View difference between Paste ID: ZkRKDFta and em0hmy4t
SHOW: | | - or go back to the newest paste.
1
$ cat /etc/network/interfaces
2
# This file describes the network interfaces available on your system
3
# and how to activate them. For more information, see interfaces(5).
4
5
# The loopback network interface
6
auto lo
7
iface lo inet loopback
8
9
# The primary network interface
10
#auto em1
11
#iface em1 inet dhcp
12
13
# Bridged network
14
auto br0
15
iface br0 inet dhcp
16
	bridge_ports em1
17
	bridge_stp on
18
	bridge_fd 0
19
	bridge_maxwait 0
20
$ ifconfig
21
br0       Link encap:Ethernet  HWaddr f4:ce:46:b0:1e:f0  
22
          inet addr:192.168.17.17  Bcast:192.168.17.255  Mask:255.255.255.0
23
          inet6 addr: fe80::f6ce:46ff:feb0:1ef0/64 Scope:Link
24
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
25
          RX packets:338237 errors:0 dropped:0 overruns:0 frame:0
26
          TX packets:180207 errors:0 dropped:0 overruns:0 carrier:0
27
          collisions:0 txqueuelen:0 
28
          RX bytes:460007814 (460.0 MB)  TX bytes:13900357 (13.9 MB)
29
30
em1       Link encap:Ethernet  HWaddr f4:ce:46:b0:1e:f0  
31
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
32
          RX packets:338311 errors:0 dropped:0 overruns:0 frame:0
33
          TX packets:181776 errors:0 dropped:0 overruns:0 carrier:0
34
          collisions:0 txqueuelen:1000 
35
          RX bytes:464748748 (464.7 MB)  TX bytes:13985821 (13.9 MB)
36
          Memory:c0400000-c0420000 
37
38
lo        Link encap:Local Loopback  
39
          inet addr:127.0.0.1  Mask:255.0.0.0
40
          inet6 addr: ::1/128 Scope:Host
41
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
42
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0
43
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
44
          collisions:0 txqueuelen:0 
45
          RX bytes:1296 (1.2 KB)  TX bytes:1296 (1.2 KB)
46
47
$ uvt-kvm create secondtest --bridge br0
48
$ uvt-kvm wait secondtest --insecure
49-
uvt-kvm: error: libvirt domain 'secondtest' has no NIC MACs available.
49+
uvt-kvm: error: libvirt domain 'secondtest' has no NIC MACs available.
50
51
/var/log/libvirt/qemu$ sudo cat secondtest.log 
52
2014-07-24 04:31:55.911+0000: starting up
53
LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm-spice -name secondtest -S -machine pc-i440fx-trusty,accel=kvm,usb=off -m 512 -realtime mlock=off -smp 1,sockets=1,cores=1,threads=1 -uuid 8d600b8b-d55e-42a1-ae31-14b6515e5482 -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/secondtest.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -boot strict=on -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive file=/var/lib/uvtool/libvirt/images/secondtest.qcow,if=none,id=drive-virtio-disk0,format=qcow2 -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 -drive file=/var/lib/uvtool/libvirt/images/secondtest-ds.qcow,if=none,id=drive-virtio-disk1,format=raw -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk1,id=virtio-disk1 -netdev tap,fd=28,id=hostnet0,vhost=on,vhostfd=30 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:b9:15:cd,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -vnc 127.0.0.1:1 -device cirrus-vga,id=video0,bus=pci.0,addr=0x2 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6
54
char device redirected to /dev/pts/5 (label charserial0)
55
qemu: terminating on signal 15 from pid 1395
56
2014-07-24 04:33:44.378+0000: shutting down
57
2014-07-24 04:34:40.223+0000: starting up
58
LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm-spice -name secondtest -S -machine pc-i440fx-trusty,accel=kvm,usb=off -m 512 -realtime mlock=off -smp 1,sockets=1,cores=1,threads=1 -uuid 9cd8dff3-3df0-4b60-b76f-b9e90328cb70 -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/secondtest.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -boot strict=on -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive file=/var/lib/uvtool/libvirt/images/secondtest.qcow,if=none,id=drive-virtio-disk0,format=qcow2 -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 -drive file=/var/lib/uvtool/libvirt/images/secondtest-ds.qcow,if=none,id=drive-virtio-disk1,format=raw -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk1,id=virtio-disk1 -netdev tap,fd=28,id=hostnet0,vhost=on,vhostfd=30 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:2d:9f:8d,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -vnc 127.0.0.1:1 -device cirrus-vga,id=video0,bus=pci.0,addr=0x2 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6
59
char device redirected to /dev/pts/5 (label charserial0)
60
qemu: terminating on signal 15 from pid 1395
61
2014-07-24 04:42:10.215+0000: shutting down
62
2014-07-24 04:42:25.331+0000: starting up
63
LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm-spice -name secondtest -S -machine pc-i440fx-trusty,accel=kvm,usb=off -m 512 -realtime mlock=off -smp 1,sockets=1,cores=1,threads=1 -uuid 45fa0463-8aa5-496e-a94f-ea7cf7b3e98a -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/secondtest.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -boot strict=on -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive file=/var/lib/uvtool/libvirt/images/secondtest.qcow,if=none,id=drive-virtio-disk0,format=qcow2 -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 -drive file=/var/lib/uvtool/libvirt/images/secondtest-ds.qcow,if=none,id=drive-virtio-disk1,format=raw -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk1,id=virtio-disk1 -netdev tap,fd=28,id=hostnet0,vhost=on,vhostfd=30 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:28:5b:2c,bus=pci.0,addr=0x3 -chardev stdio,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -vnc 127.0.0.1:1 -device cirrus-vga,id=video0,bus=pci.0,addr=0x2 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6
64
[    0.000000] Initializing cgroup subsys cpuset
65
[    0.000000] Initializing cgroup subsys cpu
66
[    0.000000] Initializing cgroup subsys cpuacct
67
[    0.000000] Linux version 3.13.0-29-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #53-Ubuntu SMP Wed Jun 4 21:00:20 UTC 2014 (Ubuntu 3.13.0-29.53-generic 3.13.11.2)
68
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-29-generic root=LABEL=cloudimg-rootfs ro console=tty1 console=ttyS0
69
[    0.000000] KERNEL supported cpus:
70
[    0.000000]   Intel GenuineIntel
71
[    0.000000]   AMD AuthenticAMD
72
[    0.000000]   Centaur CentaurHauls
73
[    0.000000] e820: BIOS-provided physical RAM map:
74
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
75
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
76
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
77
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffdfff] usable
78
[    0.000000] BIOS-e820: [mem 0x000000001fffe000-0x000000001fffffff] reserved
79
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
80
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
81
[    0.000000] NX (Execute Disable) protection: active
82
[    0.000000] SMBIOS 2.4 present.
83
[    0.000000] Hypervisor detected: KVM
84
[    0.000000] No AGP bridge found
85
[    0.000000] e820: last_pfn = 0x1fffe max_arch_pfn = 0x400000000
86
[    0.000000] PAT not supported by CPU.
87
[    0.000000] found SMP MP-table at [mem 0x000f0b50-0x000f0b5f] mapped at [ffff8800000f0b50]
88
[    0.000000] Scanning 1 areas for low memory corruption
89
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
90
[    0.000000] init_memory_mapping: [mem 0x1fc00000-0x1fdfffff]
91
[    0.000000] init_memory_mapping: [mem 0x1c000000-0x1fbfffff]
92
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
93
[    0.000000] init_memory_mapping: [mem 0x1fe00000-0x1fffdfff]
94
[    0.000000] RAMDISK: [mem 0x1f1f3000-0x1f8defff]
95
[    0.000000] ACPI: RSDP 00000000000f09c0 000014 (v00 BOCHS )
96
[    0.000000] ACPI: RSDT 000000001ffffbc1 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
97
[    0.000000] ACPI: FACP 000000001ffff1c0 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
98
[    0.000000] ACPI: DSDT 000000001fffe040 001180 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
99
[    0.000000] ACPI: FACS 000000001fffe000 000040
100
[    0.000000] ACPI: SSDT 000000001ffff234 0008DD (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
101
[    0.000000] ACPI: APIC 000000001ffffb11 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
102
[    0.000000] ACPI: HPET 000000001ffffb89 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
103
[    0.000000] No NUMA configuration found
104
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000001fffdfff]
105
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x1fffdfff]
106
[    0.000000]   NODE_DATA [mem 0x1fff9000-0x1fffdfff]
107
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
108
[    0.000000] kvm-clock: cpu 0, msr 0:1fff5001, boot clock
109
[    0.000000] Zone ranges:
110
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
111
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
112
[    0.000000]   Normal   empty
113
[    0.000000] Movable zone start for each node
114
[    0.000000] Early memory node ranges
115
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
116
[    0.000000]   node   0: [mem 0x00100000-0x1fffdfff]
117
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
118
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
119
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
120
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
121
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
122
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
123
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
124
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
125
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
126
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
127
[    0.000000] Using ACPI (MADT) for SMP configuration information
128
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
129
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
130
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
131
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
132
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
133
[    0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
134
[    0.000000] Booting paravirtualized kernel on KVM
135
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
136
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88001fc00000 s86336 r8192 d24256 u2097152
137
[    0.000000] kvm-clock: cpu 0, msr 0:1fff5001, primary cpu clock
138
[    0.000000] KVM setup async PF for cpu 0
139
[    0.000000] kvm-stealtime: cpu 0, msr 1fc0dfc0
140
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 128903
141
[    0.000000] Policy zone: DMA32
142
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-29-generic root=LABEL=cloudimg-rootfs ro console=tty1 console=ttyS0
143
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
144
[    0.000000] Checking aperture...
145
[    0.000000] No AGP bridge found
146
[    0.000000] Memory: 491864K/523888K available (7356K kernel code, 1142K rwdata, 3396K rodata, 1332K init, 1440K bss, 32024K reserved)
147
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
148
[    0.000000] Hierarchical RCU implementation.
149
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
150
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
151
[    0.000000] 	Offload RCU callbacks from all CPUs
152
[    0.000000] 	Offload RCU callbacks from CPUs: 0.
153
[    0.000000] NR_IRQS:16640 nr_irqs:256 16
154
[    0.000000] Console: colour VGA+ 80x25
155
[    0.000000] console [tty1] enabled
156
[    0.000000] console [ttyS0] enabled
157
[    0.000000] allocated 2097152 bytes of page_cgroup
158
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
159
[    0.000000] tsc: Detected 2266.742 MHz processor
160
[    0.008000] Calibrating delay loop (skipped) preset value.. 4533.48 BogoMIPS (lpj=9066968)
161
[    0.008000] pid_max: default: 32768 minimum: 301
162
[    0.008027] Security Framework initialized
163
[    0.009195] AppArmor: AppArmor initialized
164
[    0.010328] Yama: becoming mindful.
165
[    0.012084] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
166
[    0.014022] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
167
[    0.016084] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
168
[    0.017735] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
169
[    0.019692] Initializing cgroup subsys memory
170
[    0.020011] Initializing cgroup subsys devices
171
[    0.021220] Initializing cgroup subsys freezer
172
[    0.022419] Initializing cgroup subsys blkio
173
[    0.024006] Initializing cgroup subsys perf_event
174
[    0.025275] Initializing cgroup subsys hugetlb
175
[    0.026555] mce: CPU supports 10 MCE banks
176
[    0.028056] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
177
[    0.028056] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
178
[    0.028056] tlb_flushall_shift: 6
179
[    0.048499] Freeing SMP alternatives memory: 32K (ffffffff81e6c000 - ffffffff81e74000)
180
[    0.055449] ACPI: Core revision 20131115
181
[    0.056955] ACPI: All ACPI Tables successfully acquired
182
[    0.058572] ftrace: allocating 28463 entries in 112 pages
183
[    0.072329] Enabling x2apic
184
[    0.073286] Enabled x2apic
185
[    0.076005] Switched APIC routing to physical x2apic.
186
[    0.078786] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
187
[    0.080003] smpboot: CPU0: Intel QEMU Virtual CPU version 2.0.0 (fam: 06, model: 06, stepping: 03)
188
[    0.090653] Performance Events: Broken PMU hardware detected, using software events only.
189
[    0.093577] Failed to access perfctr msr (MSR c1 is 0)
190
[    0.097449] x86: Booted up 1 node, 1 CPUs
191
[    0.098564] smpboot: Total of 1 processors activated (4533.48 BogoMIPS)
192
[    0.100337] NMI watchdog: disabled (cpu0): hardware events not enabled
193
[    0.102016] devtmpfs: initialized
194
[    0.107245] EVM: security.selinux
195
[    0.108003] EVM: security.SMACK64
196
[    0.108958] EVM: security.ima
197
[    0.109856] EVM: security.capability
198
[    0.112634] pinctrl core: initialized pinctrl subsystem
199
[    0.114057] regulator-dummy: no parameters
200
[    0.115267] RTC time:  4:42:27, date: 07/24/14
201
[    0.116039] NET: Registered protocol family 16
202
[    0.117325] cpuidle: using governor ladder
203
[    0.118469] cpuidle: using governor menu
204
[    0.120048] ACPI: bus type PCI registered
205
[    0.121149] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
206
[    0.122866] PCI: Using configuration type 1 for base access
207
[    0.124716] bio: create slab <bio-0> at 0
208
[    0.125953] ACPI: Added _OSI(Module Device)
209
[    0.127100] ACPI: Added _OSI(Processor Device)
210
[    0.128003] ACPI: Added _OSI(3.0 _SCP Extensions)
211
[    0.129234] ACPI: Added _OSI(Processor Aggregator Device)
212
[    0.133083] ACPI: Interpreter enabled
213
[    0.134136] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
214
[    0.136004] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
215
[    0.138563] ACPI: (supports S0 S3 S4 S5)
216
[    0.140003] ACPI: Using IOAPIC for interrupt routing
217
[    0.141301] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
218
[    0.144277] ACPI: No dock devices found.
219
[    0.147969] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
220
[    0.148007] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
221
[    0.149682] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
222
[    0.152084] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
223
[    0.155128] acpiphp: Slot [3] registered
224
[    0.156028] acpiphp: Slot [4] registered
225
[    0.157141] acpiphp: Slot [5] registered
226
[    0.158236] acpiphp: Slot [6] registered
227
[    0.160028] acpiphp: Slot [7] registered
228
[    0.161133] acpiphp: Slot [8] registered
229
[    0.162244] acpiphp: Slot [9] registered
230
[    0.163335] acpiphp: Slot [10] registered
231
[    0.164027] acpiphp: Slot [11] registered
232
[    0.165161] acpiphp: Slot [12] registered
233
[    0.166280] acpiphp: Slot [13] registered
234
[    0.168027] acpiphp: Slot [14] registered
235
[    0.170655] acpiphp: Slot [15] registered
236
[    0.171776] acpiphp: Slot [16] registered
237
[    0.172027] acpiphp: Slot [17] registered
238
[    0.173150] acpiphp: Slot [18] registered
239
[    0.174272] acpiphp: Slot [19] registered
240
[    0.176029] acpiphp: Slot [20] registered
241
[    0.177146] acpiphp: Slot [21] registered
242
[    0.178291] acpiphp: Slot [22] registered
243
[    0.179410] acpiphp: Slot [23] registered
244
[    0.180027] acpiphp: Slot [24] registered
245
[    0.181149] acpiphp: Slot [25] registered
246
[    0.182308] acpiphp: Slot [26] registered
247
[    0.184030] acpiphp: Slot [27] registered
248
[    0.185140] acpiphp: Slot [28] registered
249
[    0.186260] acpiphp: Slot [29] registered
250
[    0.187377] acpiphp: Slot [30] registered
251
[    0.188029] acpiphp: Slot [31] registered
252
[    0.189149] PCI host bridge to bus 0000:00
253
[    0.190261] pci_bus 0000:00: root bus resource [bus 00-ff]
254
[    0.192004] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
255
[    0.193533] pci_bus 0000:00: root bus resource [io  0x0d00-0xadff]
256
[    0.195056] pci_bus 0000:00: root bus resource [io  0xae0f-0xaeff]
257
[    0.196004] pci_bus 0000:00: root bus resource [io  0xaf20-0xafdf]
258
[    0.197528] pci_bus 0000:00: root bus resource [io  0xafe4-0xffff]
259
[    0.200004] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
260
[    0.201666] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff]
261
[    0.216608] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
262
[    0.218547] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
263
[    0.271785] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
264
[    0.273026] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
265
[    0.275063] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
266
[    0.277036] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
267
[    0.278999] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
268
[    0.280941] ACPI: Enabled 16 GPEs in block 00 to 0F
269
[    0.282573] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
270
[    0.284003] vgaarb: loaded
271
[    0.284852] vgaarb: bridge control possible 0000:00:02.0
272
[    0.286328] SCSI subsystem initialized
273
[    0.288055] ACPI: bus type USB registered
274
[    0.289183] usbcore: registered new interface driver usbfs
275
[    0.290573] usbcore: registered new interface driver hub
276
[    0.292024] usbcore: registered new device driver usb
277
[    0.293427] PCI: Using ACPI for IRQ routing
278
[    0.294810] NetLabel: Initializing
279
[    0.296003] NetLabel:  domain hash size = 128
280
[    0.297146] NetLabel:  protocols = UNLABELED CIPSOv4
281
[    0.298451] NetLabel:  unlabeled traffic allowed by default
282
[    0.300064] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
283
[    0.301812] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
284
[    0.304003] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
285
[    0.309120] Switched to clocksource kvm-clock
286
[    0.315080] AppArmor: AppArmor Filesystem Enabled
287
[    0.316648] pnp: PnP ACPI init
288
[    0.317735] ACPI: bus type PNP registered
289
[    0.319725] pnp: PnP ACPI: found 7 devices
290
[    0.320960] ACPI: bus type PNP unregistered
291
[    0.327870] NET: Registered protocol family 2
292
[    0.329178] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
293
[    0.330889] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
294
[    0.332499] TCP: Hash tables configured (established 4096 bind 4096)
295
[    0.334074] TCP: reno registered
296
[    0.335010] UDP hash table entries: 256 (order: 1, 8192 bytes)
297
[    0.336484] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
298
[    0.338058] NET: Registered protocol family 1
299
[    0.339233] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
300
[    0.340736] pci 0000:00:01.0: PIIX3: Enabling Passive Release
301
[    0.342188] pci 0000:00:01.0: Activating ISA DMA hang workarounds
302
[    0.343968] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
303
[    0.346146] Trying to unpack rootfs image as initramfs...
304
[    0.473614] Freeing initrd memory: 7088K (ffff88001f1f3000 - ffff88001f8df000)
305
[    0.475743] microcode: CPU0 sig=0x663, pf=0x1, revision=0x1
306
[    0.477288] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
307
[    0.479514] Scanning for low memory corruption every 60 seconds
308
[    0.481973] Initialise system trusted keyring
309
[    0.483221] audit: initializing netlink socket (disabled)
310
[    0.484659] type=2000 audit(1406176947.537:1): initialized
311
[    0.511531] HugeTLB registered 2 MB page size, pre-allocated 0 pages
312
[    0.514001] zbud: loaded
313
[    0.514941] VFS: Disk quotas dquot_6.5.2
314
[    0.516203] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
315
[    0.518192] fuse init (API version 7.22)
316
[    0.519342] msgmni has been set to 974
317
[    0.520481] Key type big_key registered
318
[    0.521772] Key type asymmetric registered
319
[    0.522909] Asymmetric key parser 'x509' registered
320
[    0.524234] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
321
[    0.526247] io scheduler noop registered
322
[    0.527322] io scheduler deadline registered (default)
323
[    0.528727] io scheduler cfq registered
324
[    0.529849] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
325
[    0.531261] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
326
[    0.532961] ipmi message handler version 39.2
327
[    0.534183] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
328
[    0.536172] ACPI: Power Button [PWRF]
329
[    0.537300] GHES: HEST is not enabled!
330
[    0.538740] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
331
[    0.542521] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
332
[    0.545677] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
333
[    0.548231] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
334
[    0.575536] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
335
[    0.578571] Linux agpgart interface v0.103
336
[    0.581082] brd: module loaded
337
[    0.582935] loop: module loaded
338
[    0.584282] blk-mq: CPU -> queue map
339
[    0.585293]   CPU 0 -> Queue 0
340
[    0.586574]  vda: vda1
341
[    0.588733] blk-mq: CPU -> queue map
342
[    0.589747]   CPU 0 -> Queue 0
343
[    0.591374]  vdb: unknown partition table
344
[    0.594768] scsi0 : ata_piix
345
[    0.595693] scsi1 : ata_piix
346
[    0.596658] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0e0 irq 14
347
[    0.598308] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0e8 irq 15
348
[    0.600685] libphy: Fixed MDIO Bus: probed
349
[    0.601875] tun: Universal TUN/TAP device driver, 1.6
350
[    0.603183] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
351
[    0.616426] PPP generic driver version 2.4.2
352
[    0.617897] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
353
[    0.619806] ehci-pci: EHCI PCI platform driver
354
[    0.621654] ehci-platform: EHCI generic platform driver
355
[    0.623785] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
356
[    0.626246] ohci-pci: OHCI PCI platform driver
357
[    0.628167] ohci-platform: OHCI generic platform driver
358
[    0.630292] uhci_hcd: USB Universal Host Controller Interface driver
359
[    0.633887] uhci_hcd 0000:00:01.2: UHCI Host Controller
360
[    0.635228] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
361
[    0.637286] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c080
362
[    0.638801] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
363
[    0.640678] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
364
[    0.642798] usb usb1: Product: UHCI Host Controller
365
[    0.644246] usb usb1: Manufacturer: Linux 3.13.0-29-generic uhci_hcd
366
[    0.645899] usb usb1: SerialNumber: 0000:00:01.2
367
[    0.647340] hub 1-0:1.0: USB hub found
368
[    0.648438] hub 1-0:1.0: 2 ports detected
369
[    0.649731] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
370
[    0.652819] serio: i8042 KBD port at 0x60,0x64 irq 1
371
[    0.654226] serio: i8042 AUX port at 0x60,0x64 irq 12
372
[    0.655824] mousedev: PS/2 mouse device common for all mice
373
[    0.657861] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
374
[    0.660418] rtc_cmos 00:00: RTC can wake from S4
375
[    0.662100] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
376
[    0.663823] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
377
[    0.665979] device-mapper: uevent: version 1.0.3
378
[    0.667343] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
379
[    0.669787] ledtrig-cpu: registered to indicate activity on CPUs
380
[    0.671456] TCP: cubic registered
381
[    0.672610] NET: Registered protocol family 10
382
[    0.674094] NET: Registered protocol family 17
383
[    0.675428] Key type dns_resolver registered
384
[    0.676814] Loading compiled-in X.509 certificates
385
[    0.679091] Loaded X.509 cert 'Magrathea: Glacier signing key: 6602cb36f1313bea01c4bda96567cfa723c970d8'
386
[    0.681872] registered taskstats version 1
387
[    0.685276] Key type trusted registered
388
[    0.688293] Key type encrypted registered
389
[    0.691173] AppArmor: AppArmor sha1 policy hashing enabled
390
[    0.692837] IMA: No TPM chip found, activating TPM-bypass!
391
[    0.694728] regulator-dummy: disabling
392
[    0.695927]   Magic number: 6:914:717
393
[    0.697240] rtc_cmos 00:00: setting system clock to 2014-07-24 04:42:27 UTC (1406176947)
394
[    0.699579] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
395
[    0.701363] EDD information not available.
396
[    0.758709] Freeing unused kernel memory: 1332K (ffffffff81d1f000 - ffffffff81e6c000)
397
[    0.762105] Write protecting the kernel read-only data: 12288k
398
[    0.766643] Freeing unused kernel memory: 824K (ffff880001732000 - ffff880001800000)
399
[    0.772038] Freeing unused kernel memory: 700K (ffff880001b51000 - ffff880001c00000)
400
Loading, please wait...
401
[    0.792174] systemd-udevd[95]: starting version 204
402
[    0.829005] FDC 0 is a S82078B
403
[    1.472239] tsc: Refined TSC clocksource calibration: 2266.744 MHz
404
[    1.866924] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
405
Begin: Loading essential drivers ... done.
406
Begin: Running /scripts/init-premount ... done.
407
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
408
Begin: Running /scripts/local-premount ... done.
409
[    2.252836] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
410
Begin: Running /scripts/local-bottom ... done.
411
done.
412
Begin: Running /scripts/init-bottom ... done.
413
[    2.362444] random: init urandom read with 10 bits of entropy available
414
 * Starting Initialize or finalize resolvconf                            [ OK ]
415
[    2.717955] EXT4-fs (vda1): re-mounted. Opts: (null)
416
 * Stopping Track if upstart is running in a container                   [ OK ]
417
 * Starting Signal sysvinit that the rootfs is mounted                   [ OK ]
418
 * Starting set console keymap                                           [ OK ]
419
 * Starting Signal sysvinit that virtual filesystems are mounted         [ OK ]
420
 * Starting Signal sysvinit that virtual filesystems are mounted         [ OK ]
421
 * Starting Bridge udev events into upstart                              [ OK ]
422
 * Starting device node and kernel event manager                         [ OK ]
423
 * Starting Signal sysvinit that remote filesystems are mounted          [ OK ]
424
 * Starting Clean /tmp directory                                         [ OK ]
425
 * Starting load modules from /etc/modules                               [ OK ]
426
 * Starting cold plug devices                                            [ OK ]
427
 * Starting log initial device creation                                  [ OK ]
428
 * Stopping Clean /tmp directory                                         [ OK ]
429
 * Stopping load modules from /etc/modules                               [ OK ]
430
 * Stopping set console keymap                                           [ OK ]
431
 * Starting Uncomplicated firewall                                       [ OK ]
432
Cloud-init v. 0.7.5 running 'init-local' at Thu, 24 Jul 2014 04:42:30 +0000. Up 3.86 seconds.
433
 * Starting configure network device security                            [ OK ]
434
 * Starting configure network device security                            [ OK ]
435
 * Starting Read required files in advance (for other mountpoints)       [fail]
436
 * Stopping Read required files in advance (for other mountpoints)       [ OK ]
437
 * Starting Mount network filesystems                                    [ OK ]
438
 * Stopping Mount network filesystems                                    [ OK ]
439
 * Starting Bridge socket events into upstart                            [ OK ]
440
 * Starting configure network device                                     [ OK ]
441
Jul 24 04:42:32 ubuntu pollinate[529]: ERROR: Network communication failed [6]\n04:42:32.838838 * Hostname was NOT found in DNS cache
442
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
443
                                 Dload  Upload   Total   Spent    Left  Speed
444
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     004:42:32.851628 * Could not resolve host: entropy.ubuntu.com
445
04:42:32.851699 * Closing connection 0
446
curl: (6) Could not resolve host: entropy.ubuntu.com
447
2014-07-24 04:42:32,663 - util.py[WARNING]: Running seed_random (<module 'cloudinit.config.cc_seed_random' from '/usr/lib/python2.7/dist-packages/cloudinit/config/cc_seed_random.pyc'>) failed
448
 * Stopping cold plug devices                                            [ OK ]
449
 * Stopping log initial device creation                                  [ OK ]
450
 * Starting enable remaining boot-time encrypted block devices           [ OK ]
451
 * Starting Mount network filesystems                                    [ OK ]
452
 * Stopping Mount network filesystems                                    [ OK ]
453
 * Starting configure network device                                     [ OK ]
454
Generating public/private rsa key pair.
455
Your identification has been saved in /etc/ssh/ssh_host_rsa_key.
456
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub.
457
<redacted>
458
Generating public/private dsa key pair.
459
Your identification has been saved in /etc/ssh/ssh_host_dsa_key.
460
Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub.
461
<redacted>
462
Generating public/private ecdsa key pair.
463
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key.
464
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub.
465
<redacted>
466
Cloud-init v. 0.7.5 running 'init' at Thu, 24 Jul 2014 04:42:36 +0000. Up 9.54 seconds.
467
ci-info: +++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++
468
ci-info: +--------+------+---------------+---------------+-------------------+
469
ci-info: | Device |  Up  |    Address    |      Mask     |     Hw-Address    |
470
ci-info: +--------+------+---------------+---------------+-------------------+
471
ci-info: |   lo   | True |   127.0.0.1   |   255.0.0.0   |         .         |
472
ci-info: |  eth0  | True | 192.168.17.13 | 255.255.255.0 | 52:54:00:28:5b:2c |
473
ci-info: +--------+------+---------------+---------------+-------------------+
474
ci-info: ++++++++++++++++++++++++++++++++Route info+++++++++++++++++++++++++++++++++
475
ci-info: +-------+--------------+--------------+---------------+-----------+-------+
476
ci-info: | Route | Destination  |   Gateway    |    Genmask    | Interface | Flags |
477
ci-info: +-------+--------------+--------------+---------------+-----------+-------+
478
ci-info: |   0   |   0.0.0.0    | 192.168.17.2 |    0.0.0.0    |    eth0   |   UG  |
479
ci-info: |   1   | 192.168.17.0 |   0.0.0.0    | 255.255.255.0 |    eth0   |   U   |
480
ci-info: +-------+--------------+--------------+---------------+-----------+-------+
481
 * Starting Signal sysvinit that local filesystems are mounted           [ OK ]
482
 * Starting configure network device security                            [ OK ]
483
 * Stopping Mount filesystems on boot                                    [ OK ]
484
 * Starting flush early job output to logs                               [ OK ]
485
 * Stopping Failsafe Boot Delay                                          [ OK ]
486
 * Starting D-Bus system message bus                                     [ OK ]
487
 * Starting System V initialisation compatibility                        [ OK ]
488
 * Stopping flush early job output to logs                               [ OK ]
489
 * Starting SystemD login management service                             [ OK ]
490
 * Starting configure virtual network devices                            [ OK ]
491
 * Starting early crypto disks...                                        [ OK ] * Starting system logging daemon
492
                                                                         [ OK ]
493
 * Starting Seed the pseudo random number generator on first boot        [ OK ]
494
 * Starting Handle applying cloud-config                                 [ OK ]
495
 * Starting Bridge file events into upstart                              [ OK ]
496
Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
497
 * Starting AppArmor profiles                                            [ OK ] 
498
 * Stopping System V initialisation compatibility                        [ OK ]
499
Cloud-init v. 0.7.5 running 'modules:config' at Thu, 24 Jul 2014 04:42:37 +0000. Up 10.49 seconds.
500
open-vm-tools: not starting as this is not a VMware VM
501
landscape-client is not configured, please run landscape-config.
502
 * Starting System V runlevel compatibility                              [ OK ]
503
 * Starting deferred execution scheduler                                 [ OK ]
504
 * Starting regular background program processing daemon                 [ OK ]
505
 * Starting ACPI daemon                                                  [ OK ]
506
 * Starting save kernel messages                                         [ OK ]
507
 * Starting OpenSSH server                                               [ OK ]
508
 * Stopping save kernel messages                                         [ OK ]
509
 * Stopping CPU interrupts balancing daemon                              [ OK ]
510
 * Restoring resolver state...                                           [ OK ] 
511
 * Starting automatic crash report generation                            [ OK ]
512
 * Stopping System V runlevel compatibility                              [ OK ]
513
Generating locales...
514
  en_US.UTF-8... up-to-date
515
Generation complete.
516
517
Ubuntu 14.04 LTS secondtest ttyS0
518
519
secondtest login: Cloud-init v. 0.7.5 running 'modules:final' at Thu, 24 Jul 2014 04:42:38 +0000. Up 12.16 seconds.
520
ci-info: ++++++++Authorized keys from /home/ubuntu/.ssh/authorized_keys for user ubuntu++++++++
521
ci-info: +---------+-------------------------------------------------+---------+--------------+
522
ci-info: | Keytype |                Fingerprint (md5)                | Options |   Comment    |
523
ci-info: +---------+-------------------------------------------------+---------+--------------+
524
<redacted>
525
ci-info: +---------+-------------------------------------------------+---------+--------------+
526
ec2: 
527
ec2: #############################################################
528
ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
529
<redacted>
530
ec2: -----END SSH HOST KEY FINGERPRINTS-----
531
ec2: #############################################################
532
-----BEGIN SSH HOST KEY KEYS-----
533
<redacated>
534
-----END SSH HOST KEY KEYS-----
535
Cloud-init v. 0.7.5 finished at Thu, 24 Jul 2014 04:42:39 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb][dsmode=local].  Up 12.29 seconds
536
/var/log/libvirt/qemu$ 
537
538
539
$ uvt-kvm list
540
setlocale: No such file or directory
541
firsttest
542
secondtest
543
$ uvt-kvm ip secondtest
544
uvt-kvm: error: no IP address found for libvirt machine 'secondtest'.
545
$ ping 192.168.17.13   # from log file above
546
PING 192.168.17.13 (192.168.17.13) 56(84) bytes of data.
547
64 bytes from 192.168.17.13: icmp_seq=1 ttl=64 time=0.343 ms
548
64 bytes from 192.168.17.13: icmp_seq=2 ttl=64 time=0.292 ms
549
64 bytes from 192.168.17.13: icmp_seq=3 ttl=64 time=0.224 ms
550
^C
551
--- 192.168.17.13 ping statistics ---
552
3 packets transmitted, 3 received, 0% packet loss, time 1999ms
553
rtt min/avg/max/mdev = 0.224/0.286/0.343/0.050 ms
554
$ ssh ubuntu@192.168.17.13
555
Enter passphrase for key '/home/<redacted>/.ssh/id_rsa': 
556
Welcome to Ubuntu 14.04 LTS (GNU/Linux 3.13.0-29-generic x86_64)
557
558
 * Documentation:  https://help.ubuntu.com/
559
560
  System information as of Thu Jul 24 04:50:13 UTC 2014
561
562
  System load:  0.0              Processes:           68
563
  Usage of /:   9.4% of 7.84GB   Users logged in:     0
564
  Memory usage: 10%              IP address for eth0: 192.168.17.13
565
  Swap usage:   0%
566
567
  Graph this data and manage this system at:
568
    https://landscape.canonical.com/
569
570
  Get cloud support with Ubuntu Advantage Cloud Guest:
571
    http://www.ubuntu.com/business/services/cloud
572
573
0 packages can be updated.
574
0 updates are security updates.
575
576
577
Last login: Thu Jul 24 04:50:18 2014 from <redacted>
578
ubuntu@secondtest:~$