API tools faq
paste
Advertisement
RobertBerger

poky-image-minimal beaglexm REV C

RobertBerger
Jun 14th, 2011
348
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.79 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2011.03-00038-g8d4addc-dirty (Jun 13 2011 - 14:09:56)
  2.  
  3. OMAP3630/3730-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
  4. OMAP3 Beagle board + LPDDR/NAND
  5. I2C: ready
  6. DRAM: 256 MiB
  7. NAND: 0 MiB
  8. MMC: OMAP SD/MMC: 0
  9. *** Warning - readenv() failed, using default environment
  10.  
  11. In: serial
  12. Out: serial
  13. Err: serial
  14. Beagle unknown 0x02
  15. No EEPROM on expansion board
  16. Die ID #1c0400229ff800000163810c0f033025
  17. Hit any key to stop autoboot: 0
  18. reading boot.scr
  19.  
  20. 150 bytes read
  21. Running bootscript from mmc ...
  22. ## Executing script at 82000000
  23. reading uImage
  24.  
  25. 2631884 bytes read
  26. Booting from mmc ...
  27. ## Booting kernel from Legacy Image at 82000000 ...
  28. Image Name: Linux-2.6.37.3-yocto-standard+
  29. Image Type: ARM Linux Kernel Image (uncompressed)
  30. Data Size: 2631820 Bytes = 2.5 MiB
  31. Load Address: 80008000
  32. Entry Point: 80008000
  33. Verifying Checksum ... OK
  34. Loading Kernel Image ... OK
  35. OK
  36.  
  37. Starting kernel ...
  38.  
  39. Uncompressing Linux... done, booting the kernel.
  40. Linux version 2.6.37.3-yocto-standard+ (rber@yocto-vm-1) (gcc version 4.5.1 (GCC) ) #1 PREEMPT Mon Jun 13 12:33:45 EEST 2011
  41. CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
  42. CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  43. Machine: OMAP3 Beagle Board
  44. Memory policy: ECC disabled, Data cache writeback
  45. OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
  46. SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
  47. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  48. Kernel command line: console=ttyO2,115200n8 mpurate=500 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
  49. PID hash table entries: 1024 (order: 0, 4096 bytes)
  50. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  51. Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  52. Memory: 256MB = 256MB total
  53. Memory: 254064k/254064k available, 8080k reserved, 0K highmem
  54. Virtual kernel memory layout:
  55. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  56. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  57. DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  58. vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
  59. lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  60. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  61. .init : 0xc0008000 - 0xc004e000 ( 280 kB)
  62. .text : 0xc004e000 - 0xc0514574 (4890 kB)
  63. .data : 0xc0516000 - 0xc0565300 ( 317 kB)
  64. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  65. Preemptable hierarchical RCU implementation.
  66. NR_IRQS:402
  67. Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
  68. Reprogramming SDRC clock to 332000000 Hz
  69. GPMC revision 5.0
  70. IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  71. Total of 96 interrupts on 1 active controller
  72. OMAP GPIO hardware version 2.5
  73. OMAP clockevent source: GPTIMER12 at 32768 Hz
  74. Console: colour dummy device 80x30
  75. Calibrating delay loop... 498.87 BogoMIPS (lpj=1945600)
  76. pid_max: default: 32768 minimum: 301
  77. Security Framework initialized
  78. Mount-cache hash table entries: 512
  79. CPU: Testing write buffer coherency: ok
  80. ftrace: allocating 15305 entries in 30 pages
  81. regulator: core version 0.5
  82. regulator: dummy:
  83. NET: Registered protocol family 16
  84. OMAP3 Beagle Rev: unknown 2
  85. Found NAND on CS0
  86. Registering NAND on CS0
  87. Unable to get DVI reset GPIO
  88. Switched to new clocking rate (Crystal/Core/MPU): 26.0/500/332 MHz
  89. OMAP DMA hardware revision 5.0
  90. bio: create slab <bio-0> at 0
  91. SCSI subsystem initialized
  92. usbcore: registered new interface driver usbfs
  93. usbcore: registered new interface driver hub
  94. usbcore: registered new device driver usb
  95. i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz
  96. twl4030: PIH (irq 7) chaining IRQs 368..375
  97. twl4030: power (irq 373) chaining IRQs 376..383
  98. twl4030: gpio (irq 368) chaining IRQs 384..401
  99. regulator: VUSB1V5: 1500 mV normal standby
  100. regulator: VUSB1V8: 1800 mV normal standby
  101. regulator: VUSB3V1: 3100 mV normal standby
  102. twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  103. regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
  104. regulator: VDAC: 1800 mV normal standby
  105. regulator: VDVI: 1800 mV normal standby
  106. regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
  107. i2c_omap i2c_omap.3: bus 3 rev4.0 at 100 kHz
  108. Advanced Linux Sound Architecture Driver Version 1.0.23.
  109. Switching to clocksource 32k_counter
  110. musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  111. musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  112. NET: Registered protocol family 2
  113. IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  114. TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  115. TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  116. TCP: Hash tables configured (established 8192 bind 8192)
  117. TCP reno registered
  118. UDP hash table entries: 256 (order: 0, 4096 bytes)
  119. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  120. NET: Registered protocol family 1
  121. RPC: Registered udp transport module.
  122. RPC: Registered tcp transport module.
  123. RPC: Registered tcp NFSv4.1 backchannel transport module.
  124. VFS: Disk quotas dquot_6.5.2
  125. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  126. msgmni has been set to 496
  127. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  128. io scheduler noop registered
  129. io scheduler deadline registered
  130. io scheduler cfq registered (default)
  131. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  132. omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  133. omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  134. omap-hsuart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  135. console [ttyO2] enabled
  136. omap-hsuart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
  137. brd: module loaded
  138. usbcore: registered new interface driver kaweth
  139. pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  140. usbcore: registered new interface driver pegasus
  141. usbcore: registered new interface driver asix
  142. usbcore: registered new interface driver cdc_ether
  143. usbcore: registered new interface driver dm9601
  144. usbcore: registered new interface driver smsc75xx
  145. usbcore: registered new interface driver smsc95xx
  146. usbcore: registered new interface driver net1080
  147. usbcore: registered new interface driver cdc_subset
  148. usbcore: registered new interface driver zaurus
  149. usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  150. usbcore: registered new interface driver int51x1
  151. console [netcon0] enabled
  152. netconsole: network logging started
  153. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  154. ehci-omap.0 supply hsusb0 not found, using dummy regulator
  155. ehci-omap.0 supply hsusb1 not found, using dummy regulator
  156. ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  157. ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  158. ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  159. ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  160. hub 1-0:1.0: USB hub found
  161. hub 1-0:1.0: 3 ports detected
  162. Initializing USB Mass Storage driver...
  163. usbcore: registered new interface driver usb-storage
  164. USB Mass Storage support registered.
  165. mice: PS/2 mouse device common for all mice
  166. twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  167. OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  168. cpuidle: using governor ladder
  169. cpuidle: using governor menu
  170. usbcore: registered new interface driver usbhid
  171. usbhid: USB HID core driver
  172. OMAP3 Beagle/Devkit8000 SoC init
  173. asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
  174. ALSA device list:
  175. #0: omap3beagle
  176. TCP cubic registered
  177. NET: Registered protocol family 17
  178. Registering the dns_resolver key type
  179. VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  180. Power Management for TI OMAP3.
  181. clock: disabling unused clocks to save power
  182. regulator_init_complete: incomplete constraints, leaving VDVI on
  183. regulator_init_complete: incomplete constraints, leaving VDAC on
  184. twl_rtc twl_rtc: setting system clock to 2011-06-14 15:24:37 UTC (1308065077)
  185. Waiting for root device /dev/mmcblk0p2...
  186. mmc0: new high speed SDHC card at address 0001
  187. mmcblk0: mmc0:0001 00000 3.79 GiB
  188. mmcblk0: p1 p2
  189. EXT3-fs: barriers not enabled
  190. kjournald starting. Commit interval 5 seconds
  191. EXT3-fs (mmcblk0p2): using internal journal
  192. EXT3-fs (mmcblk0p2): recovery complete
  193. EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  194. VFS: Mounted root (ext3 filesystem) on device 179:2.
  195. Freeing init memory: 280K
  196. INIT: version 2.88 booting
  197. Starting udevudev[55]: starting version 164
  198.  
  199. Configuring network interfaces... ifconfig: SIOCGIFFLAGS: No such device
  200. done.
  201. Tue Jun 14 15:10:00 UTC 2011
  202. INIT: Entering runlevel: 5
  203. Starting syslogd/klogd: done
  204.  
  205. Yocto (Built by Poky 5.0.1) 1.0.1 beagleboard ttyO2
  206.  
  207. beagleboard login: root
  208.  
  209. root@beagleboard:~# /etc/init.d/networking restart
  210. Reconfiguring network interfaces... ifconfig: SIOCGIFFLAGS: No such device
  211. ifconfig: SIOCGIFFLAGS: No such device
  212. done.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!