PW3 diags problem

U-Boot 2009.08-lab126 (Apr 15 2015 - 07:37:55)

CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature:   29 C, calibration data 0x5574df5f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock     : 66000000Hz
ipg per clock : 66000000Hz
uart clock    : 80000000Hz
cspi clock    : 60000000Hz
ahb clock     : 132000000Hz
axi clock   : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock     : 396000000Hz
usdhc1 clock  : 198000000Hz
usdhc2 clock  : 198000000Hz
usdhc3 clock  : 198000000Hz
usdhc4 clock  : 198000000Hz
MMC:  FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Muscat WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 06702091533301TJ
S/N: G090G10553360JXK
I2C:   ready
DRAM:  512 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Quick Memory Test 0x80000000, 0x1fff0000
POST done in 111 ms
Battery voltage: 4007 mV

Hit any key to stop autoboot:  1  0
uboot > bootm 0xE41000
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   Linux-3.0.35-lab126
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2634932 Bytes =  2.5 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.098663] No Legacy reboot reason code to print
[    0.289394] LPDDR2 MfgId: 0x5 [Nanya]
[    0.293083]
[    0.293087] just text: vaddr c0150d44, va 0xc0150200 pa 0x801000c3 attr 0x6
[    0.305626]
[    0.305629] nmx6sl_wfi_iram: vaddr e084e000, va 0xe084e200 pa 0x904043 attr 0x2
[    0.314515]
[    0.314518] mx6sl_ddr: vaddr e0856000, va 0xe0856200 pa 0x905043 attr 0x2
[    0.322864]
[    0.322867] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[    0.333645]
[    0.333648] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[    0.347059]
[    0.347063] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[    0.357032]
[    0.357035] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[    0.370467]
[    0.370470] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[    0.380363]
[    0.380367] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Mon Jun 1 23:54:30 PDT 2015 armv7l
Press [ENTER] for recovery menu...       0 //dev/mmcblk0p4:
CHS=4/16/99776 size=3269459968 bytes
flag type      first       last  lba first   lba size
Partition p1:
0x00 0x0b         16 <large>            16    6385648
    CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
init started: BusyBox v1.17.1 (2015-06-01 23:47:53 PDT)
starting pid 641, tty '': '/etc/init.d/rcS'
/etc/init.d/rcS: line 85: boot_milestone: not found
system: I rcS:def:starting /etc/rcS.d/S50diags
USER=root
prevlevel=N
HOME=/
runlevel=S
TERM=vt102
PATH=/sbin:/bin:/usr/sbin:/usr/bin
SHELL=/bin/sh
PWD=/
VERBOSE=no
READ_AHEAD=4
USER=root
prevlevel=N
HOME=/
runlevel=S
TERM=vt102
PATH=/sbin:/bin:/usr/sbin:/usr/bin
SHELL=/bin/sh
PWD=/
VERBOSE=no
IO_SCHED=anticipatory
USER=root
prevlevel=N
HOME=/
runlevel=S
TERM=vt102
PATH=/sbin:/bin:/usr/sbin:/usr/bin
SHELL=/bin/sh
PWD=/
VERBOSE=no
TMP_SIZE=32M
info firsttime:mount_rw:time=6460:Mounting root RW for first boot
info firsttime:cursor:Linking Xorg cursor:
ln: /usr/share/fonts/X11/misc/cursor.pcf: No such file or directory
info firsttime:mount_ro:time=6490:Mounting root RO
[    6.559805] elevator: type
[    6.559810]  not found
[    6.564962] elevator: switch to
[    6.564966]  failed
[    6.578837] elevator: type
[    6.578843]  not found
[    6.583997] elevator: switch to
[    6.584000]  failed
[    6.597804] elevator: type
[    6.597809]  not found
[    6.602964] elevator: switch to
[    6.602968]  failed
info system:start:time=6600:
/etc/rcS.d/S50diags: line 496: f_proto: not found
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=wario,board=muscat,rev=2,proto=N,wifi=Y,wan=N:
info system:done:time=7030:
info cyttsp4:update:cyttsp4 fw ver=000E file version=000E:
/etc/rcS.d/S50diags: line 496: iptables-restore: not found
/opt/ar6k/include/dbglog.h.save: No such file or directory
info userstore:run:time=8340,action=start:
info userstore:start:found_bootup_flag:Found BOOTUP flag file
dosfsck 2.11 (12 Mar 2005)
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
Checking we can access the last sector of the filesystem
Boot sector contents:
System ID "mkdosfs"
Media byte 0xf8 (hard disk)
       512 bytes per logical sector
      8192 bytes per cluster
      2134 reserved sectors
First FAT starts at byte 1092608 (sector 2134)
         2 FATs, 32 bit entries
   1594880 bytes per FAT (= 3115 sectors)
Root directory start at cluster 2 (arbitrary size)
Data area starts at byte 4282368 (sector 8364)
    398580 data clusters (3265167360 bytes)
32 sectors/track, 64 heads
         0 hidden sectors
   6385648 sectors total
Checking for unused clusters.
Checking free cluster summary.
/dev/loop/0: 40 files, 52060/398580 clusters
Wifi cal bin symbolic link AR6003_calfile.bin is already created
system: I mntroot:def:Making root filesystem writeable
ln: /usr/local/sbin/dropbear: File exists
ln: /usr/local/sbin/dropbearkey: File exists
/etc/rcS.d/S50diags: line 13: /usr/local/sbin/dropbearkey: not found
system: I mntroot:def:Making root filesystem read-only
/etc/rcS.d/S50diags: line 13: /usr/local/sbin/dropbear: not found
mounting waveform filesystem
waveform filesystem already mounted
info display:update:Checking '/opt/eink/images/R046_ED060KD1C1' for overrides:
umounting waveform filesystem
drawing default
cannot find image: /opt/amazon/low_level_screens/splash.png
info display:started:time=9410:
/etc/upstart/battery-diags: line 91: f_proto: not found
info battery:charged:cap=77,mV=4004,mAH=1140:
USER=root
prevlevel=N
OLDPWD=/
HOME=/
runlevel=S
TERM=vt102
PATH=/sbin:/bin:/usr/sbin:/usr/bin
SHELL=/bin/sh
PWD=/dev
VERBOSE=no
LD_LIBRARY_PATH=/usr/lib/tts/speech/components/common/:/usr/lib/tts
/etc/rcS.d/S50diags: line 13: kb: not found
diags : /opt/factory/rootfs_md5_list not found.
Change list is: [266370]
Sending: mkdir -p /mnt/base-us/diagnostic_logs/
PostMode len = 6 of 16
Ignoring PostMode
DiscoveryObjectImpl:getDeviceDiagsInfo FOUND: MUSCAT_WFO: [067] [103] with 06702091533301TJ
Device found: MUSCAT_WFO [067] [103]
GlobalHalImpl: found DeviceType: 0x67
found: cyttsp4_i2c
found: cyttsp4_core
found: cyttsp4_mt_b
[    9.601505] cyttsp4_device_access_init: Registering device access device for core_id: main_ttsp_core
[    9.611682] cyttsp4_device_access cyttsp4_device_access.main_ttsp_core: cyttsp4_device_access_probe
[    9.621694] cyttsp4_device_access_init: Cypress TTSP Device Access (Built 20121109) rc=0
Input driver version is 1.0.1
Input device ID: bus 0x0 vendor 0x0 product 0x0 version 0x0
Input device name: "max77696-onkey"
Supported events:
Input driver version is 1.0.1
Input device ID: bus 0x0 vendor 0x0 product 0x0 version 0x0
Input device name: "cyttsp4_mt"
Supported events:
 failed to open /dev/input/event2
 failed to open /dev/input/event3
 failed to open /dev/input/event4
 failed to open /dev/input/event5
 failed to open /dev/input/event6
 failed to open /dev/input/event7
Ignoring PostMode
diag>open_device m_vsInfo.xres: 1072
get_m_test_xmlFile wfo.xml
	device type = 0x67
	PCBID: 06702091533301TJ
	TCP_IP_Server_Handler:start_USBnet Enabling USB net
Cannot open xmlFile /mnt/base-us/USBnet.xml
NOT Found NFS path
[    9.815990] unregistered gadget driver 'g_file_storage'
ERROR: Module g_serial does not exist in /proc/modules
[    9.871954] usb0: MAC ee:59:00:00:00:15
[    9.875798] usb0: HOST MAC ee:29:00:00:00:15
[    9.893385] g_ether gadget: controller 'fsl-usb2-udc' not recognized; trying CDC Ethernet (ECM)
[    9.916429] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[    9.923064] g_ether gadget: g_ether ready
[    9.930433] fsl-usb2-udc: bind to driver g_ether
system: I mntroot:def:Making root filesystem writeable
[    9.984544] EXT3-fs (mmcblk0p2): using internal journal


U-Boot 2009.08-lab126 (Apr 15 2015 - 07:37:55)

CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature:   33 C, calibration data 0x5574df5f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock     : 66000000Hz
ipg per clock : 66000000Hz
uart clock    : 80000000Hz
cspi clock    : 60000000Hz
ahb clock     : 132000000Hz
axi clock   : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock     : 396000000Hz
usdhc1 clock  : 198000000Hz
usdhc2 clock  : 198000000Hz
usdhc3 clock  : 198000000Hz
usdhc4 clock  : 198000000Hz
MMC:  FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Muscat WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 06702091533301TJ
S/N: G090G10553360JXK
I2C:   ready
DRAM:  512 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Quick Memory Test 0x80000000, 0x1fff0000
POST done in 111 ms
Battery voltage: 4005 mV

Hit any key to stop autoboot:  1  0
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   Linux-3.0.35-lab126
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2634464 Bytes =  2.5 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...