Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-22-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000004f7f0000 (usable)
- [ 0.000000] BIOS-e820: 000000004f7f0000 - 000000004f7fffc0 (ACPI data)
- [ 0.000000] BIOS-e820: 000000004f7fffc0 - 000000004f800000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
- [ 0.000000] DMI 2.3 present.
- [ 0.000000] last_pfn = 0x4f7f0 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CBFFF write-protect
- [ 0.000000] CC000-DFFFF uncachable
- [ 0.000000] E0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask FC0000000 write-back
- [ 0.000000] 1 base 040000000 mask FF0000000 write-back
- [ 0.000000] 2 base 04F800000 mask FFF800000 uncachable
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] PAT not supported by CPU.
- [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] modified physical RAM map:
- [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
- [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
- [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
- [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
- [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] modified: 0000000000100000 - 000000004f7f0000 (usable)
- [ 0.000000] modified: 000000004f7f0000 - 000000004f7fffc0 (ACPI data)
- [ 0.000000] modified: 000000004f7fffc0 - 000000004f800000 (ACPI NVS)
- [ 0.000000] modified: 00000000ffb80000 - 00000000ffc00000 (reserved)
- [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
- [ 0.000000] initial memory mapped : 0 - 00c00000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] Using x86 segment limits to approximate NX protection
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
- [ 0.000000] RAMDISK: 37856000 - 37fef7dc
- [ 0.000000] Allocated new RAMDISK: 008de000 - 010777dc
- [ 0.000000] Move RAMDISK from 0000000037856000 - 0000000037fef7db to 008de000 - 010777db
- [ 0.000000] ACPI: RSDP 000e6010 00014 (v00 OID_00)
- [ 0.000000] ACPI: RSDT 4f7fcfe0 00030 (v01 INSYDE RSDT_000 00000001 _CSI 00010103)
- [ 0.000000] ACPI: FACP 4f7ffb00 00074 (v01 INSYDE FACP_000 00000100 _CSI 00010103)
- [ 0.000000] ACPI: DSDT 4f7fd020 02AD8 (v01 INSYDE INTELIC4 00001004 INTL 02002025)
- [ 0.000000] ACPI: FACS 4f7fffc0 00040
- [ 0.000000] ACPI: BOOT 4f7ffb90 00028 (v01 INSYDE SYS_BOOT 00000100 _CSI 00010103)
- [ 0.000000] ACPI: DBGP 4f7ffbc0 00034 (v01 INSYDE DBGP_000 00000100 _CSI 00010103)
- [ 0.000000] 383MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] node 0 low ram: 00000000 - 377fe000
- [ 0.000000] node 0 bootmap 00008000 - 0000ef00
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
- [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
- [ 0.000000] #5 [00008da000 - 00008dd104] BRK ==> [00008da000 - 00008dd104]
- [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
- [ 0.000000] #7 [00008de000 - 00010777dc] NEW RAMDISK ==> [00008de000 - 00010777dc]
- [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000000 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x0004f7f0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[3] active PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x00000002
- [ 0.000000] 0: 0x00000006 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x0004f7f0
- [ 0.000000] On node 0 totalpages: 325515
- [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1079000
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3963 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 768 pages used for memmap
- [ 0.000000] HighMem zone: 97522 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
- [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
- [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
- [ 0.000000] APIC: disable apic facility
- [ 0.000000] nr_irqs_gsi: 16
- [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 4f800000 (gap: 4f800000:b0380000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36024 r0 d21320 u4194304
- [ 0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 322971
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=b2e6c7c2-5fe4-40bb-a63c-5bebf60d0eb0 ro quiet splash
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 6512320 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (000377fe:0004f7f0)
- [ 0.000000] Memory: 1267800k/1302464k available (4673k kernel code, 33280k reserved, 2121k data, 656k init, 393160k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
- [ 0.000000] .data : 0xc0590653 - 0xc07a2e48 (2121 kB)
- [ 0.000000] .text : 0xc0100000 - 0xc0590653 (4673 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:2304 nr_irqs:256
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1294.659 MHz processor.
- [ 0.012010] Calibrating delay loop (skipped), value calculated using timer frequency.. 2589.31 BogoMIPS (lpj=5178636)
- [ 0.012043] Security Framework initialized
- [ 0.012094] AppArmor: AppArmor initialized
- [ 0.012107] Mount-cache hash table entries: 512
- [ 0.012331] Initializing cgroup subsys ns
- [ 0.012341] Initializing cgroup subsys cpuacct
- [ 0.012348] Initializing cgroup subsys memory
- [ 0.012364] Initializing cgroup subsys devices
- [ 0.012368] Initializing cgroup subsys freezer
- [ 0.012372] Initializing cgroup subsys net_cls
- [ 0.012410] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.012415] CPU: L2 cache: 1024K
- [ 0.012423] mce: CPU supports 5 MCE banks
- [ 0.012449] Performance Events:
- [ 0.012453] no APIC, boot with the "lapic" boot parameter to force-enable it.
- [ 0.012457] no hardware sampling interrupt available.
- [ 0.012460] p6 PMU driver.
- [ 0.012469] ... version: 0
- [ 0.012472] ... bit width: 32
- [ 0.012475] ... generic registers: 2
- [ 0.012478] ... value mask: 00000000ffffffff
- [ 0.012482] ... max period: 000000007fffffff
- [ 0.012485] ... fixed-purpose events: 0
- [ 0.012488] ... event mask: 0000000000000003
- [ 0.012496] Checking 'hlt' instruction... OK.
- [ 0.029163] SMP alternatives: switching to UP code
- [ 0.039243] Freeing SMP alternatives: 19k freed
- [ 0.039260] ACPI: Core revision 20090903
- [ 0.045265] ACPI: setting ELCR to 0200 (from 0ca8)
- [ 0.048012] ftrace: converting mcount calls to 0f 1f 44 00 00
- [ 0.048019] ftrace: allocating 21771 entries in 43 pages
- [ 0.052107] Enabling APIC mode: Flat. Using 0 I/O APICs
- [ 0.052114] weird, boot CPU (#0) not listed by the BIOS.
- [ 0.052118] SMP motherboard not detected.
- [ 0.052122] Local APIC not detected. Using dummy APIC emulation.
- [ 0.052125] SMP disabled
- [ 0.052290] Brought up 1 CPUs
- [ 0.052294] Total of 1 processors activated (2589.31 BogoMIPS).
- [ 0.053196] CPU0 attaching NULL sched-domain.
- [ 0.053415] devtmpfs: initialized
- [ 0.054032] regulator: core version 0.5
- [ 0.056012] Time: 8:53:17 Date: 05/20/10
- [ 0.056083] NET: Registered protocol family 16
- [ 0.056260] EISA bus registered
- [ 0.056273] ACPI: bus type pci registered
- [ 0.056413] PCI: PCI BIOS revision 2.10 entry at 0xe9854, last bus=1
- [ 0.056417] PCI: Using configuration type 1 for base access
- [ 0.057875] bio: create slab <bio-0> at 0
- [ 0.058522] ACPI: EC: Look up EC in DSDT
- [ 0.061106] ACPI: Interpreter enabled
- [ 0.061116] ACPI: (supports S0 S3 S4 S5)
- [ 0.061147] ACPI: Using PIC for interrupt routing
- [ 0.064449] ACPI: EC: GPE storm detected, transactions will use polling mode
- [ 0.080172] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
- [ 0.083588] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
- [ 0.083788] ACPI: No dock devices found.
- [ 0.083990] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.084168] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xb0000000-0xb7ffffff]
- [ 0.084176] pci 0000:00:02.0: reg 14 32bit mmio: [0xf0000000-0xf007ffff]
- [ 0.084183] pci 0000:00:02.0: reg 18 io port: [0xe000-0xe007]
- [ 0.084206] pci 0000:00:02.0: supports D1
- [ 0.084228] pci 0000:00:02.1: reg 10 32bit mmio pref: [0x000000-0x7ffffff]
- [ 0.084235] pci 0000:00:02.1: reg 14 32bit mmio: [0x000000-0x07ffff]
- [ 0.084260] pci 0000:00:02.1: supports D1
- [ 0.084334] pci 0000:00:1d.0: reg 20 io port: [0x1200-0x121f]
- [ 0.084389] pci 0000:00:1d.1: reg 20 io port: [0x1600-0x161f]
- [ 0.084450] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebff000-0xfebff3ff]
- [ 0.084507] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.084514] pci 0000:00:1d.7: PME# disabled
- [ 0.084601] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
- [ 0.084607] pci 0000:00:1f.0: quirk: region 1300-133f claimed by ICH4 GPIO
- [ 0.084632] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
- [ 0.084640] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
- [ 0.084649] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
- [ 0.084657] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
- [ 0.084665] pci 0000:00:1f.1: reg 20 io port: [0x1100-0x110f]
- [ 0.084674] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
- [ 0.084725] pci 0000:00:1f.3: reg 20 io port: [0x1400-0x141f]
- [ 0.084769] pci 0000:00:1f.5: reg 10 io port: [0xe100-0xe1ff]
- [ 0.084777] pci 0000:00:1f.5: reg 14 io port: [0xe200-0xe23f]
- [ 0.084785] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf0080400-0xf00805ff]
- [ 0.084793] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf0080600-0xf00806ff]
- [ 0.084823] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
- [ 0.084828] pci 0000:00:1f.5: PME# disabled
- [ 0.084859] pci 0000:00:1f.6: reg 10 io port: [0xe300-0xe3ff]
- [ 0.084867] pci 0000:00:1f.6: reg 14 io port: [0xe400-0xe47f]
- [ 0.084904] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
- [ 0.084909] pci 0000:00:1f.6: PME# disabled
- [ 0.084952] pci 0000:01:01.0: reg 10 32bit mmio: [0xe0001000-0xe0001fff]
- [ 0.084996] pci 0000:01:01.0: PME# supported from D0 D3hot D3cold
- [ 0.085002] pci 0000:01:01.0: PME# disabled
- [ 0.085034] pci 0000:01:02.0: reg 10 io port: [0xc000-0xc0ff]
- [ 0.085043] pci 0000:01:02.0: reg 14 32bit mmio: [0xe0000000-0xe00000ff]
- [ 0.085082] pci 0000:01:02.0: supports D1 D2
- [ 0.085086] pci 0000:01:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.085092] pci 0000:01:02.0: PME# disabled
- [ 0.085125] pci 0000:01:03.0: reg 10 32bit mmio: [0x000000-0x000fff]
- [ 0.085144] pci 0000:01:03.0: supports D1 D2
- [ 0.085147] pci 0000:01:03.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.085153] pci 0000:01:03.0: PME# disabled
- [ 0.085191] pci 0000:00:1e.0: transparent bridge
- [ 0.085197] pci 0000:00:1e.0: bridge io port: [0xc000-0xdfff]
- [ 0.085203] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0000000-0xefffffff]
- [ 0.085209] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xa0000000-0xafffffff]
- [ 0.085236] pci_bus 0000:00: on NUMA node 0
- [ 0.085242] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.085311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
- [ 0.089133] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
- [ 0.089276] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7 10 11)
- [ 0.089416] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
- [ 0.089555] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
- [ 0.089685] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *3
- [ 0.089793] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0, disabled.
- [ 0.089900] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0, disabled.
- [ 0.090024] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *7
- [ 0.090166] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.090178] vgaarb: loaded
- [ 0.090357] SCSI subsystem initialized
- [ 0.090433] libata version 3.00 loaded.
- [ 0.090537] usbcore: registered new interface driver usbfs
- [ 0.090557] usbcore: registered new interface driver hub
- [ 0.090593] usbcore: registered new device driver usb
- [ 0.090787] ACPI: WMI: Mapper loaded
- [ 0.090791] PCI: Using ACPI for IRQ routing
- [ 0.090991] NetLabel: Initializing
- [ 0.090994] NetLabel: domain hash size = 128
- [ 0.090997] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.091021] NetLabel: unlabeled traffic allowed by default
- [ 0.091067] Switching to clocksource tsc
- [ 0.092000] AppArmor: AppArmor Filesystem Enabled
- [ 0.092000] pnp: PnP ACPI init
- [ 0.092000] ACPI: bus type pnp registered
- [ 0.106171] pnp: PnP ACPI: found 10 devices
- [ 0.106175] ACPI: ACPI bus type pnp unregistered
- [ 0.106181] PnPBIOS: Disabled by ACPI PNP
- [ 0.106200] system 00:05: iomem range 0xfff80000-0xffffffff has been reserved
- [ 0.106210] system 00:07: ioport range 0x680-0x6ff has been reserved
- [ 0.106215] system 00:07: ioport range 0x200-0x20f has been reserved
- [ 0.106220] system 00:07: ioport range 0x290-0x297 has been reserved
- [ 0.106225] system 00:07: ioport range 0x1000-0x107f has been reserved
- [ 0.106229] system 00:07: ioport range 0x1300-0x133f has been reserved
- [ 0.106234] system 00:07: ioport range 0x77c-0x77f has been reserved
- [ 0.141025] pci 0000:01:03.0: CardBus bridge, secondary bus 0000:02
- [ 0.141030] pci 0000:01:03.0: IO window: 0x00c400-0x00c4ff
- [ 0.141036] pci 0000:01:03.0: IO window: 0x00c800-0x00c8ff
- [ 0.141042] pci 0000:01:03.0: PREFETCH window: 0xa0000000-0xa3ffffff
- [ 0.141048] pci 0000:01:03.0: MEM window: 0xe4000000-0xe7ffffff
- [ 0.141054] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
- [ 0.141059] pci 0000:00:1e.0: IO window: 0xc000-0xdfff
- [ 0.141066] pci 0000:00:1e.0: MEM window: 0xe0000000-0xefffffff
- [ 0.141073] pci 0000:00:1e.0: PREFETCH window: 0xa0000000-0xafffffff
- [ 0.141091] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.141332] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
- [ 0.141336] PCI: setting IRQ 5 as level-triggered
- [ 0.141342] pci 0000:01:03.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
- [ 0.141352] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.141357] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- [ 0.141362] pci_bus 0000:01: resource 0 io: [0xc000-0xdfff]
- [ 0.141366] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xefffffff]
- [ 0.141371] pci_bus 0000:01: resource 2 pref mem [0xa0000000-0xafffffff]
- [ 0.141375] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
- [ 0.141379] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
- [ 0.141384] pci_bus 0000:02: resource 0 io: [0xc400-0xc4ff]
- [ 0.141388] pci_bus 0000:02: resource 1 io: [0xc800-0xc8ff]
- [ 0.141392] pci_bus 0000:02: resource 2 pref mem [0xa0000000-0xa3ffffff]
- [ 0.141397] pci_bus 0000:02: resource 3 mem: [0xe4000000-0xe7ffffff]
- [ 0.141454] NET: Registered protocol family 2
- [ 0.141613] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.142157] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.143686] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.144781] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.144787] TCP reno registered
- [ 0.145061] NET: Registered protocol family 1
- [ 0.145108] pci 0000:00:02.0: Boot video device
- [ 0.145367] Simple Boot Flag at 0x37 set to 0x1
- [ 0.145512] cpufreq-nforce2: No nForce2 chipset.
- [ 0.145551] Scanning for low memory corruption every 60 seconds
- [ 0.145763] audit: initializing netlink socket (disabled)
- [ 0.145795] type=2000 audit(1274345597.144:1): initialized
- [ 0.162331] Trying to unpack rootfs image as initramfs...
- [ 0.181650] highmem bounce pool size: 64 pages
- [ 0.181660] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.184489] VFS: Disk quotas dquot_6.5.2
- [ 0.184600] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.189410] fuse init (API version 7.13)
- [ 0.189611] msgmni has been set to 1710
- [ 0.193040] alg: No test for stdrng (krng)
- [ 0.193178] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.193183] io scheduler noop registered
- [ 0.193186] io scheduler anticipatory registered
- [ 0.193190] io scheduler deadline registered
- [ 0.193277] io scheduler cfq registered (default)
- [ 0.193461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.193497] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.329196] ACPI: AC Adapter [AC] (on-line)
- [ 0.329343] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
- [ 0.329355] ACPI: Sleep Button [SBTN]
- [ 0.329422] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
- [ 0.345041] ACPI: Lid Switch [LID]
- [ 0.345209] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 0.345216] ACPI: Power Button [PWRF]
- [ 0.345464] Marking TSC unstable due to TSC halts in idle
- [ 0.345537] processor LNXCPU:00: registered as cooling_device0
- [ 0.349190] Switching to clocksource acpi_pm
- [ 0.372924] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.373474] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
- [ 0.373484] serial 0000:00:1f.6: PCI INT B disabled
- [ 0.375050] brd: module loaded
- [ 0.375823] loop: module loaded
- [ 0.375966] input: Macintosh mouse button emulation as /devices/virtual/input/input3
- [ 0.376238] isapnp: Scanning for PnP cards...
- [ 0.381909] ata_piix 0000:00:1f.1: version 2.13
- [ 0.381923] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
- [ 0.382184] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
- [ 0.382188] PCI: setting IRQ 11 as level-triggered
- [ 0.382195] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
- [ 0.382249] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 0.384072] scsi0 : ata_piix
- [ 0.388587] scsi1 : ata_piix
- [ 0.390044] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
- [ 0.390049] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
- [ 0.390678] Fixed MDIO Bus: probed
- [ 0.390737] PPP generic driver version 2.4.2
- [ 0.390852] tun: Universal TUN/TAP device driver, 1.6
- [ 0.390855] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.391003] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.391248] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
- [ 0.391253] PCI: setting IRQ 10 as level-triggered
- [ 0.391260] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
- [ 0.391287] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 0.391292] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 0.391345] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- [ 0.391384] ehci_hcd 0000:00:1d.7: debug port 1
- [ 0.395278] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 0.395344] ACPI: Battery Slot [BAT0] (battery absent)
- [ 0.444097] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xfebff000
- [ 0.456303] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.456536] usb usb1: configuration #1 chosen from 1 choice
- [ 0.456584] hub 1-0:1.0: USB hub found
- [ 0.456600] hub 1-0:1.0: 4 ports detected
- [ 0.456695] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.456729] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.457117] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
- [ 0.457124] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
- [ 0.457136] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.457142] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.457216] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 0.457248] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200
- [ 0.457396] usb usb2: configuration #1 chosen from 1 choice
- [ 0.457439] hub 2-0:1.0: USB hub found
- [ 0.457450] hub 2-0:1.0: 2 ports detected
- [ 0.457725] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
- [ 0.457731] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
- [ 0.457740] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 0.457745] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.457802] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- [ 0.457829] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001600
- [ 0.457973] usb usb3: configuration #1 chosen from 1 choice
- [ 0.458014] hub 3-0:1.0: USB hub found
- [ 0.458024] hub 3-0:1.0: 2 ports detected
- [ 0.458175] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 0.465706] i8042.c: Detected active multiplexing controller, rev 1.1.
- [ 0.484833] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.484855] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 0.484927] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 0.484963] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 0.485005] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 0.485242] mice: PS/2 mouse device common for all mice
- [ 0.485463] rtc_cmos 00:03: RTC can wake from S4
- [ 0.485537] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 0.485559] rtc0: alarms up to one month, 242 bytes nvram
- [ 0.485804] device-mapper: uevent: version 1.0.3
- [ 0.486009] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- [ 0.487253] device-mapper: multipath: version 1.1.0 loaded
- [ 0.487258] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 0.488174] EISA: Probing bus 0 at eisa.0
- [ 0.488184] Cannot allocate resource for EISA slot 1
- [ 0.488215] EISA: Detected 0 cards.
- [ 0.491532] cpuidle: using governor ladder
- [ 0.491625] cpuidle: using governor menu
- [ 0.492482] TCP cubic registered
- [ 0.492777] NET: Registered protocol family 10
- [ 0.493553] lo: Disabled Privacy Extensions
- [ 0.494100] NET: Registered protocol family 17
- [ 0.494177] Using IPI No-Shortcut mode
- [ 0.494329] PM: Resume from disk failed.
- [ 0.494352] registered taskstats version 1
- [ 0.494638] Magic number: 10:681:877
- [ 0.494770] rtc_cmos 00:03: setting system clock to 2010-05-20 08:53:17 UTC (1274345597)
- [ 0.494776] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.494778] EDD information not available.
- [ 0.502973] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 0.562918] ata1.00: ATA-7: SAMSUNG MP0402H, UC100-19, max UDMA/100
- [ 0.562925] ata1.00: 78242976 sectors, multi 16: LBA48
- [ 0.569027] ata1.00: configured for UDMA/100
- [ 0.600431] ata2.00: ATAPI: MATSHITADVD-ROM SR-8177, NZ15, max UDMA/33
- [ 0.652532] ata2.00: configured for UDMA/33
- [ 0.735461] Freeing initrd memory: 7781k freed
- [ 0.917549] isapnp: No Plug & Play device found
- [ 0.917837] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0402H UC10 PQ: 0 ANSI: 5
- [ 0.918152] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 0.918435] sd 0:0:0:0: [sda] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
- [ 0.918508] sd 0:0:0:0: [sda] Write Protect is off
- [ 0.918512] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.918549] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.918774] sda:
- [ 0.919984] scsi 1:0:0:0: CD-ROM MATSHITA DVD-ROM SR-8177 NZ15 PQ: 0 ANSI: 5
- [ 0.923532] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
- [ 0.923537] Uniform CD-ROM driver Revision: 3.20
- [ 0.923708] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 0.923789] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 0.926798] sda1 sda2 sda3
- [ 0.927982] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 0.928032] Freeing unused kernel memory: 656k freed
- [ 0.928626] Write protecting the kernel text: 4676k
- [ 0.928684] Write protecting the kernel read-only data: 1840k
- [ 0.954197] udev: starting version 151
- [ 1.252807] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
- [ 1.253127] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
- [ 1.253135] via-rhine 0000:01:02.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
- [ 1.253144] via-rhine 0000:01:02.0: setting latency timer to 64
- [ 1.259501] eth0: VIA Rhine III at 0xe0000000, 00:40:d0:80:d3:a8, IRQ 11.
- [ 1.260217] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
- [ 1.480525] kjournald starting. Commit interval 5 seconds
- [ 1.480540] EXT3-fs: mounted filesystem with ordered data mode.
- [ 3.341266] Adding 1951856k swap on /dev/sda1. Priority:-1 extents:1 across:1951856k
- [ 3.927756] udev: starting version 151
- [ 4.974319] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 5.619931] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
- [ 5.622778] acpi device:03: registered as cooling_device1
- [ 5.624446] lp: driver loaded but no devices found
- [ 5.628718] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
- [ 5.628961] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 6.022727] yenta_cardbus 0000:01:03.0: CardBus bridge found [1071:8089]
- [ 6.022749] yenta_cardbus 0000:01:03.0: Enabling burst memory read transactions
- [ 6.022756] yenta_cardbus 0000:01:03.0: Using CSCINT to route CSC interrupts to PCI
- [ 6.022760] yenta_cardbus 0000:01:03.0: Routing CardBus interrupts to PCI
- [ 6.022766] yenta_cardbus 0000:01:03.0: TI: mfunc 0x01111c02, devctl 0x64
- [ 6.076732] lib80211: common routines for IEEE802.11 drivers
- [ 6.076739] lib80211_crypt: registered algorithm 'NULL'
- [ 6.252472] yenta_cardbus 0000:01:03.0: ISA IRQ mask 0x00d8, PCI irq 5
- [ 6.252479] yenta_cardbus 0000:01:03.0: Socket status: 30000006
- [ 6.252486] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05
- [ 6.252502] yenta_cardbus 0000:01:03.0: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff
- [ 6.252508] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xdfff: clean.
- [ 6.253688] yenta_cardbus 0000:01:03.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xefffffff
- [ 6.253693] yenta_cardbus 0000:01:03.0: pcmcia: parent PCI bridge Memory window: 0xa0000000 - 0xafffffff
- [ 6.529671] Linux agpgart interface v0.103
- [ 6.537673] intel_rng: Firmware space is locked read-only. If you can't or
- [ 6.537677] intel_rng: don't want to disable this in firmware setup, and if
- [ 6.537679] intel_rng: you are certain that your system has a functional
- [ 6.537681] intel_rng: RNG, try using the 'no_fwh_detect' option.
- [ 6.540150] ieee80211: 802.11 data/management/control stack, git-1.1.13
- [ 6.540156] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
- [ 6.650408] [drm] Initialized drm 1.1.0 20060810
- [ 6.651545] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
- [ 6.652086] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
- [ 6.655249] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xb0000000
- [ 6.904706] type=1505 audit(1274345603.909:2): operation="profile_load" pid=486 name="/sbin/dhclient3"
- [ 6.905642] type=1505 audit(1274345603.909:3): operation="profile_load" pid=486 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 6.906148] type=1505 audit(1274345603.909:4): operation="profile_load" pid=486 name="/usr/lib/connman/scripts/dhclient-script"
- [ 6.907250] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
- [ 6.907255] ipw2200: Copyright(c) 2003-2006 Intel Corporation
- [ 6.907352] ipw2200 0000:01:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
- [ 6.907455] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
- [ 6.907523] ipw2200 0000:01:01.0: firmware: requesting ipw2200-bss.fw
- [ 7.230377] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x256eb1, caps: 0x804713/0x0
- [ 7.350773] i915 0000:00:02.0: power state changed by ACPI to D0
- [ 7.350792] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
- [ 7.350799] i915 0000:00:02.0: setting latency timer to 64
- [ 7.362985] [drm] set up 7M of stolen space
- [ 7.397756] [drm] initialized overlay support
- [ 7.648198] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input6
- [ 7.725212] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
- [ 7.845511] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
- [ 7.847128] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
- [ 7.847853] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
- [ 7.848484] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
- [ 7.849302] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
- [ 8.311402] fb0: inteldrmfb frame buffer device
- [ 8.311407] registered panic notifier
- [ 8.311420] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 8.441278] vga16fb: initializing
- [ 8.441285] vga16fb: mapped to 0xc00a0000
- [ 8.441293] vga16fb: not registering due to another framebuffer present
- [ 8.542857] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
- [ 8.542902] Intel ICH 0000:00:1f.5: setting latency timer to 64
- [ 9.026737] Console: switching to colour frame buffer device 128x48
- [ 9.368674] intel8x0_measure_ac97_clock: measured 56011 usecs (2699 samples)
- [ 9.368681] intel8x0: clocking to 48000
- [ 11.624495] EXT3 FS on sda2, internal journal
- [ 12.938128] kjournald starting. Commit interval 5 seconds
- [ 12.938381] EXT3 FS on sda3, internal journal
- [ 12.938389] EXT3-fs: mounted filesystem with ordered data mode.
- [ 14.824941] type=1505 audit(1274345611.829:5): operation="profile_load" pid=712 name="/usr/share/gdm/guest-session/Xsession"
- [ 14.827786] type=1505 audit(1274345611.829:6): operation="profile_replace" pid=713 name="/sbin/dhclient3"
- [ 14.829142] type=1505 audit(1274345611.833:7): operation="profile_replace" pid=713 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 14.829661] type=1505 audit(1274345611.833:8): operation="profile_replace" pid=713 name="/usr/lib/connman/scripts/dhclient-script"
- [ 14.950570] type=1505 audit(1274345611.953:9): operation="profile_load" pid=714 name="/usr/bin/evince"
- [ 14.963156] type=1505 audit(1274345611.965:10): operation="profile_load" pid=714 name="/usr/bin/evince-previewer"
- [ 14.972067] type=1505 audit(1274345611.977:11): operation="profile_load" pid=714 name="/usr/bin/evince-thumbnailer"
- [ 15.065019] type=1505 audit(1274345612.069:12): operation="profile_load" pid=716 name="/usr/lib/cups/backend/cups-pdf"
- [ 15.066162] type=1505 audit(1274345612.069:13): operation="profile_load" pid=716 name="/usr/sbin/cupsd"
- [ 15.147855] type=1505 audit(1274345612.149:14): operation="profile_load" pid=717 name="/usr/sbin/mysqld-akonadi"
- [ 16.322104] eth0: link down
- [ 16.322438] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 18.129286] ppdev: user-space parallel port driver
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement