Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.38-999-generic (root@zinc) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #201103191005 SMP Sat Mar 19 11:31:29 UTC 2011
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
- [ 0.000000] BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
- [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
- [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
- [ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
- [ 0.000000] BIOS-e820: 0000000040200000 - 0000000076595000 (usable)
- [ 0.000000] BIOS-e820: 0000000076595000 - 00000000765e6000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000765e6000 - 0000000076609000 (reserved)
- [ 0.000000] BIOS-e820: 0000000076609000 - 000000007660b000 (usable)
- [ 0.000000] BIOS-e820: 000000007660b000 - 0000000076619000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 0000000076619000 - 000000007663b000 (reserved)
- [ 0.000000] BIOS-e820: 000000007663b000 - 000000007667e000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000007667e000 - 0000000076800000 (usable)
- [ 0.000000] BIOS-e820: 0000000077000000 - 000000007f200000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000100600000 (usable)
- [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
- [ 0.000000] DMI 2.6 present.
- [ 0.000000] DMI: MSI MS-7680/H67MS-E33 (MS-7680), BIOS V1.1 01/10/2011
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] last_pfn = 0x76800 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-E7FFF uncachable
- [ 0.000000] E8000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F00000000 write-back
- [ 0.000000] 1 base 100000000 mask FFFC00000 write-back
- [ 0.000000] 2 base 100400000 mask FFFE00000 write-back
- [ 0.000000] 3 base 077000000 mask FFF000000 uncachable
- [ 0.000000] 4 base 078000000 mask FF8000000 uncachable
- [ 0.000000] 5 base 080000000 mask F80000000 uncachable
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] 8 disabled
- [ 0.000000] 9 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 0000000077000000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] found SMP MP-table at [c00fcd00] fcd00
- [ 0.000000] initial memory mapped : 0 - 01c00000
- [ 0.000000] Base memory trampoline at [c0098000] 98000 size 16384
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
- [ 0.000000] RAMDISK: 3671e000 - 37387000
- [ 0.000000] ACPI: RSDP 000f0430 00024 (v02 ALASKA)
- [ 0.000000] ACPI: XSDT 765de068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: FACP 765e4c00 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: DSDT 765de150 06AAB (v02 ALASKA A M I 00000011 INTL 20051117)
- [ 0.000000] ACPI: FACS 76610f80 00040
- [ 0.000000] ACPI: APIC 765e4cf8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
- [ 0.000000] ACPI: SSDT 765e4d70 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
- [ 0.000000] ACPI: MCFG 765e4e78 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
- [ 0.000000] ACPI: HPET 765e4eb8 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
- [ 0.000000] ACPI: ASF! 765e4ef0 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 1008MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x00076800
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[6] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009c
- [ 0.000000] 0: 0x00000100 -> 0x00020000
- [ 0.000000] 0: 0x00020200 -> 0x00040000
- [ 0.000000] 0: 0x00040200 -> 0x00076595
- [ 0.000000] 0: 0x00076609 -> 0x0007660b
- [ 0.000000] 0: 0x0007667e -> 0x00076800
- [ 0.000000] On node 0 totalpages: 484005
- [ 0.000000] free_area_init_node: node 0, pgdat c179bc80, node_mem_map f584e200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3948 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 220974 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 2017 pages used for memmap
- [ 0.000000] HighMem zone: 255290 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
- [ 0.000000] Allocating PCI resources starting at 7f200000 (gap: 7f200000:7fb1c000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 13 pages/cpu @f5400000 s28928 r0 d24320 u1048576
- [ 0.000000] pcpu-alloc: s28928 r0 d24320 u1048576 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 480212
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-999-generic root=UUID=5dad2a58-c598-4199-ad72-651ae03fd50e ro splash quiet drm.debug=7 vt.handoff=7
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
- [ 0.000000] allocated 9707200 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (000377fe:00076800)
- [ 0.000000] Memory: 1888092k/1941504k available (5240k kernel code, 47928k reserved, 2584k data, 780k init, 1029228k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc17a5000 - 0xc1868000 ( 780 kB)
- [ 0.000000] .data : 0xc151e215 - 0xc17a42c0 (2584 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc151e215 (5240 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU-based detection of stalled CPUs is disabled.
- [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
- [ 0.000000] CPU 0 irqstacks, hard=f4408000 soft=f440a000
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.004000] Detected 3292.233 MHz processor.
- [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.46 BogoMIPS (lpj=13168932)
- [ 0.000004] pid_max: default: 32768 minimum: 301
- [ 0.000018] Security Framework initialized
- [ 0.000029] AppArmor: AppArmor initialized
- [ 0.000058] Mount-cache hash table entries: 512
- [ 0.000140] Initializing cgroup subsys ns
- [ 0.000142] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
- [ 0.000144] Initializing cgroup subsys cpuacct
- [ 0.000147] Initializing cgroup subsys memory
- [ 0.000152] Initializing cgroup subsys devices
- [ 0.000154] Initializing cgroup subsys freezer
- [ 0.000155] Initializing cgroup subsys net_cls
- [ 0.000156] Initializing cgroup subsys blkio
- [ 0.000178] CPU: Physical Processor ID: 0
- [ 0.000179] CPU: Processor Core ID: 0
- [ 0.000184] mce: CPU supports 9 MCE banks
- [ 0.000194] CPU0: Thermal monitoring enabled (TM1)
- [ 0.000200] using mwait in idle threads.
- [ 0.002472] ACPI: Core revision 20110112
- [ 0.228671] ftrace: allocating 27539 entries in 54 pages
- [ 0.236445] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.236781] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.276460] CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz stepping 07
- [ 0.384369] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
- [ 0.384375] ... version: 3
- [ 0.384375] ... bit width: 48
- [ 0.384376] ... generic registers: 8
- [ 0.384377] ... value mask: 0000ffffffffffff
- [ 0.384378] ... max period: 000000007fffffff
- [ 0.384379] ... fixed-purpose events: 3
- [ 0.384380] ... event mask: 00000007000000ff
- [ 0.384486] CPU 1 irqstacks, hard=f44d2000 soft=f44d4000
- [ 0.384487] Booting Node 0, Processors #1
- [ 0.384489] smpboot cpu 1: start_ip = 98000
- [ 0.394983] Initializing CPU#1
- [ 0.492492] CPU 2 irqstacks, hard=f44de000 soft=f44e0000
- [ 0.492494] #2
- [ 0.492494] smpboot cpu 2: start_ip = 98000
- [ 0.502613] Initializing CPU#2
- [ 0.600496] CPU 3 irqstacks, hard=f44ea000 soft=f44f0000
- [ 0.600497] #3 Ok.
- [ 0.600498] smpboot cpu 3: start_ip = 98000
- [ 0.610716] Initializing CPU#3
- [ 0.708449] Brought up 4 CPUs
- [ 0.708451] Total of 4 processors activated (26338.66 BogoMIPS).
- [ 0.710071] devtmpfs: initialized
- [ 0.710760] print_constraints: dummy:
- [ 0.710786] Time: 10:42:23 Date: 03/20/11
- [ 0.710809] NET: Registered protocol family 16
- [ 0.710863] EISA bus registered
- [ 0.710868] ACPI: bus type pci registered
- [ 0.710911] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.710914] PCI: not using MMCONFIG
- [ 0.723245] PCI: Using configuration type 1 for base access
- [ 0.723760] bio: create slab <bio-0> at 0
- [ 0.724636] ACPI: EC: Look up EC in DSDT
- [ 0.725576] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.727712] ACPI: SSDT 7660fc18 0038C (v01 AMI IST 00000001 MSFT 03000001)
- [ 0.727951] ACPI: Dynamic OEM Table Load:
- [ 0.727953] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
- [ 0.727972] ACPI: SSDT 76610e18 00084 (v01 AMI CST 00000001 MSFT 03000001)
- [ 0.728167] ACPI: Dynamic OEM Table Load:
- [ 0.728169] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
- [ 0.728580] ACPI: Interpreter enabled
- [ 0.728582] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.728597] ACPI: Using IOAPIC for interrupt routing
- [ 0.728612] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.728657] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.728658] PCI: Using MMCONFIG for extended config space
- [ 0.728803] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.740435] ACPI: No dock devices found.
- [ 0.740437] HEST: Table not found.
- [ 0.740439] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.740575] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.740725] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
- [ 0.740727] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
- [ 0.740728] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.740730] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
- [ 0.740731] pci_root PNP0A08:00: host bridge window [mem 0x7f200000-0xffffffff]
- [ 0.740735] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000c8000-0x000dffff] conflicts with Video ROM [mem 0x000c0000-0x000cd7ff]
- [ 0.740746] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
- [ 0.740774] pci 0000:00:02.0: [8086:0112] type 0 class 0x000300
- [ 0.740783] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
- [ 0.740788] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.740791] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
- [ 0.740848] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
- [ 0.740879] pci 0000:00:16.0: reg 10: [mem 0xfe407000-0xfe40700f 64bit]
- [ 0.740965] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.740970] pci 0000:00:16.0: PME# disabled
- [ 0.741012] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
- [ 0.741040] pci 0000:00:1a.0: reg 10: [mem 0xfe406000-0xfe4063ff]
- [ 0.741142] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.741146] pci 0000:00:1a.0: PME# disabled
- [ 0.741176] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
- [ 0.741197] pci 0000:00:1b.0: reg 10: [mem 0xfe400000-0xfe403fff 64bit]
- [ 0.741276] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.741280] pci 0000:00:1b.0: PME# disabled
- [ 0.741307] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
- [ 0.741395] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.741399] pci 0000:00:1c.0: PME# disabled
- [ 0.741432] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
- [ 0.741519] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.741524] pci 0000:00:1c.4: PME# disabled
- [ 0.741563] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
- [ 0.741591] pci 0000:00:1d.0: reg 10: [mem 0xfe405000-0xfe4053ff]
- [ 0.741693] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.741698] pci 0000:00:1d.0: PME# disabled
- [ 0.741726] pci 0000:00:1f.0: [8086:1c4a] type 0 class 0x000601
- [ 0.741872] pci 0000:00:1f.2: [8086:1c00] type 0 class 0x000101
- [ 0.741894] pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117]
- [ 0.741904] pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103]
- [ 0.741915] pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7]
- [ 0.741926] pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3]
- [ 0.741937] pci 0000:00:1f.2: reg 20: [io 0xf0d0-0xf0df]
- [ 0.741948] pci 0000:00:1f.2: reg 24: [io 0xf0c0-0xf0cf]
- [ 0.741999] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
- [ 0.742020] pci 0000:00:1f.3: reg 10: [mem 0xfe404000-0xfe4040ff 64bit]
- [ 0.742050] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
- [ 0.742094] pci 0000:00:1f.5: [8086:1c08] type 0 class 0x000101
- [ 0.742115] pci 0000:00:1f.5: reg 10: [io 0xf0b0-0xf0b7]
- [ 0.742126] pci 0000:00:1f.5: reg 14: [io 0xf0a0-0xf0a3]
- [ 0.742137] pci 0000:00:1f.5: reg 18: [io 0xf090-0xf097]
- [ 0.742148] pci 0000:00:1f.5: reg 1c: [io 0xf080-0xf083]
- [ 0.742158] pci 0000:00:1f.5: reg 20: [io 0xf070-0xf07f]
- [ 0.742169] pci 0000:00:1f.5: reg 24: [io 0xf060-0xf06f]
- [ 0.742277] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
- [ 0.742282] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
- [ 0.742286] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- [ 0.742294] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- [ 0.742381] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
- [ 0.742405] pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff]
- [ 0.742447] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
- [ 0.742473] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
- [ 0.742547] pci 0000:02:00.0: supports D1 D2
- [ 0.742549] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.742554] pci 0000:02:00.0: PME# disabled
- [ 0.748359] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
- [ 0.748363] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
- [ 0.748368] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- [ 0.748375] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.748390] pci_bus 0000:00: on NUMA node 0
- [ 0.748392] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.748481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
- [ 0.748501] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
- [ 0.748585] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.750999] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.751031] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
- [ 0.751062] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
- [ 0.751092] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
- [ 0.751123] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
- [ 0.751154] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
- [ 0.751184] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.751214] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
- [ 0.751266] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.751270] vgaarb: loaded
- [ 0.751378] SCSI subsystem initialized
- [ 0.751399] libata version 3.00 loaded.
- [ 0.751424] usbcore: registered new interface driver usbfs
- [ 0.751431] usbcore: registered new interface driver hub
- [ 0.751442] usbcore: registered new device driver usb
- [ 0.751498] wmi: Mapper loaded
- [ 0.751499] PCI: Using ACPI for IRQ routing
- [ 0.751501] PCI: pci_cache_line_size set to 64 bytes
- [ 0.751550] reserve RAM buffer: 000000000009c000 - 000000000009ffff
- [ 0.751552] reserve RAM buffer: 0000000076595000 - 0000000077ffffff
- [ 0.751554] reserve RAM buffer: 000000007660b000 - 0000000077ffffff
- [ 0.751556] reserve RAM buffer: 0000000076800000 - 0000000077ffffff
- [ 0.751611] NetLabel: Initializing
- [ 0.751612] NetLabel: domain hash size = 128
- [ 0.751613] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.751620] NetLabel: unlabeled traffic allowed by default
- [ 0.751643] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.751648] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.753663] Switching to clocksource hpet
- [ 0.756347] Switched to NOHz mode on CPU #0
- [ 0.756426] Switched to NOHz mode on CPU #1
- [ 0.756436] Switched to NOHz mode on CPU #2
- [ 0.756449] Switched to NOHz mode on CPU #3
- [ 0.757773] AppArmor: AppArmor Filesystem Enabled
- [ 0.757783] pnp: PnP ACPI init
- [ 0.757789] ACPI: bus type pnp registered
- [ 0.757874] pnp 00:00: [bus 00-ff]
- [ 0.757876] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.757877] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.757878] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.757880] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.757881] pnp 00:00: [mem 0x000c8000-0x000dffff window]
- [ 0.757883] pnp 00:00: [mem 0x7f200000-0xffffffff window]
- [ 0.757884] pnp 00:00: [mem 0x00000000 window]
- [ 0.757913] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.757952] pnp 00:01: [mem 0xfed10000-0xfed19fff]
- [ 0.757953] pnp 00:01: [mem 0xe0000000-0xefffffff]
- [ 0.757955] pnp 00:01: [mem 0xfed90000-0xfed93fff]
- [ 0.757956] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
- [ 0.757957] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
- [ 0.757978] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
- [ 0.757980] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.757982] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 0.757983] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.757985] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
- [ 0.757987] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.758113] pnp 00:02: [io 0x0000-0xffffffff disabled]
- [ 0.758115] pnp 00:02: [io 0x0a00-0x0a0f]
- [ 0.758116] pnp 00:02: [io 0x0000-0xffffffff disabled]
- [ 0.758117] pnp 00:02: [io 0x0778-0x077f]
- [ 0.758137] system 00:02: [io 0x0a00-0x0a0f] has been reserved
- [ 0.758139] system 00:02: [io 0x0778-0x077f] has been reserved
- [ 0.758141] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.758155] pnp 00:03: [io 0x0060]
- [ 0.758157] pnp 00:03: [io 0x0064]
- [ 0.758163] pnp 00:03: [irq 1]
- [ 0.758176] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
- [ 0.758199] pnp 00:04: [irq 12]
- [ 0.758211] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
- [ 0.758397] pnp 00:05: [io 0x03f8-0x03ff]
- [ 0.758401] pnp 00:05: [irq 4]
- [ 0.758402] pnp 00:05: [dma 0 disabled]
- [ 0.758434] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.758441] pnp 00:06: [dma 4]
- [ 0.758442] pnp 00:06: [io 0x0000-0x000f]
- [ 0.758444] pnp 00:06: [io 0x0081-0x0083]
- [ 0.758446] pnp 00:06: [io 0x0087]
- [ 0.758447] pnp 00:06: [io 0x0089-0x008b]
- [ 0.758448] pnp 00:06: [io 0x008f]
- [ 0.758449] pnp 00:06: [io 0x00c0-0x00df]
- [ 0.758463] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.758470] pnp 00:07: [io 0x0070-0x0071]
- [ 0.758474] pnp 00:07: [irq 8]
- [ 0.758486] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.758491] pnp 00:08: [io 0x0061]
- [ 0.758503] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.758513] pnp 00:09: [io 0x0010-0x001f]
- [ 0.758515] pnp 00:09: [io 0x0022-0x003f]
- [ 0.758516] pnp 00:09: [io 0x0044-0x005f]
- [ 0.758517] pnp 00:09: [io 0x0062-0x0063]
- [ 0.758518] pnp 00:09: [io 0x0065-0x006f]
- [ 0.758519] pnp 00:09: [io 0x0072-0x007f]
- [ 0.758520] pnp 00:09: [io 0x0080]
- [ 0.758521] pnp 00:09: [io 0x0084-0x0086]
- [ 0.758523] pnp 00:09: [io 0x0088]
- [ 0.758524] pnp 00:09: [io 0x008c-0x008e]
- [ 0.758525] pnp 00:09: [io 0x0090-0x009f]
- [ 0.758526] pnp 00:09: [io 0x00a2-0x00bf]
- [ 0.758527] pnp 00:09: [io 0x00e0-0x00ef]
- [ 0.758528] pnp 00:09: [io 0x04d0-0x04d1]
- [ 0.758555] system 00:09: [io 0x04d0-0x04d1] has been reserved
- [ 0.758557] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.758562] pnp 00:0a: [io 0x00f0-0x00ff]
- [ 0.758566] pnp 00:0a: [irq 13]
- [ 0.758579] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.758827] pnp 00:0b: [io 0x0378-0x037f]
- [ 0.758831] pnp 00:0b: [irq 5]
- [ 0.758832] pnp 00:0b: [dma 3]
- [ 0.758928] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active)
- [ 0.759044] pnp 00:0c: [io 0x0400-0x0453]
- [ 0.759045] pnp 00:0c: [io 0x0458-0x047f]
- [ 0.759046] pnp 00:0c: [io 0x1180-0x119f]
- [ 0.759047] pnp 00:0c: [io 0x0500-0x057f]
- [ 0.759049] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
- [ 0.759050] pnp 00:0c: [mem 0xfec00000-0xfecfffff]
- [ 0.759051] pnp 00:0c: [mem 0xfed08000-0xfed08fff]
- [ 0.759053] pnp 00:0c: [mem 0xff000000-0xffffffff]
- [ 0.759076] system 00:0c: [io 0x0400-0x0453] has been reserved
- [ 0.759077] system 00:0c: [io 0x0458-0x047f] has been reserved
- [ 0.759079] system 00:0c: [io 0x1180-0x119f] has been reserved
- [ 0.759080] system 00:0c: [io 0x0500-0x057f] has been reserved
- [ 0.759082] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.759084] system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved
- [ 0.759086] system 00:0c: [mem 0xfed08000-0xfed08fff] has been reserved
- [ 0.759088] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
- [ 0.759090] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.759113] pnp 00:0d: [io 0x0454-0x0457]
- [ 0.759134] system 00:0d: [io 0x0454-0x0457] has been reserved
- [ 0.759136] system 00:0d: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 0.759209] pnp 00:0e: [mem 0xfed00000-0xfed003ff]
- [ 0.759232] pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.759337] pnp: PnP ACPI: found 15 devices
- [ 0.759338] ACPI: ACPI bus type pnp unregistered
- [ 0.759340] PnPBIOS: Disabled by ACPI PNP
- [ 0.794593] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
- [ 0.794595] pci 0000:00:1c.0: bridge window [io disabled]
- [ 0.794601] pci 0000:00:1c.0: bridge window [mem disabled]
- [ 0.794605] pci 0000:00:1c.0: bridge window [mem pref disabled]
- [ 0.794612] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
- [ 0.794615] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
- [ 0.794621] pci 0000:00:1c.4: bridge window [mem disabled]
- [ 0.794625] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.794642] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.794647] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.794653] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.794657] pci 0000:00:1c.4: setting latency timer to 64
- [ 0.794660] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.794662] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.794663] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.794665] pci_bus 0000:00: resource 7 [mem 0x7f200000-0xffffffff]
- [ 0.794667] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
- [ 0.794668] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
- [ 0.794684] NET: Registered protocol family 2
- [ 0.794714] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.794809] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.794965] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.795057] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.795058] TCP reno registered
- [ 0.795060] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.795064] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.795111] NET: Registered protocol family 1
- [ 0.795118] pci 0000:00:02.0: Boot video device
- [ 0.795171] PCI: CLS 64 bytes, default 64
- [ 0.795195] Trying to unpack rootfs image as initramfs...
- [ 0.982313] Freeing initrd memory: 12708k freed
- [ 0.984104] cpufreq-nforce2: No nForce2 chipset.
- [ 0.984230] audit: initializing netlink socket (disabled)
- [ 0.984237] type=2000 audit(1300617743.604:1): initialized
- [ 1.000133] highmem bounce pool size: 64 pages
- [ 1.000137] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 1.001136] VFS: Disk quotas dquot_6.5.2
- [ 1.001169] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 1.001538] fuse init (API version 7.16)
- [ 1.001589] msgmni has been set to 1702
- [ 1.001746] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 1.001763] io scheduler noop registered
- [ 1.001764] io scheduler deadline registered
- [ 1.001772] io scheduler cfq registered (default)
- [ 1.001958] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 1.001972] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 1.002009] intel_idle: MWAIT substates: 0x1120
- [ 1.002011] intel_idle: v0.4 model 0x2A
- [ 1.002011] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 1.002078] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 1.073645] ACPI: Power Button [PWRB]
- [ 1.073672] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 1.073674] ACPI: Power Button [PWRF]
- [ 1.073791] ACPI: acpi_idle yielding to intel_idle
- [ 1.075100] ERST: Table is not found!
- [ 1.075107] isapnp: Scanning for PnP cards...
- [ 1.429813] isapnp: No Plug & Play device found
- [ 1.429849] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 1.450246] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 1.471719] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 1.471941] Linux agpgart interface v0.103
- [ 1.471995] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
- [ 1.472037] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
- [ 1.472968] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
- [ 1.473050] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
- [ 1.473694] brd: module loaded
- [ 1.473986] loop: module loaded
- [ 1.474034] i2c-core: driver [adp5520] using legacy suspend method
- [ 1.474035] i2c-core: driver [adp5520] using legacy resume method
- [ 1.474094] ata_piix 0000:00:1f.2: version 2.13
- [ 1.474111] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.474115] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- [ 1.474146] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 1.474308] scsi0 : ata_piix
- [ 1.474364] scsi1 : ata_piix
- [ 1.475124] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0d0 irq 14
- [ 1.475129] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf0d8 irq 15
- [ 1.475143] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.475147] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
- [ 1.475168] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
- [ 1.475175] ata_piix 0000:00:1f.5: setting latency timer to 64
- [ 1.475289] scsi2 : ata_piix
- [ 1.475323] scsi3 : ata_piix
- [ 1.475968] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
- [ 1.475970] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
- [ 1.476165] Fixed MDIO Bus: probed
- [ 1.476170] Error: Driver 'mdio-gpio' is already registered, aborting...
- [ 1.476190] PPP generic driver version 2.4.2
- [ 1.476212] tun: Universal TUN/TAP device driver, 1.6
- [ 1.476213] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.476255] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.476270] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.476281] ehci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 1.476284] ehci_hcd 0000:00:1a.0: EHCI Host Controller
- [ 1.476302] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 1.501657] ehci_hcd 0000:00:1a.0: debug port 2
- [ 1.505553] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
- [ 1.505565] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe406000
- [ 1.517639] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 1.517712] hub 1-0:1.0: USB hub found
- [ 1.517715] hub 1-0:1.0: 2 ports detected
- [ 1.517755] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1.517763] ehci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 1.517766] ehci_hcd 0000:00:1d.0: EHCI Host Controller
- [ 1.517788] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 1.517821] ehci_hcd 0000:00:1d.0: debug port 2
- [ 1.521695] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
- [ 1.521706] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe405000
- [ 1.533639] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 1.533700] hub 2-0:1.0: USB hub found
- [ 1.533703] hub 2-0:1.0: 2 ports detected
- [ 1.533736] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.533742] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.533799] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
- [ 1.534147] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.534151] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.534207] mousedev: PS/2 mouse device common for all mice
- [ 1.534279] rtc_cmos 00:07: RTC can wake from S4
- [ 1.553722] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
- [ 1.553750] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 1.553794] device-mapper: uevent: version 1.0.3
- [ 1.553835] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
- [ 1.553875] device-mapper: multipath: version 1.2.0 loaded
- [ 1.553877] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 1.553914] EISA: Probing bus 0 at eisa.0
- [ 1.553915] EISA: Cannot allocate resource for mainboard
- [ 1.553916] Cannot allocate resource for EISA slot 1
- [ 1.553917] Cannot allocate resource for EISA slot 2
- [ 1.553919] Cannot allocate resource for EISA slot 3
- [ 1.553920] Cannot allocate resource for EISA slot 4
- [ 1.553921] Cannot allocate resource for EISA slot 5
- [ 1.553922] Cannot allocate resource for EISA slot 6
- [ 1.553923] Cannot allocate resource for EISA slot 7
- [ 1.553924] Cannot allocate resource for EISA slot 8
- [ 1.553925] EISA: Detected 0 cards.
- [ 1.553992] cpuidle: using governor ladder
- [ 1.554095] cpuidle: using governor menu
- [ 1.554096] EFI Variables Facility v0.08 2004-May-17
- [ 1.554241] TCP cubic registered
- [ 1.554314] NET: Registered protocol family 10
- [ 1.554608] NET: Registered protocol family 17
- [ 1.554617] Registering the dns_resolver key type
- [ 1.555277] Using IPI No-Shortcut mode
- [ 1.555318] PM: Hibernation image not present or could not be loaded.
- [ 1.555325] registered taskstats version 1
- [ 1.555527] Magic number: 3:228:730
- [ 1.555619] rtc_cmos 00:07: setting system clock to 2011-03-20 10:42:24 UTC (1300617744)
- [ 1.555621] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 1.555622] EDD information not available.
- [ 1.829698] usb 1-1: new high speed USB device number 2 using ehci_hcd
- [ 1.962424] hub 1-1:1.0: USB hub found
- [ 1.962507] hub 1-1:1.0: 6 ports detected
- [ 1.981694] Refined TSC clocksource calibration: 3292.520 MHz.
- [ 1.981699] Switching to clocksource tsc
- [ 2.073693] usb 2-1: new high speed USB device number 2 using ehci_hcd
- [ 2.206416] hub 2-1:1.0: USB hub found
- [ 2.206495] hub 2-1:1.0: 8 ports detected
- [ 2.277929] usb 1-1.5: new low speed USB device number 3 using ehci_hcd
- [ 2.501658] ata2.00: failed to resume link (SControl 0)
- [ 2.821649] ata1.01: failed to resume link (SControl 0)
- [ 2.977740] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 2.977768] ata1.01: SATA link down (SStatus 0 SControl 0)
- [ 2.985997] ata1.00: HPA detected: current 156299375, native 156301488
- [ 2.986005] ata1.00: ATA-7: SAMSUNG HM080HI, AB100-12, max UDMA/100
- [ 2.986009] ata1.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 3.002006] ata1.00: configured for UDMA/100
- [ 3.002206] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM080HI AB10 PQ: 0 ANSI: 5
- [ 3.002285] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 3.002417] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
- [ 3.002633] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.002635] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 3.002716] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.036531] sda: sda1 sda2
- [ 3.037061] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.529652] ata2.01: failed to resume link (SControl 0)
- [ 3.540830] ata2.00: SATA link down (SStatus 0 SControl 0)
- [ 3.540845] ata2.01: SATA link down (SStatus 0 SControl 0)
- [ 3.540946] Freeing unused kernel memory: 780k freed
- [ 3.541077] Write protecting the kernel text: 5244k
- [ 3.541151] Write protecting the kernel read-only data: 2184k
- [ 3.553404] udev[73]: starting version 167
- [ 3.567557] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 3.567574] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 3.567614] r8169 0000:02:00.0: setting latency timer to 64
- [ 3.567620] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
- [ 3.567692] r8169 0000:02:00.0: irq 40 for MSI/MSI-X
- [ 3.567975] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf8020000, 6c:62:6d:ca:c5:7a, XID 0c200000 IRQ 40
- [ 3.584721] usbcore: registered new interface driver usbhid
- [ 3.584723] usbhid: USB HID core driver
- [ 3.601822] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input2
- [ 3.601873] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input0
- [ 3.606631] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
- [ 3.606942] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input3
- [ 3.607027] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input1
- [ 3.785171] EXT3-fs: barriers not enabled
- [ 3.794447] kjournald starting. Commit interval 5 seconds
- [ 3.794484] EXT3-fs (sda1): mounted filesystem with ordered data mode
- [ 14.673781] udev[270]: starting version 167
- [ 14.698167] Adding 4882428k swap on /dev/sda2. Priority:-1 extents:1 across:4882428k
- [ 14.906241] parport_pc 00:0b: reported by Plug and Play ACPI
- [ 14.906351] parport0: PC-style at 0x378, irq 5 [PCSPP]
- [ 14.925644] ppdev: user-space parallel port driver
- [ 14.968618] type=1400 audit(1300617757.907:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=416 comm="apparmor_parser"
- [ 14.968652] type=1400 audit(1300617757.907:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=416 comm="apparmor_parser"
- [ 14.968682] type=1400 audit(1300617757.907:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=416 comm="apparmor_parser"
- [ 14.968763] type=1400 audit(1300617757.907:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=402 comm="apparmor_parser"
- [ 14.968798] type=1400 audit(1300617757.907:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=402 comm="apparmor_parser"
- [ 14.968828] type=1400 audit(1300617757.907:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=402 comm="apparmor_parser"
- [ 14.970382] IPv4 FIB: Using LC-trie version 0.409
- [ 15.038215] r8169 0000:02:00.0: eth0: link down
- [ 15.038224] r8169 0000:02:00.0: eth0: link down
- [ 15.038314] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 15.171107] [drm] Initialized drm 1.1.0 20060810
- [ 15.254470] lp0: using parport0 (interrupt-driven).
- [ 15.442396] [drm:drm_pci_init],
- [ 15.442423] [drm:drm_get_pci_dev],
- [ 15.442432] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 15.442435] i915 0000:00:02.0: setting latency timer to 64
- [ 15.442443] [drm:drm_get_minor],
- [ 15.442505] [drm:drm_get_minor], new minor assigned 64
- [ 15.442514] [drm:drm_get_minor],
- [ 15.442568] [drm:drm_get_minor], new minor assigned 0
- [ 15.451875] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
- [ 15.451877] [drm] MTRR allocation failed. Graphics performance may suffer.
- [ 15.451967] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7660b018
- [ 15.451973] [drm:intel_opregion_setup], Public ACPI methods supported
- [ 15.451974] [drm:intel_opregion_setup], SWSCI supported
- [ 15.451976] [drm:intel_opregion_setup], ASLE supported
- [ 15.451991] i915 0000:00:02.0: irq 41 for MSI/MSI-X
- [ 15.451994] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 15.451995] [drm] Driver supports precise vblank timestamp query.
- [ 15.451998] [drm:intel_detect_pch], Found CougarPoint PCH
- [ 15.475463] [drm:init_status_page], render ring hws offset: 0x00000000
- [ 15.475676] [drm:init_status_page], gen6 bsd ring hws offset: 0x00021000
- [ 15.475797] [drm:init_status_page], blt ring hws offset: 0x00042000
- [ 15.475916] [drm:init_vbt_defaults], Set default to SSC at 100MHz
- [ 15.475918] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-D d
- [ 15.475920] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
- [ 15.475922] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
- [ 15.475924] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
- [ 15.475931] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
- [ 15.475932] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
- [ 15.475935] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
- [ 15.475940] [drm:intel_dsm_pci_probe], no _DSM method for intel device
- [ 15.475946] [drm:intel_modeset_init], 2 display pipes available.
- [ 15.475952] [drm:drm_sysfs_connector_add], adding "VGA-1" to sysfs
- [ 15.475966] [drm:drm_sysfs_hotplug_event], generating hotplug event
- [ 15.475981] [drm:intel_crt_init], pch crt adpa set to 0xf40000
- [ 15.478480] [drm:intel_sdvo_read_byte], i2c transfer returned -6
- [ 15.478482] [drm:intel_sdvo_init], No SDVO device found on SDVOB
- [ 15.478504] [drm:drm_sysfs_connector_add], adding "HDMI-A-1" to sysfs
- [ 15.478514] [drm:drm_sysfs_hotplug_event], generating hotplug event
- [ 15.478520] [drm:drm_sysfs_connector_add], adding "DP-1" to sysfs
- [ 15.478530] [drm:drm_sysfs_hotplug_event], generating hotplug event
- [ 15.478535] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
- [ 15.479042] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
- [ 15.479043] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
- [ 15.479551] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
- [ 15.479553] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
- [ 15.479574] [drm:drm_sysfs_connector_add], adding "HDMI-A-2" to sysfs
- [ 15.479582] [drm:drm_sysfs_hotplug_event], generating hotplug event
- [ 15.479589] [drm:drm_sysfs_connector_add], adding "DP-2" to sysfs
- [ 15.479598] [drm:drm_sysfs_hotplug_event], generating hotplug event
- [ 15.479602] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
- [ 15.480110] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
- [ 15.480111] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
- [ 15.480619] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
- [ 15.480620] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
- [ 15.480640] [drm:intel_panel_get_backlight], get backlight PWM = 0
- [ 15.480645] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 15.486284] [drm:drm_irq_install], irq=41
- [ 15.486329] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off
- [ 15.486332] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
- [ 15.545286] [drm:intel_wait_for_vblank], vblank wait timed out
- [ 15.573720] [drm:intel_update_fbc],
- [ 15.574035] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off
- [ 15.574037] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
- [ 15.574039] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
- [ 15.574040] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
- [ 15.633330] [drm:intel_wait_for_vblank], vblank wait timed out
- [ 15.633976] [drm:intel_update_fbc],
- [ 15.634291] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
- [ 15.634294] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
- [ 15.649333] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
- [ 15.649340] [drm:intel_crt_detect], CRT not detected via hotplug
- [ 15.649344] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
- [ 15.649349] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
- [ 15.661503] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
- [ 15.661505] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
- [ 15.662013] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
- [ 15.662015] [drm:ironlake_dp_detect], DPCD: 0000
- [ 15.662016] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
- [ 15.662018] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2]
- [ 15.949281] [drm:drm_detect_monitor_audio], Monitor has basic audio support
- [ 16.237281] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] probed modes :
- [ 16.237283] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
- [ 16.237286] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
- [ 16.237289] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
- [ 16.237292] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
- [ 16.237294] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
- [ 16.237803] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
- [ 16.237804] [drm:ironlake_dp_detect], DPCD: 0000
- [ 16.237806] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
- [ 16.237807] [drm:drm_setup_crtcs],
- [ 16.237809] [drm:drm_enable_connectors], connector 5 enabled? no
- [ 16.237810] [drm:drm_enable_connectors], connector 8 enabled? no
- [ 16.237812] [drm:drm_enable_connectors], connector 11 enabled? no
- [ 16.237813] [drm:drm_enable_connectors], connector 15 enabled? yes
- [ 16.237814] [drm:drm_enable_connectors], connector 17 enabled? no
- [ 16.237816] [drm:drm_target_preferred], looking for cmdline mode on connector 15
- [ 16.237817] [drm:drm_target_preferred], looking for preferred mode on connector 15
- [ 16.237819] [drm:drm_target_preferred], found mode 1920x1080
- [ 16.237820] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
- [ 16.237822] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
- [ 16.243996] [drm:intelfb_create], allocated 1920x1080 fb: 0x00063000, bo f1214e00
- [ 16.244083] [drm:drm_crtc_helper_set_config],
- [ 16.244085] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
- [ 16.244088] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
- [ 16.244089] [drm:drm_crtc_helper_set_config], modes are different, full mode set
- [ 16.244091] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
- [ 16.244093] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
- [ 16.244095] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
- [ 16.244097] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
- [ 16.244098] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-2] to [CRTC:3]
- [ 16.244100] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
- [ 16.244101] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
- [ 16.244104] [drm:drm_crtc_helper_set_mode], [CRTC:3]
- [ 16.244128] [drm:drm_vblank_get], enabling vblank on crtc 0, ret: -22
- [ 16.244353] [drm:intel_crtc_mode_set], Mode for pipe A:
- [ 16.244354] [drm:drm_mode_debug_printmodeline], Modeline 25:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
- [ 16.297314] [drm:intel_wait_for_vblank], vblank wait timed out
- [ 16.297320] [drm:intel_pipe_set_base_atomic], Writing base 00063000 00000000 0 0 7680
- [ 16.297325] [drm:intel_update_fbc],
- [ 16.297328] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
- [ 16.297333] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TMDS-14] set [MODE:25:1920x1080]
- [ 16.297340] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 9, cursor: 6
- [ 16.353312] [drm:intel_wait_for_vblank], vblank wait timed out
- [ 16.409313] [drm:intel_wait_for_vblank], vblank wait timed out
- [ 16.410119] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700
- [ 16.410121] [drm:gen6_fdi_link_train], FDI train 1 done.
- [ 16.410771] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
- [ 16.410773] [drm:gen6_fdi_link_train], FDI train 2 done.
- [ 16.410774] [drm:gen6_fdi_link_train], FDI train done.
- [ 16.412008] [drm:intel_update_fbc],
- [ 16.412016] [drm:drm_calc_timestamping_constants], crtc 3: hwmode: htotal 2200, vtotal 1125, vdisplay 1080
- [ 16.412018] [drm:drm_calc_timestamping_constants], crtc 3: clock 148500 kHz framedur 16665750 linedur 14814, pixeldur 6
- [ 16.412021] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
- [ 16.412022] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-2] set DPMS on
- [ 16.412037] [drm:drm_crtc_helper_set_config],
- [ 16.412038] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
- [ 16.412040] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-2] to [CRTC:3]
- [ 16.412097] Console: switching to colour frame buffer device 240x67
- [ 16.412103] [drm:drm_crtc_helper_set_config],
- [ 16.412104] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
- [ 16.412107] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-2] to [CRTC:3]
- [ 16.416807] fb0: inteldrmfb frame buffer device
- [ 16.416808] drm: registered panic notifier
- [ 16.416815] No ACPI video bus found
- [ 16.416908] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 16.416947] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 16.417012] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
- [ 16.417037] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 16.428666] [drm:intel_prepare_page_flip], preparing flip with no unpin work?
- [ 16.429003] [drm:drm_stub_open],
- [ 16.429006] [drm:drm_open_helper], pid = 225, minor = 0
- [ 16.429008] [drm:i915_driver_open],
- [ 16.429010] [drm:drm_setup],
- [ 16.429013] [drm:drm_ioctl], pid=225, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1
- [ 16.429016] [drm:drm_ioctl], pid=225, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1
- [ 16.429019] [drm:drm_release], open_count = 1
- [ 16.429021] [drm:drm_release], pid = 225, device = 0xe200, open_count = 1
- [ 16.429024] [drm:drm_lastclose],
- [ 16.429025] [drm:drm_crtc_helper_set_config],
- [ 16.429026] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
- [ 16.429031] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-2] to [CRTC:3]
- [ 16.429033] [drm:drm_crtc_helper_set_config],
- [ 16.429034] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
- [ 16.429036] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-2] to [CRTC:3]
- [ 16.429038] [drm:drm_lastclose], driver lastclose completed
- [ 16.429039] [drm:drm_lastclose], lastclose completed
- [ 16.429047] [drm:drm_stub_open],
- [ 16.429048] [drm:drm_open_helper], pid = 225, minor = 0
- [ 16.429050] [drm:i915_driver_open],
- [ 16.429051] [drm:drm_setup],
- [ 16.429052] [drm:drm_ioctl], pid=225, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1
- [ 16.429055] [drm:drm_ioctl], pid=225, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1
- [ 16.429057] [drm:drm_release], open_count = 1
- [ 16.429059] [drm:drm_release], pid = 225, device = 0xe200, open_count = 1
- [ 16.429061] [drm:drm_lastclose],
- [ 16.429062] [drm:drm_crtc_helper_set_config],
- [ 16.429063] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
- [ 16.429065] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-2] to [CRTC:3]
- [ 16.429067] [drm:drm_crtc_helper_set_config],
- [ 16.429068] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
- [ 16.429070] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-2] to [CRTC:3]
- [ 16.429072] [drm:drm_lastclose], driver lastclose completed
- [ 16.429073] [drm:drm_lastclose], lastclose completed
- [ 16.429078] [drm:drm_stub_open],
- [ 16.429079] [drm:drm_open_helper], pid = 225, minor = 0
- [ 16.429081] [drm:i915_driver_open],
- [ 16.429082] [drm:drm_setup],
- [ 16.429084] [drm:drm_ioctl], pid=225, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1
- [ 16.429086] [drm:drm_ioctl], pid=225, cmd=0xc0246400, nr=0x00, dev 0xe200, auth=1
- [ 16.429089] [drm:drm_ioctl], pid=225, cmd=0xc0086401, nr=0x01, dev 0xe200, auth=1
- [ 16.429091] [drm:drm_ioctl], pid=225, cmd=0xc0086401, nr=0x01, dev 0xe200, auth=1
- [ 16.429099] [drm:drm_ioctl], pid=225, cmd=0x80106463, nr=0x63, dev 0xe200, auth=1
- [ 16.429102] [drm:drm_ioctl], pid=225, cmd=0xc0086446, nr=0x46, dev 0xe200, auth=1
- [ 16.429104] [drm:drm_ioctl], pid=225, cmd=0xc0086446, nr=0x46, dev 0xe200, auth=1
- [ 16.429106] [drm:drm_ioctl], pid=225, cmd=0xc0086446, nr=0x46, dev 0xe200, auth=1
- [ 16.429108] [drm:drm_ioctl], pid=225, cmd=0xc0086446, nr=0x46, dev 0xe200, auth=1
- [ 16.429110] [drm:drm_ioctl], pid=225, cmd=0xc0086446, nr=0x46, dev 0xe200, auth=1
- [ 16.429141] [drm:drm_ioctl], pid=225, cmd=0xc04064a0, nr=0xa0, dev 0xe200, auth=1
- [ 16.429144] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
- [ 16.429146] [drm:drm_ioctl], pid=225, cmd=0xc04064a0, nr=0xa0, dev 0xe200, auth=1
- [ 16.429148] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
- [ 16.429151] [drm:drm_ioctl], pid=225, cmd=0xc04c64a7, nr=0xa7, dev 0xe200, auth=1
- [ 16.429153] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
- [ 16.429155] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
- [ 16.429158] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
- [ 16.429160] [drm:intel_crt_detect], CRT not detected via hotplug
- [ 16.429162] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
- [ 16.429164] [drm:drm_ioctl], pid=225, cmd=0xc04c64a7, nr=0xa7, dev 0xe200, auth=1
- [ 16.429166] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
- [ 16.429167] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
- [ 16.429170] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
- [ 16.429172] [drm:intel_crt_detect], CRT not detected via hotplug
- [ 16.429173] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
- [ 16.429176] [drm:drm_ioctl], pid=225, cmd=0xc04c64a7, nr=0xa7, dev 0xe200, auth=1
- [ 16.429178] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
- [ 16.429179] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
- [ 16.441371] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
- [ 16.441373] [drm:drm_ioctl], pid=225, cmd=0xc04c64a7, nr=0xa7, dev 0xe200, auth=1
- [ 16.441375] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
- [ 16.441376] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
- [ 16.453693] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
- [ 16.453696] [drm:drm_ioctl], pid=225, cmd=0xc04c64a7, nr=0xa7, dev 0xe200, auth=1
- [ 16.453698] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
- [ 16.453700] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
- [ 16.454209] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
- [ 16.454211] [drm:ironlake_dp_detect], DPCD: 0000
- [ 16.454212] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
- [ 16.454214] [drm:drm_ioctl], pid=225, cmd=0xc04c64a7, nr=0xa7, dev 0xe200, auth=1
- [ 16.454216] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
- [ 16.454220] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1]
- [ 16.454728] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
- [ 16.454729] [drm:ironlake_dp_detect], DPCD: 0000
- [ 16.454731] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:DP-1] disconnected
- [ 16.454733] [drm:drm_ioctl], pid=225, cmd=0xc04c64a7, nr=0xa7, dev 0xe200, auth=1
- [ 16.454735] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
- [ 16.454736] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2]
- [ 16.741264] [drm:drm_detect_monitor_audio], Monitor has basic audio support
- [ 17.033324] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] probed modes :
- [ 17.033331] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
- [ 17.033338] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
- [ 17.033344] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
- [ 17.033350] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
- [ 17.033369] [drm:drm_ioctl], pid=225, cmd=0xc04c64a7, nr=0xa7, dev 0xe200, auth=1
- [ 17.033374] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
- [ 17.033383] [drm:drm_ioctl], pid=225, cmd=0xc01464a6, nr=0xa6, dev 0xe200, auth=1
- [ 17.033388] [drm:drm_ioctl], pid=225, cmd=0xc06864a1, nr=0xa1, dev 0xe200, auth=1
- [ 17.040812] [drm:drm_ioctl], pid=225, cmd=0xc04c64a7, nr=0xa7, dev 0xe200, auth=1
- [ 17.040816] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
- [ 17.040819] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
- [ 17.041329] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
- [ 17.041331] [drm:ironlake_dp_detect], DPCD: 0000
- [ 17.041333] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
- [ 17.041336] [drm:drm_ioctl], pid=225, cmd=0xc04c64a7, nr=0xa7, dev 0xe200, auth=1
- [ 17.041338] [drm:drm_mode_getconnector], [CONNECTOR:17:?]
- [ 17.041339] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2]
- [ 17.041847] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
- [ 17.041849] [drm:ironlake_dp_detect], DPCD: 0000
- [ 17.041850] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-2] disconnected
- [ 17.042070] [drm:drm_crtc_helper_set_config],
- [ 17.042071] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
- [ 17.042077] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-2] to [CRTC:3]
- [ 17.048032] [drm:drm_ioctl], pid=225, cmd=0x641e, nr=0x1e, dev 0xe200, auth=1
- [ 17.087243] hda_codec: ALC892: BIOS auto-probing.
- [ 17.122282] HDMI: detected monitor at connection type HDMI
- [ 17.122284] HDMI: available speakers: FL/FR
- [ 17.122286] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16
- [ 17.125665] HDMI hot plug event: Pin=6 Presence_Detect=1 ELD_Valid=1
- [ 17.125753] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
- [ 17.129450] HDMI: detected monitor at connection type HDMI
- [ 17.129452] HDMI: available speakers: FL/FR
- [ 17.129454] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16
- [ 17.129455] HDMI hot plug event: Pin=6 Presence_Detect=1 ELD_Valid=1
- [ 17.133061] HDMI: detected monitor at connection type HDMI
- [ 17.133062] HDMI: available speakers: FL/FR
- [ 17.133064] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16
- [ 18.357200] r8169 0000:02:00.0: eth0: link up
- [ 18.357344] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 21.139413] EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
- [ 21.139616] EXT3-fs (sda1): using internal journal
- [ 21.412399] type=1400 audit(1300617764.351:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=628 comm="apparmor_parser"
- [ 21.478294] type=1400 audit(1300617764.419:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=627 comm="apparmor_parser"
- [ 21.478327] type=1400 audit(1300617764.419:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=627 comm="apparmor_parser"
- [ 21.478356] type=1400 audit(1300617764.419:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=627 comm="apparmor_parser"
- [ 21.632630] lirc_dev: IR Remote Control driver registered, major 250
- [ 21.637683] usbcore: registered new interface driver mceusb
- [ 21.677045] IR NEC protocol handler initialized
- [ 21.687841] IR RC5(x) protocol handler initialized
- [ 21.689299] IR RC6 protocol handler initialized
- [ 21.690818] IR JVC protocol handler initialized
- [ 21.692111] IR Sony protocol handler initialized
- [ 21.693855] IR LIRC bridge handler initialized
- [ 21.750502] [drm:drm_ioctl], pid=225, cmd=0x641f, nr=0x1f, dev 0xe200, auth=1
- [ 21.751889] [drm:drm_release], open_count = 1
- [ 21.751891] [drm:drm_release], pid = 225, device = 0xe200, open_count = 1
- [ 21.751895] [drm:drm_lastclose],
- [ 21.751897] [drm:drm_crtc_helper_set_config],
- [ 21.751898] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
- [ 21.751903] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-2] to [CRTC:3]
- [ 21.751905] [drm:drm_crtc_helper_set_config],
- [ 21.751906] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
- [ 21.751908] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-2] to [CRTC:3]
- [ 21.751910] [drm:drm_lastclose], driver lastclose completed
- [ 21.751911] [drm:drm_lastclose], lastclose completed
- [ 21.752192] [drm:drm_crtc_helper_set_config],
- [ 21.752193] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
- [ 21.752197] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:HDMI-A-2] to [CRTC:3]
- [ 26.421000] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
- [ 26.421003] [drm:intel_crt_detect], CRT not detected via hotplug
- [ 26.421005] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
- [ 26.433157] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
- [ 26.433666] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
- [ 26.433668] [drm:ironlake_dp_detect], DPCD: 0000
- [ 26.433669] [drm:output_poll_execute], [CONNECTOR:11:DP-1] status updated from 2 to 2
- [ 26.733054] [drm:drm_detect_monitor_audio], Monitor has basic audio support
- [ 26.733061] [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-2] status updated from 1 to 1
- [ 26.733574] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
- [ 26.733576] [drm:ironlake_dp_detect], DPCD: 0000
- [ 26.733577] [drm:output_poll_execute], [CONNECTOR:17:DP-2] status updated from 2 to 2
- [ 28.884969] eth0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement