Advertisement
Guest User

smart sdb

a guest
Oct 16th, 2012
338
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.75 KB | None | 0 0
  1. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.4.10] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda 7200.11
  6. Device Model: ST31500341AS
  7. Serial Number: 9VS3G1XN
  8. LU WWN Device Id: 5 000c50 01f9175c6
  9. Firmware Version: CC1H
  10. User Capacity: 1,500,301,910,016 bytes [1.50 TB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 8
  14. ATA Standard is: ATA-8-ACS revision 4
  15. Local Time is: Tue Oct 16 21:35:01 2012 CEST
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21.  
  22. General SMART Values:
  23. Offline data collection status: (0x82) Offline data collection activity
  24. was completed without error.
  25. Auto Offline Data Collection: Enabled.
  26. Self-test execution status: ( 0) The previous self-test routine completed
  27. without error or no self-test has ever
  28. been run.
  29. Total time to complete Offline
  30. data collection: ( 609) seconds.
  31. Offline data collection
  32. capabilities: (0x7b) SMART execute Offline immediate.
  33. Auto Offline data collection on/off support.
  34. Suspend Offline collection upon new
  35. command.
  36. Offline surface scan supported.
  37. Self-test supported.
  38. Conveyance Self-test supported.
  39. Selective Self-test supported.
  40. SMART capabilities: (0x0003) Saves SMART data before entering
  41. power-saving mode.
  42. Supports SMART auto save timer.
  43. Error logging capability: (0x01) Error logging supported.
  44. General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time: ( 1) minutes.
  47. Extended self-test routine
  48. recommended polling time: ( 255) minutes.
  49. Conveyance self-test routine
  50. recommended polling time: ( 2) minutes.
  51. SCT capabilities: (0x103f) SCT Status supported.
  52. SCT Error Recovery Control supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 10
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 79940048
  60. 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
  61. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 6
  62. 5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 53
  63. 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 4839697502
  64. 9 Power_On_Hours 0x0032 075 075 000 Old_age Always - 22369
  65. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  66. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 6
  67. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  68. 187 Reported_Uncorrect 0x0032 055 055 000 Old_age Always - 45
  69. 188 Command_Timeout 0x0032 098 098 000 Old_age Always - 648549957791
  70. 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 282
  71. 190 Airflow_Temperature_Cel 0x0022 052 048 045 Old_age Always - 48 (Min/Max 45/52)
  72. 194 Temperature_Celsius 0x0022 048 052 000 Old_age Always - 48 (0 21 0 0)
  73. 195 Hardware_ECC_Recovered 0x001a 049 021 000 Old_age Always - 79940048
  74. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 35
  75. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 35
  76. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  77. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 271407573391201
  78. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 803011607
  79. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2147520850
  80.  
  81. SMART Error Log Version: 1
  82. ATA Error Count: 38 (device log contains only the most recent five errors)
  83. CR = Command Register [HEX]
  84. FR = Features Register [HEX]
  85. SC = Sector Count Register [HEX]
  86. SN = Sector Number Register [HEX]
  87. CL = Cylinder Low Register [HEX]
  88. CH = Cylinder High Register [HEX]
  89. DH = Device/Head Register [HEX]
  90. DC = Device Command Register [HEX]
  91. ER = Error register [HEX]
  92. ST = Status register [HEX]
  93. Powered_Up_Time is measured from power on, and printed as
  94. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  95. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  96.  
  97. Error 38 occurred at disk power-on lifetime: 22363 hours (931 days + 19 hours)
  98. When the command that caused the error occurred, the device was active or idle.
  99.  
  100. After command completion occurred, registers were:
  101. ER ST SC SN CL CH DH
  102. -- -- -- -- -- -- --
  103. 40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
  104.  
  105. Commands leading to the command that caused the error were:
  106. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  107. -- -- -- -- -- -- -- -- ---------------- --------------------
  108. 61 00 08 ff ff ff 4f 00 5d+14:01:20.295 WRITE FPDMA QUEUED
  109. 61 00 20 ff ff ff 4f 00 5d+14:01:20.294 WRITE FPDMA QUEUED
  110. 61 00 08 ff ff ff 4f 00 5d+14:01:20.293 WRITE FPDMA QUEUED
  111. 61 00 01 d1 81 07 40 00 5d+14:01:20.293 WRITE FPDMA QUEUED
  112. 60 00 20 ff ff ff 4f 00 5d+14:01:20.293 READ FPDMA QUEUED
  113.  
  114. Error 37 occurred at disk power-on lifetime: 22363 hours (931 days + 19 hours)
  115. When the command that caused the error occurred, the device was active or idle.
  116.  
  117. After command completion occurred, registers were:
  118. ER ST SC SN CL CH DH
  119. -- -- -- -- -- -- --
  120. 40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
  121.  
  122. Commands leading to the command that caused the error were:
  123. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  124. -- -- -- -- -- -- -- -- ---------------- --------------------
  125. 61 00 08 ff ff ff 4f 00 5d+14:01:17.071 WRITE FPDMA QUEUED
  126. 61 00 10 ff ff ff 4f 00 5d+14:01:17.070 WRITE FPDMA QUEUED
  127. 61 00 08 ff ff ff 4f 00 5d+14:01:17.070 WRITE FPDMA QUEUED
  128. 61 00 08 ff ff ff 4f 00 5d+14:01:17.069 WRITE FPDMA QUEUED
  129. 60 00 08 ff ff ff 4f 00 5d+14:01:17.063 READ FPDMA QUEUED
  130.  
  131. Error 36 occurred at disk power-on lifetime: 22363 hours (931 days + 19 hours)
  132. When the command that caused the error occurred, the device was active or idle.
  133.  
  134. After command completion occurred, registers were:
  135. ER ST SC SN CL CH DH
  136. -- -- -- -- -- -- --
  137. 40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
  138.  
  139. Commands leading to the command that caused the error were:
  140. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  141. -- -- -- -- -- -- -- -- ---------------- --------------------
  142. 61 00 08 ff ff ff 4f 00 5d+14:01:13.819 WRITE FPDMA QUEUED
  143. 61 00 01 4d 82 07 40 00 5d+14:01:13.818 WRITE FPDMA QUEUED
  144. 61 00 08 ff ff ff 4f 00 5d+14:01:13.817 WRITE FPDMA QUEUED
  145. 61 00 08 ff ff ff 4f 00 5d+14:01:13.817 WRITE FPDMA QUEUED
  146. 61 00 08 ff ff ff 4f 00 5d+14:01:13.816 WRITE FPDMA QUEUED
  147.  
  148. Error 35 occurred at disk power-on lifetime: 22363 hours (931 days + 19 hours)
  149. When the command that caused the error occurred, the device was active or idle.
  150.  
  151. After command completion occurred, registers were:
  152. ER ST SC SN CL CH DH
  153. -- -- -- -- -- -- --
  154. 40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
  155.  
  156. Commands leading to the command that caused the error were:
  157. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  158. -- -- -- -- -- -- -- -- ---------------- --------------------
  159. 61 00 04 ff ff ff 4f 00 5d+13:47:19.429 WRITE FPDMA QUEUED
  160. 61 00 20 ff ff ff 4f 00 5d+13:47:19.427 WRITE FPDMA QUEUED
  161. 61 00 10 ff ff ff 4f 00 5d+13:47:19.425 WRITE FPDMA QUEUED
  162. 61 00 18 ff ff ff 4f 00 5d+13:47:19.425 WRITE FPDMA QUEUED
  163. 61 00 10 ff ff ff 4f 00 5d+13:47:19.425 WRITE FPDMA QUEUED
  164.  
  165. Error 34 occurred at disk power-on lifetime: 22363 hours (931 days + 19 hours)
  166. When the command that caused the error occurred, the device was active or idle.
  167.  
  168. After command completion occurred, registers were:
  169. ER ST SC SN CL CH DH
  170. -- -- -- -- -- -- --
  171. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  172.  
  173. Commands leading to the command that caused the error were:
  174. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  175. -- -- -- -- -- -- -- -- ---------------- --------------------
  176. 60 00 20 ff ff ff 4f 00 5d+13:47:16.292 READ FPDMA QUEUED
  177. 61 00 08 ff ff ff 4f 00 5d+13:47:16.285 WRITE FPDMA QUEUED
  178. 60 00 08 ff ff ff 4f 00 5d+13:47:16.280 READ FPDMA QUEUED
  179. 61 00 01 10 ac 00 40 00 5d+13:47:16.280 WRITE FPDMA QUEUED
  180. 60 00 08 ff ff ff 4f 00 5d+13:47:16.279 READ FPDMA QUEUED
  181.  
  182. SMART Self-test log structure revision number 1
  183. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  184. # 1 Extended offline Completed without error 00% 19270 -
  185.  
  186. SMART Selective self-test log data structure revision number 1
  187. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  188. 1 0 0 Not_testing
  189. 2 0 0 Not_testing
  190. 3 0 0 Not_testing
  191. 4 0 0 Not_testing
  192. 5 0 0 Not_testing
  193. Selective self-test flags (0x0):
  194. After scanning selected spans, do NOT read-scan remainder of disk.
  195. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement