Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.0.0] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Hitachi Deskstar 5K3000
- Device Model: Hitachi HDS5C3020ALA632
- Serial Number: ML0220F30ZED7D
- LU WWN Device Id: 5 000cca 369cdd56a
- Firmware Version: ML6OA580
- User Capacity: 2 000 398 934 016 bytes [2,00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 5940 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sun May 31 14:24:39 2015 MSK
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (23985) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 400) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 134 134 054 Pre-fail Offline - 103
- 3 Spin_Up_Time 0x0007 151 151 024 Pre-fail Always - 371 (Average 357)
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1517
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 148 148 020 Pre-fail Offline - 28
- 9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 24937
- 10 Spin_Retry_Count 0x0013 085 085 060 Pre-fail Always - 196608
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1307
- 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1545
- 193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1545
- 194 Temperature_Celsius 0x0002 125 125 000 Old_age Always - 48 (Min/Max 19/58)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 857
- SMART Error Log Version: 1
- ATA Error Count: 857 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 857 occurred at disk power-on lifetime: 14017 hours (584 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 08 97 13 f7 06 Error: ICRC, ABRT at LBA = 0x06f71397 = 116855703
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 28 08 96 13 f7 46 ff 00:03:38.047 WRITE FPDMA QUEUED
- 61 28 00 77 13 f7 40 08 00:03:38.047 WRITE FPDMA QUEUED
- 60 78 00 b7 f7 cf 40 08 00:03:38.040 READ FPDMA QUEUED
- 60 00 00 b7 f6 cf 40 08 00:03:38.038 READ FPDMA QUEUED
- 60 00 00 b7 f5 cf 40 08 00:03:38.036 READ FPDMA QUEUED
- Error 856 occurred at disk power-on lifetime: 14017 hours (584 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 60 6f 67 1d 07 Error: ICRC, ABRT at LBA = 0x071d676f = 119367535
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 90 60 6e 67 1d 47 ff 00:03:26.273 WRITE FPDMA QUEUED
- 61 90 00 3f 67 1d 40 08 00:03:26.273 WRITE FPDMA QUEUED
- 61 28 00 ff 8e eb 40 08 00:03:26.235 WRITE FPDMA QUEUED
- 60 a8 00 1f 9b cd 40 08 00:03:26.219 READ FPDMA QUEUED
- 60 80 08 9f 9a cd 40 08 00:03:26.218 READ FPDMA QUEUED
- Error 855 occurred at disk power-on lifetime: 14017 hours (584 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 70 4f fe 9a 01 Error: ICRC, ABRT at LBA = 0x019afe4f = 26934863
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 38 6f 3d 25 40 08 00:01:41.467 WRITE FPDMA QUEUED
- 61 08 30 3f 3d 25 40 08 00:01:41.467 WRITE FPDMA QUEUED
- 61 08 28 2f 3d 25 40 08 00:01:41.467 WRITE FPDMA QUEUED
- 61 18 20 0f 3d 25 40 08 00:01:41.467 WRITE FPDMA QUEUED
- 61 08 18 b7 3c 25 40 08 00:01:41.467 WRITE FPDMA QUEUED
- Error 854 occurred at disk power-on lifetime: 14017 hours (584 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 f0 4f c1 8f 07 Error: ICRC, ABRT at LBA = 0x078fc14f = 126861647
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 b0 f0 4f c1 8f 47 ff 00:01:10.587 WRITE FPDMA QUEUED
- 61 b0 30 bf 16 44 40 08 00:01:10.570 WRITE FPDMA QUEUED
- 61 00 28 3f cc 8f 40 08 00:01:10.570 WRITE FPDMA QUEUED
- 61 00 20 3f c8 8f 40 08 00:01:10.570 WRITE FPDMA QUEUED
- 61 00 18 3f c4 8f 40 08 00:01:10.570 WRITE FPDMA QUEUED
- Error 853 occurred at disk power-on lifetime: 14005 hours (583 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 00 3f 4c 1c 07 Error: ICRC, ABRT at LBA = 0x071c4c3f = 119295039
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 30 0f 4e 1c 47 ff 00:06:55.448 WRITE FPDMA QUEUED
- 61 08 00 7f 02 80 40 08 00:06:55.442 WRITE FPDMA QUEUED
- 61 08 f0 67 02 80 40 08 00:06:55.442 WRITE FPDMA QUEUED
- 61 08 e8 57 02 80 40 08 00:06:55.441 WRITE FPDMA QUEUED
- 61 10 e0 2f 02 80 40 08 00:06:55.441 WRITE FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 24209 -
- # 2 Extended offline Completed without error 00% 18380 -
- # 3 Short offline Completed without error 00% 7179 -
- # 4 Short offline Completed without error 00% 5462 -
- # 5 Extended offline Interrupted (host reset) 60% 5160 -
- # 6 Extended offline Interrupted (host reset) 20% 5151 -
- # 7 Short offline Completed without error 00% 3088 -
- # 8 Short offline Completed without error 00% 2398 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.0.0] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.14 (AF)
- Device Model: ST2000DM001-9YN164
- Serial Number: Z1E1L6LQ
- LU WWN Device Id: 5 000c50 04e862a16
- Firmware Version: CC4H
- User Capacity: 2 000 398 934 016 bytes [2,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sun May 31 14:24:44 2015 MSK
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- See vendor-specific Attribute list for marginal Attributes.
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 575) seconds.
- Offline data collection
- capabilities: (0x73) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 224) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x3085) SCT Status supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 189429248
- 3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 822
- 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 182908108
- 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 19652
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 797
- 183 Runtime_Bad_Block 0x0032 084 084 000 Old_age Always - 16
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 093 093 000 Old_age Always - 7
- 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 0 1 11
- 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 051 045 045 Old_age Always In_the_past 49 (Min/Max 29/54)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 548
- 193 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 12266
- 194 Temperature_Celsius 0x0022 049 055 000 Old_age Always - 49 (0 19 0 0 0)
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 198 000 Old_age Always - 156
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 19114h+17m+43.975s
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 82447554726017
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 90857924346733
- SMART Error Log Version: 1
- ATA Error Count: 34 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 34 occurred at disk power-on lifetime: 116 hours (4 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 01 ff ff ff 4f 00 00:55:14.038 READ DMA EXT
- 25 00 01 00 00 00 40 00 00:55:14.037 READ DMA EXT
- 25 00 01 00 00 00 40 00 00:55:14.037 READ DMA EXT
- 25 00 08 ff ff ff 4f 00 00:55:14.037 READ DMA EXT
- 25 00 f8 ff ff ff 4f 00 00:55:13.428 READ DMA EXT
- Error 33 occurred at disk power-on lifetime: 116 hours (4 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 01 ff ff ff 4f 00 00:55:14.038 READ DMA EXT
- 25 00 01 00 00 00 40 00 00:55:14.037 READ DMA EXT
- 25 00 01 00 00 00 40 00 00:55:14.037 READ DMA EXT
- 25 00 08 ff ff ff 4f 00 00:55:14.037 READ DMA EXT
- 25 00 f8 ff ff ff 4f 00 00:55:13.428 READ DMA EXT
- Error 32 occurred at disk power-on lifetime: 116 hours (4 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 f8 ff ff ff 4f 00 00:55:12.671 READ DMA EXT
- 25 00 01 00 00 00 40 00 00:55:12.671 READ DMA EXT
- 25 00 01 00 00 00 40 00 00:55:12.671 READ DMA EXT
- 35 00 01 ff ff ff 4f 00 00:55:12.670 WRITE DMA EXT
- 25 00 01 00 00 00 40 00 00:55:12.670 READ DMA EXT
- Error 31 occurred at disk power-on lifetime: 116 hours (4 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 f8 ff ff ff 4f 00 00:55:12.671 READ DMA EXT
- 25 00 01 00 00 00 40 00 00:55:12.671 READ DMA EXT
- 25 00 01 00 00 00 40 00 00:55:12.671 READ DMA EXT
- 35 00 01 ff ff ff 4f 00 00:55:12.670 WRITE DMA EXT
- 25 00 01 00 00 00 40 00 00:55:12.670 READ DMA EXT
- Error 30 occurred at disk power-on lifetime: 116 hours (4 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 01 ff ff ff 4f 00 00:55:11.492 READ DMA EXT
- 25 00 01 00 00 00 40 00 00:55:11.487 READ DMA EXT
- 25 00 01 00 00 00 40 00 00:55:11.487 READ DMA EXT
- 25 00 01 00 00 00 40 00 00:55:11.487 READ DMA EXT
- 25 00 08 ff ff ff 4f 00 00:55:11.486 READ DMA EXT
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 18919 -
- # 2 Extended offline Completed without error 00% 13089 -
- # 3 Extended offline Completed without error 00% 2328 -
- # 4 Short offline Completed without error 00% 2321 -
- # 5 Extended offline Completed without error 00% 1559 -
- # 6 Short offline Completed without error 00% 1554 -
- # 7 Extended offline Completed without error 00% 986 -
- # 8 Extended offline Completed without error 00% 589 -
- # 9 Conveyance offline Completed without error 00% 409 -
- #10 Short offline Completed without error 00% 409 -
- #11 Extended offline Completed without error 00% 244 -
- #12 Short offline Completed without error 00% 233 -
- #13 Extended offline Completed without error 00% 121 -
- #14 Conveyance offline Completed without error 00% 116 -
- #15 Short offline Completed without error 00% 116 -
- #16 Extended offline Completed: read failure 90% 111 948309888
- #17 Extended offline Completed: read failure 90% 104 948309888
- #18 Short offline Completed: read failure 90% 98 948309888
- #19 Extended offline Completed: read failure 80% 74 948309888
- #20 Conveyance offline Completed without error 00% 72 -
- #21 Short offline Completed without error 00% 72 -
- 4 of 4 failed self-tests are outdated by newer successful extended offline self-test # 1
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.0.0] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Hitachi Deskstar 5K3000
- Device Model: Hitachi HDS5C3020ALA632
- Serial Number: ML0220F318ADSD
- LU WWN Device Id: 5 000cca 369d1e18e
- Firmware Version: ML6OA580
- User Capacity: 2 000 398 934 016 bytes [2,00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 5940 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sun May 31 14:24:47 2015 MSK
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (22287) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 372) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 135 135 054 Pre-fail Offline - 97
- 3 Spin_Up_Time 0x0007 180 180 024 Pre-fail Always - 369 (Average 239)
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1357
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 146 146 020 Pre-fail Offline - 29
- 9 Power_On_Hours 0x0012 096 096 000 Old_age Always - 28061
- 10 Spin_Retry_Count 0x0013 075 075 060 Pre-fail Always - 327680
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1289
- 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1434
- 193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1434
- 194 Temperature_Celsius 0x0002 125 125 000 Old_age Always - 48 (Min/Max 15/66)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 20873
- SMART Error Log Version: 1
- ATA Error Count: 20873 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 20873 occurred at disk power-on lifetime: 10620 hours (442 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 01 77 83 54 0c Error: ICRC, ABRT at LBA = 0x0c548377 = 206865271
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 00 77 83 54 4c ff 00:04:16.098 READ FPDMA QUEUED
- 60 08 08 70 83 54 40 00 00:04:16.098 READ FPDMA QUEUED
- 60 08 08 68 83 54 40 00 00:04:16.095 READ FPDMA QUEUED
- ef 90 03 00 00 00 00 00 00:04:16.095 SET FEATURES [Disable SATA feature]
- ef 02 00 00 00 00 00 00 00:04:16.095 SET FEATURES [Enable write cache]
- Error 20872 occurred at disk power-on lifetime: 10620 hours (442 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 01 6f 83 54 0c Error: ICRC, ABRT at LBA = 0x0c54836f = 206865263
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 00 6f 83 54 4c ff 00:04:16.068 READ FPDMA QUEUED
- 60 08 08 68 83 54 40 00 00:04:16.064 READ FPDMA QUEUED
- ef 90 03 00 00 00 00 00 00:04:16.064 SET FEATURES [Disable SATA feature]
- ef 02 00 00 00 00 00 00 00:04:16.064 SET FEATURES [Enable write cache]
- 60 08 00 6f 83 54 4c ff 00:04:16.038 READ FPDMA QUEUED
- Error 20871 occurred at disk power-on lifetime: 10620 hours (442 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 01 6f 83 54 0c Error: ICRC, ABRT at LBA = 0x0c54836f = 206865263
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 00 6f 83 54 4c ff 00:04:16.038 READ FPDMA QUEUED
- 60 08 28 68 83 54 40 00 00:04:16.033 READ FPDMA QUEUED
- ef 90 03 00 00 00 00 00 00:04:16.033 SET FEATURES [Disable SATA feature]
- ef 02 00 00 00 00 00 00 00:04:16.033 SET FEATURES [Enable write cache]
- 60 08 00 6f 83 54 4c ff 00:04:16.008 READ FPDMA QUEUED
- Error 20870 occurred at disk power-on lifetime: 10620 hours (442 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 01 6f 83 54 0c Error: ICRC, ABRT at LBA = 0x0c54836f = 206865263
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 00 6f 83 54 4c ff 00:04:16.008 READ FPDMA QUEUED
- 60 08 20 68 83 54 40 00 00:04:16.008 READ FPDMA QUEUED
- 60 08 18 60 83 54 40 00 00:04:16.008 READ FPDMA QUEUED
- 60 08 10 58 83 54 40 00 00:04:16.008 READ FPDMA QUEUED
- 60 08 08 50 83 54 40 00 00:04:16.008 READ FPDMA QUEUED
- Error 20869 occurred at disk power-on lifetime: 10620 hours (442 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 01 4f 83 54 0c Error: ICRC, ABRT at LBA = 0x0c54834f = 206865231
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 00 4f 83 54 4c ff 00:04:15.977 READ FPDMA QUEUED
- 60 08 08 48 83 54 40 00 00:04:15.971 READ FPDMA QUEUED
- ef 90 03 00 00 00 00 00 00:04:15.971 SET FEATURES [Disable SATA feature]
- ef 02 00 00 00 00 00 00 00:04:15.971 SET FEATURES [Enable write cache]
- 60 08 00 4f 83 54 4c ff 00:04:15.947 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 27332 -
- # 2 Extended offline Completed without error 00% 21504 -
- # 3 Short offline Completed without error 00% 16539 -
- # 4 Short offline Completed without error 00% 10187 -
- # 5 Short offline Completed without error 00% 8470 -
- # 6 Extended offline Completed without error 00% 8157 -
- # 7 Short offline Completed without error 00% 6096 -
- # 8 Short offline Completed without error 00% 5406 -
- # 9 Short offline Completed without error 00% 2893 -
- #10 Short offline Completed without error 00% 689 -
- #11 Extended offline Aborted by host 90% 0 -
- #12 Short offline Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.0.0] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate SV35
- Device Model: ST2000VX000-1CU164
- Serial Number: Z1E5969X
- LU WWN Device Id: 5 000c50 0649411ba
- Firmware Version: CV22
- User Capacity: 2 000 398 934 016 bytes [2,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sun May 31 14:24:59 2015 MSK
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 80) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 222) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x10b9) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 64378344
- 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 555
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 64645247
- 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 11505
- 10 Spin_Retry_Count 0x0013 100 099 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 530
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 11
- 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 209
- 190 Airflow_Temperature_Cel 0x0022 054 046 045 Old_age Always - 46 (Min/Max 28/51)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 367
- 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 556
- 194 Temperature_Celsius 0x0022 046 054 000 Old_age Always - 46 (0 19 0 0 0)
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 10773 -
- # 2 Extended offline Completed without error 00% 4952 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement