API tools faq
paste
Advertisement
kamalj

/dev/ada4

kamalj
May 17th, 2015
307
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.98 KB | None | 0 0
raw download clone embed print report
  1. [root@freenas] ~# smartctl -a /dev/ada4
  2. smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
  3. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Toshiba 3.5" DT01ACA... Desktop HDD
  7. Device Model: TOSHIBA DT01ACA300
  8. Serial Number: Y3xxxxx6GS
  9. LU WWN Device Id: 5 000039 ff4d3ccc4
  10. Firmware Version: MX6OABB0
  11. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 7200 rpm
  14. Form Factor: 3.5 inches
  15. Device is: In smartctl database [for details use: -P show]
  16. ATA Version is: ATA8-ACS T13/1699-D revision 4
  17. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  18. Local Time is: Sun May 17 12:46:24 2015 EDT
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART overall-health self-assessment test result: PASSED
  24.  
  25. General SMART Values:
  26. Offline data collection status: (0x82) Offline data collection activity
  27. was completed without error.
  28. Auto Offline Data Collection: Enabled.
  29. Self-test execution status: ( 33) The self-test routine was interrupted
  30. by the host with a hard or soft reset.
  31. Total time to complete Offline
  32. data collection: (22078) seconds.
  33. Offline data collection
  34. capabilities: (0x5b) SMART execute Offline immediate.
  35. Auto Offline data collection on/off support.
  36. Suspend Offline collection upon new
  37. command.
  38. Offline surface scan supported.
  39. Self-test supported.
  40. No Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0003) Saves SMART data before entering
  43. power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 1) minutes.
  49. Extended self-test routine
  50. recommended polling time: ( 368) minutes.
  51. SCT capabilities: (0x003d) SCT Status supported.
  52. SCT Error Recovery Control supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  60. 2 Throughput_Performance 0x0005 140 140 054 Pre-fail Offline - 69
  61. 3 Spin_Up_Time 0x0007 177 177 024 Pre-fail Always - 337 (Average 311)
  62. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 76
  63. 5 Reallocated_Sector_Ct 0x0033 091 091 005 Pre-fail Always - 334
  64. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  65. 8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
  66. 9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 7984
  67. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  68. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 76
  69. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 280
  70. 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 280
  71. 194 Temperature_Celsius 0x0002 166 166 000 Old_age Always - 36 (Min/Max 21/43)
  72. 196 Reallocated_Event_Count 0x0032 084 084 000 Old_age Always - 455
  73. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 80
  74. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  75. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
  76.  
  77. SMART Error Log Version: 1
  78. ATA Error Count: 23 (device log contains only the most recent five errors)
  79. CR = Command Register [HEX]
  80. FR = Features Register [HEX]
  81. SC = Sector Count Register [HEX]
  82. SN = Sector Number Register [HEX]
  83. CL = Cylinder Low Register [HEX]
  84. CH = Cylinder High Register [HEX]
  85. DH = Device/Head Register [HEX]
  86. DC = Device Command Register [HEX]
  87. ER = Error register [HEX]
  88. ST = Status register [HEX]
  89. Powered_Up_Time is measured from power on, and printed as
  90. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  91. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  92.  
  93. Error 23 occurred at disk power-on lifetime: 7812 hours (325 days + 12 hours)
  94. When the command that caused the error occurred, the device was active or idle.
  95.  
  96. After command completion occurred, registers were:
  97. ER ST SC SN CL CH DH
  98. -- -- -- -- -- -- --
  99. 40 51 58 a8 6a 79 0c Error: UNC at LBA = 0x0c796aa8 = 209283752
  100.  
  101. Commands leading to the command that caused the error were:
  102. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  103. -- -- -- -- -- -- -- -- ---------------- --------------------
  104. 60 00 00 00 6b 79 40 00 3d+21:24:07.350 READ FPDMA QUEUED
  105. 60 00 f8 00 6a 79 40 00 3d+21:24:04.245 READ FPDMA QUEUED
  106. 60 00 f0 00 69 79 40 00 3d+21:24:04.137 READ FPDMA QUEUED
  107. 60 00 e8 00 68 79 40 00 3d+21:24:03.696 READ FPDMA QUEUED
  108. 60 00 e0 00 67 79 40 00 3d+21:24:03.604 READ FPDMA QUEUED
  109.  
  110. Error 22 occurred at disk power-on lifetime: 7812 hours (325 days + 12 hours)
  111. When the command that caused the error occurred, the device was active or idle.
  112.  
  113. After command completion occurred, registers were:
  114. ER ST SC SN CL CH DH
  115. -- -- -- -- -- -- --
  116. 40 51 e0 98 2e 79 0c Error: UNC at LBA = 0x0c792e98 = 209268376
  117.  
  118. Commands leading to the command that caused the error were:
  119. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  120. -- -- -- -- -- -- -- -- ---------------- --------------------
  121. 60 00 58 78 2f 79 40 00 3d+21:23:45.781 READ FPDMA QUEUED
  122. 60 00 50 78 2e 79 40 00 3d+21:23:45.781 READ FPDMA QUEUED
  123. 2f 00 01 10 00 00 00 00 3d+21:23:45.709 READ LOG EXT
  124. 60 00 50 78 2f 79 40 00 3d+21:23:41.873 READ FPDMA QUEUED
  125. 60 00 48 78 2e 79 40 00 3d+21:23:41.873 READ FPDMA QUEUED
  126.  
  127. Error 21 occurred at disk power-on lifetime: 7812 hours (325 days + 12 hours)
  128. When the command that caused the error occurred, the device was active or idle.
  129.  
  130. After command completion occurred, registers were:
  131. ER ST SC SN CL CH DH
  132. -- -- -- -- -- -- --
  133. 40 51 e0 98 2e 79 0c Error: UNC at LBA = 0x0c792e98 = 209268376
  134.  
  135. Commands leading to the command that caused the error were:
  136. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  137. -- -- -- -- -- -- -- -- ---------------- --------------------
  138. 60 00 50 78 2f 79 40 00 3d+21:23:41.873 READ FPDMA QUEUED
  139. 60 00 48 78 2e 79 40 00 3d+21:23:41.873 READ FPDMA QUEUED
  140. 2f 00 01 10 00 00 00 00 3d+21:23:41.791 READ LOG EXT
  141. 60 00 48 78 2f 79 40 00 3d+21:23:34.852 READ FPDMA QUEUED
  142. 60 00 40 78 2e 79 40 00 3d+21:23:34.852 READ FPDMA QUEUED
  143.  
  144. Error 20 occurred at disk power-on lifetime: 7812 hours (325 days + 12 hours)
  145. When the command that caused the error occurred, the device was active or idle.
  146.  
  147. After command completion occurred, registers were:
  148. ER ST SC SN CL CH DH
  149. -- -- -- -- -- -- --
  150. 40 51 e0 98 2e 79 0c Error: UNC at LBA = 0x0c792e98 = 209268376
  151.  
  152. Commands leading to the command that caused the error were:
  153. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  154. -- -- -- -- -- -- -- -- ---------------- --------------------
  155. 60 00 48 78 2f 79 40 00 3d+21:23:34.852 READ FPDMA QUEUED
  156. 60 00 40 78 2e 79 40 00 3d+21:23:34.852 READ FPDMA QUEUED
  157. 2f 00 01 10 00 00 00 00 3d+21:23:34.778 READ LOG EXT
  158. 60 00 40 78 2f 79 40 00 3d+21:23:27.747 READ FPDMA QUEUED
  159. 60 00 38 78 2e 79 40 00 3d+21:23:27.747 READ FPDMA QUEUED
  160.  
  161. Error 19 occurred at disk power-on lifetime: 7812 hours (325 days + 12 hours)
  162. When the command that caused the error occurred, the device was active or idle.
  163.  
  164. After command completion occurred, registers were:
  165. ER ST SC SN CL CH DH
  166. -- -- -- -- -- -- --
  167. 40 51 f0 88 2e 79 0c Error: UNC at LBA = 0x0c792e88 = 209268360
  168.  
  169. Commands leading to the command that caused the error were:
  170. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  171. -- -- -- -- -- -- -- -- ---------------- --------------------
  172. 60 00 40 78 2f 79 40 00 3d+21:23:27.747 READ FPDMA QUEUED
  173. 60 00 38 78 2e 79 40 00 3d+21:23:27.747 READ FPDMA QUEUED
  174. 2f 00 01 10 00 00 00 00 3d+21:23:27.665 READ LOG EXT
  175. 60 00 38 78 2f 79 40 00 3d+21:23:21.211 READ FPDMA QUEUED
  176. 60 00 30 78 2e 79 40 00 3d+21:23:20.380 READ FPDMA QUEUED
  177.  
  178. SMART Self-test log structure revision number 1
  179. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  180. # 1 Extended offline Interrupted (host reset) 10% 7960 -
  181. # 2 Short offline Completed without error 00% 7952 -
  182. # 3 Extended offline Completed without error 00% 7840 -
  183. # 4 Short offline Completed without error 00% 7832 -
  184. # 5 Extended offline Completed without error 00% 7720 -
  185. # 6 Short offline Completed without error 00% 7712 -
  186. # 7 Extended offline Completed without error 00% 7600 -
  187. # 8 Short offline Completed without error 00% 7592 -
  188. # 9 Extended offline Completed without error 00% 7480 -
  189. #10 Short offline Completed without error 00% 7472 -
  190. #11 Extended offline Completed without error 00% 7360 -
  191. #12 Short offline Completed without error 00% 7352 -
  192. #13 Extended offline Completed without error 00% 7240 -
  193. #14 Short offline Completed without error 00% 7232 -
  194. #15 Extended offline Completed without error 00% 7120 -
  195. #16 Short offline Completed without error 00% 7112 -
  196. #17 Extended offline Completed without error 00% 7000 -
  197. #18 Short offline Completed without error 00% 6992 -
  198. #19 Extended offline Completed without error 00% 6880 -
  199. #20 Short offline Completed without error 00% 6872 -
  200. #21 Extended offline Completed without error 00% 6856 -
  201.  
  202. SMART Selective self-test log data structure revision number 1
  203. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  204. 1 0 0 Not_testing
  205. 2 0 0 Not_testing
  206. 3 0 0 Not_testing
  207. 4 0 0 Not_testing
  208. 5 0 0 Not_testing
  209. Selective self-test flags (0x0):
  210. After scanning selected spans, do NOT read-scan remainder of disk.
  211. If Selective self-test is pending on power-up, resume after 0 minute delay.
  212.  
  213. [root@freenas] ~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!