Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.0 2012-10-10 r3643 [i686-linux-3.5.6-pmagic] (local build)
- Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.12
- Device Model: ST31000528AS
- Serial Number: 6VP47VCM
- LU WWN Device Id: 5 000c50 00fd4a7d3
- Firmware Version: CC38
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 7200 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Tue Jan 19 17:03:38 2016 UTC
- ==> WARNING: A firmware update for this drive may be available,
- see the following Seagate web pages:
- http://knowledge.seagate.com/articles/en_US/FAQ/207931en
- http://knowledge.seagate.com/articles/en_US/FAQ/213891en
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: FAILED!
- Drive failure expected in less than 24 hours. SAVE ALL DATA.
- See vendor-specific Attribute list for failed Attributes.
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 600) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 181) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x103f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 087 081 006 Pre-fail Always - 209111786
- 3 Spin_Up_Time 0x0003 096 095 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 094 094 020 Old_age Always - 7084
- 5 Reallocated_Sector_Ct 0x0033 005 005 036 Pre-fail Always FAILING_NOW 3932
- 7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always - 13163796432
- 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6396
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3482
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 10285
- 188 Command_Timeout 0x0032 099 091 000 Old_age Always - 64425690775
- 189 High_Fly_Writes 0x003a 096 096 000 Old_age Always - 4
- 190 Airflow_Temperature_Cel 0x0022 065 051 045 Old_age Always - 35 (Min/Max 34/36)
- 194 Temperature_Celsius 0x0022 035 049 000 Old_age Always - 35 (0 14 0 0 0)
- 195 Hardware_ECC_Recovered 0x001a 044 030 000 Old_age Always - 209111786
- 197 Current_Pending_Sector 0x0012 095 078 000 Old_age Always - 225
- 198 Offline_Uncorrectable 0x0010 095 078 000 Old_age Offline - 225
- 199 UDMA_CRC_Error_Count 0x003e 200 198 000 Old_age Always - 23
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 279671090460206
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2955155109
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 855340409
- SMART Error Log Version: 1
- ATA Error Count: 12683 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 12683 occurred at disk power-on lifetime: 6396 hours (266 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 04 ff ff ff ef 00 00:20:57.898 READ DMA EXT
- 25 00 08 ff ff ff ef 00 00:20:57.463 READ DMA EXT
- 27 00 00 00 00 00 e0 00 00:20:57.461 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 00:20:57.442 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 00:20:57.440 SET FEATURES [Set transfer mode]
- Error 12682 occurred at disk power-on lifetime: 6396 hours (266 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 04 ff ff ff ef 00 00:20:53.033 READ DMA EXT
- 27 00 00 00 00 00 e0 00 00:20:53.032 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 00:20:53.013 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 00:20:52.991 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 e0 00 00:20:52.991 READ NATIVE MAX ADDRESS EXT
- Error 12681 occurred at disk power-on lifetime: 6396 hours (266 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 04 ff ff ff ef 00 00:20:48.328 READ DMA EXT
- 25 00 08 ff ff ff ef 00 00:20:48.327 READ DMA EXT
- 25 00 08 ff ff ff ef 00 00:20:48.309 READ DMA EXT
- 25 00 08 ff ff ff ef 00 00:20:41.274 READ DMA EXT
- 25 00 08 ff ff ff ef 00 00:20:40.903 READ DMA EXT
- Error 12680 occurred at disk power-on lifetime: 6396 hours (266 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 04 ff ff ff ef 00 00:17:47.874 READ DMA EXT
- 25 00 08 ff ff ff ef 00 00:17:47.265 READ DMA EXT
- 27 00 00 00 00 00 e0 00 00:17:47.264 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 00:17:47.261 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 00:17:47.258 SET FEATURES [Set transfer mode]
- Error 12679 occurred at disk power-on lifetime: 6396 hours (266 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 04 ff ff ff ef 00 00:17:43.394 READ DMA EXT
- 27 00 00 00 00 00 e0 00 00:17:43.393 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 00 00:17:43.390 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 00:17:43.387 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 e0 00 00:17:43.367 READ NATIVE MAX ADDRESS EXT
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement