Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Last login: Wed Aug 18 18:36:35 on ttys000
- danny-mb:~ dannypampel$ ssh xbmc@10.0.0.9
- xbmc@10.0.0.9's password:
- Linux AppleTV 2.6.24-28-generic #1 SMP Thu May 27 00:16:49 UTC 2010 i686
- The programs included with the Ubuntu system are free software;
- the exact distribution terms for each program are described in the
- individual files in /usr/share/doc/*/copyright.
- Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
- applicable law.
- To access official Ubuntu documentation, please visit:
- http://help.ubuntu.com/
- Last login: Wed Aug 18 22:27:49 2010 from 10.0.0.2
- xbmc@AppleTV:~$ dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.24-28-generic (buildd@rothera) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Thu May 27 00:16:49 UTC 2010 (Ubuntu 2.6.24-28.70-generic)
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
- [ 0.000000] BIOS-e820: 000000000008f000 - 0000000000090000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 0000000000090000 - 00000000000a0000 (usable)
- [ 0.000000] BIOS-e820: 00000000000a0000 - 00000000000c0000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000025ae000 (usable)
- [ 0.000000] BIOS-e820: 00000000028eb000 - 000000000293c000 (reserved)
- [ 0.000000] BIOS-e820: 000000000293c000 - 000000000f171000 (usable)
- [ 0.000000] BIOS-e820: 000000000f171000 - 000000000f372000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000000f372000 - 000000000febd000 (usable)
- [ 0.000000] BIOS-e820: 000000000febd000 - 000000000febf000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000000febf000 - 000000000fec0000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000000fec0000 - 000000000feef000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000000feef000 - 000000000fef1000 (usable)
- [ 0.000000] BIOS-e820: 000000000fef1000 - 000000000feff000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000000feff000 - 000000000ff00000 (usable)
- [ 0.000000] BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000f00f8000 - 00000000f00f9000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fffa0000 - 00000000fffd0000 (reserved)
- [ 0.000000] 0MB HIGHMEM available.
- [ 0.000000] 255MB LOWMEM available.
- [ 0.000000] Entering add_active_range(0, 0, 65280) 0 entries of 256 used
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0 -> 4096
- [ 0.000000] Normal 4096 -> 65280
- [ 0.000000] HighMem 65280 -> 65280
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[1] active PFN ranges
- [ 0.000000] 0: 0 -> 65280
- [ 0.000000] On node 0 totalpages: 65280
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
- [ 0.000000] Normal zone: 478 pages used for memmap
- [ 0.000000] Normal zone: 60706 pages, LIFO batch:15
- [ 0.000000] HighMem zone: 0 pages used for memmap
- [ 0.000000] Movable zone: 0 pages used for memmap
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] ACPI: RSDP signature @ 0xC00F8000 checksum 0
- [ 0.000000] ACPI: RSDP 000F8000, 0024 (r2 APPLE )
- [ 0.000000] ACPI: XSDT 0FEFD1C0, 0064 (r1 APPLE Apple00 DA 1000013)
- [ 0.000000] ACPI: FACP 0FEFB000, 00F4 (r3 APPLE Apple00 DA Loki 5F)
- [ 0.000000] ACPI: DSDT 0FEF4000, 2BE5 (r1 APPLE AppleTV 10001 INTL 20050309)
- [ 0.000000] ACPI: FACS 0FEC0000, 0040
- [ 0.000000] ACPI: HPET 0FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
- [ 0.000000] ACPI: APIC 0FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
- [ 0.000000] ACPI: MCFG 0FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
- [ 0.000000] ACPI: ASF! 0FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
- [ 0.000000] ACPI: SSDT 0FEF2000, 01A6 (r1 APPLE Cpu0Ist 3000 INTL 20050309)
- [ 0.000000] ACPI: SSDT 0FEF3000, 0158 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
- [ 0.000000] ACPI: SSDT 0FEF1000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
- [ 0.000000] ACPI: DMI BIOS year==0, assuming ACPI-capable machine
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] Processor #0 6:13 APIC version 20
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:e00f8000)
- [ 0.000000] swsusp: Registered nosave memory region: 000000000008f000 - 0000000000090000
- [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000c0000
- [ 0.000000] swsusp: Registered nosave memory region: 00000000000c0000 - 0000000000100000
- [ 0.000000] swsusp: Registered nosave memory region: 00000000025ae000 - 00000000028eb000
- [ 0.000000] swsusp: Registered nosave memory region: 00000000028eb000 - 000000000293c000
- [ 0.000000] swsusp: Registered nosave memory region: 000000000f171000 - 000000000f372000
- [ 0.000000] swsusp: Registered nosave memory region: 000000000febd000 - 000000000febf000
- [ 0.000000] swsusp: Registered nosave memory region: 000000000febf000 - 000000000fec0000
- [ 0.000000] swsusp: Registered nosave memory region: 000000000fec0000 - 000000000feef000
- [ 0.000000] swsusp: Registered nosave memory region: 000000000fef1000 - 000000000feff000
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64770
- [ 0.000000] Kernel command line: root=/dev/sdb3 ro vesa video=vesafb xbmc=autostart,nodiskmount,setvolume loglevel=0
- [ 0.000000] mapped APIC to ffffb000 (fee00000)
- [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
- [ 0.000000] Detected 1000.049 MHz processor.
- [ 31.108038] Console: colour dummy device 80x25
- [ 31.108044] console [tty0] enabled
- [ 31.108187] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 31.108337] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 31.118177] Memory: 240892k/261120k available (2182k kernel code, 13564k reserved, 1005k data, 368k init, 0k highmem)
- [ 31.118190] virtual kernel memory layout:
- [ 31.118192] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
- [ 31.118194] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 31.118197] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
- [ 31.118199] lowmem : 0xc0000000 - 0xcff00000 ( 255 MB)
- [ 31.118201] .init : 0xc0423000 - 0xc047f000 ( 368 kB)
- [ 31.118203] .data : 0xc03218ba - 0xc041cdc4 (1005 kB)
- [ 31.118205] .text : 0xc0100000 - 0xc03218ba (2182 kB)
- [ 31.118211] Checking if this processor honours the WP bit even in supervisor mode... Ok.
- [ 31.118266] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
- [ 31.118509] hpet clockevent registered
- [ 31.118518] Calibrating delay loop (skipped), using tsc calculated value.. 2000.09 BogoMIPS (lpj=4000196)
- [ 31.118550] Security Framework initialized
- [ 31.118562] SELinux: Disabled at boot.
- [ 31.118586] AppArmor: AppArmor initialized
- [ 31.118593] Failure registering capabilities with primary security module.
- [ 31.118606] Mount-cache hash table entries: 512
- [ 31.118809] Initializing cgroup subsys ns
- [ 31.118819] Initializing cgroup subsys cpuacct
- [ 31.118836] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
- [ 31.118855] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 31.118859] CPU: L2 cache: 2048K
- [ 31.118865] CPU: After all inits, caps: afe9fbff 00100000 00000000 00042040 00000180 00000000 00000000 00000000
- [ 31.118885] Compat vDSO mapped to ffffe000.
- [ 31.118904] Checking 'hlt' instruction... OK.
- [ 31.135080] SMP alternatives: switching to UP code
- [ 31.138018] Freeing SMP alternatives: 11k freed
- [ 31.138197] Early unpacking initramfs... done
- [ 31.694105] ACPI: Core revision 20070126
- [ 31.694178] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
- [ 31.696725] CPU0: Intel Genuine Intel(R) processor 1.00GHz stepping 08
- [ 31.696755] Total of 1 processors activated (2000.09 BogoMIPS).
- [ 31.696968] ENABLING IO-APIC IRQs
- [ 31.697184] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 31.841894] Brought up 1 CPUs
- [ 31.841927] CPU0 attaching sched-domain:
- [ 31.841931] domain 0: span 01
- [ 31.841934] groups: 01
- [ 31.842173] net_namespace: 64 bytes
- [ 31.842186] Booting paravirtualized kernel on bare hardware
- [ 31.842928] Time: 2:30:01 Date: 08/19/10
- [ 31.842963] NET: Registered protocol family 16
- [ 31.843264] EISA bus registered
- [ 31.843272] ACPI: bus type pci registered
- [ 31.843637] PCI: Using configuration type 1
- [ 31.843655] Setting up standard PCI resources
- [ 31.845053] ACPI: EC: Look up EC in DSDT
- [ 31.846676] ACPI: BIOS _OSI(Linux) query ignored
- [ 31.846680] ACPI: DMI System Vendor: Apple Inc.
- [ 31.846683] ACPI: DMI Product Name: AppleTV1,1
- [ 31.846686] ACPI: DMI Product Version: 1.0
- [ 31.846689] ACPI: DMI Board Name: Mac-F4228DC8
- [ 31.846691] ACPI: DMI BIOS Vendor: Apple Computer, Inc.
- [ 31.846694] ACPI: DMI BIOS Date: 12/22/09
- [ 31.846697] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
- [ 31.846701] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
- [ 31.846996] ACPI: Interpreter enabled
- [ 31.847000] ACPI: (supports S0 S4)
- [ 31.847016] ACPI: Using IOAPIC for interrupt routing
- [ 31.851025] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 31.851687] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
- [ 31.851694] PCI quirk: region 0500-053f claimed by ICH6 GPIO
- [ 31.852456] PCI: Transparent bridge - 0000:00:1e.0
- [ 31.852500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 31.853021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
- [ 31.853215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
- [ 31.857181] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 31.857311] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 31.857442] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 31.857567] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 31.857692] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 31.857861] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 31.857989] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 31.858114] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 31.858376] Linux Plug and Play Support v0.97 (c) Adam Belay
- [ 31.858422] pnp: PnP ACPI init
- [ 31.858433] ACPI: bus type pnp registered
- [ 31.860148] pnp: PnP ACPI: found 8 devices
- [ 31.860151] ACPI: ACPI bus type pnp unregistered
- [ 31.860157] PnPBIOS: Disabled by ACPI PNP
- [ 31.860489] PCI: Using ACPI for IRQ routing
- [ 31.860494] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
- [ 31.869844] NET: Registered protocol family 8
- [ 31.869848] NET: Registered protocol family 20
- [ 31.869899] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 31.869906] hpet0: 3 64-bit timers, 14318180 Hz
- [ 31.870956] AppArmor: AppArmor Filesystem Enabled
- [ 31.873804] Time: tsc clocksource has been installed.
- [ 31.873824] Switched to high resolution mode on CPU 0
- [ 31.881816] system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
- [ 31.881821] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
- [ 31.881827] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
- [ 31.881832] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
- [ 31.881837] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
- [ 31.881842] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
- [ 31.881854] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
- [ 31.881863] system 00:06: ioport range 0x680-0x6ef has been reserved
- [ 31.881868] system 00:06: ioport range 0x800-0x80f has been reserved
- [ 31.881873] system 00:06: ioport range 0x810-0x817 has been reserved
- [ 31.881877] system 00:06: ioport range 0x400-0x47f has been reserved
- [ 31.881882] system 00:06: ioport range 0x500-0x53f has been reserved
- [ 31.881887] system 00:06: ioport range 0x1640-0x164f has been reserved
- [ 31.912500] PCI: Failed to allocate mem resource #6:20000@20000000 for 0000:01:00.0
- [ 31.912504] PCI: Bridge: 0000:00:01.0
- [ 31.912507] IO window: disabled.
- [ 31.912512] MEM window: 20000000-21ffffff
- [ 31.912517] PREFETCH window: 10000000-1fffffff
- [ 31.912522] PCI: Bridge: 0000:00:1c.0
- [ 31.912525] IO window: disabled.
- [ 31.912532] MEM window: 22000000-224fffff
- [ 31.912538] PREFETCH window: disabled.
- [ 31.912546] PCI: Bridge: 0000:00:1e.0
- [ 31.912550] IO window: 1000-1fff
- [ 31.912558] MEM window: 22500000-225fffff
- [ 31.912563] PREFETCH window: disabled.
- [ 31.912584] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
- [ 31.912592] PCI: Setting latency timer of device 0000:00:01.0 to 64
- [ 31.912622] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
- [ 31.912631] PCI: Setting latency timer of device 0000:00:1c.0 to 64
- [ 31.912648] PCI: Setting latency timer of device 0000:00:1e.0 to 64
- [ 31.912663] NET: Registered protocol family 2
- [ 31.949786] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 31.950093] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 31.950174] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 31.950252] TCP: Hash tables configured (established 8192 bind 8192)
- [ 31.950257] TCP reno registered
- [ 31.961856] checking if image is initramfs... it is
- [ 33.056027] Freeing initrd memory: 7166k freed
- [ 33.056948] audit: initializing netlink socket (disabled)
- [ 33.056970] audit(1282185001.832:1): initialized
- [ 33.060223] VFS: Disk quotas dquot_6.5.1
- [ 33.060350] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 33.060561] io scheduler noop registered
- [ 33.060566] io scheduler anticipatory registered
- [ 33.060569] io scheduler deadline registered
- [ 33.060587] io scheduler cfq registered (default)
- [ 33.060818] PCI: Setting latency timer of device 0000:00:01.0 to 64
- [ 33.060863] assign_interrupt_mode Found MSI capability
- [ 33.060903] Allocate Port Service[0000:00:01.0:pcie00]
- [ 33.061017] PCI: Setting latency timer of device 0000:00:1c.0 to 64
- [ 33.061083] assign_interrupt_mode Found MSI capability
- [ 33.061137] Allocate Port Service[0000:00:1c.0:pcie00]
- [ 33.061192] Allocate Port Service[0000:00:1c.0:pcie02]
- [ 33.061552] isapnp: Scanning for PnP cards...
- [ 33.415347] isapnp: No Plug & Play device found
- [ 33.458653] Real Time Clock Driver v1.12ac
- [ 33.458973] hpet_resources: 0xfed00000 is busy
- [ 33.459002] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
- [ 33.460812] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
- [ 33.460922] input: Macintosh mouse button emulation as /devices/virtual/input/input0
- [ 33.461128] PNP: No PS/2 controller found. Probing ports directly.
- [ 33.461995] i8042.c: No controller found.
- [ 33.468462] mice: PS/2 mouse device common for all mice
- [ 33.468622] EISA: Probing bus 0 at eisa.0
- [ 33.468632] Cannot allocate resource for EISA slot 1
- [ 33.468636] Cannot allocate resource for EISA slot 2
- [ 33.468666] EISA: Detected 0 cards.
- [ 33.468672] cpuidle: using governor ladder
- [ 33.468675] cpuidle: using governor menu
- [ 33.468812] NET: Registered protocol family 1
- [ 33.468855] Using IPI No-Shortcut mode
- [ 33.468905] registered taskstats version 1
- [ 33.469029] Magic number: 6:127:511
- [ 33.469135] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 33.469138] EDD information not available.
- [ 33.469416] Freeing unused kernel memory: 368k freed
- [ 33.469459] Write protecting the kernel read-only data: 803k
- [ 33.579339] vesafb: framebuffer at 0x10028000, mapped to 0xd0880000, using 7200k, total 16384k
- [ 33.579347] vesafb: mode is 1280x720x32, linelength=5120, pages=4096
- [ 33.579350] vesafb: scrolling: redraw
- [ 33.579354] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 33.579533] Console: switching to colour frame buffer device 160x45
- [ 33.663135] fb0: VESA VGA frame buffer device
- [ 33.889778] fuse init (API version 7.9)
- [ 33.912522] ACPI: processor limited to max C-state 2
- [ 33.912794] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
- [ 33.912803] ACPI: Processor [CPU0] (supports 8 throttling states)
- [ 33.912823] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
- [ 34.711092] usbcore: registered new interface driver usbfs
- [ 34.711128] usbcore: registered new interface driver hub
- [ 34.727032] usbcore: registered new device driver usb
- [ 34.739007] USB Universal Host Controller Interface driver v3.0
- [ 34.739096] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18
- [ 34.739112] PCI: Setting latency timer of device 0000:00:1d.0 to 64
- [ 34.739119] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 34.739530] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
- [ 34.739571] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00002020
- [ 34.739775] usb usb1: configuration #1 chosen from 1 choice
- [ 34.739816] hub 1-0:1.0: USB hub found
- [ 34.739824] hub 1-0:1.0: 2 ports detected
- [ 34.797784] 8139too Fast Ethernet driver 0.9.28
- [ 34.843055] PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
- [ 34.843066] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 18
- [ 34.843087] PCI: Setting latency timer of device 0000:00:1d.7 to 64
- [ 34.843093] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 34.843138] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 34.847065] ehci_hcd 0000:00:1d.7: debug port 1
- [ 34.847074] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
- [ 34.847085] ehci_hcd 0000:00:1d.7: irq 18, io mem 0x22605000
- [ 34.852055] SCSI subsystem initialized
- [ 34.865021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- [ 34.865205] usb usb2: configuration #1 chosen from 1 choice
- [ 34.865245] hub 2-0:1.0: USB hub found
- [ 34.865254] hub 2-0:1.0: 8 ports detected
- [ 34.878907] libata version 3.00 loaded.
- [ 34.967045] PCI: Enabling device 0000:03:03.0 (0000 -> 0003)
- [ 34.967064] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 20 (level, low) -> IRQ 19
- [ 34.967083] PCI: Setting latency timer of device 0000:03:03.0 to 64
- [ 34.968224] eth0: RealTek RTL8139 at 0x1000, 00:1f:5b:a9:45:8f, IRQ 19
- [ 34.968229] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
- [ 34.987021] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- [ 34.996842] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
- [ 34.996894] PCI: Setting latency timer of device 0000:00:1f.1 to 64
- [ 34.996912] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
- [ 35.012420] ata_piix 0000:00:1f.1: version 2.12
- [ 35.012439] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
- [ 35.012483] PCI: Setting latency timer of device 0000:00:1f.1 to 64
- [ 35.022700] scsi0 : ata_piix
- [ 35.023500] scsi1 : ata_piix
- [ 35.024211] ata1: PATA max UDMA/100 cmd 0x2058 ctl 0x2064 bmdma 0x2040 irq 20
- [ 35.024217] ata2: PATA max UDMA/100 cmd 0x2050 ctl 0x2060 bmdma 0x2048 irq 20
- [ 35.187309] ata1.00: ATA-7: Hitachi HTS541616J9AT00, SB4AA77H, max UDMA/100
- [ 35.187316] ata1.00: 312581808 sectors, multi 0: LBA48
- [ 35.187348] ata1.00: limited to UDMA/33 due to 40-wire cable
- [ 35.203330] ata1.00: configured for UDMA/33
- [ 35.369880] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4A PQ: 0 ANSI: 5
- [ 35.378366] usb 2-1: new high speed USB device using ehci_hcd and address 2
- [ 35.498898] Driver 'sd' needs updating - please use bus_type methods
- [ 35.499017] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
- [ 35.499038] sd 0:0:0:0: [sda] Write Protect is off
- [ 35.499042] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 35.499068] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 35.499141] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
- [ 35.499157] sd 0:0:0:0: [sda] Write Protect is off
- [ 35.499161] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 35.499186] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 35.499193] sda:<6>usb 2-1: configuration #1 chosen from 1 choice
- [ 35.694150] usbcore: registered new interface driver libusual
- [ 35.700434] Initializing USB Mass Storage driver...
- [ 35.701613] scsi2 : SCSI emulation for USB Mass Storage devices
- [ 35.702249] usbcore: registered new interface driver usb-storage
- [ 35.702255] USB Mass Storage support registered.
- [ 35.702342] usb-storage: device found at 2
- [ 35.702345] usb-storage: waiting for device to settle before scanning
- [ 35.937999] GPT:Primary header thinks Alt. header is not at the end of the disk.
- [ 35.938005] GPT:78140159 != 312581807
- [ 35.938008] GPT:Alternate GPT header not at the end of the disk.
- [ 35.938012] GPT:78140159 != 312581807
- [ 35.938014] GPT: Use GNU Parted to correct GPT errors.
- [ 35.938020] sda1 sda2 sda3 sda4
- [ 35.938189] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 35.946631] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 36.077680] usb 1-2: new low speed USB device using uhci_hcd and address 2
- [ 36.255393] usb 1-2: configuration #1 chosen from 1 choice
- [ 36.303627] usbcore: registered new interface driver hiddev
- [ 36.360254] input: Apple Inc. IR Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input1
- [ 36.360291] input,hidraw0: USB HID v1.11 Device [Apple Inc. IR Receiver] on usb-0000:00:1d.0-2
- [ 36.360313] usbcore: registered new interface driver usbhid
- [ 36.360318] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
- [ 40.697327] usb-storage: device scan complete
- [ 40.697972] scsi 2:0:0:0: Direct-Access SanDisk Cruzer 1.00 PQ: 0 ANSI: 2
- [ 40.703807] sd 2:0:0:0: [sdb] 7837696 512-byte hardware sectors (4013 MB)
- [ 40.704680] sd 2:0:0:0: [sdb] Write Protect is off
- [ 40.704685] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
- [ 40.704689] sd 2:0:0:0: [sdb] Assuming drive cache: write through
- [ 40.707173] sd 2:0:0:0: [sdb] 7837696 512-byte hardware sectors (4013 MB)
- [ 40.708046] sd 2:0:0:0: [sdb] Write Protect is off
- [ 40.708051] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
- [ 40.708054] sd 2:0:0:0: [sdb] Assuming drive cache: write through
- [ 40.708059] sdb:<4>GPT:disk_guids don't match.
- [ 40.716893] GPT:partition_entry_array_crc32 values don't match: 0x16e72aff != 0x94c1e20a
- [ 40.716898] GPT:Primary header thinks Alt. header is not at the end of the disk.
- [ 40.716903] GPT:7831551 != 7837695
- [ 40.716906] GPT:Alternate GPT header not at the end of the disk.
- [ 40.716909] GPT:7831551 != 7837695
- [ 40.716912] GPT: Use GNU Parted to correct GPT errors.
- [ 40.716917] sdb1 sdb2 sdb3 sdb4
- [ 40.717120] sd 2:0:0:0: [sdb] Attached SCSI removable disk
- [ 40.717179] sd 2:0:0:0: Attached scsi generic sg1 type 0
- [ 45.947305] kjournald starting. Commit interval 5 seconds
- [ 45.947319] EXT3-fs: mounted filesystem with ordered data mode.
- [ 47.798170] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 47.870150] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 48.021932] Linux agpgart interface v0.102
- [ 48.821861] intel_rng: FWH not detected
- [ 48.877193] input: PC Speaker as /devices/platform/pcspkr/input/input2
- [ 49.142104] PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
- [ 49.142132] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
- [ 49.142169] PCI: Setting latency timer of device 0000:00:1b.0 to 64
- [ 49.201666] iTCO_vendor_support: vendor-support=0
- [ 49.286434] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
- [ 49.286558] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
- [ 49.286609] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 49.356780] input: Power Button (FF) as /devices/virtual/input/input3
- [ 49.372573] ACPI: Power Button (FF) [PWRF]
- [ 49.372687] input: Power Button (CM) as /devices/virtual/input/input4
- [ 49.384552] ACPI: Power Button (CM) [PWRB]
- [ 49.756217] Loading crystalhd v3.5.0
- [ 50.389487] nvidia: module license 'NVIDIA' taints kernel.
- [ 51.538998] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
- [ 51.566453] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 51.790481] udev: renamed network interface eth0 to eth1
- [ 52.234515] crystalhd 0000:02:00.0: Starting Device:0x1612
- [ 52.234554] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
- [ 52.234564] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
- [ 52.234574] crystalhd 0000:02:00.0: bar0:0x22400000-0x00010000 bar2:0x22000000-0x00400000
- [ 52.234612] crystalhd 0000:02:00.0: i2o_addr:0xd11e0000 Mapped addr:0xd1280000
- [ 52.737274] PCI: Setting latency timer of device 0000:02:00.0 to 64
- [ 52.737491] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
- [ 52.737504] PCI: Setting latency timer of device 0000:01:00.0 to 64
- [ 52.737671] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
- [ 53.913307] loop: module loaded
- [ 53.975829] lp: driver loaded but no devices found
- [ 54.311818] Adding 499992k swap on /dev/sdb4. Priority:-1 extents:1 across:499992k
- [ 62.408694] EXT3 FS on sdb3, internal journal
- [ 62.755626] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 64.213228] NET: Registered protocol family 17
- [ 65.037361] No dock devices found.
- [ 66.443066] NET: Registered protocol family 10
- [ 66.443658] lo: Disabled Privacy Extensions
- [ 112.077372] Marking TSC unstable due to: cpufreq changes.
- [ 112.083995] Time: hpet clocksource has been installed.
- [ 112.750266] Clocksource tsc unstable (delta = -82764149 ns)
- [ 69.844434] eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1
- [ 77.100719] crystalhd 0000:02:00.0: Entering chd_dec_open
- [ 77.100728] crystalhd 0000:02:00.0: Opening new user[0] handle
- [ 79.174765] crystalhd 0000:02:00.0: Firmware Downloaded Successfully
- xbmc@AppleTV:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement