SHOW:
|
|
- or go back to the newest paste.
1 | - | |
1 | + | xbian@xbian ~ $ dmesg XBain 2015.02.14 rpi2 |
2 | - | xbian@xbian ~ $ dmesg |
2 | + | |
3 | [ 0.000000] Linux version 3.18.6+ (root@xbian-dev) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1 SMP PREEMPT Tue Feb 10 20:50:39 CET 2015 | |
4 | [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d | |
5 | [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
6 | [ 0.000000] Machine: BCM2709 | |
7 | [ 0.000000] cma: Reserved 16 MiB at 0x2e000000 | |
8 | [ 0.000000] Memory policy: Data cache writealloc | |
9 | [ 0.000000] On node 0 totalpages: 192512 | |
10 | [ 0.000000] free_area_init_node: node 0, pgdat 806d0200, node_mem_map ada0f000 | |
11 | [ 0.000000] Normal zone: 1504 pages used for memmap | |
12 | [ 0.000000] Normal zone: 0 pages reserved | |
13 | [ 0.000000] Normal zone: 192512 pages, LIFO batch:31 | |
14 | [ 0.000000] [bcm2709_smp_init_cpus] enter (8560->f3003010) | |
15 | [ 0.000000] [bcm2709_smp_init_cpus] ncores=4 | |
16 | [ 0.000000] PERCPU: Embedded 9 pages/cpu @ad9e6000 s6464 r8192 d22208 u36864 | |
17 | [ 0.000000] pcpu-alloc: s6464 r8192 d22208 u36864 alloc=9*4096 | |
18 | [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
19 | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 191008 | |
20 | [ 0.000000] Kernel command line: selinux=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2709.boardrev=0xa01041 bcm2709.serial=0x87147f9b smsc95xx.macaddr=B8:27:EB:14:7F:9B bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 telnet zswap.enabled=1 zswap.compressor=lz4 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootflags=subvol=root/@,thread_pool=2,autodefrag,compress=lz4,commit=120 rootfstype=btrfs rootwait smsc95xx.turbo_mode=N logo.nologo quiet noswap loglevel=0 mod_scsi.scan=sync partswap startevent=mountall splash nohdparm --startup-event mountall | |
21 | [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) | |
22 | [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
23 | [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
24 | [ 0.000000] Memory: 739412K/770048K available (5105K kernel code, 267K rwdata, 1384K rodata, 188K init, 262K bss, 30636K reserved) | |
25 | [ 0.000000] Virtual kernel memory layout: | |
26 | [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
27 | [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) | |
28 | [ 0.000000] vmalloc : 0xaf800000 - 0xff000000 (1272 MB) | |
29 | [ 0.000000] lowmem : 0x80000000 - 0xaf000000 ( 752 MB) | |
30 | [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) | |
31 | [ 0.000000] .text : 0x80008000 - 0x8065e700 (6490 kB) | |
32 | [ 0.000000] .init : 0x8065f000 - 0x8068e000 ( 188 kB) | |
33 | [ 0.000000] .data : 0x8068e000 - 0x806d0fe0 ( 268 kB) | |
34 | [ 0.000000] .bss : 0x806d0fe0 - 0x80712b94 ( 263 kB) | |
35 | [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
36 | [ 0.000000] Preemptible hierarchical RCU implementation. | |
37 | [ 0.000000] NR_IRQS:480 | |
38 | [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt). | |
39 | [ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns | |
40 | [ 0.000024] Switching to timer-based delay loop, resolution 52ns | |
41 | [ 0.000217] Console: colour dummy device 80x30 | |
42 | [ 0.000345] console [tty1] enabled | |
43 | [ 0.000365] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=19200) | |
44 | [ 0.000381] pid_max: default: 32768 minimum: 301 | |
45 | [ 0.000522] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
46 | [ 0.000535] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
47 | [ 0.001484] Initializing cgroup subsys memory | |
48 | [ 0.001538] CPU: Testing write buffer coherency: ok | |
49 | [ 0.001902] missing device node for CPU 0 | |
50 | [ 0.001914] missing device node for CPU 1 | |
51 | [ 0.001920] missing device node for CPU 2 | |
52 | [ 0.001926] missing device node for CPU 3 | |
53 | [ 0.001939] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 | |
54 | [ 0.001948] [bcm2709_smp_prepare_cpus] enter | |
55 | [ 0.002025] Setting up static identity map for 0x4d9e18 - 0x4d9e4c | |
56 | [ 0.008384] [bcm2709_boot_secondary] cpu:1 started (0) 18 | |
57 | [ 0.008624] CPU1: Booted secondary processor | |
58 | [ 0.008628] [bcm2709_secondary_init] enter cpu:1 | |
59 | [ 0.008660] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 | |
60 | [ 0.009021] [bcm2709_boot_secondary] cpu:2 started (0) 18 | |
61 | [ 0.009191] CPU2: Booted secondary processor | |
62 | [ 0.009195] [bcm2709_secondary_init] enter cpu:2 | |
63 | [ 0.009215] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 | |
64 | [ 0.009557] [bcm2709_boot_secondary] cpu:3 started (0) 17 | |
65 | [ 0.009711] CPU3: Booted secondary processor | |
66 | [ 0.009715] [bcm2709_secondary_init] enter cpu:3 | |
67 | [ 0.009733] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 | |
68 | [ 0.009778] Brought up 4 CPUs | |
69 | [ 0.009796] SMP: Total of 4 processors activated (153.60 BogoMIPS). | |
70 | [ 0.009803] CPU: All CPU(s) started in SVC mode. | |
71 | [ 0.009865] LOCALITY CPU 0 to 1: 2 | |
72 | [ 0.009872] LOCALITY CPU 0 to 2: 2 | |
73 | [ 0.009879] LOCALITY CPU 0 to 3: 2 | |
74 | [ 0.009885] LOCALITY CPU 1 to 2: 2 | |
75 | [ 0.009891] LOCALITY CPU 1 to 3: 2 | |
76 | [ 0.009898] LOCALITY CPU 2 to 3: 2 | |
77 | [ 0.010323] devtmpfs: initialized | |
78 | [ 0.024350] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 | |
79 | [ 0.025208] xor: measuring software checksum speed | |
80 | [ 0.034310] arm4regs : 1248.000 MB/sec | |
81 | [ 0.044349] 8regs : 792.000 MB/sec | |
82 | [ 0.054394] 32regs : 732.000 MB/sec | |
83 | [ 0.064435] neon : 1164.000 MB/sec | |
84 | [ 0.064443] xor: using function: arm4regs (1248.000 MB/sec) | |
85 | [ 0.064472] pinctrl core: initialized pinctrl subsystem | |
86 | [ 0.065014] NET: Registered protocol family 16 | |
87 | [ 0.069815] DMA: preallocated 4096 KiB pool for atomic coherent allocations | |
88 | [ 0.073920] cpuidle: using governor menu | |
89 | [ 0.074517] bcm2709.uart_clock = 3000000 | |
90 | [ 0.075901] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. | |
91 | [ 0.075910] hw-breakpoint: maximum watchpoint size is 8 bytes. | |
92 | [ 0.075941] mailbox: Broadcom VideoCore Mailbox driver | |
93 | [ 0.076021] bcm2708_vcio: mailbox at f300b880 | |
94 | [ 0.076230] bcm_power: Broadcom power driver | |
95 | [ 0.076239] bcm_power_open() -> 0 | |
96 | [ 0.076246] bcm_power_request(0, 8) | |
97 | [ 0.576907] bcm_mailbox_read -> 00000080, 0 | |
98 | [ 0.576914] bcm_power_request -> 0 | |
99 | [ 0.577002] Serial: AMBA PL011 UART driver | |
100 | [ 0.577087] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3 | |
101 | [ 0.621248] raid6: int32x1 136 MB/s | |
102 | [ 0.638259] raid6: int32x2 175 MB/s | |
103 | [ 0.655178] raid6: int32x4 183 MB/s | |
104 | [ 0.672211] raid6: int32x8 179 MB/s | |
105 | [ 0.689228] raid6: neonx1 429 MB/s | |
106 | [ 0.706344] raid6: neonx2 582 MB/s | |
107 | [ 0.723378] raid6: neonx4 703 MB/s | |
108 | [ 0.740481] raid6: neonx8 644 MB/s | |
109 | [ 0.740489] raid6: using algorithm neonx4 (703 MB/s) | |
110 | [ 0.740496] raid6: using intx1 recovery algorithm | |
111 | [ 0.740942] SCSI subsystem initialized | |
112 | [ 0.741073] usbcore: registered new interface driver usbfs | |
113 | [ 0.741133] usbcore: registered new interface driver hub | |
114 | [ 0.741241] usbcore: registered new device driver usb | |
115 | [ 0.742793] Switched to clocksource arch_sys_counter | |
116 | [ 0.749445] NET: Registered protocol family 2 | |
117 | [ 0.750203] TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
118 | [ 0.750286] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
119 | [ 0.750414] TCP: Hash tables configured (established 8192 bind 8192) | |
120 | [ 0.750495] TCP: reno registered | |
121 | [ 0.750509] UDP hash table entries: 512 (order: 2, 16384 bytes) | |
122 | [ 0.750559] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
123 | [ 0.750832] NET: Registered protocol family 1 | |
124 | [ 0.751107] RPC: Registered named UNIX socket transport module. | |
125 | [ 0.751117] RPC: Registered udp transport module. | |
126 | [ 0.751124] RPC: Registered tcp transport module. | |
127 | [ 0.751131] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
128 | [ 0.752804] bcm2708_dma: DMA manager at f3007000 | |
129 | [ 0.752901] bcm2708_gpio: bcm2708_gpio_probe 806af528 | |
130 | [ 0.753315] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) | |
131 | [ 0.754195] futex hash table entries: 1024 (order: 4, 65536 bytes) | |
132 | [ 0.760433] zpool: loaded | |
133 | [ 0.760448] zbud: loaded | |
134 | [ 0.761010] VFS: Disk quotas dquot_6.5.2 | |
135 | [ 0.761191] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
136 | [ 0.763260] NFS: Registering the id_resolver key type | |
137 | [ 0.763313] Key type id_resolver registered | |
138 | [ 0.763321] Key type id_legacy registered | |
139 | [ 0.763345] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
140 | [ 0.763982] msgmni has been set to 1476 | |
141 | [ 0.765193] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) | |
142 | [ 0.765213] io scheduler noop registered | |
143 | [ 0.765227] io scheduler deadline registered | |
144 | [ 0.765383] io scheduler cfq registered | |
145 | [ 0.765543] io scheduler bfq registered (default) | |
146 | [ 0.765550] BFQ I/O-scheduler version: v7r7 | |
147 | [ 0.766719] BCM2708FB: allocated DMA memory ee400000 | |
148 | [ 0.766753] BCM2708FB: allocated DMA channel 0 @ f3007000 | |
149 | [ 0.793159] Console: switching to colour frame buffer device 240x67 | |
150 | [ 0.808038] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver | |
151 | [ 0.808241] uart-pl011 dev:f1: no DMA platform data | |
152 | [ 0.809363] usbcore: registered new interface driver smsc95xx | |
153 | [ 0.809395] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) | |
154 | [ 1.009546] Core Release: 2.80a | |
155 | [ 1.009560] Setting default values for core params | |
156 | [ 1.009600] Finished setting default values for core params | |
157 | [ 1.209875] Using Buffer DMA mode | |
158 | [ 1.209886] Periodic Transfer Interrupt Enhancement - disabled | |
159 | [ 1.209892] Multiprocessor Interrupt Enhancement - disabled | |
160 | [ 1.209900] OTG VER PARAM: 0, OTG VER FLAG: 0 | |
161 | [ 1.209912] Dedicated Tx FIFOs mode | |
162 | [ 1.210132] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xae414000 dma = 0xee414000 len=9024 | |
163 | [ 1.210163] FIQ FSM acceleration enabled for : | |
164 | [ 1.210163] Non-periodic Split Transactions | |
165 | [ 1.210163] Periodic Split Transactions | |
166 | [ 1.210163] High-Speed Isochronous Endpoints | |
167 | [ 1.210179] dwc_otg: Microframe scheduler enabled | |
168 | [ 1.210221] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x803a7748 | |
169 | [ 1.210232] WARN::hcd_init_fiq:413: FIQ ASM at 0x803a7a78 length 36 | |
170 | [ 1.210244] WARN::hcd_init_fiq:438: MPHI regs_base at 0xaf812000 | |
171 | [ 1.210261] dwc_otg bcm2708_usb: DWC OTG Controller | |
172 | [ 1.210296] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1 | |
173 | [ 1.210327] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000 | |
174 | [ 1.210371] Init: Port Power? op_state=1 | |
175 | [ 1.210378] Init: Power Port (0) | |
176 | [ 1.210565] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
177 | [ 1.210578] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
178 | [ 1.210588] usb usb1: Product: DWC OTG Controller | |
179 | [ 1.210598] usb usb1: Manufacturer: Linux 3.18.6+ dwc_otg_hcd | |
180 | [ 1.210608] usb usb1: SerialNumber: bcm2708_usb | |
181 | [ 1.211193] hub 1-0:1.0: USB hub found | |
182 | [ 1.211232] hub 1-0:1.0: 1 port detected | |
183 | [ 1.211532] dwc_otg: FIQ enabled | |
184 | [ 1.211539] dwc_otg: NAK holdoff enabled | |
185 | [ 1.211546] dwc_otg: FIQ split-transaction FSM enabled | |
186 | [ 1.211573] Module dwc_common_port init | |
187 | [ 1.211778] usbcore: registered new interface driver usb-storage | |
188 | [ 1.212001] mousedev: PS/2 mouse device common for all mice | |
189 | [ 1.212651] bcm2835-cpufreq: min=600000 max=900000 | |
190 | [ 1.212894] sdhci: Secure Digital Host Controller Interface driver | |
191 | [ 1.212902] sdhci: Copyright(c) Pierre Ossman | |
192 | [ 1.213011] DMA channels allocated for the MMC driver | |
193 | [ 1.234804] Load BCM2835 MMC driver | |
194 | [ 1.234909] ledtrig-cpu: registered to indicate activity on CPUs | |
195 | [ 1.235012] hidraw: raw HID events driver (C) Jiri Kosina | |
196 | [ 1.235209] usbcore: registered new interface driver usbhid | |
197 | [ 1.235216] usbhid: USB HID core driver | |
198 | [ 1.236535] NET: Registered protocol family 17 | |
199 | [ 1.236681] Key type dns_resolver registered | |
200 | [ 1.237332] Registering SWP/SWPB emulation handler | |
201 | [ 1.237811] zswap: loading zswap | |
202 | [ 1.237820] zpool: creating pool type zbud | |
203 | [ 1.237831] zpool: created zbud pool | |
204 | [ 1.237839] zswap: using zbud pool | |
205 | [ 1.237880] zswap: using lz4 compressor | |
206 | [ 1.239635] Btrfs loaded | |
207 | [ 1.240250] Waiting for root device /dev/mmcblk0p2... | |
208 | [ 1.276810] mmc0: host does not support reading read-only switch, assuming write-enable | |
209 | [ 1.279045] mmc0: new high speed SDHC card at address 0007 | |
210 | [ 1.279359] mmcblk0: mmc0:0007 SD8GB 7.42 GiB | |
211 | [ 1.282378] mmcblk0: p1 p2 p3 | |
212 | [ 1.343310] BTRFS: device label xbian devid 1 transid 118 /dev/root | |
213 | [ 1.346600] BTRFS info (device mmcblk0p2): enabling auto defrag | |
214 | [ 1.346627] BTRFS info (device mmcblk0p2): disk space caching is enabled | |
215 | [ 1.346635] BTRFS: has skinny extents | |
216 | [ 1.375335] BTRFS: detected SSD devices, enabling SSD mode | |
217 | [ 1.395854] VFS: Mounted root (btrfs filesystem) on device 0:12. | |
218 | [ 1.398095] devtmpfs: mounted | |
219 | [ 1.398335] Freeing unused kernel memory: 188K (8065f000 - 8068e000) | |
220 | [ 1.398343] BFS CPU scheduler v0.460 by Con Kolivas. | |
221 | [ 1.410899] Indeed it is in host mode hprt0 = 00021501 | |
222 | [ 1.572887] usb 1-1: new high-speed USB device number 2 using dwc_otg | |
223 | [ 1.573027] Indeed it is in host mode hprt0 = 00001101 | |
224 | [ 1.746091] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 | |
225 | [ 1.746113] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
226 | [ 1.746823] hub 1-1:1.0: USB hub found | |
227 | [ 1.746919] hub 1-1:1.0: 5 ports detected | |
228 | [ 1.825112] random: init urandom read with 44 bits of entropy available | |
229 | [ 2.019951] usb 1-1.1: new high-speed USB device number 3 using dwc_otg | |
230 | [ 2.104108] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 | |
231 | [ 2.104130] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
232 | [ 2.106779] smsc95xx v1.0.4 | |
233 | [ 2.146523] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:14:7f:9b | |
234 | [ 2.220025] usb 1-1.3: new high-speed USB device number 4 using dwc_otg | |
235 | [ 2.306409] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0608 | |
236 | [ 2.306440] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
237 | [ 2.306451] usb 1-1.3: Product: USB2.0 Hub | |
238 | [ 2.307916] hub 1-1.3:1.0: USB hub found | |
239 | [ 2.308834] hub 1-1.3:1.0: 3 ports detected | |
240 | [ 2.383940] usb 1-1.4: new full-speed USB device number 5 using dwc_otg | |
241 | [ 2.477302] usb 1-1.4: New USB device found, idVendor=0609, idProduct=031d | |
242 | [ 2.477324] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
243 | [ 2.477335] usb 1-1.4: Product: eHome Infrared Transceiver | |
244 | [ 2.477345] usb 1-1.4: Manufacturer: SMK | |
245 | [ 2.477354] usb 1-1.4: SerialNumber: SM002Fba | |
246 | [ 2.584066] usb 1-1.3.1: new full-speed USB device number 6 using dwc_otg | |
247 | [ 2.663795] usb 1-1.3.1: New USB device found, idVendor=1038, idProduct=1202 | |
248 | [ 2.663808] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
249 | [ 2.663818] usb 1-1.3.1: Product: SteelSeries Apex Gaming Keyboard | |
250 | [ 2.663828] usb 1-1.3.1: Manufacturer: SteelSeries | |
251 | [ 2.668947] hid-generic 0003:1038:1202.0001: hiddev0,hidraw0: USB HID v1.11 Device [SteelSeries SteelSeries Apex Gaming Keyboard] on usb-bcm2708_usb-1.3.1/input0 | |
252 | [ 2.673064] input: SteelSeries SteelSeries Apex Gaming Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/0003:1038:1202.0002/input/input0 | |
253 | [ 2.673411] hid-generic 0003:1038:1202.0002: input,hidraw1: USB HID v1.11 Keyboard [SteelSeries SteelSeries Apex Gaming Keyboard] on usb-bcm2708_usb-1.3.1/input1 | |
254 | [ 2.677082] input: SteelSeries SteelSeries Apex Gaming Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.2/0003:1038:1202.0003/input/input1 | |
255 | [ 2.677395] hid-generic 0003:1038:1202.0003: input,hidraw2: USB HID v1.11 Device [SteelSeries SteelSeries Apex Gaming Keyboard] on usb-bcm2708_usb-1.3.1/input2 | |
256 | [ 3.788757] random: nonblocking pool is initialized | |
257 | [ 4.710394] BTRFS info (device mmcblk0p2): disk space caching is enabled | |
258 | [ 5.899310] init: xbian-failaccess main process (231) killed by TERM signal | |
259 | [ 6.602877] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup | |
260 | [ 6.730924] vchiq: vchiq_init_state: slot_zero = 0xae000000, is_master = 0 | |
261 | [ 7.009708] udevd[707]: starting version 175 | |
262 | [ 7.423851] Registered IR keymap rc-rc6-mce | |
263 | [ 7.424346] input: Media Center Ed. eHome Infrared Remote Transceiver (0609:031d) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.0/rc/rc0/input2 | |
264 | [ 7.424633] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0609:031d) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.0/rc/rc0 | |
265 | [ 7.455728] IR NEC protocol handler initialized | |
266 | [ 7.461570] IR JVC protocol handler initialized | |
267 | [ 7.461573] IR RC6 protocol handler initialized | |
268 | [ 7.467859] IR RC5(x/sz) protocol handler initialized | |
269 | [ 7.479252] IR Sony protocol handler initialized | |
270 | [ 7.487997] IR SANYO protocol handler initialized | |
271 | [ 7.492963] IR Sharp protocol handler initialized | |
272 | [ 7.500435] IR XMP protocol handler initialized | |
273 | [ 7.502484] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input3 | |
274 | [ 7.503087] IR MCE Keyboard/mouse protocol handler initialized | |
275 | [ 7.515221] lirc_dev: IR Remote Control driver registered, major 247 | |
276 | [ 7.528251] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0 | |
277 | [ 7.528351] IR LIRC bridge handler initialized | |
278 | [ 7.638868] mceusb 1-1.4:1.0: Registered SMK eHome Infrared Transceiver with mce emulator interface version 1 | |
279 | [ 7.638896] mceusb 1-1.4:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active) | |
280 | [ 7.639116] usbcore: registered new interface driver mceusb | |
281 | [ 8.190091] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 | |
282 | [ 9.648908] init: failsafe main process (97) killed by TERM signal | |
283 | [ 17.784049] init: wait-for-state (xbmcxbmc-loaded) main process (1120) killed by TERM signal | |
284 | [ 24.904587] init: xbmc-failed-start main process (542) killed by TERM signal | |
285 | [ 24.948786] init: wait-for-state (zram-swapxbmc-done) main process (992) killed by TERM signal | |
286 | [ 25.321212] Adding 250876k swap on /dev/mmcblk0p3. Priority:0 extents:1 across:250876k SSFS | |
287 | [ 33.314341] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). | |
288 | [ 87.976300] usb 1-1.3: USB disconnect, device number 4 | |
289 | [ 87.976322] usb 1-1.3.1: USB disconnect, device number 6 |