Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Examining /dev/disk0
- smartctl 6.2 2013-07-26 r3841 [x86_64-apple-darwin10.8.0] (local build)
- Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Crucial/Micron RealSSD m4/C400/P400
- Device Model: M4-CT512M4SSD2
- Serial Number: 000000001145031R8P55
- LU WWN Device Id: 5 00a075 1031e8c55
- Firmware Version: 040H
- User Capacity: 512,110,190,592 bytes [512 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sat Feb 8 20:14:49 2014 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 2380) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 39) minutes.
- Conveyance self-test routine
- recommended polling time: ( 3) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 9 Power_On_Hours 0x0032 100 100 001 Old_age Always - 2370
- 12 Power_Cycle_Count 0x0032 100 100 001 Old_age Always - 3956
- 170 Grown_Failing_Block_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 171 Program_Fail_Count 0x0032 100 100 001 Old_age Always - 0
- 172 Erase_Fail_Count 0x0032 100 100 001 Old_age Always - 0
- 173 Wear_Leveling_Count 0x0033 098 098 010 Pre-fail Always - 74
- 174 Unexpect_Power_Loss_Ct 0x0032 100 100 001 Old_age Always - 15
- 181 Non4k_Aligned_Access 0x0022 100 100 001 Old_age Always - 778 728 49
- 183 SATA_Iface_Downshift 0x0032 100 100 001 Old_age Always - 0
- 184 End-to-End_Error 0x0033 100 100 050 Pre-fail Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 001 Old_age Always - 0
- 188 Command_Timeout 0x0032 100 100 001 Old_age Always - 0
- 189 Factory_Bad_Block_Ct 0x000e 100 100 001 Old_age Always - 155
- 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 0
- 195 Hardware_ECC_Recovered 0x003a 100 100 001 Old_age Always - 0
- 196 Reallocated_Event_Count 0x0032 100 100 001 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 100 100 001 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 100 100 001 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 100 100 001 Old_age Always - 0
- 202 Perc_Rated_Life_Used 0x0018 098 098 001 Old_age Offline - 2
- 206 Write_Error_Rate 0x000e 100 100 001 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 2370 -
- # 2 Short offline Completed without error 00% 2369 -
- # 3 Short offline Completed without error 00% 2369 -
- # 4 Short offline Completed without error 00% 2369 -
- # 5 Short offline Completed without error 00% 2369 -
- # 6 Short offline Completed without error 00% 2368 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- Examining /dev/disk2
- smartctl 6.2 2013-07-26 r3841 [x86_64-apple-darwin10.8.0] (local build)
- Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
- Smartctl open device: /dev/disk2 failed: Operation not supported by device
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement