linaro@linaro-ubuntu-desktop:~$ dmesg
ted, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ARC USBOTG Device Controller driver (1 August 2005)
mousedev: PS/2 mouse device common for all mice
i2c-core: driver [isl29023] using legacy suspend method
i2c-core: driver [isl29023] using legacy resume method
snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc0
i2c /dev entries driver
Linux video capture interface: v2.00
mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
i2c-core: driver [mag3110] using legacy suspend method
i2c-core: driver [mag3110] using legacy resume method
imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCIATH3K protocol initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
mmc0: SDHCI controller on platform [sdhci-esdhc-imx.3] using DMA
mmc1: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA
mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
VPU initialized
Thermal calibration data is 0x5774dc7d
Thermal sensor with ratio = 181
Anatop Thermal registered as thermal_zone0
anatop_thermal_probe: default cooling device is cpufreq!
mmc0: new high speed SDHC card at address 59b4
mmcblk0: mmc0:59b4 USDU1 7.37 GiB
 mmcblk0: p1
caam caam.0: device ID = 0x0a16010000000000
caam caam.0: job rings = 2, qi = 0
alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam)
caam caam.0: authenc-hmac-md5-cbc-aes-caam
alg: No test for authenc(hmac(sha1),cbc(aes)) (authenc-hmac-sha1-cbc-aes-caam)
caam caam.0: authenc-hmac-sha1-cbc-aes-caam
alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam)
caam caam.0: authenc-hmac-sha224-cbc-aes-caam
alg: No test for authenc(hmac(sha256),cbc(aes)) (authenc-hmac-sha256-cbc-aes-caam)
caam caam.0: authenc-hmac-sha256-cbc-aes-caam
alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam)
caam caam.0: authenc-hmac-md5-cbc-des3_ede-caam
alg: No test for authenc(hmac(sha1),cbc(des3_ede)) (authenc-hmac-sha1-cbc-des3_ede-caam)
caam caam.0: authenc-hmac-sha1-cbc-des3_ede-caam
alg: No test for authenc(hmac(sha224),cbc(des3_ede)) (authenc-hmac-sha224-cbc-des3_ede-caam)
caam caam.0: authenc-hmac-sha224-cbc-des3_ede-caam
alg: No test for authenc(hmac(sha256),cbc(des3_ede)) (authenc-hmac-sha256-cbc-des3_ede-caam)
caam caam.0: authenc-hmac-sha256-cbc-des3_ede-caam
alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam)
caam caam.0: authenc-hmac-md5-cbc-des-caam
alg: No test for authenc(hmac(sha1),cbc(des)) (authenc-hmac-sha1-cbc-des-caam)
caam caam.0: authenc-hmac-sha1-cbc-des-caam
alg: No test for authenc(hmac(sha224),cbc(des)) (authenc-hmac-sha224-cbc-des-caam)
caam caam.0: authenc-hmac-sha224-cbc-des-caam
alg: No test for authenc(hmac(sha256),cbc(des)) (authenc-hmac-sha256-cbc-des-caam)
caam caam.0: authenc-hmac-sha256-cbc-des-caam
caam caam.0: cbc-aes-caam
caam caam.0: cbc-3des-caam
caam caam.0: cbc-des-caam
mmc1: new high speed SDHC card at address 59b4
mmcblk1: mmc1:59b4 USDU1 7.37 GiB
 mmcblk1: p1
usb 1-1: new full speed USB device number 2 using fsl-ehci
platform caam_jr.0: registering rng-caam
platform caam_sm.0: caam_sm_test: 8-byte key test match OK
platform caam_sm.0: caam_sm_test: 16-byte key test match OK
platform caam_sm.0: caam_sm_test: 32-byte key test match OK
platform caam_secvio.0: security violation service handlers armed
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver snd-usb-audio
mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio
asoc: mxc-hdmi-soc <-> imx-hdmi-soc-dai.0 mapping ok
ALSA device list:
  #0: imx-hdmi-soc
NET: Registered protocol family 26
TCP cubic registered
NET: Registered protocol family 17
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
can: raw protocol (rev 20090105)
can: broadcast manager protocol (rev 20090105 t)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
lib80211_crypt: registered algorithm 'WEP'
lib80211_crypt: registered algorithm 'CCMP'
lib80211_crypt: registered algorithm 'TKIP'
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Bus freq driver module loaded
Bus freq driver Enabled
mxc_dvfs_core_probe
DVFS driver module loaded
snvs_rtc snvs_rtc.0: setting system clock to 2013-05-05 08:13:52 UTC (1367741632)
Warning: unable to open an initial console.
EXT4-fs (mmcblk1p1): warning: mounting unchecked fs, running e2fsck is recommended
EXT4-fs (mmcblk1p1): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:9.
Freeing init memory: 184K
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: new high speed USB device number 2 using fsl-ehci
usb 1-1.2: new low speed USB device number 3 using fsl-ehci
init: ureadahead main process (1354) terminated with status 5
init: Failed to open system console: No such device
usb 1-1.2: device v413c p2003 is not supported
input: Dell Dell USB Keyboard as /devices/platform/fsl-ehci.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input0
generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-fsl-ehci.0-1.2/input0
usb 1-1.3: new full speed USB device number 4 using fsl-ehci
usb 1-1.3: device v0fe6 p9700 is not supported
dm9601 1-1.3:1.0: eth0: register 'dm9601' at usb-fsl-ehci.0-1.3, Davicom DM9601 USB Ethernet, 00:e0:4c:53:44:58
usb 1-1.4: new full speed USB device number 5 using fsl-ehci
hub 1-1.4:1.0: USB hub found
hub 1-1.4:1.0: 4 ports detected
usb 1-1.4.1: new low speed USB device number 6 using fsl-ehci
usb 1-1.4.1: device v046d pc040 is not supported
input: Logitech USB-PS/2 Optical Mouse as /devices/platform/fsl-ehci.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/input/input1
generic-usb 0003:046D:C040.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-fsl-ehci.0-1.4.1/input0
init: Failed to open system console: No such device
udevd[1497]: starting version 175
init: Failed to open system console: No such device
udevd[2177]: renamed network interface eth0 to eth7
rtw driver version=v3.4.4_xxxx.20120730
Build at: May  4 2013 15:02:29
register rtw_netdev_ops to netdev_ops
CHIP TYPE: RTL8188C_8192C

usb_endpoint_descriptor(0):
bLength=7
bDescriptorType=5
bEndpointAddress=81
wMaxPacketSize=200
bInterval=0
RT_usb_endpoint_is_bulk_in = 1

usb_endpoint_descriptor(1):
bLength=7
bDescriptorType=5
bEndpointAddress=2
wMaxPacketSize=200
bInterval=0
RT_usb_endpoint_is_bulk_out = 2

usb_endpoint_descriptor(2):
bLength=7
bDescriptorType=5
bEndpointAddress=3
wMaxPacketSize=200
bInterval=0
RT_usb_endpoint_is_bulk_out = 3

usb_endpoint_descriptor(3):
bLength=7
bDescriptorType=5
bEndpointAddress=84
wMaxPacketSize=40
bInterval=1
RT_usb_endpoint_is_int_in = 4, Interval = 1
nr_endpoint=4, in_num=2, out_num=2

USB_SPEED_HIGH
Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.
RF_Type is 3!!
EEPROM type is E-FUSE
====> ReadAdapterInfo8192C
Boot from EFUSE, Autoload OK !
EEPROMVID = 0x0bda
EEPROMPID = 0x8176
EEPROMCustomerID : 0x00
EEPROMSubCustomerID: 0x00
RT_CustomerID: 0x00
_ReadMACAddress MAC Address from EFUSE = 00:e0:5c:84:07:28
EEPROMRegulatory = 0x0
_ReadBoardType(0)
BT Coexistance = disable
RT_ChannelPlan: 0x0a
_ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
### PS params=>  power_mgnt(0),usbss_enable(0) ###
### AntDivCfg(0)
readAdapterInfo_8192CU(): REPLACEMENT = 1
<==== ReadAdapterInfo8192C in 280 ms
rtw_macaddr_cfg MAC Address  = 00:e0:5c:84:07:28
MAC Address from pnetdev->dev_addr= 00:e0:5c:84:07:28
bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
usbcore: registered new interface driver rtl8192cu
init: Failed to open system console: No such device
init: Failed to open system console: No such device
init: Failed to open system console: No such device
init: failsafe main process (2553) killed by TERM signal
udevd[2179]: renamed network interface wlan0 to wlan1
init: Failed to open system console: No such device
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process ended, respawning
dm9601 1-1.3:1.0: eth7: link up, 100Mbps, full-duplex, lpa 0xFFFF
init: auto-serial-console main process ended, respawning
init: auto-serial-console main process ended, respawning
init: auto-serial-console respawning too fast, stopped
bDriverStopped=1
+871x_drv - drv_open, bup=0
 ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
FirmwareDownload92C accquire FW from embedded image
fw_ver=v80, fw_subver=0, sig=0x88c0
dm9601 1-1.3:1.0: eth7: link up, 100Mbps, full-duplex, lpa 0xFFFF
fw download ok!
Set RF Chip ID to RF_6052 and RF type to 1T1R.
init: plymouth-stop pre-start process (2803) terminated with status 1
init: tty1 main process (2804) killed by TERM signal
IQK:Start!!!
Path A IQK Success!!
Path A IQK Success!!
IQK: final_candidate is 0
IQK: RegE94=100 RegE9C=c RegEA4=fe RegEAC=2 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
 Path A IQ Calibration Success !
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized vivante 1.0.0 20120216 on minor 0
pdmpriv->TxPowerTrackControl = 1
MAC Address from REG_MACID = 00:e0:5c:84:07:28
rtl8192cu_hal_init in 620ms
MAC Address = 00:e0:5c:84:07:28
-871x_drv - drv_open, bup=1
set_mode = IW_MODE_INFRA
(2)871x_drv - drv_close, bup=1, hw_init_completed=1
rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
-871x_drv - drv_close, bup=1
+871x_drv - drv_open, bup=1
-871x_drv - drv_open, bup=1
[rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
set_mode = IW_MODE_INFRA
[rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
survey done event(6)
survey done event(9)
==>pwr_state_check_handler .fw_state(8)
==> rtw_ps_cmd  , enqueue CMD
[sdhci_pre_dma_transfer] invalid cookie: data->host_cookie 3194 host->next_data.cookie 3195
survey done event(8)
survey done event(7)
usb 1-1.4.4: new full speed USB device number 7 using fsl-ehci
usb 1-1.4.4: not running at top speed; connect to a high speed hub
usb 1-1.4.4: device v13fe p1e00 is not supported
scsi0 : usb-storage 1-1.4.4:1.0
scsi 0:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: [sda] 4030464 512-byte logical blocks: (2.06 GB/1.92 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk