Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.1 2013-03-16 r3800 [x86_64-apple-darwin12.3.0] (local build)
- Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: Crucial_CT1024M550SSD1
- Serial Number: 14020C00F20F
- LU WWN Device Id: 5 00a075 10c00f20f
- Firmware Version: MU01
- User Capacity: 1,024,209,543,168 bytes [1.02 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: Solid State Device
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Tue Jun 3 13:08:54 2014 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF ENABLE/DISABLE COMMANDS SECTION ===
- SMART Enabled.
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 112) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: ( 4765) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 12) minutes.
- Conveyance self-test routine
- recommended polling time: ( 3) minutes.
- SCT capabilities: (0x0035) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 61
- 5 Reallocated_Sector_Ct 0x0033 100 100 000 Pre-fail Always - 0
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 178
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 116
- 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 173 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 3
- 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 30
- 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 8892
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 2
- 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 1571
- 194 Temperature_Celsius 0x0022 055 049 000 Old_age Always - 45 (Min/Max 20/51)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 16
- 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1
- 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
- 202 Unknown_SSD_Attribute 0x0031 100 100 000 Pre-fail Offline - 0
- 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
- 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6620341439
- 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 207022753
- 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 79142413
- SMART Error Log Version: 1
- ATA Error Count: 0
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
- When the command that caused the error occurred, the device was in an unknown state.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 88 0c 51 e0 Error: UNC 1 sectors at LBA = 0x00510c88 = 5311624
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 01 88 0c 51 e0 00 7d+09:19:00.000 READ DMA EXT
- 25 00 01 88 0c 51 e0 00 7d+09:19:00.000 READ DMA EXT
- 25 00 01 88 0c 51 e0 00 7d+09:19:00.000 READ DMA EXT
- 25 00 01 88 0c 51 e0 00 7d+09:19:00.000 READ DMA EXT
- 25 00 01 88 0c 51 e0 00 7d+09:19:00.000 READ DMA EXT
- Error -1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
- When the command that caused the error occurred, the device was in an unknown state.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 88 0c 51 e0 Error: UNC 1 sectors at LBA = 0x00510c88 = 5311624
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 01 88 0c 51 e0 00 7d+09:19:00.000 READ DMA EXT
- 25 00 01 88 0c 51 e0 00 7d+09:19:00.000 READ DMA EXT
- 25 00 01 88 0c 51 e0 00 7d+09:19:00.000 READ DMA EXT
- 25 00 01 88 0c 51 e0 00 7d+09:19:00.000 READ DMA EXT
- 25 00 01 88 0c 51 e0 00 7d+09:19:00.000 READ DMA EXT
- Error -2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
- When the command that caused the error occurred, the device was in an unknown state.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 88 0c 51 e0 Error: UNC 1 sectors at LBA = 0x00510c88 = 5311624
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 01 88 0c 51 e0 00 7d+09:19:00.000 READ DMA EXT
- 25 00 01 88 0c 51 e0 00 7d+09:19:00.000 READ DMA EXT
- 25 00 01 88 0c 51 e0 00 7d+09:19:00.000 READ DMA EXT
- 25 00 01 88 0c 51 e0 00 7d+09:19:00.000 READ DMA EXT
- 25 00 01 88 0c 51 e0 00 7d+09:19:00.000 READ DMA EXT
- Error -3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
- When the command that caused the error occurred, the device was in an unknown state.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 88 0c 51 e0 Error: UNC 1 sectors at LBA = 0x00510c88 = 5311624
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 01 88 0c 51 e0 00 7d+09:19:00.000 READ DMA EXT
- 2f 00 01 10 00 00 e0 00 7d+09:19:00.000 READ LOG EXT
- 60 00 01 88 0c 51 40 00 7d+09:19:00.000 READ FPDMA QUEUED
- 60 00 01 87 0c 51 40 00 7d+09:19:00.000 READ FPDMA QUEUED
- 60 00 01 86 0c 51 40 00 7d+09:19:00.000 READ FPDMA QUEUED
- Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
- When the command that caused the error occurred, the device was in an unknown state.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 88 0c 51 40 Error: UNC at LBA = 0x00510c88 = 5311624
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 01 88 0c 51 40 00 7d+09:19:00.000 READ FPDMA QUEUED
- 60 00 01 87 0c 51 40 00 7d+09:19:00.000 READ FPDMA QUEUED
- 60 00 01 86 0c 51 40 00 7d+09:19:00.000 READ FPDMA QUEUED
- 60 00 01 85 0c 51 40 00 7d+09:19:00.000 READ FPDMA QUEUED
- 60 00 01 84 0c 51 40 00 7d+09:19:00.000 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed: read failure 00% 178 177219864
- # 2 Short offline Completed without error 00% 178 -
- # 3 Short offline Interrupted (host reset) 00% 178 -
- # 4 Extended offline Interrupted (host reset) 00% 178 -
- # 5 Short offline Completed without error 00% 177 -
- # 6 Short offline Completed without error 00% 177 -
- # 7 Short offline Completed without error 00% 177 -
- # 8 Short offline Completed without error 00% 175 -
- # 9 Short offline Aborted by host 00% 172 -
- #10 Short offline Completed without error 00% 172 -
- #11 Short offline Completed without error 00% 170 -
- #12 Short offline Completed without error 00% 115 -
- #13 Short offline Completed without error 00% 115 -
- #14 Short offline Completed without error 00% 88 -
- #15 Short offline Completed without error 00% 82 -
- #16 Short offline Completed without error 00% 38 -
- #17 Short offline Completed without error 00% 29 -
- #18 Short offline Completed without error 00% 20 -
- #19 Short offline Completed without error 00% 13 -
- #20 Short offline Completed without error 00% 12 -
- #21 Short offline Completed without error 00% 12 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement