Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- pi@raspberrypi:~/ws/bluez/monitor $ sudo ./btmon
- Bluetooth monitor ver 5.43
- = New Index: B8:27:EB:0A:8C:8D (Primary,UART,hci0) [hci0] 0.789164
- = New Index: 00:00:00:00:00:00 (Primary,UART,hci1) [hci1] 3.740238
- = Open Index: 00:00:00:00:00:00 [hci1] 3.740339
- < HCI Command: Reset (0x03|0x0003) plen 0 [hci1] 3.740391
- > HCI Event: Command Complete (0x0e) plen 4 [hci1] 3.741854
- Reset (0x03|0x0003) ncmd 1
- Status: Success (0x00)
- < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci1] 3.741930
- > HCI Event: Command Complete (0x0e) plen 12 [hci1] 3.743085
- Read Local Supported Features (0x04|0x0003) ncmd 1
- Status: Success (0x00)
- Features: 0x00 0x00 0x00 0x00 0x60 0x00 0x00 0x00
- BR/EDR Not Supported
- LE Supported (Controller)
- < HCI Command: Read Local Version Information (0x04|0x0001) plen 0 [hci1] 3.743141
- > HCI Event: Command Complete (0x0e) plen 12 [hci1] 3.743862
- Read Local Version Information (0x04|0x0001) ncmd 1
- Status: Success (0x00)
- HCI version: Bluetooth 4.2 (0x08) - Revision 0 (0x0000)
- LMP version: Bluetooth 4.2 (0x08) - Subversion 65535 (0xffff)
- Manufacturer: internal use (65535)
- < HCI Command: Read BD ADDR (0x04|0x0009) plen 0 [hci1] 3.743911
- > HCI Event: Command Complete (0x0e) plen 10 [hci1] 3.744771
- Read BD ADDR (0x04|0x0009) ncmd 1
- Status: Success (0x00)
- Address: 00:00:00:00:00:00 (OUI 00-00-00)
- < HCI Command: LE Read Buffer Size (0x08|0x0002) plen 0 [hci1] 3.744835
- > HCI Event: Command Complete (0x0e) plen 7 [hci1] 3.745831
- LE Read Buffer Size (0x08|0x0002) ncmd 1
- Status: Success (0x00)
- Data packet length: 27
- Num data packets: 7
- < HCI Command: LE Read Local Supported Features (0x08|0x0003) plen 0 [hci1] 3.745867
- > HCI Event: Command Complete (0x0e) plen 12 [hci1] 3.748757
- LE Read Local Supported Features (0x08|0x0003) ncmd 1
- Status: Success (0x00)
- Features: 0x3f 0x00 0x00 0x00 0x00 0x00 0x00 0x00
- LE Encryption
- Connection Parameter Request Procedure
- Extended Reject Indication
- Slave-initiated Features Exchange
- LE Ping
- LE Data Packet Length Extension
- < HCI Command: LE Read Supported States (0x08|0x001c) plen 0 [hci1] 3.748792
- > HCI Event: Command Complete (0x0e) plen 12 [hci1] 3.749767
- LE Read Supported States (0x08|0x001c) ncmd 1
- Status: Success (0x00)
- States: 0x000003ffffffffff
- Non-connectable Advertising State
- Scannable Advertising State
- Connectable Advertising State
- High Duty Cycle Directed Advertising State
- Passive Scanning State
- Active Scanning State
- Initiating State
- and Connection State (Master Role)
- Connection State (Slave Role)
- Non-connectable Advertising State
- and Passive Scanning State
- Scannable Advertising State
- and Passive Scanning State
- Connectable Advertising State
- and Passive Scanning State
- High Duty Cycle Directed Advertising State
- and Passive Scanning State
- Non-connectable Advertising State
- and Active Scanning State
- Scannable Advertising State
- and Active Scanning State
- Connectable Advertising State
- and Active Scanning State
- High Duty Cycle Directed Advertising State
- and Active Scanning State
- Non-connectable Advertising State
- and Initiating State
- Scannable Advertising State
- and Initiating State
- Non-connectable Advertising State
- and Connection State (Master Role)
- Scannable Advertising State
- and Connection State (Master Role)
- Non-connectable Advertising State
- and Connection State (Slave Role)
- Scannable Advertising State
- and Connection State (Slave Role)
- Passive Scanning State
- and Initiating State
- Active Scanning State
- and Initiating State
- Passive Scanning State
- and Connection State (Master Role)
- Active Scanning State
- and Connection State (Master Role)
- Passive Scanning State
- and Connection State (Slave Role)
- Active Scanning State
- and Connection State (Slave Role)
- Initiating State
- and Connection State (Master Role)
- and Master Role & Master Role
- Low Duty Cycle Directed Advertising State
- Low Duty Cycle Directed Advertising State
- and Passive Scanning State
- Low Duty Cycle Directed Advertising State
- and Active Scanning State
- Connectable Advertising State
- and Initiating State
- and Master Role & Slave Role
- High Duty Cycle Directed Advertising State
- and Initiating State
- and Master Role & Slave Role
- Low Duty Cycle Directed Advertising State
- and Initiating State
- and Master Role & Slave Role
- Connectable Advertising State
- and Connection State (Master Role)
- and Master Role & Slave Role
- High Duty Cycle Directed Advertising State
- and Connection State (Master Role)
- and Master Role & Slave Role
- Low Duty Cycle Directed Advertising State
- and Connection State (Master Role)
- and Master Role & Slave Role
- Connectable Advertising State
- and Connection State (Slave Role)
- and Master Role & Slave Role
- High Duty Cycle Directed Advertising State
- and Connection State (Slave Role)
- and Slave Role & Slave Role
- Low Duty Cycle Directed Advertising State
- and Connection State (Slave Role)
- and Slave Role & Slave Role
- Initiating State
- and Connection State (Slave Role)
- and Master Role & Slave Role
- < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 [hci1] 3.749787
- > HCI Event: Command Complete (0x0e) plen 68 [hci1] 3.750829
- Read Local Supported Commands (0x04|0x0002) ncmd 1
- Status: Success (0x00)
- Commands: 39 entries
- Disconnect (Octet 0 - Bit 5)
- Set Event Mask (Octet 5 - Bit 6)
- Reset (Octet 5 - Bit 7)
- Read Local Version Information (Octet 14 - Bit 3)
- Read Local Supported Features (Octet 14 - Bit 5)
- Read BD ADDR (Octet 15 - Bit 1)
- LE Set Event Mask (Octet 25 - Bit 0)
- LE Read Buffer Size (Octet 25 - Bit 1)
- LE Read Local Supported Features (Octet 25 - Bit 2)
- LE Set Random Address (Octet 25 - Bit 4)
- LE Set Advertising Parameters (Octet 25 - Bit 5)
- LE Read Advertising Channel TX Power (Octet 25 - Bit 6)
- LE Set Advertising Data (Octet 25 - Bit 7)
- LE Set Scan Response Data (Octet 26 - Bit 0)
- LE Set Advertise Enable (Octet 26 - Bit 1)
- LE Set Scan Parameters (Octet 26 - Bit 2)
- LE Set Scan Enable (Octet 26 - Bit 3)
- LE Create Connection (Octet 26 - Bit 4)
- LE Create Connection Cancel (Octet 26 - Bit 5)
- LE Read White List Size (Octet 26 - Bit 6)
- LE Clear White List (Octet 26 - Bit 7)
- LE Add Device To White List (Octet 27 - Bit 0)
- LE Remove Device From White List (Octet 27 - Bit 1)
- LE Connection Update (Octet 27 - Bit 2)
- LE Set Host Channel Classification (Octet 27 - Bit 3)
- LE Read Channel Map (Octet 27 - Bit 4)
- LE Read Remote Used Features (Octet 27 - Bit 5)
- LE Encrypt (Octet 27 - Bit 6)
- LE Rand (Octet 27 - Bit 7)
- LE Start Encryption (Octet 28 - Bit 0)
- LE Long Term Key Request Reply (Octet 28 - Bit 1)
- LE Long Term Key Request Neg Reply (Octet 28 - Bit 2)
- LE Read Supported States (Octet 28 - Bit 3)
- LE Remote Connection Parameter Request Reply (Octet 33 - Bit 4)
- LE Remote Connection Parameter Request Negative Reply (Octet 33 - Bit 5)
- LE Set Data Length (Octet 33 - Bit 6)
- LE Read Suggested Default Data Length (Octet 33 - Bit 7)
- LE Write Suggested Default Data Length (Octet 34 - Bit 0)
- LE Read Maximum Data Length (Octet 35 - Bit 3)
- < HCI Command: Set Event Mask (0x03|0x0001) plen 8 [hci1] 3.750876
- Mask: 0x200080000204e890
- Disconnection Complete
- Encryption Change
- Read Remote Version Information Complete
- Command Complete
- Command Status
- Hardware Error
- Number of Completed Packets
- Data Buffer Overflow
- Encryption Key Refresh Complete
- LE Meta
- > HCI Event: Command Complete (0x0e) plen 4 [hci1] 3.751785
- Set Event Mask (0x03|0x0001) ncmd 1
- Status: Success (0x00)
- < HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 [hci1] 3.751806
- Mask: 0x000000000000007f
- LE Connection Complete
- LE Advertising Report
- LE Connection Update Complete
- LE Read Remote Used Features Complete
- LE Long Term Key Request
- LE Remote Connection Parameter Request
- LE Data Length Change
- > HCI Event: Command Complete (0x0e) plen 4 [hci1] 3.752752
- LE Set Event Mask (0x08|0x0001) ncmd 1
- Status: Success (0x00)
- < HCI Command: LE Read Advertising Channel TX Power (0x08|0x0007) plen 0 [hci1] 3.752808
- > HCI Event: Command Complete (0x0e) plen 5 [hci1] 3.753767
- LE Read Advertising Channel TX Power (0x08|0x0007) ncmd 1
- Status: Success (0x00)
- TX power: 0 dBm
- < HCI Command: LE Read White List Size (0x08|0x000f) plen 0 [hci1] 3.753784
- > HCI Event: Command Complete (0x0e) plen 5 [hci1] 3.754814
- LE Read White List Size (0x08|0x000f) ncmd 1
- Status: Success (0x00)
- Size: 8
- < HCI Command: LE Clear White List (0x08|0x0010) plen 0 [hci1] 3.754831
- > HCI Event: Command Complete (0x0e) plen 4 [hci1] 3.755766
- LE Clear White List (0x08|0x0010) ncmd 1
- Status: Success (0x00)
- < HCI Command: LE Read Maximum Data Length (0x08|0x002f) plen 0 [hci1] 3.755784
- > HCI Event: Command Complete (0x0e) plen 12 [hci1] 3.756755
- LE Read Maximum Data Length (0x08|0x002f) ncmd 1
- Status: Success (0x00)
- Max TX octets: 27
- Max TX time: 328
- Max RX octets: 27
- Max RX time: 328
- < HCI Command: LE Read Suggested Default Data Length (0x08|0x0023) plen 0 [hci1] 3.756772
- > HCI Event: Command Complete (0x0e) plen 8 [hci1] 3.757773
- LE Read Suggested Default Data Length (0x08|0x0023) ncmd 1
- Status: Success (0x00)
- TX octets: 27
- TX time: 328
- = Index Info: 00:00:00:00:00:00 (internal use) [hci1] 3.757914
- = Close Index: 00:00:00:00:00:00 [hci1] 3.757938
- @ Index Added
- @ New Settings: 0x8200
- le static-addr
- @ New Settings: 0x8a00
- le secure-conn static-addr
- @ New Settings: 0x8a10
- bondable le secure-conn static-addr
- = Open Index: 00:00:00:00:00:00 [hci1] 28.557883
- < HCI Command: Reset (0x03|0x0003) plen 0 [hci1] 28.557924
- > HCI Event: Command Complete (0x0e) plen 4 [hci1] 28.559323
- Reset (0x03|0x0003) ncmd 1
- Status: Success (0x00)
Add Comment
Please, Sign In to add comment