Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- $ adb shell
- root@android:/ # dmesg
- <6>Initializing cgroup subsys cpu
- <5>Linux version 2.6.32.9 (erik@myhost) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-188) ) #171 PREEMPT Mon Oct 24 21:41:48 CDT 2011
- <4>CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
- <4>CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- <4>Machine: encore
- <4>Ignoring unrecognised tag 0x54410008
- <4>Memory policy: ECC disabled, Data cache writeback
- <7>On node 0 totalpages: 131072
- <7>free_area_init_node: node 0, pgdat c0637f50, node_mem_map c0702000
- <7> Normal zone: 1024 pages used for memmap
- <7> Normal zone: 0 pages reserved
- <7> Normal zone: 130048 pages, LIFO batch:31
- <6>DIE ID: 535E00029EDC0000015EF5500602800F
- <6>OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
- <6>omap_sam_base (VA) == 0xfe400000
- <6>omap_sram_start (PA) == 0x40200000
- <6>omap_sram_size (SIZE) == 0x10000
- <6>SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
- <6>Reserving 14745600 bytes SDRAM for VRAM
- <4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
- <5>Kernel command line: console=ttyO0,115200n8 rw init=/init videoout=omap24xxvout omap_vout_mod.video1_numbuffers=6 omap_vout_mod.vid1_static_vrfb_alloc=y omap_vout_mod.video2_numbuffers=6 omap_vout_mod.vid2_static_vrfb_alloc=y omapfb.vram=0:8M no_console_suspend
- <6>PID hash table entries: 2048 (order: 1, 8192 bytes)
- <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>Memory: 256MB 256MB = 512MB total
- <5>Memory: 491520KB available (5684K code, 1103K data, 180K init, 0K highmem)
- <5>Virtual kernel memory layout:
- <5> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5> vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
- <5> lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- <5> pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5> modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5> .init : 0xc0008000 - 0xc0035000 ( 180 kB)
- <5> .text : 0xc0035000 - 0xc05c2000 (5684 kB)
- <5> .data : 0xc05ea000 - 0xc063c4d8 ( 330 kB)
- <6>NR_IRQS:402
- <6>IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- <6>Total of 96 interrupts on 1 active controller
- <6>Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
- <6>Reprogramming SDRC clock to 332000000 Hz
- <6>GPMC revision 5.0
- <6>OMAP GPIO hardware version 2.5
- <6>OMAP clockevent source: GPTIMER1 at 32768 Hz
- <4>Console: colour dummy device 80x30
- <6>Calibrating delay loop... 598.53 BogoMIPS (lpj=583680)
- <4>Mount-cache hash table entries: 512
- <6>Initializing cgroup subsys freezer
- <6>Initializing cgroup subsys bfqio
- <6>CPU: Testing write buffer coherency: ok
- <6>regulator: core version 0.5
- <6>NET: Registered protocol family 16
- <6>ram_console: got buffer at 8e000000, size 20000
- <6>ram_console: found existing buffer, size 26176, start 26176
- <6>console [ram-1] enabled
- <4>board-3621_evt1a.c: audio_dac_3100_dev_init ...
- <4>board-3621_evt1a.c: audio_dac_3100_dev_init > set AUDIO_CODEC_RESET_GPIO to output Low!
- <4>board-3621_evt1a.c: audio_dac_3100_dev_init ...
- <4>board-3621_evt1a.c: audio_dac_3100_dev_init > set AUDIO_CODEC_POWER_ENABLE_GPIO to output and value high!
- <4>board-3621_evt1a.c: audio_dac_3100_dev_init > set AUDIO_CODEC_RESET_GPIO to output and value high!
- <4>Enabling backlight PWM for LCD
- <4>board-3621_evt1a.c: kxtf9_dev_init ...
- <4>board-3621_evt1a.c: kxtf9_dev_init > Init kxtf9 irq pin 113 !
- <4>board-3621_evt1a.c: max17042_dev_init ...
- <4>board-3621_evt1a.c: max17042_dev_init > Init max17042 irq pin 100 !
- <4>max17042 GPIO pin read 1
- <6>CPU variant: OMAP3621 Board: 800MHz only
- <4>encore: registering wl127x device.
- <4>encore: registering btwilink device.
- <6>OMAP DMA hardware revision 5.0
- <4>bio: create slab <bio-0> at 0
- <6>regulator: vdd_lcdtp: 3300 mV normal
- <5>SCSI subsystem initialized
- <6>usbcore: registered new interface driver usbfs
- <6>usbcore: registered new interface driver hub
- <6>usbcore: registered new device driver usb
- <6>i2c_omap i2c_omap.1: bus 1 rev4.0 at 100 kHz
- <4>TWL4030: Bad order of scripts (sleep script before wakeup) Leads to bootfailure on some boards
- <6>twl4030: PIH (irq 7) chaining IRQs 368..375
- <6>twl4030: power (irq 373) chaining IRQs 376..383
- <6>twl4030: gpio (irq 368) chaining IRQs 384..401
- <3>SD/MMC devices, enumerating first eMMC.
- <3>SD/MMC devices, checking for SD card devices attached.
- <6>regulator: VUSB1V5: 1500 mV normal standby
- <6>regulator: VUSB1V8: 1800 mV normal standby
- <6>regulator: VUSB3V1: 3100 mV normal standby
- <7>twl4030_usb twl4030_usb: USB_DTCT_CTRL=04
- <7>twl4030_usb twl4030_usb: HW_CONDITIONS 0xf0/240; link 1
- <7>twl4030_usb twl4030_usb: twl4030_usb_set_mode: ULPI mode
- <6>twl4030_usb twl4030_usb: Initialized TWL4030 USB module, charger detection activated
- <6>regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
- <6>i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
- <6>Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
- <6>Bluetooth: Core ver 2.15
- <6>NET: Registered protocol family 31
- <6>Bluetooth: HCI device and connection manager initialized
- <6>Bluetooth: HCI socket layer initialized
- <6>Switching to clocksource 32k_counter
- <6>musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
- <7>HS USB OTG: revision 0x40, sysconfig 0x2005, sysstatus 0x1, intrfsel 0x1, simenable 0x0
- <7>musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine (X), bulk split (X), HB-ISO Rx, HB-ISO Tx, SoftConn)
- <7>musb_hdrc: MHDRC RTL version 1.800
- <7>musb_hdrc: setup fifo_mode 4
- <7>musb_hdrc: 28/31 max ep, 16384/16384 memory
- <6>musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
- <6>NET: Registered protocol family 2
- <6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- <6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- <6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- <6>TCP: Hash tables configured (established 16384 bind 16384)
- <6>TCP reno registered
- <6>NET: Registered protocol family 1
- <6>Trying to unpack rootfs image as initramfs...
- <6>Freeing initrd memory: 196K
- <6>dspbridge_init: 600000 bytes @ 81a00000
- <6>evt_wifi_init: start
- <4>Enabling VAUX for wifi
- <6>omap-iommu omap-iommu.0: isp registered
- <6>iovmm-omap initialized isp, major: 253, base-minor: 0
- <6>ashmem: initialized
- <5>VFS: Disk quotas dquot_6.5.2
- <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- <5>Slow work thread pool: Starting up
- <5>Slow work thread pool: Ready
- <6>msgmni has been set to 960
- <6>alg: No test for stdrng (krng)
- <6>io scheduler noop registered
- <6>io scheduler anticipatory registered
- <6>io scheduler deadline registered
- <6>io scheduler cfq registered
- <6>io scheduler bfq registered (default)
- <6>OMAP DSS rev 2.0
- <6>OMAP DISPC rev 3.0
- <6>dsi_init calling
- <6>OMAP DSI rev 1.0
- <4>Enabling power for LCD
- <4>spi_probe mode : 0, per_word 16, chip_select 0, speed 375000, master_bus 4,master_cs 1
- <6>omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
- <6>console [ttyO0] enabled
- <6>omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
- <6>brd: module loaded
- <6>loop: module loaded
- <6>encore_modem_mgr: Initializing Encore Modem Manager
- <6>(stk) :sysfs entries created
- <4>kim: copied platform data
- <6>(stk) : debugfs entries created
- <6>PPP generic driver version 2.4.2
- <6>PPP Deflate Compression module registered
- <6>PPP BSD Compression module registered
- <6>PPP MPPE Compression module registered
- <6>NET: Registered protocol family 24
- <6>PPPoL2TP kernel driver, V1.0
- <6>tun: Universal TUN/TAP device driver, 1.6
- <6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <7>ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
- <6>Initializing USB Mass Storage driver...
- <6>usbcore: registered new interface driver usb-storage
- <6>USB Mass Storage support registered.
- <6>usbcore: registered new interface driver usbserial
- <6>USB Serial support registered for generic
- <6>usbcore: registered new interface driver usbserial_generic
- <6>usbserial: USB Serial Driver core
- <6>USB Serial support registered for Garmin GPS usb/tty
- <6>usbcore: registered new interface driver garmin_gps
- <6>garmin_gps: v0.33:garmin gps driver
- <6>USB Serial support registered for navman
- <6>usbcore: registered new interface driver navman
- <6>USB Serial support registered for pl2303
- <6>usbcore: registered new interface driver pl2303
- <6>pl2303: Prolific PL2303 USB to serial adaptor driver
- <6>android init
- <6>android_probe pdata: c05fbec8
- <6>android_bind
- <7>android_bind_config
- <6>android_usb gadget: android_usb ready
- <6>musb_hdrc musb_hdrc: MUSB HDRC host driver
- <7>drivers/usb/core/inode.c: creating file 'devices'
- <7>drivers/usb/core/inode.c: creating file '001'
- <6>musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
- <7>usb usb1: default language 0x0409
- <7>usb usb1: udev 1, busnum 1, minor = 0
- <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>usb usb1: Product: MUSB HDRC host driver
- <6>usb usb1: Manufacturer: Linux 2.6.32.9 musb-hcd
- <6>usb usb1: SerialNumber: musb_hdrc
- <7>usb usb1: uevent
- <7>usb usb1: usb_probe_device
- <6>usb usb1: configuration #1 chosen from 1 choice
- <7>usb usb1: adding 1-0:1.0 (config #1, interface 0)
- <7>usb 1-0:1.0: uevent
- <7>hub 1-0:1.0: usb_probe_interface
- <7>hub 1-0:1.0: usb_probe_interface - got id
- <6>hub 1-0:1.0: USB hub found
- <6>hub 1-0:1.0: 1 port detected
- <7>hub 1-0:1.0: standalone hub
- <7>hub 1-0:1.0: individual port power switching
- <7>hub 1-0:1.0: no over-current protection
- <7>hub 1-0:1.0: power on to power good time: 10ms
- <7>hub 1-0:1.0: 100mA bus power budget for each child
- <7>hub 1-0:1.0: local power source is good
- <7>hub 1-0:1.0: enabling power on all ports
- <7>drivers/usb/core/inode.c: creating file '001'
- <6>f_adb init
- <6>android_register_function adb
- <6>f_mass_storage init
- <6>android_register_function usb_mass_storage
- <6>mass_storage_bind_config
- <6>fsg_probe pdata: c05fb258
- <6>android_usb gadget: Number of LUNs=2
- <6>adb_bind_config
- <6>mice: PS/2 mouse device common for all mice
- <6>input: gpio-keys as /devices/platform/gpio-keys/input/input0
- <6>input: twl4030-keypad as /devices/platform/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input1
- <6>usbcore: registered new interface driver xpad
- <6>xpad: X-Box pad driver
- <6>cyttsp_init:Cypress TrueTouch(R) Standard Product
- <6>cyttsp_init:I2C Touchscreen Driver (Built Oct 24 2011 @ 21:37:12)
- <4>cyttsp:Reseting TMA340
- <4>cyttsp:Start Probe 1.2
- <7>hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- <4>
- <4>cyttsp::found BL, Overriding maxx & maxy
- <6>cyttsp_initialize:cyttsp-i2c: Register input device
- <6>input: cyttsp-i2c as /devices/platform/i2c_omap.2/i2c-2/2-0022/input/input2
- <6>cyttsp_initialize:Setting up interrupt 259
- <6>cyttsp_initialize:cyttsp_initialize: Create sysfs_group successfully!
- <4>cyttsp:Start Probe PASS
- <4>max8903_charger_enable: dtct_status 0x04
- <6>ft5x06_init() - FT I2C Touchscreen Driver (Built Oct 24 2011 @ 21:37:13)
- <3>can't get ft5x06 xreset GPIO
- <6>android_usb gadget: high speed config #1: android
- <6>cyttsp_power_on:BL101: f=00 s=11 err=D0 bl=010B bld=010B R=16
- <7>musb_hdrc periph: enabled ep1in for bulk IN, dma, maxpacket 512
- <6>cyttsp_power_on:BL102: tver=1100 a_id=AA1D aver=0006
- <7>musb_hdrc periph: enabled ep1out for bulk OUT, dma, maxpacket 512
- <6>cyttsp_power_on:BL103: c_id=C0C1C2
- <6>kxtf9 1-000f: WHO_AM_I = 0x01
- <6>input: kxtf9_accel as /devices/virtual/input/input3
- <6>using rtc device, twl_rtc, for alarms
- <6>twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- <6>i2c /dev entries driver
- <6>Linux video capture interface: v2.00
- <6>omap-previewer omap-previewer: omap-previewer: Registered preview wrapper
- <6>omap3isp omap3isp: Revision 15.0 found
- <6>omap-iommu omap-iommu.0: isp: version 1.1
- <7>Saving csi2 context
- <7>Restoring csi2 context
- <7>Saving csi2 context
- <6>usbcore: registered new interface driver uvcvideo
- <6>USB Video Class driver (v0.1.0)
- <4>max17042: max17042_init ...
- <4>max17042: max17042_probe ...
- <4>max17042: next history save at 4294845705
- <4>max17042: max17042_probe > IRQ is 260
- <4>max17042 GPIO pin read 1
- <4>max17042: max17042_device_power_on ...
- <4>max17042: max17042_hw_init ...
- <4>max17042: BATTERY Detected!
- <4>config = 0x2214
- <4>Valert = 0xff9b
- <4>Salert = 0xff05
- <4>config = 0x2214
- <4>config = 0x2214
- <4>shdntimer = 0x0002
- <4>max17042: max17042_verify ...
- <6>max17042 1-0036: Version = 0x0092
- <6>max17042 1-0036: support ver. 1.0.0 enabled
- <4>MAXIM 8903 Charger registering!
- <4>MAXIM 8903 Charger Initializing...
- <4>MAXIM8903: Request CHARGER FLT IRQ successfully!
- <4>max8903_charger_enable: USB CHARGER(500mA) Detected!
- <4>MAX8903: Charging is now enabled!
- <6>OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- <6>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- <6>Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
- <6>[imoseyon] interactive enter
- <6>cpuidle: using governor ladder
- <6>cpuidle: using governor menu
- <6>MMC LOG:mmc_log_init() - MMC Logging ENABLED.
- <6>omap_pwm_led omap_pwm_led: OMAP PWM LED (lcd-backlight) at GP timer 8/0
- <6>Registered led device: lcd-backlight
- <6>cyttsp_power_on:SI102: tver=1100 a_id=AA1D aver=0006
- <6>cyttsp_power_on:SI103: c_id=C0C1C2
- <6>usbcore: registered new interface driver usbhid
- <6>usbhid: v2.6:USB HID core driver
- <6>logger: created 64K log 'log_main'
- <6>logger: created 256K log 'log_events'
- <6>logger: created 64K log 'log_radio'
- <6>logger: created 64K log 'log_system'
- <6>Advanced Linux Sound Architecture Driver Version 1.0.21.
- <6>usbcore: registered new interface driver snd-usb-audio
- <6>mmc0: new high speed MMC card at address 0001
- <6>mmcblk0: mmc0:0001 SEM08G 7.39 GiB
- <1>##+tlv320dac3100_init
- <6> mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 >
- <4>IRQ 317/dac3100: IRQF_DISABLED is not guaranteed on shared IRQs
- <1>##-tlv320dac3100_init
- <4>No device for DAI TLV320dac3100
- <4>No device for DAI omap-mcbsp-dai-0
- <4>No device for DAI omap-mcbsp-dai-1
- <4>No device for DAI omap-mcbsp-dai-2
- <4>No device for DAI omap-mcbsp-dai-3
- <4>No device for DAI omap-mcbsp-dai-4
- <4>No device for DAI null
- <6>asoc: TLV320dac3100 <-> omap-mcbsp-dai-0 mapping ok
- <6>asoc: TLV320dac3100 <-> omap-mcbsp-dai-1 mapping ok
- <6>asoc: null <-> omap-mcbsp-dai-1 mapping ok
- <6>asoc: null <-> omap-mcbsp-dai-2 mapping ok
- <4>mmc1: host does not support reading read-only switch. assuming write-enable.
- <6>mmc1: new high speed SDHC card at address b368
- <6>mmcblk1: mmc1:b368 USD 7.46 GiB
- <6> mmcblk1: p1
- <6>ALSA device list:
- <6> #0: OMAP3 EDP (dac3100)
- <6>oprofile: using timer
- <4>Netfilter messages via NETLINK v0.30.
- <4>nf_conntrack version 0.5.0 (7686 buckets, 30744 max)
- <4>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- <4>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- <4>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- <4>ctnetlink v0.93: registering with nfnetlink.
- <6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>xt_time: kernel timezone is -0000
- <6>ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>arp_tables: (C) 2002 David S. Miller
- <6>TCP cubic registered
- <6>Initializing XFRM netlink socket
- <6>NET: Registered protocol family 17
- <6>NET: Registered protocol family 15
- <6>Bluetooth: L2CAP ver 2.14
- <6>Bluetooth: L2CAP socket layer initialized
- <6>Bluetooth: SCO (Voice Link) ver 0.6
- <6>Bluetooth: SCO socket layer initialized
- <6>Bluetooth: RFCOMM TTY layer initialized
- <6>Bluetooth: RFCOMM socket layer initialized
- <6>Bluetooth: RFCOMM ver 1.11
- <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>Bluetooth: BNEP filters: protocol multicast
- <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <3>Power Management for TI OMAP3.
- <6><6>SR: Nvalues not fused for1.2G, disabled
- <6>SR1:Fused Nvalues for VDD1OPP3 11191994
- <6>SR1:Fused Nvalues for VDD1OPP2 10126330
- <6>SR1:Fused Nvalues for VDD1OPP1 10078660
- <6>sr1_opp_margin[1]=37500
- <6>sr1_opp_margin[2]=37500
- <6>sr1_opp_margin[3]=37500
- <6>sr1_opp_margin[4]=62500
- <6>sr1_opp_margin[5]=62500
- <6>steps added, volt will berecaliberated automatically
- <6>SR2:Fused Nvalues for VDD2OPP1 10085085
- <6>SmartReflex driver initialized
- <7>Disabling unused clock "uart3_ick"
- <7>Disabling unused clock "gpio2_dbck"
- <7>Disabling unused clock "gpio3_dbck"
- <7>Disabling unused clock "gpio4_dbck"
- <7>Disabling unused clock "gpio6_dbck"
- <7>Disabling unused clock "uart3_fck"
- <7>Disabling unused clock "sad2d_ick"
- <7>Disabling unused clock "dpll4_m6x2_ck"
- <7>Disabling unused clock "dpll4_m5x2_ck"
- <7>Disabling unused clock "dpll3_m3x2_ck"
- <7>Disabling unused clock "sys_clkout1"
- <6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- <3>rotation = 0, var->rotate = 0
- <6>OMAP DISPCONTROL read (stallmode)0
- <6>OMAP DISPCONTROL read (gpout)1
- <6>OMAP DISPCONTROL read (stallmode)1
- <3>omapdss DSS error: Requested pixel clock not possible with the current OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning the constraint off.
- <4>omapdss DPI: Could not find exact pixel clock. Requested 68000 kHz, got 66461 kHz
- <4>pvr: Initializing 3rd party display driver
- <4>pvr: Found 1 framebuffers
- <4>pvr: -> Populating display device 0
- <4>pvr: Flipping support
- <4>pvr: Buffers available: 3 (2457600 bytes per buffer)
- <6>twl_rtc twl_rtc: setting system clock to 2011-12-03 17:33:39 UTC (1322933619)
- <7>Restoring csi2 context
- <6>omap3 omap3isp CSI memvs initted
- <7>Saving csi2 context
- <6>omap_vout: registered and initialized video device 2 [v4l2]
- <6>omap_vout: registered and initialized video device 3 [v4l2]
- <6>Freeing init memory: 180K
- <7>usb usb1: uevent
- <7>usb 1-0:1.0: uevent
- <3>init: cannot open '/initlogo.rle'
- <6>EXT4-fs (mmcblk0p5): mounted filesystem without journal
- <6>EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode
- <6>EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode
- <3>init: cannot execve('/system/bin/pvrsrvinit'): Permission denied
- <3>init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
- <3>init: cannot find '/system/bin/uim-sysfs', disabling 'uim'
- <3>SR1.5 is enabled by default instead of class3
- <3>SR1.5 is enabled by default instead of class3
- <6>enabling adb
- <6>proc_load: Processor Loaded /system/lib/dsp/baseimage.dof
- <6>omap mailbox rev 4.0
- <6>proc_start: dsp in running state
- <3>procwrap_detach: deprecated dspbridge ioctl
- <7>hub 1-0:1.0: hub_suspend
- <7>usb usb1: bus auto-suspend
- <6>warning: `rild' uses 32-bit capabilities (legacy support in use)
- <6>adb_open
- <6>android_usb gadget: high speed config #1: android
- <7>musb_hdrc periph: enabled ep2in for bulk IN, dma, maxpacket 512
- <7>musb_hdrc periph: enabled ep2out for bulk OUT, dma, maxpacket 512
- <7>musb_hdrc periph: enabled ep1in for bulk IN, dma, maxpacket 512
- <7>musb_hdrc periph: enabled ep1out for bulk OUT, dma, maxpacket 512
- <3>init: untracked pid 1027 exited
- <3>init: untracked pid 1115 exited
- <3>init: untracked pid 1127 exited
- <3>init: untracked pid 1121 exited
- <3>init: untracked pid 1131 exited
- <3>init: untracked pid 1133 exited
- <3>init: untracked pid 1137 exited
- <3>init: untracked pid 1143 exited
- <3>init: untracked pid 1139 exited
- <3>init: untracked pid 1147 exited
- <3>init: untracked pid 1149 exited
- <3>init: untracked pid 1153 exited
- <3>init: untracked pid 1163 exited
- <3>init: untracked pid 1170 exited
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement