Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 02:00.0 Network controller: Qualcomm Atheros AR93xx Wireless Network Adapter (rev 01)
- Subsystem: Bigfoot Networks, Inc. Killer Wireless-N 1103 Half-size Mini PCIe Card [AR9380]
- Flags: bus master, fast devsel, latency 0, IRQ 18
- Memory at f7d00000 (64-bit, non-prefetchable) [size=128K]
- Expansion ROM at f7d20000 [disabled] [size=64K]
- Capabilities: [40] Power Management version 3
- Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+
- Capabilities: [70] Express Endpoint, MSI 00
- Capabilities: [100] Advanced Error Reporting
- Capabilities: [140] Virtual Channel
- Capabilities: [300] Device Serial Number 00-00-00-00-00-00-00-00
- Kernel driver in use: ath9k
- Kernel modules: ath9k
- 2.6.32-504.23.4.v6.x86_64
- Wiphy phy0
- max # scan SSIDs: 4
- max scan IEs length: 2257 bytes
- Coverage class: 0 (up to 0m)
- Device supports RSN-IBSS.
- Supported Ciphers:
- * WEP40 (00-0f-ac:1)
- * WEP104 (00-0f-ac:5)
- * TKIP (00-0f-ac:2)
- * CCMP (00-0f-ac:4)
- * CMAC (00-0f-ac:6)
- Available Antennas: TX 0x7 RX 0x7
- Configured Antennas: TX 0x7 RX 0x7
- Supported interface modes:
- * IBSS
- * managed
- * AP
- * AP/VLAN
- * WDS
- * monitor
- * P2P-client
- * P2P-GO
- Band 1:
- Capabilities: 0x11ef
- RX LDPC
- HT20/HT40
- SM Power Save disabled
- RX HT20 SGI
- RX HT40 SGI
- TX STBC
- RX STBC 1-stream
- Max AMSDU length: 3839 bytes
- DSSS/CCK HT40
- Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
- Minimum RX AMPDU time spacing: 8 usec (0x06)
- HT TX/RX MCS rate indexes supported: 0-23
- Bitrates (non-HT):
- * 1.0 Mbps
- * 2.0 Mbps (short preamble supported)
- * 5.5 Mbps (short preamble supported)
- * 11.0 Mbps (short preamble supported)
- * 6.0 Mbps
- * 9.0 Mbps
- * 12.0 Mbps
- * 18.0 Mbps
- * 24.0 Mbps
- * 36.0 Mbps
- * 48.0 Mbps
- * 54.0 Mbps
- Frequencies:
- * 2412 MHz [1] (16.0 dBm)
- * 2417 MHz [2] (16.0 dBm)
- * 2422 MHz [3] (16.0 dBm)
- * 2427 MHz [4] (16.0 dBm)
- * 2432 MHz [5] (16.0 dBm)
- * 2437 MHz [6] (16.0 dBm)
- * 2442 MHz [7] (16.0 dBm)
- * 2447 MHz [8] (16.0 dBm)
- * 2452 MHz [9] (16.0 dBm)
- * 2457 MHz [10] (16.0 dBm)
- * 2462 MHz [11] (16.0 dBm)
- * 2467 MHz [12] (16.0 dBm) (passive scanning)
- * 2472 MHz [13] (17.0 dBm) (passive scanning)
- * 2484 MHz [14] (22.0 dBm) (passive scanning)
- Band 2:
- Capabilities: 0x11ef
- RX LDPC
- HT20/HT40
- SM Power Save disabled
- RX HT20 SGI
- RX HT40 SGI
- TX STBC
- RX STBC 1-stream
- Max AMSDU length: 3839 bytes
- DSSS/CCK HT40
- Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
- Minimum RX AMPDU time spacing: 8 usec (0x06)
- HT TX/RX MCS rate indexes supported: 0-23
- Bitrates (non-HT):
- * 6.0 Mbps
- * 9.0 Mbps
- * 12.0 Mbps
- * 18.0 Mbps
- * 24.0 Mbps
- * 36.0 Mbps
- * 48.0 Mbps
- * 54.0 Mbps
- Frequencies:
- * 5180 MHz [36] (16.0 dBm) (passive scanning, no IBSS)
- * 5200 MHz [40] (16.0 dBm) (passive scanning, no IBSS)
- * 5220 MHz [44] (16.0 dBm) (passive scanning, no IBSS)
- * 5240 MHz [48] (16.0 dBm) (passive scanning, no IBSS)
- * 5260 MHz [52] (13.0 dBm) (passive scanning, no IBSS, radar detection)
- DFS state: usable (for 1121 sec)
- * 5280 MHz [56] (14.0 dBm) (passive scanning, no IBSS, radar detection)
- DFS state: usable (for 1121 sec)
- * 5300 MHz [60] (14.0 dBm) (passive scanning, no IBSS, radar detection)
- DFS state: usable (for 1121 sec)
- * 5320 MHz [64] (13.0 dBm) (passive scanning, no IBSS, radar detection)
- DFS state: usable (for 1121 sec)
- * 5500 MHz [100] (18.0 dBm) (passive scanning, no IBSS, radar detection)
- DFS state: usable (for 1121 sec)
- * 5520 MHz [104] (18.0 dBm) (passive scanning, no IBSS, radar detection)
- DFS state: usable (for 1121 sec)
- * 5540 MHz [108] (18.0 dBm) (passive scanning, no IBSS, radar detection)
- DFS state: usable (for 1121 sec)
- * 5560 MHz [112] (18.0 dBm) (passive scanning, no IBSS, radar detection)
- DFS state: usable (for 1121 sec)
- * 5580 MHz [116] (18.0 dBm) (passive scanning, no IBSS, radar detection)
- DFS state: usable (for 1121 sec)
- * 5600 MHz [120] (18.0 dBm) (passive scanning, no IBSS, radar detection)
- DFS state: usable (for 1121 sec)
- * 5620 MHz [124] (18.0 dBm) (passive scanning, no IBSS, radar detection)
- DFS state: usable (for 1121 sec)
- * 5640 MHz [128] (18.0 dBm) (passive scanning, no IBSS, radar detection)
- DFS state: usable (for 1121 sec)
- * 5660 MHz [132] (18.0 dBm) (passive scanning, no IBSS, radar detection)
- DFS state: usable (for 1121 sec)
- * 5680 MHz [136] (18.0 dBm) (passive scanning, no IBSS, radar detection)
- DFS state: usable (for 1121 sec)
- * 5700 MHz [140] (18.0 dBm) (passive scanning, no IBSS, radar detection)
- DFS state: usable (for 1121 sec)
- * 5745 MHz [149] (20.0 dBm) (passive scanning, no IBSS)
- * 5765 MHz [153] (20.0 dBm) (passive scanning, no IBSS)
- * 5785 MHz [157] (20.0 dBm) (passive scanning, no IBSS)
- * 5805 MHz [161] (20.0 dBm) (passive scanning, no IBSS)
- * 5825 MHz [165] (20.0 dBm) (passive scanning, no IBSS)
- Supported commands:
- * new_interface
- * set_interface
- * new_key
- * start_ap
- * new_station
- * set_bss
- * authenticate
- * associate
- * deauthenticate
- * disassociate
- * join_ibss
- * remain_on_channel
- * set_tx_bitrate_mask
- * frame
- * frame_wait_cancel
- * set_wiphy_netns
- * set_channel
- * set_wds_peer
- * tdls_mgmt
- * tdls_oper
- * probe_client
- * set_noack_map
- * register_beacons
- * start_p2p_device
- * Unknown command (92)
- * connect
- * disconnect
- Supported TX frame types:
- * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
- Supported RX frame types:
- * IBSS: 0x40 0xb0 0xc0 0xd0
- * managed: 0x40 0xd0
- * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
- * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
- * mesh point: 0xb0 0xc0 0xd0
- * P2P-client: 0x40 0xd0
- * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
- * P2P-device: 0x40 0xd0
- WoWLAN support:
- * wake up on disconnect
- * wake up on magic packet
- * wake up on pattern match, up to 6 patterns of 1-256 bytes,
- maximum packet offset 0 bytes
- software interface modes (can always be added):
- * AP/VLAN
- * monitor
- valid interface combinations:
- * #{ managed, WDS, P2P-client } <= 2048, #{ AP, P2P-GO } <= 8,
- total <= 2048, #channels <= 1, STA/AP BI must match
- * #{ AP } <= 1,
- total <= 1, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz }
- HT Capability overrides:
- * MCS: ff ff ff ff ff ff ff ff ff ff
- * maximum A-MSDU length
- * supported channel width
- * short GI for 40 MHz
- * max A-MPDU length exponent
- * min MPDU start spacing
- Device supports TX status socket option.
- Device supports HT-IBSS.
- Device supports low priority scan.
- Device supports scan flush.
- Device supports AP scan.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement