SHOW:
|
|
- or go back to the newest paste.
1 | //daverig:/home/oquidave # ls -l /dev/ttyUSB* | |
2 | crw-rw---- 1 root dialout 188, 0 Dec 10 14:42 /dev/ttyUSB0 | |
3 | crw-rw---- 1 root dialout 188, 1 Dec 10 14:42 /dev/ttyUSB1 | |
4 | crw-rw---- 1 root dialout 188, 2 Dec 10 14:42 /dev/ttyUSB2 | |
5 | ||
6 | //dongle.conf | |
7 | [defaults] | |
8 | ; now you can set here any not required device settings as template | |
9 | ; sure you can overwrite in any [device] section this default values | |
10 | ||
11 | context=incoming-mobile ; context for incoming calls | |
12 | group=0 ; calling group | |
13 | rxgain=0 ; increase the incoming volume; may be negative | |
14 | txgain=0 ; increase the outgoint volume; may be negative | |
15 | autodeletesms=yes ; auto delete incoming sms | |
16 | resetdongle=yes ; reset dongle during initialization with ATZ command | |
17 | u2diag=-1 ; set ^U2DIAG parameter on device (0 = disable everything except modem function) ; -1 not use ^U2DIAG command | |
18 | usecallingpres=yes ; use the caller ID presentation or not | |
19 | callingpres=allowed_passed_screen ; set caller ID presentation by default use default network settings | |
20 | disablesms=no ; disable of SMS reading from device when received | |
21 | ; chan_dongle has currently a bug with SMS reception. When a SMS gets in during a | |
22 | ; call chan_dongle might crash. Enable this option to disable sms reception. | |
23 | ; default = no | |
24 | ||
25 | language=en ; set channel default language | |
26 | smsaspdu=yes ; if 'yes' send SMS in PDU mode, feature implementation incomplete and we strongly recommend say 'yes' | |
27 | mindtmfgap=45 ; minimal interval from end of previews DTMF from begining of next in ms | |
28 | mindtmfduration=80 ; minimal DTMF tone duration in ms | |
29 | mindtmfinterval=200 ; minimal interval between ends of DTMF of same digits in ms | |
30 | ||
31 | callwaiting=auto ; if 'yes' allow incoming calls waiting; by default use network settings | |
32 | ; if 'no' waiting calls just ignored | |
33 | disable=no ; OBSOLETED by initstate: if 'yes' no load this device and just ignore this section | |
34 | ||
35 | initstate=start ; specified initial state of device, must be one of 'stop' 'start' 'remote' | |
36 | ; 'remove' same as 'disable=yes' | |
37 | ||
38 | ;exten=123 ; exten for start incoming calls, only in case of Subscriber Number not available!, also set to CALLERID(ndid) | |
39 | ||
40 | dtmf=relax ; control of incoming DTMF detection, possible values: | |
41 | ; off | |
42 | [dongle0] | |
43 | audio=/dev/ttyUSB1 ; tty port for audio connection; no default value | |
44 | data=/dev/ttyUSB0 ; tty port for AT commands; no default value | |
45 | imei=869878001485498 | |
46 | imsi=641010211885457 | |
47 | ||
48 | ||
49 | //extensions.conf | |
50 | [local] | |
51 | ; | |
52 | ; Master context for local, toll-free, and iaxtel calls only | |
53 | ; | |
54 | ignorepat => 9 | |
55 | include => default | |
56 | include => trunklocal | |
57 | include => iaxtel700 | |
58 | include => trunktollfree | |
59 | include => iaxprovider | |
60 | include => dongle | |
61 | include => incoming-mobile | |
62 | ||
63 | [incoming-mobile] | |
64 | exten =>s,1,Answer() | |
65 | same=>n,Playback(hello-world) | |
66 | same=>n,Hangup() | |
67 | ||
68 | // | |
69 | daverig*CLI> dongle show device state dongle0 | |
70 | -------------- Status ------------- | |
71 | Device : dongle0 | |
72 | State : Free | |
73 | Audio : /dev/ttyUSB1 | |
74 | Data : /dev/ttyUSB0 | |
75 | Voice : Yes | |
76 | SMS : Yes | |
77 | Manufacturer : huawei | |
78 | Model : E173 | |
79 | Firmware : 11.126.16.00.846 | |
80 | IMEI : 869878001485498 | |
81 | IMSI : 641010211885457 | |
82 | GSM Registration Status : Registered, home network | |
83 | RSSI : 20, -113 dBm | |
84 | Mode : No Service | |
85 | Submode : No service | |
86 | Provider Name : AIRTEL UG | |
87 | Location area code : 1F42 | |
88 | Cell ID : 27 | |
89 | Subscriber Number : Unknown | |
90 | SMS Service Center : +25675010004 | |
91 | Use UCS-2 encoding : Yes | |
92 | USSD use 7 bit encoding : Yes | |
93 | USSD use UCS-2 decoding : No | |
94 | Tasks in queue : 0 | |
95 | Commands in queue : 0 | |
96 | Call Waiting : Disabled | |
97 | Current device state : start | |
98 | Desired device state : start | |
99 | When change state : now | |
100 | Calls/Channels : 0 | |
101 | Active : 0 | |
102 | Held : 0 | |
103 | Dialing : 0 | |
104 | Alerting : 0 | |
105 | Incoming : 0 | |
106 | Waiting : 0 | |
107 | Releasing : 0 | |
108 | - | Initializing : 0 |
108 | + | Initializing : 0 |
109 | ||
110 | //daverig*CLI> dongle show devices | |
111 | ID Group State RSSI Mode Submode Provider Name Model Firmware IMEI IMSI Number | |
112 | dongle0 0 Free 14 0 0 AIRTEL UG E173 11.126.16.00.846 869878001485498 641010211885457 +256752244156 |