Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2013.07 (Aug 19 2013 - 18:00:17)
- Board: Cubieboard2
- DRAM: 1024 MiB
- CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
- SUNXI SD/MMC: 0
- U-Boot 2013.07 (Aug 19 2013 - 18:00:17) Allwinner Technology
- CPU: Allwinner A20 (SUN7I)
- Board: Cubieboard2
- I2C: ready
- DRAM: 1 GiB
- MMC: SUNXI SD/MMC: 0
- *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- Net: emac
- Hit any key to stop autoboot: 0
- reading uEnv.txt
- ** Unable to read file uEnv.txt **
- Failed to mount ext2 filesystem...
- ** Unrecognized filesystem type **
- Failed to mount ext2 filesystem...
- ** Unrecognized filesystem type **
- reading boot.scr
- 241 bytes read in 4 ms (58.6 KiB/s)
- Jumping to boot.scr
- ## Executing script at 44000000
- reading script.bin
- 43628 bytes read in 10 ms (4.2 MiB/s)
- reading uImage
- 4243156 bytes read in 284 ms (14.2 MiB/s)
- ## Booting kernel from Legacy Image at 48000000 ...
- Image Name: Linux-3.0.76
- Created: 2013-08-19 16:06:39 UTC
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 4243092 Bytes = 4 MiB
- Load Address: 40008000
- Entry Point: 40008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- Starting kernel ...
- <6>Initializing cgroup subsys cpuset
- <5>Linux version 3.0.76 (parallels@parallels-Parallels-Virtual-Platform) (gcc v3
- CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
- CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Machine: sun4i
- <6>Memory cut off:
- <6> MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
- <4>Ignoring unrecognised tag 0x00000000
- <6>Memory Reserved:
- <6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
- <6> VE : 0x44000000 - 0x48ffffff ( 80 MB)
- <6> G2D : 0x49000000 - 0x49ffffff ( 16 MB)
- <6> LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
- Memory policy: ECC disabled, Data cache writeback
- <6>chip-id: Unknown (AW1651 revision A)
- <7>On node 0 totalpages: 245760
- <7>free_area_init_node: node 0, pgdat c07f1830, node_mem_map c08b9000
- <7> Normal zone: 1280 pages used for memmap
- <7> Normal zone: 0 pages reserved
- <7> Normal zone: 146176 pages, LIFO batch:31
- <7> HighMem zone: 768 pages used for memmap
- <7> HighMem zone: 97536 pages, LIFO batch:31
- <7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- <7>pcpu-alloc: [0] 0
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
- <5>Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic0
- <6>PID hash table entries: 4096 (order: 2, 16384 bytes)
- <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>Memory: 448MB 512MB = 960MB total
- <5>Memory: 834448k/834448k available, 148592k reserved, 393216K highmem
- <5>Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
- lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .init : 0xc0008000 - 0xc0030000 ( 160 kB)
- .text : 0xc0030000 - 0xc07ac5b8 (7666 kB)
- .data : 0xc07ae000 - 0xc07fadd0 ( 308 kB)
- .bss : 0xc07fadf4 - 0xc08b8698 ( 759 kB)
- <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- <6>NR_IRQS:128 nr_irqs:128 128
- <6>timer0: Periodic Mode
- <6>Console: colour dummy device 80x30
- <6>Calibrating delay loop...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement