Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- show run-config
- Press Enter to continue...
- System Inventory
- NAME: "Chassis" , DESCR: "Cisco 2500 Series Wireless LAN Controller"
- PID: AIR-CT2504-K9, VID: V01, SN: PSJ163200WG
- Burned-in MAC Address............................ D4:8C:B5:C2:A1:00
- Maximum number of APs supported.................. 15
- Press Enter to continue or <ctrl-z> to abort
- System Information
- Manufacturer's Name.............................. Cisco Systems Inc.
- Product Name..................................... Cisco Controller
- Product Version.................................. 7.0.230.0
- Bootloader Version............................... 1.0.16
- Field Recovery Image Version..................... 1.0.0
- Firmware Version................................. PIC 16.0
- Build Type....................................... DATA + WPS
- System Name...................................... Cisco_ZG
- System Location..................................
- System Contact...................................
- System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
- IP Address....................................... 192.168.1.20
- Last Reset....................................... Power on reset
- System Up Time................................... 7 days 1 hrs 14 mins 36 secs
- System Timezone Location.........................
- Current Boot License Level....................... base
- Current Boot License Type........................ Permanent
- Next Boot License Level.......................... base
- Next Boot License Type........................... Permanent
- Configured Country............................... BY - Belarus
- Operating Environment............................ Commercial (0 to 40 C)
- Internal Temp Alarm Limits....................... 0 to 65 C
- Internal Temperature............................. +26 C
- External Temperature............................. +32 C
- Fan Status....................................... 4400 rpm
- State of 802.11b Network......................... Enabled
- State of 802.11a Network......................... Disabled
- Number of WLANs.................................. 1
- Number of Active Clients......................... 27
- Burned-in MAC Address............................ D4:8C:B5:C2:A1:00
- Maximum number of APs supported.................. 15
- AP Bundle Information
- Primary AP Image Size
- ---------------- ----
- ap3g1 5804
- ap801 5192
- ap802 5232
- c1100 3096
- c1130 4972
- c1140 4992
- c1200 3364
- c1240 4812
- c1250 5512
- c1310 3136
- c1520 6412
- c3201 4324
- c602i 3716
- Secondary AP Image Size
- ------------------ ----
- ap3g1 5792
- ap801 5192
- --More or (q)uit current module or <ctrl-z> to abort
- ap802 5232
- c1100 3084
- c1130 4964
- c1140 4992
- c1200 3364
- c1240 4812
- c1250 5504
- c1310 3136
- c1520 6404
- c3201 4324
- c602i 3716
- Press Enter to continue or <ctrl-z> to abort
- Switch Configuration
- 802.3x Flow Control Mode......................... Disable
- FIPS prerequisite features....................... Disabled
- secret obfuscation............................... Enabled
- Strong Password Check Features:
- case-check ...........Disabled
- consecutive-check ....Disabled
- default-check .......Disabled
- username-check ......Disabled
- Press Enter to continue or <ctrl-z> to abort
- Network Information
- RF-Network Name............................. WiFi
- Web Mode.................................... Disable
- Secure Web Mode............................. Enable
- Secure Web Mode Cipher-Option High.......... Disable
- Secure Web Mode Cipher-Option SSLv2......... Enable
- OCSP........................................ Disabled
- OCSP responder URL..........................
- Secure Shell (ssh).......................... Enable
- Telnet...................................... Disable
- Ethernet Multicast Forwarding............... Disable
- Ethernet Broadcast Forwarding............... Disable
- AP Multicast/Broadcast Mode................. Multicast Address : 239.255.255.255
- IGMP snooping............................... Disabled
- IGMP timeout................................ 60 seconds
- IGMP Query Interval......................... 20 seconds
- User Idle Timeout........................... 300 seconds
- ARP Idle Timeout............................ 300 seconds
- Cisco AP Default Master..................... Disable
- AP Join Priority............................ Disable
- Mgmt Via Wireless Interface................. Enable
- Mgmt Via Dynamic Interface.................. Disable
- -More or (q)uit current module or <ctrl-z> to abort
- Bridge MAC filter Config.................... Enable
- Bridge Security Mode........................ EAP
- Mesh Full Sector DFS........................ Enable
- AP Fallback ................................ Enable
- Web Auth Redirect Ports .................... 80
- Web Auth Proxy Redirect ................... Disable
- Fast SSID Change ........................... Disabled
- AP Discovery - NAT IP Only ................. Enabled
- IP/MAC Addr Binding Check .................. Enabled
- Press Enter to continue or <ctrl-z> to abort
- Port Summary
- STP Admin Physical Physical Link Link
- Pr Type Stat Mode Mode Status Status Trap POE
- -- ------- ---- ------- ---------- ---------- ------ ------- -------
- 1 Normal Forw Enable Auto 1000 Full Up Enable N/A
- 2 Normal Disa Enable Auto Auto Down Enable N/A
- 3 Normal Forw Enable Auto 1000 Full Up Enable Enable (Power On )
- 4 Normal Forw Enable Auto 1000 Full Up Enable Enable (Power On )
- Press Enter to continue or <ctrl-z> to abort
- AP Summary
- Number of APs.................................... 2
- Global AP User Name.............................. Not Configured
- Global AP Dot1x User Name........................ Not Configured
- AP Name Slots AP Model Ethernet MAC Location Port Country Priority
- ------------------ ----- -------------------- ----------------- ---------------- ---- ------- ------
- AP30f7.0d13.2e3e 2 AIR-LAP1142N-E-K9 30:f7:0d:13:2e:3e default location 4 BY 1
- AP30f7.0d13.07ed 2 AIR-LAP1142N-E-K9 30:f7:0d:13:07:ed default location 3 BY 1
- AP Tcp-Mss-Adjust Info
- AP Name TCP State MSS Size
- ------------------ -------- -------
- AP30f7.0d13.2e3e disabled -
- AP30f7.0d13.07ed disabled -
- Press Enter to continue or <ctrl-z> to abort
- AP Location
- Total Number of AP Groups........................ 0
- Site Name........................................ default-group
- Site Description................................. <none>
- WLAN ID Interface Network Admission Control Radio Policy
- ------- ----------- -------------------------- ------------
- 1 management Disabled None
- AP Name Slots AP Model Ethernet MAC Location Port Country Priority
- ------------------ ----- ------------------- ----------------- ---------------- ---- ------- --------
- AP30f7.0d13.2e3e 2 AIR-LAP1142N-E-K9 30:f7:0d:13:2e:3e default location 4 BY 1
- AP30f7.0d13.07ed 2 AIR-LAP1142N-E-K9 30:f7:0d:13:07:ed default location 3 BY 1
- Press Enter to continue or <ctrl-z> to abort
- AP Config
- Cisco AP Identifier.............................. 1
- Cisco AP Name.................................... AP30f7.0d13.2e3e
- Country code..................................... BY - Belarus
- Regulatory Domain allowed by Country............. 802.11bg:-E 802.11a:-I
- AP Country code.................................. BY - Belarus
- AP Regulatory Domain............................. -E
- Switch Port Number .............................. 4
- MAC Address...................................... 30:f7:0d:13:2e:3e
- IP Address Configuration......................... Static IP assigned
- IP Address....................................... 192.168.1.21
- IP NetMask....................................... 255.255.255.0
- Gateway IP Addr.................................. 192.168.1.1
- Domain...........................................
- Name Server......................................
- NAT External IP Address.......................... None
- CAPWAP Path MTU.................................. 1485
- Telnet State..................................... Disabled
- Ssh State........................................ Disabled
- Cisco AP Location................................ default location
- Cisco AP Group Name.............................. default-group
- Primary Cisco Switch Name........................ Cisco_ZG
- --More or (q)uit current module or <ctrl-z> to abort
- Primary Cisco Switch IP Address.................. 192.168.1.20
- Secondary Cisco Switch Name......................
- Secondary Cisco Switch IP Address................ Not Configured
- Tertiary Cisco Switch Name.......................
- Tertiary Cisco Switch IP Address................. Not Configured
- Administrative State ............................ ADMIN_ENABLED
- Operation State ................................. REGISTERED
- Mirroring Mode .................................. Disabled
- AP Mode ......................................... Local
- Public Safety ................................... Disabled
- AP SubMode ...................................... Not Configured
- Remote AP Debug ................................. Disabled
- Logging trap severity level ..................... informational
- Logging syslog facility ......................... kern
- S/W Version .................................... 7.0.230.0
- Boot Version ................................... 12.4.23.3
- Mini IOS Version ................................ 3.0.51.0
- Stats Reporting Period .......................... 180
- LED State........................................ Enabled
- PoE Pre-Standard Switch.......................... Disabled
- PoE Power Injector MAC Addr...................... Disabled
- Power Type/Mode.................................. Power injector / Normal mode
- Number Of Slots.................................. 2
- --More or (q)uit current module or <ctrl-z> to abort
- AP Model......................................... AIR-LAP1142N-E-K9
- AP Image......................................... C1140-K9W8-M
- IOS Version...................................... 12.4(23c)JA4
- Reset Button..................................... Enabled
- AP Serial Number................................. FCZ1631Z2VX
- AP Certificate Type.............................. Manufacture Installed
- AP User Mode..................................... AUTOMATIC
- AP User Name..................................... Not Configured
- AP Dot1x User Mode............................... Not Configured
- AP Dot1x User Name............................... Not Configured
- Cisco AP system logging host..................... 255.255.255.255
- AP Up Time....................................... 7 days, 01 h 14 m 55 s
- AP LWAPP Up Time................................. 7 days, 01 h 13 m 57 s
- Join Date and Time............................... Tue Mar 19 09:00:17 2013
- Join Taken Time.................................. 0 days, 00 h 00 m 57 s
- Attributes for Slot 0
- Radio Type................................... RADIO_TYPE_80211n-2.4
- Administrative State ........................ ADMIN_ENABLED
- Operation State ............................. UP
- Radio Role .................................. ACCESS
- CellId ...................................... 0
- --More or (q)uit current module or <ctrl-z> to abort
- Station Configuration
- Configuration ............................. AUTOMATIC
- Number Of WLANs ........................... 1
- Medium Occupancy Limit .................... 100
- CFP Period ................................ 4
- CFP MaxDuration ........................... 60
- BSSID ..................................... 34:bd:c8:48:17:20
- Operation Rate Set
- 1000 Kilo Bits........................... MANDATORY
- 2000 Kilo Bits........................... MANDATORY
- 5500 Kilo Bits........................... MANDATORY
- 11000 Kilo Bits.......................... MANDATORY
- 6000 Kilo Bits........................... SUPPORTED
- 9000 Kilo Bits........................... SUPPORTED
- 12000 Kilo Bits.......................... SUPPORTED
- 18000 Kilo Bits.......................... SUPPORTED
- 24000 Kilo Bits.......................... SUPPORTED
- 36000 Kilo Bits.......................... SUPPORTED
- 48000 Kilo Bits.......................... SUPPORTED
- 54000 Kilo Bits.......................... SUPPORTED
- MCS Set
- MCS 0.................................... SUPPORTED
- --More or (q)uit current module or <ctrl-z> to abort
- MCS 1.................................... SUPPORTED
- MCS 2.................................... SUPPORTED
- MCS 3.................................... SUPPORTED
- MCS 4.................................... SUPPORTED
- MCS 5.................................... SUPPORTED
- MCS 6.................................... SUPPORTED
- MCS 7.................................... SUPPORTED
- MCS 8.................................... SUPPORTED
- MCS 9.................................... SUPPORTED
- MCS 10................................... SUPPORTED
- MCS 11................................... SUPPORTED
- MCS 12................................... SUPPORTED
- MCS 13................................... SUPPORTED
- MCS 14................................... SUPPORTED
- MCS 15................................... SUPPORTED
- Beacon Period ............................. 100
- Fragmentation Threshold ................... 2346
- Multi Domain Capability Implemented ....... TRUE
- Multi Domain Capability Enabled ........... TRUE
- Country String ............................ BY
- Multi Domain Capability
- Configuration ............................. AUTOMATIC
- -More or (q)uit current module or <ctrl-z> to abort
- First Chan Num ............................ 1
- Number Of Channels ........................ 13
- MAC Operation Parameters
- Configuration ............................. AUTOMATIC
- Fragmentation Threshold ................... 2346
- Packet Retry Limit ........................ 64
- Tx Power
- Num Of Supported Power Levels ............. 7
- Tx Power Level 1 .......................... 17 dBm
- Tx Power Level 2 .......................... 14 dBm
- Tx Power Level 3 .......................... 11 dBm
- Tx Power Level 4 .......................... 8 dBm
- Tx Power Level 5 .......................... 5 dBm
- Tx Power Level 6 .......................... 2 dBm
- Tx Power Level 7 .......................... -1 dBm
- Tx Power Configuration .................... AUTOMATIC
- Current Tx Power Level .................... 1
- Phy OFDM parameters
- Configuration ............................. AUTOMATIC
- Current Channel ........................... 1
- --More or (q)uit current module or <ctrl-z> to abort
- Extension Channel ......................... NONE
- Channel Width.............................. 20 Mhz
- Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11,12,
- ......................................... 13
- TI Threshold .............................. -50
- Legacy Tx Beamforming Configuration ....... AUTOMATIC
- Legacy Tx Beamforming ..................... DISABLED
- Antenna Type............................... INTERNAL_ANTENNA
- Internal Antenna Gain (in .5 dBi units).... 8
- Diversity.................................. DIVERSITY_ENABLED
- 802.11n Antennas
- A....................................... ENABLED
- B....................................... ENABLED
- C....................................... ENABLED
- Performance Profile Parameters
- Configuration ............................. AUTOMATIC
- Interference threshold..................... 10 %
- Noise threshold............................ -70 dBm
- RF utilization threshold................... 80 %
- Data-rate threshold........................ 1000000 bps
- Client threshold........................... 12 clients
- Coverage SNR threshold..................... 12 dB
- ore or (q)uit current module or <ctrl-z> to abort
- Coverage exception level................... 25 %
- Client minimum exception level............. 3 clients
- Rogue Containment Information
- Containment Count............................ 0
- CleanAir Management Information
- CleanAir Capable......................... No
- Cisco AP Identifier.............................. 1
- Cisco AP Name.................................... AP30f7.0d13.2e3e
- Country code..................................... BY - Belarus
- Regulatory Domain allowed by Country............. 802.11bg:-E 802.11a:-I
- AP Country code.................................. BY - Belarus
- AP Regulatory Domain............................. -E
- Switch Port Number .............................. 4
- MAC Address...................................... 30:f7:0d:13:2e:3e
- IP Address Configuration......................... Static IP assigned
- IP Address....................................... 192.168.1.21
- IP NetMask....................................... 255.255.255.0
- Gateway IP Addr.................................. 192.168.1.1
- Domain...........................................
- Name Server......................................
- NAT External IP Address.......................... None
- --More or (q)uit current module or <ctrl-z> to abort
- CAPWAP Path MTU.................................. 1485
- Telnet State..................................... Disabled
- Ssh State........................................ Disabled
- Cisco AP Location................................ default location
- Cisco AP Group Name.............................. default-group
- Primary Cisco Switch Name........................ Cisco_ZG
- Primary Cisco Switch IP Address.................. 192.168.1.20
- Secondary Cisco Switch Name......................
- Secondary Cisco Switch IP Address................ Not Configured
- Tertiary Cisco Switch Name.......................
- Tertiary Cisco Switch IP Address................. Not Configured
- Administrative State ............................ ADMIN_ENABLED
- Operation State ................................. REGISTERED
- Mirroring Mode .................................. Disabled
- AP Mode ......................................... Local
- Public Safety ................................... Disabled
- AP SubMode ...................................... Not Configured
- Remote AP Debug ................................. Disabled
- Logging trap severity level ..................... informational
- Logging syslog facility ......................... kern
- S/W Version .................................... 7.0.230.0
- Boot Version ................................... 12.4.23.3
- Mini IOS Version ................................ 3.0.51.0
- -More or (q)uit current module or <ctrl-z> to abort
- Stats Reporting Period .......................... 180
- LED State........................................ Enabled
- PoE Pre-Standard Switch.......................... Disabled
- PoE Power Injector MAC Addr...................... Disabled
- Power Type/Mode.................................. Power injector / Normal mode
- Number Of Slots.................................. 2
- AP Model......................................... AIR-LAP1142N-E-K9
- AP Image......................................... C1140-K9W8-M
- IOS Version...................................... 12.4(23c)JA4
- Reset Button..................................... Enabled
- AP Serial Number................................. FCZ1631Z2VX
- AP Certificate Type.............................. Manufacture Installed
- AP User Mode..................................... AUTOMATIC
- AP User Name..................................... Not Configured
- AP Dot1x User Mode............................... Not Configured
- AP Dot1x User Name............................... Not Configured
- Cisco AP system logging host..................... 255.255.255.255
- AP Up Time....................................... 7 days, 01 h 14 m 55 s
- AP LWAPP Up Time................................. 7 days, 01 h 13 m 57 s
- Join Date and Time............................... Tue Mar 19 09:00:17 2013
- Join Taken Time.................................. 0 days, 00 h 00 m 57 s
- --More or (q)uit current module or <ctrl-z> to abort
- Attributes for Slot 1
- Cisco AP Identifier.............................. 2
- Cisco AP Name.................................... AP30f7.0d13.07ed
- Country code..................................... BY - Belarus
- Regulatory Domain allowed by Country............. 802.11bg:-E 802.11a:-I
- AP Country code.................................. BY - Belarus
- AP Regulatory Domain............................. -E
- Switch Port Number .............................. 3
- MAC Address...................................... 30:f7:0d:13:07:ed
- IP Address Configuration......................... Static IP assigned
- IP Address....................................... 192.168.1.22
- IP NetMask....................................... 255.255.255.0
- Gateway IP Addr.................................. 192.168.1.1
- Domain...........................................
- Name Server......................................
- NAT External IP Address.......................... None
- CAPWAP Path MTU.................................. 1485
- Telnet State..................................... Disabled
- Ssh State........................................ Disabled
- Cisco AP Location................................ default location
- Cisco AP Group Name.............................. default-group
- Primary Cisco Switch Name........................ Cisco_ZG
- Primary Cisco Switch IP Address.................. 192.168.1.20
- --More or (q)uit current module or <ctrl-z> to abort
- Secondary Cisco Switch Name......................
- Secondary Cisco Switch IP Address................ Not Configured
- Tertiary Cisco Switch Name.......................
- Tertiary Cisco Switch IP Address................. Not Configured
- Administrative State ............................ ADMIN_ENABLED
- Operation State ................................. REGISTERED
- Mirroring Mode .................................. Disabled
- AP Mode ......................................... Local
- Public Safety ................................... Disabled
- AP SubMode ...................................... Not Configured
- Remote AP Debug ................................. Disabled
- Logging trap severity level ..................... informational
- Logging syslog facility ......................... kern
- S/W Version .................................... 7.0.230.0
- Boot Version ................................... 12.4.23.3
- Mini IOS Version ................................ 3.0.51.0
- Stats Reporting Period .......................... 180
- LED State........................................ Enabled
- PoE Pre-Standard Switch.......................... Disabled
- PoE Power Injector MAC Addr...................... Disabled
- Power Type/Mode.................................. Power injector / Normal mode
- Number Of Slots.................................. 2
- AP Model......................................... AIR-LAP1142N-E-K9
- -More or (q)uit current module or <ctrl-z> to abort
- AP Image......................................... C1140-K9W8-M
- IOS Version...................................... 12.4(23c)JA4
- Reset Button..................................... Enabled
- AP Serial Number................................. FCZ1631W2UR
- AP Certificate Type.............................. Manufacture Installed
- AP User Mode..................................... AUTOMATIC
- AP User Name..................................... Not Configured
- AP Dot1x User Mode............................... Not Configured
- AP Dot1x User Name............................... Not Configured
- Cisco AP system logging host..................... 255.255.255.255
- AP Up Time....................................... 0 days, 15 h 29 m 14 s
- AP LWAPP Up Time................................. 0 days, 15 h 28 m 17 s
- Join Date and Time............................... Mon Mar 25 18:47:18 2013
- Join Taken Time.................................. 0 days, 00 h 00 m 56 s
- Attributes for Slot 0
- Radio Type................................... RADIO_TYPE_80211n-2.4
- Administrative State ........................ ADMIN_ENABLED
- Operation State ............................. UP
- Radio Role .................................. ACCESS
- CellId ...................................... 0
- --More or (q)uit current module or <ctrl-z> to abort
- Station Configuration
- Configuration ............................. AUTOMATIC
- Number Of WLANs ........................... 1
- Medium Occupancy Limit .................... 100
- CFP Period ................................ 4
- CFP MaxDuration ........................... 60
- BSSID ..................................... 34:bd:c8:48:12:d0
- Operation Rate Set
- 1000 Kilo Bits........................... MANDATORY
- 2000 Kilo Bits........................... MANDATORY
- 5500 Kilo Bits........................... MANDATORY
- 11000 Kilo Bits.......................... MANDATORY
- 6000 Kilo Bits........................... SUPPORTED
- 9000 Kilo Bits........................... SUPPORTED
- 12000 Kilo Bits.......................... SUPPORTED
- 18000 Kilo Bits.......................... SUPPORTED
- 24000 Kilo Bits.......................... SUPPORTED
- 36000 Kilo Bits.......................... SUPPORTED
- 48000 Kilo Bits.......................... SUPPORTED
- 54000 Kilo Bits.......................... SUPPORTED
- MCS Set
- MCS 0.................................... SUPPORTED
- MCS 1.................................... SUPPORTED
- --More or (q)uit current module or <ctrl-z> to abort
- MCS 2.................................... SUPPORTED
- MCS 3.................................... SUPPORTED
- MCS 4.................................... SUPPORTED
- MCS 5.................................... SUPPORTED
- MCS 6.................................... SUPPORTED
- MCS 7.................................... SUPPORTED
- MCS 8.................................... SUPPORTED
- MCS 9.................................... SUPPORTED
- MCS 10................................... SUPPORTED
- MCS 11................................... SUPPORTED
- MCS 12................................... SUPPORTED
- MCS 13................................... SUPPORTED
- MCS 14................................... SUPPORTED
- MCS 15................................... SUPPORTED
- Beacon Period ............................. 100
- Fragmentation Threshold ................... 2346
- Multi Domain Capability Implemented ....... TRUE
- Multi Domain Capability Enabled ........... TRUE
- Country String ............................ BY
- Multi Domain Capability
- Configuration ............................. AUTOMATIC
- First Chan Num ............................ 1
- --More or (q)uit current module or <ctrl-z> to abort
- Number Of Channels ........................ 13
- MAC Operation Parameters
- Configuration ............................. AUTOMATIC
- Fragmentation Threshold ................... 2346
- Packet Retry Limit ........................ 64
- Tx Power
- Num Of Supported Power Levels ............. 7
- Tx Power Level 1 .......................... 17 dBm
- Tx Power Level 2 .......................... 14 dBm
- Tx Power Level 3 .......................... 11 dBm
- Tx Power Level 4 .......................... 8 dBm
- Tx Power Level 5 .......................... 5 dBm
- Tx Power Level 6 .......................... 2 dBm
- Tx Power Level 7 .......................... -1 dBm
- Tx Power Configuration .................... AUTOMATIC
- Current Tx Power Level .................... 1
- Phy OFDM parameters
- Configuration ............................. AUTOMATIC
- Current Channel ........................... 9
- Extension Channel ......................... NONE
- More or (q)uit current module or <ctrl-z> to abort
- Channel Width.............................. 20 Mhz
- Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11,12,
- ......................................... 13
- TI Threshold .............................. -50
- Legacy Tx Beamforming Configuration ....... AUTOMATIC
- Legacy Tx Beamforming ..................... DISABLED
- Antenna Type............................... INTERNAL_ANTENNA
- Internal Antenna Gain (in .5 dBi units).... 8
- Diversity.................................. DIVERSITY_ENABLED
- 802.11n Antennas
- A....................................... ENABLED
- B....................................... ENABLED
- C....................................... ENABLED
- Performance Profile Parameters
- Configuration ............................. AUTOMATIC
- Interference threshold..................... 10 %
- Noise threshold............................ -70 dBm
- RF utilization threshold................... 80 %
- Data-rate threshold........................ 1000000 bps
- Client threshold........................... 12 clients
- Coverage SNR threshold..................... 12 dB
- Coverage exception level................... 25 %
- --More or (q)uit current module or <ctrl-z> to abort
- Client minimum exception level............. 3 clients
- Rogue Containment Information
- Containment Count............................ 0
- CleanAir Management Information
- CleanAir Capable......................... No
- Cisco AP Identifier.............................. 2
- Cisco AP Name.................................... AP30f7.0d13.07ed
- Country code..................................... BY - Belarus
- Regulatory Domain allowed by Country............. 802.11bg:-E 802.11a:-I
- AP Country code.................................. BY - Belarus
- AP Regulatory Domain............................. -E
- Switch Port Number .............................. 3
- MAC Address...................................... 30:f7:0d:13:07:ed
- IP Address Configuration......................... Static IP assigned
- IP Address....................................... 192.168.1.22
- IP NetMask....................................... 255.255.255.0
- Gateway IP Addr.................................. 192.168.1.1
- Domain...........................................
- Name Server......................................
- NAT External IP Address.......................... None
- CAPWAP Path MTU.................................. 1485
- --More or (q)uit current module or <ctrl-z> to abort
- Telnet State..................................... Disabled
- Ssh State........................................ Disabled
- Cisco AP Location................................ default location
- Cisco AP Group Name.............................. default-group
- Primary Cisco Switch Name........................ Cisco_ZG
- Primary Cisco Switch IP Address.................. 192.168.1.20
- Secondary Cisco Switch Name......................
- Secondary Cisco Switch IP Address................ Not Configured
- Tertiary Cisco Switch Name.......................
- Tertiary Cisco Switch IP Address................. Not Configured
- Administrative State ............................ ADMIN_ENABLED
- Operation State ................................. REGISTERED
- Mirroring Mode .................................. Disabled
- AP Mode ......................................... Local
- Public Safety ................................... Disabled
- AP SubMode ...................................... Not Configured
- Remote AP Debug ................................. Disabled
- Logging trap severity level ..................... informational
- Logging syslog facility ......................... kern
- S/W Version .................................... 7.0.230.0
- Boot Version ................................... 12.4.23.3
- Mini IOS Version ................................ 3.0.51.0
- Stats Reporting Period .......................... 180
- --More or (q)uit current module or <ctrl-z> to abort
- LED State........................................ Enabled
- PoE Pre-Standard Switch.......................... Disabled
- PoE Power Injector MAC Addr...................... Disabled
- Power Type/Mode.................................. Power injector / Normal mode
- Number Of Slots.................................. 2
- AP Model......................................... AIR-LAP1142N-E-K9
- AP Image......................................... C1140-K9W8-M
- IOS Version...................................... 12.4(23c)JA4
- Reset Button..................................... Enabled
- AP Serial Number................................. FCZ1631W2UR
- AP Certificate Type.............................. Manufacture Installed
- AP User Mode..................................... AUTOMATIC
- AP User Name..................................... Not Configured
- AP Dot1x User Mode............................... Not Configured
- AP Dot1x User Name............................... Not Configured
- Cisco AP system logging host..................... 255.255.255.255
- AP Up Time....................................... 0 days, 15 h 29 m 14 s
- AP LWAPP Up Time................................. 0 days, 15 h 28 m 17 s
- Join Date and Time............................... Mon Mar 25 18:47:18 2013
- Join Taken Time.................................. 0 days, 00 h 00 m 56 s
- Attributes for Slot 1
- AP Airewave Director Configuration
- Number Of Slots.................................. 2
- AP Name.......................................... AP30f7.0d13.2e3e
- MAC Address...................................... 30:f7:0d:13:2e:3e
- Slot ID........................................ 0
- Radio Type..................................... RADIO_TYPE_80211b/g
- Sub-band Type.................................. All
- Noise Information
- Noise Profile................................ PASSED
- Channel 1.................................... -88 dBm
- Channel 2.................................... -87 dBm
- Channel 3.................................... -87 dBm
- Channel 4.................................... -91 dBm
- Channel 5.................................... -90 dBm
- Channel 6.................................... -94 dBm
- Channel 7.................................... -91 dBm
- Channel 8.................................... -92 dBm
- Channel 9.................................... -95 dBm
- Channel 10................................... -94 dBm
- Channel 11................................... -94 dBm
- Channel 12................................... -94 dBm
- Channel 13................................... -92 dBm
- Interference Information
- --More or (q)uit current module or <ctrl-z> to abort
- Interference Profile......................... PASSED
- Channel 1.................................... -74 dBm @ 3 % busy
- Channel 2.................................... -128 dBm @ 0 % busy
- Channel 3.................................... -128 dBm @ 0 % busy
- Channel 4.................................... -128 dBm @ 0 % busy
- Channel 5.................................... -128 dBm @ 0 % busy
- Channel 6.................................... -128 dBm @ 0 % busy
- Channel 7.................................... -128 dBm @ 0 % busy
- Channel 8.................................... -128 dBm @ 0 % busy
- Channel 9.................................... -65 dBm @ 2 % busy
- Channel 10................................... -128 dBm @ 0 % busy
- Channel 11................................... -128 dBm @ 0 % busy
- Channel 12................................... -128 dBm @ 0 % busy
- Channel 13................................... -128 dBm @ 0 % busy
- Load Information
- Load Profile................................. PASSED
- Receive Utilization.......................... 0 %
- Transmit Utilization......................... 3 %
- Channel Utilization.......................... 10 %
- Attached Clients............................. 9 clients
- Coverage Information
- Coverage Profile............................. PASSED
- Failed Clients............................... 0 clients
- --More or (q)uit current module or <ctrl-z> to abort
- Client Signal Strengths
- RSSI -100 dbm................................ 0 clients
- RSSI -92 dbm................................ 0 clients
- RSSI -84 dbm................................ 0 clients
- RSSI -76 dbm................................ 0 clients
- RSSI -68 dbm................................ 0 clients
- RSSI -60 dbm................................ 5 clients
- RSSI -52 dbm................................ 5 clients
- Client Signal To Noise Ratios
- SNR 0 dB.................................. 0 clients
- SNR 5 dB.................................. 0 clients
- SNR 10 dB.................................. 0 clients
- SNR 15 dB.................................. 0 clients
- SNR 20 dB.................................. 0 clients
- SNR 25 dB.................................. 2 clients
- SNR 30 dB.................................. 2 clients
- SNR 35 dB.................................. 2 clients
- SNR 40 dB.................................. 4 clients
- SNR 45 dB.................................. 0 clients
- Nearby APs
- AP 34:bd:c8:48:12:d0 slot 0.................. -46 dBm on 9 (192.168.1.20)
- Radar Information
- Channel Assignment Information
- --More or (q)uit current module or <ctrl-z> to abort
- Current Channel Average Energy............... -78 dBm
- Previous Channel Average Energy.............. -58 dBm
- Channel Change Count......................... 6
- Last Channel Change Time..................... Tue Mar 26 09:56:44 2013
- Recommended Best Channel..................... 1
- RF Parameter Recommendations
- Power Level.................................. 1
- RTS/CTS Threshold............................ 2347
- Fragmentation Threshold...................... 2346
- Antenna Pattern.............................. 0
- Persistent Interference Devices
- Class Type Channel DC (%%) RSSI (dBm) Last Update Time
- ------------------------- ------- ------ ---------- ------------------------
- All third party trademarks are the property of their respective owners.
- Number Of Slots.................................. 2
- AP Name.......................................... AP30f7.0d13.2e3e
- MAC Address...................................... 30:f7:0d:13:2e:3e
- Slot ID........................................ 1
- Radio Type..................................... RADIO_TYPE_80211a
- Sub-band Type.................................. All
- Noise Information
- Noise Profile................................ PASSED
- --More or (q)uit current module or <ctrl-z> to abort
- Interference Information
- Interference Profile......................... PASSED
- Rogue Histogram (20/40_ABOVE/40_BELOW)
- .............................................
- Load Information
- Load Profile................................. PASSED
- Receive Utilization.......................... 0 %
- Transmit Utilization......................... 0 %
- Channel Utilization.......................... 0 %
- Attached Clients............................. 0 clients
- Coverage Information
- Coverage Profile............................. PASSED
- Failed Clients............................... 0 clients
- Client Signal Strengths
- RSSI -100 dbm................................ 0 clients
- RSSI -92 dbm................................ 0 clients
- RSSI -84 dbm................................ 0 clients
- RSSI -76 dbm................................ 0 clients
- RSSI -68 dbm................................ 0 clients
- RSSI -60 dbm................................ 0 clients
- RSSI -52 dbm................................ 0 clients
- Client Signal To Noise Ratios
- SNR 0 dB.................................. 0 clients
- --More or (q)uit current module or <ctrl-z> to abort
- SNR 5 dB.................................. 0 clients
- SNR 10 dB.................................. 0 clients
- SNR 15 dB.................................. 0 clients
- SNR 20 dB.................................. 0 clients
- SNR 25 dB.................................. 0 clients
- SNR 30 dB.................................. 0 clients
- SNR 35 dB.................................. 0 clients
- SNR 40 dB.................................. 0 clients
- SNR 45 dB.................................. 0 clients
- Nearby APs
- Radar Information
- RF Parameter Recommendations
- Power Level.................................. 0
- RTS/CTS Threshold............................ 0
- Fragmentation Threshold...................... 0
- Antenna Pattern.............................. 0
- Persistent Interference Devices
- Class Type Channel DC (%%) RSSI (dBm) Last Update Time
- ------------------------- ------- ------ ---------- ------------------------
- All third party trademarks are the property of their respective owners.
- Press Enter to continue or <ctrl-z> to abort
- Number Of Slots.................................. 2
- AP Name.......................................... AP30f7.0d13.07ed
- MAC Address...................................... 30:f7:0d:13:07:ed
- Slot ID........................................ 0
- Radio Type..................................... RADIO_TYPE_80211b/g
- Sub-band Type.................................. All
- Noise Information
- Noise Profile................................ PASSED
- Channel 1.................................... -92 dBm
- Channel 2.................................... -95 dBm
- Channel 3.................................... -91 dBm
- Channel 4.................................... -92 dBm
- Channel 5.................................... -95 dBm
- Channel 6.................................... -94 dBm
- Channel 7.................................... -93 dBm
- Channel 8.................................... -92 dBm
- Channel 9.................................... -95 dBm
- Channel 10................................... -96 dBm
- Channel 11................................... -94 dBm
- Channel 12................................... -95 dBm
- Channel 13................................... -95 dBm
- Interference Information
- Interference Profile......................... PASSED
- --More or (q)uit current module or <ctrl-z> to abort
- Channel 1.................................... -128 dBm @ 0 % busy
- Channel 2.................................... -128 dBm @ 0 % busy
- Channel 3.................................... -128 dBm @ 0 % busy
- Channel 4.................................... -128 dBm @ 0 % busy
- Channel 5.................................... -128 dBm @ 0 % busy
- Channel 6.................................... -128 dBm @ 0 % busy
- Channel 7.................................... -128 dBm @ 0 % busy
- Channel 8.................................... -128 dBm @ 0 % busy
- Channel 9.................................... -128 dBm @ 0 % busy
- Channel 10................................... -128 dBm @ 0 % busy
- Channel 11................................... -128 dBm @ 0 % busy
- Channel 12................................... -64 dBm @ 1 % busy
- Channel 13................................... -128 dBm @ 0 % busy
- Load Information
- Load Profile................................. FAILED
- Receive Utilization.......................... 1 %
- Transmit Utilization......................... 5 %
- Channel Utilization.......................... 9 %
- Attached Clients............................. 17 clients
- Coverage Information
- Coverage Profile............................. PASSED
- Failed Clients............................... 0 clients
- Client Signal Strengths
- ore or (q)uit current module or <ctrl-z> to abort
- RSSI -100 dbm................................ 0 clients
- RSSI -92 dbm................................ 0 clients
- RSSI -84 dbm................................ 0 clients
- RSSI -76 dbm................................ 0 clients
- RSSI -68 dbm................................ 6 clients
- RSSI -60 dbm................................ 5 clients
- RSSI -52 dbm................................ 7 clients
- Client Signal To Noise Ratios
- SNR 0 dB.................................. 0 clients
- SNR 5 dB.................................. 0 clients
- SNR 10 dB.................................. 0 clients
- SNR 15 dB.................................. 0 clients
- SNR 20 dB.................................. 0 clients
- SNR 25 dB.................................. 2 clients
- SNR 30 dB.................................. 5 clients
- SNR 35 dB.................................. 2 clients
- SNR 40 dB.................................. 5 clients
- SNR 45 dB.................................. 4 clients
- Nearby APs
- AP 34:bd:c8:48:17:20 slot 0.................. -50 dBm on 1 (192.168.1.20)
- Radar Information
- Channel Assignment Information
- Current Channel Average Energy............... unknown
- --More or (q)uit current module or <ctrl-z> to abort
- Previous Channel Average Energy.............. unknown
- Channel Change Count......................... 0
- Last Channel Change Time..................... Mon Mar 25 18:47:18 2013
- Recommended Best Channel..................... 9
- RF Parameter Recommendations
- Power Level.................................. 1
- RTS/CTS Threshold............................ 2347
- Fragmentation Threshold...................... 2346
- Antenna Pattern.............................. 0
- Persistent Interference Devices
- Class Type Channel DC (%%) RSSI (dBm) Last Update Time
- ------------------------- ------- ------ ---------- ------------------------
- All third party trademarks are the property of their respective owners.
- Number Of Slots.................................. 2
- AP Name.......................................... AP30f7.0d13.07ed
- MAC Address...................................... 30:f7:0d:13:07:ed
- Slot ID........................................ 1
- Radio Type..................................... RADIO_TYPE_80211a
- Sub-band Type.................................. All
- Noise Information
- Noise Profile................................ PASSED
- Interference Information
- More or (q)uit current module or <ctrl-z> to abort
- Interference Profile......................... PASSED
- Rogue Histogram (20/40_ABOVE/40_BELOW)
- .............................................
- Load Information
- Load Profile................................. PASSED
- Receive Utilization.......................... 0 %
- Transmit Utilization......................... 0 %
- Channel Utilization.......................... 0 %
- Attached Clients............................. 0 clients
- Coverage Information
- Coverage Profile............................. PASSED
- Failed Clients............................... 0 clients
- Client Signal Strengths
- RSSI -100 dbm................................ 0 clients
- RSSI -92 dbm................................ 0 clients
- RSSI -84 dbm................................ 0 clients
- RSSI -76 dbm................................ 0 clients
- RSSI -68 dbm................................ 0 clients
- RSSI -60 dbm................................ 0 clients
- RSSI -52 dbm................................ 0 clients
- Client Signal To Noise Ratios
- SNR 0 dB.................................. 0 clients
- SNR 5 dB.................................. 0 clients
- --More or (q)uit current module or <ctrl-z> to abort
- SNR 10 dB.................................. 0 clients
- SNR 15 dB.................................. 0 clients
- SNR 20 dB.................................. 0 clients
- SNR 25 dB.................................. 0 clients
- SNR 30 dB.................................. 0 clients
- SNR 35 dB.................................. 0 clients
- SNR 40 dB.................................. 0 clients
- SNR 45 dB.................................. 0 clients
- Nearby APs
- Radar Information
- RF Parameter Recommendations
- Power Level.................................. 0
- RTS/CTS Threshold............................ 0
- Fragmentation Threshold...................... 0
- Antenna Pattern.............................. 0
- Persistent Interference Devices
- Class Type Channel DC (%%) RSSI (dBm) Last Update Time
- ------------------------- ------- ------ ---------- ------------------------
- All third party trademarks are the property of their respective owners.
- 802.11a Configuration
- 802.11a Network.................................. Disabled
- 11nSupport....................................... Enabled
- 802.11a Low Band........................... Enabled
- 802.11a Mid Band........................... Enabled
- 802.11a High Band.......................... Disabled
- 802.11a Operational Rates
- 802.11a 6M Rate.............................. Mandatory
- 802.11a 9M Rate.............................. Supported
- 802.11a 12M Rate............................. Mandatory
- 802.11a 18M Rate............................. Supported
- 802.11a 24M Rate............................. Mandatory
- 802.11a 36M Rate............................. Supported
- 802.11a 48M Rate............................. Supported
- 802.11a 54M Rate............................. Supported
- 802.11n MCS Settings:
- MCS 0........................................ Supported
- MCS 1........................................ Supported
- MCS 2........................................ Supported
- MCS 3........................................ Supported
- MCS 4........................................ Supported
- MCS 5........................................ Supported
- MCS 6........................................ Supported
- --More or (q)uit current module or <ctrl-z> to abort
- MCS 7........................................ Supported
- MCS 8........................................ Supported
- MCS 9........................................ Supported
- MCS 10....................................... Supported
- MCS 11....................................... Supported
- MCS 12....................................... Supported
- MCS 13....................................... Supported
- MCS 14....................................... Supported
- MCS 15....................................... Supported
- 802.11n Status:
- A-MPDU Tx:
- Priority 0............................... Enabled
- Priority 1............................... Disabled
- Priority 2............................... Disabled
- Priority 3............................... Disabled
- Priority 4............................... Enabled
- Priority 5............................... Enabled
- Priority 6............................... Disabled
- Priority 7............................... Disabled
- A-MSDU Tx:
- Priority 0............................... Enabled
- Priority 1............................... Enabled
- Priority 2............................... Enabled
- --More or (q)uit current module or <ctrl-z> to abort
- Priority 3............................... Enabled
- Priority 4............................... Enabled
- Priority 5............................... Enabled
- Priority 6............................... Disabled
- Priority 7............................... Disabled
- Rifs Rx ..................................... Enabled
- Guard Interval .............................. Any
- Beacon Interval.................................. 100
- CF Pollable mandatory............................ Disabled
- CF Poll Request mandatory........................ Disabled
- CFP Period....................................... 4
- CFP Maximum Duration............................. 60
- Default Channel.................................. 36
- Default Tx Power Level........................... 0
- DTPC Status..................................... Enabled
- Fragmentation Threshold.......................... 2346
- TI Threshold..................................... -50
- Legacy Tx Beamforming setting.................... Disabled
- Traffic Stream Metrics Status.................... Disabled
- Expedited BW Request Status...................... Disabled
- World Mode....................................... Enabled
- EDCA profile type................................ default-wmm
- Voice MAC optimization status.................... Disabled
- --More or (q)uit current module or <ctrl-z> to abort
- Call Admission Control (CAC) configuration
- Voice AC:
- Voice AC - Admission control (ACM)............ Disabled
- Voice Stream-Size............................. 84000
- Voice Max-Streams............................. 2
- Voice max RF bandwidth........................ 75
- Voice reserved roaming bandwidth.............. 6
- Voice CAC Method ............................. Load-Based
- Voice tspec inactivity timeout................ Disabled
- CAC SIP-Voice configuration
- SIP based CAC ................................ Disabled
- SIP Codec Type ............................... CODEC_TYPE_G711
- SIP call bandwidth ........................... 64
- SIP call bandwith sample-size ................ 20
- Video AC:
- Video AC - Admission control (ACM)............ Disabled
- Video max RF bandwidth........................ Infinite
- Video reserved roaming bandwidth.............. 0
- Best-effort AC - Admission control (ACM)...... Disabled
- Background AC - Admission control (ACM)....... Disabled
- Press Enter to continue or <ctrl-z> to abort
- 802.11a Advanced Configuration
- AP Name MAC Address Admin State Operation State Channel TxPower
- -------------------------------- ------------------ ------------ --------------- ---------- --------
- AP30f7.0d13.2e3e 34:bd:c8:48:17:20 ENABLED DOWN 52* 1(*)
- AP30f7.0d13.07ed 34:bd:c8:48:12:d0 ENABLED DOWN 40* 1(*)
- Press Enter to continue or <ctrl-z> to abort
- 802.11a Airewave Director Configuration
- RF Event and Performance Logging
- Channel Update Logging......................... Off
- Coverage Profile Logging....................... Off
- Foreign Profile Logging........................ Off
- Load Profile Logging........................... Off
- Noise Profile Logging.......................... Off
- Performance Profile Logging.................... Off
- TxPower Update Logging......................... Off
- Default 802.11a AP performance profiles
- 802.11a Global Interference threshold.......... 10 %
- 802.11a Global noise threshold................. -70 dBm
- 802.11a Global RF utilization threshold........ 80 %
- 802.11a Global throughput threshold............ 1000000 bps
- 802.11a Global clients threshold............... 12 clients
- Default 802.11a AP monitoring
- 802.11a Monitor Mode........................... enable
- 802.11a Monitor Mode for Mesh AP Backhaul...... disable
- 802.11a Monitor Channels....................... Country channels
- 802.11a RRM Neighbor Discover Type............. Transparent
- 802.11a AP Coverage Interval................... 180 seconds
- 802.11a AP Load Interval....................... 60 seconds
- --More or (q)uit current module or <ctrl-z> to abort
- 802.11a AP Noise Interval...................... 180 seconds
- 802.11a AP Signal Strength Interval............ 60 seconds
- Automatic Transmit Power Assignment
- Transmit Power Assignment Mode................. AUTO
- Transmit Power Update Interval................. 600 seconds
- Transmit Power Threshold....................... -70 dBm
- Transmit Power Neighbor Count.................. 3 APs
- Min Transmit Power............................. -10 dBm
- Max Transmit Power............................. 30 dBm
- Transmit Power Update Contribution............. SNI..
- Transmit Power Assignment Leader............... Cisco_ZG (192.168.1.20)
- Last Run....................................... 473 seconds ago
- Coverage Hole Detection
- 802.11a Coverage Hole Detection Mode........... Enabled
- 802.11a Coverage Voice Packet Count............ 100 packets
- 802.11a Coverage Voice Packet Percentage....... 50%
- 802.11a Coverage Voice RSSI Threshold.......... -80 dBm
- 802.11a Coverage Data Packet Count............. 50 packets
- 802.11a Coverage Data Packet Percentage........ 50%
- 802.11a Coverage Data RSSI Threshold........... -80 dBm
- 802.11a Global coverage exception level........ 25 %
- 802.11a Global client minimum exception lev.... 3 clients
- Automatic Channel Assignment
- --More or (q)uit current module or <ctrl-z> to abort
- Channel Assignment Mode........................ AUTO
- Channel Update Interval........................ 600 seconds
- Anchor time (Hour of the day).................. 0
- Channel Update Contribution.................... SNI..
- CleanAir Event-driven RRM option............... Disabled
- CleanAir Event-driven RRM sensitivity.......... Medium
- Channel Assignment Leader...................... Cisco_ZG (192.168.1.20)
- Last Run....................................... 473 seconds ago
- DCA Sensitivity Level.......................... MEDIUM (15 dB)
- DCA 802.11n Channel Width...................... 20 MHz
- DCA Minimum Energy Limit....................... -95 dBm
- Channel Energy Levels
- Minimum...................................... unknown
- Average...................................... unknown
- Maximum...................................... unknown
- Channel Dwell Times
- Minimum...................................... unknown
- Average...................................... unknown
- Maximum...................................... unknown
- 802.11a 5 GHz Auto-RF Channel List
- Allowed Channel List......................... 36,40,44,48,52,56,60,64
- Unused Channel List..........................
- DCA Outdoor AP option.......................... Disabled
- -More or (q)uit current module or <ctrl-z> to abort
- Radio RF Grouping
- 802.11a Group Mode............................. AUTO
- 802.11a Group Update Interval.................. 600 seconds
- 802.11a Group Leader........................... Cisco_ZG (192.168.1.20)
- 802.11a Group Member......................... Cisco_ZG (192.168.1.20)
- 802.11a Last Run............................... 473 seconds ago
- 802.11a CleanAir Configuration
- Clean Air Solution............................... Disabled
- Air Quality Settings:
- Air Quality Reporting........................ Enabled
- Air Quality Reporting Period (min)........... 15
- Air Quality Alarms........................... Enabled
- Air Quality Alarm Threshold.................. 35
- Interference Device Settings:
- Interference Device Reporting................ Enabled
- Interference Device Types:
- TDD Transmitter.......................... Enabled
- Jammer................................... Enabled
- Continuous Transmitter................... Enabled
- DECT-like Phone.......................... Enabled
- Video Camera............................. Enabled
- WiFi Inverted............................ Enabled
- --More or (q)uit current module or <ctrl-z> to abort
- WiFi Invalid Channel..................... Enabled
- SuperAG.................................. Enabled
- Canopy................................... Enabled
- WiMax Mobile............................. Enabled
- WiMax Fixed.............................. Enabled
- Interference Device Alarms................... Enabled
- Interference Device Types Triggering Alarms:
- TDD Transmitter.......................... Disabled
- Jammer................................... Enabled
- Continuous Transmitter................... Disabled
- DECT-like Phone.......................... Disabled
- Video Camera............................. Disabled
- WiFi Inverted............................ Enabled
- WiFi Invalid Channel..................... Enabled
- SuperAG.................................. Disabled
- Canopy................................... Disabled
- WiMax Mobile............................. Disabled
- WiMax Fixed.............................. Disabled
- Additional Clean Air Settings:
- CleanAir Event-driven RRM State.............. Disabled
- CleanAir Driven RRM Sensitivity.............. Medium
- CleanAir Persistent Devices state............ Disabled
- --More or (q)uit current module or <ctrl-z> to abort
- 802.11a CleanAir AirQuality Summary
- AQ = Air Quality
- DFS = Dynamic Frequency Selection
- AP Name Channel Avg AQ Min AQ Interferers DFS
- ------------------ ------- ------ ------ ----------- ---
- Press Enter to continue or <ctrl-z> to abort
- 802.11b Configuration
- 802.11b Network.................................. Enabled
- 11gSupport....................................... Enabled
- 11nSupport....................................... Enabled
- 802.11b/g Operational Rates
- 802.11b/g 1M Rate............................ Mandatory
- 802.11b/g 2M Rate............................ Mandatory
- 802.11b/g 5.5M Rate.......................... Mandatory
- 802.11b/g 11M Rate........................... Mandatory
- 802.11g 6M Rate.............................. Supported
- 802.11g 9M Rate.............................. Supported
- 802.11g 12M Rate............................. Supported
- 802.11g 18M Rate............................. Supported
- 802.11g 24M Rate............................. Supported
- 802.11g 36M Rate............................. Supported
- 802.11g 48M Rate............................. Supported
- 802.11g 54M Rate............................. Supported
- 802.11n MCS Settings:
- MCS 0........................................ Supported
- MCS 1........................................ Supported
- MCS 2........................................ Supported
- MCS 3........................................ Supported
- MCS 4........................................ Supported
- --More or (q)uit current module or <ctrl-z> to abort
- MCS 5........................................ Supported
- MCS 6........................................ Supported
- MCS 7........................................ Supported
- MCS 8........................................ Supported
- MCS 9........................................ Supported
- MCS 10....................................... Supported
- MCS 11....................................... Supported
- MCS 12....................................... Supported
- MCS 13....................................... Supported
- MCS 14....................................... Supported
- MCS 15....................................... Supported
- 802.11n Status:
- A-MPDU Tx:
- Priority 0............................... Enabled
- Priority 1............................... Disabled
- Priority 2............................... Disabled
- Priority 3............................... Disabled
- Priority 4............................... Enabled
- Priority 5............................... Enabled
- Priority 6............................... Disabled
- Priority 7............................... Disabled
- A-MSDU Tx:
- Priority 0............................... Enabled
- --More or (q)uit current module or <ctrl-z> to abort
- Priority 1............................... Enabled
- Priority 2............................... Enabled
- Priority 3............................... Enabled
- Priority 4............................... Enabled
- Priority 5............................... Enabled
- Priority 6............................... Disabled
- Priority 7............................... Disabled
- Rifs Rx ..................................... Enabled
- Guard Interval .............................. Any
- Beacon Interval.................................. 100
- CF Pollable mode................................. Disabled
- CF Poll Request mandatory........................ Disabled
- CFP Period....................................... 4
- CFP Maximum Duration............................. 60
- Default Channel.................................. 1
- Default Tx Power Level........................... 0
- DTPC Status..................................... Enabled
- Call Admission Limit ........................... 105
- G711 CU Quantum ................................. 15
- ED Threshold..................................... -50
- Fragmentation Threshold.......................... 2346
- PBCC mandatory................................... Disabled
- RTS Threshold.................................... 2347
- -More or (q)uit current module or <ctrl-z> to abort
- Short Preamble mandatory......................... Enabled
- Short Retry Limit................................ 7
- Legacy Tx Beamforming setting.................... Disabled
- Traffic Stream Metrics Status.................... Disabled
- Expedited BW Request Status...................... Disabled
- World Mode....................................... Enabled
- Faster Carrier Tracking Loop..................... Disabled
- EDCA profile type................................ default-wmm
- Voice MAC optimization status.................... Disabled
- Call Admission Control (CAC) configuration
- Voice AC - Admission control (ACM)............ Disabled
- Voice Stream-Size............................. 84000
- Voice Max-Streams............................. 2
- Voice max RF bandwidth........................ 75
- Voice reserved roaming bandwidth.............. 6
- Voice CAC Method.............................. Load-Based
- Voice tspec inactivity timeout................ Disabled
- CAC SIP-Voice configuration
- SIP based CAC ................................ Disabled
- SIP Codec Type ............................... CODEC_TYPE_G711
- SIP call bandwidth: .......................... 64
- SIP call bandwidth sample-size ............... 20
- Video AC - Admission control (ACM)............ Disabled
- --More or (q)uit current module or <ctrl-z> to abort
- Video max RF bandwidth........................ Infinite
- Video reserved roaming bandwidth.............. 0
- Best-effort AC - Admission control (ACM)...... Disabled
- Background AC - Admission control (ACM)....... Disabled
- Press Enter to continue or <ctrl-z> to abort
- 802.11b Advanced Configuration
- AP Name MAC Address Admin State Operation State Channel TxPower
- -------------------------------- ------------------ ------------ --------------- ---------- --------
- AP30f7.0d13.2e3e 34:bd:c8:48:17:20 ENABLED UP 1* 1(*)
- AP30f7.0d13.07ed 34:bd:c8:48:12:d0 ENABLED UP 9* 1(*)
- Press Enter to continue or <ctrl-z> to abort
- 802.11b Airewave Director Configuration
- RF Event and Performance Logging
- Channel Update Logging......................... Off
- Coverage Profile Logging....................... Off
- Foreign Profile Logging........................ Off
- Load Profile Logging........................... Off
- Noise Profile Logging.......................... Off
- Performance Profile Logging.................... Off
- Transmit Power Update Logging.................. Off
- Default 802.11b AP performance profiles
- 802.11b Global Interference threshold.......... 10 %
- 802.11b Global noise threshold................. -70 dBm
- 802.11b Global RF utilization threshold........ 80 %
- 802.11b Global throughput threshold............ 1000000 bps
- 802.11b Global clients threshold............... 12 clients
- Default 802.11b AP monitoring
- 802.11b Monitor Mode........................... enable
- 802.11b Monitor Channels....................... Country channels
- 802.11b RRM Neighbor Discovery Type............ Transparent
- 802.11b AP Coverage Interval................... 180 seconds
- 802.11b AP Load Interval....................... 60 seconds
- 802.11b AP Noise Interval...................... 180 seconds
- --More or (q)uit current module or <ctrl-z> to abort
- 802.11b AP Signal Strength Interval............ 60 seconds
- Automatic Transmit Power Assignment
- Transmit Power Assignment Mode................. AUTO
- Transmit Power Update Interval................. 600 seconds
- Transmit Power Threshold....................... -70 dBm
- Transmit Power Neighbor Count.................. 3 APs
- Min Transmit Power............................. -10 dBm
- Max Transmit Power............................. 30 dBm
- Transmit Power Update Contribution............. SNI..
- Transmit Power Assignment Leader............... Cisco_ZG (192.168.1.20)
- Last Run....................................... 93 seconds ago
- Coverage Hole Detection
- 802.11b Coverage Hole Detection Mode........... Enabled
- 802.11b Coverage Voice Packet Count............ 100 packets
- 802.11b Coverage Voice Packet Percentage....... 50%
- 802.11b Coverage Voice RSSI Threshold.......... -80 dBm
- 802.11b Coverage Data Packet Count............. 50 packets
- 802.11b Coverage Data Packet Percentage........ 50%
- 802.11b Coverage Data RSSI Threshold........... -80 dBm
- 802.11b Global coverage exception level........ 25 %
- 802.11b Global client minimum exception lev.... 3 clients
- Automatic Channel Assignment
- Channel Assignment Mode........................ AUTO
- --More or (q)uit current module or <ctrl-z> to abort
- Channel Update Interval........................ 600 seconds
- Anchor time (Hour of the day).................. 0
- Channel Update Contribution.................... SNI..
- CleanAir Event-driven RRM option............... Disabled
- CleanAir Event-driven RRM sensitivity.......... Medium
- Channel Assignment Leader...................... Cisco_ZG (192.168.1.20)
- Last Run....................................... 93 seconds ago
- DCA Sensitivity Level: ...................... MEDIUM (10 dB)
- DCA Minimum Energy Limit....................... -95 dBm
- Channel Energy Levels
- Minimum...................................... -78 dBm
- Average...................................... -78 dBm
- Maximum...................................... -78 dBm
- Channel Dwell Times
- Minimum...................................... 0 days, 00 h 21 m 38 s
- Average...................................... 0 days, 07 h 56 m 21 s
- Maximum...................................... 0 days, 15 h 31 m 04 s
- 802.11b Auto-RF Allowed Channel List........... 1,5,9,13
- Auto-RF Unused Channel List.................... 2,3,4,6,7,8,10,11,12
- Radio RF Grouping
- 802.11b Group Mode............................. AUTO
- 802.11b Group Update Interval.................. 600 seconds
- --More or (q)uit current module or <ctrl-z> to abort
- 802.11b Group Leader........................... Cisco_ZG (192.168.1.20)
- 802.11b Group Member......................... Cisco_ZG (192.168.1.20)
- 802.11b Last Run............................... 93 seconds ago
- 802.11a CleanAir Configuration
- Clean Air Solution............................... Disabled
- Air Quality Settings:
- Air Quality Reporting........................ Enabled
- Air Quality Reporting Period (min)........... 15
- Air Quality Alarms........................... Enabled
- Air Quality Alarm Threshold.................. 35
- Interference Device Settings:
- Interference Device Reporting................ Enabled
- Interference Device Types:
- Bluetooth Link........................... Enabled
- Microwave Oven........................... Enabled
- 802.11 FH................................ Enabled
- Bluetooth Discovery...................... Enabled
- TDD Transmitter.......................... Enabled
- Jammer................................... Enabled
- Continuous Transmitter................... Enabled
- DECT-like Phone.......................... Enabled
- Video Camera............................. Enabled
- --More or (q)uit current module or <ctrl-z> to abort
- 802.15.4................................. Enabled
- WiFi Inverted............................ Enabled
- WiFi Invalid Channel..................... Enabled
- SuperAG.................................. Enabled
- Canopy................................... Enabled
- Microsoft Device......................... Enabled
- WiMax Mobile............................. Enabled
- WiMax Fixed.............................. Enabled
- Interference Device Alarms................... Enabled
- Interference Device Types Triggering Alarms:
- Bluetooth Link........................... Disabled
- Microwave Oven........................... Disabled
- 802.11 FH................................ Disabled
- Bluetooth Discovery...................... Disabled
- TDD Transmitter.......................... Disabled
- Jammer................................... Enabled
- Continuous Transmitter................... Disabled
- DECT-like Phone.......................... Disabled
- Video Camera............................. Disabled
- 802.15.4................................. Disabled
- WiFi Inverted............................ Enabled
- WiFi Invalid Channel..................... Enabled
- SuperAG.................................. Disabled
- --More or (q)uit current module or <ctrl-z> to abort
- Canopy................................... Disabled
- Microsoft Device......................... Disabled
- WiMax Mobile............................. Disabled
- WiMax Fixed.............................. Disabled
- Additional Clean Air Settings:
- CleanAir Event-driven RRM State.............. Disabled
- CleanAir Driven RRM Sensitivity.............. Medium
- CleanAir Persistent Devices state............ Disabled
- 802.11a CleanAir AirQuality Summary
- AQ = Air Quality
- DFS = Dynamic Frequency Selection
- AP Name Channel Avg AQ Min AQ Interferers DFS
- ------------------ ------- ------ ------ ----------- ---
- Press Enter to continue or <ctrl-z> to abort
- Mobility Configuration
- Symmetric Mobility Tunneling (current) .......... Enabled
- Symmetric Mobility Tunneling (after reboot) ..... Enabled
- Mobility Protocol Port........................... 16666
- Default Mobility Domain.......................... WiFi
- Multicast Mode .................................. Disabled
- Mobility Domain ID for 802.11r................... 0x3f06
- Mobility Keepalive Interval...................... 10
- Mobility Keepalive Count......................... 3
- Mobility Group Members Configured................ 1
- Mobility Control Message DSCP Value.............. 0
- Controllers configured in the Mobility Group
- MAC Address IP Address Group Name Multicast IP Status
- d4:8c:b5:c2:a1:00 192.168.1.20 WiFi 0.0.0.0 Up
- Press Enter to continue or <ctrl-z> to abort
- Mobility Foreign Map Configuration
- WLAN ID Foreign Mac Address Interface
- ------- ------------------- ---------
- Press Enter to continue or <ctrl-z> to abort
- Advanced Configuration
- Probe request filtering.......................... Enabled
- Probes fwd to controller per client per radio.... 2
- Probe request rate-limiting interval............. 500 msec
- Aggregate Probe request interval................. 500 msec
- EAP-Identity-Request Timeout (seconds)........... 30
- EAP-Identity-Request Max Retries................. 2
- EAP Key-Index for Dynamic WEP.................... 0
- EAP Max-Login Ignore Identity Response........... enable
- EAP-Request Timeout (seconds).................... 30
- EAP-Request Max Retries.......................... 2
- EAPOL-Key Timeout (milliseconds)................. 1000
- EAPOL-Key Max Retries............................ 2
- EAP-Broadcast Key Interval....................... 3600
- Fastpath Packet Capture.......................... disable
- Fastpath Fast Cache Control...................... enable
- Fastpath Fast Testmode........................... 0x0
- dot11-padding.................................... Disabled
- Press Enter to continue or <ctrl-z> to abort
- Location Configuration
- RFID Tag data Collection......................... Enabled
- RFID timeout.................................... 1200 seconds
- RFID mobility.................................... Oui:00:14:7e : Vendor:pango State:Disabled
- Press Enter to continue or <ctrl-z> to abort
- Interface Configuration
- Interface Name................................... management
- MAC Address...................................... d4:8c:b5:c2:a1:00
- IP Address....................................... 192.168.1.20
- IP Netmask....................................... 255.255.255.0
- IP Gateway....................................... 192.168.1.1
- External NAT IP State............................ Disabled
- External NAT IP Address.......................... 0.0.0.0
- VLAN............................................. untagged
- Quarantine-vlan.................................. 0
- Active Physical Port............................. 1
- Primary Physical Port............................ 1
- Backup Physical Port............................. Unconfigured
- Primary DHCP Server.............................. 192.168.1.1
- Secondary DHCP Server............................ Unconfigured
- DHCP Option 82................................... Disabled
- ACL.............................................. Unconfigured
- AP Manager....................................... Yes
- Guest Interface.................................. No
- L2 Multicast..................................... Disabled
- Interface Name................................... virtual
- MAC Address...................................... d4:8c:b5:c2:a1:00
- IP Address....................................... 192.168.10.1
- DHCP Option 82................................... Disabled
- Virtual DNS Host Name............................ Disabled
- AP Manager....................................... No
- Guest Interface.................................. No
- WLAN Configuration
- WLAN Identifier.................................. 1
- Profile Name..................................... KTS-NEW
- Network Name (SSID).............................. KTS-NEW
- Status........................................... Enabled
- MAC Filtering.................................... Disabled
- Broadcast SSID................................... Enabled
- AAA Policy Override.............................. Enabled
- Network Admission Control
- Radius-NAC State............................... Disabled
- SNMP-NAC State................................. Disabled
- Quarantine VLAN................................ 0
- Maximum number of Associated Clients............. 0
- Number of Active Clients......................... 29
- Exclusionlist Timeout............................ 60 seconds
- Session Timeout.................................. 1800 seconds
- CHD per WLAN..................................... Enabled
- Webauth DHCP exclusion........................... Disabled
- Interface........................................ management
- Multicast Interface.............................. Not Configured
- --More or (q)uit current module or <ctrl-z> to abort
- WLAN ACL......................................... unconfigured
- DHCP Server...................................... Default
- DHCP Address Assignment Required................. Disabled
- Static IP client tunneling....................... Disabled
- Quality of Service............................... Silver (best effort)
- Scan Defer Priority.............................. 4,5,6
- Scan Defer Time.................................. 100 milliseconds
- WMM.............................................. Allowed
- WMM UAPSD Compliant Client Support............... Disabled
- Media Stream Multicast-direct.................... Disabled
- CCX - AironetIe Support.......................... Enabled
- CCX - Gratuitous ProbeResponse (GPR)............. Disabled
- CCX - Diagnostics Channel Capability............. Disabled
- Dot11-Phone Mode (7920).......................... Disabled
- Wired Protocol................................... None
- IPv6 Support..................................... Disabled
- Passive Client Feature........................... Disabled
- Peer-to-Peer Blocking Action..................... Disabled
- Radio Policy..................................... All
- DTIM period for 802.11a radio.................... 1
- DTIM period for 802.11b radio.................... 1
- Radius Servers
- Authentication................................ 192.168.1.2 1812
- --More or (q)uit current module or <ctrl-z> to abort
- Accounting.................................... Disabled
- Dynamic Interface............................. Enabled
- Local EAP Authentication......................... Enabled (Profile 'kts')
- Security
- 802.11 Authentication:........................ Open System
- Static WEP Keys............................... Disabled
- 802.1X........................................ Disabled
- Wi-Fi Protected Access (WPA/WPA2)............. Enabled
- WPA (SSN IE)............................... Disabled
- WPA2 (RSN IE).............................. Enabled
- TKIP Cipher............................. Disabled
- AES Cipher.............................. Enabled
- Auth Key Management
- 802.1x.................................. Enabled
- PSK..................................... Disabled
- CCKM.................................... Disabled
- FT(802.11r)............................. Disabled
- FT-PSK(802.11r)......................... Disabled
- FT Reassociation Timeout......................... 20
- FT Over-The-Air mode............................. Enabled
- FT Over-The-Ds mode.............................. Enabled
- CCKM tsf Tolerance............................... 1000
- --More or (q)uit current module or <ctrl-z> to abort
- CKIP ......................................... Disabled
- Web Based Authentication...................... Disabled
- Web-Passthrough............................... Disabled
- Conditional Web Redirect...................... Disabled
- Splash-Page Web Redirect...................... Disabled
- Auto Anchor................................... Disabled
- H-REAP Local Switching........................ Disabled
- H-REAP Local Authentication................... Disabled
- H-REAP Learn IP Address....................... Enabled
- Client MFP.................................... Optional
- Tkip MIC Countermeasure Hold-down Timer....... 60
- Call Snooping.................................... Disabled
- Roamed Call Re-Anchor Policy..................... Disabled
- SIP CAC Fail Send-486-Busy Policy................ Enabled
- SIP CAC Fail Send Dis-Association Policy......... Disabled
- Band Select...................................... Disabled
- Load Balancing................................... Disabled
- Mobility Anchor List
- WLAN ID IP Address Status
- ------- --------------- ------
- Press Enter to continue or <ctrl-z> to abort
- Press Enter to continue or <ctrl-z> to abort
- ACL Configuration
- Press Enter to continue or <ctrl-z> to abort
- CPU ACL Configuration
- CPU Acl Name................................ NOT CONFIGURED
- Wireless Traffic............................ Disabled
- Wired Traffic............................... Disabled
- Press Enter to continue or <ctrl-z> to abort
- RADIUS Configuration
- Vendor Id Backward Compatibility................. Disabled
- Call Station Id Case............................. lower
- Call Station Id Type............................. IP Address
- Aggressive Failover.............................. Enabled
- Keywrap.......................................... Disabled
- Fallback Test:
- Test Mode.................................... Off
- Probe User Name.............................. cisco-probe
- Interval (in seconds)........................ 300
- MAC Delimiter for Authentication Messages........ hyphen
- MAC Delimiter for Accounting Messages............ hyphen
- Authentication Servers
- Idx Type Server Address Port State Tout RFC3576 IPSec - AuthMode/Phase1/Group/Lifetime/Auth/Encr
- --- ---- ---------------- ------ -------- ---- ------- ------------------------------------------------
- 1 NM 192.168.1.2 1812 Enabled 2 Disabled Disabled - none/unknown/group-0/0 none/none
- Accounting Servers
- Idx Type Server Address Port State Tout RFC3576 IPSec - AuthMode/Phase1/Group/Lifetime/Auth/Encr
- TACACS Configuration
- Authentication Servers
- Idx Server Address Port State Tout
- --- ---------------- ------ -------- ----
- Authorization Servers
- Idx Server Address Port State Tout
- --- ---------------- ------ -------- ----
- Accounting Servers
- Idx Server Address Port State Tout
- --- ---------------- ------ -------- ----
- Press Enter to continue or <ctrl-z> to abort
- LDAP Configuration
- Press Enter to continue or <ctrl-z> to abort
- Local EAP Configuration
- User credentials database search order:
- Primary ..................................... Local DB
- Timer:
- Active timeout .............................. 300
- Configured EAP profiles:
- Name ........................................ kts
- Certificate issuer ........................ cisco
- Peer verification options:
- Check against CA certificates ........... Disabled
- Verify certificate CN identity .......... Disabled
- Check certificate date validity ......... Disabled
- EAP-FAST configuration:
- Local certificate required .............. No
- Client certificate required ............. No
- Enabled methods ........................... leap fast peap
- Configured on WLANs ....................... 1
- EAP Method configuration:
- EAP-FAST:
- --More or (q)uit current module or <ctrl-z> to abort
- Server key ................................ <hidden>
- TTL for the PAC ........................... 10
- Anonymous provision allowed ............... Yes
- Authority ID .............................. 436973636f0000000000000000000000
- Authority Information ..................... Cisco A-ID
- Press Enter to continue or <ctrl-z> to abort
- HREAP Group Summary
- HREAP Group Summary: Count: 0
- Group Name # Aps
- Press Enter to continue or <ctrl-z> to abort
- HREAP Group Detail
- Press Enter to continue or <ctrl-z> to abort
- Route Info
- Number of Routes................................. 0
- Destination Network Netmask Gateway
- ------------------- ------------------- -------------------
- Press Enter to continue or <ctrl-z> to abort
- Qos Queue Length Info
- Platinum queue length............................ 100
- Gold queue length................................ 75
- Silver queue length.............................. 50
- Bronze queue length.............................. 25
- Press Enter to continue or <ctrl-z> to abort
- Mac Filter Info
- Press Enter to continue or <ctrl-z> to abort
- Authorization List
- Authorize MIC APs against AAA ................... disabled
- Authorize LSC APs against Auth-List ............. disabled
- APs Allowed to Join
- AP with Manufacturing Installed Certificate.... yes
- AP with Self-Signed Certificate................ no
- AP with Locally Significant Certificate........ no
- Press Enter to continue or <ctrl-z> to abort
- Load Balancing Info
- Aggressive Load Balancing........................ per WLAN enabling
- Aggressive Load Balancing Window................. 5 clients
- Aggressive Load Balancing Denial Count........... 3
- Statistics
- Total Denied Count............................... 0 clients
- Total Denial Sent................................ 0 messages
- Exceeded Denial Max Limit Count.................. 0 times
- None 5G Candidate Count.......................... 0 times
- None 2.4G Candidate Count........................ 0 times
- Press Enter to continue or <ctrl-z> to abort
- DHCP Info
- No leases allocated.
- DHCP Opt-82 RID Format: <AP radio MAC address>
- DHCP Proxy Behaviour: disabled
- Press Enter to continue or <ctrl-z> to abort
- CDP Configuration
- cdp version v2
- Press Enter to continue or <ctrl-z> to abort
- Country Channels Configuration
- Configured Country............................. BY - Belarus
- KEY: * = Channel is legal in this country and may be configured manually.
- A = Channel is the Auto-RF default in this country.
- . = Channel is not legal in this country.
- C = Channel has been configured for use by Auto-RF.
- x = Channel is available to be configured for use by Auto-RF.
- (-,-) = (indoor, outdoor) regulatory doamin allowed by this country.
- -----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
- 802.11bg :
- Channels : 1 1 1 1 1
- : 1 2 3 4 5 6 7 8 9 0 1 2 3 4
- -----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
- BY (-E ,- ): A * * * A * * * A * * * A .
- -----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
- 802.11a : 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
- Channels : 3 3 3 4 4 4 4 4 5 5 6 6 0 0 0 1 1 2 2 2 3 3 4 4 5 5 6 6
- : 4 6 8 0 2 4 6 8 2 6 0 4 0 4 8 2 6 0 4 8 2 6 0 9 3 7 1 5
- -----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
- BY (-I ,- ): . A . A . A . A A A A A . . . . . . . . . . . . . . . .
- Press Enter to continue or <ctrl-z> to abort
- WPS Configuration Summary
- Auto-Immune
- Auto-Immune.................................... Disabled
- Client Exclusion Policy
- Excessive 802.11-association failures.......... Enabled
- Excessive 802.11-authentication failures....... Enabled
- Excessive 802.1x-authentication................ Enabled
- IP-theft....................................... Enabled
- Excessive Web authentication failure........... Enabled
- Signature Policy
- Signature Processing........................... Enabled
- Press Enter to continue or <ctrl-z> to abort
- Custom Web Configuration
- Radius Authentication Method..................... PAP
- Cisco Logo....................................... Enabled
- CustomLogo....................................... None
- Custom Title..................................... None
- Custom Message................................... None
- Custom Redirect URL.............................. None
- Web Authentication Type.......................... Internal Default
- External Web Authentication URL.................. None
- Configuration Per Profile:
- Press Enter to continue or <ctrl-z> to abort
- Core dump Configuration
- Core Dump is disabled
- Press Enter to continue or <ctrl-z> to abort
- Rogue AP Configuration
- Rogue on wire Auto-Contain....................... Disabled
- Rogue using our SSID Auto-Contain................ Disabled
- Valid client on rogue AP Auto-Contain............ Disabled
- Rogue AP timeout................................. 1200
- Monitor Mode Report Interval..................... 10
- --More or (q)uit current module or <ctrl-z> to abort
- Rogue Rule Configuration
- Priority Rule Name State Type Match Hit Count
- -------- ----------------------- -------- ------------- ----- ---------
- Press Enter to continue or <ctrl-z> to abort
- Media-Stream Configuration
- Multicast-direct State........................... disable
- Allowed WLANs....................................
- Stream Name Start IP End IP Operation Status
- ------------- -------------- -------------- ----------------
- URL..............................................
- E-mail...........................................
- Phone............................................
- Note.............................................
- State............................................ disable
- 2.4G Band Media-Stream Configuration
- Multicast-direct................................. Enabled
- Best Effort...................................... Disabled
- URL..............................................
- E-mail...........................................
- Phone............................................
- Note.............................................
- State............................................ disable
- 2.4G Band Media-Stream Configuration
- Multicast-direct................................. Enabled
- Best Effort...................................... Disabled
- --More-- or (q)uit
- Video Re-Direct.................................. Enabled
- Max Allowed Streams Per Radio.................... Auto
- Max Allowed Streams Per Client................... Auto
- Max Video Bandwidth.............................. 0
- Max Voice Bandwidth.............................. 75
- Max Media Bandwidth.............................. 85
- Min PHY Rate..................................... 6000
- Max Retry Percentage............................. 80
- 5G Band Media-Stream Configuration
- Multicast-direct................................. Enabled
- Best Effort...................................... Disabled
- Video Re-Direct.................................. Enabled
- Max Allowed Streams Per Radio.................... Auto
- Max Allowed Streams Per Client................... Auto
- Max Video Bandwidth.............................. 0
- Max Voice Bandwidth.............................. 75
- Max Media Bandwidth.............................. 85
- Min PHY Rate..................................... 6000
- Max Retry Percentage............................. 80
- --More-- or (q)uit
- Number of Clients................................ 0
- Client Mac Stream Name Stream Type Radio WLAN QoS Status
- ----------------- ----------- ----------- ---- ---- ------ -------
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement