Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 2.6.32.15-g31bc15c-dirty (markus@KubuntuVM) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-188) ) #557 PREEMPT Mon Nov 15 19:26:15 CET 2010
- <4>[ 0.000000] CPU: ARMv7 Processor [510f00f2] revision 2 (ARMv7), cr=10c53c7f
- <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
- <4>[ 0.000000] Machine: htcleo
- <4>[ 0.000000] Ignoring unrecognised tag 0x00000000
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
- <7>[ 0.000000] On node 0 totalpages: 124864
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c04cba0c, node_mem_map c0bd1000
- <7>[ 0.000000] Normal zone: 512 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 65024 pages, LIFO batch:15
- <7>[ 0.000000] HighMem zone: 464 pages used for memmap
- <7>[ 0.000000] HighMem zone: 58864 pages, LIFO batch:15
- <6>[ 0.000000] allocating 33554432 bytes at c0fa7000 (127a7000 physical) for sf pmem arena
- <6>[ 0.000000] allocating 35217408 bytes at c2fa7000 (147a7000 physical) for adsp pmem arena
- <6>[ 0.000000] ram_console: found existing buffer, size 47421, start 47421
- <6>[ 0.000000] console [ram0] enabled
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 123888
- <5>[ 0.000000] Kernel command line: rel_path=CM6HTCLeo
- <6>[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- <6>[ 0.000000] Memory: 256MB 231MB = 487MB total
- <5>[ 0.000000] Memory: 418888KB available (4236K code, 2213K data, 400K init, 237312K highmem)
- <6>[ 0.000000] Hierarchical RCU implementation.
- <6>[ 0.000000] NR_IRQS:332
- <4>[ 0.000000] $$$ msm_timer_init $$$
- <4>[ 0.000000] 1DIV = 00000003
- <4>[ 0.000000] 2DIV = 00000003
- <4>[ 0.000000] Console: colour dummy device 80x30
- <6>[ 0.000000] console [tty0] enabled
- <6>[ 0.000000] ram_console_early_init: already initialized, bailing out
- <6>[ 0.000000] Calibrating delay loop... 663.55 BogoMIPS (lpj=3317760)
- <4>[ 0.239044] Mount-cache hash table entries: 512
- <6>[ 0.239776] Initializing cgroup subsys debug
- <6>[ 0.239807] Initializing cgroup subsys cpuacct
- <6>[ 0.239837] Initializing cgroup subsys freezer
- <6>[ 0.239929] CPU: Testing write buffer coherency: ok
- <6>[ 0.242675] regulator: core version 0.5
- <6>[ 0.243011] NET: Registered protocol family 16
- <4>[ 0.244079] htcleo_init()
- <6>[ 0.245117] Max ACPU freq from efuse data is 998400 KHz
- <6>[ 0.245574] Acquire 'boot-time' perf_lock
- <6>[ 0.245605] init_dex_comm: WinCE DEX initialized.
- <6>[ 0.245666] PLL0 @ f8005300: MODE=00000007 L=0000000c M=00000004 N=00000005 freq=245760000 Hz (245 MHz)
- <6>[ 0.245697] PLL1 @ f8005320: MODE=00000007 L=00000028 M=00000000 N=00000001 freq=768000000 Hz (768 MHz)
- <6>[ 0.245758] PLL4 @ f8005380: MODE=00000000 L=0000000f M=00000000 N=00000001 freq=288000000 Hz (288 MHz)
- <6>[ 0.245788] PLL5 @ f80053a0: MODE=00000000 L=00000032 M=00000000 N=00000001 freq=960000000 Hz (960 MHz)
- <6>[ 0.245849] PCB XC: 00000004
- <6>[ 0.245849] AMSS version: 15.42.50.09H
- <6>[ 0.245880] BD_ADDRESS=50:c3:00:00:00:00
- <6>[ 0.245910] register analog ops = c049e548
- <6>[ 0.245941] [HS_MGR] (headset_notifier_register) Register MIC_BIAS notifier
- <6>[ 0.348419] Init Panel
- <4>[ 0.348480] panel type is 1 :board id is 4 : AUO
- <4>[ 0.349243] htcleo_init_mmc()+
- <4>[ 0.349578] htcleo_init_mmc()-
- <4>[ 0.363067] bio: create slab <bio-0> at 0
- <6>[ 0.364379] mdp_probe: initialized
- <6>[ 0.365081] msm_i2c_probe
- <6>[ 0.365203] msm_i2c_probe: clk_ctl 315, 400000 Hz
- <6>[ 0.365905] regulator: VDCDC1: 1000 <--> 1300 mV
- <6>[ 0.366180] regulator: VDCDC2: 1260 mV
- <6>[ 0.366363] regulator: VDCDC3: 800 <--> 3300 mV
- <6>[ 0.366577] regulator: LDO1: 1000 <--> 3150 mV
- <6>[ 0.366790] regulator: LDO2: 3300 mV
- <3>[ 0.367279] msm_i2c msm_i2c.0: IRQ but nothing to do!, status 0
- <6>[ 0.369018] Bluetooth: Core ver 2.15
- <6>[ 0.369262] NET: Registered protocol family 31
- <6>[ 0.369293] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.369323] Bluetooth: HCI socket layer initialized
- <6>[ 0.369689] Switching to clocksource gp_timer
- <7>[ 0.371459] spi clk = 0x0
- <4>[ 0.371490] spi: SPI_CONFIG=8f
- <4>[ 0.371490] spi: SPI_IO_CONTROL=401
- <4>[ 0.371520] spi: SPI_OPERATIONAL=85
- <4>[ 0.371551] spi: SPI_ERROR_FLAGS_EN=7f
- <4>[ 0.371551] spi: SPI_ERROR_FLAGS=0
- <4>[ 0.371582] -msm_spi_probe()
- <6>[ 0.372070] NET: Registered protocol family 2
- <6>[ 0.372314] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 0.372955] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- <6>[ 0.373199] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
- <6>[ 0.373321] TCP: Hash tables configured (established 8192 bind 8192)
- <6>[ 0.373352] TCP reno registered
- <6>[ 0.373687] NET: Registered protocol family 1
- <6>[ 0.375091] Unpacking initramfs...
- <6>[ 0.609680] Freeing initrd memory: 1856K
- <6>[ 0.610504] smd_init()
- <6>[ 0.610504] smd_core_init()
- <6>[ 0.610626] smd_core_init() done
- <3>[ 0.610656] msm_init_last_radio_log: could not retrieve SMEM_CLKREGIM_BSP
- <6>[ 0.610870] smd_alloc_channel() cid=00 size=08192 'SMD_DS'
- <6>[ 0.611145] smd_alloc_channel() cid=01 size=32768 'SMD_DIAG'
- <6>[ 0.611328] smd_alloc_channel() cid=02 size=08192 'SMD_RPCCALL'
- <6>[ 0.611480] smd_alloc_channel() cid=05 size=08192 'SMD_CONTROL'
- <6>[ 0.611694] smd_alloc_channel() cid=07 size=32768 'SMD_DATA1'
- <6>[ 0.611877] smd_alloc_channel() cid=08 size=32768 'SMD_DATA2'
- <6>[ 0.612091] smd_alloc_channel() cid=09 size=32768 'SMD_DATA3'
- <6>[ 0.612274] smd_alloc_channel() cid=11 size=32768 'SMD_DATA5'
- <6>[ 0.612457] smd_alloc_channel() cid=12 size=32768 'SMD_DATA6'
- <6>[ 0.612640] smd_alloc_channel() cid=13 size=32768 'SMD_DATA7'
- <6>[ 0.612792] smd_alloc_channel() cid=15 size=08192 'SMD_DATA9'
- <6>[ 0.613037] smd_alloc_channel() cid=27 size=08192 'SMD_GPSNMEA'
- <6>[ 0.613220] smd_alloc_channel() cid=40 size=08192 'DSP_DIAG'
- <3>[ 0.613403] smd_alloc_v2: cid 41 does not exist
- <3>[ 0.613403] smd_alloc_v1: cid 41 does not exist
- <6>[ 0.613464] smd_alloc_channel() cid=42 size=08192 'DSP_DAL_AQ_VID'
- <6>[ 0.613647] smd_alloc_channel() cid=43 size=08192 'DSP_DAL_AQ_AUD'
- <6>[ 0.613830] smd_alloc_channel() cid=46 size=08192 'DSP_DAL00'
- <3>[ 0.614013] smd_alloc_v2: cid 47 does not exist
- <3>[ 0.614044] smd_alloc_v1: cid 47 does not exist
- <6>[ 0.614074] smd_alloc_channel() cid=48 size=08192 'SMD_DAL00'
- <3>[ 0.615051] _smem_log_init: no power log or log_idx allocated, smem_log disabled
- <6>[ 0.616302] RPC Probe
- <6>[ 0.616729] RPC Init done
- <6>[ 0.616760] SMD: ch 2 0 -> 1
- <6>[ 0.617767] SMD: ch 2 1 -> 2
- <6>[ 0.840484] Init amss parameters, found AMSS: 1550
- <6>[ 0.842376] Acquire 'boot-time' halt_lock
- <6>[ 0.842529] perflock_notifier_call: cpufreq lock speed 998400
- <6>[ 0.842559] active perf lock 'boot-time'
- <6>[ 0.842712] acpuclk_set_vdd_level got regulator
- <6>[ 0.843627] Registered led device: button-backlight
- <3>[ 1.670166] msm_i2c msm_i2c.0: error, status 43c8 (5C)
- <3>[ 1.670227] msm_i2c msm_i2c.0: Error during data xfer (-5) (5C)
- <3>[ 1.670288] msm_i2c msm_i2c.0: error, status 43c8 (34)
- <3>[ 1.670318] msm_i2c msm_i2c.0: Error during data xfer (-5) (34)
- <6>[ 1.671020] input: htcleo-touchscreen as /devices/virtual/input/input0
- <6>[ 1.671112] leo_touch_name 0-0000: Start touchscreen htcleo-touchscreen
- <6>[ 1.680633] -- RK OFF --
- <4>[ 1.690246] htcleo_wifi_init: start
- <6>[ 1.699432] htcleo-microp 0-0066: microp version [05][14]
- <6>[ 1.703460] htcleo-microp 0-0066: Init Done
- <6>[ 1.703704] capella_cm3602_probe: probe
- <6>[ 1.704040] input: proximity as /devices/virtual/input/input1
- <6>[ 1.704803] htcleo_leds_probe
- <6>[ 1.706146] Registered led device: green
- <6>[ 1.706298] Registered led device: amber
- <6>[ 1.706481] htcleo_backlight_probe: HTCLeo Backlight connect with microP: Probe
- <6>[ 1.706665] Registered led device: lcd-backlight
- <6>[ 1.708557] Registered led device: flashlight
- <6>[ 1.708587] flashlight_probe: The Flashlight Driver is ready
- <6>[ 1.708801] batt: init over voltage interrupt detection. at 1709080846 (1970-01-01 00:00:01.709050329 UTC)
- <6>[ 1.708892] htc_battery_core_probe
- <6>[ 1.709564] batt: htc_cable_status_update: 0 -> 0
- <6>[ 1.710174] [HS_MGR] (htc_35mm_probe) ++++++++++++++++++++
- <6>[ 1.711303] input: h2w headset as /devices/virtual/input/input2
- <6>[ 1.711639] [HS_MGR] (htc_35mm_probe) --------------------
- <6>[ 1.711853] [HS_GPIO] (audiojack_probe) ++++++++++++++++++++
- <6>[ 1.711944] DET IRQ Registered!
- <6>[ 1.712036] MIC IRQ Registered!
- <6>[ 1.712036] [HS_MGR] (headset_notifier_register) Register MIC_STATUS notifier
- <6>[ 1.712066] [HS_MGR] (headset_notifier_register) Register KEY_INT_ENABLE notifier
- <6>[ 1.712097] [HS_GPIO] (audiojack_probe) --------------------
- <4>[ 1.721221] highmem bounce pool size: 64 pages
- <6>[ 1.721557] ashmem: initialized
- <6>[ 1.722412] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- <6>[ 1.726379] alg: No test for stdrng (krng)
- <6>[ 1.726470] io scheduler noop registered
- <6>[ 1.726593] io scheduler cfq registered (default)
- <7>[ 1.727416] clock-wince: pc_clk_set_rate: id=42 rate=24576000
- <7>[ 1.727447] clock-wince: set mdns: 42, 24576000; bitidx=0, offset=0, ns=0
- <4>[ 1.727478] set_mdns_host_clock: FIXME! Don't know how to set clock 42 - no known Md/Ns reg
- <7>[ 1.727508] clock-wince: pc_clk_set_rate: id=43 rate=24576000
- <7>[ 1.727539] clock-wince: set mdns: 43, 24576000; bitidx=0, offset=0, ns=0
- <4>[ 1.727569] set_mdns_host_clock: FIXME! Don't know how to set clock 43 - no known Md/Ns reg
- <6>[ 1.728302] msmfb_probe() installing 480 x 800 panel
- <6>[ 1.737548] msmfb: full update starting
- <6>[ 1.737609] mdp_lcdc_probe: initialized
- <6>[ 1.748626] BCM chip
- <6>[ 1.748870] msm_serial_hs_bcm.0: ttyHS0 at MMIO 0xa0200000 (irq = 44) is a MSM HS UART
- <6>[ 1.749420] msm_serial_hs module loaded
- <6>[ 1.753601] loop: module loaded
- <6>[ 1.753692] pmem: 1 init
- <6>[ 1.784301] msmfb: full update completed
- <6>[ 1.784973] pmem_adsp: 1 init
- <6>[ 1.786468] pmem_venc: 1 init
- <6>[ 1.787200] Android kernel panic handler initialized (bind=kpanic)
- <6>[ 1.787353] spi_bma150_probe: G-sensor connect with microP: start initial
- <6>[ 1.787658] msmfb: turning on panel
- <6>[ 1.787689] lcdc_unblank: ()
- <6>[ 1.787719] auo_panel_unblank
- <6>[ 1.820159] __spi_bma150_set_mode: BMA get into SLEEP mode!
- <6>[ 1.820678] msm_nand: allocated dma buffer at ffa01000, dma_addr 2124f000
- <6>[ 1.820831] status: e03020
- <6>[ 1.820861] nandid: 5510bcad maker ad device bc
- <6>[ 1.820861] Found a supported NAND device
- <6>[ 1.820892] NAND Id : 0xBCAD
- <6>[ 1.820922] Buswidth : 16 Bits
- <6>[ 1.820922] Density : 512 MByte
- <6>[ 1.820953] Pagesize : 2048 Bytes
- <6>[ 1.820953] Erasesize: 131072 Bytes
- <6>[ 1.820983] Oobsize : 64 Bytes
- <6>[ 1.821044] msm_nand: read CFG0 = aa5400c0, CFG1 = 6744e
- <6>[ 1.821075] CFG0 Old: 0xaa5400c0
- <6>[ 1.821105] CFG1 Old: 0x0006744e
- <6>[ 1.821105] CFG0 Init : 0xea5400c0
- <6>[ 1.821136] CFG1 Init : 0x0006744e
- <6>[ 1.821136] CFG0: cw/page=3 ud_sz=512 ecc_sz=10 spare_sz=4 num_addr_cycles=5
- <6>[ 1.821228] DEV_CMD1: f00f3000
- <6>[ 1.821319] <6>NAND_EBI2_ECC_BUF_CFG: 1ff
- <4>[ 1.821319] #MTD# parts in atag = 0
- <6>[ 1.822448] PPP generic driver version 2.4.2
- <6>[ 1.822814] PPP Deflate Compression module registered
- <6>[ 1.822845] PPP BSD Compression module registered
- <6>[ 1.823913] PPP MPPE Compression module registered
- <6>[ 1.823944] NET: Registered protocol family 24
- <6>[ 1.825561] msm72k_udc: msm72k_probe
- <6>[ 1.825592] usb: accessory detect 0
- <6>[ 1.825622] usb: id_pin_gpio 0
- <6>[ 1.825683] msm72k_udc: msm72k_probe() io=d0860000, irq=58, dma=ffa02000(2126b000)
- <6>[ 1.826477] android init
- <6>[ 1.826568] android_probe pdata: c049ad30
- <6>[ 1.826721] android_bind
- <7>[ 1.826751] android_bind_config
- <6>[ 1.826782] android_usb gadget: android_usb ready
- <6>[ 1.826812] msm72k_udc: msm72k_udc: registered gadget driver 'android_usb'
- <6>[ 1.826965] f_adb init
- <6>[ 1.826995] android_register_function adb
- <6>[ 1.826995] f_mass_storage init
- <6>[ 1.827026] android_register_function usb_mass_storage
- <6>[ 1.827026] f_rndis init
- <6>[ 1.827056] android_register_function ether
- <6>[ 1.827056] serial init
- <6>[ 1.827087] android_register_function serial
- <6>[ 1.827087] diag init
- <6>[ 1.827178] diag:msm_diag_probe(), pdev->id=0x1
- <6>[ 1.827209] SMD: ch 40 0 -> 1
- <6>[ 1.827270] SMD: ch 40 1 -> 2
- <6>[ 1.827362] android_register_function diag
- <4>[ 1.827423] android_usb gadget: using random self ethernet address
- <4>[ 1.827453] android_usb gadget: using random host ethernet address
- <6>[ 1.828002] usb0: MAC ce:4a:b7:6b:6b:19
- <6>[ 1.828002] usb0: HOST MAC c6:41:cb:d0:ab:95
- <6>[ 1.828216] mass_storage_bind_config
- <6>[ 1.828399] fsg_probe pdata: c049bdc4
- <6>[ 1.829589] hsusb: IDLE -> ONLINE
- <6>[ 1.829620] usb: lpm exit
- <6>[ 1.829650] hsusb: reset controller
- <6>[ 1.829711] android_usb gadget: Number of LUNs=1
- <6>[ 1.829833] adb_bind_config
- <6>[ 1.830932] diag_bind_config
- <6>[ 1.832672] serial_bind_config
- <6>[ 1.833770] usb: product_id=0xff9
- <6>[ 1.834716] GPIO Matrix Keypad Driver: Start keypad matrix for htcleo-keypad in interrupt mode
- <6>[ 1.834838] GPIO Input Driver: Start gpio inputs for htcleo-keypad in interrupt mode
- <6>[ 1.835174] input: htcleo-keypad as /devices/virtual/input/input3
- <6>[ 1.835968] using input dev h2w headset for key reset
- <6>[ 1.835998] using input dev htcleo-keypad for key reset
- <6>[ 1.836486] RTC: Init MSM RTC Clock
- <6>[ 1.837066] using rtc device, msm_rtc, for alarms
- <6>[ 1.837097] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc as rtc0
- <6>[ 1.837249] AKM8973 compass driver: init
- <6>[ 1.838043] input: compass as /devices/virtual/input/input4
- <6>[ 1.838806] adp1650 Led Flash driver: init
- <6>[ 1.838928] Linux video capture interface: v2.00
- <6>[ 1.839599] sctrl.node 0
- <6>[ 1.839599] s5k3e2fx_sensor_probe
- <6>[ 1.860107] msm_hsusb_phy_reset
- <6>[ 2.070129] msm72k_udc: ulpi: write 0x0c to 0x31
- <6>[ 2.070159] msm72k_udc: ulpi: write 0x30 to 0x32
- <6>[ 2.070190] msm72k_udc: ulpi: write 0x1d to 0x0d
- <6>[ 2.070190] msm72k_udc: ulpi: write 0x1d to 0x10
- <6>[ 2.070251] usb: notify offline
- <6>[ 2.070281] msm_hsusb: enable pullup
- <6>[ 2.070312] hsusb: ONLINE -> OFFLINE
- <6>[ 2.070343] usb: notify offline
- <6>[ 2.070343] msm_hsusb_phy_reset
- <6>[ 2.130126] usb: lpm enter
- <6>[ 2.130126] usb_suspend_phy
- <6>[ 2.271484] s5k3e2fx:kobject creat and add
- <6>[ 2.271514] s5k3e2fx:sysfs_create_file
- <6>[ 2.271545] s5k3e2fx:sysfs_create_file
- <6>[ 2.272674] [ds2746_batt]ds2746_battery_init
- <6>[ 2.272766] [ds2746_batt] ds2746_battery_prob
- <4>[ 2.273071] [D:BATT]Use 600 Kohm thermal resistance
- <6>[ 2.273956] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- <6>[ 2.274047] Bluetooth: HCI UART driver ver 2.2
- <6>[ 2.274078] Bluetooth: HCI H4 protocol initialized
- <6>[ 2.274108] Bluetooth: HCILL protocol initialized
- <6>[ 2.274139] perflock_notifier_call: cpufreq lock speed 998400
- <6>[ 2.274169] active perf lock 'boot-time'
- <6>[ 2.275604] mmc0: Qualcomm MSM SDCC at 0x00000000a0300000 irq 24,0 dma 8
- <6>[ 2.275634] mmc0: Platform slot type: N/A
- <6>[ 2.275665] mmc0: 4 bit data mode enabled
- <6>[ 2.275665] mmc0: 8 bit data mode disabled
- <6>[ 2.275695] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 64000000 Hz
- <6>[ 2.275726] mmc0: Slot eject status = 1
- <6>[ 2.275756] mmc0: Power save feature enable = 1
- <6>[ 2.275756] mmc0: DM non-cached buffer at ffa04000, dma_addr 0x212be000
- <6>[ 2.275787] mmc0: DM cmd busaddr 0x212be000, cmdptr busaddr 0x212be300
- <4>[ 2.276550] @@@ SD power 0 @@@
- <6>[ 2.276794] mmc1: Qualcomm MSM SDCC at 0x00000000a0400000 irq 26,240 dma 8
- <6>[ 2.276824] mmc1: Platform slot type: SD
- <6>[ 2.276855] mmc1: 4 bit data mode enabled
- <6>[ 2.276855] mmc1: 8 bit data mode disabled
- <6>[ 2.276885] mmc1: MMC clock 144000 -> 50000000 Hz, PCLK 64000000 Hz
- <6>[ 2.276916] mmc1: Slot eject status = 0
- <6>[ 2.276947] mmc1: Power save feature enable = 1
- <6>[ 2.276947] mmc1: DM non-cached buffer at ffa05000, dma_addr 0x21260000
- <6>[ 2.276977] mmc1: DM cmd busaddr 0x21260000, cmdptr busaddr 0x21260300
- <6>[ 2.278472] logger: created 64K log 'log_main'
- <6>[ 2.278686] logger: created 256K log 'log_events'
- <6>[ 2.278869] logger: created 64K log 'log_radio'
- <6>[ 2.279052] logger: created 64K log 'log_system'
- <4>[ 2.279754] GACT probability NOT on
- <4>[ 2.279785] Mirror/redirect action on
- <4>[ 2.279815] u32 classifier
- <4>[ 2.279846] Actions configured
- <4>[ 2.279846] Netfilter messages via NETLINK v0.30.
- <4>[ 2.279968] nf_conntrack version 0.5.0 (6582 buckets, 26328 max)
- <4>[ 2.280212] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- <4>[ 2.280242] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- <4>[ 2.280273] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- <4>[ 2.280487] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 2.283782] xt_time: kernel timezone is -0000
- <6>[ 2.284149] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 2.284332] arp_tables: (C) 2002 David S. Miller
- <6>[ 2.284454] TCP cubic registered
- <6>[ 2.284698] NET: Registered protocol family 10
- <6>[ 2.285614] lo: Disabled Privacy Extensions
- <6>[ 2.286651] Mobile IPv6
- <6>[ 2.286682] IPv6 over IPv4 tunneling driver
- <6>[ 2.287353] sit0: Disabled Privacy Extensions
- <6>[ 2.288116] ip6tnl0: Disabled Privacy Extensions
- <6>[ 2.288269] NET: Registered protocol family 17
- <6>[ 2.288330] NET: Registered protocol family 15
- <6>[ 2.288360] Bluetooth: L2CAP ver 2.14
- <6>[ 2.288391] Bluetooth: L2CAP socket layer initialized
- <6>[ 2.288421] Bluetooth: SCO (Voice Link) ver 0.6
- <6>[ 2.288452] Bluetooth: SCO socket layer initialized
- <6>[ 2.288757] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 2.288787] Bluetooth: RFCOMM socket layer initialized
- <6>[ 2.288818] Bluetooth: RFCOMM ver 1.11
- <6>[ 2.288848] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 2.288879] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 2.289031] ThumbEE CPU extension supported.
- <6>[ 2.289062] wifi_nvs_init
- <6>[ 2.289581] No sleep statistics
- <6>[ 2.289611] [Port list] init()
- <6>[ 2.289611] [Port list] Virtual Address for port_list: [f81b6da0]
- <6>[ 2.289642] [Port list] Physical Address for port_list: [1B6DA0]
- <6>[ 2.290802] input: lightsensor-level as /devices/virtual/input/input5
- <6>[ 2.291564] clock_late_init() disabled 19 unused clocks
- <6>[ 2.291595] VFP support v0.3: implementor 51 architecture 0 part 0f variant 0 rev 1
- <4>[ 2.293884] [D:BATT] V=4040(678) I=-385(fffffc31) C=1197.0/1230(10c3) id=4(a5) T=330(e4) KADC=1000
- <4>[ 2.293914] [D:BATT] state change(0->2), full count=0, over load count=0 [2294]
- <6>[ 2.293975] batt: ds2784_notify: 1 98 at 2294255418 (1970-01-01 00:00:02.294224900 UTC)
- <6>[ 2.294006] batt: batt:power_supply_changed: battery at 2294316453 (1970-01-01 00:00:02.294285935 UTC)
- <4>[ 2.294433] regulator_init_complete: incomplete constraints, leaving ldo2 on
- <4>[ 2.294677] regulator_init_complete: incomplete constraints, leaving ldo1 on
- <4>[ 2.294891] regulator_init_complete: incomplete constraints, leaving dcdc3 on
- <4>[ 2.295104] regulator_init_complete: incomplete constraints, leaving dcdc2 on
- <4>[ 2.295318] regulator_init_complete: incomplete constraints, leaving dcdc1 on
- <6>[ 2.296875] rs30000048:00010000 rs30000048:00010000: setting system clock to 2010-11-15 18:34:00 UTC (1289846040)
- <6>[ 2.298065] Freeing init memory: 400K
- <4>[ 2.312957] @@@ SD power 17 @@@
- <4>[ 2.379180] @@@ SD power 15 @@@
- <4>[ 2.898681] mmc1: host does not support reading read-only switch. assuming write-enable.
- <6>[ 2.898712] mmc1: new high speed SDHC card at address 57df
- <6>[ 2.899230] mmcblk0: mmc1:57df SD16G 14.9 GiB
- <6>[ 2.899566] mmcblk0:
- <6>[ 12.589385] ADDRCONF(NETDEV_UP): usb0: link is not ready
- <6>[ 12.594116] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
- <6>[ 12.594299] batt: charger ON (FAST) at 12594609451 (2010-11-15 18:34:10.797424346 UTC)
- <6>[ 15.905639] perflock_notifier_call: cpufreq lock speed 998400
- <6>[ 15.905670] active perf lock 'boot-time'
- <6>[ 15.905822] perflock_notifier_call: cpufreq lock speed 998400
- <6>[ 15.905822] active perf lock 'boot-time'
- <6>[ 15.905944] perflock_notifier_call: cpufreq lock speed 998400
- <6>[ 15.905944] active perf lock 'boot-time'
- <6>[ 16.079498] enabling adb
- <6>[ 16.080017] adb_open
- <6>[ 16.324554] warning: `rild' uses 32-bit capabilities (legacy support in use)
- <6>[ 16.448150] SMD: ch 0 0 -> 1
- <6>[ 16.448272] SMD: ch 5 0 -> 1
- <4>[ 16.448272] -qmi_open 0
- <4>[ 16.448333] -qmi_open 0
- <4>[ 16.448394] -qmi_open 0
- <4>[ 16.449676] +qmi_read 256
- <6>[ 16.450195] SMD: ch 5 1 -> 2
- <6>[ 16.450195] SMD: ch 0 1 -> 2
- <6>[ 17.413970] htc-acoustic: open
- <6>[ 17.415222] htc-acoustic: mmap
- <6>[ 17.415344] htc-acoustic: ioctl
- <6>[ 17.415344] htc-acoustic: ioctl: ACOUSTIC_UPDATE_ADIE called 167.
- <6>[ 17.415344] htc-acoustic: ioctl: done.
- <6>[ 17.415649] htc-acoustic: release
- <6>[ 17.415954] Audio: voice: stop
- <6>[ 17.418121] Audio: SWITCH DEVICE 17306899, acdb 607
- <6>[ 17.418121] q6audio_init
- <6>[ 17.418182] audio: init: first run, init dummy control
- <6>[ 17.418243] SMD: ch 43 0 -> 1
- <6>[ 17.521636] SMD: ch 43 1 -> 2
- <6>[ 17.522644] dal_attach: status = 0, name = 'DAL_AQ_AUD'
- <6>[ 17.523254] dal_attach: status = 0, name = 'DAL_AQ_AUD'
- <6>[ 18.109344] open done!
- <6>[ 18.109436] SMD: ch 48 0 -> 1
- <6>[ 18.209991] SMD: ch 48 1 -> 2
- <6>[ 18.210174] dal_attach: status = 0, name = 'DAL00'
- <6>[ 18.210571] dal_attach: status = 0, name = 'DAL00'
- <6>[ 18.210571] Audio: htcleo_analog_init
- <6>[ 18.222686] acdb: trying htcleo.acdb
- <6>[ 18.222717] misc msm_audio_ctl: firmware: requesting htcleo.acdb
- <6>[ 18.233215] acdb: 'htcleo.acdb' found, using translation
- <4>[ 18.233245] $$$ q6audio_init_rx_volumes
- <6>[ 18.233245] Audio: htcleo_get_rx_vol 0
- <4>[ 18.233581] $$ DEV=0107AC88: vol is 0
- <6>[ 18.233612] Audio: htcleo_get_rx_vol 0
- <3>[ 18.233947] init: untracked pid 190 exited
- <4>[ 18.234313] $$ DEV=01081511: vol is 0
- <6>[ 18.234313] Audio: htcleo_get_rx_vol 0
- <4>[ 18.235015] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.235198] $$ DEV=0107AC8A: vol is 0
- <6>[ 18.235198] Audio: htcleo_get_rx_vol 500
- <4>[ 18.235412] $$ DEV=01081513: vol is 500
- <6>[ 18.235443] Audio: htcleo_get_rx_vol 500
- <4>[ 18.236236] $$ DEV=01081514: vol is 500
- <6>[ 18.236267] Audio: htcleo_get_rx_vol 500
- <4>[ 18.236968] $$ DEV=0108C508: vol is 500
- <6>[ 18.236968] Audio: htcleo_get_rx_vol 500
- <4>[ 18.237335] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.237701] $$ DEV=0108C894: vol is 500
- <6>[ 18.237731] Audio: htcleo_get_rx_vol 500
- <4>[ 18.238433] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.238708] $$ DEV=0108C895: vol is 500
- <6>[ 18.238739] Audio: htcleo_get_rx_vol 500
- <4>[ 18.239440] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.239746] $$ DEV=0108C509: vol is 500
- <6>[ 18.239746] Audio: htcleo_get_rx_vol 0
- <4>[ 18.240447] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.240753] $$ DEV=0108151C: vol is 0
- <6>[ 18.240783] Audio: htcleo_get_rx_vol 0
- <4>[ 18.241455] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.241729] $$ DEV=0107AC8D: vol is 0
- <6>[ 18.241760] Audio: htcleo_get_rx_vol 0
- <4>[ 18.242462] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.242706] $$ DEV=01081510: vol is 0
- <6>[ 18.242736] Audio: htcleo_get_rx_vol 500
- <4>[ 18.243408] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.243621] $$ DEV=01081512: vol is 500
- <6>[ 18.243652] Audio: htcleo_get_rx_vol 0
- <4>[ 18.244354] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.244567] $$ DEV=0108151B: vol is 0
- <6>[ 18.244567] Audio: htcleo_get_rx_vol 400
- <4>[ 18.245269] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.245483] $$ DEV=01081519: vol is 400
- <6>[ 18.245513] Audio: htcleo_get_rx_vol 400
- <4>[ 18.246215] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.246429] $$ DEV=0108151A: vol is 400
- <6>[ 18.246429] Audio: htcleo_get_rx_vol 400
- <4>[ 18.247375] $$ DEV=01081518: vol is 400
- <6>[ 18.247406] Audio: htcleo_get_rx_vol 500
- <4>[ 18.248016] $$ DEV=01089BF4: vol is 500
- <6>[ 18.248016] Audio: htcleo_get_rx_vol 500
- <4>[ 18.248504] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.248687] $$ DEV=01089BF3: vol is 500
- <4>[ 18.248687] audio_update_acdb (17306899, 607)
- <4>[ 18.248718] table
- <6>[ 18.248718] acdb: 580 bytes for device 607, rate 48000.
- <4>[ 18.248748] res1 = 580
- <4>[ 18.248748] res2 = 580
- <4>[ 18.248779] call audio_set_table
- <4>[ 18.249389] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.250366] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.251312] audio_cb: s=1 e=0107605c status=20
- <6>[ 18.257690] Audio: SWITCH DEVICE 17306898, acdb 0
- <4>[ 18.257965] audio_cb: s=1 e=0107605c status=20
- <6>[ 18.258178] Audio: htcleo_get_rx_vol 500
- <4>[ 18.258209] $$ DEV=01081513: vol is 500
- <4>[ 18.259307] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.260467] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.261566] audio_cb: s=1 e=0107605c status=20
- <4>[ 18.266479] audio_cb: s=1 e=0107605c status=20
- <6>[ 24.110412] msm_kgsl: initilized dev=1 mmu=on
- <6>[ 24.110534] misc kgsl: firmware: requesting yamato_pm4.fw
- <6>[ 24.114074] misc kgsl: firmware: requesting yamato_pfp.fw
- <3>[ 24.115173] init: untracked pid 208 exited
- <3>[ 24.118591] init: untracked pid 209 exited
- <6>[ 40.105499] Audio: htcleo_get_rx_vol 200
- <4>[ 40.105529] $$ DEV=01081513: vol is 200
- <4>[ 40.107025] audio_cb: s=1 e=0107605c status=20
- <6>[ 40.357788] request_suspend_state: wakeup (3->0) at 40358037178 (2010-11-15 18:34:38.560882590 UTC)
- <6>[ 41.120178] __spi_bma150_set_mode: BMA get into NORMAL mode!
- <6>[ 48.942657] notify_cable_status(1)
- <6>[ 48.942687] msm_hsusb_set_vbus_state: 1
- <6>[ 48.948333] hsusb: OFFLINE -> ONLINE
- <6>[ 48.948364] usb: lpm exit
- <6>[ 48.949401] hsusb: reset controller
- <6>[ 48.979919] msm_hsusb_phy_reset
- <6>[ 49.189849] msm72k_udc: ulpi: write 0x0c to 0x31
- <6>[ 49.189880] msm72k_udc: ulpi: write 0x30 to 0x32
- <6>[ 49.189910] msm72k_udc: ulpi: write 0x1d to 0x0d
- <6>[ 49.189910] msm72k_udc: ulpi: write 0x1d to 0x10
- <6>[ 49.189971] usb: notify offline
- <6>[ 49.189971] msm_hsusb: enable pullup
- <6>[ 49.193023] msm72k_udc: usb: suspend
- <6>[ 49.210357] usb: not AC charger
- <6>[ 49.326354] msm72k_udc: usb: reset
- <6>[ 49.326416] usb: send connect type 1
- <6>[ 49.326446] fsg_set_ums_state: 1
- <6>[ 49.326446] ums: set state 1
- <6>[ 49.326599] batt:online=1
- <6>[ 49.326629] [ds2746_batt] cable change to 1
- <6>[ 49.326629] batt: ds2784_notify: 0 1 at 49326939768 (2010-11-15 18:34:47.529754663 UTC)
- <6>[ 49.326660] batt: charger ON (SLOW) at 49326939768 (2010-11-15 18:34:47.529785180 UTC)
- <6>[ 49.328643] msm72k_udc: usb: portchange USB_SPEED_HIGH
- <6>[ 49.488250] msm72k_udc: usb: reset
- <6>[ 49.490539] msm72k_udc: usb: portchange USB_SPEED_HIGH
- <6>[ 49.704620] android_usb gadget: high speed config #1: android
- <6>[ 49.705322] adb_function_set_alt: maxsize = 512
- <6>[ 49.705505] ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
- <6>[ 49.705749] ums: set state 1
- <4>[ 52.301879] [D:BATT] V=4111(695) I=-64(ffffff5e) C=1192.0/1230(10b6) id=4(a8) T=330(e6) KADC=993
- <4>[ 52.301910] [D:BATT] acr update: P=974, C=4292.
- <4>[ 52.302124] [D:BATT]new RARC=974 C=1198mAh adc=4292.
- <4>[ 52.302154] [D:BATT] state change(2->3), full count=0, over load count=0 [1355901705]
- <6>[ 58.004425] SMD: ch 7 0 -> 1
- <7>[ 59.940124] usb0: no IPv6 routers present
- <6>[ 60.239807] Release 'boot-time' perf_lock
- <6>[ 60.840515] Release 'boot-time' halt_lock
- <6>[ 61.239837] perflock_notifier_call: cpufreq recover policy 245000 998400
- <6>[ 63.001708] SMD: ch 7 1 -> 2
- <6>[ 86.045257] htcwc_value = 0
- <6>[ 86.087921] msm_open_common: open control0
- <6>[ 86.088653] wait event : 1 timeout:3000
- <6>[ 86.240386] s5k3e2fx_ctrl->prev_res:0
- <6>[ 86.240386] s5k3e2fx_setting rupdate:0 g_usModuleVersion:1
- <6>[ 86.250244] >>>>>>>>(2010-11-15 18:35:24.453338650 UTC)<<<<<<<
- <6>[ 86.250244] msm_open_common: open config0
- <6>[ 86.252349] s5k3e2fx: otp_vendorid1[0]:0x 4
- <6>[ 86.252380] s5k3e2fx: otp_vendorid2[0]:0x 50
- <6>[ 86.252380] s5k3e2fx: otp_vendorid3[0]:0x 2
- <6>[ 86.254638] s5k3e2fx: otp_vendorid1[1]:0x 0
- <6>[ 86.254669] s5k3e2fx: otp_vendorid2[1]:0x 0
- <6>[ 86.254669] s5k3e2fx: otp_vendorid3[1]:0x 0
- <6>[ 86.255432] s5k3e2fx: otp_fuseid1[0]:0x 6
- <6>[ 86.255462] s5k3e2fx: otp_fuseid2[0]:0x 8f
- <6>[ 86.255462] s5k3e2fx: otp_fuseid3[0]:0x 7
- <6>[ 86.256286] s5k3e2fx: otp_fuseid1[1]:0x 0
- <6>[ 86.256286] s5k3e2fx: otp_fuseid2[1]:0x 0
- <6>[ 86.256317] s5k3e2fx: otp_fuseid3[1]:0x 0
- <6>[ 86.256317] s5k3e2fx: fuse->fuse_id_word1:0
- <6>[ 86.256317] s5k3e2fx: fuse->fuse_id_word2:0
- <6>[ 86.256317] s5k3e2fx: fuse->fuse_id_word3:0x00045002
- <6>[ 86.256347] s5k3e2fx: fuse->fuse_id_word4:0x00068f07
- <6>[ 86.269317] msm_enqueue: queue event new max is 1
- <6>[ 86.270202] msm_enqueue: queue control new max is 1
- <6>[ 86.463287] flashlight: mode is same: 0
- <6>[ 86.463317] flashlight hasn't been enable orhas already reset to 0 due to timeout
- <6>[ 86.468048] CFG_SET_MODE
- <6>[ 86.468078] s5k3e2fx_setting rupdate:1 g_usModuleVersion:1
- <6>[ 86.486053] >>>>>>>>(2010-11-15 18:35:24.689147977 UTC)<<<<<<<
- <6>[ 86.486053] msm_open_common: open frame0
- <6>[ 86.498077] CFG_SET_MODE
- <6>[ 86.498107] s5k3e2fx_setting rupdate:1 g_usModuleVersion:1
- <6>[ 86.606201] msm_enqueue: queue frame new max is 1
- <6>[ 86.606262] msm_enqueue: queue event new max is 2
- <6>[ 88.627807] msm_open_common: open control0
- <6>[ 88.839080] msm_enqueue: queue event new max is 3
- <6>[ 88.839416] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 89.036102] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 89.134155] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 89.232208] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 89.330841] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 89.428405] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 89.526458] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 89.624572] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 89.722625] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 89.820861] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 90.016387] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 90.114929] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 90.212554] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 90.311157] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 90.410003] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 90.507415] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 90.606048] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 90.703491] msm_enqueue: queue control new max is 1
- <6>[ 90.714416] msm_release_control: control0
- <6>[ 90.714477] __msm_release:sync->opencnt:4
- <6>[ 90.723480] msm_open_common: open control0
- <6>[ 90.997894] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 91.193908] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 91.292083] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 91.390747] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 91.487670] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 91.586242] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 91.684326] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 91.782409] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 91.880523] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 91.978698] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 92.174224] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 92.272613] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 92.370330] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 92.468994] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 92.567077] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 92.665161] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 92.763244] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 92.861267] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 92.897216] msm_enqueue: queue control new max is 1
- <6>[ 92.898223] msm_release_control: control0
- <6>[ 92.898254] __msm_release:sync->opencnt:4
- <6>[ 92.900207] msm_release_frame: frame0
- <6>[ 92.900238] __msm_release:sync->opencnt:3
- <6>[ 92.900238] release frame atomic_set pmsm->opened as 0
- <6>[ 92.986419] flashlight: mode is same: 0
- <6>[ 92.986450] flashlight hasn't been enable orhas already reset to 0 due to timeout
- <6>[ 93.040924] CFG_SET_MODE
- <6>[ 93.040954] s5k3e2fx_setting rupdate:1 g_usModuleVersion:1
- <6>[ 93.070556] >>>>>>>>(2010-11-15 18:35:31.273651148 UTC)<<<<<<<
- <6>[ 93.070587] msm_open_common: open frame0
- <6>[ 93.096862] CFG_SET_MODE
- <6>[ 93.096893] s5k3e2fx_setting rupdate:1 g_usModuleVersion:1
- <6>[ 93.608825] SMD: ch 42 0 -> 1
- <6>[ 93.710235] SMD: ch 42 1 -> 2
- <6>[ 93.710449] dal_attach: status = 0, name = 'DAL_AQ_VID'
- <6>[ 93.710632] VENC_INTERFACE_VERSION 20000, version_info.version 10000
- <6>[ 94.301391] msm_open_common: open control0
- <6>[ 94.490264] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 94.571166] smd_close(cf875200)
- <3>[ 94.571563] init: untracked pid 515 exited
- <6>[ 94.678680] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 94.773254] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 94.867767] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 94.962371] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 95.056915] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 95.151458] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 95.246063] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 95.340759] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 95.435302] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 95.624328] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 95.718872] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 95.813446] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 95.907989] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 96.002624] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 96.097106] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 96.132934] msm_enqueue: queue control new max is 1
- <6>[ 96.167877] msm_release_control: control0
- <6>[ 96.167907] __msm_release:sync->opencnt:4
- <6>[ 96.182647] msm_open_common: open control0
- <6>[ 96.380645] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 96.570953] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 96.664489] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 96.759063] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 96.853637] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 96.948181] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 97.042755] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 97.144348] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 97.231872] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 97.326538] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 97.515563] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 97.610137] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 97.704711] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 97.799255] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 97.988372] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 98.084320] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 98.177520] s5k3e2fx_move_focus step_direction_pre_define 20
- <6>[ 98.272094] msm_enqueue: queue control new max is 1
- <6>[ 98.273773] msm_release_control: control0
- <6>[ 98.273803] __msm_release:sync->opencnt:4
- <4>[ 102.321258] [D:BATT] V=4143(6a2) I=0(1) C=1198.0/1230(10c6) id=4(ab) T=320(e7) KADC=1000
- <4>[ 102.321289] [D:BATT] state change(3->5), full count=0, over load count=2 [1355951724]
- <6>[ 102.321289] batt: ds2784_notify: 1 98 at 102321599190 (2010-11-15 18:35:40.524414084 UTC)
- <6>[ 102.321350] batt: batt:power_supply_changed: battery at 102321629707 (2010-11-15 18:35:40.524475119 UTC)
- <6>[ 107.964355] pmem: requested data from file descriptor that doesn't exist.
- <3>[ 107.964385] venc_add_pmem_to_list: get_pmem_file failed for fd=-1 offset=0
- <3>[ 107.964416] venc_assign_q6_buffers: recon_buf0 failed to add_to_pmem_list
- <3>[ 107.964416] venc_start: assign_q6_buffers failed
- <4>[ 152.331237] [D:BATT] V=4150(6a5) I=89(e3) C=1199.0/1230(10c8) id=4(ab) T=320(e8) KADC=1000
- <4>[ 152.331268] [D:BATT] acr update: P=974, C=4292.
- <4>[ 152.331512] [D:BATT]new RARC=974 C=1198mAh adc=4292.
- <4>[ 152.331512] [D:BATT] state change(5->3), full count=0, over load count=0 [1356001734]
- <6>[ 153.915771] binder: release 593:593 transaction 8169 out, still active
- <6>[ 153.916870] binder: 199:282 transaction failed 29189, size 52-0
- <6>[ 153.917083] binder: 199:282 transaction failed 29189, size 52-0
- <6>[ 153.917205] binder: 199:282 transaction failed 29189, size 52-0
- <6>[ 157.324279] msm_enqueue: queue event new max is 4
- <6>[ 157.418823] msm_enqueue: queue event new max is 5
- <6>[ 157.513397] msm_enqueue: queue event new max is 6
- <6>[ 157.607971] msm_enqueue: queue event new max is 7
- <6>[ 157.702514] msm_enqueue: queue event new max is 8
- <6>[ 157.797088] msm_enqueue: queue event new max is 9
- <6>[ 157.891632] msm_enqueue: queue event new max is 10
- <6>[ 157.986206] msm_enqueue: queue event new max is 11
- <6>[ 158.080780] msm_enqueue: queue event new max is 12
- <6>[ 158.175354] msm_enqueue: queue event new max is 13
- <6>[ 158.269927] msm_enqueue: queue event new max is 14
- <6>[ 158.364349] msm_enqueue: queue event new max is 15
- <6>[ 158.458923] msm_enqueue: queue event new max is 16
- <6>[ 158.553466] msm_enqueue: queue event new max is 17
- <6>[ 158.648071] msm_enqueue: queue event new max is 18
- <6>[ 158.742736] msm_enqueue: queue event new max is 19
- <6>[ 158.837310] msm_enqueue: queue event new max is 20
- <3>[ 158.869873] msm_i2c msm_i2c.0: Error waiting for notbusy
- <3>[ 158.869903] msm_i2c msm_i2c.0: Still busy after xfer completion (66)
- <6>[ 158.931854] msm_enqueue: queue event new max is 21
- <6>[ 159.026428] msm_enqueue: queue event new max is 22
- <6>[ 159.120971] msm_enqueue: queue event new max is 23
- <6>[ 159.215576] msm_enqueue: queue event new max is 24
- <6>[ 159.309997] msm_enqueue: queue event new max is 25
- <6>[ 159.404663] msm_enqueue: queue event new max is 26
- <6>[ 159.499267] msm_enqueue: queue event new max is 27
- <6>[ 159.593658] msm_enqueue: queue event new max is 28
- <6>[ 159.688354] msm_enqueue: queue event new max is 29
- <6>[ 159.782897] msm_enqueue: queue event new max is 30
- <6>[ 159.877471] msm_enqueue: queue event new max is 31
- <6>[ 159.972015] msm_enqueue: queue event new max is 32
- <6>[ 160.066619] msm_enqueue: queue event new max is 33
- <6>[ 160.161163] msm_enqueue: queue event new max is 34
- <6>[ 160.255706] msm_enqueue: queue event new max is 35
- <6>[ 160.350158] msm_enqueue: queue event new max is 36
- <6>[ 160.444763] msm_enqueue: queue event new max is 37
- <6>[ 160.539428] msm_enqueue: queue event new max is 38
- <6>[ 160.633880] msm_enqueue: queue event new max is 39
- <6>[ 160.728546] msm_enqueue: queue event new max is 40
- <6>[ 160.823089] msm_enqueue: queue event new max is 41
- <3>[ 160.849884] msm_i2c msm_i2c.0: Error waiting for notbusy
- <3>[ 160.849914] msm_i2c msm_i2c.0: Still busy in starting xfer(48)
- <4>[ 160.849975] msm_i2c msm_i2c.0: i2c_scl: 1, i2c_sda: 0
- <6>[ 160.850097] msm_i2c msm_i2c.0: Bus busy cleared after 1 clock cycles, status 0, intf 300
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement