Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 4.10.1-1-ARCH (builduser@heftig-13232) (gcc version 6.3.1 20170109 (GCC) ) #1 SMP PREEMPT Sun Feb 26 21:08:53 UTC 2017
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e280983a-c2d7-4e09-b48f-66ba93290f85 rw loglevel=3 rd.systemd.show_status=false rd.udev.log-priority=3
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
- [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
- [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdb19fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000bdb1a000-0x00000000bdb49fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000bdb4a000-0x00000000bde09fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000bde0a000-0x00000000bdea8fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000bdea9000-0x00000000bea1efff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000bea1f000-0x00000000bea1ffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000bea20000-0x00000000bec25fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000bec26000-0x00000000bf071fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000bf072000-0x00000000bf7f2fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000bf7f3000-0x00000000bf7fffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.7 present.
- [ 0.000000] DMI: MSI MS-7721/FM2-A55M-E33 (MS-7721), BIOS V11.4 10/12/2013
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF write-through
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-E7FFF uncachable
- [ 0.000000] E8000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
- [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
- [ 0.000000] 2 base 0000BF800000 mask FFFFFF800000 uncachable
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] TOM2: 000000023f000000 aka 9200M
- [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
- [ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
- [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] mapped at [ffff8800000fd8e0]
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] BRK [0x01d60000, 0x01d60fff] PGTABLE
- [ 0.000000] BRK [0x01d61000, 0x01d61fff] PGTABLE
- [ 0.000000] BRK [0x01d62000, 0x01d62fff] PGTABLE
- [ 0.000000] BRK [0x01d63000, 0x01d63fff] PGTABLE
- [ 0.000000] BRK [0x01d64000, 0x01d64fff] PGTABLE
- [ 0.000000] BRK [0x01d65000, 0x01d65fff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x36e49000-0x3771bfff]
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
- [ 0.000000] ACPI: XSDT 0x00000000BDE96078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: FACP 0x00000000BDE9C240 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160930/tbfadt-658)
- [ 0.000000] ACPI: DSDT 0x00000000BDE96178 0060C3 (v02 ALASKA A M I 00000000 INTL 20051117)
- [ 0.000000] ACPI: FACS 0x00000000BDE9E080 000040
- [ 0.000000] ACPI: APIC 0x00000000BDE9C350 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: FPDT 0x00000000BDE9C3C8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: MCFG 0x00000000BDE9C410 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
- [ 0.000000] ACPI: HPET 0x00000000BDE9C450 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
- [ 0.000000] ACPI: IVRS 0x00000000BDE9C488 000070 (v02 AMD ANNAPURN 00000001 AMD 00000000)
- [ 0.000000] ACPI: SSDT 0x00000000BDE9C4F8 000D40 (v01 AMD ANNAPURN 00000001 AMD 00000001)
- [ 0.000000] ACPI: SSDT 0x00000000BDE9D238 0004B7 (v02 AMD ANNAPURN 00000001 MSFT 04000000)
- [ 0.000000] ACPI: CRAT 0x00000000BDE9D6F0 0002F8 (v01 AMD ANNAPURN 00000001 AMD 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
- [ 0.000000] NODE_DATA(0) allocated [mem 0x23eff4000-0x23eff8fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.000000] Normal [mem 0x0000000100000000-0x000000023effffff]
- [ 0.000000] Device empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
- [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bdb19fff]
- [ 0.000000] node 0: [mem 0x00000000bdb4a000-0x00000000bde09fff]
- [ 0.000000] node 0: [mem 0x00000000bea1f000-0x00000000bea1ffff]
- [ 0.000000] node 0: [mem 0x00000000bec26000-0x00000000bf071fff]
- [ 0.000000] node 0: [mem 0x00000000bf7f3000-0x00000000bf7fffff]
- [ 0.000000] node 0: [mem 0x0000000100001000-0x000000023effffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
- [ 0.000000] On node 0 totalpages: 2085328
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 12105 pages used for memmap
- [ 0.000000] DMA32 zone: 774708 pages, LIFO batch:31
- [ 0.000000] Normal zone: 20416 pages used for memmap
- [ 0.000000] Normal zone: 1306623 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- [ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbdb1a000-0xbdb49fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbde0a000-0xbdea8fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbdea9000-0xbea1efff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbea20000-0xbec25fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbf072000-0xbf7f2fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfebfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
- [ 0.000000] e820: [mem 0xbf800000-0xfebfffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
- [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] percpu: Embedded 35 pages/cpu @ffff88023ec00000 s103640 r8192 d31528 u524288
- [ 0.000000] pcpu-alloc: s103640 r8192 d31528 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2052722
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e280983a-c2d7-4e09-b48f-66ba93290f85 rw loglevel=3 rd.systemd.show_status=false rd.udev.log-priority=3
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 8120776K/8341312K available (6346K kernel code, 1090K rwdata, 1980K rodata, 1296K init, 1032K bss, 220536K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 64.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
- [ 0.000000] NR_IRQS:8448 nr_irqs:456 16
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 3393.804 MHz processor
- [ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6790.42 BogoMIPS (lpj=11312680)
- [ 0.000022] pid_max: default: 32768 minimum: 301
- [ 0.000030] ACPI: Core revision 20160930
- [ 0.002633] ACPI: 3 ACPI AML tables successfully acquired and loaded
- [ 0.002656] Security Framework initialized
- [ 0.002656] Yama: becoming mindful.
- [ 0.003040] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.005178] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.006171] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.006179] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.006441] CPU: Physical Processor ID: 0
- [ 0.006442] CPU: Processor Core ID: 0
- [ 0.006443] mce: CPU supports 7 MCE banks
- [ 0.006452] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
- [ 0.006453] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
- [ 0.006544] Freeing SMP alternatives memory: 24K
- [ 0.009805] ftrace: allocating 25109 entries in 99 pages
- [ 0.019774] smpboot: Max logical packages: 1
- [ 0.102769] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.239689] smpboot: CPU0: AMD Athlon(tm) X4 750K Quad Core Processor (family: 0x15, model: 0x10, stepping: 0x1)
- [ 0.249778] Performance Events: Fam15h core perfctr, AMD PMU driver.
- [ 0.249790] ... version: 0
- [ 0.249791] ... bit width: 48
- [ 0.249792] ... generic registers: 6
- [ 0.249794] ... value mask: 0000ffffffffffff
- [ 0.249795] ... max period: 00007fffffffffff
- [ 0.249796] ... fixed-purpose events: 0
- [ 0.249797] ... event mask: 000000000000003f
- [ 0.273189] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.279778] smp: Bringing up secondary CPUs ...
- [ 0.306482] x86: Booting SMP configuration:
- [ 0.306483] .... node #0, CPUs: #1 #2 #3
- [ 0.611744] smp: Brought up 1 node, 4 CPUs
- [ 0.611746] smpboot: Total of 4 processors activated (27159.57 BogoMIPS)
- [ 0.612770] devtmpfs: initialized
- [ 0.612826] x86/mm: Memory block size: 128MB
- [ 0.616254] PM: Registering ACPI NVS region [mem 0xbde0a000-0xbdea8fff] (651264 bytes)
- [ 0.616263] PM: Registering ACPI NVS region [mem 0xbea20000-0xbec25fff] (2121728 bytes)
- [ 0.616371] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
- [ 0.616381] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.616436] pinctrl core: initialized pinctrl subsystem
- [ 0.616486] RTC time: 18:22:50, date: 03/11/17
- [ 0.616571] NET: Registered protocol family 16
- [ 0.628447] cpuidle: using governor ladder
- [ 0.641778] cpuidle: using governor menu
- [ 0.641782] PCCT header not found.
- [ 0.641887] ACPI: bus type PCI registered
- [ 0.641888] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.641960] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.641962] PCI: not using MMCONFIG
- [ 0.641963] PCI: Using configuration type 1 for base access
- [ 0.641963] PCI: Using configuration type 1 for extended access
- [ 0.642252] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 0.642253] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.642253] mtrr: corrected configuration.
- [ 0.658684] HugeTLB registered 1 GB page size, pre-allocated 0 pages
- [ 0.658685] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.658974] ACPI: Added _OSI(Module Device)
- [ 0.658975] ACPI: Added _OSI(Processor Device)
- [ 0.658976] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.658976] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.659113] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.662024] ACPI: Interpreter enabled
- [ 0.662040] ACPI: (supports S0 S3 S4 S5)
- [ 0.662041] ACPI: Using IOAPIC for interrupt routing
- [ 0.662064] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.662095] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.662107] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.671058] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.671063] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.671188] acpi PNP0A03:00: _OSC: platform does not support [PCIeCapability]
- [ 0.671246] acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
- [ 0.671248] acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
- [ 0.671249] acpi PNP0A03:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
- [ 0.671250] acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
- [ 0.671493] PCI host bridge to bus 0000:00
- [ 0.671495] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
- [ 0.671496] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
- [ 0.671497] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
- [ 0.671498] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 0.671499] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 0.671500] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
- [ 0.671501] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
- [ 0.671502] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.671507] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
- [ 0.671589] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
- [ 0.671680] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
- [ 0.671726] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- [ 0.671776] pci 0000:00:02.0: System wakeup disabled by ACPI
- [ 0.671811] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
- [ 0.671846] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
- [ 0.671885] pci 0000:00:04.0: System wakeup disabled by ACPI
- [ 0.671933] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
- [ 0.671946] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
- [ 0.671953] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
- [ 0.671961] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
- [ 0.671971] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
- [ 0.671978] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
- [ 0.671986] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b7ff]
- [ 0.672082] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
- [ 0.672092] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
- [ 0.672174] pci 0000:00:12.0: System wakeup disabled by ACPI
- [ 0.672210] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
- [ 0.672223] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
- [ 0.672286] pci 0000:00:12.2: supports D1 D2
- [ 0.672287] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- [ 0.672327] pci 0000:00:12.2: System wakeup disabled by ACPI
- [ 0.672364] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
- [ 0.672375] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
- [ 0.672459] pci 0000:00:13.0: System wakeup disabled by ACPI
- [ 0.672495] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
- [ 0.672508] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
- [ 0.672571] pci 0000:00:13.2: supports D1 D2
- [ 0.672572] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- [ 0.672612] pci 0000:00:13.2: System wakeup disabled by ACPI
- [ 0.672648] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
- [ 0.672765] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
- [ 0.672780] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
- [ 0.672832] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- [ 0.672868] pci 0000:00:14.2: System wakeup disabled by ACPI
- [ 0.672901] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
- [ 0.673015] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
- [ 0.673076] pci 0000:00:14.4: System wakeup disabled by ACPI
- [ 0.673106] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
- [ 0.673116] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
- [ 0.673194] pci 0000:00:14.5: System wakeup disabled by ACPI
- [ 0.673227] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
- [ 0.673237] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
- [ 0.673315] pci 0000:00:16.0: System wakeup disabled by ACPI
- [ 0.673349] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
- [ 0.673362] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
- [ 0.673424] pci 0000:00:16.2: supports D1 D2
- [ 0.673425] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
- [ 0.673462] pci 0000:00:16.2: System wakeup disabled by ACPI
- [ 0.673496] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
- [ 0.673558] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
- [ 0.673619] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
- [ 0.673681] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
- [ 0.673744] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
- [ 0.673804] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
- [ 0.673906] pci 0000:01:00.0: [1002:6610] type 00 class 0x030000
- [ 0.673918] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.673926] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea3ffff 64bit]
- [ 0.673932] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
- [ 0.673941] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
- [ 0.673976] pci 0000:01:00.0: supports D1 D2
- [ 0.673977] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
- [ 0.674028] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
- [ 0.674039] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
- [ 0.674094] pci 0000:01:00.1: supports D1 D2
- [ 0.683101] pci 0000:00:02.0: PCI bridge to [bus 01]
- [ 0.683117] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
- [ 0.683119] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
- [ 0.683121] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.683190] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.683205] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
- [ 0.683224] pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
- [ 0.683236] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
- [ 0.683307] pci 0000:02:00.0: supports D1 D2
- [ 0.683308] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.693096] pci 0000:00:04.0: PCI bridge to [bus 02]
- [ 0.693105] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
- [ 0.693119] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.693207] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
- [ 0.693214] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
- [ 0.693215] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
- [ 0.693216] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
- [ 0.693217] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
- [ 0.693218] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
- [ 0.693219] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
- [ 0.693220] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
- [ 0.693663] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
- [ 0.693713] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 *11 14 15)
- [ 0.693765] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 *10 11 14 15)
- [ 0.693817] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *5 7 10 11 14 15)
- [ 0.693858] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.693891] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.693923] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.693956] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
- [ 0.694245] pci 0000:01:00.0: vgaarb: setting as boot VGA device
- [ 0.694247] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- [ 0.694248] pci 0000:01:00.0: vgaarb: bridge control possible
- [ 0.694249] vgaarb: loaded
- [ 0.694356] PCI: Using ACPI for IRQ routing
- [ 0.701123] PCI: pci_cache_line_size set to 64 bytes
- [ 0.701165] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
- [ 0.701166] e820: reserve RAM buffer [mem 0xbdb1a000-0xbfffffff]
- [ 0.701167] e820: reserve RAM buffer [mem 0xbde0a000-0xbfffffff]
- [ 0.701168] e820: reserve RAM buffer [mem 0xbea20000-0xbfffffff]
- [ 0.701169] e820: reserve RAM buffer [mem 0xbf072000-0xbfffffff]
- [ 0.701169] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
- [ 0.701170] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
- [ 0.701251] NetLabel: Initializing
- [ 0.701252] NetLabel: domain hash size = 128
- [ 0.701252] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 0.701264] NetLabel: unlabeled traffic allowed by default
- [ 0.701331] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.701333] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
- [ 0.703438] clocksource: Switched to clocksource hpet
- [ 0.710162] VFS: Disk quotas dquot_6.6.0
- [ 0.710188] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.710284] pnp: PnP ACPI init
- [ 0.710406] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.710409] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.710480] system 00:01: [mem 0x0314cba0-0xbfffffff] could not be reserved
- [ 0.710482] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.710550] system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
- [ 0.710551] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.710669] system 00:03: [io 0x0a00-0x0a1f] has been reserved
- [ 0.710671] system 00:03: [io 0x0600-0x060f] has been reserved
- [ 0.710673] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.710848] pnp 00:04: [dma 0 disabled]
- [ 0.710883] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.710989] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.711015] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.711064] system 00:07: [io 0x04d0-0x04d1] has been reserved
- [ 0.711066] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.711286] system 00:08: [io 0x04d0-0x04d1] has been reserved
- [ 0.711287] system 00:08: [io 0x040b] has been reserved
- [ 0.711288] system 00:08: [io 0x04d6] has been reserved
- [ 0.711290] system 00:08: [io 0x0c00-0x0c01] has been reserved
- [ 0.711291] system 00:08: [io 0x0c14] has been reserved
- [ 0.711292] system 00:08: [io 0x0c50-0x0c51] has been reserved
- [ 0.711293] system 00:08: [io 0x0c52] has been reserved
- [ 0.711294] system 00:08: [io 0x0c6c] has been reserved
- [ 0.711295] system 00:08: [io 0x0c6f] has been reserved
- [ 0.711296] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
- [ 0.711297] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
- [ 0.711298] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
- [ 0.711299] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
- [ 0.711302] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
- [ 0.711303] system 00:08: [io 0x0800-0x089f] has been reserved
- [ 0.711304] system 00:08: [io 0x0b20-0x0b3f] has been reserved
- [ 0.711305] system 00:08: [io 0x0900-0x090f] has been reserved
- [ 0.711306] system 00:08: [io 0x0910-0x091f] has been reserved
- [ 0.711307] system 00:08: [io 0xfe00-0xfefe] has been reserved
- [ 0.711309] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.711310] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.711311] system 00:08: [mem 0xfed80000-0xfed8ffff] has been reserved
- [ 0.711313] system 00:08: [mem 0xfed61000-0xfed70fff] has been reserved
- [ 0.711314] system 00:08: [mem 0xfec10000-0xfec10fff] has been reserved
- [ 0.711315] system 00:08: [mem 0xfed00000-0xfed00fff] could not be reserved
- [ 0.711316] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
- [ 0.711318] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.711465] pnp: PnP ACPI: found 9 devices
- [ 0.717862] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 0.717879] pci 0000:00:02.0: PCI bridge to [bus 01]
- [ 0.717881] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
- [ 0.717883] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
- [ 0.717885] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.717888] pci 0000:00:04.0: PCI bridge to [bus 02]
- [ 0.717889] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
- [ 0.717892] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.717895] pci 0000:00:14.4: PCI bridge to [bus 03]
- [ 0.717904] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
- [ 0.717905] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
- [ 0.717906] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
- [ 0.717907] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
- [ 0.717908] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
- [ 0.717909] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
- [ 0.717910] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
- [ 0.717911] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
- [ 0.717912] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
- [ 0.717913] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.717914] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
- [ 0.717915] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.717916] pci_bus 0000:03: resource 4 [io 0x0000-0x03af window]
- [ 0.717917] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window]
- [ 0.717918] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window]
- [ 0.717919] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff window]
- [ 0.717920] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
- [ 0.717921] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff window]
- [ 0.717922] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff window]
- [ 0.717968] NET: Registered protocol family 2
- [ 0.718140] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.718309] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.718547] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.718587] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.718623] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.718695] NET: Registered protocol family 1
- [ 1.050498] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 1.050504] PCI: CLS 64 bytes, default 64
- [ 1.050547] Unpacking initramfs...
- [ 1.164488] Freeing initrd memory: 9036K
- [ 1.164752] iommu: Adding device 0000:00:02.0 to group 0
- [ 1.164792] iommu: Adding device 0000:00:04.0 to group 1
- [ 1.164830] iommu: Adding device 0000:00:11.0 to group 2
- [ 1.164879] iommu: Adding device 0000:00:12.0 to group 3
- [ 1.164890] iommu: Adding device 0000:00:12.2 to group 3
- [ 1.164936] iommu: Adding device 0000:00:13.0 to group 4
- [ 1.164948] iommu: Adding device 0000:00:13.2 to group 4
- [ 1.164997] iommu: Adding device 0000:00:14.0 to group 5
- [ 1.165009] iommu: Adding device 0000:00:14.2 to group 5
- [ 1.165020] iommu: Adding device 0000:00:14.3 to group 5
- [ 1.165059] iommu: Adding device 0000:00:14.4 to group 6
- [ 1.165099] iommu: Adding device 0000:00:14.5 to group 7
- [ 1.165146] iommu: Adding device 0000:00:16.0 to group 8
- [ 1.165160] iommu: Adding device 0000:00:16.2 to group 8
- [ 1.165222] iommu: Adding device 0000:00:18.0 to group 9
- [ 1.165234] iommu: Adding device 0000:00:18.1 to group 9
- [ 1.165247] iommu: Adding device 0000:00:18.2 to group 9
- [ 1.165260] iommu: Adding device 0000:00:18.3 to group 9
- [ 1.165273] iommu: Adding device 0000:00:18.4 to group 9
- [ 1.165285] iommu: Adding device 0000:00:18.5 to group 9
- [ 1.165294] iommu: Adding device 0000:01:00.0 to group 0
- [ 1.165302] iommu: Adding device 0000:01:00.1 to group 0
- [ 1.165312] iommu: Adding device 0000:02:00.0 to group 1
- [ 1.165768] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
- [ 1.165769] AMD-Vi: Extended features (0x800000853):
- [ 1.165770] PreF PPR GT IA
- [ 1.165771] AMD-Vi: Interrupt remapping enabled
- [ 1.165949] AMD-Vi: Lazy IO/TLB flushing enabled
- [ 1.167343] perf: AMD NB counters detected
- [ 1.167504] LVT offset 0 assigned for vector 0x400
- [ 1.167542] perf: AMD IBS detected (0x000000ff)
- [ 1.167592] Scanning for low memory corruption every 60 seconds
- [ 1.168120] Initialise system trusted keyrings
- [ 1.168307] workingset: timestamp_bits=40 max_order=21 bucket_order=0
- [ 1.169731] zbud: loaded
- [ 1.170430] Key type asymmetric registered
- [ 1.170484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 1.170523] io scheduler noop registered
- [ 1.170524] io scheduler deadline registered
- [ 1.170533] io scheduler cfq registered (default)
- [ 1.170916] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
- [ 1.170917] vesafb: scrolling: redraw
- [ 1.170918] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
- [ 1.170930] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001800000, using 8128k, total 8128k
- [ 1.197458] Console: switching to colour frame buffer device 240x67
- [ 1.223668] fb0: VESA VGA frame buffer device
- [ 1.224114] GHES: HEST is not enabled!
- [ 1.224195] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.244715] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
- [ 1.245145] Linux agpgart interface v0.103
- [ 1.245457] rtc_cmos 00:06: RTC can wake from S4
- [ 1.245575] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
- [ 1.245601] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 1.245652] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.245837] NET: Registered protocol family 10
- [ 1.248866] Segment Routing with IPv6
- [ 1.248884] NET: Registered protocol family 17
- [ 1.249159] microcode: CPU0: patch_level=0x06001119
- [ 1.249168] microcode: CPU1: patch_level=0x06001119
- [ 1.249175] microcode: CPU2: patch_level=0x06001119
- [ 1.249180] microcode: CPU3: patch_level=0x06001119
- [ 1.249218] microcode: Microcode Update Driver: v2.2.
- [ 1.249336] registered taskstats version 1
- [ 1.249343] Loading compiled-in X.509 certificates
- [ 1.249357] zswap: loaded using pool lzo/zbud
- [ 1.249634] Magic number: 9:539:392
- [ 1.249715] rtc_cmos 00:06: setting system clock to 2017-03-11 18:22:50 UTC (1489256570)
- [ 1.249768] PM: Hibernation image not present or could not be loaded.
- [ 1.250758] Freeing unused kernel memory: 1296K
- [ 1.250759] Write protecting the kernel read-only data: 10240k
- [ 1.251452] Freeing unused kernel memory: 1832K
- [ 1.251657] Freeing unused kernel memory: 68K
- [ 1.259832] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
- [ 1.261645] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 1.261688] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 1.263478] [drm] Initialized
- [ 1.263570] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 1.263585] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 1.263590] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 1.263834] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 1.263847] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 1.263851] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 1.264034] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 1.271344] [drm] radeon kernel modesetting enabled.
- [ 1.272168] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
- [ 1.272169] fb: switching to radeondrmfb from VESA VGA
- [ 1.272192] Console: switching to colour dummy device 80x25
- [ 1.272478] [drm] initializing kernel modesetting (OLAND 0x1002:0x6610 0x1787:0x2334 0x00).
- [ 1.272488] [drm] register mmio base: 0xFEA00000
- [ 1.272489] [drm] register mmio size: 262144
- [ 1.272506] radeon 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
- [ 1.272548] ATOM BIOS: C57601
- [ 1.272654] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
- [ 1.272657] radeon 0000:01:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
- [ 1.272660] [drm] Detected VRAM RAM=1024M, BAR=256M
- [ 1.272660] [drm] RAM width 128bits DDR
- [ 1.272723] [TTM] Zone kernel: Available graphics memory: 4099492 kiB
- [ 1.272725] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
- [ 1.272726] [TTM] Initializing pool allocator
- [ 1.272731] [TTM] Initializing DMA pool allocator
- [ 1.272754] [drm] radeon: 1024M of VRAM memory ready
- [ 1.272755] [drm] radeon: 2048M of GTT memory ready.
- [ 1.272774] [drm] Loading oland Microcode
- [ 1.272916] [drm] Internal thermal controller with fan control
- [ 1.273011] [drm] probing gen 2 caps for device 1022:1412 = 700d02/6
- [ 1.279284] [drm] radeon: dpm initialized
- [ 1.280232] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
- [ 1.280242] [drm] GART: num cpu pages 524288, num gpu pages 524288
- [ 1.282326] [drm] probing gen 2 caps for device 1022:1412 = 700d02/6
- [ 1.282328] [drm] PCIE gen 2 link speeds already enabled
- [ 1.293270] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
- [ 1.293378] radeon 0000:01:00.0: WB enabled
- [ 1.293379] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880231f85c00
- [ 1.293381] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880231f85c04
- [ 1.293382] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880231f85c08
- [ 1.293383] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880231f85c0c
- [ 1.293384] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880231f85c10
- [ 1.293811] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001635a18
- [ 1.394885] radeon 0000:01:00.0: failed VCE resume (-110).
- [ 1.394887] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 1.394887] [drm] Driver supports precise vblank timestamp query.
- [ 1.394888] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
- [ 1.394931] radeon 0000:01:00.0: radeon: using MSI.
- [ 1.394953] [drm] radeon: irq initialized.
- [ 1.562223] [drm] ring test on 0 succeeded in 2 usecs
- [ 1.562226] [drm] ring test on 1 succeeded in 1 usecs
- [ 1.562230] [drm] ring test on 2 succeeded in 1 usecs
- [ 1.562237] [drm] ring test on 3 succeeded in 4 usecs
- [ 1.562242] [drm] ring test on 4 succeeded in 3 usecs
- [ 1.739355] [drm] ring test on 5 succeeded in 2 usecs
- [ 1.739359] [drm] UVD initialized successfully.
- [ 1.739508] [drm] ib test on ring 0 succeeded in 0 usecs
- [ 1.739529] [drm] ib test on ring 1 succeeded in 0 usecs
- [ 1.739553] [drm] ib test on ring 2 succeeded in 0 usecs
- [ 1.739582] [drm] ib test on ring 3 succeeded in 0 usecs
- [ 1.739612] [drm] ib test on ring 4 succeeded in 0 usecs
- [ 2.176816] tsc: Refined TSC clocksource calibration: 3393.657 MHz
- [ 2.176841] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30eae700651, max_idle_ns: 440795342924 ns
- [ 2.416912] [drm] ib test on ring 5 succeeded
- [ 2.417536] [drm] Radeon Display Connectors
- [ 2.417537] [drm] Connector 0:
- [ 2.417537] [drm] HDMI-A-1
- [ 2.417538] [drm] HPD1
- [ 2.417539] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
- [ 2.417539] [drm] Encoders:
- [ 2.417540] [drm] DFP1: INTERNAL_UNIPHY
- [ 2.417540] [drm] Connector 1:
- [ 2.417541] [drm] DVI-D-1
- [ 2.417541] [drm] HPD2
- [ 2.417542] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
- [ 2.417542] [drm] Encoders:
- [ 2.417542] [drm] DFP2: INTERNAL_UNIPHY
- [ 2.417543] [drm] Connector 2:
- [ 2.417543] [drm] VGA-1
- [ 2.417544] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
- [ 2.417544] [drm] Encoders:
- [ 2.417545] [drm] CRT1: INTERNAL_KLDSCP_DAC1
- [ 2.456237] [drm] fb mappable at 0xC05D8000
- [ 2.456238] [drm] vram apper at 0xC0000000
- [ 2.456238] [drm] size 8294400
- [ 2.456239] [drm] fb depth is 24
- [ 2.456239] [drm] pitch is 7680
- [ 2.456307] fbcon: radeondrmfb (fb0) is primary device
- [ 2.467192] Console: switching to colour frame buffer device 240x67
- [ 2.470693] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
- [ 2.496861] [drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 0
- [ 2.525804] i8042: PNP: No PS/2 controller found.
- [ 2.532576] SCSI subsystem initialized
- [ 2.533151] ACPI: bus type USB registered
- [ 2.533178] usbcore: registered new interface driver usbfs
- [ 2.533189] usbcore: registered new interface driver hub
- [ 2.533223] usbcore: registered new device driver usb
- [ 2.533700] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.533921] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.533922] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
- [ 2.534298] ehci-pci: EHCI PCI platform driver
- [ 2.534517] QUIRK: Enable AMD PLL fix
- [ 2.534546] ehci-pci 0000:00:12.2: EHCI Host Controller
- [ 2.534553] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 2.534560] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 2.534570] ehci-pci 0000:00:12.2: debug port 1
- [ 2.534622] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
- [ 2.535438] libata version 3.00 loaded.
- [ 2.546787] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 2.546987] hub 1-0:1.0: USB hub found
- [ 2.546993] hub 1-0:1.0: 5 ports detected
- [ 2.547355] ehci-pci 0000:00:13.2: EHCI Host Controller
- [ 2.547360] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
- [ 2.547363] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 2.547373] ehci-pci 0000:00:13.2: debug port 1
- [ 2.547410] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000
- [ 2.560154] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 2.560355] hub 2-0:1.0: USB hub found
- [ 2.560361] hub 2-0:1.0: 5 ports detected
- [ 2.560530] ahci 0000:00:11.0: version 3.0
- [ 2.560829] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
- [ 2.560831] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
- [ 2.560834] ahci 0000:00:11.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
- [ 2.561691] scsi host0: ahci
- [ 2.561811] scsi host1: ahci
- [ 2.561920] scsi host2: ahci
- [ 2.562057] scsi host3: ahci
- [ 2.562161] scsi host4: ahci
- [ 2.562267] scsi host5: ahci
- [ 2.562319] ata1: SATA max UDMA/133 abar m2048@0xfeb0b000 port 0xfeb0b100 irq 26
- [ 2.562321] ata2: SATA max UDMA/133 abar m2048@0xfeb0b000 port 0xfeb0b180 irq 27
- [ 2.562322] ata3: SATA max UDMA/133 abar m2048@0xfeb0b000 port 0xfeb0b200 irq 28
- [ 2.562324] ata4: SATA max UDMA/133 abar m2048@0xfeb0b000 port 0xfeb0b280 irq 29
- [ 2.562325] ata5: SATA max UDMA/133 abar m2048@0xfeb0b000 port 0xfeb0b300 irq 30
- [ 2.562327] ata6: SATA max UDMA/133 abar m2048@0xfeb0b000 port 0xfeb0b380 irq 31
- [ 2.562450] ehci-pci 0000:00:16.2: EHCI Host Controller
- [ 2.562456] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
- [ 2.562459] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 2.562467] ehci-pci 0000:00:16.2: debug port 1
- [ 2.562504] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000
- [ 2.573470] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
- [ 2.573722] hub 3-0:1.0: USB hub found
- [ 2.573729] hub 3-0:1.0: 4 ports detected
- [ 2.574241] ohci-pci: OHCI PCI platform driver
- [ 2.574412] ohci-pci 0000:00:12.0: OHCI PCI host controller
- [ 2.574419] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
- [ 2.574456] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
- [ 2.634438] hub 4-0:1.0: USB hub found
- [ 2.634447] hub 4-0:1.0: 5 ports detected
- [ 2.634720] ohci-pci 0000:00:13.0: OHCI PCI host controller
- [ 2.634725] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
- [ 2.634748] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000
- [ 2.694431] hub 5-0:1.0: USB hub found
- [ 2.694439] hub 5-0:1.0: 5 ports detected
- [ 2.694719] ohci-pci 0000:00:14.5: OHCI PCI host controller
- [ 2.694724] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
- [ 2.694749] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
- [ 2.754411] hub 6-0:1.0: USB hub found
- [ 2.754419] hub 6-0:1.0: 2 ports detected
- [ 2.754647] ohci-pci 0000:00:16.0: OHCI PCI host controller
- [ 2.754652] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
- [ 2.754676] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000
- [ 2.814471] hub 7-0:1.0: USB hub found
- [ 2.814480] hub 7-0:1.0: 4 ports detected
- [ 2.866787] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 2.878206] ata6: SATA link down (SStatus 0 SControl 300)
- [ 2.878288] ata5: SATA link down (SStatus 0 SControl 300)
- [ 2.878311] ata4: SATA link down (SStatus 0 SControl 300)
- [ 3.036799] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 3.036826] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.036846] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 3.038035] ata1.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133
- [ 3.038037] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 3.038931] ata1.00: configured for UDMA/133
- [ 3.039038] ata2.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
- [ 3.039040] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 3.039056] ata3.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
- [ 3.039270] scsi 0:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5
- [ 3.039980] ata3.00: configured for UDMA/100
- [ 3.040098] usb 5-3: new low-speed USB device number 2 using ohci-pci
- [ 3.041348] ata2.00: configured for UDMA/133
- [ 3.077181] scsi 1:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 0A80 PQ: 0 ANSI: 5
- [ 3.121870] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB01 PQ: 0 ANSI: 5
- [ 3.136249] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
- [ 3.136265] sd 1:0:0:0: [sdb] Write Protect is off
- [ 3.136267] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 3.136273] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
- [ 3.136274] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 3.136286] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.136288] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.136288] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 3.136308] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.148046] sdb: sdb1
- [ 3.148475] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 3.150317] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 3.150319] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 3.150493] sr 2:0:0:0: Attached scsi CD-ROM sr0
- [ 3.190215] clocksource: Switched to clocksource tsc
- [ 3.195192] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
- [ 3.195765] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.220459] hidraw: raw HID events driver (C) Jiri Kosina
- [ 3.230329] usbcore: registered new interface driver usbhid
- [ 3.230331] usbhid: USB HID core driver
- [ 3.230972] input: USB USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/0003:1A2C:0C23.0001/input/input0
- [ 3.290163] hid-generic 0003:1A2C:0C23.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:13.0-3/input0
- [ 3.292256] input: USB USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/0003:1A2C:0C23.0002/input/input1
- [ 3.346894] hid-generic 0003:1A2C:0C23.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keyboard] on usb-0000:00:13.0-3/input1
- [ 3.406763] usb 4-5: new full-speed USB device number 2 using ohci-pci
- [ 3.443576] random: fast init done
- [ 3.595521] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/0003:046D:C52F.0003/input/input2
- [ 3.595582] hid-generic 0003:046D:C52F.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-5/input0
- [ 3.603403] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/0003:046D:C52F.0004/input/input3
- [ 3.660348] hid-generic 0003:046D:C52F.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-5/input1
- [ 3.955403] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.788897] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 4.824001] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
- [ 4.824128] systemd[1]: Detected architecture x86-64.
- [ 4.852246] systemd[1]: Set hostname to <desktop>.
- [ 4.970571] random: crng init done
- [ 5.472706] systemd[1]: Listening on Device-mapper event daemon FIFOs.
- [ 5.472834] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 5.472918] systemd[1]: Listening on udev Kernel Socket.
- [ 5.472982] systemd[1]: Listening on udev Control Socket.
- [ 5.473350] systemd[1]: Created slice System Slice.
- [ 5.473474] systemd[1]: Created slice system-getty.slice.
- [ 5.473549] systemd[1]: Listening on Journal Socket.
- [ 5.695169] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 5.695204] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 5.695235] sr 2:0:0:0: Attached scsi generic sg2 type 5
- [ 5.822075] EXT4-fs (sda5): re-mounted. Opts: data=ordered
- [ 7.193485] acpi_cpufreq: overriding BIOS provided _PSD data
- [ 7.284382] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
- [ 7.284389] ACPI: Power Button [PWRB]
- [ 7.284530] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
- [ 7.284534] ACPI: Power Button [PWRF]
- [ 7.320529] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 7.404188] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
- [ 7.441898] wmi: Mapper loaded
- [ 7.461985] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
- [ 7.461989] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
- [ 7.462213] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
- [ 7.576136] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 7.576156] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
- [ 7.576933] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000d81000, d4:3d:7e:f9:3c:83, XID 0c900800 IRQ 34
- [ 7.576937] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 7.586562] i8042: PNP: No PS/2 controller found.
- [ 7.896337] input: PC Speaker as /devices/platform/pcspkr/input/input6
- [ 7.913598] [drm] amdgpu kernel modesetting enabled.
- [ 7.922684] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
- [ 7.922687] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
- [ 7.975884] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
- [ 8.234135] AVX version of gcm_enc/dec engaged.
- [ 8.234137] AES CTR mode by8 optimization enabled
- [ 8.238686] ppdev: user-space parallel port driver
- [ 8.365649] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
- [ 8.365654] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 8.365657] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
- [ 8.365660] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
- [ 8.365662] snd_hda_codec_realtek hdaudioC0D0: inputs:
- [ 8.365666] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
- [ 8.365669] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
- [ 8.365671] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
- [ 8.383971] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
- [ 8.384058] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
- [ 8.384139] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
- [ 8.384225] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
- [ 8.384309] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
- [ 8.656244] r8169 0000:02:00.0 enp2s0: renamed from eth0
- [ 8.766064] kvm: Nested Virtualization enabled
- [ 8.766068] kvm: Nested Paging enabled
- [ 8.781905] EDAC MC: Ver: 3.0.0
- [ 8.903750] fuse init (API version 7.26)
- [ 8.988059] MCE: In-kernel MCE decoding enabled.
- [ 8.994173] mousedev: PS/2 mouse device common for all mice
- [ 9.047123] EDAC amd64: DRAM ECC disabled.
- [ 9.047126] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 9.097260] EDAC amd64: DRAM ECC disabled.
- [ 9.097264] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 9.130614] EDAC amd64: DRAM ECC disabled.
- [ 9.130618] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [ 9.194309] Adding 2409172k swap on /dev/sda6. Priority:-1 extents:1 across:2409172k FS
- [ 9.719819] usb 1-1: reset high-speed USB device number 2 using ehci-pci
- [ 9.868883] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
- [ 9.898981] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
- [ 9.901041] systemd[1]: Starting Load/Save RF Kill Switch Status...
- [ 9.975987] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 9.976666] usbcore: registered new interface driver rt2800usb
- [ 10.034104] systemd[1]: Started Load/Save RF Kill Switch Status.
- [ 10.102289] systemd[1]: Mounted /fajlovi.
- [ 10.104945] systemd[1]: Reached target Local File Systems.
- [ 10.108468] systemd[1]: Starting Rebuild Journal Catalog...
- [ 10.112156] systemd[1]: Starting Rebuild Dynamic Linker Cache...
- [ 10.130867] rt2800usb 1-1:1.0 wlp0s18f2u1: renamed from wlan0
- [ 10.294588] systemd[1]: Started Rebuild Journal Catalog.
- [ 12.042443] systemd[1]: Started Rebuild Dynamic Linker Cache.
- [ 12.046150] systemd[1]: Starting Update is Completed...
- [ 12.175311] systemd[1]: Started Update is Completed.
- [ 14.332139] systemd-journald[209]: Received request to flush runtime journal from PID 1
- [ 26.291895] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 26.447840] r8169 0000:02:00.0 enp2s0: link down
- [ 26.447901] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 26.453463] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 26.453505] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
- [ 26.497430] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
- [ 26.781182] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 27.629280] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 28.335204] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 36.850664] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 38.311089] wlp0s18f2u1: authenticate with a0:f3:c1:62:60:40
- [ 38.360772] wlp0s18f2u1: send auth to a0:f3:c1:62:60:40 (try 1/3)
- [ 38.362745] wlp0s18f2u1: authenticated
- [ 38.365239] wlp0s18f2u1: associate with a0:f3:c1:62:60:40 (try 1/3)
- [ 38.369029] wlp0s18f2u1: RX AssocResp from a0:f3:c1:62:60:40 (capab=0x431 status=0 aid=3)
- [ 38.377220] wlp0s18f2u1: associated
- [ 38.377284] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s18f2u1: link becomes ready
- [ 336.834546] usb usb1-port1: disabled by hub (EMI?), re-enabling...
- [ 336.834554] usb 1-1: USB disconnect, device number 2
- [ 336.858898] wlp0s18f2u1: deauthenticating from a0:f3:c1:62:60:40 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 337.162196] usb 1-1: new high-speed USB device number 4 using ehci-pci
- [ 337.323782] usb 1-1: device descriptor read/all, error -71
- [ 337.442187] usb 1-1: new high-speed USB device number 5 using ehci-pci
- [ 337.982240] usb 1-1: device not accepting address 5, error -71
- [ 338.095472] usb 1-1: new high-speed USB device number 6 using ehci-pci
- [ 338.258816] usb 1-1: reset high-speed USB device number 6 using ehci-pci
- [ 338.395551] usb 1-1: device descriptor read/64, error -71
- [ 338.638868] usb 1-1: device descriptor read/64, error -71
- [ 338.858836] usb 1-1: reset high-speed USB device number 6 using ehci-pci
- [ 338.995526] usb 1-1: device descriptor read/64, error -71
- [ 339.238775] usb 1-1: device descriptor read/64, error -71
- [ 339.458834] usb 1-1: reset high-speed USB device number 6 using ehci-pci
- [ 339.885488] usb 1-1: device not accepting address 6, error -71
- [ 339.998827] usb 1-1: reset high-speed USB device number 6 using ehci-pci
- [ 340.034361] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
- [ 340.063724] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 5370 detected
- [ 340.064270] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- [ 340.080737] rt2800usb 1-1:1.0 wlp0s18f2u1: renamed from wlan0
- [ 340.099463] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 340.099533] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
- [ 340.099578] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
- [ 340.121669] usb usb1-port1: disabled by hub (EMI?), re-enabling...
- [ 340.121674] usb 1-1: USB disconnect, device number 6
- [ 341.128652] ieee80211 phy1: rt2800_load_firmware: Error - PBF system register not ready
- [ 341.428757] usb 1-1: new high-speed USB device number 7 using ehci-pci
- [ 341.705408] usb 1-1: reset high-speed USB device number 7 using ehci-pci
- [ 341.853180] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
- [ 341.885339] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 5370 detected
- [ 341.885904] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
- [ 341.905605] rt2800usb 1-1:1.0 wlp0s18f2u1: renamed from wlan0
- [ 341.930955] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 341.931073] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
- [ 341.931143] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
- [ 342.211038] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 343.066654] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 343.124708] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 345.400099] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 346.850825] wlp0s18f2u1: authenticate with a0:f3:c1:62:60:40
- [ 346.900941] wlp0s18f2u1: send auth to a0:f3:c1:62:60:40 (try 1/3)
- [ 346.903635] wlp0s18f2u1: authenticated
- [ 346.905122] wlp0s18f2u1: associate with a0:f3:c1:62:60:40 (try 1/3)
- [ 346.909185] wlp0s18f2u1: RX AssocResp from a0:f3:c1:62:60:40 (capab=0x431 status=0 aid=3)
- [ 346.916712] wlp0s18f2u1: associated
- [ 346.916799] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s18f2u1: link becomes ready
- [ 636.232592] usb usb1-port1: disabled by hub (EMI?), re-enabling...
- [ 636.232600] usb 1-1: USB disconnect, device number 7
- [ 636.282641] wlp0s18f2u1: deauthenticating from a0:f3:c1:62:60:40 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 636.595863] usb 1-1: new high-speed USB device number 8 using ehci-pci
- [ 636.732583] usb 1-1: device descriptor read/64, error -71
- [ 636.975911] usb 1-1: device descriptor read/64, error -71
- [ 637.195893] usb 1-1: new high-speed USB device number 9 using ehci-pci
- [ 637.739203] usb 1-1: device not accepting address 9, error -71
- [ 637.852528] usb 1-1: new high-speed USB device number 10 using ehci-pci
- [ 638.015863] usb 1-1: reset high-speed USB device number 10 using ehci-pci
- [ 638.152426] usb 1-1: device descriptor read/64, error -71
- [ 638.395843] usb 1-1: device descriptor read/64, error -71
- [ 638.615833] usb 1-1: reset high-speed USB device number 10 using ehci-pci
- [ 638.763756] ieee80211 phy3: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
- [ 638.796859] ieee80211 phy3: rt2x00_set_rf: Info - RF chipset 5370 detected
- [ 638.797395] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht'
- [ 638.814044] rt2800usb 1-1:1.0 wlp0s18f2u1: renamed from wlan0
- [ 638.827508] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 638.827559] ieee80211 phy3: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
- [ 638.827597] ieee80211 phy3: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
- [ 638.887404] usb usb1-port1: disabled by hub (EMI?), re-enabling...
- [ 638.887412] usb 1-1: USB disconnect, device number 10
- [ 638.895754] ieee80211 phy3: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x6848 with error -19
- [ 638.925733] ieee80211 phy3: rt2800_wait_bbp_ready: Error - BBP register access failed, aborting
- [ 638.925742] ieee80211 phy3: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5)
- [ 639.235812] usb 1-1: new high-speed USB device number 11 using ehci-pci
- [ 639.397470] usb 1-1: device descriptor read/all, error -71
- [ 639.515801] usb 1-1: new high-speed USB device number 12 using ehci-pci
- [ 640.055774] usb 1-1: device not accepting address 12, error -71
- [ 640.169024] usb 1-1: new high-speed USB device number 13 using ehci-pci
- [ 640.332430] usb 1-1: reset high-speed USB device number 13 using ehci-pci
- [ 640.480325] ieee80211 phy4: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
- [ 640.514179] ieee80211 phy4: rt2x00_set_rf: Info - RF chipset 5370 detected
- [ 640.514784] ieee80211 phy4: Selected rate control algorithm 'minstrel_ht'
- [ 640.532076] rt2800usb 1-1:1.0 wlp0s18f2u1: renamed from wlan0
- [ 640.558195] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 640.558245] ieee80211 phy4: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
- [ 640.558286] ieee80211 phy4: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
- [ 640.829584] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 641.683676] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 641.731408] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 644.029891] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 645.444629] wlp0s18f2u1: authenticate with a0:f3:c1:62:60:40
- [ 645.501250] wlp0s18f2u1: send auth to a0:f3:c1:62:60:40 (try 1/3)
- [ 645.504904] wlp0s18f2u1: authenticated
- [ 645.505496] wlp0s18f2u1: associate with a0:f3:c1:62:60:40 (try 1/3)
- [ 645.509407] wlp0s18f2u1: RX AssocResp from a0:f3:c1:62:60:40 (capab=0x431 status=0 aid=3)
- [ 645.517186] wlp0s18f2u1: associated
- [ 645.517255] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s18f2u1: link becomes ready
- [ 1029.074768] usb usb1-port1: disabled by hub (EMI?), re-enabling...
- [ 1029.074775] usb 1-1: USB disconnect, device number 13
- [ 1029.095553] wlp0s18f2u1: deauthenticating from a0:f3:c1:62:60:40 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 1029.395514] usb 1-1: new high-speed USB device number 14 using ehci-pci
- [ 1029.935489] usb 1-1: device not accepting address 14, error -71
- [ 1030.048813] usb 1-1: new high-speed USB device number 15 using ehci-pci
- [ 1030.185489] usb 1-1: device descriptor read/64, error -71
- [ 1030.428802] usb 1-1: device descriptor read/64, error -71
- [ 1030.648751] usb 1-1: new high-speed USB device number 16 using ehci-pci
- [ 1030.812122] usb 1-1: reset high-speed USB device number 16 using ehci-pci
- [ 1031.352092] usb 1-1: device not accepting address 16, error -71
- [ 1031.465434] usb 1-1: reset high-speed USB device number 16 using ehci-pci
- [ 1031.602085] usb 1-1: device descriptor read/64, error -71
- [ 1031.845405] usb 1-1: device descriptor read/64, error -71
- [ 1032.065396] usb 1-1: reset high-speed USB device number 16 using ehci-pci
- [ 1032.101053] ieee80211 phy5: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
- [ 1032.135478] ieee80211 phy5: rt2x00_set_rf: Info - RF chipset 5370 detected
- [ 1032.136061] ieee80211 phy5: Selected rate control algorithm 'minstrel_ht'
- [ 1032.144518] usb usb1-port1: disabled by hub (EMI?), re-enabling...
- [ 1032.144526] usb 1-1: USB disconnect, device number 16
- [ 1032.465381] usb 1-1: new high-speed USB device number 17 using ehci-pci
- [ 1032.672659] usb 1-1: can't set config #1, error -71
- [ 1032.672842] usb usb1-port1: disabled by hub (EMI?), re-enabling...
- [ 1032.672847] usb 1-1: USB disconnect, device number 17
- [ 1032.932029] usb 1-1: new high-speed USB device number 18 using ehci-pci
- [ 1033.208683] usb 1-1: reset high-speed USB device number 18 using ehci-pci
- [ 1033.356641] ieee80211 phy6: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
- [ 1033.392752] ieee80211 phy6: rt2x00_set_rf: Info - RF chipset 5370 detected
- [ 1033.393370] ieee80211 phy6: Selected rate control algorithm 'minstrel_ht'
- [ 1033.414520] rt2800usb 1-1:1.0 wlp0s18f2u1: renamed from wlan0
- [ 1033.437444] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 1033.437536] ieee80211 phy6: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
- [ 1033.437586] ieee80211 phy6: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
- [ 1033.690070] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 1034.421998] usb usb1-port1: disabled by hub (EMI?), re-enabling...
- [ 1034.422005] usb 1-1: USB disconnect, device number 18
- [ 1034.429966] ieee80211 phy6: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x1da0 with error -19
- [ 1034.458746] ieee80211 phy6: rt2800_wait_bbp_ready: Error - BBP register access failed, aborting
- [ 1034.458753] ieee80211 phy6: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5)
- [ 1034.768619] usb 1-1: new high-speed USB device number 19 using ehci-pci
- [ 1035.045266] usb 1-1: reset high-speed USB device number 19 using ehci-pci
- [ 1035.196330] ieee80211 phy7: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
- [ 1035.230811] ieee80211 phy7: rt2x00_set_rf: Info - RF chipset 5370 detected
- [ 1035.231385] ieee80211 phy7: Selected rate control algorithm 'minstrel_ht'
- [ 1035.247032] rt2800usb 1-1:1.0 wlp0s18f2u1: renamed from wlan0
- [ 1035.269513] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 1035.269565] ieee80211 phy7: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
- [ 1035.269591] ieee80211 phy7: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
- [ 1035.527555] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 1036.397301] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 1036.454157] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 1038.817811] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 1040.233299] wlp0s18f2u1: authenticate with a0:f3:c1:62:60:40
- [ 1040.283658] wlp0s18f2u1: send auth to a0:f3:c1:62:60:40 (try 1/3)
- [ 1040.285897] wlp0s18f2u1: authenticated
- [ 1040.288362] wlp0s18f2u1: associate with a0:f3:c1:62:60:40 (try 1/3)
- [ 1040.292222] wlp0s18f2u1: RX AssocResp from a0:f3:c1:62:60:40 (capab=0x431 status=0 aid=3)
- [ 1040.298917] wlp0s18f2u1: associated
- [ 1040.298992] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s18f2u1: link becomes ready
- [ 2638.500880] Chrome_ChildThr[4273]: segfault at 0 ip 0000559afb121da1 sp 00007fca03afe380 error 6 in plugin-container[559afb11d000+1a000]
- [ 2652.216321] usb usb1-port1: disabled by hub (EMI?), re-enabling...
- [ 2652.216329] usb 1-1: USB disconnect, device number 19
- [ 2652.231599] wlp0s18f2u1: deauthenticating from a0:f3:c1:62:60:40 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 2652.544856] usb 1-1: new high-speed USB device number 20 using ehci-pci
- [ 2652.821599] usb 1-1: reset high-speed USB device number 20 using ehci-pci
- [ 2652.958254] usb 1-1: device descriptor read/64, error -71
- [ 2653.201576] usb 1-1: device descriptor read/64, error -71
- [ 2653.421574] usb 1-1: reset high-speed USB device number 20 using ehci-pci
- [ 2653.961548] usb 1-1: device not accepting address 20, error -71
- [ 2654.074798] usb 1-1: reset high-speed USB device number 20 using ehci-pci
- [ 2654.110367] ieee80211 phy8: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
- [ 2654.142478] ieee80211 phy8: rt2x00_set_rf: Info - RF chipset 5370 detected
- [ 2654.143189] ieee80211 phy8: Selected rate control algorithm 'minstrel_ht'
- [ 2654.160678] rt2800usb 1-1:1.0 wlp0s18f2u1: renamed from wlan0
- [ 2654.180622] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2654.180671] ieee80211 phy8: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
- [ 2654.180706] ieee80211 phy8: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
- [ 2654.211117] usb usb1-port1: disabled by hub (EMI?), re-enabling...
- [ 2654.211121] usb 1-1: USB disconnect, device number 20
- [ 2655.231415] ieee80211 phy8: rt2800_wait_csr_ready: Error - Unstable hardware
- [ 2655.231423] ieee80211 phy8: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5)
- [ 2655.558145] usb 1-1: new high-speed USB device number 21 using ehci-pci
- [ 2656.098122] usb 1-1: device not accepting address 21, error -71
- [ 2656.211413] usb 1-1: new high-speed USB device number 22 using ehci-pci
- [ 2656.488107] usb 1-1: reset high-speed USB device number 22 using ehci-pci
- [ 2656.635921] ieee80211 phy9: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
- [ 2656.667410] ieee80211 phy9: rt2x00_set_rf: Info - RF chipset 5370 detected
- [ 2656.668033] ieee80211 phy9: Selected rate control algorithm 'minstrel_ht'
- [ 2656.686723] rt2800usb 1-1:1.0 wlp0s18f2u1: renamed from wlan0
- [ 2656.708279] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2656.708331] ieee80211 phy9: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
- [ 2656.708363] ieee80211 phy9: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
- [ 2656.972918] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2657.829397] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2657.894741] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2658.079346] usb usb1-port1: disabled by hub (EMI?), re-enabling...
- [ 2658.079354] usb 1-1: USB disconnect, device number 22
- [ 2658.087443] ieee80211 phy9: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x101c with error -19
- [ 2658.404692] usb 1-1: new high-speed USB device number 23 using ehci-pci
- [ 2658.681342] usb 1-1: reset high-speed USB device number 23 using ehci-pci
- [ 2658.829042] ieee80211 phy10: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
- [ 2658.859645] ieee80211 phy10: rt2x00_set_rf: Info - RF chipset 5370 detected
- [ 2658.860322] ieee80211 phy10: Selected rate control algorithm 'minstrel_ht'
- [ 2658.883750] rt2800usb 1-1:1.0 wlp0s18f2u1: renamed from wlan0
- [ 2658.901535] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2658.901587] ieee80211 phy10: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
- [ 2658.901623] ieee80211 phy10: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
- [ 2659.155167] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2660.018397] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2660.088098] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2662.385963] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2663.813755] wlp0s18f2u1: authenticate with a0:f3:c1:62:60:40
- [ 2663.863326] wlp0s18f2u1: send auth to a0:f3:c1:62:60:40 (try 1/3)
- [ 2663.865578] wlp0s18f2u1: authenticated
- [ 2663.871107] wlp0s18f2u1: associate with a0:f3:c1:62:60:40 (try 1/3)
- [ 2663.874889] wlp0s18f2u1: RX AssocResp from a0:f3:c1:62:60:40 (capab=0x431 status=0 aid=3)
- [ 2663.882979] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s18f2u1: link becomes ready
- [ 2663.883057] wlp0s18f2u1: associated
- [ 2682.674111] Chrome_ChildThr[4393]: segfault at 0 ip 000056392a5afda1 sp 00007f82c2bfe380 error 6 in plugin-container[56392a5ab000+1a000]
- [ 2733.900945] usb usb1-port1: disabled by hub (EMI?), re-enabling...
- [ 2733.900953] usb 1-1: USB disconnect, device number 23
- [ 2733.921441] wlp0s18f2u1: deauthenticating from a0:f3:c1:62:60:40 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 2734.231393] usb 1-1: new high-speed USB device number 24 using ehci-pci
- [ 2734.368054] usb 1-1: device descriptor read/64, error -71
- [ 2734.611375] usb 1-1: device descriptor read/64, error -71
- [ 2734.831375] usb 1-1: new high-speed USB device number 25 using ehci-pci
- [ 2734.968033] usb 1-1: device descriptor read/64, error -71
- [ 2735.211351] usb 1-1: device descriptor read/64, error -71
- [ 2735.431355] usb 1-1: new high-speed USB device number 26 using ehci-pci
- [ 2735.857991] usb 1-1: device not accepting address 26, error -71
- [ 2735.971314] usb 1-1: new high-speed USB device number 27 using ehci-pci
- [ 2736.134648] usb 1-1: reset high-speed USB device number 27 using ehci-pci
- [ 2736.271259] usb 1-1: device descriptor read/64, error -71
- [ 2736.514628] usb 1-1: device descriptor read/64, error -71
- [ 2736.734619] usb 1-1: reset high-speed USB device number 27 using ehci-pci
- [ 2737.274593] usb 1-1: device not accepting address 27, error -71
- [ 2737.387918] usb 1-1: reset high-speed USB device number 27 using ehci-pci
- [ 2737.423448] ieee80211 phy11: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
- [ 2737.456812] ieee80211 phy11: rt2x00_set_rf: Info - RF chipset 5370 detected
- [ 2737.457347] ieee80211 phy11: Selected rate control algorithm 'minstrel_ht'
- [ 2737.476452] rt2800usb 1-1:1.0 wlp0s18f2u1: renamed from wlan0
- [ 2737.498677] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2737.498746] ieee80211 phy11: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
- [ 2737.498792] ieee80211 phy11: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
- [ 2737.515705] usb usb1-port1: disabled by hub (EMI?), re-enabling...
- [ 2737.515710] usb 1-1: USB disconnect, device number 27
- [ 2738.524538] ieee80211 phy11: rt2800_load_firmware: Error - PBF system register not ready
- [ 2738.837857] usb 1-1: new high-speed USB device number 28 using ehci-pci
- [ 2739.114519] usb 1-1: reset high-speed USB device number 28 using ehci-pci
- [ 2739.262376] ieee80211 phy12: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
- [ 2739.297360] ieee80211 phy12: rt2x00_set_rf: Info - RF chipset 5370 detected
- [ 2739.298031] ieee80211 phy12: Selected rate control algorithm 'minstrel_ht'
- [ 2739.315622] rt2800usb 1-1:1.0 wlp0s18f2u1: renamed from wlan0
- [ 2739.338599] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2739.338652] ieee80211 phy12: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
- [ 2739.338687] ieee80211 phy12: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
- [ 2739.591744] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2740.397317] usb usb1-port1: disabled by hub (EMI?), re-enabling...
- [ 2740.397322] usb 1-1: USB disconnect, device number 28
- [ 2740.406132] ieee80211 phy12: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x101c with error -19
- [ 2740.414710] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2740.754408] usb 1-1: new high-speed USB device number 29 using ehci-pci
- [ 2741.031100] usb 1-1: reset high-speed USB device number 29 using ehci-pci
- [ 2741.182177] ieee80211 phy13: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
- [ 2741.216089] ieee80211 phy13: rt2x00_set_rf: Info - RF chipset 5370 detected
- [ 2741.216716] ieee80211 phy13: Selected rate control algorithm 'minstrel_ht'
- [ 2741.236810] rt2800usb 1-1:1.0 wlp0s18f2u1: renamed from wlan0
- [ 2741.256069] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2741.256126] ieee80211 phy13: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
- [ 2741.256156] ieee80211 phy13: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
- [ 2741.508428] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2742.403129] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2742.463615] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2744.742658] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 2746.159367] wlp0s18f2u1: authenticate with a0:f3:c1:62:60:40
- [ 2746.210260] wlp0s18f2u1: send auth to a0:f3:c1:62:60:40 (try 1/3)
- [ 2746.212492] wlp0s18f2u1: authenticated
- [ 2746.214115] wlp0s18f2u1: associate with a0:f3:c1:62:60:40 (try 1/3)
- [ 2746.218013] wlp0s18f2u1: RX AssocResp from a0:f3:c1:62:60:40 (capab=0x431 status=0 aid=3)
- [ 2746.225648] wlp0s18f2u1: associated
- [ 2746.225716] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s18f2u1: link becomes ready
- [ 3049.878675] usb usb1-port1: disabled by hub (EMI?), re-enabling...
- [ 3049.878683] usb 1-1: USB disconnect, device number 29
- [ 3049.901007] wlp0s18f2u1: deauthenticating from a0:f3:c1:62:60:40 by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 3050.204264] usb 1-1: new high-speed USB device number 30 using ehci-pci
- [ 3050.480978] usb 1-1: reset high-speed USB device number 30 using ehci-pci
- [ 3050.617634] usb 1-1: device descriptor read/64, error -71
- [ 3050.860956] usb 1-1: device descriptor read/64, error -71
- [ 3051.080920] usb 1-1: reset high-speed USB device number 30 using ehci-pci
- [ 3051.217606] usb 1-1: device descriptor read/64, error -71
- [ 3051.472020] ieee80211 phy14: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
- [ 3051.504153] ieee80211 phy14: rt2x00_set_rf: Info - RF chipset 5370 detected
- [ 3051.504793] ieee80211 phy14: Selected rate control algorithm 'minstrel_ht'
- [ 3051.521249] rt2800usb 1-1:1.0 wlp0s18f2u1: renamed from wlan0
- [ 3051.537711] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 3051.537764] ieee80211 phy14: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
- [ 3051.537792] ieee80211 phy14: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
- [ 3051.805829] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 3052.662869] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 3052.720537] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 3054.986214] IPv6: ADDRCONF(NETDEV_UP): wlp0s18f2u1: link is not ready
- [ 3056.396475] wlp0s18f2u1: authenticate with a0:f3:c1:62:60:40
- [ 3056.446195] wlp0s18f2u1: send auth to a0:f3:c1:62:60:40 (try 1/3)
- [ 3056.448412] wlp0s18f2u1: authenticated
- [ 3056.450710] wlp0s18f2u1: associate with a0:f3:c1:62:60:40 (try 1/3)
- [ 3056.454545] wlp0s18f2u1: RX AssocResp from a0:f3:c1:62:60:40 (capab=0x431 status=0 aid=3)
- [ 3056.461524] wlp0s18f2u1: associated
- [ 3056.461604] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s18f2u1: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement