View difference between Paste ID: MY9HDL52 and VPuPtD6h

 -- This is eniallator's Remote program.
-shell.run("clear")
+-- The way it works is by using a command line interface where you can run commands to perform various tasks.
-term.setTextColor(colors.blue)
+-- The purpose of this program is to be able to control other computers which are running http://pastebin.com/ss0BX2mM (which i have also made).
-print("Type in a command you want to run or type 'help' for a list of commands.")
+-- if you don't know what to do there is a help list and you get it by simply typing "help" and that will list all of the available commands that you can run.
 
 version = "1.1.1"
 -- Version is used for the updater program i've made here: http://pastebin.com/jSWFQsA1
 
 rednet.open("back")
 local mProt = "masterRC"
 -- mProt is the protocol the computer will be using. You can also configure what side the wireless modem is on
 
 local logScreen = true
-  input = read()
+local logFolder = "mRemoteLogs"
 -- logScreen is a boolean variable where you can configure if you want the program to log whats displayed on the screen in the command line. The log folder is configurable to any folder of your choice just make sure its not one you are already using!
-  if input == "help" then
+
-    term.setTextColor(colors.lightBlue)
+local typeStartup = "startup "
-    print("list - will list available turtles to connect with")
+local typeError = "error   "
-    term.setTextColor(colors.blue)
+local typeInfoMSG = "infoMSG "
-    print("connect - will connect to a turtle")
+local typeReceived = "received"
-    term.setTextColor(colors.lightBlue)
+local typeInput = "input   "
-    print("exit - will exit the program")
+-- The different types of messages as displayed in the log output
-  elseif input == "exit" then
+
 local help = {"list - list available computers to connect with","connect - connect to a computer","exit - exit the program","protocol - change the rednet protocol","clear - clear the screen"}
 -- The help table
-
+
-  elseif input == "list" then
+function printMessage(logType, colour, toPrint)
-    rednet.broadcast("list")
+  term.setTextColor(colour)
-    term.setTextColor(colors.blue)
+  print(toPrint)
-    print("id: description")
+  log("[" .. logType .. "] " .. toPrint)
 end
 -- This function handles any printing to the console and also what colour you want the message in
-      sendID, msg = rednet.receive(1)
+
-
+function wordSplit(string)
    local out = {}
-
+   for word in string:gmatch("%S+") do
-      term.setTextColor(colors.lightBlue)
+      table.insert(out, word:lower())
-      print(sendID .. ": " .. msg)
+   end
    return out
-
+
-  elseif input == "connect" then
+-- This function splits up a string that's passed as an argument into a table at the spaces
-    term.setTextColor(colors.blue)
+
-    print("type in the id of the turtle you want to connect with")
+function log(logMessage)
-    prefix(": ")
+  if logScreen then
-    turtleID = read()
+    if fs.exists(logFolder) and fs.isDir(logFolder) then
       openLogFile = fs.open(logFile,"a")
-    if not tonumber(turtleID) then
+      openLogFile.writeLine(logMessage)
-      term.setTextColor(colors.lightBlue)
+      openLogFile.close()
-      print("make sure not to use letters!")
+
-
+
 end
-      turtleID = tonumber(turtleID)
+-- This function handles the logging to the logfile in the logFolder folder
-      rednet.send(turtleID, "connect")
+
-      connectID, msg = rednet.receive(1)
+
-
+
   term.write(write)
-        term.setTextColor(colors.lightBlue)
+
-        print("invalid ID")
+  prefixLog = write
 end
-
+-- Makes a prefix where you call functions on the command line
-        term.setTextColor(colors.green)
+
-        print(msg)
+function startUp()
-
+  shell.run("clear")
   printMessage(typeStartup,colors.blue,"Type in a command you want to run or type 'help' for a list of commands.")
-
+
-        prefix(connectID .. ": ")
+-- Message displayed when you start up the program
-        command = read()
+
-        commandTable = {}
+function invalidID()
-
+  printMessage(typeError, colors.red, 'Invalid ID. Type "list" to list computers nearby.')
-        for word in command:gmatch("%S+") do
+
-          table.insert(commandTable, word)
+-- This is called when the connect function fails
 
-
+if logScreen then
-
+  if fs.exists(logFolder) == false then
     fs.makeDir(logFolder)
-            rednet.send(connectID, "exit")
+
-            break
+
-
+  if fs.isDir(logFolder) then
     local files = fs.list(logFolder)
-            rednet.send(connectID, commandTable)
+
-            ID, message = rednet.receive(1)
+    if files[1] == nil then
-            term.setTextColor(colors.green)
+      logFile = logFolder .. "/log#0"
-            print(message)
+
       logFile = logFolder .. "/log#" .. #files
     end
   end
 end
 -- Makes log folder if there it is not made already and also makes log file
 
 startUp()
 while true do
   local status = {upload = 1,download = 1}
   prefix(": ")
   local input = read()
   local inputTable = wordSplit(input)
   log("[" .. typeInput .. '] "' .. prefixLog .. input .. '"')
   -- Displays the prefix on screen aswell as gets an input using read()
 
   if inputTable[1] == "help" then
     for l=1,#help do
       if l%2 == 1 then
         printMessage(typeInfoMSG, colors.lightBlue, help[l])
       else
         printMessage(typeInfoMSG, colors.blue, help[l])
       end
     end
     -- Displays the help table
 
   elseif inputTable[1] == "exit" then
     shell.run("clear")
     break
     -- Exit the program
 
   elseif inputTable[1] == "clear" then
     shell.run("clear")
 
   elseif inputTable[1] == "protocol" or inputTable[1] == "prot" then
     if inputTable[2] == nil then
       printMessage(typeInfoMSG,colors.blue,"Type in the new rednet protocol you want to set or leave blank to not set. Current protocol is:")
       printMessage(typeInfoMSG,colors.lightBlue,mProt)
       prefix("protocol: ")
       newProt = read()
     else
       newProt = inputTable[2]
     end
     -- Gets the newProt variable assigned to the user input whether if its in the second argument or gotten from when it prompts you
 
     log('[' .. typeInput .. '] "' .. prefixLog .. newProt .. '"')
 
     if newProt == "" then
       printMessage(typeError,colors.red,"Nil is not a valid protocol.")
     else
       printMessage(typeInfoMSG,colors.green,"Updated protocol.")
       mProt = newProt
     end
     -- Change the rednet protocol from the default
 
   elseif inputTable[1] == "list" or inputTable[1] == "ls" then
     rednet.broadcast("list", mProt)
     printMessage(typeInfoMSG,colors.blue,"id: description")
 
     while true do
       local sendID, msg = rednet.receive(mProt, 0.1)
       if sendID == nil then break end
       printMessage(typeReceived,colors.green,sendID .. ": " .. msg)
 
     end
     -- List all the available computers in the area that are running mControl and that aren't already connected
 
   elseif inputTable[1] == "connect" then
     if inputTable[2] == nil then
 
       printMessage(typeInfoMSG,colors.blue,"Type in the id of the computer you want to connect with")
       prefix("connect: ")
       computerID = read()
     else
 
       computerID = inputTable[2]
     end
 
     log('[' .. typeInput .. '] "' .. prefixLog .. computerID .. '"')
     -- Connect to a computer
 
     if not tonumber(computerID) or tonumber(computerID) > 65535 then
       invalidID()
 
     else
       local computerID = tonumber(computerID)
       rednet.send(computerID, "connect", mProt)
       local connectID, msg = rednet.receive(mProt, 0.1)
       -- Trying to connect to computer using computer ID
 
       if connectID == nil then
         invalidID()
       else
 
         if msg[1] ~= nil then
           printMessage(typeReceived,colors.green,msg[1])
           status = msg[2]
 
         else
           printMessage(typeReceived,colors.green,msg)
 
         end
         -- Displays the message received from computer connecting to. By default this is "Connected!"
 
         local disconnected = false
 
         while true do
         if message ~= nil and #message ~= 0 then
           if message[2] == nil then
             prefix(connectID .. ": ")
 
           else
             prefix(connectID .. "/" .. message[2] .. ": ")
 
           end
         else
           prefix(connectID .. ": ")
 
         end
         -- Checks to see if connected computer sent a table, this is for if the connected computer wants to put something in the following prefix then it can
 
         local command = read()
         local commandTable = wordSplit(command)
         log("[" .. typeInput .. '] "' .. prefixLog .. command .. '"')
         -- Gets a new user input
 
           if commandTable[1] == "exit" then
 
             rednet.send(connectID, {"exit"}, mProt)
             _, exitMessage = rednet.receive(mProt, 0.1)
 
             if exitMessage ~= nil then
 
               printMessage(typeReceived,colors.green,exitMessage)
               break
             else
             -- if connected computer responds then it will break the while loop that connects with the connected computer.
 
               printMessage(typeError,colors.red,'No message received. Do you want to forcibly close this connection?')
               printMessage(typeInfoMSG,colors.blue,'Type "Yes" or leave blank to keep the connection.')
               prefix("exit/Force: ")
               answer = read()
               log("[" .. typeInput .. ']"' .. prefixLog .. answer .. '"')
               -- if connected computer does not respond then you can forcibly close the connection by typing "Yes" with or without capitals or leave blank to stay connected
 
               if  answer:lower() == "yes" or answer:lower() == "y" then
 
                 break
               end
             end
             -- Disconnects from connected computer
 
           elseif commandTable[1] == "upload" and status.upload == 1 then
             if commandTable[2] ~= nil and commandTable[3] ~= nil then
               if fs.exists(commandTable[2]) == true and fs.isDir(commandTable[2]) == false then
 
                 rednet.send(connectID, commandTable, mProt)
                 local _, output = rednet.receive(mProt, 0.1)
                 if output == "send" then
 
                   local fileOpen = fs.open(commandTable[2], 'r')
                   local fileSend = fileOpen.readAll()
                   fileOpen.close()
                   rednet.send(connectID, fileSend, mProt)
                   printMessage(typeReceived,colors.green,"Successfully uploaded file.")
                   -- If everything goes right when using the upload function it will send the file to connected computer
                 elseif output == nil then
 
                   printMessage(typeError,colors.red,"Lost connection.")
                 else
 
                   printMessage(typeReceived,colors.green,output)
                 end
               else
 
                 printMessage(typeError,colors.red,"File does not exist on local computer.")
               end
             else
 
               printMessage(typeError,colors.red,'Invalid syntax. Correct syntax is - "upload [file to upload] [name of file to upload as]"')
             end
             -- Various different error messages in case something went wrong while using the upload function
 
           elseif commandTable[1] == "download" and status.download == 1 then
             if commandTable[2] ~= nil and commandTable[3] ~= nil then
               if fs.exists(commandTable[3]) == false then
 
                 rednet.send(connectID, commandTable, mProt)
                 local _, fileOutput = rednet.receive(mProt, 0.1)
 
                 if fileOutput[1] then
 
                   fileOpen = fs.open(commandTable[3], "w")
                   fileOpen.write(fileOutput[1])
                   fileOpen.close()
                   printMessage(typeReceived,colors.green,fileOutput[2])
                   -- If everything goes right when using the download function it will receive a file from connected computer
                 else
 
                   printMessage(typeReceived,colors.green,fileOutput)
                 end
               else
 
                 printMessage(typeError,colors.red,"File already exists on local computer.")
               end
             else
 
               printMessage(typeError,colors.red,'Invalid syntax. Correct syntax is - "download [file to download] [file name to download as]"')
             end
             -- Various different error messages in case something went wrong while using the download function
 
           elseif commandTable[1] == "reconnect" and disconnected then
 
             rednet.send(connectID, "connect", mProt)
             local _, connectMessage = rednet.receive(mProt,0.1)
 
             if connectMessage then
               -- If the connected computer replies then this will catch it
 
               if connectMessage[1] ~= nil then
 
                 printMessage(typeReceived,colors.green,connectMessage[1])
                 status = connectMessage[2]
               else
 
                 printMessage(typeReceived,colors.green,connectMessage)
               end
               -- Displaying the connection message
 
               disconnected = false
             else
               -- If you can't reconnect then this will catch it
 
               printMessage(typeError, colors.red, "Unable to reconnect.")
             end
 
           else
             rednet.send(connectID, commandTable, mProt)
             local ID, message = rednet.receive(mProt, 0.1)
 
             -- Sends command through if anything before hasn't caught it
             if message ~= nil and #message ~= 0 then
               if message[1] == nil then
                 printMessage(typeReceived,colors.green,message)
 
               else
                 printMessage(typeReceived,colors.green,message[1])
 
               end
 
               disconnected = false
             else
               printMessage(typeError,colors.red,"No message received.")
               disconnected = true
 
               if commandTable[1] == "help" then
 
                 printMessage(typeInfoMSG,colors.blue,"Available unconnected commands are:")
                 printMessage(typeInfoMSG,colors.lightBlue,"reconnect - reconnect to computer if connection has been lost")
                 printMessage(typeInfoMSG,colors.blue,"exit - breaks the connection between computers")
               else
 
                 printMessage(typeInfoMSG,colors.blue,'Type "help" for options.')
               end
             end
             -- Displays message received from connected computer after command has gone through
           end
         end
       end
     end
 
   else
     printMessage(typeError,colors.red,'Invalid command. Type "help" for options.')
   end
   -- Before connection occurs this is the default route for anything that's not recognised
 end