View difference between Paste ID: qBqM9YR8 and t5mL03ZJ

 # An example configuration file for MPD
 # See the mpd.conf man page for a more detailed description of each parameter.
 
 
 # Files and directories #######################################################
 #
 # This setting controls the top directory which MPD will search to discover the
 # available audio files and add them to the daemon's online database. This
 # setting defaults to the XDG directory, otherwise the music directory will be
 # be disabled and audio files will only be accepted over ipc socket (using
 # file:// protocol) or streaming files over an accepted protocol.
 #
 music_directory		"/music"
 #
 # This setting sets the MPD internal playlist directory. The purpose of this
 # directory is storage for playlists created by MPD. The server will use
 # playlist files not created by the server but only if they are in the MPD
 # format. This setting defaults to playlist saving being disabled.
 #
 playlist_directory		"/var/lib/mpd/playlists"
 #
 # This setting sets the location of the MPD database. This file is used to
 # load the database at server start up and store the database while the
 # server is not up. This setting defaults to disabled which will allow
 # MPD to accept files over ipc socket (using file:// protocol) or streaming
 # files over an accepted protocol.
 #
 db_file			"/var/lib/mpd/tag_cache"
 #
 # These settings are the locations for the daemon log files for the daemon.
 # These logs are great for troubleshooting, depending on your log_level
 # settings.
 #
 # The special value "syslog" makes MPD use the local syslog daemon. This
 # setting defaults to logging to syslog, otherwise logging is disabled.
 #
 log_file			"/var/log/mpd/mpd.log"
 #
 # This setting sets the location of the file which stores the process ID
 # for use of mpd --kill and some init scripts. This setting is disabled by
 # default and the pid file will not be stored.
 #
 pid_file			"/var/run/mpd/pid"
 #
 # This setting sets the location of the file which contains information about
 # most variables to get MPD back into the same general shape it was in before
 # it was brought down. This setting is disabled by default and the server
 # state will be reset on server start up.
 #
 state_file			"/var/lib/mpd/state"
 #
 # The location of the sticker database.  This is a database which
 # manages dynamic information attached to songs.
 #
 sticker_file                   "/var/lib/mpd/sticker.sql"
 #
 ###############################################################################
 
 
 # General music daemon options ################################################
 #
 # This setting specifies the user that MPD will run as. MPD should never run as
 # root and you may use this setting to make MPD change its user ID after
 # initialization. This setting is disabled by default and MPD is run as the
 # current user.
 #
 user				"mpd"
 #
 # This setting specifies the group that MPD will run as. If not specified
 # primary group of user specified with "user" setting will be used (if set).
 # This is useful if MPD needs to be a member of group such as "audio" to
 # have permission to use sound card.
 #
-#group                          "nogroup"
+group                          "audio"
 #
 # This setting sets the address for the daemon to listen on. Careful attention
 # should be paid if this is assigned to anything other then the default, any.
 # This setting can deny access to control of the daemon. Choose any if you want
 # to have mpd listen on every address
 #
 # For network
 bind_to_address		"localhost"
 #
 # And for Unix Socket
 #bind_to_address		"/var/run/mpd/socket"
 #
 # This setting is the TCP port that is desired for the daemon to get assigned
 # to.
 #
 #port				"6600"
 #
 # This setting controls the type of information which is logged. Available
 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
 # argument is recommended for troubleshooting, though can quickly stretch
 # available resources on limited hardware storage.
 #
 #log_level			"default"
 #
 # If you have a problem with your MP3s ending abruptly it is recommended that
 # you set this argument to "no" to attempt to fix the problem. If this solves
 # the problem, it is highly recommended to fix the MP3 files with vbrfix
 # (available as vbrfix in the debian archive), at which
 # point gapless MP3 playback can be enabled.
 #
 #gapless_mp3_playback			"yes"
 #
 # This setting enables MPD to create playlists in a format usable by other
 # music players.
 #
 #save_absolute_paths_in_playlists	"no"
 #
 # This setting defines a list of tag types that will be extracted during the
 # audio file discovery process. Optionally, 'comment' can be added to this
 # list.
 #
 #metadata_to_use	"artist,album,title,track,name,genre,date,composer,performer,disc"
 #
 # This setting enables automatic update of MPD's database when files in
 # music_directory are changed.
 #
 #auto_update    "yes"
 #
 # Limit the depth of the directories being watched, 0 means only watch
 # the music directory itself.  There is no limit by default.
 #
 #auto_update_depth "3"
 #
 ###############################################################################
 
 
 # Symbolic link behavior ######################################################
 #
 # If this setting is set to "yes", MPD will discover audio files by following
 # symbolic links outside of the configured music_directory.
 #
 #follow_outside_symlinks	"yes"
 #
 # If this setting is set to "yes", MPD will discover audio files by following
 # symbolic links inside of the configured music_directory.
 #
 #follow_inside_symlinks		"yes"
 #
 ###############################################################################
 
 
 # Zeroconf / Avahi Service Discovery ##########################################
 #
 # If this setting is set to "yes", service information will be published with
 # Zeroconf / Avahi.
 #
 #zeroconf_enabled		"yes"
 #
 # The argument to this setting will be the Zeroconf / Avahi unique name for
 # this MPD server on the network.
 #
 #zeroconf_name			"Music Player"
 #
 ###############################################################################
 
 
 # Permissions #################################################################
 #
 # If this setting is set, MPD will require password authorization. The password
 # can setting can be specified multiple times for different password profiles.
 #
 #password                        "password@read,add,control,admin"
 #
 # This setting specifies the permissions a user has who has not yet logged in.
 #
 #default_permissions             "read,add,control,admin"
 #
 ###############################################################################
 
 
 # Input #######################################################################
 #
 
 input {
         plugin "curl"
 #       proxy "proxy.isp.com:8080"
 #       proxy_user "user"
 #       proxy_password "password"
 }
 
 #
 ###############################################################################
 
 # Audio Output ################################################################
 #
 # MPD supports various audio output types, as well as playing through multiple
 # audio outputs at the same time, through multiple audio_output settings
 # blocks. Setting this block is optional, though the server will only attempt
 # autodetection for one sound card.
 #
 # See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
 # other audio outputs.
 #
 # An example of an ALSA output:
 #
 #audio_output {
 #	type		"alsa"
 #	name		"My ALSA Device"
 #	device		"hw:0,0"	# optional
 #	format		"44100:16:2"	# optional
 #	mixer_device	"default"	# optional
 #	mixer_control	"PCM"		# optional
 #	mixer_index	"0"		# optional
 #}
 #
 # An example of an OSS output:
 #
 #audio_output {
 #	type		"oss"
 #	name		"My OSS Device"
 #	device		"/dev/dsp"	# optional
 #	format		"44100:16:2"	# optional
 #	mixer_device	"/dev/mixer"	# optional
 #	mixer_control	"PCM"		# optional
 #}
 #
 # An example of a shout output (for streaming to Icecast):
 #
 #audio_output {
 #	type		"shout"
 #	encoding	"ogg"			# optional
 #	name		"My Shout Stream"
 #	host		"localhost"
 #	port		"8000"
 #	mount		"/mpd.ogg"
 #	password	"hackme"
 #	quality		"5.0"
 #	bitrate		"128"
 #	format		"44100:16:1"
 #	protocol	"icecast2"		# optional
 #	user		"source"		# optional
 #	description	"My Stream Description"	# optional
 #	genre		"jazz"			# optional
 #	public		"no"			# optional
 #	timeout		"2"			# optional
 #}
 #
 # An example of a recorder output:
 #
 #audio_output {
 #       type            "recorder"
 #       name            "My recorder"
 #       encoder         "vorbis"                # optional, vorbis or lame
 #       path            "/var/lib/mpd/recorder/mpd.ogg"
 ##      quality         "5.0"                   # do not define if bitrate is defined
 #       bitrate         "128"                   # do not define if quality is defined
 #       format          "44100:16:1"
 #}
 #
 # An example of a httpd output (built-in HTTP streaming server):
 #
 #audio_output {
 #	type		"httpd"
 #	name		"My HTTP Stream"
 #	encoder		"vorbis"		# optional, vorbis or lame
 #	port		"8000"
 #	quality		"5.0"			# do not define if bitrate is defined
 #	bitrate		"128"			# do not define if quality is defined
 #	format		"44100:16:1"
 #}
 #
 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
 #
 #audio_output {
 #	type		"pulse"
 #	name		"My Pulse Output"
 #	server		"remote_server"		# optional
 #	sink		"remote_server_sink"	# optional
 #}
 audio_output {
 	type "pulse"
 	name "Local MPD Output"
 }
 #
 ## Example "pipe" output:
 #
 #audio_output {
 #	type		"pipe"
 #	name		"my pipe"
 #	command		"aplay -f cd 2>/dev/null"
 ## Or if you're want to use AudioCompress
 #	command		"AudioCompress -m | aplay -f cd 2>/dev/null"
 ## Or to send raw PCM stream through PCM:
 #	command		"nc example.org 8765"
 #	format		"44100:16:2"
 #}
 #
 ## An example of a null output (for no audio output):
 #
 #audio_output {
 #	type		"null"
 #	name		"My Null Output"
 #}
 #
 # This setting will change all decoded audio to be converted to the specified
 # format before being passed to the audio outputs. By default, this setting is
 # disabled.
 #
 #audio_output_format		"44100:16:2"
 #
 # If MPD has been compiled with libsamplerate support, this setting specifies
 # the sample rate converter to use.  Possible values can be found in the
 # mpd.conf man page or the libsamplerate documentation. By default, this is
 # setting is disabled.
 #
 #samplerate_converter		"Fastest Sinc Interpolator"
 #
 ###############################################################################
 
 
 # Volume control mixer ########################################################
 #
 # These are the global volume control settings. By default, this setting will
 # be detected to the available audio output device, with preference going to
 # hardware mixing. Hardware and software mixers for individual audio_output
 # sections cannot yet be mixed.
 #
 # An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
 # setting is used other sound applications will be affected by the volume
 # being controlled by MPD.
 #
 #mixer_type			"hardware"
 #
 # An example for controlling all mixers through software. This will control
 # all controls, even if the mixer is not supported by the device and will not
 # affect any other sound producing applications.
 #
 #mixer_type			"software"
 #
 # This example will not allow MPD to touch the mixer at all and will disable
 # all volume controls.
 #
 #mixer_type			"disabled"
 #
 ###############################################################################
 
 
 # Normalization automatic volume adjustments ##################################
 #
 # This setting specifies the type of ReplayGain to use. This setting can have
 # the argument "album" or "track". See <http://www.replaygain.org> for more
 # details. This setting is disabled by default.
 #
 #replaygain			"album"
 #
 # This setting sets the pre-amp used for files that have ReplayGain tags. By
 # default this setting is disabled.
 #
 #replaygain_preamp		"0"
 #
 # This setting enables on-the-fly normalization volume adjustment. This will
 # result in the volume of all playing audio to be adjusted so the output has
 # equal "loudness". This setting is disabled by default.
 #
 #volume_normalization		"no"
 #
 ###############################################################################
 
 
 # MPD Internal Buffering ######################################################
 #
 # This setting adjusts the size of internal decoded audio buffering. Changing
 # this may have undesired effects. Don't change this if you don't know what you
 # are doing.
 #
 #audio_buffer_size		"2048"
 #
 # This setting controls the percentage of the buffer which is filled before
 # beginning to play. Increasing this reduces the chance of audio file skipping,
 # at the cost of increased time prior to audio playback.
 #
 #buffer_before_play		"10%"
 #
 ###############################################################################
 
 
 # Resource Limitations ########################################################
 #
 # These settings are various limitations to prevent MPD from using too many
 # resources. Generally, these settings should be minimized to prevent security
 # risks, depending on the operating resources.
 #
 #connection_timeout		"60"
 #max_connections		"10"
 #max_playlist_length		"16384"
 #max_command_list_size		"2048"
 #max_output_buffer_size		"8192"
 #
 ###############################################################################
 
 
 # Character Encoding ##########################################################
 #
 # If file or directory names do not display correctly for your locale then you
 # may need to modify this setting. After modification of this setting mpd
 # --create-db must be run to change the database.
 #
 filesystem_charset		"UTF-8"
 #
 # This setting controls the encoding that ID3v1 tags should be converted from.
 #
 id3v1_encoding			"UTF-8"
 #
 ###############################################################################
 # SIDPlay decoder #############################################################
 #
 # songlength_database:
 #  Location of your songlengths file, as distributed with the HVSC.
 #  The sidplay plugin checks this for matching MD5 fingerprints.
 #  See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
 #
 # default_songlength:
 #  This is the default playing time in seconds for songs not in the
 #  songlength database, or in case you're not using a database.
 #  A value of 0 means play indefinitely.
 #
 # filter:
 #  Turns the SID filter emulation on or off.
 #
 #decoder {
 #       plugin                  "sidplay"
 #       songlength_database     "/media/C64Music/DOCUMENTS/Songlengths.txt"
 #       default_songlength      "120"
 #       filter "true"
 #}
 #
 ###############################################################################