SHOW:
|
|
- or go back to the newest paste.
1 | smartctl 5.43 2012-06-30 r3573 [i686-linux-3.5.0-21-generic] (local build) | |
2 | Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
3 | ||
4 | - | ATA device successfully opened |
4 | + | |
5 | Model Family: Western Digital Caviar Blue Serial ATA | |
6 | - | Use 'smartctl -a' (or '-x') to print SMART (and more) information |
6 | + | |
7 | Serial Number: WD-WMAV2S473698 | |
8 | - | root@konepc:/var/log# smartctl -a /dev/sda |
8 | + | |
9 | Firmware Version: 03.03E03 | |
10 | User Capacity: 320 072 933 376 bytes [320 GB] | |
11 | Sector Size: 512 bytes logical/physical | |
12 | Device is: In smartctl database [for details use: -P show] | |
13 | ATA Version is: 8 | |
14 | ATA Standard is: Exact ATA specification draft version not indicated | |
15 | Local Time is: Wed Jan 9 15:53:45 2013 GMT | |
16 | SMART support is: Available - device has SMART capability. | |
17 | SMART support is: Enabled | |
18 | ||
19 | === START OF READ SMART DATA SECTION === | |
20 | SMART overall-health self-assessment test result: PASSED | |
21 | ||
22 | General SMART Values: | |
23 | Offline data collection status: (0x84) Offline data collection activity | |
24 | was suspended by an interrupting command from host. | |
25 | Auto Offline Data Collection: Enabled. | |
26 | Self-test execution status: ( 0) The previous self-test routine completed | |
27 | without error or no self-test has ever | |
28 | been run. | |
29 | Total time to complete Offline | |
30 | data collection: ( 5760) seconds. | |
31 | Offline data collection | |
32 | capabilities: (0x5b) SMART execute Offline immediate. | |
33 | Auto Offline data collection on/off support. | |
34 | Suspend Offline collection upon new | |
35 | command. | |
36 | Offline surface scan supported. | |
37 | Self-test supported. | |
38 | No Conveyance Self-test supported. | |
39 | Selective Self-test supported. | |
40 | SMART capabilities: (0x0003) Saves SMART data before entering | |
41 | power-saving mode. | |
42 | Supports SMART auto save timer. | |
43 | Error logging capability: (0x01) Error logging supported. | |
44 | General Purpose Logging supported. | |
45 | Short self-test routine | |
46 | recommended polling time: ( 2) minutes. | |
47 | Extended self-test routine | |
48 | recommended polling time: ( 70) minutes. | |
49 | SCT capabilities: (0x303f) SCT Status supported. | |
50 | SCT Error Recovery Control supported. | |
51 | SCT Feature Control supported. | |
52 | SCT Data Table supported. | |
53 | ||
54 | SMART Attributes Data Structure revision number: 16 | |
55 | Vendor Specific SMART Attributes with Thresholds: | |
56 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
57 | 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 197 | |
58 | 3 Spin_Up_Time 0x0027 136 134 021 Pre-fail Always - 4191 | |
59 | 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1136 | |
60 | 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
61 | 7 Seek_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 | |
62 | 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 2963 | |
63 | 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 | |
64 | 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
65 | 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1134 | |
66 | 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 | |
67 | 187 Reported_Uncorrect 0x0032 100 001 000 Old_age Always - 201 | |
68 | 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 9 | |
69 | 190 Airflow_Temperature_Cel 0x0022 050 041 040 Old_age Always - 50 | |
70 | 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 238 | |
71 | 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1136 | |
72 | 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
73 | 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
74 | 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 | |
75 | 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
76 | 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 | |
77 | ||
78 | SMART Error Log Version: 1 | |
79 | No Errors Logged | |
80 | ||
81 | SMART Self-test log structure revision number 1 | |
82 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
83 | # 1 Extended offline Interrupted (host reset) 80% 0 - | |
84 | ||
85 | SMART Selective self-test log data structure revision number 1 | |
86 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
87 | 1 0 0 Not_testing | |
88 | 2 0 0 Not_testing | |
89 | 3 0 0 Not_testing | |
90 | 4 0 0 Not_testing | |
91 | 5 0 0 Not_testing | |
92 | Selective self-test flags (0x0): | |
93 | After scanning selected spans, do NOT read-scan remainder of disk. | |
94 | If Selective self-test is pending on power-up, resume after 0 minute delay. |