reportbug --template linux-image-$(uname -r

matt@matt-desktop:~$ reportbug --template linux-image-$(uname -r)
Detected character set: UTF-8
Please change your locale if this is incorrect.

Using 'Matt Harrison <[email protected]>' as your from address.
Getting status for linux-image-3.2.0-3-amd64...
Will send report to Debian (per lsb_release).
Maintainer for linux-image-3.2.0-3-amd64 is 'Debian Kernel Team <[email protected]>'.
Looking up dependencies of linux-image-3.2.0-3-amd64...
Getting status for related package src:linux...
Looking up status of additional packages...

Rewriting subject to 'linux-image-3.2.0-3-amd64: none'
Gathering additional data, this may take a while...
Include network configuration and status from this computer? n
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
From: Matt Harrison <[email protected]>
To: Debian Bug Tracking System <[email protected]>
Subject: linux-image-3.2.0-3-amd64: none
X-Debbugs-Cc: [email protected]

Package: src:linux
Version: 3.2.23-1
Severity: wishlist

Dear Maintainer,
*** Please consider answering these questions, where appropriate ***

   * What led up to the situation?
   * What exactly did you do (or not do) that was effective (or
     ineffective)?
   * What was the outcome of this action?
   * What outcome did you expect instead?

*** End of the template - remove these lines ***


-- Package-specific info:
** Version:
Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=b6579d5f-05bd-4db5-ac12-8729571566af ro quiet

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[    6.499888] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 14 2
[    6.499890] [drm] nouveau 0000:02:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
[    6.499892] [drm] nouveau 0000:02:00.0:   1: 0x00000200: type 0x00 idx 1 tag 0xff
[    6.499894] [drm] nouveau 0000:02:00.0:   2: 0x00000110: type 0x10 idx 2 tag 0xff
[    6.499896] [drm] nouveau 0000:02:00.0:   3: 0x00000111: type 0x11 idx 3 tag 0xff
[    6.499897] [drm] nouveau 0000:02:00.0:   4: 0x00000113: type 0x13 idx 4 tag 0xff
[    6.499901] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xC1F1
[    6.522914] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xC53D
[    6.539129] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xD17E
[    6.539136] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xD270
[    6.540202] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xD46A
[    6.540204] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xD4CF
[    6.560050] [drm] nouveau 0000:02:00.0: 0xD4CF: Condition still not met after 20ms, skipping following opcodes
[    6.560128] usb 1-2: reset high-speed USB device number 3 using ehci_hcd
[    6.578810] [drm] nouveau 0000:02:00.0: 1 available performance level(s)
[    6.578814] [drm] nouveau 0000:02:00.0: 0: core 459MHz shader 918MHz memory 330MHz fanspeed 100%
[    6.578825] [drm] nouveau 0000:02:00.0: c: core 459MHz shader 918MHz memory 300MHz
[    6.580097] [TTM] Zone  kernel: Available graphics memory: 4100156 kiB.
[    6.580100] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[    6.580101] [TTM] Initializing pool allocator.
[    6.580113] [drm] nouveau 0000:02:00.0: Detected 512MiB VRAM
[    6.580930] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[    6.588813] [drm] nouveau 0000:02:00.0: DCB encoder 1 unknown
[    6.588836] [drm] nouveau 0000:02:00.0: TV-1 has no encoders, removing
[    6.599946] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.599948] [drm] No driver support for vblank timestamp query.
[    6.754123] [drm] nouveau 0000:02:00.0: allocated 1600x900 fb: 0x320000, bo ffff880233c1b400
[    6.754253] fbcon: nouveaufb (fb0) is primary device
[    6.772155] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    6.773564] Registered led device: rt2800usb-phy0::radio
[    6.773614] Registered led device: rt2800usb-phy0::assoc
[    6.773664] Registered led device: rt2800usb-phy0::quality
[    6.773724] usbcore: registered new interface driver rt2800usb
[    6.799813] Console: switching to colour frame buffer device 200x56
[    6.801778] fb0: nouveaufb frame buffer device
[    6.801779] drm: registered panic notifier
[    6.801784] [drm] Initialized nouveau 1.0.0 20120316 for 0000:02:00.0 on minor 0
[    7.941174] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[    8.917089] Adding 7811068k swap on /dev/sdb1.  Priority:-1 extents:1 across:7811068k
[    8.955929] EXT4-fs (sdb5): re-mounted. Opts: (null)
[    9.465640] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[    9.610670] loop: module loaded
[   11.100254] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[   11.270772] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[   12.217389] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[   12.217601] forcedeth 0000:00:07.0: eth0: no link during initialization
[   12.220926] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.308391] RPC: Registered named UNIX socket transport module.
[   12.308399] RPC: Registered udp transport module.
[   12.308405] RPC: Registered tcp transport module.
[   12.308410] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.341752] FS-Cache: Loaded
[   12.497660] FS-Cache: Netfs 'nfs' registered for caching
[   12.510935] Installing knfsd (copyright (C) 1996 [email protected]).
[   15.744545] vboxdrv: Found 4 processor cores.
[   15.744992] vboxdrv: fAsync=0 offMin=0xa95 offMax=0xc963
[   15.745187] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   15.745194] vboxdrv: Successfully loaded version 4.1.22 (interface 0x00190000).
[   16.379011] vboxpci: IOMMU not found (not registered)
[   16.578494] lp0: using parport0 (interrupt-driven).
[   16.661382] ppdev: user-space parallel port driver
[   20.928269] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   34.427589] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   44.712754] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[   44.712968] forcedeth 0000:00:07.0: eth0: no link during initialization
[   44.716239] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   45.327130] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   48.986740] wlan0: authenticate with 08:86:3b:33:1d:5e (try 1)
[   48.988260] wlan0: authenticated
[   48.988335] wlan0: associate with 08:86:3b:33:1d:5e (try 1)
[   48.992102] wlan0: RX AssocResp from 08:86:3b:33:1d:5e (capab=0x411 status=0 aid=2)
[   48.992112] wlan0: associated
[   49.022556] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   59.600048] wlan0: no IPv6 routers present
[76205.680081] usb 1-5: new high-speed USB device number 5 using ehci_hcd
[76205.815108] usb 1-5: New USB device found, idVendor=1004, idProduct=6317
[76205.815119] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[76205.815126] usb 1-5: Product: LG Android USB Device
[76205.815132] usb 1-5: Manufacturer: LG Electronics Inc.
[76205.815137] usb 1-5: SerialNumber: LGOTMS43d6ec
[76205.819953] scsi7 : usb-storage 1-5:1.7
[76205.895311] cdc_ether 1-5:1.5: usb0: register 'cdc_ether' at usb-0000:00:02.1-5, CDC Ethernet Device, ae:cb:74:42:86:13
[76205.895498] usbcore: registered new interface driver cdc_ether
[76205.897085] cdc_acm 1-5:1.0: This device cannot do calls on its own. It is not a modem.
[76205.897306] cdc_acm 1-5:1.0: ttyACM0: USB ACM device
[76205.898531] usbcore: registered new interface driver cdc_acm
[76205.898540] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[76206.821308] scsi 7:0:0:0: Direct-Access     LGE      Mass storage     0100 PQ: 0 ANSI: 2
[76206.823638] sd 7:0:0:0: Attached scsi generic sg4 type 0
[76206.826304] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[87887.073143] reportbug[989] trap divide error ip:7f1546b56470 sp:7f15406b5f40 error:0 in libgtk-x11-2.0.so.0.2400.10[7f1546a24000+432000]
[88750.118773] usb 1-5: USB disconnect, device number 5
[88750.119685] cdc_ether 1-5:1.5: usb0: unregister 'cdc_ether' usb-0000:00:02.1-5, CDC Ethernet Device
[105757.284106] ieee80211 phy0: wlan0: No probe response from AP 08:86:3b:33:1d:5e after 500ms, disconnecting.
[105757.389538] cfg80211: Calling CRDA to update world regulatory domain
[105758.766927] wlan0: authenticate with 08:86:3b:33:1d:5e (try 1)
[105758.768465] wlan0: authenticated
[105758.772810] wlan0: associate with 08:86:3b:33:1d:5e (try 1)
[105758.777979] wlan0: RX AssocResp from 08:86:3b:33:1d:5e (capab=0x411 status=0 aid=3)
[105758.777989] wlan0: associated

** Model information
sys_vendor: BIOSTAR Group
product_name: N68S3+
product_version:
chassis_vendor: BIOSTAR Group
chassis_version:
bios_vendor: American Megatrends Inc.
bios_version: 080015
board_vendor: BIOSTAR Group
board_name: N68S3+
board_version:

** Loaded modules:
cdc_acm
cdc_ether
usbnet
mii
cryptd
aes_x86_64
aes_generic
ppdev
lp
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
snd_hda_codec_realtek
arc4
rt2800usb
rt2x00usb
rt2800lib
rt2x00lib
nouveau
mac80211
cfg80211
rfkill
mxm_wmi
crc_ccitt
wmi
video
ttm
drm_kms_helper
snd_hda_intel
snd_hda_codec
snd_hwdep
drm
snd_pcm
snd_page_alloc
parport_pc
i2c_algo_bit
i2c_nforce2
evdev
i2c_core
parport
pcspkr
snd_seq
snd_seq_device
snd_timer
powernow_k8
snd
k10temp
edac_mce_amd
edac_core
mperf
processor
button
soundcore
ext4
crc16
jbd2
mbcache
sr_mod
sg
cdrom
sd_mod
crc_t10dif
usb_storage
usbhid
hid
uas
ata_generic
sata_nv
ohci_hcd
pata_amd
thermal
thermal_sys
libata
scsi_mod
forcedeth
ehci_hcd
usbcore
usb_common

** PCI devices:
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP61 Memory Controller [10de:03ea] (rev a1)
	Subsystem: Biostar Microtech Int'l Corp Device [1565:3407]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP61 LPC Bridge [10de:03e1] (rev a2)
	Subsystem: Biostar Microtech Int'l Corp Device [1565:3407]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: I/O ports at 4f00 [size=256]

00:01.1 SMBus [0c05]: NVIDIA Corporation MCP61 SMBus [10de:03eb] (rev a2)
	Subsystem: Biostar Microtech Int'l Corp Device [1565:3407]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 4900 [size=64]
	Region 4: I/O ports at 4d00 [size=64]
	Region 5: I/O ports at 4e00 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: nForce2_smbus

00:01.2 RAM memory [0500]: NVIDIA Corporation MCP61 Memory Controller [10de:03f5] (rev a2)
	Subsystem: Biostar Microtech Int'l Corp Device [1565:3407]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:02.0 USB controller [0c03]: NVIDIA Corporation MCP61 USB 1.1 Controller [10de:03f1] (rev a3) (prog-if 10 [OHCI])
	Subsystem: Biostar Microtech Int'l Corp Device [1565:3407]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at dbfff000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:02.1 USB controller [0c03]: NVIDIA Corporation MCP61 USB 2.0 Controller [10de:03f2] (rev a3) (prog-if 20 [EHCI])
	Subsystem: Biostar Microtech Int'l Corp Device [1565:3407]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 22
	Region 0: Memory at dbffec00 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:04.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI bridge [10de:03f3] (rev a1) (prog-if 01 [Subtractive decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:05.0 Audio device [0403]: NVIDIA Corporation MCP61 High Definition Audio [10de:03f0] (rev a2)
	Subsystem: Biostar Microtech Int'l Corp Device [1565:821f]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin B routed to IRQ 22
	Region 0: Memory at dbff8000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:06.0 IDE interface [0101]: NVIDIA Corporation MCP61 IDE [10de:03ec] (rev a2) (prog-if 8a [Master SecP PriP])
	Subsystem: Biostar Microtech Int'l Corp Device [1565:3407]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
	Region 4: I/O ports at ffa0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: pata_amd

00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2)
	Subsystem: Biostar Microtech Int'l Corp Device [1565:3407]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 43
	Region 0: Memory at dbffd000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at d080 [size=8]
	Capabilities: <access denied>
	Kernel driver in use: forcedeth

00:08.0 IDE interface [0101]: NVIDIA Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
	Subsystem: Biostar Microtech Int'l Corp Device [1565:5405]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 20
	Region 0: I/O ports at d000 [size=8]
	Region 1: I/O ports at cc00 [size=4]
	Region 2: I/O ports at c880 [size=8]
	Region 3: I/O ports at c800 [size=4]
	Region 4: I/O ports at c480 [size=16]
	Region 5: Memory at dbffc000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv

00:08.1 IDE interface [0101]: NVIDIA Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
	Subsystem: Biostar Microtech Int'l Corp Device [1565:5405]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 23
	Region 0: I/O ports at c400 [size=8]
	Region 1: I/O ports at c080 [size=4]
	Region 2: I/O ports at c000 [size=8]
	Region 3: I/O ports at bc00 [size=4]
	Region 4: I/O ports at b880 [size=16]
	Region 5: Memory at dbff7000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv

00:09.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge [10de:03e8] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: dc000000-dfffffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

02:00.0 VGA compatible controller [0300]: NVIDIA Corporation G86 [GeForce 8400 GS] [10de:0422] (rev a1) (prog-if 00 [VGA controller])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at dc000000 (64-bit, non-prefetchable) [size=32M]
	Region 5: I/O ports at ec00 [size=128]
	Expansion ROM at defe0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 1737:0078 Linksys WUSB100 v2 RangePlus Wireless Network Adapter [Ralink RT3070]
Bus 001 Device 004: ID 0bc2:0503 Seagate RSS LLC
Bus 002 Device 002: ID 05fe:1010 Chic Technology Corp. Optical Wireless


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-3-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.46
ii  initramfs-tools [linux-initramfs-tool]  0.107
ii  kmod                                    9-1
ii  linux-base                              3.5
ii  module-init-tools                       9-1

Versions of packages linux-image-3.2.0-3-amd64 recommends:
pn  firmware-linux-free  <none>

Versions of packages linux-image-3.2.0-3-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 1.99-22.1
pn  linux-doc-3.2           <none>

Versions of packages linux-image-3.2.0-3-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
ii  firmware-ralink         0.36
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.2.0-3-amd64/postinst/depmod-error-initrd-3.2.0-3-amd64: false
  linux-image-3.2.0-3-amd64/postinst/ignoring-ramdisk:
  linux-image-3.2.0-3-amd64/postinst/missing-firmware-3.2.0-3-amd64:
  linux-image-3.2.0-3-amd64/prerm/removing-running-kernel-3.2.0-3-amd64: true

If you want to provide additional information, please wait to receive the bug
tracking number via email; you may then send any extra information to
[email protected] (e.g. [email protected]), where n is the bug number.
Normally you will receive an acknowledgement via email including the bug report
number within an hour; if you haven't received a confirmation, then the bug
reporting process failed at some point (reportbug or MTA failure, BTS
maintenance, etc.).