Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.10.35 (root@debian) (gcc version 4.7.3 20130102 (prerelease) (crosstool-NG 1.18.0) ) #1 SMP Sun Jul 17 16:02:22 CEST 2016
- [ 0.000000] Command line: BOOT_IMAGE=/zImage root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=B3J4N01003 vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ac1cfff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000009ac1d000-0x000000009ac2afff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000009ac2b000-0x000000009ad7efff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000009ad7f000-0x000000009ae7efff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000009ae7f000-0x000000009af7efff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000009af7f000-0x000000009affefff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045e5fffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.7 present.
- [ 0.000000] DMI: INSYDE QW09/Type2 - Board Product Name1, BIOS QW09IR10 05/12/2014
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x45e600 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-E7FFF write-protect
- [ 0.000000] E8000-EFFFF write-combining
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask 7800000000 write-back
- [ 0.000000] 1 base 009B000000 mask 7FFF000000 uncachable
- [ 0.000000] 2 base 009C000000 mask 7FFC000000 uncachable
- [ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
- [ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] 8 disabled
- [ 0.000000] 9 disabled
- [ 0.000000] e820: update [mem 0x9b000000-0xffffffff] usable ==> reserved
- [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
- [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] BRK [0x04f57000, 0x04f57fff] PGTABLE
- [ 0.000000] BRK [0x04f58000, 0x04f58fff] PGTABLE
- [ 0.000000] BRK [0x04f59000, 0x04f59fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x45e400000-0x45e5fffff]
- [ 0.000000] [mem 0x45e400000-0x45e5fffff] page 2M
- [ 0.000000] BRK [0x04f5a000, 0x04f5afff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45e3fffff]
- [ 0.000000] [mem 0x45c000000-0x45e3fffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff]
- [ 0.000000] [mem 0x400000000-0x43fffffff] page 1G
- [ 0.000000] [mem 0x440000000-0x45bffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9ac1cfff]
- [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
- [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
- [ 0.000000] [mem 0x80000000-0x9abfffff] page 2M
- [ 0.000000] [mem 0x9ac00000-0x9ac1cfff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x9ac2b000-0x9ad7efff]
- [ 0.000000] [mem 0x9ac2b000-0x9ad7efff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
- [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
- [ 0.000000] BRK [0x04f5b000, 0x04f5bfff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
- [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
- [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 INSYDE)
- [ 0.000000] ACPI: XSDT 000000009affe210 000BC (v01 INSYDE HSW-LPT 00000001 01000013)
- [ 0.000000] ACPI: FACP 000000009afe8000 0010C (v05 INSYDE HSW-LPT 00000001 ACPI 00040000)
- [ 0.000000] ACPI: DSDT 000000009afd2000 12053 (v01 INSYDE HSW-LPT 00000000 ACPI 00040000)
- [ 0.000000] ACPI: FACS 000000009af7b000 00040
- [ 0.000000] ACPI: UEFI 000000009afed000 10036 (v01 INSYDE HSW-LPT 00000001 ACPI 00040000)
- [ 0.000000] ACPI: FPDT 000000009afeb000 00044 (v01 INSYDE HSW-LPT 00000001 ACPI 00040000)
- [ 0.000000] ACPI: ASF! 000000009afe9000 000A5 (v32 INSYDE HSW-LPT 00000001 ACPI 00040000)
- [ 0.000000] ACPI: HPET 000000009afe7000 00038 (v01 INSYDE HSW-LPT 00000001 ACPI 00040000)
- [ 0.000000] ACPI: APIC 000000009afe6000 0008C (v03 INSYDE HSW-LPT 00000001 ACPI 00040000)
- [ 0.000000] ACPI: MCFG 000000009afe5000 0003C (v01 INSYDE HSW-LPT 00000001 ACPI 00040000)
- [ 0.000000] ACPI: SLIC 000000009afd1000 00176 (v01 INSYDE HSW-LPT 00000001 ACPI 00040000)
- [ 0.000000] ACPI: WDAT 000000009afd0000 00224 (v01 INSYDE HSW-LPT 00000001 ACPI 00040000)
- [ 0.000000] ACPI: SSDT 000000009afcd000 02028 (v01 INSYDE HSW-LPT 00001000 ACPI 00040000)
- [ 0.000000] ACPI: BOOT 000000009afcb000 00028 (v01 INSYDE HSW-LPT 00000001 ACPI 00040000)
- [ 0.000000] ACPI: LPIT 000000009afca000 0005C (v01 INSYDE HSW-LPT 00000001 ACPI 00040000)
- [ 0.000000] ACPI: ASPT 000000009afc8000 00034 (v07 INSYDE HSW-LPT 00000001 ACPI 00040000)
- [ 0.000000] ACPI: DBGP 000000009afc7000 00034 (v01 INSYDE HSW-LPT 00000001 ACPI 00040000)
- [ 0.000000] ACPI: SSDT 000000009afbf000 00539 (v01 INSYDE HSW-LPT 00003000 ACPI 00040000)
- [ 0.000000] ACPI: SSDT 000000009afbe000 00AD8 (v01 INSYDE HSW-LPT 00003000 ACPI 00040000)
- [ 0.000000] ACPI: SSDT 000000009afbd000 001C7 (v01 INSYDE HSW-LPT 00003000 ACPI 00040000)
- [ 0.000000] ACPI: SSDT 000000009afb9000 03492 (v01 INSYDE HSW-LPT 00003000 ACPI 00040000)
- [ 0.000000] ACPI: DMAR 000000009afb7000 000B8 (v01 INSYDE HSW-LPT 00000001 ACPI 00040000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] [ffffea0000000000-ffffea000f5fffff] PMD -> [ffff88044dc00000-ffff88045bdfffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal [mem 0x100000000-0x45e5fffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
- [ 0.000000] node 0: [mem 0x00100000-0x9ac1cfff]
- [ 0.000000] node 0: [mem 0x9ac2b000-0x9ad7efff]
- [ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
- [ 0.000000] node 0: [mem 0x100000000-0x45e5fffff]
- [ 0.000000] On node 0 totalpages: 4166414
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 21 pages reserved
- [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 8616 pages used for memmap
- [ 0.000000] DMA32 zone: 630130 pages, LIFO batch:31
- [ 0.000000] Normal zone: 48293 pages used for memmap
- [ 0.000000] Normal zone: 3532288 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 000000009ac1d000 - 000000009ac2b000
- [ 0.000000] PM: Registered nosave memory: 000000009ad7f000 - 000000009ae7f000
- [ 0.000000] PM: Registered nosave memory: 000000009ae7f000 - 000000009af7f000
- [ 0.000000] PM: Registered nosave memory: 000000009af7f000 - 000000009afff000
- [ 0.000000] PM: Registered nosave memory: 000000009b000000 - 000000009fa00000
- [ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
- [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
- [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
- [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb10000
- [ 0.000000] PM: Registered nosave memory: 00000000feb10000 - 00000000fec00000
- [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
- [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
- [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee01000
- [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
- [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
- [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88045e200000 s74496 r8192 d23808 u262144
- [ 0.000000] pcpu-alloc: s74496 r8192 d23808 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4109428
- [ 0.000000] Kernel command line: BOOT_IMAGE=/zImage root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=B3J4N01003 vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305
- [ 0.000000] Internal HD num: 0
- [ 0.000000] Internal netif num: 4
- [ 0.000000] Synology Hardware Version: DS3615xs-j
- [ 0.000000] Serial Number: B3J4N01003
- [ 0.000000] synoboot vid: 3744
- [ 0.000000] synoboot pid: 8552
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
- [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Memory: 16277636k/18323456k available (5290k kernel code, 1657800k absent, 388020k reserved, 3328k data, 54604k init)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 67108864 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.001000] tsc: Detected 3491.915 MHz processor
- [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6983.83 BogoMIPS (lpj=3491915)
- [ 0.000003] pid_max: default: 32768 minimum: 301
- [ 0.000022] Security Framework initialized
- [ 0.000026] AppArmor: AppArmor initialized
- [ 0.000032] Mount-cache hash table entries: 256
- [ 0.000129] Initializing cgroup subsys memory
- [ 0.000135] Disabling memory control group subsystem
- [ 0.000136] Initializing cgroup subsys devices
- [ 0.000137] Initializing cgroup subsys freezer
- [ 0.000137] Initializing cgroup subsys blkio
- [ 0.000154] CPU: Physical Processor ID: 0
- [ 0.000154] CPU: Processor Core ID: 0
- [ 0.000157] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.000157] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.000889] mce: CPU supports 9 MCE banks
- [ 0.000898] CPU0: Thermal monitoring enabled (TM1)
- [ 0.000906] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
- [ 0.000906] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
- [ 0.000906] tlb_flushall_shift: 6
- [ 0.000973] Freeing SMP alternatives: 24k freed
- [ 0.001396] ACPI: Core revision 20130328
- [ 0.007058] ACPI: All ACPI Tables successfully acquired
- [ 0.007686] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.017679] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1246 v3 @ 3.50GHz (fam: 06, model: 3c, stepping: 03)
- [ 0.017683] TSC deadline timer enabled
- [ 0.017688] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
- [ 0.017692] ... version: 3
- [ 0.017692] ... bit width: 48
- [ 0.017693] ... generic registers: 4
- [ 0.017693] ... value mask: 0000ffffffffffff
- [ 0.017694] ... max period: 000000007fffffff
- [ 0.017694] ... fixed-purpose events: 3
- [ 0.017695] ... event mask: 000000070000000f
- [ 0.017813] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
- [ 0.115523] Brought up 8 CPUs
- [ 0.115525] smpboot: Total of 8 processors activated (55870.64 BogoMIPS)
- [ 0.121604] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.121745] devtmpfs: initialized
- [ 0.121848] PM: Registering ACPI NVS region [mem 0x9ae7f000-0x9af7efff] (1048576 bytes)
- [ 0.121924] xor: automatically using best checksumming function:
- [ 0.131562] avx : 31232.000 MB/sec
- [ 0.131591] NET: Registered protocol family 16
- [ 0.131783] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.131784] ACPI: bus type PCI registered
- [ 0.131785] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.131850] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.131852] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.145205] PCI: Using configuration type 1 for base access
- [ 0.147517] bio: create slab <bio-0> at 0
- [ 0.164566] raid6: sse2x1 11230 MB/s
- [ 0.181560] raid6: sse2x2 13996 MB/s
- [ 0.198560] raid6: sse2x4 16355 MB/s
- [ 0.215556] raid6: avx2x1 22031 MB/s
- [ 0.232554] raid6: avx2x2 25042 MB/s
- [ 0.249552] raid6: avx2x4 29171 MB/s
- [ 0.249553] raid6: using algorithm avx2x4 (29171 MB/s)
- [ 0.249554] raid6: using avx2x2 recovery algorithm
- [ 0.249588] ACPI: Added _OSI(Module Device)
- [ 0.249589] ACPI: Added _OSI(Processor Device)
- [ 0.249590] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.249590] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.250780] ACPI: EC: Look up EC in DSDT
- [ 0.252058] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.257372] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.258027] ACPI: SSDT 000000009ae1cc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816)
- [ 0.258324] ACPI: Dynamic OEM Table Load:
- [ 0.258325] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816)
- [ 0.265718] ACPI: SSDT 000000009ae1c618 005AA (v01 PmRef ApIst 00003000 INTL 20120816)
- [ 0.266064] ACPI: Dynamic OEM Table Load:
- [ 0.266065] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20120816)
- [ 0.271636] ACPI: SSDT 000000009ae1bd98 00119 (v01 PmRef ApCst 00003000 INTL 20120816)
- [ 0.271934] ACPI: Dynamic OEM Table Load:
- [ 0.271935] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20120816)
- [ 0.280395] ACPI: Interpreter enabled
- [ 0.280404] ACPI: (supports S0 S4 S5)
- [ 0.280405] ACPI: Using IOAPIC for interrupt routing
- [ 0.280437] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.280683] ACPI: ACPI Dock Station Driver: 1 docks/bays found
- [ 0.287014] ACPI: Power Resource [FN00] (off)
- [ 0.287071] ACPI: Power Resource [FN01] (off)
- [ 0.287127] ACPI: Power Resource [FN02] (off)
- [ 0.287180] ACPI: Power Resource [FN03] (off)
- [ 0.287236] ACPI: Power Resource [FN04] (off)
- [ 0.287704] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
- [ 0.288139] acpiphp_glue: can't evaluate _ADR (0x5)
- [ 0.288160] PCI host bridge to bus 0000:00
- [ 0.288162] pci_bus 0000:00: root bus resource [bus 00-fe]
- [ 0.288163] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.288164] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.288165] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.288166] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
- [ 0.288171] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000
- [ 0.288268] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
- [ 0.288290] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.288358] pci 0000:00:01.0: System wakeup disabled by ACPI
- [ 0.288381] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
- [ 0.288402] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
- [ 0.288467] pci 0000:00:01.1: System wakeup disabled by ACPI
- [ 0.288490] pci 0000:00:01.2: [8086:0c09] type 01 class 0x060400
- [ 0.288511] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
- [ 0.288579] pci 0000:00:01.2: System wakeup disabled by ACPI
- [ 0.288606] pci 0000:00:02.0: [8086:041a] type 00 class 0x030000
- [ 0.288613] pci 0000:00:02.0: reg 10: [mem 0xb2000000-0xb23fffff 64bit]
- [ 0.288617] pci 0000:00:02.0: reg 18: [mem 0xa0000000-0xafffffff 64bit pref]
- [ 0.288620] pci 0000:00:02.0: reg 20: [io 0x7000-0x703f]
- [ 0.288712] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
- [ 0.288717] pci 0000:00:03.0: reg 10: [mem 0xb2f30000-0xb2f33fff 64bit]
- [ 0.288829] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
- [ 0.288845] pci 0000:00:14.0: reg 10: [mem 0xb2f20000-0xb2f2ffff 64bit]
- [ 0.288895] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 0.288958] pci 0000:00:14.0: System wakeup disabled by ACPI
- [ 0.288989] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
- [ 0.289005] pci 0000:00:16.0: reg 10: [mem 0xb2f38000-0xb2f3800f 64bit]
- [ 0.289059] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.289148] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
- [ 0.289161] pci 0000:00:16.3: reg 10: [io 0x70b0-0x70b7]
- [ 0.289168] pci 0000:00:16.3: reg 14: [mem 0xb2f40000-0xb2f40fff]
- [ 0.289311] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
- [ 0.289325] pci 0000:00:19.0: reg 10: [mem 0xb2f00000-0xb2f1ffff]
- [ 0.289332] pci 0000:00:19.0: reg 14: [mem 0xb2f3f000-0xb2f3ffff]
- [ 0.289339] pci 0000:00:19.0: reg 18: [io 0x7080-0x709f]
- [ 0.289391] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
- [ 0.289455] pci 0000:00:19.0: System wakeup disabled by ACPI
- [ 0.289484] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
- [ 0.289501] pci 0000:00:1a.0: reg 10: [mem 0xb2f3e000-0xb2f3e3ff]
- [ 0.289579] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.289656] pci 0000:00:1a.0: System wakeup disabled by ACPI
- [ 0.289709] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
- [ 0.289721] pci 0000:00:1b.0: reg 10: [mem 0xb2f34000-0xb2f37fff 64bit]
- [ 0.289776] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.289841] pci 0000:00:1b.0: System wakeup disabled by ACPI
- [ 0.289867] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
- [ 0.289921] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.289987] pci 0000:00:1c.0: System wakeup disabled by ACPI
- [ 0.290013] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
- [ 0.290067] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.290133] pci 0000:00:1c.1: System wakeup disabled by ACPI
- [ 0.290158] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
- [ 0.290212] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.290277] pci 0000:00:1c.2: System wakeup disabled by ACPI
- [ 0.290303] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
- [ 0.290358] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.290423] pci 0000:00:1c.3: System wakeup disabled by ACPI
- [ 0.290449] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
- [ 0.290510] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.290578] pci 0000:00:1c.4: System wakeup disabled by ACPI
- [ 0.290606] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
- [ 0.290668] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.290735] pci 0000:00:1c.5: System wakeup disabled by ACPI
- [ 0.290761] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
- [ 0.290823] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
- [ 0.290889] pci 0000:00:1c.6: System wakeup disabled by ACPI
- [ 0.290922] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
- [ 0.290939] pci 0000:00:1d.0: reg 10: [mem 0xb2f3d000-0xb2f3d3ff]
- [ 0.291015] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.291088] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 0.291116] pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100
- [ 0.291291] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
- [ 0.291304] pci 0000:00:1f.2: reg 10: [io 0x70a8-0x70af]
- [ 0.291310] pci 0000:00:1f.2: reg 14: [io 0x70bc-0x70bf]
- [ 0.291316] pci 0000:00:1f.2: reg 18: [io 0x70a0-0x70a7]
- [ 0.291322] pci 0000:00:1f.2: reg 1c: [io 0x70b8-0x70bb]
- [ 0.291328] pci 0000:00:1f.2: reg 20: [io 0x7060-0x707f]
- [ 0.291334] pci 0000:00:1f.2: reg 24: [mem 0xb2f3c000-0xb2f3c7ff]
- [ 0.291366] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.291450] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
- [ 0.291462] pci 0000:00:1f.3: reg 10: [mem 0xb2f3a000-0xb2f3a0ff 64bit]
- [ 0.291479] pci 0000:00:1f.3: reg 20: [io 0x7040-0x705f]
- [ 0.291602] pci 0000:00:01.0: PCI bridge to [bus 01-06]
- [ 0.291604] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
- [ 0.291605] pci 0000:00:01.0: bridge window [mem 0xb1000000-0xb1ffffff]
- [ 0.291608] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
- [ 0.291657] pci 0000:07:00.0: [10b5:8605] type 01 class 0x060400
- [ 0.291668] pci 0000:07:00.0: reg 10: [mem 0xb2e00000-0xb2e03fff]
- [ 0.291731] pci 0000:07:00.0: supports D1 D2
- [ 0.291732] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.293600] pci 0000:00:01.1: PCI bridge to [bus 07-0a]
- [ 0.293602] pci 0000:00:01.1: bridge window [mem 0xb2c00000-0xb2efffff]
- [ 0.293673] pci 0000:08:02.0: [10b5:8605] type 01 class 0x060400
- [ 0.293748] pci 0000:08:02.0: supports D1 D2
- [ 0.293748] pci 0000:08:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.293790] pci 0000:08:03.0: [10b5:8605] type 01 class 0x060400
- [ 0.293865] pci 0000:08:03.0: supports D1 D2
- [ 0.293865] pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.293920] pci 0000:07:00.0: PCI bridge to [bus 08-0a]
- [ 0.293927] pci 0000:07:00.0: bridge window [mem 0xb2c00000-0xb2dfffff]
- [ 0.294003] pci 0000:09:00.0: [1b4b:9215] type 00 class 0x010601
- [ 0.294018] pci 0000:09:00.0: reg 10: [io 0x0000-0x0007]
- [ 0.294028] pci 0000:09:00.0: reg 14: [io 0x0000-0x0003]
- [ 0.294039] pci 0000:09:00.0: reg 18: [io 0x0000-0x0007]
- [ 0.294049] pci 0000:09:00.0: reg 1c: [io 0x0000-0x0003]
- [ 0.294059] pci 0000:09:00.0: reg 20: [io 0x0000-0x001f]
- [ 0.294070] pci 0000:09:00.0: reg 24: [mem 0xb2d00000-0xb2d007ff]
- [ 0.294080] pci 0000:09:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
- [ 0.294135] pci 0000:09:00.0: PME# supported from D3hot
- [ 0.295607] pci 0000:08:02.0: PCI bridge to [bus 09]
- [ 0.295613] pci 0000:08:02.0: bridge window [mem 0xb2d00000-0xb2dfffff]
- [ 0.295692] pci 0000:0a:00.0: [1b4b:9215] type 00 class 0x010601
- [ 0.295707] pci 0000:0a:00.0: reg 10: [io 0x0000-0x0007]
- [ 0.295717] pci 0000:0a:00.0: reg 14: [io 0x0000-0x0003]
- [ 0.295727] pci 0000:0a:00.0: reg 18: [io 0x0000-0x0007]
- [ 0.295738] pci 0000:0a:00.0: reg 1c: [io 0x0000-0x0003]
- [ 0.295748] pci 0000:0a:00.0: reg 20: [io 0x0000-0x001f]
- [ 0.295759] pci 0000:0a:00.0: reg 24: [mem 0xb2c00000-0xb2c007ff]
- [ 0.295769] pci 0000:0a:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
- [ 0.295825] pci 0000:0a:00.0: PME# supported from D3hot
- [ 0.297610] pci 0000:08:03.0: PCI bridge to [bus 0a]
- [ 0.297617] pci 0000:08:03.0: bridge window [mem 0xb2c00000-0xb2cfffff]
- [ 0.297680] pci 0000:0b:00.0: [1b4b:9215] type 00 class 0x010601
- [ 0.297687] pci 0000:0b:00.0: reg 10: [io 0x0000-0x0007]
- [ 0.297692] pci 0000:0b:00.0: reg 14: [io 0x0000-0x0003]
- [ 0.297697] pci 0000:0b:00.0: reg 18: [io 0x0000-0x0007]
- [ 0.297702] pci 0000:0b:00.0: reg 1c: [io 0x0000-0x0003]
- [ 0.297707] pci 0000:0b:00.0: reg 20: [io 0x0000-0x001f]
- [ 0.297712] pci 0000:0b:00.0: reg 24: [mem 0xb2b00000-0xb2b007ff]
- [ 0.297718] pci 0000:0b:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
- [ 0.297742] pci 0000:0b:00.0: PME# supported from D3hot
- [ 0.299609] pci 0000:00:01.2: PCI bridge to [bus 0b]
- [ 0.299611] pci 0000:00:01.2: bridge window [mem 0xb2b00000-0xb2bfffff]
- [ 0.299674] pci 0000:0c:00.0: [1b4b:9215] type 00 class 0x010601
- [ 0.299687] pci 0000:0c:00.0: reg 10: [io 0x0000-0x0007]
- [ 0.299696] pci 0000:0c:00.0: reg 14: [io 0x0000-0x0003]
- [ 0.299705] pci 0000:0c:00.0: reg 18: [io 0x0000-0x0007]
- [ 0.299714] pci 0000:0c:00.0: reg 1c: [io 0x0000-0x0003]
- [ 0.299723] pci 0000:0c:00.0: reg 20: [io 0x0000-0x001f]
- [ 0.299732] pci 0000:0c:00.0: reg 24: [mem 0xb2a00000-0xb2a007ff]
- [ 0.299742] pci 0000:0c:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
- [ 0.299787] pci 0000:0c:00.0: PME# supported from D3hot
- [ 0.299806] pci 0000:0c:00.0: System wakeup disabled by ACPI
- [ 0.301616] pci 0000:00:1c.0: PCI bridge to [bus 0c]
- [ 0.301621] pci 0000:00:1c.0: bridge window [mem 0xb2a00000-0xb2afffff]
- [ 0.301684] pci 0000:0d:00.0: [1b4b:9215] type 00 class 0x010601
- [ 0.301697] pci 0000:0d:00.0: reg 10: [io 0x0000-0x0007]
- [ 0.301706] pci 0000:0d:00.0: reg 14: [io 0x0000-0x0003]
- [ 0.301715] pci 0000:0d:00.0: reg 18: [io 0x0000-0x0007]
- [ 0.301724] pci 0000:0d:00.0: reg 1c: [io 0x0000-0x0003]
- [ 0.301733] pci 0000:0d:00.0: reg 20: [io 0x0000-0x001f]
- [ 0.301743] pci 0000:0d:00.0: reg 24: [mem 0xb2900000-0xb29007ff]
- [ 0.301752] pci 0000:0d:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
- [ 0.301798] pci 0000:0d:00.0: PME# supported from D3hot
- [ 0.301817] pci 0000:0d:00.0: System wakeup disabled by ACPI
- [ 0.303620] pci 0000:00:1c.1: PCI bridge to [bus 0d]
- [ 0.303624] pci 0000:00:1c.1: bridge window [mem 0xb2900000-0xb29fffff]
- [ 0.303697] pci 0000:0e:00.0: [1b4b:9215] type 00 class 0x010601
- [ 0.303710] pci 0000:0e:00.0: reg 10: [io 0x0000-0x0007]
- [ 0.303719] pci 0000:0e:00.0: reg 14: [io 0x0000-0x0003]
- [ 0.303728] pci 0000:0e:00.0: reg 18: [io 0x0000-0x0007]
- [ 0.303737] pci 0000:0e:00.0: reg 1c: [io 0x0000-0x0003]
- [ 0.303746] pci 0000:0e:00.0: reg 20: [io 0x0000-0x001f]
- [ 0.303756] pci 0000:0e:00.0: reg 24: [mem 0xb2800000-0xb28007ff]
- [ 0.303765] pci 0000:0e:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
- [ 0.303810] pci 0000:0e:00.0: PME# supported from D3hot
- [ 0.303829] pci 0000:0e:00.0: System wakeup disabled by ACPI
- [ 0.305623] pci 0000:00:1c.2: PCI bridge to [bus 0e]
- [ 0.305628] pci 0000:00:1c.2: bridge window [mem 0xb2800000-0xb28fffff]
- [ 0.305691] pci 0000:0f:00.0: [1b4b:9215] type 00 class 0x010601
- [ 0.305703] pci 0000:0f:00.0: reg 10: [io 0x0000-0x0007]
- [ 0.305712] pci 0000:0f:00.0: reg 14: [io 0x0000-0x0003]
- [ 0.305721] pci 0000:0f:00.0: reg 18: [io 0x0000-0x0007]
- [ 0.305730] pci 0000:0f:00.0: reg 1c: [io 0x0000-0x0003]
- [ 0.305740] pci 0000:0f:00.0: reg 20: [io 0x0000-0x001f]
- [ 0.305749] pci 0000:0f:00.0: reg 24: [mem 0xb2700000-0xb27007ff]
- [ 0.305758] pci 0000:0f:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
- [ 0.305803] pci 0000:0f:00.0: PME# supported from D3hot
- [ 0.305822] pci 0000:0f:00.0: System wakeup disabled by ACPI
- [ 0.307627] pci 0000:00:1c.3: PCI bridge to [bus 0f]
- [ 0.307632] pci 0000:00:1c.3: bridge window [mem 0xb2700000-0xb27fffff]
- [ 0.307724] pci 0000:10:00.0: [8086:1533] type 00 class 0x020000
- [ 0.307747] pci 0000:10:00.0: reg 10: [mem 0xb2600000-0xb267ffff]
- [ 0.307779] pci 0000:10:00.0: reg 18: [io 0x5000-0x501f]
- [ 0.307795] pci 0000:10:00.0: reg 1c: [mem 0xb2680000-0xb2683fff]
- [ 0.307936] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
- [ 0.307967] pci 0000:10:00.0: System wakeup disabled by ACPI
- [ 0.309644] pci 0000:00:1c.4: PCI bridge to [bus 10]
- [ 0.309647] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff]
- [ 0.309650] pci 0000:00:1c.4: bridge window [mem 0xb2600000-0xb26fffff]
- [ 0.309741] pci 0000:11:00.0: [8086:1533] type 00 class 0x020000
- [ 0.309763] pci 0000:11:00.0: reg 10: [mem 0xb2500000-0xb257ffff]
- [ 0.309796] pci 0000:11:00.0: reg 18: [io 0x4000-0x401f]
- [ 0.309812] pci 0000:11:00.0: reg 1c: [mem 0xb2580000-0xb2583fff]
- [ 0.309951] pci 0000:11:00.0: PME# supported from D0 D3hot D3cold
- [ 0.309983] pci 0000:11:00.0: System wakeup disabled by ACPI
- [ 0.311647] pci 0000:00:1c.5: PCI bridge to [bus 11]
- [ 0.311650] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
- [ 0.311653] pci 0000:00:1c.5: bridge window [mem 0xb2500000-0xb25fffff]
- [ 0.311747] pci 0000:12:00.0: [8086:1533] type 00 class 0x020000
- [ 0.311770] pci 0000:12:00.0: reg 10: [mem 0xb2400000-0xb247ffff]
- [ 0.311802] pci 0000:12:00.0: reg 18: [io 0x3000-0x301f]
- [ 0.311818] pci 0000:12:00.0: reg 1c: [mem 0xb2480000-0xb2483fff]
- [ 0.311954] pci 0000:12:00.0: PME# supported from D0 D3hot D3cold
- [ 0.311986] pci 0000:12:00.0: System wakeup disabled by ACPI
- [ 0.313651] pci 0000:00:1c.6: PCI bridge to [bus 12]
- [ 0.313654] pci 0000:00:1c.6: bridge window [io 0x3000-0x3fff]
- [ 0.313657] pci 0000:00:1c.6: bridge window [mem 0xb2400000-0xb24fffff]
- [ 0.313689] pci_bus 0000:00: on NUMA node 0
- [ 0.313742] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
- [ 0.314019] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
- [ 0.314540] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
- [ 0.314571] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
- [ 0.314600] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 0.314632] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 0.314662] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
- [ 0.314691] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 0.314720] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *7
- [ 0.314749] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
- [ 0.315028] ACPI: Enabled 6 GPEs in block 00 to 3F
- [ 0.315032] acpi root: \_SB_.PCI0 notify handler is installed
- [ 0.315075] Found 1 acpi root devices
- [ 0.315147] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.315150] vgaarb: loaded
- [ 0.315151] vgaarb: bridge control possible 0000:00:02.0
- [ 0.315226] SCSI subsystem initialized
- [ 0.315227] ACPI: bus type ATA registered
- [ 0.315273] libata version 3.00 loaded.
- [ 0.315354] pps_core: LinuxPPS API ver. 1 registered
- [ 0.315355] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.315366] PTP clock support registered
- [ 0.315413] PCI: Using ACPI for IRQ routing
- [ 0.320188] PCI: pci_cache_line_size set to 64 bytes
- [ 0.320260] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
- [ 0.320261] e820: reserve RAM buffer [mem 0x9ac1d000-0x9bffffff]
- [ 0.320262] e820: reserve RAM buffer [mem 0x9ad7f000-0x9bffffff]
- [ 0.320263] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
- [ 0.320263] e820: reserve RAM buffer [mem 0x45e600000-0x45fffffff]
- [ 0.320364] Switching to clocksource hpet
- [ 0.320423] AppArmor: AppArmor Filesystem Enabled
- [ 0.320445] pnp: PnP ACPI init
- [ 0.320448] ACPI: bus type PNP registered
- [ 0.320472] pnp 00:00: [dma 4]
- [ 0.320496] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.320520] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.320590] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.320629] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.320700] system 00:04: [io 0x0680-0x069f] has been reserved
- [ 0.320701] system 00:04: [io 0xffff] has been reserved
- [ 0.320702] system 00:04: [io 0xffff] has been reserved
- [ 0.320703] system 00:04: [io 0xffff] has been reserved
- [ 0.320704] system 00:04: [io 0x1800-0x18fe] has been reserved
- [ 0.320705] system 00:04: [io 0x164e-0x164f] has been reserved
- [ 0.320707] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.320751] system 00:05: [io 0x0800-0x087f] has been reserved
- [ 0.320752] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.320784] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.320825] system 00:07: [io 0x1854-0x1857] has been reserved
- [ 0.320826] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.321010] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.321153] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.321247] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.321248] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 0.321249] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.321250] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.321252] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.321253] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.321254] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 0.321255] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
- [ 0.321256] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.321257] system 00:0a: [mem 0x9fa20000-0x9fa20fff] has been reserved
- [ 0.321258] system 00:0a: [mem 0x9fa10000-0x9fa1ffff] has been reserved
- [ 0.321259] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.321600] pnp: PnP ACPI: found 11 devices
- [ 0.321601] ACPI: bus type PNP unregistered
- [ 0.328786] pci 0000:09:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
- [ 0.328788] pci 0000:0a:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
- [ 0.328789] pci 0000:0b:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
- [ 0.328790] pci 0000:0c:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
- [ 0.328791] pci 0000:0d:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
- [ 0.328791] pci 0000:0e:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
- [ 0.328792] pci 0000:0f:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
- [ 0.328803] pci 0000:08:02.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 09] add_size 200000
- [ 0.328817] pci 0000:08:02.0: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
- [ 0.328818] pci 0000:07:00.0: bridge window [mem 0x00100000-0x002fffff pref] to [bus 08-0a] add_size 200000
- [ 0.328821] pci 0000:07:00.0: res[9]=[mem 0x00100000-0x002fffff pref] get_res_add_size add_size 200000
- [ 0.328822] pci 0000:00:01.1: bridge window [mem 0x00100000-0x002fffff pref] to [bus 07-0a] add_size 200000
- [ 0.328860] pci 0000:00:01.1: res[9]=[mem 0x00100000-0x002fffff pref] get_res_add_size add_size 200000
- [ 0.328862] pci 0000:00:01.1: BAR 9: assigned [mem 0x9fb00000-0x9fefffff pref]
- [ 0.328864] pci 0000:00:01.2: BAR 9: assigned [mem 0x9ff00000-0x9fffffff pref]
- [ 0.328865] pci 0000:00:1c.0: BAR 9: assigned [mem 0xb3000000-0xb30fffff pref]
- [ 0.328867] pci 0000:00:1c.1: BAR 9: assigned [mem 0xb3100000-0xb31fffff pref]
- [ 0.328868] pci 0000:00:1c.2: BAR 9: assigned [mem 0xb3200000-0xb32fffff pref]
- [ 0.328869] pci 0000:00:1c.3: BAR 9: assigned [mem 0xb3300000-0xb33fffff pref]
- [ 0.328871] pci 0000:00:01.1: BAR 7: assigned [io 0x8000-0x9fff]
- [ 0.328872] pci 0000:00:01.2: BAR 7: assigned [io 0x2000-0x2fff]
- [ 0.328873] pci 0000:00:1c.0: BAR 7: assigned [io 0xa000-0xafff]
- [ 0.328874] pci 0000:00:1c.1: BAR 7: assigned [io 0xb000-0xbfff]
- [ 0.328875] pci 0000:00:1c.2: BAR 7: assigned [io 0xc000-0xcfff]
- [ 0.328876] pci 0000:00:1c.3: BAR 7: assigned [io 0xd000-0xdfff]
- [ 0.328878] pci 0000:00:01.0: PCI bridge to [bus 01-06]
- [ 0.328879] pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
- [ 0.328881] pci 0000:00:01.0: bridge window [mem 0xb1000000-0xb1ffffff]
- [ 0.328883] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
- [ 0.328885] pci 0000:07:00.0: res[9]=[mem 0x00100000-0x002fffff pref] get_res_add_size add_size 200000
- [ 0.328887] pci 0000:07:00.0: BAR 9: assigned [mem 0x9fb00000-0x9fefffff pref]
- [ 0.328888] pci 0000:07:00.0: BAR 7: assigned [io 0x8000-0x9fff]
- [ 0.328889] pci 0000:08:02.0: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
- [ 0.328890] pci 0000:08:02.0: BAR 9: assigned [mem 0x9fb00000-0x9fdfffff pref]
- [ 0.328891] pci 0000:08:03.0: BAR 9: assigned [mem 0x9fe00000-0x9fefffff pref]
- [ 0.328892] pci 0000:08:02.0: BAR 7: assigned [io 0x8000-0x8fff]
- [ 0.328893] pci 0000:08:03.0: BAR 7: assigned [io 0x9000-0x9fff]
- [ 0.328894] pci 0000:09:00.0: BAR 6: assigned [mem 0x9fb00000-0x9fb0ffff pref]
- [ 0.328895] pci 0000:09:00.0: BAR 4: assigned [io 0x8000-0x801f]
- [ 0.328899] pci 0000:09:00.0: BAR 0: assigned [io 0x8020-0x8027]
- [ 0.328903] pci 0000:09:00.0: BAR 2: assigned [io 0x8028-0x802f]
- [ 0.328906] pci 0000:09:00.0: BAR 1: assigned [io 0x8030-0x8033]
- [ 0.328910] pci 0000:09:00.0: BAR 3: assigned [io 0x8034-0x8037]
- [ 0.328914] pci 0000:08:02.0: PCI bridge to [bus 09]
- [ 0.328915] pci 0000:08:02.0: bridge window [io 0x8000-0x8fff]
- [ 0.328919] pci 0000:08:02.0: bridge window [mem 0xb2d00000-0xb2dfffff]
- [ 0.328922] pci 0000:08:02.0: bridge window [mem 0x9fb00000-0x9fdfffff pref]
- [ 0.328927] pci 0000:0a:00.0: BAR 6: assigned [mem 0x9fe00000-0x9fe0ffff pref]
- [ 0.328928] pci 0000:0a:00.0: BAR 4: assigned [io 0x9000-0x901f]
- [ 0.328932] pci 0000:0a:00.0: BAR 0: assigned [io 0x9020-0x9027]
- [ 0.328936] pci 0000:0a:00.0: BAR 2: assigned [io 0x9028-0x902f]
- [ 0.328939] pci 0000:0a:00.0: BAR 1: assigned [io 0x9030-0x9033]
- [ 0.328943] pci 0000:0a:00.0: BAR 3: assigned [io 0x9034-0x9037]
- [ 0.328947] pci 0000:08:03.0: PCI bridge to [bus 0a]
- [ 0.328948] pci 0000:08:03.0: bridge window [io 0x9000-0x9fff]
- [ 0.328952] pci 0000:08:03.0: bridge window [mem 0xb2c00000-0xb2cfffff]
- [ 0.328955] pci 0000:08:03.0: bridge window [mem 0x9fe00000-0x9fefffff pref]
- [ 0.328960] pci 0000:07:00.0: PCI bridge to [bus 08-0a]
- [ 0.328962] pci 0000:07:00.0: bridge window [io 0x8000-0x9fff]
- [ 0.328966] pci 0000:07:00.0: bridge window [mem 0xb2c00000-0xb2dfffff]
- [ 0.328969] pci 0000:07:00.0: bridge window [mem 0x9fb00000-0x9fefffff pref]
- [ 0.328973] pci 0000:00:01.1: PCI bridge to [bus 07-0a]
- [ 0.328974] pci 0000:00:01.1: bridge window [io 0x8000-0x9fff]
- [ 0.328976] pci 0000:00:01.1: bridge window [mem 0xb2c00000-0xb2efffff]
- [ 0.328978] pci 0000:00:01.1: bridge window [mem 0x9fb00000-0x9fefffff pref]
- [ 0.328980] pci 0000:0b:00.0: BAR 6: assigned [mem 0x9ff00000-0x9ff0ffff pref]
- [ 0.328981] pci 0000:0b:00.0: BAR 4: assigned [io 0x2000-0x201f]
- [ 0.328983] pci 0000:0b:00.0: BAR 0: assigned [io 0x2020-0x2027]
- [ 0.328985] pci 0000:0b:00.0: BAR 2: assigned [io 0x2028-0x202f]
- [ 0.328988] pci 0000:0b:00.0: BAR 1: assigned [io 0x2030-0x2033]
- [ 0.328990] pci 0000:0b:00.0: BAR 3: assigned [io 0x2034-0x2037]
- [ 0.328992] pci 0000:00:01.2: PCI bridge to [bus 0b]
- [ 0.328993] pci 0000:00:01.2: bridge window [io 0x2000-0x2fff]
- [ 0.328995] pci 0000:00:01.2: bridge window [mem 0xb2b00000-0xb2bfffff]
- [ 0.328996] pci 0000:00:01.2: bridge window [mem 0x9ff00000-0x9fffffff pref]
- [ 0.328999] pci 0000:0c:00.0: BAR 6: assigned [mem 0xb3000000-0xb300ffff pref]
- [ 0.329000] pci 0000:0c:00.0: BAR 4: assigned [io 0xa000-0xa01f]
- [ 0.329003] pci 0000:0c:00.0: BAR 0: assigned [io 0xa020-0xa027]
- [ 0.329007] pci 0000:0c:00.0: BAR 2: assigned [io 0xa028-0xa02f]
- [ 0.329011] pci 0000:0c:00.0: BAR 1: assigned [io 0xa030-0xa033]
- [ 0.329014] pci 0000:0c:00.0: BAR 3: assigned [io 0xa034-0xa037]
- [ 0.329018] pci 0000:00:1c.0: PCI bridge to [bus 0c]
- [ 0.329020] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff]
- [ 0.329024] pci 0000:00:1c.0: bridge window [mem 0xb2a00000-0xb2afffff]
- [ 0.329026] pci 0000:00:1c.0: bridge window [mem 0xb3000000-0xb30fffff pref]
- [ 0.329031] pci 0000:0d:00.0: BAR 6: assigned [mem 0xb3100000-0xb310ffff pref]
- [ 0.329032] pci 0000:0d:00.0: BAR 4: assigned [io 0xb000-0xb01f]
- [ 0.329036] pci 0000:0d:00.0: BAR 0: assigned [io 0xb020-0xb027]
- [ 0.329040] pci 0000:0d:00.0: BAR 2: assigned [io 0xb028-0xb02f]
- [ 0.329043] pci 0000:0d:00.0: BAR 1: assigned [io 0xb030-0xb033]
- [ 0.329047] pci 0000:0d:00.0: BAR 3: assigned [io 0xb034-0xb037]
- [ 0.329050] pci 0000:00:1c.1: PCI bridge to [bus 0d]
- [ 0.329053] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
- [ 0.329057] pci 0000:00:1c.1: bridge window [mem 0xb2900000-0xb29fffff]
- [ 0.329059] pci 0000:00:1c.1: bridge window [mem 0xb3100000-0xb31fffff pref]
- [ 0.329064] pci 0000:0e:00.0: BAR 6: assigned [mem 0xb3200000-0xb320ffff pref]
- [ 0.329065] pci 0000:0e:00.0: BAR 4: assigned [io 0xc000-0xc01f]
- [ 0.329069] pci 0000:0e:00.0: BAR 0: assigned [io 0xc020-0xc027]
- [ 0.329072] pci 0000:0e:00.0: BAR 2: assigned [io 0xc028-0xc02f]
- [ 0.329076] pci 0000:0e:00.0: BAR 1: assigned [io 0xc030-0xc033]
- [ 0.329080] pci 0000:0e:00.0: BAR 3: assigned [io 0xc034-0xc037]
- [ 0.329083] pci 0000:00:1c.2: PCI bridge to [bus 0e]
- [ 0.329085] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
- [ 0.329089] pci 0000:00:1c.2: bridge window [mem 0xb2800000-0xb28fffff]
- [ 0.329092] pci 0000:00:1c.2: bridge window [mem 0xb3200000-0xb32fffff pref]
- [ 0.329097] pci 0000:0f:00.0: BAR 6: assigned [mem 0xb3300000-0xb330ffff pref]
- [ 0.329098] pci 0000:0f:00.0: BAR 4: assigned [io 0xd000-0xd01f]
- [ 0.329101] pci 0000:0f:00.0: BAR 0: assigned [io 0xd020-0xd027]
- [ 0.329105] pci 0000:0f:00.0: BAR 2: assigned [io 0xd028-0xd02f]
- [ 0.329109] pci 0000:0f:00.0: BAR 1: assigned [io 0xd030-0xd033]
- [ 0.329112] pci 0000:0f:00.0: BAR 3: assigned [io 0xd034-0xd037]
- [ 0.329115] pci 0000:00:1c.3: PCI bridge to [bus 0f]
- [ 0.329118] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
- [ 0.329121] pci 0000:00:1c.3: bridge window [mem 0xb2700000-0xb27fffff]
- [ 0.329124] pci 0000:00:1c.3: bridge window [mem 0xb3300000-0xb33fffff pref]
- [ 0.329129] pci 0000:00:1c.4: PCI bridge to [bus 10]
- [ 0.329131] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff]
- [ 0.329135] pci 0000:00:1c.4: bridge window [mem 0xb2600000-0xb26fffff]
- [ 0.329141] pci 0000:00:1c.5: PCI bridge to [bus 11]
- [ 0.329143] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
- [ 0.329147] pci 0000:00:1c.5: bridge window [mem 0xb2500000-0xb25fffff]
- [ 0.329152] pci 0000:00:1c.6: PCI bridge to [bus 12]
- [ 0.329155] pci 0000:00:1c.6: bridge window [io 0x3000-0x3fff]
- [ 0.329158] pci 0000:00:1c.6: bridge window [mem 0xb2400000-0xb24fffff]
- [ 0.329613] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.329614] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.329615] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.329616] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
- [ 0.329617] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff]
- [ 0.329618] pci_bus 0000:01: resource 1 [mem 0xb1000000-0xb1ffffff]
- [ 0.329618] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xb0ffffff 64bit pref]
- [ 0.329619] pci_bus 0000:07: resource 0 [io 0x8000-0x9fff]
- [ 0.329620] pci_bus 0000:07: resource 1 [mem 0xb2c00000-0xb2efffff]
- [ 0.329621] pci_bus 0000:07: resource 2 [mem 0x9fb00000-0x9fefffff pref]
- [ 0.329622] pci_bus 0000:08: resource 0 [io 0x8000-0x9fff]
- [ 0.329623] pci_bus 0000:08: resource 1 [mem 0xb2c00000-0xb2dfffff]
- [ 0.329624] pci_bus 0000:08: resource 2 [mem 0x9fb00000-0x9fefffff pref]
- [ 0.329624] pci_bus 0000:09: resource 0 [io 0x8000-0x8fff]
- [ 0.329625] pci_bus 0000:09: resource 1 [mem 0xb2d00000-0xb2dfffff]
- [ 0.329626] pci_bus 0000:09: resource 2 [mem 0x9fb00000-0x9fdfffff pref]
- [ 0.329627] pci_bus 0000:0a: resource 0 [io 0x9000-0x9fff]
- [ 0.329628] pci_bus 0000:0a: resource 1 [mem 0xb2c00000-0xb2cfffff]
- [ 0.329629] pci_bus 0000:0a: resource 2 [mem 0x9fe00000-0x9fefffff pref]
- [ 0.329629] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
- [ 0.329630] pci_bus 0000:0b: resource 1 [mem 0xb2b00000-0xb2bfffff]
- [ 0.329631] pci_bus 0000:0b: resource 2 [mem 0x9ff00000-0x9fffffff pref]
- [ 0.329632] pci_bus 0000:0c: resource 0 [io 0xa000-0xafff]
- [ 0.329633] pci_bus 0000:0c: resource 1 [mem 0xb2a00000-0xb2afffff]
- [ 0.329634] pci_bus 0000:0c: resource 2 [mem 0xb3000000-0xb30fffff pref]
- [ 0.329635] pci_bus 0000:0d: resource 0 [io 0xb000-0xbfff]
- [ 0.329635] pci_bus 0000:0d: resource 1 [mem 0xb2900000-0xb29fffff]
- [ 0.329636] pci_bus 0000:0d: resource 2 [mem 0xb3100000-0xb31fffff pref]
- [ 0.329637] pci_bus 0000:0e: resource 0 [io 0xc000-0xcfff]
- [ 0.329638] pci_bus 0000:0e: resource 1 [mem 0xb2800000-0xb28fffff]
- [ 0.329639] pci_bus 0000:0e: resource 2 [mem 0xb3200000-0xb32fffff pref]
- [ 0.329639] pci_bus 0000:0f: resource 0 [io 0xd000-0xdfff]
- [ 0.329640] pci_bus 0000:0f: resource 1 [mem 0xb2700000-0xb27fffff]
- [ 0.329641] pci_bus 0000:0f: resource 2 [mem 0xb3300000-0xb33fffff pref]
- [ 0.329642] pci_bus 0000:10: resource 0 [io 0x5000-0x5fff]
- [ 0.329643] pci_bus 0000:10: resource 1 [mem 0xb2600000-0xb26fffff]
- [ 0.329644] pci_bus 0000:11: resource 0 [io 0x4000-0x4fff]
- [ 0.329645] pci_bus 0000:11: resource 1 [mem 0xb2500000-0xb25fffff]
- [ 0.329645] pci_bus 0000:12: resource 0 [io 0x3000-0x3fff]
- [ 0.329646] pci_bus 0000:12: resource 1 [mem 0xb2400000-0xb24fffff]
- [ 0.329718] NET: Registered protocol family 2
- [ 0.329856] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
- [ 0.330015] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.330102] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.330111] TCP: reno registered
- [ 0.330113] UDP hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.330138] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
- [ 0.330211] NET: Registered protocol family 1
- [ 0.330302] RPC: Registered named UNIX socket transport module.
- [ 0.330302] RPC: Registered udp transport module.
- [ 0.330303] RPC: Registered tcp transport module.
- [ 0.330303] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.330309] pci 0000:00:02.0: Boot video device
- [ 0.330311] pci 0000:00:14.0: Lynx Point XHCI quirks: Set power state to D0
- [ 0.353425] pci 0000:09:00.0: Apply mv9235 specific programming steps
- [ 0.353431] pci 0000:0a:00.0: Apply mv9235 specific programming steps
- [ 0.353436] pci 0000:0b:00.0: Apply mv9235 specific programming steps
- [ 0.353441] pci 0000:0c:00.0: Apply mv9235 specific programming steps
- [ 0.353445] pci 0000:0d:00.0: Apply mv9235 specific programming steps
- [ 0.353450] pci 0000:0e:00.0: Apply mv9235 specific programming steps
- [ 0.353454] pci 0000:0f:00.0: Apply mv9235 specific programming steps
- [ 0.353466] PCI: CLS 64 bytes, default 64
- [ 0.380143] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.380146] software IO TLB [mem 0x96c1d000-0x9ac1d000] (64MB) mapped at [ffff880096c1d000-ffff88009ac1cfff]
- [ 0.380180] Simple Boot Flag at 0x44 set to 0x1
- [ 0.383798] audit: initializing netlink socket (disabled)
- [ 0.383809] type=2000 audit(1476577850.364:1): initialized
- [ 0.384881] bounce pool size: 64 pages
- [ 0.384985] VFS: Disk quotas dquot_6.5.2
- [ 0.385005] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.385323] NFS: Registering the id_resolver key type
- [ 0.385332] Key type id_resolver registered
- [ 0.385333] Key type id_legacy registered
- [ 0.385340] msgmni has been set to 31792
- [ 0.385503] async_tx: api initialized (async)
- [ 0.385560] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 0.385562] io scheduler noop registered
- [ 0.385563] io scheduler deadline registered (default)
- [ 0.385575] io scheduler cfq registered
- [ 0.385824] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
- [ 0.385957] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
- [ 0.386080] pcieport 0000:00:01.2: irq 42 for MSI/MSI-X
- [ 0.386469] pcieport 0000:00:1c.0: irq 43 for MSI/MSI-X
- [ 0.386620] pcieport 0000:00:1c.1: irq 44 for MSI/MSI-X
- [ 0.386937] pcieport 0000:00:1c.2: irq 45 for MSI/MSI-X
- [ 0.387032] pcieport 0000:00:1c.3: irq 46 for MSI/MSI-X
- [ 0.387119] pcieport 0000:00:1c.4: irq 47 for MSI/MSI-X
- [ 0.387214] pcieport 0000:00:1c.5: irq 48 for MSI/MSI-X
- [ 0.387580] pcieport 0000:00:1c.6: irq 49 for MSI/MSI-X
- [ 0.387687] pcieport 0000:07:00.0: irq 50 for MSI/MSI-X
- [ 0.388004] pcieport 0000:08:02.0: irq 51 for MSI/MSI-X
- [ 0.388648] pcieport 0000:08:03.0: irq 52 for MSI/MSI-X
- [ 0.389585] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.390870] vesafb: mode is 1024x768x8, linelength=1024, pages=84
- [ 0.390871] vesafb: scrolling: redraw
- [ 0.390873] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
- [ 0.390987] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90010100000, using 1536k, total 65472k
- [ 0.403453] Console: switching to colour frame buffer device 128x48
- [ 0.415448] fb0: VESA VGA frame buffer device
- [ 0.415587] vga16fb: initializing
- [ 0.415589] vga16fb: mapped to 0xffff8800000a0000
- [ 0.415592] checking generic (a0000000 3ff0000) vs hw (a0000 10000)
- [ 0.415660] fb1: VGA16 VGA frame buffer device
- [ 0.415669] intel_idle: MWAIT substates: 0x42120
- [ 0.415670] intel_idle: v0.4 model 0x3C
- [ 0.415671] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 0.512191] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.533034] serial8250: ttyS0 at I/O 0x2f8 (irq = 3) is a 16550A
- [ 0.553676] serial8250: ttyS1 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.574413] 0000:00:16.3: ttyS2 at I/O 0x70b0 (irq = 19) is a 16550A
- [ 0.583846] brd: module loaded
- [ 0.584310] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
- [ 0.584315] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 0.584319] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20130328/utaddress-251)
- [ 0.584321] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20130328/utaddress-251)
- [ 0.584324] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 0.584324] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20130328/utaddress-251)
- [ 0.584326] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20130328/utaddress-251)
- [ 0.584329] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20130328/utaddress-251)
- [ 0.584331] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 0.584332] lpc_ich: Resource conflict(s) found affecting gpio_ich
- [ 0.584952] Loading iSCSI transport class v2.0-870.
- [ 0.589698] rdac: device handler registered
- [ 0.589905] mpt2sas version 14.100.00.00 loaded
- [ 0.591125] SCSI Media Changer driver v0.25
- [ 0.591820] ahci 0000:00:1f.2: version 3.0
- [ 0.591945] ahci 0000:00:1f.2: irq 53 for MSI/MSI-X
- [ 0.591999] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
- [ 0.592002] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
- [ 0.592006] ahci 0000:00:1f.2: setting latency timer to 64
- [ 0.603856] scsi0 : ahci
- [ 0.604312] scsi1 : ahci
- [ 0.604739] scsi2 : ahci
- [ 0.605174] scsi3 : ahci
- [ 0.605409] scsi4 : ahci
- [ 0.605701] scsi5 : ahci
- [ 0.605836] ata1: SATA max UDMA/133 abar m2048@0xb2f3c000 port 0xb2f3c100 irq 53
- [ 0.605839] ata2: SATA max UDMA/133 abar m2048@0xb2f3c000 port 0xb2f3c180 irq 53
- [ 0.605842] ata3: SATA max UDMA/133 abar m2048@0xb2f3c000 port 0xb2f3c200 irq 53
- [ 0.605845] ata4: SATA max UDMA/133 abar m2048@0xb2f3c000 port 0xb2f3c280 irq 53
- [ 0.605847] ata5: SATA max UDMA/133 abar m2048@0xb2f3c000 port 0xb2f3c300 irq 53
- [ 0.605849] ata6: SATA max UDMA/133 abar m2048@0xb2f3c000 port 0xb2f3c380 irq 53
- [ 0.605941] ahci 0000:09:00.0: irq 54 for MSI/MSI-X
- [ 0.605971] ahci: SSS flag set, parallel bus scan disabled
- [ 0.616164] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
- [ 0.616166] ahci 0000:09:00.0: flags: 64bit ncq sntf stag led only pmp fbs pio slum part sxs
- [ 0.617715] scsi6 : ahci
- [ 0.618048] scsi7 : ahci
- [ 0.618488] scsi8 : ahci
- [ 0.618983] scsi9 : ahci
- [ 0.619379] ata7: SATA max UDMA/133 abar m2048@0xb2d00000 port 0xb2d00100 irq 54
- [ 0.619383] ata8: SATA max UDMA/133 abar m2048@0xb2d00000 port 0xb2d00180 irq 54
- [ 0.619385] ata9: SATA max UDMA/133 abar m2048@0xb2d00000 port 0xb2d00200 irq 54
- [ 0.619388] ata10: SATA max UDMA/133 abar m2048@0xb2d00000 port 0xb2d00280 irq 54
- [ 0.619472] ahci 0000:0a:00.0: irq 55 for MSI/MSI-X
- [ 0.619506] ahci: SSS flag set, parallel bus scan disabled
- [ 0.630148] ahci 0000:0a:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
- [ 0.630150] ahci 0000:0a:00.0: flags: 64bit ncq sntf stag led only pmp fbs pio slum part sxs
- [ 0.631183] scsi10 : ahci
- [ 0.632378] scsi11 : ahci
- [ 0.632700] scsi12 : ahci
- [ 0.633244] scsi13 : ahci
- [ 0.633364] ata11: SATA max UDMA/133 abar m2048@0xb2c00000 port 0xb2c00100 irq 55
- [ 0.633367] ata12: SATA max UDMA/133 abar m2048@0xb2c00000 port 0xb2c00180 irq 55
- [ 0.633370] ata13: SATA max UDMA/133 abar m2048@0xb2c00000 port 0xb2c00200 irq 55
- [ 0.633372] ata14: SATA max UDMA/133 abar m2048@0xb2c00000 port 0xb2c00280 irq 55
- [ 0.633446] ahci 0000:0b:00.0: irq 56 for MSI/MSI-X
- [ 0.633464] ahci: SSS flag set, parallel bus scan disabled
- [ 0.644118] ahci 0000:0b:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
- [ 0.644121] ahci 0000:0b:00.0: flags: 64bit ncq sntf stag led only pmp fbs pio slum part sxs
- [ 0.645357] scsi14 : ahci
- [ 0.645694] scsi15 : ahci
- [ 0.646222] scsi16 : ahci
- [ 0.646954] scsi17 : ahci
- [ 0.647146] ata15: SATA max UDMA/133 abar m2048@0xb2b00000 port 0xb2b00100 irq 56
- [ 0.647148] ata16: SATA max UDMA/133 abar m2048@0xb2b00000 port 0xb2b00180 irq 56
- [ 0.647150] ata17: SATA max UDMA/133 abar m2048@0xb2b00000 port 0xb2b00200 irq 56
- [ 0.647152] ata18: SATA max UDMA/133 abar m2048@0xb2b00000 port 0xb2b00280 irq 56
- [ 0.647232] ahci 0000:0c:00.0: irq 57 for MSI/MSI-X
- [ 0.647253] ahci: SSS flag set, parallel bus scan disabled
- [ 0.658125] ahci 0000:0c:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
- [ 0.658127] ahci 0000:0c:00.0: flags: 64bit ncq sntf stag led only pmp fbs pio slum part sxs
- [ 0.659510] scsi18 : ahci
- [ 0.660079] scsi19 : ahci
- [ 0.660540] scsi20 : ahci
- [ 0.661033] scsi21 : ahci
- [ 0.661456] ata19: SATA max UDMA/133 abar m2048@0xb2a00000 port 0xb2a00100 irq 57
- [ 0.661460] ata20: SATA max UDMA/133 abar m2048@0xb2a00000 port 0xb2a00180 irq 57
- [ 0.661463] ata21: SATA max UDMA/133 abar m2048@0xb2a00000 port 0xb2a00200 irq 57
- [ 0.661465] ata22: SATA max UDMA/133 abar m2048@0xb2a00000 port 0xb2a00280 irq 57
- [ 0.661541] ahci 0000:0d:00.0: irq 58 for MSI/MSI-X
- [ 0.661562] ahci: SSS flag set, parallel bus scan disabled
- [ 0.672108] ahci 0000:0d:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
- [ 0.672111] ahci 0000:0d:00.0: flags: 64bit ncq sntf stag led only pmp fbs pio slum part sxs
- [ 0.673411] scsi22 : ahci
- [ 0.674115] scsi23 : ahci
- [ 0.674765] scsi24 : ahci
- [ 0.675136] scsi25 : ahci
- [ 0.675252] ata23: SATA max UDMA/133 abar m2048@0xb2900000 port 0xb2900100 irq 58
- [ 0.675256] ata24: SATA max UDMA/133 abar m2048@0xb2900000 port 0xb2900180 irq 58
- [ 0.675258] ata25: SATA max UDMA/133 abar m2048@0xb2900000 port 0xb2900200 irq 58
- [ 0.675261] ata26: SATA max UDMA/133 abar m2048@0xb2900000 port 0xb2900280 irq 58
- [ 0.675344] ahci 0000:0e:00.0: irq 59 for MSI/MSI-X
- [ 0.675365] ahci: SSS flag set, parallel bus scan disabled
- [ 0.686096] ahci 0000:0e:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
- [ 0.686098] ahci 0000:0e:00.0: flags: 64bit ncq sntf stag led only pmp fbs pio slum part sxs
- [ 0.687359] scsi26 : ahci
- [ 0.688373] scsi27 : ahci
- [ 0.688680] scsi28 : ahci
- [ 0.688816] scsi29 : ahci
- [ 0.689075] ata27: SATA max UDMA/133 abar m2048@0xb2800000 port 0xb2800100 irq 59
- [ 0.689079] ata28: SATA max UDMA/133 abar m2048@0xb2800000 port 0xb2800180 irq 59
- [ 0.689082] ata29: SATA max UDMA/133 abar m2048@0xb2800000 port 0xb2800200 irq 59
- [ 0.689084] ata30: SATA max UDMA/133 abar m2048@0xb2800000 port 0xb2800280 irq 59
- [ 0.689168] ahci 0000:0f:00.0: irq 60 for MSI/MSI-X
- [ 0.689194] ahci: SSS flag set, parallel bus scan disabled
- [ 0.700085] ahci 0000:0f:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
- [ 0.700087] ahci 0000:0f:00.0: flags: 64bit ncq sntf stag led only pmp fbs pio slum part sxs
- [ 0.701357] scsi30 : ahci
- [ 0.702129] scsi31 : ahci
- [ 0.702736] scsi32 : ahci
- [ 0.702919] scsi33 : ahci
- [ 0.703220] ata31: SATA max UDMA/133 abar m2048@0xb2700000 port 0xb2700100 irq 60
- [ 0.703224] ata32: SATA max UDMA/133 abar m2048@0xb2700000 port 0xb2700180 irq 60
- [ 0.703226] ata33: SATA max UDMA/133 abar m2048@0xb2700000 port 0xb2700200 irq 60
- [ 0.703229] ata34: SATA max UDMA/133 abar m2048@0xb2700000 port 0xb2700280 irq 60
- [ 0.704774] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 0.705165] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.705169] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.706594] rtc_cmos 00:06: RTC can wake from S4
- [ 0.706767] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
- [ 0.706789] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
- [ 0.706833] i2c /dev entries driver
- [ 0.707436] md: linear personality registered for level -1
- [ 0.707438] md: raid0 personality registered for level 0
- [ 0.707439] md: raid1 personality registered for level 1
- [ 0.707440] md: raid10 personality registered for level 10
- [ 0.707441] md: raid6 personality registered for level 6
- [ 0.707442] md: raid5 personality registered for level 5
- [ 0.707443] md: raid4 personality registered for level 4
- [ 0.707526] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- [ 0.707529] Intel P-state driver initializing.
- [ 0.707538] Intel pstate controlling: cpu 0
- [ 0.707548] Intel pstate controlling: cpu 1
- [ 0.707557] Intel pstate controlling: cpu 2
- [ 0.707569] Intel pstate controlling: cpu 3
- [ 0.707576] Intel pstate controlling: cpu 4
- [ 0.707585] Intel pstate controlling: cpu 5
- [ 0.707592] Intel pstate controlling: cpu 6
- [ 0.707600] Intel pstate controlling: cpu 7
- [ 0.707756] cpuidle: using governor ladder
- [ 0.707885] cpuidle: using governor menu
- [ 0.707938] TCP: cubic registered
- [ 0.707939] NET: Registered protocol family 17
- [ 0.707953] Key type dns_resolver registered
- [ 0.909928] ata1: SATA link down (SStatus 0 SControl 300)
- [ 0.909947] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 0.910924] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 0.910939] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 0.910953] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 0.910969] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 0.911487] ata5.00: ATA-9: WDC WD30EZRZ-00WN9B0, 80.00A80, max UDMA/133
- [ 0.911489] ata5.00: 5860467633 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 0.911543] ata2.00: supports DRM functions and may not be fully accessible
- [ 0.911600] ata2.00: ATA-9: Samsung SSD 850 EVO mSATA 250GB, EMT41B6Q, max UDMA/133
- [ 0.911612] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
- [ 0.911774] ata3.00: ATA-9: ST4000DM000-1F2168, CC54, max UDMA/133
- [ 0.911775] ata3.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 0.911865] ata6.00: ATA-9: ST3000DM001-1ER166, CC46, max UDMA/133
- [ 0.911866] ata6.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 0.911985] ata5.00: configured for UDMA/133
- [ 0.912148] ata2.00: supports DRM functions and may not be fully accessible
- [ 0.912345] ata4.00: ATA-8: TOSHIBA DT01ABA300, MZ6OABB0, max UDMA/133
- [ 0.912347] ata4.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 0.912353] ata2.00: configured for UDMA/133
- [ 0.912362] ata2.00: Find SSD disks. [Samsung SSD 850 EVO mSATA 250GB]
- [ 0.912563] scsi 1:0:0:0: Direct-Access Samsung SSD 850 EVO mSATA 250GB EMT4 PQ: 0 ANSI: 5
- [ 0.912643] ata3.00: configured for UDMA/133
- [ 0.912852] ata6.00: configured for UDMA/133
- [ 0.912958] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
- [ 0.913019] sd 1:0:0:0: [sdb] Write Protect is off
- [ 0.913021] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 0.913044] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.913445] sdb: sdb1 sdb2 sdb3 < sdb5 >
- [ 0.913733] ata4.00: configured for UDMA/133
- [ 0.914148] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 0.937055] scsi 2:0:0:0: Direct-Access ATA ST4000DM000-1F2168 CC54 PQ: 0 ANSI: 5
- [ 0.937484] sd 2:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
- [ 0.937486] sd 2:0:0:0: [sdc] 4096-byte physical blocks
- [ 0.937531] sd 2:0:0:0: [sdc] Write Protect is off
- [ 0.937532] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 0.937548] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.938694] scsi 3:0:0:0: Direct-Access TOSHIBA DT01ABA300 MZ6O PQ: 0 ANSI: 5
- [ 0.938917] sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
- [ 0.938919] sd 3:0:0:0: [sdd] 4096-byte physical blocks
- [ 0.938963] sd 3:0:0:0: [sdd] Write Protect is off
- [ 0.938965] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
- [ 0.938983] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.939442] scsi 4:0:0:0: Direct-Access WDC WD30EZRZ-00WN9B0 80.0 PQ: 0 ANSI: 5
- [ 0.939631] sd 4:0:0:0: [sde] 5860467633 512-byte logical blocks: (3.00 TB/2.72 TiB)
- [ 0.939633] sd 4:0:0:0: [sde] 4096-byte physical blocks
- [ 0.939666] sd 4:0:0:0: [sde] Write Protect is off
- [ 0.939668] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
- [ 0.939682] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.940603] scsi 5:0:0:0: Direct-Access ATA ST3000DM001-1ER166 CC46 PQ: 0 ANSI: 5
- [ 0.941289] sd 5:0:0:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
- [ 0.941291] sd 5:0:0:0: [sdf] 4096-byte physical blocks
- [ 0.941325] sd 5:0:0:0: [sdf] Write Protect is off
- [ 0.941327] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
- [ 0.941348] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.951863] ata15: SATA link down (SStatus 0 SControl 300)
- [ 0.965885] ata19: SATA link down (SStatus 0 SControl 300)
- [ 0.979857] ata23: SATA link down (SStatus 0 SControl 300)
- [ 0.993853] ata27: SATA link down (SStatus 0 SControl 300)
- [ 0.995555] sdc: sdc1 sdc2 sdc5 sdc6 sdc7
- [ 0.996582] sd 2:0:0:0: [sdc] Attached SCSI disk
- [ 0.997239] sdd: sdd1 sdd2 sdd5 sdd6
- [ 0.998047] sd 3:0:0:0: [sdd] Attached SCSI disk
- [ 1.008004] sde: sde1 sde2 sde5 sde6
- [ 1.008608] sd 4:0:0:0: [sde] Attached SCSI disk
- [ 1.008819] ata31: SATA link down (SStatus 0 SControl 300)
- [ 1.019351] sdf: sdf1 sdf2 sdf5 sdf6
- [ 1.019807] sd 5:0:0:0: [sdf] Attached SCSI disk
- [ 1.078779] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1.079418] ata7.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
- [ 1.079420] ata7.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 1.080091] ata7.00: configured for UDMA/133
- [ 1.080668] scsi 6:0:0:0: Direct-Access WDC WD30EFRX-68EUZN0 82.0 PQ: 0 ANSI: 5
- [ 1.081113] sd 6:0:0:0: [sdg] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
- [ 1.081116] sd 6:0:0:0: [sdg] 4096-byte physical blocks
- [ 1.081155] sd 6:0:0:0: [sdg] Write Protect is off
- [ 1.081157] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
- [ 1.081170] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.092773] ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1.093398] ata11.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
- [ 1.093400] ata11.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 1.094055] ata11.00: configured for UDMA/133
- [ 1.127544] sdg: sdg1 sdg2 sdg5 sdg6
- [ 1.128309] sd 6:0:0:0: [sdg] Attached SCSI disk
- [ 1.380515] tsc: Refined TSC clocksource calibration: 3491.912 MHz
- [ 1.380517] Switching to clocksource tsc
- [ 1.385519] ata8: SATA link down (SStatus 0 SControl 300)
- [ 1.690260] ata9: SATA link down (SStatus 0 SControl 300)
- [ 1.995001] ata10: SATA link down (SStatus 0 SControl 300)
- [ 1.995551] scsi 10:0:0:0: Direct-Access WDC WD30EFRX-68EUZN0 82.0 PQ: 0 ANSI: 5
- [ 1.995901] sd 10:0:0:0: [sdk] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
- [ 1.995903] sd 10:0:0:0: [sdk] 4096-byte physical blocks
- [ 1.995942] sd 10:0:0:0: [sdk] Write Protect is off
- [ 1.995944] sd 10:0:0:0: [sdk] Mode Sense: 00 3a 00 00
- [ 1.995961] sd 10:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.032670] sdk: sdk1 sdk2 sdk5 sdk6
- [ 2.033413] sd 10:0:0:0: [sdk] Attached SCSI disk
- [ 2.300741] ata12: SATA link down (SStatus 0 SControl 300)
- [ 2.605481] ata13: SATA link down (SStatus 0 SControl 300)
- [ 2.910224] ata14: SATA link down (SStatus 0 SControl 300)
- [ 3.214954] ata16: SATA link down (SStatus 0 SControl 300)
- [ 3.519695] ata17: SATA link down (SStatus 0 SControl 300)
- [ 3.824438] ata18: SATA link down (SStatus 0 SControl 300)
- [ 4.129184] ata20: SATA link down (SStatus 0 SControl 300)
- [ 4.433924] ata21: SATA link down (SStatus 0 SControl 300)
- [ 4.738678] ata22: SATA link down (SStatus 0 SControl 300)
- [ 5.043406] ata24: SATA link down (SStatus 0 SControl 300)
- [ 5.348149] ata25: SATA link down (SStatus 0 SControl 300)
- [ 5.652889] ata26: SATA link down (SStatus 0 SControl 300)
- [ 5.957631] ata28: SATA link down (SStatus 0 SControl 300)
- [ 6.262370] ata29: SATA link down (SStatus 0 SControl 300)
- [ 6.567111] ata30: SATA link down (SStatus 0 SControl 300)
- [ 6.871852] ata32: SATA link down (SStatus 0 SControl 300)
- [ 7.176593] ata33: SATA link down (SStatus 0 SControl 300)
- [ 7.481334] ata34: SATA link down (SStatus 0 SControl 300)
- [ 7.481432] registered taskstats version 1
- [ 7.482199] rtc_cmos 00:06: setting system clock to 2016-10-16 00:30:58 UTC (1476577858)
- [ 7.483205] Freeing unused kernel memory: 54604k freed
- [ 7.486533] Write protecting the kernel read-only data: 8192k
- [ 7.487523] Freeing unused kernel memory: 844k freed
- [ 7.488020] Freeing unused kernel memory: 440k freed
- [ 7.559332] Loading modules backported from Linux version v3.18.1-0-g39ca484
- [ 7.559334] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c
- [ 7.564478] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
- [ 7.564481] ACPI: Power Button [PWRF]
- [ 7.576015] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
- [ 7.578253] dca service started, version 1.12.1
- [ 7.580529] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- [ 7.580531] e100: Copyright(c) 1999-2006 Intel Corporation
- [ 7.582862] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 7.582863] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 7.585175] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.3-NAPI
- [ 7.585176] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 7.585273] e1000e 0000:00:19.0: setting latency timer to 64
- [ 7.585313] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 7.585326] e1000e 0000:00:19.0: irq 61 for MSI/MSI-X
- [ 7.761786] e1000e 0000:00:19.0 eth0: registered PHC clock
- [ 7.761789] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:08:9b:f7:c1:c9
- [ 7.761791] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
- [ 7.761836] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
- [ 7.764588] ioatdma: Intel(R) QuickData Technology Driver 4.00
- [ 7.767166] Intel(R) Gigabit Ethernet Network Driver - version 5.3.3.2
- [ 7.767167] Copyright (c) 2007-2015 Intel Corporation.
- [ 7.767627] igb 0000:10:00.0: irq 62 for MSI/MSI-X
- [ 7.767630] igb 0000:10:00.0: irq 63 for MSI/MSI-X
- [ 7.813856] igb 0000:10:00.0: added PHC on eth1
- [ 7.813860] igb 0000:10:00.0: Intel(R) Gigabit Ethernet Network Connection
- [ 7.813861] igb 0000:10:00.0: eth1: (PCIe:2.5GT/s:Width x1)
- [ 7.813863] igb 0000:10:00.0 eth1: MAC: 00:08:9b:f7:c1:c6
- [ 7.813920] igb 0000:10:00.0: eth1: PBA No: 000300-000
- [ 7.813959] igb 0000:10:00.0: LRO is disabled
- [ 7.813961] igb 0000:10:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
- [ 7.814479] igb 0000:11:00.0: irq 64 for MSI/MSI-X
- [ 7.814483] igb 0000:11:00.0: irq 65 for MSI/MSI-X
- [ 7.860605] igb 0000:11:00.0: added PHC on eth2
- [ 7.860608] igb 0000:11:00.0: Intel(R) Gigabit Ethernet Network Connection
- [ 7.860610] igb 0000:11:00.0: eth2: (PCIe:2.5GT/s:Width x1)
- [ 7.860611] igb 0000:11:00.0 eth2: MAC: 00:08:9b:f7:c1:c7
- [ 7.860668] igb 0000:11:00.0: eth2: PBA No: 000300-000
- [ 7.860705] igb 0000:11:00.0: LRO is disabled
- [ 7.860706] igb 0000:11:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
- [ 7.861189] igb 0000:12:00.0: irq 66 for MSI/MSI-X
- [ 7.861192] igb 0000:12:00.0: irq 67 for MSI/MSI-X
- [ 7.907718] igb 0000:12:00.0: added PHC on eth3
- [ 7.907721] igb 0000:12:00.0: Intel(R) Gigabit Ethernet Network Connection
- [ 7.907723] igb 0000:12:00.0: eth3: (PCIe:2.5GT/s:Width x1)
- [ 7.907724] igb 0000:12:00.0 eth3: MAC: 00:08:9b:f7:c1:c8
- [ 7.907781] igb 0000:12:00.0: eth3: PBA No: 000300-000
- [ 7.907819] igb 0000:12:00.0: LRO is disabled
- [ 7.907820] igb 0000:12:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
- [ 7.910523] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
- [ 7.910524] ixgb: Copyright (c) 1999-2008 Intel Corporation.
- [ 7.913273] Intel(R) 10 Gigabit PCI Express Network Driver - version 4.3.15
- [ 7.913275] Copyright (c) 1999-2015 Intel Corporation.
- [ 7.915851] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.3.39.1
- [ 7.915852] i40e: Copyright (c) 2013 - 2015 Intel Corporation.
- [ 7.936319] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- [ 7.938554] 8139too: 8139too Fast Ethernet driver 0.9.28
- [ 7.949778] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
- [ 7.961766] sky2: driver version 1.30
- [ 7.970918] Atheros(R) L2 Ethernet Driver - version 2.2.3
- [ 7.970919] Copyright (c) 2007 Atheros Corporation.
- [ 7.979611] jme: JMicron JMC2XX ethernet driver version 1.0.8
- [ 7.985401] sis900.c: v1.08.10 Apr. 2 2006
- [ 7.991026] Brocade 10G Ethernet driver - version: 3.1.2.1
- [ 7.994875] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.02 ($DateTime: 2015/11/02 19:52:00 $)
- [ 7.998430] NET: Registered protocol family 10
- [ 8.001312] cnic: QLogic cnic Driver v2.5.20i (June 16, 2015)
- [ 8.017390] QLogic/NetXen Network Driver v4.0.80
- [ 8.023310] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42
- [ 8.028964] enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.39
- [ 8.038106] iscsi: registered transport (tcp)
- [ 8.076044] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
- [ 8.096773] sd 1:0:0:0: Attached scsi generic sg0 type 0
- [ 8.096828] sd 2:0:0:0: Attached scsi generic sg1 type 0
- [ 8.096891] sd 3:0:0:0: Attached scsi generic sg2 type 0
- [ 8.096955] sd 4:0:0:0: Attached scsi generic sg3 type 0
- [ 8.097013] sd 5:0:0:0: Attached scsi generic sg4 type 0
- [ 8.097075] sd 6:0:0:0: Attached scsi generic sg5 type 0
- [ 8.097534] sd 10:0:0:0: Attached scsi generic sg6 type 0
- [ 8.104153] Fusion MPT base driver 3.04.20
- [ 8.104154] Copyright (c) 1999-2008 LSI Corporation
- [ 8.110164] Fusion MPT SPI Host driver 3.04.20
- [ 8.113107] Fusion MPT SAS Host driver 3.04.20
- [ 8.116704] mpt3sas version 11.00.00.00 loaded
- [ 8.122928] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
- [ 8.125895] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
- [ 8.128969] megasas: 06.810.08.00 Oct 20, 17:00:00 PDT 2015
- [ 8.132107] Adaptec aacraid driver 1.2.1.50639custom
- [ 8.141858] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
- [ 8.154896] HP CISS Driver (v 3.6.26)
- [ 8.161961] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
- [ 8.164960] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
- [ 8.168018] RocketRAID 3xxx/4xxx Controller driver v1.8
- [ 8.236091] md: Autodetecting RAID arrays.
- [ 8.237812] md: invalid raid superblock magic on sdb5
- [ 8.237814] md: sdb5 does not have a valid v0.90 superblock, not importing!
- [ 8.276632] md: invalid raid superblock magic on sdc5
- [ 8.276634] md: sdc5 does not have a valid v0.90 superblock, not importing!
- [ 8.296924] md: invalid raid superblock magic on sdc6
- [ 8.296926] md: sdc6 does not have a valid v0.90 superblock, not importing!
- [ 8.310508] md: invalid raid superblock magic on sdc7
- [ 8.310510] md: sdc7 does not have a valid v0.90 superblock, not importing!
- [ 8.356471] md: invalid raid superblock magic on sdd5
- [ 8.356473] md: sdd5 does not have a valid v0.90 superblock, not importing!
- [ 8.390423] md: invalid raid superblock magic on sdd6
- [ 8.390425] md: sdd6 does not have a valid v0.90 superblock, not importing!
- [ 8.423555] md: invalid raid superblock magic on sde5
- [ 8.423557] md: sde5 does not have a valid v0.90 superblock, not importing!
- [ 8.454892] md: invalid raid superblock magic on sde6
- [ 8.454893] md: sde6 does not have a valid v0.90 superblock, not importing!
- [ 8.485480] md: invalid raid superblock magic on sdf5
- [ 8.485482] md: sdf5 does not have a valid v0.90 superblock, not importing!
- [ 8.504498] md: invalid raid superblock magic on sdf6
- [ 8.504500] md: sdf6 does not have a valid v0.90 superblock, not importing!
- [ 8.525878] md: invalid raid superblock magic on sdg5
- [ 8.525880] md: sdg5 does not have a valid v0.90 superblock, not importing!
- [ 8.553499] md: invalid raid superblock magic on sdg6
- [ 8.553501] md: sdg6 does not have a valid v0.90 superblock, not importing!
- [ 8.580491] md: invalid raid superblock magic on sdk5
- [ 8.580493] md: sdk5 does not have a valid v0.90 superblock, not importing!
- [ 8.604429] md: invalid raid superblock magic on sdk6
- [ 8.604430] md: sdk6 does not have a valid v0.90 superblock, not importing!
- [ 8.604434] md: Scanned 28 and added 14 devices.
- [ 8.604434] md: autorun ...
- [ 8.604435] md: considering sdb1 ...
- [ 8.604437] md: adding sdb1 ...
- [ 8.604439] md: sdb2 has different UUID to sdb1
- [ 8.604440] md: adding sdc1 ...
- [ 8.604441] md: sdc2 has different UUID to sdb1
- [ 8.604443] md: adding sdd1 ...
- [ 8.604444] md: sdd2 has different UUID to sdb1
- [ 8.604445] md: adding sde1 ...
- [ 8.604446] md: sde2 has different UUID to sdb1
- [ 8.604447] md: adding sdf1 ...
- [ 8.604448] md: sdf2 has different UUID to sdb1
- [ 8.604450] md: adding sdg1 ...
- [ 8.604451] md: sdg2 has different UUID to sdb1
- [ 8.604452] md: adding sdk1 ...
- [ 8.604453] md: sdk2 has different UUID to sdb1
- [ 8.604460] md: created md0
- [ 8.604460] md: bind<sdk1>
- [ 8.604466] md: bind<sdg1>
- [ 8.604470] md: bind<sdf1>
- [ 8.604473] md: bind<sde1>
- [ 8.604477] md: bind<sdd1>
- [ 8.604480] md: bind<sdc1>
- [ 8.604483] md: bind<sdb1>
- [ 8.604487] md: running: <sdb1><sdc1><sdd1><sde1><sdf1><sdg1><sdk1>
- [ 8.604798] md/raid1:md0: active with 7 out of 12 mirrors
- [ 8.604831] md0: detected capacity change from 0 to 2549940224
- [ 8.605011] md: considering sdb2 ...
- [ 8.605013] md: adding sdb2 ...
- [ 8.605015] md: adding sdc2 ...
- [ 8.605016] md: adding sdd2 ...
- [ 8.605017] md: adding sde2 ...
- [ 8.605019] md: adding sdf2 ...
- [ 8.605020] md: adding sdg2 ...
- [ 8.605021] md: adding sdk2 ...
- [ 8.605277] md: created md1
- [ 8.605279] md: bind<sdk2>
- [ 8.605283] md: bind<sdg2>
- [ 8.605288] md: bind<sdf2>
- [ 8.605292] md: bind<sde2>
- [ 8.605295] md: bind<sdd2>
- [ 8.605298] md: bind<sdc2>
- [ 8.605302] md: bind<sdb2>
- [ 8.605305] md: running: <sdb2><sdc2><sdd2><sde2><sdf2><sdg2><sdk2>
- [ 8.605442] md/raid1:md1: active with 7 out of 12 mirrors
- [ 8.605456] md1: detected capacity change from 0 to 2147418112
- [ 8.605496] md: ... autorun DONE.
- [ 8.671695] ACPI: bus type USB registered
- [ 8.671846] usbcore: registered new interface driver usbfs
- [ 8.671882] usbcore: registered new interface driver hub
- [ 8.671940] usbcore: registered new interface driver ethub
- [ 8.671987] usbcore: registered new device driver usb
- [ 8.675346] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 8.678619] uhci_hcd: USB Universal Host Controller Interface driver
- [ 8.681965] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 8.681966] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
- [ 8.685169] ehci-pci: EHCI PCI platform driver
- [ 8.685269] ehci-pci 0000:00:1a.0: setting latency timer to 64
- [ 8.685278] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 8.685282] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 8.685292] ehci-pci 0000:00:1a.0: debug port 2
- [ 8.689191] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- [ 8.689204] ehci-pci 0000:00:1a.0: irq 16, io mem 0xb2f3e000
- [ 8.694298] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 8.694707] hub 1-0:1.0: USB hub found
- [ 8.694710] hub 1-0:1.0: 3 ports detected
- [ 8.694844] ehci-pci 0000:00:1d.0: setting latency timer to 64
- [ 8.694850] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 8.694853] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 8.694862] ehci-pci 0000:00:1d.0: debug port 2
- [ 8.698765] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 8.698776] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb2f3d000
- [ 8.704293] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 8.704694] hub 2-0:1.0: USB hub found
- [ 8.704698] hub 2-0:1.0: 3 ports detected
- [ 8.708546] xhci_hcd 0000:00:14.0: setting latency timer to 64
- [ 8.708549] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 8.708552] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
- [ 8.708621] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
- [ 8.708635] xhci_hcd 0000:00:14.0: irq 68 for MSI/MSI-X
- [ 8.708755] xHCI xhci_add_endpoint called for root hub
- [ 8.708756] xHCI xhci_check_bandwidth called for root hub
- [ 8.708795] hub 3-0:1.0: USB hub found
- [ 8.708810] hub 3-0:1.0: 15 ports detected
- [ 8.711118] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 8.711120] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
- [ 8.711204] xHCI xhci_add_endpoint called for root hub
- [ 8.711206] xHCI xhci_check_bandwidth called for root hub
- [ 8.711255] hub 4-0:1.0: USB hub found
- [ 8.711267] hub 4-0:1.0: 6 ports detected
- [ 8.733228] usbcore: registered new interface driver ax88179_178a
- [ 8.736562] usbcore: registered new interface driver asix
- [ 8.739944] usbcore: registered new interface driver r8152
- [ 8.742430] bromolow_synobios: module license 'Synology Inc.' taints kernel.
- [ 8.742432] Disabling lock debugging due to kernel taint
- [ 8.742707] 2016-10-16 0:30:59 UTC
- [ 8.742709] synobios: load, major number 201
- [ 8.742710] Brand: Synology
- [ 8.742711] Model: DS-3615xs
- [ 8.742712] set group disks wakeup number to 4, spinup time deno 7
- [ 9.017020] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 9.152255] Got empty serial number. Generate serial number from product.
- [ 9.152729] hub 1-1:1.0: USB hub found
- [ 9.152851] hub 1-1:1.0: 6 ports detected
- [ 9.242829] synobios cpu_arch proc entry initialized
- [ 9.242831] synobios crypto_hw proc entry initialized
- [ 9.242832] synobios syno_platform proc entry initialized
- [ 9.249827] synobios: unload
- [ 9.276797] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 9.370587] md0: unknown partition table
- [ 9.412030] Got empty serial number. Generate serial number from product.
- [ 9.412034] drivers/usb/core/hub.c (2674) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0
- [ 9.412459] hub 2-1:1.0: USB hub found
- [ 9.412499] hub 2-1:1.0: 8 ports detected
- [ 9.879969] EXT4-fs (md0): synoacl module has not been loaded. Unable to mount with synoacl, vfs_mod status=-1
- [ 9.880425] EXT4-fs (md0): barriers disabled
- [ 9.888535] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
- [ 11.485903] usb 3-1: new low-speed USB device number 2 using xhci_hcd
- [ 11.535302] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 13.609115] usb 3-6: new low-speed USB device number 3 using xhci_hcd
- [ 13.628385] Got empty serial number. Generate serial number from product.
- [ 13.628684] usb 3-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 13.628686] usb 3-6: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 15.701339] usb 3-8: new high-speed USB device number 4 using xhci_hcd
- [ 17.786577] usb 3-9: new high-speed USB device number 5 using xhci_hcd
- [ 17.874574] EXT4-fs (md0): synoacl module has not been loaded. Unable to mount with synoacl, vfs_mod status=-1
- [ 17.882745] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 19.114944] EXT4-fs (md0): re-mounted. Opts: (null)
- [ 26.783400] md1: unknown partition table
- [ 26.844144] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
- [ 26.986995] zram: module is from the staging directory, the quality is unknown, you have been warned.
- [ 26.987465] zram: Created 4 device(s) ...
- [ 26.989883] Adding 2450428k swap on /dev/zram0. Priority:1 extents:1 across:2450428k SS
- [ 26.991798] Adding 2450428k swap on /dev/zram1. Priority:1 extents:1 across:2450428k SS
- [ 26.993647] Adding 2450428k swap on /dev/zram2. Priority:1 extents:1 across:2450428k SS
- [ 26.995638] Adding 2450428k swap on /dev/zram3. Priority:1 extents:1 across:2450428k SS
- [ 27.017610] init: php-fpm pre-start process (17118) terminated with status 1
- [ 27.017680] init: syno-auth-check main process (17148) killed by TERM signal
- [ 27.039620] sit: IPv6 over IPv4 tunneling driver
- [ 27.130106] ACPI: Requesting acpi_cpufreq
- [ 27.211748] fuse init (API version 7.22)
- [ 27.215751] i2c_algo_bit: exports duplicate symbol i2c_bit_add_bus (owned by kernel)
- [ 27.230188] tn40xx: Tehuti Network Driver, 0.3.6.11.2
- [ 27.237903] Compat-mlnx-ofed backport release: b558788
- [ 27.237905] Backport based on mlnx_ofed/mlnx_rdma.git b558788
- [ 27.237905] compat.git: mlnx_ofed/mlnx_rdma.git
- [ 27.264103] bio: create slab <bio-1> at 1
- [ 27.264184] Btrfs loaded
- [ 27.275838] 2016-10-16 0:31:18 UTC
- [ 27.275841] synobios: load, major number 201
- [ 27.275843] Brand: Synology
- [ 27.275844] Model: DS-3615xs
- [ 27.275845] set group disks wakeup number to 4, spinup time deno 7
- [ 27.776071] synobios cpu_arch proc entry initialized
- [ 27.776073] synobios crypto_hw proc entry initialized
- [ 27.776074] synobios syno_platform proc entry initialized
- [ 27.846731] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- [ 27.847844] bonding: bond0 is being deleted...
- [ 27.847876] bonding: bond0: released all slaves
- [ 27.862457] bonding: bond0 is being created...
- [ 27.863684] bonding: bond0: setting mode to 802.3ad (4).
- [ 27.863965] bonding: bond0: Setting use_carrier to 1.
- [ 27.864242] bonding: bond0: Setting MII monitoring interval to 100.
- [ 27.864517] bonding: bond0: Setting up delay to 100.
- [ 27.864791] bonding: bond0: Setting LACP rate to fast (1).
- [ 27.865115] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
- [ 27.867269] bonding: bond0: Adding slave eth0.
- [ 27.867273] drivers/net/bonding/bond_main.c:bond_set_dev_addr(1364) dev:[eth0] get vendor mac fail
- [ 27.867282] drivers/net/bonding/bond_main.c:bond_enslave(1727) dev:[eth0] get vendor mac fail
- [ 27.975994] e1000e 0000:00:19.0: irq 61 for MSI/MSI-X
- [ 28.076833] e1000e 0000:00:19.0: irq 61 for MSI/MSI-X
- [ 28.076934] bonding: bond0: enslaving eth0 as a backup interface with a down link.
- [ 28.079048] bonding: bond0: Adding slave eth1.
- [ 28.079052] drivers/net/bonding/bond_main.c:bond_enslave(1727) dev:[eth1] get vendor mac fail
- [ 28.294579] bonding: bond0: enslaving eth1 as a backup interface with a down link.
- [ 28.296793] bonding: bond0: Adding slave eth2.
- [ 28.296797] drivers/net/bonding/bond_main.c:bond_enslave(1727) dev:[eth2] get vendor mac fail
- [ 28.511957] bonding: bond0: enslaving eth2 as a backup interface with a down link.
- [ 28.514323] bonding: bond0: Adding slave eth3.
- [ 28.514327] drivers/net/bonding/bond_main.c:bond_enslave(1727) dev:[eth3] get vendor mac fail
- [ 28.729601] bonding: bond0: enslaving eth3 as a backup interface with a down link.
- [ 28.784017] systemd-udevd[18451]: starting version 204
- [ 29.345615] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 30.424826] md: md3 stopped.
- [ 30.727895] md: md2 stopped.
- [ 31.034349] md: bind<sdk6>
- [ 31.242982] igb 0000:10:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
- [ 31.262107] bonding: bond0: link status up for interface eth1, enabling it in 0 ms.
- [ 31.262110] bonding: bond0: link status definitely up for interface eth1, 1000 Mbps full duplex.
- [ 31.262121] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
- [ 31.312391] md: bind<sdg5>
- [ 31.312470] md: bind<sdk5>
- [ 31.325163] md: bind<sdd6>
- [ 31.325336] md: bind<sdc6>
- [ 31.325501] md: bind<sdf6>
- [ 31.325586] md: bind<sde6>
- [ 31.325683] md: bind<sdg6>
- [ 31.326159] md/raid:md3: device sdg6 operational as raid disk 0
- [ 31.326161] md/raid:md3: device sde6 operational as raid disk 5
- [ 31.326161] md/raid:md3: device sdf6 operational as raid disk 4
- [ 31.326162] md/raid:md3: device sdc6 operational as raid disk 3
- [ 31.326163] md/raid:md3: device sdd6 operational as raid disk 2
- [ 31.326164] md/raid:md3: device sdk6 operational as raid disk 1
- [ 31.326368] md/raid:md3: allocated 6450kB
- [ 31.326389] md/raid:md3: raid level 5 active with 6 out of 6 devices, algorithm 2
- [ 31.326390] RAID conf printout:
- [ 31.326390] --- level:5 rd:6 wd:6
- [ 31.326391] disk 0, o:1, dev:sdg6
- [ 31.326392] disk 1, o:1, dev:sdk6
- [ 31.326392] disk 2, o:1, dev:sdd6
- [ 31.326393] disk 3, o:1, dev:sdc6
- [ 31.326393] disk 4, o:1, dev:sdf6
- [ 31.326394] disk 5, o:1, dev:sde6
- [ 31.326406] md3: detected capacity change from 0 to 13752620810240
- [ 31.334737] md3: unknown partition table
- [ 31.480803] igb 0000:11:00.0 eth2: igb: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
- [ 31.561850] bonding: bond0: link status up for interface eth2, enabling it in 100 ms.
- [ 31.661766] bonding: bond0: link status definitely up for interface eth2, 1000 Mbps full duplex.
- [ 31.696618] igb 0000:12:00.0 eth3: igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
- [ 31.761692] bonding: bond0: link status up for interface eth3, enabling it in 100 ms.
- [ 31.816606] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
- [ 31.861597] bonding: bond0: link status up for interface eth0, enabling it in 100 ms.
- [ 31.861599] bonding: bond0: link status definitely up for interface eth3, 1000 Mbps full duplex.
- [ 31.917319] md: bind<sdd5>
- [ 31.917516] md: bind<sdc5>
- [ 31.917696] md: bind<sdf5>
- [ 31.917755] md: bind<sde5>
- [ 31.917901] md: bind<sdb5>
- [ 31.918260] md/raid:md2: device sdb5 operational as raid disk 0
- [ 31.918261] md/raid:md2: device sde5 operational as raid disk 6
- [ 31.918261] md/raid:md2: device sdf5 operational as raid disk 5
- [ 31.918262] md/raid:md2: device sdc5 operational as raid disk 4
- [ 31.918263] md/raid:md2: device sdd5 operational as raid disk 3
- [ 31.918263] md/raid:md2: device sdk5 operational as raid disk 2
- [ 31.918264] md/raid:md2: device sdg5 operational as raid disk 1
- [ 31.918523] md/raid:md2: allocated 7506kB
- [ 31.918547] md/raid:md2: raid level 5 active with 7 out of 7 devices, algorithm 2
- [ 31.918548] RAID conf printout:
- [ 31.918549] --- level:5 rd:7 wd:7
- [ 31.918550] disk 0, o:1, dev:sdb5
- [ 31.918550] disk 1, o:1, dev:sdg5
- [ 31.918551] disk 2, o:1, dev:sdk5
- [ 31.918552] disk 3, o:1, dev:sdd5
- [ 31.918552] disk 4, o:1, dev:sdc5
- [ 31.918553] disk 5, o:1, dev:sdf5
- [ 31.918553] disk 6, o:1, dev:sde5
- [ 31.918566] md2: detected capacity change from 0 to 1470672666624
- [ 31.918818] md2: unknown partition table
- [ 31.961510] bonding: bond0: link status definitely up for interface eth0, 1000 Mbps full duplex.
- [ 32.170339] bio: create slab <bio-2> at 2
- [ 33.965214] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 33.969894] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 33.997119] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 37.575980] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 40.614624] EXT4-fs (dm-0): barriers disabled
- [ 40.712900] EXT4-fs (dm-0): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
- [ 42.050566] usb-storage 3-8:1.0: USB Mass Storage device detected
- [ 42.050621] scsi34 : usb-storage 3-8:1.0
- [ 42.050686] usb-storage 3-9:1.0: USB Mass Storage device detected
- [ 42.050716] scsi35 : usb-storage 3-9:1.0
- [ 42.050749] usbcore: registered new interface driver usb-storage
- [ 42.054402] usbcore: registered new interface driver usblp
- [ 42.070755] usbcore: registered new interface driver usbhid
- [ 42.070758] usbhid: USB HID core driver
- [ 42.073701] input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/input/input1
- [ 42.073770] hid-generic 0003:258A:0001.0001: input: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-6/input0
- [ 42.075530] input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/input/input2
- [ 42.075557] Get empty minor:104
- [ 42.075587] hid-generic 0003:258A:0001.0002: input,hiddev0: USB HID v1.10 Device [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-6/input1
- [ 43.051515] scsi 34:0:0:0: Direct-Access USB DISK MODULE PMAP PQ: 0 ANSI: 0 CCS
- [ 43.051611] sd 34:0:0:0: Attached scsi generic sg7 type 0
- [ 43.051894] scsi 35:0:0:0: Direct-Access SanDisk Cruzer Glide 1.27 PQ: 0 ANSI: 6
- [ 43.051965] sd 35:0:0:0: Attached scsi generic sg8 type 0
- [ 43.052462] sd 34:0:0:0: [sdu] 1007616 512-byte logical blocks: (515 MB/492 MiB)
- [ 43.052714] sd 35:0:0:0: [sdv] 62530624 512-byte logical blocks: (32.0 GB/29.8 GiB)
- [ 43.053940] sd 35:0:0:0: [sdv] Write Protect is off
- [ 43.053942] sd 35:0:0:0: [sdv] Mode Sense: 43 00 00 00
- [ 43.054227] sd 35:0:0:0: [sdv] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 43.055065] sd 34:0:0:0: [sdu] Write Protect is off
- [ 43.055068] sd 34:0:0:0: [sdu] Mode Sense: 23 00 00 00
- [ 43.057665] sd 34:0:0:0: [sdu] No Caching mode page found
- [ 43.057667] sd 34:0:0:0: [sdu] Assuming drive cache: write through
- [ 43.057933] sdv: sdv1
- [ 43.058810] sd 35:0:0:0: [sdv] Attached SCSI removable disk
- [ 43.064658] sd 34:0:0:0: [sdu] No Caching mode page found
- [ 43.064659] sd 34:0:0:0: [sdu] Assuming drive cache: write through
- [ 43.065785] sdu: sdu1 sdu2 sdu3 sdu4 < sdu5 sdu6 >
- [ 43.071861] sd 34:0:0:0: [sdu] No Caching mode page found
- [ 43.071862] sd 34:0:0:0: [sdu] Assuming drive cache: write through
- [ 43.071863] sd 34:0:0:0: [sdu] Attached SCSI removable disk
- [ 43.691635] ata2.00: supports DRM functions and may not be fully accessible
- [ 43.692036] ata2.00: supports DRM functions and may not be fully accessible
- [ 43.692153] ata2.00: configured for UDMA/133
- [ 43.692154] ata2: EH complete
- [ 43.693564] ata3.00: configured for UDMA/133
- [ 43.693566] ata3: EH complete
- [ 43.955247] ata5.00: configured for UDMA/133
- [ 43.955250] ata5: EH complete
- [ 43.955863] ata7.00: configured for UDMA/133
- [ 43.955865] ata7: EH complete
- [ 43.956052] ata11.00: configured for UDMA/133
- [ 43.956053] ata11: EH complete
- [ 43.956617] ata6.00: configured for UDMA/133
- [ 43.956619] ata6: EH complete
- [ 43.956843] ata4.00: configured for UDMA/133
- [ 43.956844] ata4: EH complete
- [ 46.020932] ata7.00: configured for UDMA/133
- [ 46.020935] ata7: EH complete
- [ 46.023636] ata11.00: configured for UDMA/133
- [ 46.023639] ata11: EH complete
- [ 46.024973] ata2.00: supports DRM functions and may not be fully accessible
- [ 46.025428] ata2.00: supports DRM functions and may not be fully accessible
- [ 46.025557] ata2.00: configured for UDMA/133
- [ 46.025559] ata2: EH complete
- [ 46.036860] ata3.00: configured for UDMA/133
- [ 46.036863] ata3: EH complete
- [ 46.040556] ata4.00: configured for UDMA/133
- [ 46.040558] ata4: EH complete
- [ 46.045995] ata5.00: configured for UDMA/133
- [ 46.045998] ata5: EH complete
- [ 46.059093] ata6.00: configured for UDMA/133
- [ 46.059096] ata6: EH complete
- [ 46.860579] EXT3-fs (sdu1): Ignoring deprecated oldalloc option
- [ 46.866005] EXT4-fs (sdu1): warning: mounting unchecked fs, running e2fsck is recommended
- [ 46.921428] EXT4-fs (sdu1): mounted filesystem without journal. Opts: nodelalloc,synoacl,data=ordered,oldalloc
- [ 46.957943] EXT3-fs (sdu2): Ignoring deprecated oldalloc option
- [ 46.963229] EXT4-fs (sdu2): warning: mounting unchecked fs, running e2fsck is recommended
- [ 46.965045] EXT4-fs (sdu2): mounted filesystem without journal. Opts: nodelalloc,synoacl,data=ordered,oldalloc
- [ 47.001609] EXT3-fs (sdu3): Ignoring deprecated oldalloc option
- [ 47.007277] EXT4-fs (sdu3): warning: mounting unchecked fs, running e2fsck is recommended
- [ 47.009128] EXT4-fs (sdu3): mounted filesystem without journal. Opts: nodelalloc,synoacl,data=ordered,oldalloc
- [ 47.045793] EXT3-fs (sdu4): error: unable to read superblock
- [ 47.048099] EXT4-fs (sdu4): unable to read superblock
- [ 47.092739] attempt to access beyond end of device
- [ 47.092741] sdu4: rw=0, want=3, limit=2
- [ 47.130884] EXT3-fs (sdu5): Ignoring deprecated oldalloc option
- [ 47.140494] EXT4-fs (sdu5): warning: mounting unchecked fs, running e2fsck is recommended
- [ 47.142337] EXT4-fs (sdu5): mounted filesystem without journal. Opts: nodelalloc,synoacl,data=ordered,oldalloc
- [ 47.179033] EXT3-fs (sdu6): Ignoring deprecated oldalloc option
- [ 47.184637] EXT4-fs (sdu6): warning: mounting unchecked fs, running e2fsck is recommended
- [ 47.186466] EXT4-fs (sdu6): mounted filesystem without journal. Opts: nodelalloc,synoacl,data=ordered,oldalloc
- [ 47.506824] loop: module loaded
- [ 50.882358] init: smbd main process (27501) killed by HUP signal
- [ 50.882381] init: smbd main process ended, respawning
- [ 54.664291] init: smbd main process (27725) killed by HUP signal
- [ 54.664309] init: smbd main process ended, respawning
- [ 56.627668] init: smbd main process (28169) killed by HUP signal
- [ 56.627686] init: smbd main process ended, respawning
- [ 60.946186] init: upnpd main process (18708) killed by KILL signal
- [ 62.763747] warning: `named' uses 32-bit capabilities (legacy support in use)
- [ 63.268926] findhostd uses obsolete (PF_INET,SOCK_PACKET)
- [ 81.274884] aufs 3.10.x-20141110
- [ 81.280032] Bridge firewalling registered
- [ 87.474662] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
- [ 88.102479] aufs au_opts_verify:1571:docker[29664]: dirperm1 breaks the protection by the permission bits on the lower branch
- [ 88.458245] aufs au_opts_verify:1571:docker[29664]: dirperm1 breaks the protection by the permission bits on the lower branch
- [ 88.917568] cgroup: docker (29664) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
- [ 88.929139] device docker4e978ba entered promiscuous mode
- [ 88.929193] IPv6: ADDRCONF(NETDEV_UP): docker4e978ba: link is not ready
- [ 88.968109] IPv6: ADDRCONF(NETDEV_CHANGE): docker4e978ba: link becomes ready
- [ 88.968127] docker0: port 1(docker4e978ba) entered forwarding state
- [ 88.968134] docker0: port 1(docker4e978ba) entered forwarding state
- [ 88.968159] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
- [ 89.280957] aufs au_opts_verify:1571:docker[29821]: dirperm1 breaks the protection by the permission bits on the lower branch
- [ 89.478859] device dockerb78e74c entered promiscuous mode
- [ 89.478897] IPv6: ADDRCONF(NETDEV_UP): dockerb78e74c: link is not ready
- [ 89.478899] docker0: port 2(dockerb78e74c) entered forwarding state
- [ 89.478904] docker0: port 2(dockerb78e74c) entered forwarding state
- [ 89.513419] IPv6: ADDRCONF(NETDEV_CHANGE): dockerb78e74c: link becomes ready
- [ 103.961284] docker0: port 1(docker4e978ba) entered forwarding state
- [ 104.472832] docker0: port 2(dockerb78e74c) entered forwarding state
- [ 109.659865] vboxdrv: Found 8 processor cores
- [ 109.675570] vboxdrv: TSC mode is Invariant, tentative frequency 3491913958 Hz
- [ 109.675572] vboxdrv: Successfully loaded version 5.0.22 (interface 0x00240000)
- [ 111.681289] VBoxNetFlt: Successfully started.
- [ 111.682129] VBoxNetAdp: Successfully started.
- [ 111.695492] VBoxPciLinuxInit
- [ 111.695498] vboxpci: pci-stub module not available, cannot detach PCI devices
- [ 111.695499] vboxpci: IOMMU not found (not compiled)
- [ 914.820514] type=1400 audit(1476578892.720:2): apparmor="DENIED" operation="mkdir" parent=2642 profile="/usr/syno/synoman/webman/index.cgi" name="/usr/syno/synoman/synohdpack/tmp/" pid=2676 comm="mkdir" requested_mask="c" denied_mask="c" fsuid=0 ouid=0
- [ 920.791322] type=1400 audit(1476578898.696:3): apparmor="DENIED" operation="mkdir" parent=2727 profile="/usr/syno/synoman/webman/index.cgi" name="/usr/syno/synoman/synohdpack/tmp/" pid=2761 comm="mkdir" requested_mask="c" denied_mask="c" fsuid=0 ouid=0
- [ 1116.628902] VBoxPciLinuxLinuxUnload
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement