] devtmpfs: initialized
- [ 0.092207] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 0.092451] xor: measuring software checksum speed
- [ 0.190071] arm4regs : 1256.800 MB/sec
- [ 0.290070] 8regs : 1084.000 MB/sec
- [ 0.390070] 32regs : 898.000 MB/sec
- [ 0.490067] neon : 1832.400 MB/sec
- [ 0.490073] xor: using function: neon (1832.400 MB/sec)
- [ 0.490172] pinctrl core: initialized pinctrl subsystem
- [ 0.490426] regulator-dummy: no parameters
- [ 0.493939] NET: Registered protocol family 16
- [ 0.494462] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.494989] cpuidle: using governor ladder
- [ 0.495000] cpuidle: using governor menu
- [ 0.497557] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.670160] raid6: int32x1 215 MB/s
- [ 0.840187] raid6: int32x2 338 MB/s
- [ 1.010153] raid6: int32x4 342 MB/s
- [ 1.180199] raid6: int32x8 329 MB/s
- [ 1.350102] raid6: neonx1 1425 MB/s
- [ 1.520104] raid6: neonx2 1843 MB/s
- [ 1.690074] raid6: neonx4 1919 MB/s
- [ 1.860082] raid6: neonx8 707 MB/s
- [ 1.860088] raid6: using algorithm neonx4 (1919 MB/s)
- [ 1.860093] raid6: using intx1 recovery algorithm
- [ 1.860286] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
- [ 1.860303] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
- [ 1.860325] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
- [ 1.860336] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
- [ 1.860489] vcc3v0: 3000 mV
- [ 1.860667] vcc3v3: 3300 mV
- [ 1.860728] reg-fixed-voltage emac-3v3: could not find pctldev for node /soc@01c0000
- 0/pinctrl@01c20800/emac_power_pin@0, deferring probe
- [ 1.860741] platform emac-3v3: Driver reg-fixed-voltage requests probe deferral
- [ 1.861143] SCSI subsystem initialized
- [ 1.861299] libata version 3.00 loaded.
- [ 1.861577] usbcore: registered new interface driver usbfs
- [ 1.861634] usbcore: registered new interface driver hub
- [ 1.861720] usbcore: registered new device driver usb
- [ 1.861844] pps_core: LinuxPPS API ver. 1 registered
- [ 1.861851] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.861874] PTP clock support registered
- [ 1.862136] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.863116] Switched to clocksource timer
- [ 1.863377] FS-Cache: Loaded
- [ 1.866851] cfg80211: Calling CRDA to update world regulatory domain
- [ 1.870617] NET: Registered protocol family 2
- [ 1.871179] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- [ 1.871226] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
- [ 1.871265] TCP: Hash tables configured (established 4096 bind 4096)
- [ 1.871315] TCP: reno registered
- [ 1.871326] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 1.871340] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 1.871450] NET: Registered protocol family 1
- [ 1.871678] RPC: Registered named UNIX socket transport module.
- [ 1.871686] RPC: Registered udp transport module.
- [ 1.871691] RPC: Registered tcp transport module.
- [ 1.871696] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.872777] futex hash table entries: 256 (order: -1, 3072 bytes)
- [ 1.882498] NFS: Registering the id_resolver key type
- [ 1.882555] Key type id_resolver registered
- [ 1.882561] Key type id_legacy registered
- [ 1.882578] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 1.882586] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 1.883600] ntfs: driver 2.1.30 [Flags: R/O].
- [ 1.883898] fuse init (API version 7.23)
- [ 1.884609] msgmni has been set to 1001
- [ 1.885760] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- [ 1.885774] io scheduler noop registered
- [ 1.885784] io scheduler deadline registered
- [ 1.885816] io scheduler cfq registered (default)
- [ 1.885998] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
- [ 1.887394] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
- [ 1.931523] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- [ 1.933855] console [ttyS0] disabled
- [ 1.954002] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 27, base_baud = 1500000) is a U6_16550A
- [ 2.601251] console [ttyS0] enabled
- [ 2.608218] loop: module loaded
- [ 2.673156] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
- [ 2.680638] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
- [ 2.686520] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
- [ 2.695481] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
- [ 2.704288] scsi0 : ahci_platform
- [ 2.707898] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 21
- [ 2.716738] platform 1c0b080.mdio: Driver sun4i-mdio requests probe deferral
- [ 2.724152] sun4i-emac 1c0b000.ethernet: using random MAC address 3e:e7:df:98:95:b9
- [ 2.733725] sun4i-emac 1c0b000.ethernet: eth0: at e08be000, IRQ 17 MAC: 3e:e7:df:98:95:b9
- [ 2.741999] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.748543] ehci-platform: EHCI generic platform driver
- [ 2.753865] platform 1c14000.usb: Driver ehci-platform requests probe deferral
- [ 2.761123] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
- [ 2.768407] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.774609] ohci-platform: OHCI generic platform driver
- [ 2.779894] platform 1c14400.usb: Driver ohci-platform requests probe deferral
- [ 2.787160] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
- [ 2.794496] usbcore: registered new interface driver cdc_acm
- [ 2.800145] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 2.808221] usbcore: registered new interface driver usblp
- [ 2.813773] usbcore: registered new interface driver usb-storage
- [ 2.820155] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
- [ 2.826954] sunxi-rtc 1c20d00.rtc: RTC enabled
- [ 2.831444] i2c /dev entries driver
- [ 2.835802] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
- [ 2.844066] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
- [ 2.849941] sunxi-mmc 1c0f000.mmc: Got CD GPIO #225.
- [ 2.893143] sunxi-mmc 1c0f000.mmc: base:0xe08c6000 irq:18
- [ 2.899662] usbcore: registered new interface driver usbhid
- [ 2.905253] usbhid: USB HID core driver
- [ 2.910254] specify port
- [ 2.913931] snd_mpu401: probe of snd_mpu401.0 failed with error -22
- [ 2.922588] usbcore: registered new interface driver snd-usb-audio
- [ 2.928825] Netfilter messages via NETLINK v0.30.
- [ 2.933558] nf_conntrack version 0.5.0 (8009 buckets, 32036 max)
- [ 2.940030] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
- [ 2.946602] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
- [ 2.955177] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.962659] arp_tables: (C) 2002 David S. Miller
- [ 2.967374] TCP: cubic registered
- [ 2.970699] Initializing XFRM netlink socket
- [ 2.975012] NET: Registered protocol family 17
- [ 2.979532] Bridge firewalling registered
- [ 2.983618] 8021q: 802.1Q VLAN Support v1.8
- [ 2.987832] Key type dns_resolver registered
- [ 2.992220] ThumbEE CPU extension supported.
- [ 2.996536] Registering SWP/SWPB emulation handler
- [ 3.003795] Btrfs loaded
- [ 3.006867] usb1-vbus: 5000 mV
- [ 3.010322] usb2-vbus: 5000 mV
- [ 3.013772] emac-3v3: 3300 mV
- [ 3.016838] mmc0: host does not support reading read-only switch. assuming write-enable.
- [ 3.025572] libphy: sun4i_mii_bus: probed
- [ 3.029584] sun4i-mdio 1c0b080.mdio-mii: /soc@01c00000/mdio@01c0b080/ethernet-phy@1 has invalid PHY address
- [ 3.039337] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 0
- [ 3.050286] mmc0: new high speed SDHC card at address e624
- [ 3.056065] mmcblk0: mmc0:e624 SU16G 14.8 GiB
- [ 3.062653] mmcblk0: p1 p2
- [ 3.065500] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.077974] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10002, max UDMA/133
- [ 3.084862] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- [ 3.091666] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 1
- [ 3.104869] ata1.00: configured for UDMA/133
- [ 3.109395] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
- [ 3.118130] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 3.125800] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 3.131260] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 3.137119] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 2
- [ 3.144301] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.149091] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 3.154212] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.190457] sda: sda1 sda2
- [ 3.193316] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 3
- [ 3.201096] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.233131] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 4
- [ 3.273128] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 5
- [ 3.313131] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 6
- [ 3.353127] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 7
- [ 3.393127] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 8
- [ 3.433127] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 9
- [ 3.473128] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 10
- [ 3.513128] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 11
- [ 3.553128] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 12
- [ 3.593128] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 13
- [ 3.633128] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 14
- [ 3.673128] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 15
- [ 3.713127] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 16
- [ 3.753127] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 17
- [ 3.793127] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 18
- [ 3.833127] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 19
- [ 3.873127] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 20
- [ 3.913128] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 21
- [ 3.953127] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 22
- [ 3.993131] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 23
- [ 4.033130] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 24
- [ 4.073127] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 25
- [ 4.113128] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 26
- [ 4.153128] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 27
- [ 4.193128] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 28
- [ 4.233128] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 29
- [ 4.273127] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 30
- [ 4.313127] sun4i-mdio 1c0b080.mdio-mii: scan phy ethernet-phy at address 31
- [ 4.353374] ehci-platform 1c14000.usb: EHCI Host Controller
- [ 4.358958] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
- [ 4.366800] ehci-platform 1c14000.usb: irq 19, io mem 0x01c14000
- [ 4.383141] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
- [ 4.389842] hub 1-0:1.0: USB hub found
- [ 4.393639] hub 1-0:1.0: 1 port detected
- [ 4.397997] ehci-platform 1c1c000.usb: EHCI Host Controller
- [ 4.403597] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
- [ 4.411416] ehci-platform 1c1c000.usb: irq 22, io mem 0x01c1c000
- [ 4.433136] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
- [ 4.439775] hub 2-0:1.0: USB hub found
- [ 4.443555] hub 2-0:1.0: 1 port detected
- [ 4.447872] ohci-platform 1c14400.usb: Generic Platform OHCI controller
- [ 4.454512] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
- [ 4.462302] ohci-platform 1c14400.usb: irq 20, io mem 0x01c14400
- [ 4.527674] hub 3-0:1.0: USB hub found
- [ 4.531438] hub 3-0:1.0: 1 port detected
- [ 4.535774] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
- [ 4.542400] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
- [ 4.550253] ohci-platform 1c1c400.usb: irq 23, io mem 0x01c1c400
- [ 4.617680] hub 4-0:1.0: USB hub found
- [ 4.621442] hub 4-0:1.0: 1 port detected
- [ 4.625701] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01 00:00:09 UTC (1262304009)
- [ 4.637077] vcc3v0: disabling
- [ 4.640146] ALSA device list:
- [ 4.643156] No soundcards found.
- [ 4.647844] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
- [ 4.657805] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
- [ 4.686922] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.695059] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- [ 4.713176] usb 1-1: new high-speed USB device number 2 using ehci-platform
- [ 4.725869] devtmpfs: mounted
- [ 4.729021] Freeing unused kernel memory: 152K (c063b000 - c0661000)
- [ 4.865491] hub 1-1:1.0: USB hub found
- [ 4.870082] hub 1-1:1.0: 4 ports detected
- Mount failed for selinuxfs on /sys/fs/selinux: No such file or directory
- INIT: version 2.88 booting
- [ 4.993219] usb 2-1: new high-speed USB device number 2 using ehci-platform
- [info] Using makefile-style concurrent boot in runlevel S.
- [ 5.223480] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
- [ 5.344260] hub 1-1.1:1.0: USB hub found
- [ 5.349957] hub 1-1.1:1.0: 4 ports detected
- [ 5.433494] usb 1-1.2: new full-speed USB device number 4 using ehci-platform
- [....] Starting the hotplug events dispatcher: udevd[ 5.594524] systemd-udevd[167]: starting version 208
- [ 5.613491] usb 1-1.2: new high-speed USB device number 5 using ehci-platform
- [ ok [ 5.648132] random: udevd urandom read with 41 bits of entropy available
- .
- [....] Synthesizing the initial hotplug events...[ 5.765425] input: Schiit Schiit USB Audio Device as /devices/soc@01c00000/1c14000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:0D8C:1319.0001/input/input0
- [ 5.809942] hid-generic 0003:0D8C:1319.0001: input: USB HID v1.00 Device [Schiit Schiit USB Audio Device] on usb-1c14000.usb-1.2/input2
- [ 5.923380] usb 1-1.1.1: new high-speed USB device number 6 using ehci-platform
- done.
- [....] Waiting for /dev to be fully populated...[ 6.054638] hub 1-1.1.1:1.0: USB hub found
- [ 6.077836] hub 1-1.1.1:1.0: 4 ports detected
- [ 6.203432] usb 1-1.1.3: new high-speed USB device number 7 using ehci-platform
- [ 6.346163] usb-storage 1-1.1.3:1.0: USB Mass Storage device detected
- [ 6.425842] scsi1 : usb-storage 1-1.1.3:1.0
- [ 6.543360] usb 1-1.1.4: new high-speed USB device number 8 using ehci-platform
- [ 6.565414] rtl8192cu: Chip version 0x10
- [ 6.690213] rtl8192cu: MAC address: 00:a8:54:83:89:1b
- [ 6.695313] rtl8192cu: Board Type 0
- [ 6.704260] hub 1-1.1.4:1.0: USB hub found
- [ 6.714876] hub 1-1.1.4:1.0: 4 ports detected
- [ 6.738008] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
- [ 6.769970] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
- [ 6.800345] usbcore: registered new interface driver rtl8192cu
- [ 6.809079] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
- [ 6.836098] rtlwifi: wireless switch is on
- done.
- [ 7.457308] scsi 1:0:0:0: Direct-Access Seagate Backup+ BL 0836 PQ: 0 ANS
- I: 6
- [ 7.486249] sd 1:0:0:0: [sdb] 1953525167 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 7.495400] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 7.509131] sd 1:0:0:0: [sdb] Write Protect is off
- [ 7.513965] sd 1:0:0:0: [sdb] Mode Sense: 2b 00 10 08
- [ 7.540379] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 7.572544] sdb: sdb1
- [ 7.580744] sd 1:0:0:0: [sdb] Attached SCSI disk
- ^[[B[....] Activating swap...[ 7.758060] Adding 1175252k swap on /dev/sda2. Priority:-1 extents:1 across:1175252k
- done.
- [ 7.838413] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- [....] Checking root file system...fsck from util-linux 2.20.1
- /dev/mmcblk0p2: clean, 56116/972944 files, 663933/3885568 blocks
- [ 7.922323] random: nonblocking pool is initialized
- done.
- [ 7.994700] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- [ ok ] Activating lvm and md swap...done.
- [....] Checking file systems...fsck from util-linux 2.20.1
- /dev/sdb1: recovering journal
- /dev/sda1: recovering journal
- /dev/sdb1: clean, 115546/61054976 files, 177528457/244190638 blocks
- /dev/sda1: clean, 157589/60981248 files, 194414086/243896576 blocks
- [ done.
- [ ok ] Cleaning up temporary files... /tmp.
- [info] Loading kernel module lp.
- modprobe: FATAL: Module lp not found.
- [info] Loading kernel module ppdev.
- modprobe: FATAL: Module ppdev not found.
- [info] Loading kernel module parport_pc.
- modprobe: FATAL: Module parport_pc not found.
- [ 10.727258] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 10.831426] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
- [ ok ] Mounting local filesystems...done.
- [ ok ] Activating swapfile swap...done.
- [ ok ] Cleaning up temporary files....
- [ ok ] Setting kernel variables ...done.
- [ 14.203147] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
- [....] Configuring network interfaces...[ 17.638943] rtl8192cu: MAC auto ON okay!
- [ 17.676245] rtl8192cu: Tx queue select: 0x05
- done.
- rpcbind: cannot create socket for udp6
- rpcbind: cannot create socket for tcp6
- [ ok ] Starting rpcbind daemon....
- [ ok ] Starting NFS common utilities: statd idmapd.
- [ ok ] Cleaning up temporary files....
- [ ok ] Setting up ALSA...done.
- [ ok ] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix.
- INIT: Entering runlevel: 2
- [info] Using makefile-style concurrent boot in runlevel 2.
- [ 19.572457] rtl8192cu: MAC auto ON okay!
- [ 19.628230] rtl8192cu: Tx queue select: 0x05
- [ ok ] Starting UPnP devices daemon: MiniSSDPd.
- [ 20.173275] cfg80211: Calling CRDA to update world regulatory domain
- [ 20.208265] cfg80211: World regulatory domain updated:
- [ 20.213455] cfg80211: DFS Master region: unset
- [ 20.217806] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 20.227551] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 20.235559] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 20.243559] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 20.251596] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 20.259656] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 20.267661] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 20.323184] cfg80211: Calling CRDA for country: US
- [ 20.340423] cfg80211: Regulatory domain changed to country: US
- [ 20.346310] cfg80211: DFS Master region: unset
- [ 20.350711] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 20.360526] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
- [ 20.368538] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
- [ 20.376540] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
- [ 20.384539] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
- [ 20.392531] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
- [ ok ] Starting advanced IEEE 802.11 management: hostapd.
- [ ok ] Starting NFS common utilities: statd idmapd.
- [ ok ] Starting NetBIOS name server: nmbd.
- [info] Already running: rcpbind.
- [ ok ] Starting enhanced syslogd: rsyslogd.
- [ ok ] Starting Common Unix Printing System: cupsd.
- [ ok ] Starting system message bus: dbus.
- [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
- [ ok ] Starting DNS forwarder and DHCP server: dnsmasq.
- [ ok ] Starting periodic command scheduler: cron.
- [ ok ] Starting CUPS Bonjour daemon: cups-browsed.
- [ ok ] Starting Music Player Daemon: mpd.
- [ 28.456695] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
- [ 28.466627] NFSD: starting 90-second grace period (net c069e5a8)
- [ ok ] Exporting directories for NFS kernel daemon....
- [....] Starting NFS kernel daemon: nfsdrpc.nfsd: address family inet6 not supported by protocol TCP
- mountdrpc.mountd: svc_tli_create: could not open connection for udp6
- rpc.mountd: svc_tli_create: could not open connection for tcp6
- rpc.mountd: svc_tli_create: could not open connection for udp6
- rpc.mountd: svc_tli_create: could not open connection for tcp6
- rpc.mountd: svc_tli_create: could not open connection for udp6
- rpc.mountd: svc_tli_create: could not open connection for tcp6
- . ok
- saned disabled; edit /etc/default/saned
- [ ok ] Starting SMB/CIFS daemon: smbd.
- [ ok ] Starting OpenBSD Secure Shell server: sshd.
- [ ok ] Starting bittorrent daemon: transmission-daemon.
- [ ok ] Starting upnp media server: mediatomb.
- Debian GNU/Linux jessie/sid earlgrey ttyS0
- earlgrey login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement