Guest User

Untitled

a guest
Apr 25th, 2013
275
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 26.50 KB | None | 0 0
  1. [ 259.061]
  2. X.Org X Server 1.14.1
  3. Release Date: 2013-04-17
  4. [ 259.061] X Protocol Version 11, Revision 0
  5. [ 259.061] Build Operating System: Linux 3.8.7-1-ARCH x86_64
  6. [ 259.061] Current Operating System: Linux kiv-notebook 3.8.8-1-ARCH #1 SMP PREEMPT Wed Apr 17 10:57:28 CEST 2013 x86_64
  7. [ 259.061] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=106d8195-7525-4ef0-945b-36158d286ff0 ro acpi_backlight=vendor i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 add_efi_memmap intel_iommu=on quiet init=/bin/systemd resume=/dev/disk/by-uuid/134233c2-6e42-481f-80a5-23f14b43b416
  8. [ 259.061] Build Date: 17 April 2013 02:37:06PM
  9. [ 259.061]
  10. [ 259.061] Current version of pixman: 0.28.2
  11. [ 259.061] Before reporting problems, check http://wiki.x.org
  12. to make sure that you have the latest version.
  13. [ 259.061] Markers: (--) probed, (**) from config file, (==) default setting,
  14. (++) from command line, (!!) notice, (II) informational,
  15. (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
  16. [ 259.062] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 26 01:11:09 2013
  17. [ 259.062] (==) Using config directory: "/etc/X11/xorg.conf.d"
  18. [ 259.062] (==) No Layout section. Using the first Screen section.
  19. [ 259.062] (==) No screen section available. Using defaults.
  20. [ 259.062] (**) |-->Screen "Default Screen Section" (0)
  21. [ 259.062] (**) | |-->Monitor "<default monitor>"
  22. [ 259.063] (==) No monitor specified for screen "Default Screen Section".
  23. Using a default monitor configuration.
  24. [ 259.063] (==) Automatically adding devices
  25. [ 259.063] (==) Automatically enabling devices
  26. [ 259.063] (==) Automatically adding GPU devices
  27. [ 259.063] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
  28. [ 259.063] Entry deleted from font path.
  29. [ 259.063] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
  30. [ 259.063] Entry deleted from font path.
  31. [ 259.063] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
  32. [ 259.063] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
  33. [ 259.063] Entry deleted from font path.
  34. [ 259.063] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
  35. [ 259.063] (==) FontPath set to:
  36. /usr/share/fonts/misc/,
  37. /usr/share/fonts/TTF/,
  38. /usr/share/fonts/Type1/
  39. [ 259.063] (==) ModulePath set to "/usr/lib/xorg/modules"
  40. [ 259.063] (II) The server relies on udev to provide the list of input devices.
  41. If no devices become available, reconfigure udev or disable AutoAddDevices.
  42. [ 259.063] (II) Loader magic: 0x7fcc20
  43. [ 259.063] (II) Module ABI versions:
  44. [ 259.063] X.Org ANSI C Emulation: 0.4
  45. [ 259.063] X.Org Video Driver: 14.1
  46. [ 259.063] X.Org XInput driver : 19.1
  47. [ 259.063] X.Org Server Extension : 7.0
  48. [ 259.064] (II) config/udev: Adding drm device (/dev/dri/card0)
  49. [ 259.066] (--) PCI:*(0:0:2:0) 8086:0116:144d:c0b6 rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00003000/64
  50. [ 259.066] Initializing built-in extension Generic Event Extension
  51. [ 259.066] Initializing built-in extension SHAPE
  52. [ 259.066] Initializing built-in extension MIT-SHM
  53. [ 259.066] Initializing built-in extension XInputExtension
  54. [ 259.066] Initializing built-in extension XTEST
  55. [ 259.066] Initializing built-in extension BIG-REQUESTS
  56. [ 259.066] Initializing built-in extension SYNC
  57. [ 259.066] Initializing built-in extension XKEYBOARD
  58. [ 259.066] Initializing built-in extension XC-MISC
  59. [ 259.066] Initializing built-in extension SECURITY
  60. [ 259.067] Initializing built-in extension XINERAMA
  61. [ 259.067] Initializing built-in extension XFIXES
  62. [ 259.067] Initializing built-in extension RENDER
  63. [ 259.067] Initializing built-in extension RANDR
  64. [ 259.067] Initializing built-in extension COMPOSITE
  65. [ 259.067] Initializing built-in extension DAMAGE
  66. [ 259.067] Initializing built-in extension MIT-SCREEN-SAVER
  67. [ 259.067] Initializing built-in extension DOUBLE-BUFFER
  68. [ 259.067] Initializing built-in extension RECORD
  69. [ 259.067] Initializing built-in extension DPMS
  70. [ 259.067] Initializing built-in extension X-Resource
  71. [ 259.067] Initializing built-in extension XVideo
  72. [ 259.067] Initializing built-in extension XVideo-MotionCompensation
  73. [ 259.067] Initializing built-in extension XFree86-VidModeExtension
  74. [ 259.067] Initializing built-in extension XFree86-DGA
  75. [ 259.067] Initializing built-in extension XFree86-DRI
  76. [ 259.067] Initializing built-in extension DRI2
  77. [ 259.067] (II) LoadModule: "glx"
  78. [ 259.067] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
  79. [ 259.067] (II) Module glx: vendor="X.Org Foundation"
  80. [ 259.067] compiled for 1.14.1, module version = 1.0.0
  81. [ 259.067] ABI class: X.Org Server Extension, version 7.0
  82. [ 259.067] (==) AIGLX enabled
  83. [ 259.067] Loading extension GLX
  84. [ 259.067] (==) Matched intel as autoconfigured driver 0
  85. [ 259.067] (==) Matched intel as autoconfigured driver 1
  86. [ 259.067] (==) Matched vesa as autoconfigured driver 2
  87. [ 259.067] (==) Matched modesetting as autoconfigured driver 3
  88. [ 259.067] (==) Matched fbdev as autoconfigured driver 4
  89. [ 259.067] (==) Assigned the driver to the xf86ConfigLayout
  90. [ 259.067] (II) LoadModule: "intel"
  91. [ 259.067] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
  92. [ 259.067] (II) Module intel: vendor="X.Org Foundation"
  93. [ 259.067] compiled for 1.14.0, module version = 2.21.6
  94. [ 259.067] Module class: X.Org Video Driver
  95. [ 259.067] ABI class: X.Org Video Driver, version 14.1
  96. [ 259.067] (II) LoadModule: "vesa"
  97. [ 259.067] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
  98. [ 259.067] (II) Module vesa: vendor="X.Org Foundation"
  99. [ 259.067] compiled for 1.14.0, module version = 2.3.2
  100. [ 259.067] Module class: X.Org Video Driver
  101. [ 259.067] ABI class: X.Org Video Driver, version 14.1
  102. [ 259.067] (II) LoadModule: "modesetting"
  103. [ 259.068] (WW) Warning, couldn't open module modesetting
  104. [ 259.068] (II) UnloadModule: "modesetting"
  105. [ 259.068] (II) Unloading modesetting
  106. [ 259.068] (EE) Failed to load module "modesetting" (module does not exist, 0)
  107. [ 259.068] (II) LoadModule: "fbdev"
  108. [ 259.068] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
  109. [ 259.068] (II) Module fbdev: vendor="X.Org Foundation"
  110. [ 259.068] compiled for 1.14.0, module version = 0.4.3
  111. [ 259.068] Module class: X.Org Video Driver
  112. [ 259.068] ABI class: X.Org Video Driver, version 14.1
  113. [ 259.068] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
  114. i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
  115. E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
  116. 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
  117. 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
  118. Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
  119. Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
  120. Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
  121. Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
  122. Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
  123. Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
  124. Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
  125. Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
  126. Haswell Server (GT2+), Haswell SDV Desktop (GT1),
  127. Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
  128. Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
  129. Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
  130. Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
  131. Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
  132. Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
  133. Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
  134. Haswell ULT Server (GT1), Haswell ULT Server (GT2),
  135. Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
  136. Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
  137. Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
  138. Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
  139. Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
  140. ValleyView PO board
  141. [ 259.069] (II) VESA: driver for VESA chipsets: vesa
  142. [ 259.069] (II) FBDEV: driver for framebuffer: fbdev
  143. [ 259.069] (++) using VT number 1
  144.  
  145. [ 259.069] (WW) Falling back to old probe method for vesa
  146. [ 259.069] (WW) Falling back to old probe method for fbdev
  147. [ 259.069] (II) Loading sub module "fbdevhw"
  148. [ 259.069] (II) LoadModule: "fbdevhw"
  149. [ 259.069] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
  150. [ 259.069] (II) Module fbdevhw: vendor="X.Org Foundation"
  151. [ 259.069] compiled for 1.14.1, module version = 0.0.2
  152. [ 259.069] ABI class: X.Org Video Driver, version 14.1
  153. [ 259.069] (II) intel(0): Creating default Display subsection in Screen section
  154. "Default Screen Section" for depth/fbbpp 24/32
  155. [ 259.069] (==) intel(0): Depth 24, (--) framebuffer bpp 32
  156. [ 259.069] (==) intel(0): RGB weight 888
  157. [ 259.069] (==) intel(0): Default visual is TrueColor
  158. [ 259.069] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
  159. [ 259.069] (**) intel(0): Relaxed fencing enabled
  160. [ 259.069] (**) intel(0): Wait on SwapBuffers? enabled
  161. [ 259.069] (**) intel(0): Triple buffering? enabled
  162. [ 259.069] (**) intel(0): Framebuffer tiled
  163. [ 259.069] (**) intel(0): Pixmaps tiled
  164. [ 259.069] (**) intel(0): 3D buffers tiled
  165. [ 259.069] (**) intel(0): SwapBuffers wait enabled
  166. [ 259.069] (==) intel(0): video overlay key set to 0x101fe
  167. [ 259.070] (II) intel(0): Output LVDS1 has no monitor section
  168. [ 259.070] (--) intel(0): found backlight control interface /sys/class/backlight/samsung
  169. [ 259.083] (II) intel(0): Output VGA1 has no monitor section
  170. [ 259.096] (II) intel(0): Output HDMI1 has no monitor section
  171. [ 259.136] (II) intel(0): Output DP1 has no monitor section
  172. [ 259.137] (II) intel(0): EDID for output LVDS1
  173. [ 259.137] (II) intel(0): Manufacturer: SEC Model: 3649 Serial#: 0
  174. [ 259.137] (II) intel(0): Year: 2011 Week: 0
  175. [ 259.137] (II) intel(0): EDID Version: 1.3
  176. [ 259.137] (II) intel(0): Digital Display Input
  177. [ 259.137] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
  178. [ 259.137] (II) intel(0): Gamma: 2.20
  179. [ 259.137] (II) intel(0): No DPMS capabilities specified
  180. [ 259.137] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
  181. [ 259.137] (II) intel(0): First detailed timing is preferred mode
  182. [ 259.137] (II) intel(0): redX: 0.565 redY: 0.350 greenX: 0.340 greenY: 0.565
  183. [ 259.137] (II) intel(0): blueX: 0.155 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
  184. [ 259.137] (II) intel(0): Manufacturer's mask: 0
  185. [ 259.137] (II) intel(0): Supported detailed timing:
  186. [ 259.137] (II) intel(0): clock: 70.7 MHz Image Size: 309 x 174 mm
  187. [ 259.137] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1486 h_border: 0
  188. [ 259.137] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 792 v_border: 0
  189. [ 259.137] (II) intel(0): Unknown vendor-specific block f
  190. [ 259.137] (II) intel(0): SAMSUNG
  191. [ 259.137] (II) intel(0): LTN140AT210
  192. [ 259.137] (II) intel(0): EDID (in hex):
  193. [ 259.137] (II) intel(0): 00ffffffffffff004ca3493600000000
  194. [ 259.137] (II) intel(0): 00150103801f11780ae3f59059579027
  195. [ 259.137] (II) intel(0): 1e505400000001010101010101010101
  196. [ 259.137] (II) intel(0): 0101010101019e1b5678500018303020
  197. [ 259.137] (II) intel(0): 250035ae100000190000000f00000000
  198. [ 259.137] (II) intel(0): 00000000001eb4027400000000fe0053
  199. [ 259.137] (II) intel(0): 414d53554e470a2020202020000000fe
  200. [ 259.137] (II) intel(0): 004c544e31343041543231300a20001c
  201. [ 259.138] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
  202. [ 259.138] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
  203. [ 259.138] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
  204. [ 259.138] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
  205. [ 259.138] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
  206. [ 259.138] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
  207. [ 259.138] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
  208. [ 259.138] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
  209. [ 259.138] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
  210. [ 259.138] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
  211. [ 259.138] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
  212. [ 259.138] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
  213. [ 259.138] (II) intel(0): Printing probed modes for output LVDS1
  214. [ 259.138] (II) intel(0): Modeline "1366x768"x60.1 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
  215. [ 259.138] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
  216. [ 259.138] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
  217. [ 259.138] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
  218. [ 259.138] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
  219. [ 259.150] (II) intel(0): EDID for output VGA1
  220. [ 259.163] (II) intel(0): EDID for output HDMI1
  221. [ 259.203] (II) intel(0): EDID for output DP1
  222. [ 259.203] (II) intel(0): Output LVDS1 connected
  223. [ 259.203] (II) intel(0): Output VGA1 disconnected
  224. [ 259.203] (II) intel(0): Output HDMI1 disconnected
  225. [ 259.203] (II) intel(0): Output DP1 disconnected
  226. [ 259.203] (II) intel(0): Using exact sizes for initial modes
  227. [ 259.203] (II) intel(0): Output LVDS1 using initial mode 1366x768
  228. [ 259.203] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
  229. [ 259.203] (II) intel(0): Kernel page flipping support detected, enabling
  230. [ 259.203] (==) intel(0): DPI set to (96, 96)
  231. [ 259.203] (II) Loading sub module "fb"
  232. [ 259.203] (II) LoadModule: "fb"
  233. [ 259.203] (II) Loading /usr/lib/xorg/modules/libfb.so
  234. [ 259.204] (II) Module fb: vendor="X.Org Foundation"
  235. [ 259.204] compiled for 1.14.1, module version = 1.0.0
  236. [ 259.204] ABI class: X.Org ANSI C Emulation, version 0.4
  237. [ 259.204] (II) Loading sub module "dri2"
  238. [ 259.204] (II) LoadModule: "dri2"
  239. [ 259.204] (II) Module "dri2" already built-in
  240. [ 259.204] (II) UnloadModule: "vesa"
  241. [ 259.204] (II) Unloading vesa
  242. [ 259.204] (II) UnloadModule: "fbdev"
  243. [ 259.204] (II) Unloading fbdev
  244. [ 259.204] (II) UnloadSubModule: "fbdevhw"
  245. [ 259.204] (II) Unloading fbdevhw
  246. [ 259.204] (==) Depth 24 pixmap format is 32 bpp
  247. [ 259.204] (II) intel(0): [DRI2] Setup complete
  248. [ 259.204] (II) intel(0): [DRI2] DRI driver: i965
  249. [ 259.204] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
  250. [ 259.205] (II) UXA(0): Driver registered support for the following operations:
  251. [ 259.205] (II) solid
  252. [ 259.205] (II) copy
  253. [ 259.205] (II) composite (RENDER acceleration)
  254. [ 259.205] (II) put_image
  255. [ 259.205] (II) get_image
  256. [ 259.205] (==) intel(0): Backing store disabled
  257. [ 259.205] (==) intel(0): Silken mouse enabled
  258. [ 259.205] (II) intel(0): Initializing HW Cursor
  259. [ 259.205] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
  260. [ 259.207] (==) intel(0): DPMS enabled
  261. [ 259.207] (==) intel(0): Intel XvMC decoder enabled
  262. [ 259.207] (II) intel(0): Set up textured video
  263. [ 259.207] (II) intel(0): [XvMC] xvmc_vld driver initialized.
  264. [ 259.207] (II) intel(0): direct rendering: DRI2 Enabled
  265. [ 259.207] (==) intel(0): hotplug detection: "enabled"
  266. [ 259.223] (--) RandR disabled
  267. [ 259.239] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
  268. [ 259.239] (II) AIGLX: enabled GLX_INTEL_swap_event
  269. [ 259.239] (II) AIGLX: enabled GLX_ARB_create_context
  270. [ 259.239] (II) AIGLX: enabled GLX_ARB_create_context_profile
  271. [ 259.239] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
  272. [ 259.239] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
  273. [ 259.239] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
  274. [ 259.239] (II) AIGLX: Loaded and initialized i965
  275. [ 259.239] (II) GLX: Initialized DRI2 GL provider for screen 0
  276. [ 259.239] (II) intel(0): Setting screen physical size to 361 x 203
  277. [ 259.290] (II) config/udev: Adding input device Power Button (/dev/input/event3)
  278. [ 259.290] (**) Power Button: Applying InputClass "system-keyboard"
  279. [ 259.290] (**) Power Button: Applying InputClass "evdev keyboard catchall"
  280. [ 259.290] (II) LoadModule: "evdev"
  281. [ 259.290] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
  282. [ 259.290] (II) Module evdev: vendor="X.Org Foundation"
  283. [ 259.290] compiled for 1.14.0, module version = 2.8.0
  284. [ 259.290] Module class: X.Org XInput Driver
  285. [ 259.290] ABI class: X.Org XInput driver, version 19.1
  286. [ 259.291] (II) Using input driver 'evdev' for 'Power Button'
  287. [ 259.291] (**) Power Button: always reports core events
  288. [ 259.291] (**) evdev: Power Button: Device: "/dev/input/event3"
  289. [ 259.291] (--) evdev: Power Button: Vendor 0 Product 0x1
  290. [ 259.291] (--) evdev: Power Button: Found keys
  291. [ 259.291] (II) evdev: Power Button: Configuring as keyboard
  292. [ 259.291] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
  293. [ 259.291] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
  294. [ 259.291] (**) Option "xkb_rules" "evdev"
  295. [ 259.291] (**) Option "xkb_model" "evdev"
  296. [ 259.291] (**) Option "xkb_layout" "us,ru"
  297. [ 259.291] (**) Option "xkb_variant" ","
  298. [ 259.331] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
  299. [ 259.331] (**) Video Bus: Applying InputClass "system-keyboard"
  300. [ 259.331] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
  301. [ 259.331] (II) Using input driver 'evdev' for 'Video Bus'
  302. [ 259.331] (**) Video Bus: always reports core events
  303. [ 259.331] (**) evdev: Video Bus: Device: "/dev/input/event4"
  304. [ 259.331] (--) evdev: Video Bus: Vendor 0 Product 0x6
  305. [ 259.332] (--) evdev: Video Bus: Found keys
  306. [ 259.332] (II) evdev: Video Bus: Configuring as keyboard
  307. [ 259.332] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
  308. [ 259.332] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
  309. [ 259.332] (**) Option "xkb_rules" "evdev"
  310. [ 259.332] (**) Option "xkb_model" "evdev"
  311. [ 259.332] (**) Option "xkb_layout" "us,ru"
  312. [ 259.332] (**) Option "xkb_variant" ","
  313. [ 259.333] (II) config/udev: Adding input device Power Button (/dev/input/event2)
  314. [ 259.333] (**) Power Button: Applying InputClass "system-keyboard"
  315. [ 259.333] (**) Power Button: Applying InputClass "evdev keyboard catchall"
  316. [ 259.333] (II) Using input driver 'evdev' for 'Power Button'
  317. [ 259.333] (**) Power Button: always reports core events
  318. [ 259.333] (**) evdev: Power Button: Device: "/dev/input/event2"
  319. [ 259.333] (--) evdev: Power Button: Vendor 0 Product 0x1
  320. [ 259.333] (--) evdev: Power Button: Found keys
  321. [ 259.333] (II) evdev: Power Button: Configuring as keyboard
  322. [ 259.333] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
  323. [ 259.333] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
  324. [ 259.333] (**) Option "xkb_rules" "evdev"
  325. [ 259.333] (**) Option "xkb_model" "evdev"
  326. [ 259.333] (**) Option "xkb_layout" "us,ru"
  327. [ 259.333] (**) Option "xkb_variant" ","
  328. [ 259.334] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
  329. [ 259.334] (II) No input driver specified, ignoring this device.
  330. [ 259.334] (II) This device may have been added with another device file.
  331. [ 259.335] (II) config/udev: Adding drm device (/dev/dri/card0)
  332. [ 259.336] (II) config/udev: Adding input device WebCam SCB-1100N (/dev/input/event10)
  333. [ 259.336] (**) WebCam SCB-1100N: Applying InputClass "system-keyboard"
  334. [ 259.336] (**) WebCam SCB-1100N: Applying InputClass "evdev keyboard catchall"
  335. [ 259.336] (II) Using input driver 'evdev' for 'WebCam SCB-1100N'
  336. [ 259.336] (**) WebCam SCB-1100N: always reports core events
  337. [ 259.336] (**) evdev: WebCam SCB-1100N: Device: "/dev/input/event10"
  338. [ 259.336] (--) evdev: WebCam SCB-1100N: Vendor 0x2232 Product 0x1008
  339. [ 259.336] (--) evdev: WebCam SCB-1100N: Found keys
  340. [ 259.336] (II) evdev: WebCam SCB-1100N: Configuring as keyboard
  341. [ 259.336] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
  342. [ 259.336] (II) XINPUT: Adding extended input device "WebCam SCB-1100N" (type: KEYBOARD, id 9)
  343. [ 259.336] (**) Option "xkb_rules" "evdev"
  344. [ 259.336] (**) Option "xkb_model" "evdev"
  345. [ 259.336] (**) Option "xkb_layout" "us,ru"
  346. [ 259.336] (**) Option "xkb_variant" ","
  347. [ 259.337] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
  348. [ 259.337] (II) No input driver specified, ignoring this device.
  349. [ 259.337] (II) This device may have been added with another device file.
  350. [ 259.337] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
  351. [ 259.337] (II) No input driver specified, ignoring this device.
  352. [ 259.337] (II) This device may have been added with another device file.
  353. [ 259.337] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
  354. [ 259.337] (II) No input driver specified, ignoring this device.
  355. [ 259.337] (II) This device may have been added with another device file.
  356. [ 259.337] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
  357. [ 259.337] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
  358. [ 259.337] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
  359. [ 259.337] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
  360. [ 259.337] (**) AT Translated Set 2 keyboard: always reports core events
  361. [ 259.337] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
  362. [ 259.337] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
  363. [ 259.337] (--) evdev: AT Translated Set 2 keyboard: Found keys
  364. [ 259.337] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
  365. [ 259.337] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
  366. [ 259.337] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
  367. [ 259.337] (**) Option "xkb_rules" "evdev"
  368. [ 259.337] (**) Option "xkb_model" "evdev"
  369. [ 259.337] (**) Option "xkb_layout" "us,ru"
  370. [ 259.337] (**) Option "xkb_variant" ","
  371. [ 259.338] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event6)
  372. [ 259.338] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
  373. [ 259.338] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
  374. [ 259.338] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
  375. [ 259.338] (II) LoadModule: "synaptics"
  376. [ 259.338] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
  377. [ 259.338] (II) Module synaptics: vendor="X.Org Foundation"
  378. [ 259.338] compiled for 1.14.0, module version = 1.7.0
  379. [ 259.338] Module class: X.Org XInput Driver
  380. [ 259.338] ABI class: X.Org XInput driver, version 19.1
  381. [ 259.338] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
  382. [ 259.338] (**) ETPS/2 Elantech Touchpad: always reports core events
  383. [ 259.338] (**) Option "Device" "/dev/input/event6"
  384. [ 259.363] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2480 (res 0)
  385. [ 259.363] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1116 (res 0)
  386. [ 259.363] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
  387. [ 259.363] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
  388. [ 259.363] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
  389. [ 259.363] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
  390. [ 259.364] (**) Option "TapButton1" "1"
  391. [ 259.364] (**) Option "TapButton2" "2"
  392. [ 259.364] (**) Option "TapButton3" "3"
  393. [ 259.364] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
  394. [ 259.364] (**) ETPS/2 Elantech Touchpad: always reports core events
  395. [ 259.367] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
  396. [ 259.367] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11)
  397. [ 259.367] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
  398. [ 259.367] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
  399. [ 259.367] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.074
  400. [ 259.367] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
  401. [ 259.367] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
  402. [ 259.368] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
  403. [ 259.368] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
  404. [ 259.368] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
  405. [ 259.368] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
  406. [ 259.368] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
  407. [ 259.369] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
  408. [ 259.369] (II) No input driver specified, ignoring this device.
  409. [ 259.369] (II) This device may have been added with another device file.
  410. [ 261.647] (II) intel(0): EDID vendor "SEC", prod id 13897
  411. [ 261.647] (II) intel(0): Printing DDC gathered Modelines:
  412. [ 261.647] (II) intel(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
  413. [ 265.180] (II) intel(0): EDID vendor "SEC", prod id 13897
  414. [ 265.180] (II) intel(0): Printing DDC gathered Modelines:
  415. [ 265.180] (II) intel(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
  416. [ 271.049] (II) intel(0): EDID vendor "SEC", prod id 13897
  417. [ 271.049] (II) intel(0): Printing DDC gathered Modelines:
  418. [ 271.049] (II) intel(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
  419. [ 282.604] (II) AIGLX: Suspending AIGLX clients for VT switch
Advertisement
Add Comment
Please, Sign In to add comment