API tools faq
paste
Guest User

Untitled

a guest
Jan 28th, 2017
518
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.75 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.4.14 (sunderland93@Debian-PC) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 50082) ) #1 Sat Jan 28 06:59:02 UTC 2017
  2. [ 0.000000] MyLoader: sysp=1d077ffa, boardp=e14ac615, parts=09838996
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  5. [ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] No valid device tree found, continuing without
  10. [ 0.000000] Zone ranges:
  11. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  12. [ 0.000000] Movable zone start for each node
  13. [ 0.000000] Early memory node ranges
  14. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  15. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  16. [ 0.000000] On node 0 totalpages: 16384
  17. [ 0.000000] free_area_init_node: node 0, pgdat 8040e3d0, node_mem_map 81000000
  18. [ 0.000000] Normal zone: 128 pages used for memmap
  19. [ 0.000000] Normal zone: 0 pages reserved
  20. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  21. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  22. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  23. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  24. [ 0.000000] pcpu-alloc: [0] 0
  25. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  26. [ 0.000000] Kernel command line: board=TL-WR842N-v3 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
  27. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  28. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  29. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  30. [ 0.000000] Writing ErrCtl register=00000000
  31. [ 0.000000] Readback ErrCtl register=00000000
  32. [ 0.000000] Memory: 60100K/65536K available (2974K kernel code, 174K rwdata, 756K rodata, 312K init, 200K bss, 5436K reserved, 0K cma-reserved)
  33. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  34. [ 0.000000] NR_IRQS:51
  35. [ 0.000000] Clocks: CPU:650.000MHz, DDR:393.188MHz, AHB:216.666MHz, Ref:25.000MHz
  36. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns
  37. [ 0.000009] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns
  38. [ 0.008245] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688)
  39. [ 0.071114] pid_max: default: 32768 minimum: 301
  40. [ 0.076136] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. [ 0.083120] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  42. [ 0.093694] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  43. [ 0.104928] NET: Registered protocol family 16
  44. [ 0.111338] MIPS: machine is TP-LINK TL-WR842N/ND v3
  45. [ 0.574588] clocksource: Switched to clocksource MIPS
  46. [ 0.581441] NET: Registered protocol family 2
  47. [ 0.587000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  48. [ 0.594379] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  49. [ 0.601160] TCP: Hash tables configured (established 1024 bind 1024)
  50. [ 0.608001] UDP hash table entries: 256 (order: 0, 4096 bytes)
  51. [ 0.614179] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  52. [ 0.621197] NET: Registered protocol family 1
  53. [ 0.625936] PCI: CLS 0 bytes, default 32
  54. [ 0.627071] futex hash table entries: 256 (order: -1, 3072 bytes)
  55. [ 0.651685] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  56. [ 0.657931] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  57. [ 0.671242] io scheduler noop registered
  58. [ 0.675463] io scheduler deadline registered (default)
  59. [ 0.681130] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  60. [ 0.688385] console [ttyS0] disabled
  61. [ 0.712323] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
  62. [ 0.721433] console [ttyS0] enabled
  63. [ 0.728990] bootconsole [early0] disabled
  64. [ 0.741249] m25p80 spi0.0: found gd25q128, expected m25p80
  65. [ 0.747024] m25p80 spi0.0: gd25q128 (16384 Kbytes)
  66. [ 0.753333] 5 tp-link partitions found on MTD device spi0.0
  67. [ 0.759168] Creating 5 MTD partitions on "spi0.0":
  68. [ 0.764123] 0x000000000000-0x000000020000 : "u-boot"
  69. [ 0.770955] 0x000000020000-0x000000166e28 : "kernel"
  70. [ 0.778032] 0x000000166e28-0x000000ff0000 : "rootfs"
  71. [ 0.785060] mtd: device 2 (rootfs) set to be root filesystem
  72. [ 0.790996] 1 squashfs-split partitions found on MTD device rootfs
  73. [ 0.797432] 0x000000410000-0x000000ff0000 : "rootfs_data"
  74. [ 0.804947] 0x000000ff0000-0x000001000000 : "art"
  75. [ 0.811663] 0x000000020000-0x000000ff0000 : "firmware"
  76. [ 0.841427] libphy: ag71xx_mdio: probed
  77. [ 1.437161] ag71xx-mdio.1: Found an AR934X built-in switch
  78. [ 1.480533] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
  79. [ 2.077547] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
  80. [ 2.087795] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
  81. [ 2.097129] NET: Registered protocol family 10
  82. [ 2.107286] NET: Registered protocol family 17
  83. [ 2.111990] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  84. [ 2.125251] 8021q: 802.1Q VLAN Support v1.8
  85. [ 2.136769] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  86. [ 2.146726] Freeing unused kernel memory: 312K (80432000 - 80480000)
  87. [ 3.102748] init: Console is alive
  88. [ 3.106656] init: - watchdog -
  89. [ 4.590813] usbcore: registered new interface driver usbfs
  90. [ 4.596672] usbcore: registered new interface driver hub
  91. [ 4.602264] usbcore: registered new device driver usb
  92. [ 4.656012] SCSI subsystem initialized
  93. [ 4.668075] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  94. [ 4.676777] ehci-platform: EHCI generic platform driver
  95. [ 4.682292] ehci-platform ehci-platform: EHCI Host Controller
  96. [ 4.688362] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  97. [ 4.698690] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
  98. [ 4.724628] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
  99. [ 4.732162] hub 1-0:1.0: USB hub found
  100. [ 4.736503] hub 1-0:1.0: 1 port detected
  101. [ 4.744446] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  102. [ 4.752705] ohci-platform: OHCI generic platform driver
  103. [ 4.763690] usbcore: registered new interface driver usb-storage
  104. [ 4.780518] init: - preinit -
  105. [ 5.212013] usb 1-1: new high-speed USB device number 2 using ehci-platform
  106. [ 5.292592] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  107. [ 5.321485] random: procd urandom read with 9 bits of entropy available
  108. [ 5.376960] hub 1-1:1.0: USB hub found
  109. [ 5.391571] hub 1-1:1.0: 4 ports detected
  110. [ 5.674607] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
  111. [ 5.846874] usb-storage 1-1.1:1.0: USB Mass Storage device detected
  112. [ 5.854288] scsi host0: usb-storage 1-1.1:1.0
  113. [ 5.954608] usb 1-1.2: new full-speed USB device number 4 using ehci-platform
  114. [ 6.866678] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
  115. [ 6.886533] scsi 0:0:0:1: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
  116. [ 6.898262] eth0: link up (1000Mbps/Full duplex)
  117. [ 6.903134] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  118. [ 6.914179] sd 0:0:0:1: [sda] Attached SCSI removable disk
  119. [ 8.656304] jffs2: notice: (413) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  120. [ 8.675912] mount_root: switching to jffs2 overlay
  121. [ 8.722483] eth0: link down
  122. [ 8.743296] procd: - early -
  123. [ 8.747068] procd: - watchdog -
  124. [ 9.506623] procd: - ubus -
  125. [ 9.806150] procd: - init -
  126. [ 11.107621] usb 1-1.1: USB disconnect, device number 3
  127. [ 11.484862] usb 1-1.1: new high-speed USB device number 5 using ehci-platform
  128. [ 11.850921] usb-storage 1-1.1:1.2: USB Mass Storage device detected
  129. [ 11.884909] scsi host1: usb-storage 1-1.1:1.2
  130. [ 12.896305] scsi 1:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
  131. [ 12.912121] sd 1:0:0:0: [sda] Attached SCSI removable disk
  132. [ 13.286648] ip6_tables: (C) 2000-2006 Netfilter Core Team
  133. [ 13.348419] usbcore: registered new interface driver cdc_wdm
  134. [ 13.366623] Loading modules backported from Linux version wt-2016-05-12-0-g7a54796
  135. [ 13.374451] Backport generated by backports.git backports-20160216-0-ge3c56e4
  136. [ 13.410763] ip_tables: (C) 2000-2006 Netfilter Core Team
  137. [ 13.437072] nf_conntrack version 0.5.0 (943 buckets, 3772 max)
  138. [ 13.473348] usbcore: registered new interface driver usblp
  139. [ 13.489503] usbcore: registered new interface driver usbserial
  140. [ 13.495780] usbcore: registered new interface driver usbserial_generic
  141. [ 13.502637] usbserial: USB Serial support registered for generic
  142. [ 13.533362] xt_time: kernel timezone is -0000
  143. [ 13.540195] usbcore: registered new interface driver ark3116
  144. [ 13.546260] usbserial: USB Serial support registered for ark3116
  145. [ 13.555118] usbcore: registered new interface driver belkin_sa
  146. [ 13.561272] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
  147. [ 13.620756] cdc_ether 1-1.1:1.0 eth2: register 'cdc_ether' at usb-ehci-platform-1.1, CDC Ethernet Device, 0c:5b:8f:27:9a:64
  148. [ 13.632596] usbcore: registered new interface driver cdc_ether
  149. [ 13.662823] usbcore: registered new interface driver cdc_ncm
  150. [ 13.746157] usbcore: registered new interface driver ch341
  151. [ 13.752007] usbserial: USB Serial support registered for ch341-uart
  152. [ 13.769981] usbcore: registered new interface driver cp210x
  153. [ 13.775980] usbserial: USB Serial support registered for cp210x
  154. [ 13.785271] usbcore: registered new interface driver cypress_m8
  155. [ 13.791504] usbserial: USB Serial support registered for DeLorme Earthmate USB
  156. [ 13.799151] usbserial: USB Serial support registered for HID->COM RS232 Adapter
  157. [ 13.806857] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
  158. [ 13.819574] usbcore: registered new interface driver ftdi_sio
  159. [ 13.825760] usbserial: USB Serial support registered for FTDI USB Serial Device
  160. [ 13.836315] usbcore: registered new interface driver huawei_cdc_ncm
  161. [ 13.900286] PPP generic driver version 2.4.2
  162. [ 13.908027] NET: Registered protocol family 24
  163. [ 13.915868] usbcore: registered new interface driver rndis_host
  164. [ 13.925212] usbcore: registered new interface driver sierra
  165. [ 13.931140] usbserial: USB Serial support registered for Sierra USB modem
  166. [ 13.942385] usbcore: registered new interface driver sierra_net
  167. [ 13.988956] usbcore: registered new interface driver ipw
  168. [ 13.994675] usbserial: USB Serial support registered for IPWireless converter
  169. [ 14.006008] usbcore: registered new interface driver option
  170. [ 14.011909] usbserial: USB Serial support registered for GSM modem (1-port)
  171. [ 14.048685] ath: EEPROM regdomain: 0x0
  172. [ 14.048712] ath: EEPROM indicates default country code should be used
  173. [ 14.048721] ath: doing EEPROM country->regdmn map search
  174. [ 14.048742] ath: country maps to regdmn code: 0x3a
  175. [ 14.048753] ath: Country alpha2 being used: US
  176. [ 14.048761] ath: Regpair used: 0x3a
  177. [ 14.060553] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  178. [ 14.065019] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=47
  179. [ 21.026892] device eth0 entered promiscuous mode
  180. [ 21.049365] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  181. [ 21.078395] cdc_ether 1-1.1:1.0 eth2: kevent 12 may have been dropped
  182. [ 21.119674] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  183. [ 22.626505] eth0: link up (1000Mbps/Full duplex)
  184. [ 22.631352] br-lan: port 1(eth0) entered forwarding state
  185. [ 22.637035] br-lan: port 1(eth0) entered forwarding state
  186. [ 22.674735] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  187. [ 24.634656] br-lan: port 1(eth0) entered forwarding state
  188. [ 24.995667] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  189. [ 25.028563] device wlan0 entered promiscuous mode
  190. [ 25.970804] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  191. [ 25.977703] br-lan: port 2(wlan0) entered forwarding state
  192. [ 25.983418] br-lan: port 2(wlan0) entered forwarding state
  193. [ 27.974608] br-lan: port 2(wlan0) entered forwarding state
  194. [ 44.906920] random: nonblocking pool is initialized
  195. [ 1442.659265] usb 1-1.2: USB disconnect, device number 4
  196. [ 1445.728545] usb 1-1.2: new full-speed USB device number 6 using ehci-platform
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!