Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # dmesg
- Copyright (c) 1992-2013 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 9.1-STABLE #0 r+16f6355: Tue Aug 27 00:38:40 PDT 2013
- root@build.ixsystems.com:/tank/home/jkh/src/freenas/os-base/amd64/tank/home/jkh/src/freenas/FreeBSD/src/sys/FREENAS.amd64 amd64
- gcc version 4.2.1 20070831 patched [FreeBSD]
- CPU: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz (2000.04-MHz K8-class CPU)
- Origin = "GenuineIntel" Id = 0x6fd Family = 0x6 Model = 0xf Stepping = 13
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
- AMD Features=0x20100800<SYSCALL,NX,LM>
- AMD Features2=0x1<LAHF>
- TSC: P-state invariant, performance statistics
- real memory = 6442450944 (6144 MB)
- avail memory = 6181888000 (5895 MB)
- Event timer "LAPIC" quality 400
- ACPI APIC Table: <GBT GBTUACPI>
- FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
- FreeBSD/SMP: 1 package(s) x 2 core(s)
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 1
- WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
- ioapic0: Changing APIC ID to 2
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- kbd1 at kbdmux0
- aesni0: No AESNI support.
- cryptosoft0: <software crypto> on motherboard
- acpi0: <GBT GBTUACPI> on motherboard
- acpi0: Power Button (fixed)
- acpi0: reservation of 0, a0000 (3) failed
- acpi0: reservation of 100000, f3de0000 (3) failed
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- attimer0: <AT timer> port 0x40-0x43 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 450
- Event timer "HPET1" frequency 14318180 Hz quality 440
- Event timer "HPET2" frequency 14318180 Hz quality 440
- Event timer "HPET3" frequency 14318180 Hz quality 440
- atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
- Event timer "RTC" frequency 32768 Hz quality 0
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
- acpi_button0: <Power Button> on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- uhci0: <Intel 82801I (ICH9) USB controller> port 0xe000-0xe01f irq 16 at device 26.0 on pci0
- usbus0 on uhci0
- uhci1: <Intel 82801I (ICH9) USB controller> port 0xe100-0xe11f irq 21 at device 26.1 on pci0
- usbus1 on uhci1
- uhci2: <Intel 82801I (ICH9) USB controller> port 0xe500-0xe51f irq 18 at device 26.2 on pci0
- usbus2 on uhci2
- ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfd005000-0xfd0053ff irq 18 at device 26.7 on pci0
- usbus3: EHCI version 1.0
- usbus3 on ehci0
- pci0: <multimedia, HDA> at device 27.0 (no driver attached)
- pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
- pci2: <ACPI PCI bus> on pcib2
- atapci0: <JMicron JMB368 UDMA133 controller> port 0xb000-0xb007,0xb100-0xb103,0xb200-0xb207,0xb300-0xb303,0xb400-0xb40f irq 19 at device 0.0 on pci2
- ata2: <ATA channel> at channel 0 on atapci0
- pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
- pci3: <ACPI PCI bus> on pcib3
- re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xfa000000-0xfa000fff irq 16 at device 0.0 on pci3
- re0: Using 1 MSI message
- re0: Chip rev. 0x38000000
- re0: MAC rev. 0x00000000
- miibus0: <MII bus> on re0
- rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
- rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
- re0: Ethernet address: 00:1d:7d:a2:7a:90
- uhci3: <Intel 82801I (ICH9) USB controller> port 0xe200-0xe21f irq 23 at device 29.0 on pci0
- usbus4 on uhci3
- uhci4: <Intel 82801I (ICH9) USB controller> port 0xe300-0xe31f irq 19 at device 29.1 on pci0
- usbus5 on uhci4
- uhci5: <Intel 82801I (ICH9) USB controller> port 0xe400-0xe41f irq 18 at device 29.2 on pci0
- usbus6 on uhci5
- ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfd004000-0xfd0043ff irq 23 at device 29.7 on pci0
- usbus7: EHCI version 1.0
- usbus7 on ehci1
- pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
- pci4: <ACPI PCI bus> on pcib4
- re1: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfc000000-0xfc0000ff irq 18 at device 2.0 on pci4
- re1: Chip rev. 0x10000000
- re1: MAC rev. 0x00000000
- miibus1: <MII bus> on re1
- rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
- rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
- re1: Ethernet address: 00:14:d1:22:aa:1f
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- atapci1: <Intel ICH9 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f,0xfc00-0xfc0f at device 31.2 on pci0
- ata0: <ATA channel> at channel 0 on atapci1
- ata1: <ATA channel> at channel 1 on atapci1
- pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
- atapci2: <Intel ICH9 SATA300 controller> port 0xe700-0xe707,0xe800-0xe803,0xe900-0xe907,0xea00-0xea03,0xeb00-0xeb0f,0xec00-0xec0f irq 19 at device 31.5 on pci0
- ata3: <ATA channel> at channel 0 on atapci2
- ata4: <ATA channel> at channel 1 on atapci2
- fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
- uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- uart0: console (9600,n,8,1)
- ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
- ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
- ppbus0: <Parallel port bus> on ppc0
- lpt0: <Printer> on ppbus0
- lpt0: Interrupt-driven port
- atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- acpi_perf0: <ACPI CPU Frequency Control> on cpu0
- coretemp0: <CPU On-Die Thermal Sensors> on cpu0
- p4tcc0: <CPU Frequency Thermal Control> on cpu0
- coretemp1: <CPU On-Die Thermal Sensors> on cpu1
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr a270a2706000a27
- device_attach: est1 attach returned 6
- p4tcc1: <CPU Frequency Thermal Control> on cpu1
- Timecounters tick every 1.000 msec
- usbus0: 12Mbps Full Speed USB v1.0
- ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
- DUMMYNET 0xfffffe0002bb5740 with IPv6 initialized (100409)
- load_dn_sched dn_sched WF2Q+ loaded
- load_dn_sched dn_sched FIFO loaded
- load_dn_sched dn_sched PRIO loaded
- load_dn_sched dn_sched QFQ loaded
- load_dn_sched dn_sched RR loaded
- usbus1: 12Mbps Full Speed USB v1.0
- ugen0.1: <Intel> at usbus0
- uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
- ugen1.1: <Intel> at usbus1
- uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
- usbus2: 12Mbps Full Speed USB v1.0
- usbus3: 480Mbps High Speed USB v2.0
- ugen2.1: <Intel> at usbus2
- uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
- ugen3.1: <Intel> at usbus3
- uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
- usbus4: 12Mbps Full Speed USB v1.0
- usbus5: 12Mbps Full Speed USB v1.0
- ugen4.1: <Intel> at usbus4
- uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
- ugen5.1: <Intel> at usbus5
- uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
- uhub0: 2 ports with 2 removable, self powered
- usbus6: 12Mbps Full Speed USB v1.0
- usbus7: 480Mbps High Speed USB v2.0
- ugen6.1: <Intel> at usbus6
- uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
- uhub1: 2 ports with 2 removable, self powered
- ugen7.1: <Intel> at usbus7
- uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
- uhub2: 2 ports with 2 removable, self powered
- uhub4: 2 ports with 2 removable, self powered
- uhub5: 2 ports with 2 removable, self powered
- uhub6: 2 ports with 2 removable, self powered
- ada0 at ata0 bus 0 scbus1 target 0 lun 0
- ada0: <WDC WD20EARX-42R6B0 02.00A02> ATA-8 SATA 1.x device
- ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
- ada0: 1907728MB (3907027055 512 byte sectors: 16H 63S/T 16383C)
- ada0: quirks=0x1<4K>
- ada0: Previously was known as ad0
- ada1 at ata1 bus 0 scbus2 target 0 lun 0
- ada1: <WDC WD20EARX-42R6B0 02.00A02> ATA-8 SATA 1.x device
- ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
- ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
- ada1: quirks=0x1<4K>
- ada1: Previously was known as ad2
- ada2 at ata3 bus 0 scbus3 target 0 lun 0
- ada2: <WDC WD20EARX-42R6B0 02.00A02> ATA-8 SATA 1.x device
- ada2: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
- ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
- ada2: quirks=0x1<4K>
- ada2: Previously was known as ad6
- ada3 at ata4 bus 0 scbus4 target 0 lun 0
- ada3: <WDC WD20EARX-42R6B0 02.00A02> ATA-8 SATA 1.x device
- ada3: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
- ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
- ada3: quirks=0x1<4K>
- ada3: Previously was known as ad8
- SMP: AP CPU #1 Launched!
- Timecounter "TSC" frequency 2000039940 Hz quality 1000
- uhub3: 6 ports with 6 removable, self powered
- GEOM: ada2: the secondary GPT table is corrupt or invalid.
- GEOM: ada2: using the primary only -- recovery suggested.
- uhub7: 6 ports with 6 removable, self powered
- GEOM: ada3: the secondary GPT table is corrupt or invalid.
- GEOM: ada3: using the primary only -- recovery suggested.
- ugen3.2: <vendor 0x13fe> at usbus3
- umass0: <vendor 0x13fe product 0x3d00, class 0/0, rev 2.00/1.00, addr 2> on usbus3
- da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
- da0: < PMAP> Removable Direct Access SCSI-0 device
- da0: 40.000MB/s transfers
- da0: 7389MB (15133248 512 byte sectors: 255H 63S/T 942C)
- da0: quirks=0x2<NO_6_BYTE>
- ugen2.2: <APC> at usbus2
- Trying to mount root from ufs:/dev/ufs/FreeNASs1a [ro]...
- ZFS filesystem version: 5
- ZFS storage pool version: features support (5000)
- GEOM_RAID5: Module loaded, version 1.1.20110927.40 (rev 00ce00e5abb4)
- GEOM_MULTIPATH: disk1 created
- GEOM_MULTIPATH: ada3 added to disk1
- GEOM_MULTIPATH: ada3 is now active path in disk1
- GEOM_MULTIPATH: disk2 created
- GEOM_MULTIPATH: ada2 added to disk2
- GEOM_MULTIPATH: ada2 is now active path in disk2
- GEOM: multipath/disk1: corrupt or invalid GPT detected.
- GEOM: multipath/disk1: GPT rejected -- may not be recoverable.
- GEOM: multipath/disk2: corrupt or invalid GPT detected.
- GEOM: multipath/disk2: GPT rejected -- may not be recoverable.
- GEOM_ELI: Device ada0p1.eli created.
- GEOM_ELI: Encryption: AES-XTS 256
- GEOM_ELI: Crypto: software
- GEOM_ELI: Device ada1p1.eli created.
- GEOM_ELI: Encryption: AES-XTS 256
- GEOM_ELI: Crypto: software
Add Comment
Please, Sign In to add comment