API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 19th, 2015
334
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.14 KB | None | 0 0
raw download clone embed print report
  1. [root@server-lax ~]# megacli -AdpAllInfo -aAll
  2. Adapter #0
  3.  
  4. ==============================================================================
  5. Versions
  6. ================
  7. Product Name : LSI MegaRAID SAS 9260-8i
  8. Serial No : SV14608317
  9. FW Package Build: 12.12.0-0128
  10.  
  11. Mfg. Data
  12. ================
  13. Mfg. Date : 11/08/11
  14. Rework Date : 00/00/00
  15. Revision No : 74B
  16. Battery FRU : N/A
  17.  
  18. Image Versions in Flash:
  19. ================
  20. FW Version : 2.130.353-1918
  21. BIOS Version : 3.24.00_4.12.05.00_0x05160000
  22. Preboot CLI Version: 04.04-020:#%00009
  23. WebBIOS Version : 6.0-49-e_45-Rel
  24. NVDATA Version : 2.09.03-0032
  25. Boot Block Version : 2.02.00.00-0000
  26. BOOT Version : 09.250.01.219
  27.  
  28. Pending Images in Flash
  29. ================
  30. None
  31.  
  32. PCI Info
  33. ================
  34. Controller Id : 0000
  35. Vendor Id : 1000
  36. Device Id : 0079
  37. SubVendorId : 1000
  38. SubDeviceId : 9261
  39.  
  40. Host Interface : PCIE
  41.  
  42. ChipRevision : B4
  43.  
  44. Number of Frontend Port: 0
  45. Device Interface : PCIE
  46.  
  47. Number of Backend Port: 8
  48. Port : Address
  49. 0 4433221101000000
  50. 1 4433221106000000
  51. 2 4433221104000000
  52. 3 4433221103000000
  53. 4 0000000000000000
  54. 5 0000000000000000
  55. 6 0000000000000000
  56. 7 0000000000000000
  57.  
  58. HW Configuration
  59. ================
  60. SAS Address : 500605b004090a10
  61. BBU : Present
  62. Alarm : Present
  63. NVRAM : Present
  64. Serial Debugger : Present
  65. Memory : Present
  66. Flash : Present
  67. Memory Size : 512MB
  68. TPM : Absent
  69. On board Expander: Absent
  70. Upgrade Key : Absent
  71. Temperature sensor for ROC : Absent
  72. Temperature sensor for controller : Absent
  73.  
  74.  
  75. Settings
  76. ================
  77. Current Time : 7:37:55 5/19, 2015
  78. Predictive Fail Poll Interval : 300sec
  79. Interrupt Throttle Active Count : 16
  80. Interrupt Throttle Completion : 50us
  81. Rebuild Rate : 30%
  82. PR Rate : 30%
  83. BGI Rate : 30%
  84. Check Consistency Rate : 30%
  85. Reconstruction Rate : 30%
  86. Cache Flush Interval : 4s
  87. Max Drives to Spinup at One Time : 4
  88. Delay Among Spinup Groups : 2s
  89. Physical Drive Coercion Mode : Disabled
  90. Cluster Mode : Disabled
  91. Alarm : Enabled
  92. Auto Rebuild : Enabled
  93. Battery Warning : Enabled
  94. Ecc Bucket Size : 15
  95. Ecc Bucket Leak Rate : 1440 Minutes
  96. Restore HotSpare on Insertion : Disabled
  97. Expose Enclosure Devices : Enabled
  98. Maintain PD Fail History : Enabled
  99. Host Request Reordering : Enabled
  100. Auto Detect BackPlane Enabled : SGPIO/i2c SEP
  101. Load Balance Mode : Auto
  102. Use FDE Only : No
  103. Security Key Assigned : No
  104. Security Key Failed : No
  105. Security Key Not Backedup : No
  106. Default LD PowerSave Policy : Controller Defined
  107. Maximum number of direct attached drives to spin up in 1 min : 120
  108. Auto Enhanced Import : No
  109. Any Offline VD Cache Preserved : No
  110. Allow Boot with Preserved Cache : No
  111. Disable Online Controller Reset : No
  112. PFK in NVRAM : No
  113. Use disk activity for locate : No
  114. POST delay : 90 seconds
  115.  
  116. Capabilities
  117. ================
  118. RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span
  119. Supported Drives : SAS, SATA
  120. Boot Volume Supported : NO
  121.  
  122. Allowed Mixing:
  123.  
  124. Mix in Enclosure Allowed
  125. Mix of SAS/SATA of HDD type in VD Allowed
  126.  
  127. Status
  128. ================
  129. ECC Bucket Count : 0
  130.  
  131. Limitations
  132. ================
  133. Max Arms Per VD : 32
  134. Max Spans Per VD : 8
  135. Max Arrays : 128
  136. Max Number of VDs : 64
  137. Max Parallel Commands : 1008
  138. Max SGE Count : 80
  139. Max Data Transfer Size : 8192 sectors
  140. Max Strips PerIO : 42
  141. Max LD per array : 16
  142. Min Strip Size : 8 KB
  143. Max Strip Size : 1.0 MB
  144. Max Configurable CacheCade Size: 0 GB
  145. Current Size of CacheCade : 0 GB
  146. Current Size of FW Cache : 346 MB
  147.  
  148. Device Present
  149. ================
  150. Virtual Drives : 1
  151. Degraded : 0
  152. Offline : 0
  153. Physical Devices : 5
  154. Disks : 4
  155. Critical Disks : 0
  156. Failed Disks : 0
  157.  
  158. Supported Adapter Operations
  159. ================
  160. Rebuild Rate : Yes
  161. CC Rate : Yes
  162. BGI Rate : Yes
  163. Reconstruct Rate : Yes
  164. Patrol Read Rate : Yes
  165. Alarm Control : Yes
  166. Cluster Support : No
  167. BBU : Yes
  168. Spanning : Yes
  169. Dedicated Hot Spare : Yes
  170. Revertible Hot Spares : Yes
  171. Foreign Config Import : Yes
  172. Self Diagnostic : Yes
  173. Allow Mixed Redundancy on Array : No
  174. Global Hot Spares : Yes
  175. Deny SCSI Passthrough : No
  176. Deny SMP Passthrough : No
  177. Deny STP Passthrough : No
  178. Support Security : No
  179. Snapshot Enabled : No
  180. Support the OCE without adding drives : Yes
  181. Support PFK : Yes
  182. Support PI : No
  183. Support Boot Time PFK Change : No
  184. Disable Online PFK Change : No
  185. PFK TrailTime Remaining : 0 days 0 hours
  186. Support Shield State : No
  187. Block SSD Write Disk Cache Change: No
  188. Point In Time Progress: No
  189.  
  190. Supported VD Operations
  191. ================
  192. Read Policy : Yes
  193. Write Policy : Yes
  194. IO Policy : Yes
  195. Access Policy : Yes
  196. Disk Cache Policy : Yes
  197. Reconstruction : Yes
  198. Deny Locate : No
  199. Deny CC : No
  200. Allow Ctrl Encryption: No
  201. Enable LDBBM : No
  202. Support Breakmirror : No
  203. Power Savings : No
  204.  
  205. Supported PD Operations
  206. ================
  207. Force Online : Yes
  208. Force Offline : Yes
  209. Force Rebuild : Yes
  210. Deny Force Failed : No
  211. Deny Force Good/Bad : No
  212. Deny Missing Replace : No
  213. Deny Clear : No
  214. Deny Locate : No
  215. Support Temperature : Yes
  216. NCQ : No
  217. Disable Copyback : No
  218. Enable JBOD : No
  219. Enable Copyback on SMART : No
  220. Enable Copyback to SSD on SMART Error : Yes
  221. Enable SSD Patrol Read : No
  222. PR Correct Unconfigured Areas : Yes
  223. Enable Spin Down of UnConfigured Drives : Yes
  224. Disable Spin Down of hot spares : No
  225. Spin Down time : 30
  226. T10 Power State : No
  227. Error Counters
  228. ================
  229. Memory Correctable Errors : 0
  230. Memory Uncorrectable Errors : 0
  231.  
  232. High Availability Properties
  233. ================
  234. Topology Type : None
  235. Cluster Information
  236. ================
  237. Cluster Permitted : No
  238. Cluster Active : No
  239.  
  240. Default Settings
  241. ================
  242. Phy Polarity : 0
  243. Phy PolaritySplit : 0
  244. Background Rate : 30
  245. Strip Size : 64kB
  246. Flush Time : 4 seconds
  247. Write Policy : WB
  248. Read Policy : Adaptive
  249. Cache When BBU Bad : Disabled
  250. Cached IO : No
  251. SMART Mode : Mode 6
  252. Alarm Disable : Yes
  253. Coercion Mode : None
  254. ZCR Config : Unknown
  255. Dirty LED Shows Drive Activity : No
  256. BIOS Continue on Error : No
  257. Spin Down Mode : None
  258. Allowed Device Type : SAS/SATA Mix
  259. Allow Mix in Enclosure : Yes
  260. Allow HDD SAS/SATA Mix in VD : Yes
  261. Allow SSD SAS/SATA Mix in VD : No
  262. Allow HDD/SSD Mix in VD : No
  263. Allow SATA in Cluster : No
  264. Max Chained Enclosures : 16
  265. Disable Ctrl-R : Yes
  266. Enable Web BIOS : Yes
  267. Direct PD Mapping : No
  268. BIOS Enumerate VDs : Yes
  269. Restore Hot Spare on Insertion : No
  270. Expose Enclosure Devices : Yes
  271. Maintain PD Fail History : Yes
  272. Disable Puncturing : No
  273. Zero Based Enclosure Enumeration : No
  274. PreBoot CLI Enabled : Yes
  275. LED Show Drive Activity : Yes
  276. Cluster Disable : Yes
  277. SAS Disable : No
  278. Auto Detect BackPlane Enable : SGPIO/i2c SEP
  279. Use FDE Only : No
  280. Enable Led Header : Yes
  281. Delay during POST : 0
  282. EnableCrashDump : No
  283. Disable Online Controller Reset : No
  284. EnableLDBBM : No
  285. Un-Certified Hard Disk Drives : Allow
  286. Treat Single span R1E as R10 : No
  287. Max LD per array : 16
  288. Power Saving option : Don't Auto spin down Configured Drives
  289. Max power savings option is not allowed for LDs. Only T10 power conditions are to be used.
  290. Default spin down time in minutes: 30
  291. Enable JBOD : No
  292. TTY Log In Flash : No
  293. Auto Enhanced Import : No
  294. BreakMirror RAID Support : No
  295. Disable Join Mirror : No
  296. Enable Shield State : No
  297. Time taken to detect CME : 60s
  298.  
  299. Exit Code: 0x00
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!