[    0.000000@0] Initializing cgroup subsys cpu

[    0.000000@0] Linux version 3.0.61 (digma@dev.ddixlab.com) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 SMP PREEMPT Wed Jan 30 17:59:48 MSK 2013

[    0.000000@0] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d

[    0.000000@0] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache

[    0.000000@0] Machine: Amlogic Meson6 g02-d7 customer platform

[    0.000000@0] Ignoring unrecognised tag 0x00000000

[    0.000000@0] Ignoring tag cmdline (using the default kernel command line)

[    0.000000@0] Memory policy: ECC disabled, Data cache writealloc

[    0.000000@0] On node 0 totalpages: 218368

[    0.000000@0] free_area_init_node: node 0, pgdat c09a8640, node_mem_map c0b69000

[    0.000000@0]   Normal zone: 1022 pages used for memmap

[    0.000000@0]   Normal zone: 0 pages reserved

[    0.000000@0]   Normal zone: 86274 pages, LIFO batch:15

[    0.000000@0]   HighMem zone: 1026 pages used for memmap

[    0.000000@0]   HighMem zone: 130046 pages, LIFO batch:31

[    0.000000@0] PERCPU: Embedded 7 pages/cpu @c1372000 s6016 r8192 d14464 u32768

[    0.000000@0] pcpu-alloc: s6016 r8192 d14464 u32768 alloc=8*4096

[    0.000000@0] pcpu-alloc: [0] 0 [0] 1

[    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 216320

[    0.000000@0] Kernel command line: init=/init console=ttyS0,115200n8 hlt no_console_suspend vmalloc=256m mem=1024m logo=osd1,loaded,panel hdmitx=vdacoff,powermode1,unplug_powerdown a9_clk_max=1320000000

[    0.000000@0] osd1:1

[    0.000000@0] loaded:268435459

[    0.000000@0] logo has been loaded

[    0.000000@0] panel:16

[    0.000000@0] HDMI DEBUG: hdmitx_boot_para_setup [1668]

[    0.000000@0] HDMI hdmi_cec_func_config:0x0

[    0.000000@0] hdmi: set init powermode 1

[    0.000000@0] HDMI hdmi_cec_func_config:0x0

[    0.000000@0] HDMI hdmi_cec_func_config:0x0

[    0.000000@0] PID hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000000@0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000@0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.000000@0] Memory: 64MB 277MB 512MB = 853MB total

[    0.000000@0] Memory: 853088k/853088k available, 20384k reserved, 524288K highmem

[    0.000000@0] Virtual kernel memory layout:

[    0.000000@0]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000@0]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

[    0.000000@0]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)

[    0.000000@0]     vmalloc : 0xe0000000 - 0xf0000000   ( 256 MB)

[    0.000000@0]     lowmem  : 0xc0000000 - 0xdff00000   ( 511 MB)

[    0.000000@0]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

[    0.000000@0]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

[    0.000000@0]       .text : 0xc0008000 - 0xc08cfe24   (8992 kB)

[    0.000000@0]       .init : 0xc08d0000 - 0xc094e780   ( 506 kB)

[    0.000000@0]       .data : 0xc0950000 - 0xc09a94c0   ( 358 kB)

[    0.000000@0]        .bss : 0xc09a94c0 - 0xc0b68c90   (1790 kB)

[    0.000000@0] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

[    0.000000@0] Preemptible hierarchical RCU implementation.

[    0.000000@0] 	Verbose stalled-CPUs detection is disabled.

[    0.000000@0] NR_IRQS:256

[    0.000000@0] gic_init: irq_offset=0

[    0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms

[    0.000000@0] MESON TIMER-A c0962e80

[    0.000000@0] Disable timerA

[    0.000000@0] Console: colour dummy device 80x30

[    0.000000@0] console [ttyS0] enabled

[    0.020000@0] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)

[    0.100055@0] pid_max: default: 32768 minimum: 301

[    0.102272@0] Mount-cache hash table entries: 512

[    0.107561@0] Initializing cgroup subsys cpuacct

[    0.110067@0] Initializing cgroup subsys net_cls

[    0.114640@0] CPU: Testing write buffer coherency: ok

[    0.120585@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200

[    0.126151@0] MESON TIMER-B c0962f40

[    0.130038@0] Disable timerA

[    0.132840@0] Disable timerB

[    0.135713@0] Disable timerA

[    0.140122@0] L310 cache controller enabled

[    0.144146@0] l2x0: 8 ways, CACHE_ID 0x4100a0c8, AUX_CTRL 0x7e462c01, Cache size: 524288 B

[    0.150032@0] ===actlr=0x41

[    0.152744@0] ===actlr=0x4b

[    0.160007@0] SCU_CTRL: scu_ctrl=0x69

[    0.163645@0] pl310: aux=0x7e462c01, prefetch=0x31000006

[    0.020000@1] CPU1: Booted secondary processor

[    0.020000@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201

[    0.020000@1] MESON TIMER-D c09630c0

[    0.320049@0] Brought up 2 CPUs

[    0.320060@0] SMP: Total of 2 processors activated (3188.32 BogoMIPS).

[    0.320169@1] Disable timerD

[    0.320169@1] CPU1: Unknown IPI message 0x0

[    0.340143@0] devtmpfs: initialized

[    0.353037@0] clkrate [ xtal ] : 24000000

[    0.353071@0] clkrate [ pll_sys ] : 800000000

[    0.356751@0] clkrate [ pll_fixed ] : 2000000000

[    0.360015@0] clkrate [ pll_vid2 ] : 612000000

[    0.364420@0] clkrate [ pll_hpll ] : 378000000

[    0.370075@0] clkrate [ pll_ddr ] : 516000000

[    0.374341@0] clkrate [ a9_clk ] : 800000000

[    0.378657@0] clkrate [ clk81 ] : 200000000

[    0.380105@0] clkrate [ usb0 ] : 0

[    0.383482@0] clkrate [ usb1 ] : 0

[    0.390257@0] print_constraints: dummy:

[    0.393758@0] NET: Registered protocol family 16

[    0.399941@0] [wifi_dev_init] in

[    0.400015@0] [wifi_clock_enable] in

[    0.403777@0] register lm device 0

[    0.406977@0] register lm device 1

[    0.410117@0] chip version=ff00fd40

[    0.413474@0] tv_init_module

[    0.416353@0] major number 254 for disp


[    0.420010@0] vout_register_server

[    0.423381@0] register tv module server ok


[    0.427664@0] major number 0 for disp


[    0.430008@0] register tv module server ok


[    0.434277@0] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_init

[    0.440030@0] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_probe

[    0.445556@0] master_no = 0, resource = c09986a8, maseter_regs=f1108500

[    0.450221@0] aml-i2c aml-i2c.0: add adapter aml_i2c_adap0(d0011828)

[    0.460010@0] aml-i2c aml-i2c.0: aml i2c bus driver.

[    0.464981@0] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_probe

[    0.470009@0] master_no = 1, resource = c0998700, maseter_regs=f11087c0

[    0.476730@0] aml-i2c aml-i2c.1: add adapter aml_i2c_adap1(d0012028)

[    0.480010@0] aml-i2c aml-i2c.1: aml i2c bus driver.

[    0.490043@0] drivers/amlogic/i2c/aml_i2c.c : aml_i2c_probe

[    0.495549@0] master_no = 2, resource = c0998758, maseter_regs=f3100500

[    0.500102@0] aml-i2c aml-i2c.2: add adapter aml_i2c_adap2(d0012828)

[    0.506335@0] aml-i2c aml-i2c.2: aml i2c bus driver.

[    0.512459@0] axp_mfd 2-0034: AXP (CHIP ID: 0x21) detected

[    0.523813@0] HDMI DEBUG: amhdmitx_init [1568]

[    0.523860@0] HDMI DEBUG: amhdmitx_probe [1344]

[    0.528047@1] Set HDMI:Chip C

[    0.528119@0] amhdmitx amhdmitx.0: HDMI: cannot get platform data

[    0.528221@0] hdmitx: register switch dev failed

[    0.528240@0] amhdmitx: probe of amhdmitx.0 failed with error -2

[    0.546266@0] bio: create slab <bio-0> at 0

[    0.546864@0] SCSI subsystem initialized

[    0.547000@0] usbcore: registered new interface driver usbfs

[    0.547092@0] usbcore: registered new interface driver hub

[    0.547221@0] usbcore: registered new device driver usb

[    0.547331@0] LCD driver init

[    0.547425@0] LCD probe ok

[    0.547434@0] lcd actual active area size: 0 0 (mm).

[    0.547441@0] vout_register_server

[    0.550714@0] print_constraints: vcck: 966 <--> 1339 mV at 1339 mV

[    0.551076@0] Advanced Linux Sound Architecture Driver Version 1.0.24.

[    0.551505@0] Bluetooth: Core ver 2.16

[    0.551553@0] NET: Registered protocol family 31

[    0.551562@0] Bluetooth: HCI device and connection manager initialized

[    0.551576@0] Bluetooth: HCI socket layer initialized

[    0.551585@0] Bluetooth: L2CAP socket layer initialized

[    0.551610@0] Bluetooth: SCO socket layer initialized

[    0.552225@0] Switching to clocksource Timer-E

[    0.630027@1] HDMI DEBUG: HDMITX_M1B_Init [3256]

[    0.634600@1] HDMI DEBUG: HDMITX_M1B_Init [3259]

[    0.639900@0] NET: Registered protocol family 2

[    0.639900@0] Switched to NOHz mode on CPU #0

[    0.639900@0] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)

[    0.639900@0] TCP established hash table entries: 65536 (order: 7, 524288 bytes)

[    0.639900@0] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)

[    0.639900@0] TCP: Hash tables configured (established 65536 bind 65536)

[    0.639900@0] TCP reno registered

[    0.639900@0] UDP hash table entries: 256 (order: 1, 8192 bytes)

[    0.639900@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

[    0.639900@0] NET: Registered protocol family 1

[    0.640138@0] RPC: Registered named UNIX socket transport module.

[    0.640149@0] RPC: Registered udp transport module.

[    0.640156@0] RPC: Registered tcp transport module.

[    0.640164@0] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.655556@0] highmem bounce pool size: 64 pages

[    0.662550@0] NTFS driver 2.1.30 [Flags: R/W].

[    0.662812@0] fuse init (API version 7.16)

[    0.663315@0] yaffs: yaffs built Jan 30 2013 17:59:41 Installing.

[    0.663357@0] msgmni has been set to 642

[    0.665306@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)

[    0.665322@0] io scheduler noop registered

[    0.665329@0] io scheduler deadline registered

[    0.665405@0] io scheduler cfq registered (default)

[    0.756655@1] Switched to NOHz mode on CPU #1

[    0.761031@1] HDMI DEBUG: hdmi_hw_init [1190]

[    0.761083@0] cfg80211: Calling CRDA for country: RU

[    0.770277@1] hdmi phy setting

[    0.773360@1] hdmi phy setting

[    0.776383@1] CEC not init

[    0.777057@0] loop: module loaded

[    0.778364@0] PPP generic driver version 2.4.2

[    0.778652@0] PPP Deflate Compression module registered

[    0.778662@0] PPP BSD Compression module registered

[    0.779090@0] PPP MPPE Compression module registered

[    0.779102@0] NET: Registered protocol family 24

[    0.779157@0] PPTP driver version 0.8.5

[    0.779429@0] tun: Universal TUN/TAP device driver, 1.6

[    0.779442@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[    0.780286@0] hso: drivers/net/usb/hso.c: Option Wireless

[    0.780414@0] usbcore: registered new interface driver hso

[    0.780472@0] usbcore: registered new interface driver asix

[    0.780542@0] usbcore: registered new interface driver cdc_ether

[    0.780585@0] usbcore: registered new interface driver cdc_eem

[    0.780628@0] usbcore: registered new interface driver dm9601

[    0.780681@0] usbcore: registered new interface driver smsc75xx

[    0.780735@0] usbcore: registered new interface driver smsc95xx

[    0.780779@0] usbcore: registered new interface driver gl620a

[    0.780822@0] usbcore: registered new interface driver net1080

[    0.780864@0] usbcore: registered new interface driver plusb

[    0.780905@0] usbcore: registered new interface driver rndis_host

[    0.780971@0] usbcore: registered new interface driver MOSCHIP usb-ethernet driver

[    0.781037@0] usbcore: registered new interface driver kalmia

[    0.781045@0] cdc_ncm: 04-Aug-2011

[    0.781086@0] usbcore: registered new interface driver cdc_ncm

[    0.781129@0] usbcore: registered new interface driver lg-vl600

[    0.781227@0] usbcore: registered new interface driver cdc_acm

[    0.781235@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

[    0.781244@0] Initializing USB Mass Storage driver...

[    0.781296@0] usbcore: registered new interface driver usb-storage

[    0.781304@0] USB Mass Storage support registered.

[    0.781452@0] usbcore: registered new interface driver usbserial

[    0.781496@0] USB Serial support registered for generic

[    0.781547@0] usbcore: registered new interface driver usbserial_generic

[    0.781556@0] usbserial: USB Serial Driver core

[    0.781593@0] USB Serial support registered for GSM modem (1-port)

[    0.781645@0] usbcore: registered new interface driver option

[    0.781653@0] option: v0.7.2:USB Driver for GSM modems

[    0.781688@0] USB Serial support registered for pl2303

[    0.781756@0] usbcore: registered new interface driver pl2303

[    0.781764@0] pl2303: Prolific PL2303 USB to serial adaptor driver

[    0.782417@0] mousedev: PS/2 mouse device common for all mice

[    0.782430@0] i2c /dev entries driver

[    0.783053@0] Linux video capture interface: v2.00

[    0.783662@0] device-mapper: uevent: version 1.0.3

[    0.784105@0] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com

[    0.784524@0] device-mapper: multipath: version 1.3.0 loaded

[    0.784536@0] device-mapper: multipath round-robin: version 1.0.0 loaded

[    0.784548@0] Bluetooth: HCI UART driver ver 2.2

[    0.784558@0] Bluetooth: HCI H4 protocol initialized

[    0.785147@0] usbcore: registered new interface driver usbhid

[    0.785155@0] usbhid: USB HID core driver

[    0.785983@0] ashmem: initialized

[    0.786181@0] logger: created 256K log 'log_main'

[    0.786359@0] logger: created 256K log 'log_events'

[    0.786521@0] logger: created 256K log 'log_radio'

[    0.786674@0] logger: created 256K log 'log_system'

[    0.787017@0] vout_init_module

[    0.787060@0] start init vout module


[    0.787109@0] create  vout attribute ok


[    0.787158@0] ge2d_init

[    0.787173@0] ge2d_dev major:248


[    0.787468@0] ge2d start monitor


[    0.787608@0] osd_init

[    0.787666@0] [osd0] 0x84100000-0x850fffff

[    0.788326@0] Frame buffer memory assigned at phy:0x84100000, vir:0xe1000000, size=16384K

[    0.788337@0] ---------------clear framebuffer0 memory


[    0.800026@0] ge2d workqueue monitor start


[    0.803658@0] [osd1] 0x85100000-0x851fffff

[    0.803730@0] Frame buffer memory assigned at phy:0x85100000, vir:0xe0200000, size=1024K

[    0.803739@0] init fbdev bpp is :16


[    0.804065@0] osd probe ok


[    0.804139@0] osd_ext_init

[    0.804235@0] [osd2] 0x85200000-0x856fffff

[    0.804456@0] Frame buffer memory assigned at phy:0x85200000, vir:0xe0800000, size=5120K

[    0.822345@0] [osd3] 0x85700000-0x857fffff

[    0.822417@0] Frame buffer memory assigned at phy:0x85700000, vir:0xe0400000, size=1024K

[    0.842185@0] osd-ext probe ok


[    0.842420@0] vout2_init_module enter

[    0.842459@0] start init vout2 module


[    0.842519@0] create  vout2 attribute ok


[    0.843053@0]  set pinmux c099ed78

[    0.843068@0]  set pinmux c099ed80

[    0.843075@0]  set pinmux c099ed88

[    1.202462@1] hdmi phy setting

[    1.204698@1] power off hdmi, unmux hpd

[    1.208519@1] Hdmi phy suspend

[    1.211557@1] HDMI: reset intr mask

[    1.215012@1] HDMI Gate Clock is off, turn on now

[    1.230034@1] HDMI DEBUG: hdmi_task_handle [1080]

[    1.300069@0] UART_ttyS0:(irq = 122)

[    1.460062@0] UART_ttyS1:(irq = 58)

[    1.620057@0] UART_ttyS2:(irq = 107)

[    1.620201@0] Amlogic A/V streaming port init

[    1.624300@0] regist mpeg12 codec profile

[    1.626457@0] regist mpeg4 codec profile

[    1.630354@0] amvdec_vc1 module init

[    1.633924@0] regist vc1 codec profile

[    1.637613@0] amvdec_h264 module init

[    1.641316@0] regist h264 codec profile

[    1.645115@0] regist mjpeg codec profile

[    1.648977@0] amvdec_real module init

[    1.652686@0] regist real codec profile

[    1.657890@0] Amlogic nand flash uboot driver, Version K1.01.003 (c) 2010 Amlogic Inc.

[    1.664386@0] ####Version of Uboot must be newer than U1.01.001!!!!!

[    1.670827@0] 2

[    1.672504@0] chip->controller=c0b4fa18

[    1.676354@0] init bus_cycle=17, bus_timing=10, start_cycle=10, end_cycle=10,system=5.0ns

[    1.684926@0] No NAND device found.

[    1.688191@0] NAND device id: 2c 88 4 4b a9 0

[    1.692401@0] NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron C revision NAND 8GiB MT29F64G-C)

[    1.702026@0] #####aml_nand_init, with RB pins and chip->chip_delay:20

[    1.708355@0] bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5.0ns

[    1.715914@0] Creating 1 MTD partitions on "C revision NAND 8GiB MT29F64G-C":

[    1.722871@0] 0x000000000000-0x000000800000 : "bootloader"

[    1.729495@0] chip->controller=c0b4fa18

[    1.732178@0] init bus_cycle=17, bus_timing=10, start_cycle=10, end_cycle=10,system=5.0ns

[    1.740743@0] No NAND device found.

[    1.744001@0] NAND device id: 2c 88 4 4b a9 0

[    1.748198@0] NAND device: Manufacturer ID: 0x2c, Chip ID: 0x2c (Micron C revision NAND 8GiB MT29F64G-C)

[    1.944747@0] 1 NAND chips detected

[    1.944831@0] #####aml_nand_init, with RB pins and chip->chip_delay:20

[    1.949198@0] bus_cycle=4, bus_timing=5, start_cycle=5, end_cycle=6,system=5.0ns

[    1.956596@0]  oob layout use nand base oob layout oobsize = 32,oobmul =2,mtd->oobsize =896,aml_chip->oob_size =448

[    2.031989@0] aml nand env valid addr: 9a0000

[    2.032024@0] CONFIG_ENV_SIZE=0x8000; ENV_SIZE=0x7ffc; bbt=0x1330; default_environment_size=0x6ccc

[    2.064109@0] nand env: nand_env_probe.

[    2.064681@0]  NAND bbt detect Bad block at b400000

[    2.067469@0] Creating 8 MTD partitions on "C revision NAND 8GiB MT29F64G-C":

[    2.074588@0] 0x000001000000-0x000001800000 : "logo"

[    2.080527@0] 0x000001800000-0x000002000000 : "aml_logo"

[    2.085715@0] 0x000002000000-0x000002800000 : "recovery"

[    2.091001@0] 0x000002800000-0x000003000000 : "boot"

[    2.095961@0] 0x000003000000-0x000023000000 : "system"

[    2.100187@0]  NAND bbt detect Bad block at b400000

[    2.106021@0] 0x000023000000-0x000033000000 : "cache"

[    2.111170@0] 0x000033000000-0x000073000000 : "userdata"

[    2.116393@0] 0x000073000000-0x000200000000 : "NFTL_Part"

[    3.249174@0] nftl initilize completely dev size: 0x70c00000 39

[    3.253168@0]  avnftli: avnftli1

[    3.253464@0] nftl release flush cache data: 0

[    3.257357@0] _nftl_init_bounce_buf already init

[    3.261848@0] aml_nftl_add_mtd ok

[    3.265341@0] Memory Card media Major: 253

[    3.269263@0] card max_req_size is 128K

[    3.274018@0] card creat process sucessful

[    3.277258@0] SARADC Driver init.

[    3.280589@0] saradc use internal calibration

[    3.390147@0] cal[0]=12

[    3.500145@0] cal[1]=264

[    3.610142@0] cal[2]=515

[    3.720141@0] cal[3]=766

[    3.830142@0] cal[4]=1017

[    3.830162@0] saradc calibration ok

[    3.830730@0] ADC Keypad Driver init.

[    3.834372@0] chan #4 used for ADC key

[    3.838064@0] vol- key(114) registed.

[    3.841718@0] vol+ key(115) registed.

[    3.845517@0] input: adc_keypad as /devices/platform/m1-adckp.0/input/input0

[    3.852951@0] adc keypad register input device completed.


[    3.857873@0] adc keypad major:243


[    3.861746@0] Meson KeyInput init

[    3.864692@0] Key 116 registed.

[    3.867879@0] input: key_input as /devices/platform/meson-keyinput.0/input/input1

[    3.875508@0] Meson KeyInput major=242

[    3.879255@0] Simcard detect Driver init.

[    3.883100@0] simdetect major:241


[    3.886710@0] print_constraints: axp20_ldo1: 1300 mV

[    3.892756@0] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV

[    3.899561@0] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2500 mV

[    3.906341@0] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 3300 mV

[    3.913916@0] print_constraints: axp20_buck2: 1000 <--> 2275 mV at 1600 mV

[    3.920249@1] sd_mmc_info->card_type=0

[    3.920840@0] print_constraints: axp20_buck3: 1000 <--> 3500 mV at 1250 mV

[    3.921413@0] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV

[    3.921725@0] input: axp20-supplyer as /devices/i2c-2/2-0034/axp20-supplyer.28/input/input2

[    3.944834@1] begin SDIO check ......

[    3.971051@1] sdio_timeout_int_times = 0; timeout = 497

[    3.993665@1] sdio_timeout_int_times = 0; timeout = 498

[    3.993699@1] SEND OP timeout @1

[    3.996735@1] begin SD&SDHC check ......

[    4.020446@1] set type to SDHC

[    4.446457@0] [dsp]DSP start addr 0xc4000000

[    4.446521@0] [dsp]register dsp to char divece(232)

[    4.455551@0] DSP pcmenc stream buffer to [0x99401000-0x99601000]

[    4.456114@0] amlogic audio dsp pcmenc device init!

[    4.461492@0] amlogic audio spdif interface device init!

[    4.467303@0] using rtc device, aml_rtc, for alarms

[    4.471173@0] aml_rtc aml_rtc: rtc core: registered aml_rtc as rtc0

[    4.478481@0] amvdec_656in module init

[    4.481191@0] amvdec_656in probe start.

[    4.484937@0] amvdec_656in probe end.

[    4.484948@1] S18A : 0

[    4.491341@0]  vdin[0] memory start addr is 88000000, mem_size is 2800000 .

[    4.497952@0] vdin0: flags:0x0

[    4.501176@0] vdin: driver initialized ok

[    4.505078@0] efuse===========================================

[    4.511140@0] efuse: device efuse created

[    4.514838@0] efuse--------------------------------------------

[    4.520788@0] platform_driver_register--aml_keys_driver--------------------

[    4.527841@0] boot_monitor: device successfully initialized.

[    4.533496@0] boot_monitor: driver successfully loaded.

[    4.538530@0] i2c i2c-1: mpu3050: +mma845x

[    4.542590@0] i2c i2c-1: WARNING: Accel irq not assigned

[    4.547863@0] i2c i2c-1: mpu3050: No Compass Present

[    4.552838@0] i2c i2c-1: mpu3050: No Pressure Present

[    4.552846@1] Got RCA = 4660

[    4.560735@1]

[    4.560739@1] ***********CID*************

[    4.566349@1] 02:54:4d:53:41:30:38:47:04:9c:00:00:58:00:a2:00:

[    4.571991@1] MID[8]=2

[    4.574508@1] OID[16]=TM

[    4.577026@1] PNM[40]=SA08G

[    4.579803@1] PRV[8]=4

[    4.581903@0] i2c i2c-1: Installing irq using 97

[    4.581914@0] i2c i2c-1: Module Param interface = mpuirq

[    4.582226@0] i2c-core: driver [mpu3050] using legacy suspend method

[    4.582235@0] i2c-core: driver [mpu3050] using legacy resume method

[    4.582487@0] freescale_init

[    4.582991@0] aml_wdt_init, register platform driver...

[    4.583073@0] dwc_otg: version 2.94a 30-AUG-2012

[    4.617342@1] PSN[32]=0x5800009c

[    4.620527@1] Reserved[4]=0

[    4.623290@1] year[8].month[4]=2010.2

[    4.626935@1] NotUsed[1]=0

[    4.629626@1] CRC[7]=0

[    4.629629@1]

[    4.634363@1]

[    4.634368@1] ********** CSD v2 **************

[    4.639695@1] 40:0e:00:32:5b:59:00:00:3b:67:7f:80:0a:40:00:00:

[    4.645337@1] CSD_STRUCTURE[2]=1

[    4.648722@1] Reserved1[6]=0

[    4.651600@1] TAAC[8]=14

[    4.654103@1] NSAC[8]=0

[    4.656534@1] TRAN_SPEED[8]=50

[    4.659572@1] CCC[8+4]=0x5b5

[    4.662447@1] READ_BL_LEN[4]=9

[    4.665475@1] READ_BL_PARTIAL[1]=0

[    4.668860@1] WRITE_BLK_MISALIGN[1]=0

[    4.672515@1] READ_BLK_MISALIGN[1]=0

[    4.676063@1] DSR_IMP[1]=0

[    4.678754@1] Reserved2[4]=0

[    4.681629@1] Reserved3[2]=0

[    4.684483@1] C_SIZE[6+8+8]=15207

[    4.687781@1] Reserved4[1]=0

[    4.690655@1] ERASE_BLK_EN[1]=1

[    4.693770@1] SECTOR_SIZE[6+1]=127

[    4.697155@1] WP_GRP_SIZE[7]=0

[    4.700204@1] WP_GRP_ENABLE[1]=0

[    4.703406@1] Reserved5[2]=0

[    4.706270@1] R2W_FACTOR[3]=2

[    4.709221@1] WRITE_BL_LEN[2+2]=9

[    4.712543@1] WRITE_BL_PARTIAL[1]=0

[    4.715992@1] Reserved6[5]=0

[    4.718856@1] FILE_FORMAT_GRP[1]=0

[    4.722253@1] COPY[1]=0

[    4.724672@1] PERM_WRITE_PROTECT[1]=0

[    4.728317@1] TMP_WRITE_PROTECT[1]=0

[    4.731887@1] FILE_FORMAT[2]=0

[    4.734914@1] Reserved7[2]=0

[    4.737778@1] CRC[7]=0

[    4.740134@1] NotUsed[1]=0

[    4.740137@1]

[    4.744863@1] total block nums : 0xeda000(15572992)

[    4.750491@1]

[    4.750495@1] ***********SCR*************

[    4.754965@1] 02:35:80:00:01:00:00:00:

[    4.758524@1] SD_SPEC[4]=2

[    4.761400@1] SCR_STRUCTURE[4]=0

[    4.764600@1] SD_BUS_WIDTHS[4]=5

[    4.767811@1] SD_SECURITY[3]=3

[    4.770858@1] DATA_STAT_AFTER_ERASE[1]=0

[    4.774754@1] Rsv1[7]=0

[    4.777185@1] SD_SPEC3[1]=1

[    4.779962@1] CMD_SUPPORT[2]=0

[    4.783010@1] Rsv2[6]=0

[    4.785432@1] Reserved2[32]=1

[    4.785436@1]

[    4.791956@1] 00648001 80018001 80018001 80030000

[    4.794806@1] 01000000 00000000 00000000 00000000

[    4.799580@1] 00000000 00000000 00000000 00000000

[    4.804354@1] 00000000 00000000 00000000 00000000

[    4.809129@1]

[    4.809132@1] ****************switch status****************

[    4.816357@1] Data_Struction_Verion : 0

[    4.820163@1] Max_Current_Consumption : 100

[    4.824319@1] Support[0] : 0x8001	Busy[0] : 0x0

[    4.828833@1] Support[1] : 0x8001	Busy[1] : 0x0

[    4.833346@1] Support[2] : 0x8001	Busy[2] : 0x0

[    4.837859@1] Support[3] : 0x8001	Busy[3] : 0x0

[    4.842373@1] Support[4] : 0x8001	Busy[4] : 0x0

[    4.846887@1] Support[5] : 0x8003	Busy[5] : 0x0

[    4.851400@1] Function_Group_Status6 : 0

[    4.855306@1] Function_Group_Status5 : 0

[    4.859212@1] Function_Group_Status4 : 0

[    4.863137@1] Function_Group_Status3 : 0

[    4.867024@1] Function_Group_Status2 : 0

[    4.870939@1] Function_Group_Status1 : 1

[    4.870944@1]

[    4.877477@1] 00648001 80018001 80018001 80030000

[    4.881259@1] 01000000 00000000 00000000 00000000

[    4.886033@1] 00000000 00000000 00000000 00000000

[    4.890806@1] 00000000 00000000 00000000 00000000

[    4.895580@1]

[    4.895583@1] ****************switch status****************

[    4.902793@1] Data_Struction_Verion : 0

[    4.906604@1] Max_Current_Consumption : 100

[    4.910794@1] Support[0] : 0x8001	Busy[0] : 0x0

[    4.915285@1] Support[1] : 0x8001	Busy[1] : 0x0

[    4.919799@1] Support[2] : 0x8001	Busy[2] : 0x0

[    4.924312@1] Support[3] : 0x8001	Busy[3] : 0x0

[    4.928826@1] Support[4] : 0x8001	Busy[4] : 0x0

[    4.933339@1] Support[5] : 0x8003	Busy[5] : 0x0

[    4.937852@1] Function_Group_Status6 : 0

[    4.941767@1] Function_Group_Status5 : 0

[    4.945665@1] Function_Group_Status4 : 0

[    4.949571@1] Function_Group_Status3 : 0

[    4.953489@1] Function_Group_Status2 : 0

[    4.957383@1] Function_Group_Status1 : 1

[    4.957387@1]

[    4.965779@0]  cardblksd: cardblksd1

[    4.966909@1] monitor : INSERT

[    5.086404@0] USB (0) use clock source: XTAL input

[    5.288031@0] Core Release: 2.94a

[    5.288059@0] Setting default values for core params

[    5.711933@0] Using Buffer DMA mode

[    5.711964@0] OTG VER PARAM: 1, OTG VER FLAG: 1

[    5.714386@0] Working on port type = OTG

[    5.718290@0] Current port type: SLAVE

[    5.722232@0] dwc_otg lm0: DWC OTG Controller

[    5.726457@0] dwc_otg lm0: new USB bus registered, assigned bus number 1

[    5.733094@0] dwc_otg lm0: irq 62, io mem 0x00000000

[    5.738059@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    5.744971@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    5.752463@0] usb usb1: Product: DWC OTG Controller

[    5.757178@0] usb usb1: Manufacturer: Linux 3.0.61 dwc_otg_hcd

[    5.763015@0] usb usb1: SerialNumber: lm0

[    5.767818@0] hub 1-0:1.0: USB hub found

[    5.770945@0] hub 1-0:1.0: 1 port detected

[    5.775199@0] Dedicated Tx FIFOs mode

[    5.778805@0] using timer detect id change, d9074c00

[    5.984402@0] Core Release: 2.94a

[    5.984433@0] Setting default values for core params

[    6.408339@0] Using Buffer DMA mode

[    6.408370@0] OTG VER PARAM: 1, OTG VER FLAG: 1

[    6.410927@0] Working on port type = HOST

[    6.414858@0] dwc_otg lm1: DWC OTG Controller

[    6.419164@0] dwc_otg lm1: new USB bus registered, assigned bus number 2

[    6.425853@0] dwc_otg lm1: irq 63, io mem 0x00000000

[    6.433852@0] Init: Port Power? op_state=1

[    6.434840@0] Init: Power Port (0)

[    6.438283@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

[    6.455123@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    6.456967@0] usb usb2: Product: DWC OTG Controller

[    6.461848@0] usb usb2: Manufacturer: Linux 3.0.61 dwc_otg_hcd

[    6.467643@0] usb usb2: SerialNumber: lm1

[    6.472514@0] hub 2-0:1.0: USB hub found

[    6.475570@0] hub 2-0:1.0: 1 port detected

[    6.479928@0] gt2005 0-003c: chip found @ 0x78 (aml_i2c_adap0)

[    6.485482@0] amlogic camera driver: gt2005_v4l2_init.

[    6.600466@0] i2c-core: driver [gt2005] using legacy suspend method

[    6.601205@0] i2c-core: driver [gt2005] using legacy resume method

[    6.607377@0] gc0308 0-0021: chip found @ 0x42 (aml_i2c_adap0)

[    6.760021@0] gc0308_init OK!!!!

[    6.760212@0] amlogic camera driver: gc0308_v4l2_uninit.

[    6.930024@0] gc0308_init OK!!!!

[    6.930062@0] +++found a init function, and run it..

[    6.932645@0] amlogic camera driver: gc0308_v4l2_uninit.

[    6.950042@1] +++found a uninit function, and run it..

[    6.950521@1] i2c-core: driver [gc0308] using legacy suspend method

[    6.955876@1] i2c-core: driver [gc0308] using legacy resume method

[    6.963029@1] amlogic 3G supply init

[    6.965787@1]  aml_modem_probe

[    6.968896@1] MU509 power_on!

[    6.968900@1]  modem_enable for MU509 !

[    7.023454@1]  amlogic rfkill init

[    7.770126@0] BT_RADIO going: on

[    7.770151@0] BCM_BT: going ON

[    7.830616@0] usbcore: registered new interface driver snd-usb-audio

[    7.832026@0] enter aml_dai_probe

[    7.832106@0] enter rt5631_audio_probe

[    7.924080@0] enter rt5631_codec_init rt5631_snd_pdata: c09988fc

[    7.927113@0] aml-pcm 0:preallocate_dma_buffer: area=ffd00000, addr=99380000, size=131072

[    7.930805@0] aml-pcm 1:preallocate_dma_buffer: area=ffda0000, addr=99340000, size=65536

[    7.937811@0] asoc: rt5631-hifi <-> aml-dai0 mapping ok

[    7.944185@0] input: AML-RT5631 hp switch as /devices/platform/soc-audio/sound/card0/input3

[    7.951988@0] ALSA device list:

[    7.954478@0]   #0: AML-RT5631

[    7.957515@0] ==ft5x0x_ts_init==

[    8.271738@0] ==ft5x0x_ts_probe=

[    8.271767@0] ==kzalloc=

[    8.271930@0] ==kzalloc success=

[    8.275240@0] ==enable Irq=

[    8.277930@0] ==enable Irq success=

[    8.281420@0] ==input_allocate_device=

[    8.285302@0] input: ft5x06 as /devices/virtual/input/input4

[    8.291152@0] ==register_early_suspend =

[    8.294846@0] [FST] Firmware version = 0x18

[    8.350189@0] [FST] Firmware old version = 0x18

[    8.350377@0] [FTS] do not upgrade.

[    8.562362@0] [FST] Firmware new version after update = 0x18

[    8.563662@0] ==probe over =

[    8.565381@0] ret=0

[    8.567580@0] u32 classifier

[    8.570431@0]     input device check on

[    8.574105@0] Netfilter messages via NETLINK v0.30.

[    8.579030@0] nf_conntrack version 0.5.0 (13329 buckets, 53316 max)

[    8.585668@0] ctnetlink v0.93: registering with nfnetlink.

[    8.590736@0] nf_conntrack_rtsp v0.6.21 loading

[    8.595196@0] NF_TPROXY: Transparent proxy support initialized, version 4.1.0

[    8.602493@0] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

[    8.608816@0] xt_time: kernel timezone is -0000

[    8.612887@0] IPv4 over IPv4 tunneling driver

[    8.617500@0] GRE over IPv4 demultiplexor driver

[    8.621606@0] GRE over IPv4 tunneling driver

[    8.626501@0] nf_nat_rtsp v0.6.21 loading

[    8.630208@0] ip_tables: (C) 2000-2006 Netfilter Core Team

[    8.635632@0] TCP bic registered

[    8.638680@0] TCP cubic registered

[    8.642090@0] TCP hybla registered

[    8.645449@0] Initializing XFRM netlink socket

[    8.650585@0] NET: Registered protocol family 10

[    8.655412@0] ip6_tables: (C) 2000-2006 Netfilter Core Team

[    8.660358@0] IPv6 over IPv4 tunneling driver

[    8.665153@0] NET: Registered protocol family 17

[    8.669009@0] NET: Registered protocol family 15

[    8.673745@0] Bluetooth: RFCOMM TTY layer initialized

[    8.678634@0] Bluetooth: RFCOMM socket layer initialized

[    8.683925@0] Bluetooth: RFCOMM ver 1.11

[    8.687809@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[    8.693431@0] Bluetooth: BNEP filters: protocol multicast

[    8.698668@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

[    8.704878@0] L2TP core driver, V2.0

[    8.708316@0] PPPoL2TP kernel driver, V2.0

[    8.712417@0] Registering the dns_resolver key type

[    8.717298@0] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

[    8.725140@0] enter meson_pm_probe!

[    8.728521@0] meson_pm_probe done !

[    8.737160@0] android_usb gadget: Mass Storage Function, version: 2009/09/11

[    8.739019@0] android_usb gadget: Number of LUNs=2

[    8.743824@0]  lun0: LUN: removable file: (no medium)

[    8.748827@0]  lun1: LUN: removable file: (no medium)

[    8.754320@0] android_usb gadget: android_usb ready

[    8.759150@0] aml_rtc aml_rtc: setting system clock to 2013-01-31 09:44:11 UTC (1359625451)

[    8.767138@0] Please be patient, while system loads ...

[    8.772613@0] Freeing init memory: 504K

[    8.778486@1] boot_timer_set: <start!>

[    8.779817@1] ** enable watchdog

[    8.940036@1] Changing baud for line 0 from 0 to 115200

[    8.960260@1] init: cannot open '/initlogo.rle'

[    9.040697@1] UBI: attaching mtd5 to ubi0

[    9.040725@1] UBI: physical eraseblock size:   4194304 bytes (4096 KiB)

[    9.045744@1] UBI: logical eraseblock size:    4161536 bytes

[    9.051406@1] UBI: smallest flash I/O unit:    16384

[    9.056333@1] UBI: VID header offset:          16384 (aligned 16384)

[    9.062678@1] UBI: data offset:                32768

[    9.104053@1]  NAND bbt detect Bad block at b400000

[    9.206872@1] UBI: max. sequence number:       78

[    9.210548@1] UBI: attached mtd5 to ubi0

[    9.210572@1] UBI: MTD device name:            "system"

[    9.215133@1] UBI: MTD device size:            512 MiB

[    9.220384@1] UBI: number of good PEBs:        127

[    9.225029@1] UBI: number of bad PEBs:         1

[    9.229629@1] UBI: number of corrupted PEBs:   0

[    9.234243@1] UBI: max. allowed volumes:       128

[    9.239003@1] UBI: wear-leveling threshold:    4096

[    9.243874@1] UBI: number of internal volumes: 1

[    9.248464@1] UBI: number of user volumes:     1

[    9.253092@1] UBI: available PEBs:             0

[    9.257664@1] UBI: total number of reserved PEBs: 127

[    9.262707@1] UBI: number of PEBs reserved for bad PEB handling: 5

[    9.268862@1] UBI: max/mean erase counter: 2/1

[    9.273311@1] UBI: image sequence number:  801789704

[    9.278249@0] UBI: background thread "ubi_bgt0d" started, PID 79

[    9.947540@1] UBIFS: mounted UBI device 0, volume 0, name "system"

[    9.948170@1] UBIFS: file system size:   453607424 bytes (442976 KiB, 432 MiB, 109 LEBs)

[    9.956275@1] UBIFS: journal size:       33292289 bytes (32512 KiB, 31 MiB, 6 LEBs)

[    9.963888@1] UBIFS: media format:       w4/r0 (latest is w4/r0)

[    9.969869@1] UBIFS: default compressor: lzo

[    9.974129@1] UBIFS: reserved for root:  4952683 bytes (4836 KiB)

[    9.981810@1] UBI: attaching mtd7 to ubi1

[    9.984193@1] UBI: physical eraseblock size:   4194304 bytes (4096 KiB)

[    9.990807@1] UBI: logical eraseblock size:    4161536 bytes

[    9.996430@1] UBI: smallest flash I/O unit:    16384

[   10.001422@1] UBI: VID header offset:          16384 (aligned 16384)

[   10.007713@1] UBI: data offset:                32768

[   10.295121@1] UBI: max. sequence number:       67

[   10.299067@1] UBI: attached mtd7 to ubi1

[   10.299090@1] UBI: MTD device name:            "userdata"

[   10.303572@1] UBI: MTD device size:            1024 MiB

[   10.308762@1] UBI: number of good PEBs:        256

[   10.313544@1] UBI: number of bad PEBs:         0

[   10.318136@1] UBI: number of corrupted PEBs:   0

[   10.322765@1] UBI: max. allowed volumes:       128

[   10.327511@1] UBI: wear-leveling threshold:    4096

[   10.332379@1] UBI: number of internal volumes: 1

[   10.336972@1] UBI: number of user volumes:     1

[   10.341579@1] UBI: available PEBs:             0

[   10.346172@1] UBI: total number of reserved PEBs: 256

[   10.351213@1] UBI: number of PEBs reserved for bad PEB handling: 10

[   10.357457@1] UBI: max/mean erase counter: 2/1

[   10.361889@1] UBI: image sequence number:  -961722877

[   10.366928@0] UBI: background thread "ubi_bgt1d" started, PID 81

[   10.700152@0] Indeed it is in host mode hprt0 = 00021501

[   10.880231@0] usb 2-1: new high speed USB device number 2 using dwc_otg

[   10.881814@0] Indeed it is in host mode hprt0 = 00001101

[   10.971150@1] UBIFS: mounted UBI device 1, volume 0, name "userdata"

[   10.971950@1] UBIFS: file system size:   969637888 bytes (946912 KiB, 924 MiB, 233 LEBs)

[   10.980051@1] UBIFS: journal size:       33292289 bytes (32512 KiB, 31 MiB, 8 LEBs)

[   10.987661@1] UBIFS: media format:       w4/r0 (latest is w4/r0)

[   10.993658@1] UBIFS: default compressor: lzo

[   10.997902@1] UBIFS: reserved for root:  4952683 bytes (4836 KiB)

[   11.006536@1] yaffs: dev is 32505862 name is "mtdblock6" rw

[   11.009533@1] yaffs: passed flags ""

[   11.013139@1] yaffs: Attempting MTD mount of 31.6,"mtdblock6"

[   11.015081@1] yaffs: yaffs_read_super: is_checkpointed 1

[   11.092189@1] UMP: UMP device driver 17 loaded

[   11.101770@0] usb 2-1: New USB device found, idVendor=19f5, idProduct=9013

[   11.103089@0] usb 2-1: New USB device strings: Mfr=4, Product=3, SerialNumber=0

[   11.110416@0] usb 2-1: Product: Qualcomm CDMA Technologies MSM

[   11.116217@0] usb 2-1: Manufacturer: Qualcomm, Incorporated

[   11.127442@0] option 2-1:1.0: GSM modem (1-port) converter detected

[   11.129283@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0

[   11.135620@0] option 2-1:1.1: GSM modem (1-port) converter detected

[   11.142498@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1

[   11.213453@0] option 2-1:1.2: GSM modem (1-port) converter detected

[   11.215482@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2

[   11.221605@0] option 2-1:1.3: GSM modem (1-port) converter detected

[   11.229580@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3

[   11.235076@0] option 2-1:1.4: GSM modem (1-port) converter detected

[   11.235649@1] mail version=-1

[   11.235677@1] Mali pp1 MMU register mapped at e00d8000...

[   11.235686@1] Mali pp2 MMU register mapped at e00da000...

[   11.255525@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB4

[   11.240028@1] mali_meson_poweron: Interrupt received.

[   11.335523@1] mail version=1

[   11.345621@1] mali_meson_poweron: Interrupt received.

[   11.435425@1] mail version=1

[   11.437404@1] Mali: Mali device driver loaded

[   11.522585@1] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.

[   11.535553@1] set_modemPowerState OFF

[   11.535580@1] MU509 power_off!

[   11.535583@1]  modem_disable for MU509 !

[   11.538459@1]

[   11.538926@0] option: option_instat_callback: error -110

[   11.538949@0] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected

[   11.538953@0]

[   11.538963@0] option: option_instat_callback: error -110

[   11.538971@0] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected

[   11.538974@0]

[   11.540093@0] usb 2-1: USB disconnect, device number 2

[   11.541430@0] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0

[   11.541508@0] option 2-1:1.0: device disconnected

[   11.542377@0] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1

[   11.542426@0] option 2-1:1.1: device disconnected

[   11.543166@0] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2

[   11.543233@0] option 2-1:1.2: device disconnected

[   11.543957@0] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3

[   11.544010@0] option 2-1:1.3: device disconnected

[   11.544689@0] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4

[   11.544738@0] option 2-1:1.4: device disconnected

[   11.637759@1] modem_disable for MU509 !

[   11.637766@1]

[   11.647072@1] BT_RADIO going: off

[   11.647095@1] BCM_BT: going OFF

[   11.796540@0] android_usb: already disabled

[   11.796924@0] adb_bind_config

[   11.801632@1] warning: `adbd' uses 32-bit capabilities (legacy support in use)

[   11.805484@0] adb_open

[   12.251227@1] tvmode set to panel

[   12.251237@1]


[   12.251274@1] don't set the same mode as current.


[   12.255665@1] osd0=>x:0 ,y:0,w:1024,h:600


[   12.255669@1]  osd1=> x:0,y:0,w:32,h:32


[   12.643535@0] modem_enable for MU509 !

[   12.643544@0]  set_modemPowerState ON

[   13.737682@1] MU509 power_on!

[   13.737691@1]  boot_timer_func: <timer expires, reset watchdog>

[   13.780075@1] ** reset watchdog

[   13.816467@1] modem_enable for MU509 !

[   13.816481@1]

[   14.830906@0] enter rt5631_set_bias_level level: 2

[   14.831001@1] enter rt5631_set_bias_level level: 1

[   14.831009@1] enter rt5631_set_bias_level level: 2

[   14.831681@0] enter rt5631_set_bias_level level: 3

[   14.831687@1] enter rt5631_set_bias_level level: 3

[   14.930071@1] rt5631 hp unpluged

[   15.781406@1] modem_disable for MU509 !

[   15.781414@1]  set_modemPowerState OFF

[   15.783597@1] MU509 power_off!

[   15.783602@1]  modem_disable for MU509 !

[   15.788290@1]  modem_enable for MU509 !

[   16.794412@1]  set_modemPowerState ON

[   17.686031@1] MU509 power_on!

[   17.686041@1]  modem_enable for MU509 !

[   17.770579@0]  boot_timer_func: <timer expires, reset watchdog>

[   18.790071@1] ** reset watchdog

[   21.450181@1] Indeed it is in host mode hprt0 = 00021501

[   21.630166@1] usb 2-1: new high speed USB device number 3 using dwc_otg

[   21.640124@1] Indeed it is in host mode hprt0 = 00001101

[   21.892493@1] usb 2-1: New USB device found, idVendor=19f5, idProduct=9013

[   21.893822@1] usb 2-1: New USB device strings: Mfr=4, Product=3, SerialNumber=0

[   21.904587@1] usb 2-1: Product: Qualcomm CDMA Technologies MSM

[   21.906937@1] usb 2-1: Manufacturer: Qualcomm, Incorporated

[   22.051684@1] option 2-1:1.0: GSM modem (1-port) converter detected

[   22.053406@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0

[   22.059808@1] option 2-1:1.1: GSM modem (1-port) converter detected

[   22.069172@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1

[   22.073731@1] option 2-1:1.2: GSM modem (1-port) converter detected

[   22.080654@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2

[   22.086441@1] option 2-1:1.3: GSM modem (1-port) converter detected

[   22.093582@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3

[   22.099618@1] option 2-1:1.4: GSM modem (1-port) converter detected

[   22.107050@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB4

[   23.730109@0] nftl creat stucture completely free blk: 56 erased blk: 0

[   23.800043@1] boot_timer_func: <timer expires, reset watchdog>

[   23.800330@1] ** reset watchdog

[   28.297514@0] request_suspend_state: wakeup (3->0) at 28297496001 (2013-01-31 09:44:31.036915999 UTC)

[   28.511086@1] BT_RADIO going: on

[   28.511116@1] BCM_BT: going ON

[   28.624983@0] Changing baud for line 1 from 0 to 115200

[   28.660149@0] Changing baud for line 1 from 115200 to 2000000

[   28.732186@0] modem_enable for MU509 !

[   28.732195@0]  boot_timer_func: <timer expires, reset watchdog>

[   28.810038@1] ** reset watchdog

[   29.030617@0] Changing baud for line 1 from 2000000 to 115200

[   29.120050@0] Changing baud for line 1 from 115200 to 2000000

[   29.241959@0] init timer

[   29.552920@0] modemPowerState is already ON now

[   29.733302@1] acc_open

[   29.733349@1] acc_release

[   29.768852@0] +++dhd_module_init+++

[   29.768897@0] [extern_wifi_set_enable] in

[   29.771041@0] WIFI  Disable!

[   29.774913@0] [extern_wifi_set_enable] in

[   29.777861@0] WIFI  Enable!

[   29.950134@0] [extern_wifi_set_enable] in

[   29.950158@0] WIFI  Enable!

[   29.950182@0] [extern_wifi_set_enable] in

[   29.950194@0] WIFI  Enable!

[   30.400294@0] sd_mmc_info->card_type=0

[   30.400363@0] begin SDIO check ......

[   30.459981@0] Changing baud for line 2 from 0 to 115200

[   30.460620@0] Got RCA = 1

[   30.465327@0] monitor : INSERT

[   30.465739@0] memorycard0: queuing unknown CIS tuple 0x80 (2 bytes)

[   30.465849@0] memorycard0: queuing unknown CIS tuple 0x80 (3 bytes)

[   30.465977@0] memorycard0: queuing unknown CIS tuple 0x80 (3 bytes)

[   30.466152@0] memorycard0: queuing unknown CIS tuple 0x80 (7 bytes)

[   30.510142@0] Changing baud for line 2 from 115200 to 4800

[   30.550138@1] =========== WLAN placed in POWER ON ========

[   30.565073@0] power off gps

[   30.567035@1] del timer

[   30.586871@1] Linux Kernel SDIO/MMC Driver

[   30.586987@1] dhd_customer_oob_irq_map: customer specific Host GPIO number is (101)

[   30.626696@1] F1 signature read @0x18000000=0x16044330

[   30.714579@0] DHD: dongle ram size is set to 294912(orig 294912)

[   30.714643@0] dhd_bus_select_firmware_name_by_chip: firmware_path=/system/etc/wifi/40183/fw_bcm40183b2.bin

[   30.718249@0] wl_create_event_handler thr:184 started

[   30.728676@1] wl_iw_attach thr:187 started

[   30.729009@1] wl_iw_bt_init thr:18d started

[   30.729176@1] dhd_attach thr:18e started

[   30.729312@1] dhd_attach thr:18f started

[   30.729413@1] dhd_attach thr:190 started

[   30.742876@1] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33

[   30.742890@1] [extern_wifi_set_enable] in

[   30.742925@1] WIFI  Disable!

[   30.742929@1] =========== WLAN placed in RESET ========

[   30.743016@1]

[   30.743019@1] Dongle Host Driver, version 5.90.195.26.1.6.1

[   30.743022@1] Compiled in drivers/net/wireless/bcmdhd on Jan 30 2013 at 18:00:05

[   30.743033@1] ---dhd_module_init---

[   30.812073@0] power on gps

[   32.038679@1] power off gps

[   32.243243@1] power on gps

[   32.351901@1]  written as a string:/system/etc/wifi/40183/fw_bcm40183b2.bin

[   32.834075@1] dhd_bus_select_firmware_name_by_chip: firmware_path=/system/etc/wifi/40183/fw_bcm40183b2.bin

[   32.850097@1]

[   32.850107@1] Dongle Host Driver, version 5.90.195.26.1.6.1

[   32.850110@1] Compiled in drivers/net/wireless/bcmdhd on Jan 30 2013 at 18:00:05

[   32.859165@1] wl_android_wifi_on in

[   32.870068@1] [extern_wifi_set_enable] in

[   32.870143@1] WIFI  Disable!

[   32.871688@1] [extern_wifi_set_enable] in

[   32.875487@1] WIFI  Enable!

[   32.878565@1] [extern_wifi_set_enable] in

[   32.893837@1] WIFI  Enable!

[   33.280087@1] Changing baud for line 2 from 4800 to 115200

[   33.340320@1] sd_mmc_info->card_type=0

[   33.340352@1] begin SDIO check ......

[   33.400487@1] Got RCA = 1

[   33.401041@1] =========== WLAN going back to live  ========

[   33.423616@1] F1 signature read @0x18000000=0x16044330

[   33.482970@0] DHD: dongle ram size is set to 294912(orig 294912)

[   33.483568@0] dhd_bus_select_firmware_name_by_chip: firmware_path=/system/etc/wifi/40183/fw_bcm40183b2.bin

[   33.820058@1] boot_timer_func: <timer expires, reset watchdog>

[   33.820072@1] ** reset watchdog

[   33.930134@1] Changing baud for line 2 from 115200 to 921600

[   34.057972@0] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.

[   34.237737@0] bcmsdh_register_oob_intr Enter

[   34.237787@0] bcmsdh_register_oob_intr IRQ=101 Type=411

[   34.245295@0] Firmware up: op_mode=1, Broadcom Dongle Host Driver mac=00:22:f4:1d:c2:2b

[   34.319540@1] dhd_rx_frame: net device is NOT registered yet. drop packet

[   34.320920@1] dhd_rx_frame: net device is NOT registered yet. drop packet

[   34.950469@0] boot_timer_set: <stop!>

[   34.950538@0] ** disable watchdog

[   35.330149@0] nftl release flush cache data: 0

[   35.422060@0] Uart  Driver: Framing Error while receiving a character

[   35.423012@0] Uart  Driver: Framing Error while receiving a character

[   35.680033@1] Changing baud for line 2 from 921600 to 115200

[   36.320157@1] dhd_bus_rxctl: resumed on timeout

[   36.320510@1] dhd_bus_rxctl: rxcnt_timeout=1

[   36.323854@1] dhd_preinit_ioctls failed -5

[   36.335627@1] dhd_rx_frame: net device is NOT registered yet. drop packet

[   36.337010@1] dhd_rx_frame: net device is NOT registered yet. drop packet

[   36.615458@1] Unknown PRIVATE command BTCOEXSCAN-STOP - ignored

[   36.619701@1] Unknown PRIVATE command RXFILTER-ADD 3 - ignored

[   36.622024@1] Unknown PRIVATE command RXFILTER-START - ignored

[   36.631186@1] Unknown PRIVATE command RXFILTER-STOP - ignored

[   36.642015@1] Unknown PRIVATE command RXFILTER-REMOVE 2 - ignored

[   36.642958@1] Unknown PRIVATE command RXFILTER-START - ignored

[   36.657905@0] wl_iw_set_country: set country for RU as RU rev -1 is OK

[   37.346335@0] nftl release flush cache data: 1

[   37.378786@0] wl_iw_set_wpaauth: 5962: setting wpa_auth to 0xc0

[   37.384106@0] wl_iw_set_essid: join SSID=153 ch=1

[   37.400514@1] nftl release flush cache data: 0

[   37.559528@0] wl_bss_connect_done succeeded

[   37.597242@0] wl_bss_connect_done succeeded

[   39.666259@0] amlogic camera driver: gt2005_v4l2_init.

[   39.750891@0] +++found a init function, and run it..

[   39.836927@1] GT2005_write_regs success in initial GT2005.

[   39.970077@0] +++found a uninit function, and run it..

[   40.140362@0] gc0308_init OK!!!!

[   40.140413@0] +++found a init function, and run it..

[   40.179473@0] GC0308_write_regs success in initial GC0308.

[   40.179629@0] GC0308_write_custom_regs success in initial GC0308.

[   40.294409@0] amlogic camera driver: gc0308_v4l2_uninit.

[   40.310703@0] +++found a uninit function, and run it..

[   42.986047@1] binder: send failed reply for transaction 7940 to 856:993

[   44.585702@0] binder: 1034:1042 refcount change on invalid ref 11

[   47.050195@0] wlan0: no IPv6 routers present

[   50.150283@1] [sd_send_cmd_hw] wait_for_completion_timeout for cmd(52)=IO_RW_DIRECT

[   50.152512@1] sdio_timeout_int_times = 61; timeout = 0

[   50.157649@1] sdio card write_reg failed 30 at addr: 1000e

[   71.620600@0] HOST mode

[   71.919968@1] Using Buffer DMA mode

[   71.919997@1] OTG VER PARAM: 1, OTG VER FLAG: 1

[   71.973583@1] Init: Port Power? op_state=1

[   71.973607@1] Init: Power Port (0)

[   71.975508@1] set usb port power on (board gpio 25)!

[   72.450349@1] Indeed it is in host mode hprt0 = 00021501

[   72.630111@1] usb 1-1: new high speed USB device number 2 using dwc_otg

[   72.632880@1] Indeed it is in host mode hprt0 = 00001101

[   72.862752@0] usb 1-1: New USB device found, idVendor=0b95, idProduct=772b

[   72.864091@0] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[   72.871739@0] usb 1-1: Product: AX88772B

[   72.875286@0] usb 1-1: Manufacturer: ASIX Elec. Corp.

[   72.880379@0] usb 1-1: SerialNumber: 000001

[   73.012070@0] asix 1-1:1.0: eth0: register 'asix' at usb-lm0-1, ASIX AX88772B USB 2.0 Ethernet, 00:60:6e:42:11:84

[   73.019936@0] netlink: 28 bytes leftover after parsing attributes.

[   73.023186@0] netlink: 28 bytes leftover after parsing attributes.

[   73.029294@0] netlink: 28 bytes leftover after parsing attributes.

[   73.036676@0] netlink: 28 bytes leftover after parsing attributes.

[   73.041676@0] netlink: 28 bytes leftover after parsing attributes.

[   73.373189@0] ADDRCONF(NETDEV_UP): eth0: link is not ready

[   75.778880@1] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[   75.799158@1] wl_android_wifi_off in

[   75.799579@1] bcmsdh_set_irq Flag = 0

[   75.799839@1] [extern_wifi_set_enable] in

[   75.799923@1] WIFI  Disable!

[   75.799936@1] =========== WLAN placed in RESET ========

[   76.146638@1] +++dhd_module_cleanup+++

[   76.167133@0] sdio_timeout_int_times = 0; timeout = 498

[   76.167207@0] sdio card read_reg failed 21 at addr: 4

[   76.172361@0] wl_iw_detach thr:187 terminated OK

[   76.176734@0] wl_iw_bt_release thr:18d terminated OK

[   76.181715@0] dhd_detach thr:190 terminated OK

[   76.250422@1] dhd_detach thr:18e terminated OK

[   76.250570@1] dhd_detach thr:18f terminated OK

[   76.253748@1] bcmsdh_unregister_oob_intr: Enter

[   76.259666@1] CFG80211-ERROR) wl_event_handler : wl_event_handler was terminated

[   76.265782@1] wl_destroy_event_handler thr:184 terminated OK

[   76.320573@1] dhd_osl_detach: MEMORY LEAK 856 bytes

[   76.340987@1] sdio_timeout_int_times = 0; timeout = 498

[   76.341066@1] sdio card read_reg failed 21 at addr: 2

[   76.367589@1] sdio_timeout_int_times = 0; timeout = 498

[   76.367610@1] sdio card read_reg failed 21 at addr: 2

[   76.392839@0] sdio_timeout_int_times = 0; timeout = 497

[   76.392913@0] sdio card read_reg failed 21 at addr: 2

[   76.400549@0] [extern_wifi_set_enable] in

[   76.401773@0] WIFI  Disable!

[   76.404695@0] =========== WLAN placed in POWER OFF ========

[   76.410465@0] ---dhd_module_cleanup---

[   86.699912@0] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[   86.754833@0] asix 1-1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1

[   86.779415@0] netlink: 28 bytes leftover after parsing attributes.

[   86.780119@0] netlink: 28 bytes leftover after parsing attributes.

[   86.786473@0] netlink: 28 bytes leftover after parsing attributes.

[   86.793249@0] netlink: 28 bytes leftover after parsing attributes.

[   89.189168@0] netlink: 28 bytes leftover after parsing attributes.

[   89.192042@0] netlink: 28 bytes leftover after parsing attributes.

[   89.211940@0] netlink: 28 bytes leftover after parsing attributes.

[   89.213940@0] netlink: 28 bytes leftover after parsing attributes.

[   89.725519@0] netlink: 28 bytes leftover after parsing attributes.

[   89.726266@0] netlink: 28 bytes leftover after parsing attributes.

[   89.735869@1] netlink: 28 bytes leftover after parsing attributes.

[   89.738916@1] netlink: 28 bytes leftover after parsing attributes.

[   89.760487@1] netlink: 28 bytes leftover after parsing attributes.

[   89.761209@1] netlink: 28 bytes leftover after parsing attributes.

[   89.767959@1] netlink: 28 bytes leftover after parsing attributes.

[   89.776518@1] netlink: 28 bytes leftover after parsing attributes.

[   97.250223@0] eth0: no IPv6 routers present

[  537.060444@1] SDHC card unpluged!

[  537.060518@1]

[  537.060795@1] monitor : REMOVED

[  833.361273@1] netlink: 28 bytes leftover after parsing attributes.

[  833.361946@1] netlink: 28 bytes leftover after parsing attributes.

[  833.368432@1] netlink: 28 bytes leftover after parsing attributes.

[  833.391073@1] netlink: 28 bytes leftover after parsing attributes.

[  833.399798@1] netlink: 28 bytes leftover after parsing attributes.

[  833.400547@1] netlink: 28 bytes leftover after parsing attributes.

[  833.407017@1] netlink: 28 bytes leftover after parsing attributes.

[  833.428034@1] netlink: 28 bytes leftover after parsing attributes.

[  833.437193@1] netlink: 28 bytes leftover after parsing attributes.

[  833.437832@1] netlink: 28 bytes leftover after parsing attributes.

[  833.446573@1] netlink: 28 bytes leftover after parsing attributes.

[  833.454895@1] netlink: 28 bytes leftover after parsing attributes.

[  998.404121@0] netlink: 28 bytes leftover after parsing attributes.

[  998.418150@0] netlink: 28 bytes leftover after parsing attributes.

[  998.424927@0] netlink: 28 bytes leftover after parsing attributes.

[  998.436393@0] netlink: 28 bytes leftover after parsing attributes.

[  998.452939@0] netlink: 28 bytes leftover after parsing attributes.

[  998.453689@0] netlink: 28 bytes leftover after parsing attributes.

[  998.501393@0] netlink: 28 bytes leftover after parsing attributes.

[  998.502115@0] netlink: 28 bytes leftover after parsing attributes.

[  998.508423@0] netlink: 28 bytes leftover after parsing attributes.

[  998.518020@0] netlink: 28 bytes leftover after parsing attributes.

[  998.530007@0] netlink: 28 bytes leftover after parsing attributes.

[  998.530792@1] netlink: 28 bytes leftover after parsing attributes.

[ 1112.299152@0] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected

[ 1112.299213@0]

[ 1112.303362@0] ERROR::dwc_otg_hcd_urb_enqueue:501: Not connected

[ 1112.303410@0]

[ 1112.420436@0] DEVICE mode

[ 1112.420745@0] PortPower off

[ 1112.420935@0] set usb port power off (board gpio 25)!

[ 1112.500866@0] usb 1-1: USB disconnect, device number 2

[ 1112.503000@0] asix 1-1:1.0: eth0: unregister 'asix' usb-lm0-1, ASIX AX88772B USB 2.0 Ethernet

[ 1112.761789@0] Using Buffer DMA mode

[ 1112.761828@0] OTG VER PARAM: 1, OTG VER FLAG: 1

[ 1133.370344@0] sd_mmc_info->card_type=0

[ 1133.370421@0] begin SDIO check ......

[ 1133.394852@0] sdio_timeout_int_times = 0; timeout = 498

[ 1133.417582@0] sdio_timeout_int_times = 0; timeout = 498

[ 1133.417659@0] SEND OP timeout @1

[ 1133.420831@0] begin SD&SDHC check ......

[ 1133.440615@0] set type to SDHC

[ 1133.911052@0] S18A : 0

[ 1133.970467@0] Got RCA = 4660

[ 1133.971211@0]

[ 1133.971214@0] ***********CID*************

[ 1133.973439@0] 02:54:4d:53:41:30:38:47:04:9c:00:00:58:00:a2:00:

[ 1133.979079@0] MID[8]=2

[ 1133.981612@0] OID[16]=TM

[ 1133.984406@0] PNM[40]=SA08G

[ 1133.986941@0] PRV[8]=4

[ 1133.989357@0] PSN[32]=0x5800009c

[ 1133.993123@0] Reserved[4]=0

[ 1133.995271@0] year[8].month[4]=2010.2

[ 1133.998881@0] NotUsed[1]=0

[ 1134.002312@0] CRC[7]=0

[ 1134.002316@0]

[ 1134.006296@0]

[ 1134.006300@0] ********** CSD v2 **************

[ 1134.011657@0] 40:0e:00:32:5b:59:00:00:3b:67:7f:80:0a:40:00:00:

[ 1134.017268@0] CSD_STRUCTURE[2]=1

[ 1134.020876@0] Reserved1[6]=0

[ 1134.023568@0] TAAC[8]=14

[ 1134.026076@0] NSAC[8]=0

[ 1134.028512@0] TRAN_SPEED[8]=50

[ 1134.031783@0] CCC[8+4]=0x5b5

[ 1134.034398@0] READ_BL_LEN[4]=9

[ 1134.037452@0] READ_BL_PARTIAL[1]=0

[ 1134.042712@0] WRITE_BLK_MISALIGN[1]=0

[ 1134.044558@0] READ_BLK_MISALIGN[1]=0

[ 1134.050090@1] DSR_IMP[1]=0

[ 1134.050684@1] Reserved2[4]=0

[ 1134.055757@1] Reserved3[2]=0

[ 1134.056417@1] C_SIZE[6+8+8]=15207

[ 1134.059711@1] Reserved4[1]=0

[ 1134.062896@0] ERASE_BLK_EN[1]=1

[ 1134.065713@0] SECTOR_SIZE[6+1]=127

[ 1134.069099@0] WP_GRP_SIZE[7]=0

[ 1134.072187@0] WP_GRP_ENABLE[1]=0

[ 1134.075350@0] Reserved5[2]=0

[ 1134.078208@0] R2W_FACTOR[3]=2

[ 1134.081186@0] WRITE_BL_LEN[2+2]=9

[ 1134.084458@0] WRITE_BL_PARTIAL[1]=0

[ 1134.087932@0] Reserved6[5]=0

[ 1134.091082@0] FILE_FORMAT_GRP[1]=0

[ 1134.094179@0] COPY[1]=0

[ 1134.096610@0] PERM_WRITE_PROTECT[1]=0

[ 1134.100286@0] TMP_WRITE_PROTECT[1]=0

[ 1134.103826@0] FILE_FORMAT[2]=0

[ 1134.106854@0] Reserved7[2]=0

[ 1134.109716@0] CRC[7]=0

[ 1134.112071@0] NotUsed[1]=0

[ 1134.112074@0]

[ 1134.116804@0] total block nums : 0xeda000(15572992)

[ 1134.122561@0]

[ 1134.122564@0] ***********SCR*************

[ 1134.127365@0] 02:35:80:00:01:00:00:00:

[ 1134.130695@0] SD_SPEC[4]=2

[ 1134.133333@0] SCR_STRUCTURE[4]=0

[ 1134.136542@0] SD_BUS_WIDTHS[4]=5

[ 1134.139750@0] SD_SECURITY[3]=3

[ 1134.142824@0] DATA_STAT_AFTER_ERASE[1]=0

[ 1134.146695@0] Rsv1[7]=0

[ 1134.149123@0] SD_SPEC3[1]=1

[ 1134.152061@0] CMD_SUPPORT[2]=0

[ 1134.154938@0] Rsv2[6]=0

[ 1134.157370@0] Reserved2[32]=1

[ 1134.157372@0]

[ 1134.163898@0] 00648001 80018001 80018001 80030000

[ 1134.166737@0] 01000000 00000000 00000000 00000000

[ 1134.171510@0] 00000000 00000000 00000000 00000000

[ 1134.176287@0] 00000000 00000000 00000000 00000000

[ 1134.181060@0]

[ 1134.181062@0] ****************switch status****************

[ 1134.188710@0] Data_Struction_Verion : 0

[ 1134.192111@0] Max_Current_Consumption : 100

[ 1134.196259@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 1134.201235@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 1134.205287@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 1134.209793@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 1134.214308@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 1134.218824@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 1134.223334@0] Function_Group_Status6 : 0

[ 1134.227241@0] Function_Group_Status5 : 0

[ 1134.231158@0] Function_Group_Status4 : 0

[ 1134.235057@0] Function_Group_Status3 : 0

[ 1134.238962@0] Function_Group_Status2 : 0

[ 1134.243015@0] Function_Group_Status1 : 1

[ 1134.243018@0]

[ 1134.249417@0] 00648001 80018001 80018001 80030000

[ 1134.253190@0] 01000000 00000000 00000000 00000000

[ 1134.257964@0] 00000000 00000000 00000000 00000000

[ 1134.262740@0] 00000000 00000000 00000000 00000000

[ 1134.267512@0]

[ 1134.267515@0] ****************switch status****************

[ 1134.275332@0] Data_Struction_Verion : 0

[ 1134.278545@0] Max_Current_Consumption : 100

[ 1134.282736@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 1134.287219@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 1134.291737@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 1134.296246@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 1134.300923@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 1134.305281@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 1134.310226@0] Function_Group_Status6 : 0

[ 1134.313699@0] Function_Group_Status5 : 0

[ 1134.317605@0] Function_Group_Status4 : 0

[ 1134.321543@0] Function_Group_Status3 : 0

[ 1134.325413@0] Function_Group_Status2 : 0

[ 1134.329321@0] Function_Group_Status1 : 1

[ 1134.329323@0]

[ 1134.337776@1]  cardblksd: cardblksd1

[ 1134.338754@0] monitor : INSERT

[ 1145.421144@1] +++dhd_module_init+++

[ 1145.421194@1] [extern_wifi_set_enable] in

[ 1145.423263@1] WIFI  Disable!

[ 1145.426425@1] [extern_wifi_set_enable] in

[ 1145.430387@1] WIFI  Enable!

[ 1145.433234@1] [extern_wifi_set_enable] in

[ 1145.437686@1] WIFI  Enable!

[ 1145.870339@0] sd_mmc_info->card_type=0

[ 1145.870442@0] begin SDIO check ......

[ 1145.930533@0] Got RCA = 1

[ 1145.931341@0] =========== WLAN placed in POWER ON ========

[ 1145.944192@0] Linux Kernel SDIO/MMC Driver

[ 1145.944426@0] dhd_customer_oob_irq_map: customer specific Host GPIO number is (101)

[ 1145.951338@0] F1 signature read @0x18000000=0x16044330

[ 1146.025794@1] DHD: dongle ram size is set to 294912(orig 294912)

[ 1146.026410@1] dhd_bus_select_firmware_name_by_chip: firmware_path=/system/etc/wifi/40183/fw_bcm40183b2.bin

[ 1146.043376@1] wl_create_event_handler thr:b7a started

[ 1146.048018@0] wl_iw_attach thr:b7b started

[ 1146.049225@0] wl_iw_bt_init thr:b7c started

[ 1146.051878@0] dhd_attach thr:b7d started

[ 1146.061429@1] dhd_attach thr:b7e started

[ 1146.071311@1] dhd_attach thr:b7f started

[ 1146.073388@1] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33

[ 1146.078142@1] [extern_wifi_set_enable] in

[ 1146.089296@1] WIFI  Disable!

[ 1146.089387@1] =========== WLAN placed in RESET ========

[ 1146.093683@1]

[ 1146.093704@1] Dongle Host Driver, version 5.90.195.26.1.6.1

[ 1146.093717@1] Compiled in drivers/net/wireless/bcmdhd on Jan 30 2013 at 18:00:05

[ 1146.106898@1] ---dhd_module_init---

[ 1147.845673@0]  written as a string:/system/etc/wifi/40183/fw_bcm40183b2.bin

[ 1147.984233@1] dhd_bus_select_firmware_name_by_chip: firmware_path=/system/etc/wifi/40183/fw_bcm40183b2.bin

[ 1147.989287@1]

[ 1147.989296@1] Dongle Host Driver, version 5.90.195.26.1.6.1

[ 1147.989300@1] Compiled in drivers/net/wireless/bcmdhd on Jan 30 2013 at 18:00:05

[ 1148.003893@1] wl_android_wifi_on in

[ 1148.003903@1] [extern_wifi_set_enable] in

[ 1148.003934@1] WIFI  Disable!

[ 1148.004138@1] [extern_wifi_set_enable] in

[ 1148.004149@1] WIFI  Enable!

[ 1148.004368@1] [extern_wifi_set_enable] in

[ 1148.004379@1] WIFI  Enable!

[ 1148.440398@0] sd_mmc_info->card_type=0

[ 1148.440483@0] begin SDIO check ......

[ 1148.500671@1] Got RCA = 1

[ 1148.501544@1] =========== WLAN going back to live  ========

[ 1148.523145@1] F1 signature read @0x18000000=0x16044330

[ 1148.604817@0] DHD: dongle ram size is set to 294912(orig 294912)

[ 1148.604922@0] dhd_bus_select_firmware_name_by_chip: firmware_path=/system/etc/wifi/40183/fw_bcm40183b2.bin

[ 1148.656036@0] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.

[ 1148.824136@0] bcmsdh_register_oob_intr Enter

[ 1148.824170@0] bcmsdh_register_oob_intr IRQ=101 Type=411

[ 1148.829562@1] Firmware up: op_mode=1, Broadcom Dongle Host Driver mac=00:22:f4:1d:c2:2b

[ 1148.908857@1] dhd_rx_frame: net device is NOT registered yet. drop packet

[ 1148.910200@1] dhd_rx_frame: net device is NOT registered yet. drop packet

[ 1148.973151@1] Unknown PRIVATE command BTCOEXSCAN-STOP - ignored

[ 1148.976905@1] Unknown PRIVATE command RXFILTER-ADD 3 - ignored

[ 1148.987044@1] Unknown PRIVATE command RXFILTER-START - ignored

[ 1148.987806@1] Unknown PRIVATE command RXFILTER-STOP - ignored

[ 1148.993584@1] Unknown PRIVATE command RXFILTER-REMOVE 2 - ignored

[ 1148.999598@1] Unknown PRIVATE command RXFILTER-START - ignored

[ 1149.011266@1] wl_iw_set_country: set country for RU as RU rev -1 is OK

[ 1149.669086@1] wl_iw_set_wpaauth: 5962: setting wpa_auth to 0xc0

[ 1149.678054@1] wl_iw_set_essid: join SSID=153 ch=1

[ 1149.761474@0] wl_bss_connect_done succeeded

[ 1149.801873@0] wl_bss_connect_done succeeded

[ 1158.970053@0] wlan0: no IPv6 routers present

[ 1481.719768@0] nftl initilize garbage completely: 57

[ 1594.976345@1] nftl initilize garbage completely: 56

[ 1603.492096@1] binder: 3683:3691 refcount change on invalid ref 9

[ 1603.493296@1] binder: 3683:3691 refcount change on invalid ref 13

[ 4375.395197@0] nftl initilize garbage completely: 88

[ 4569.220058@0] === key 116 down ===

[ 4569.360063@0] === key 116 up ===

[ 4569.379986@0] request_suspend_state: sleep (0->3) at 4569379973001 (2013-01-31 11:00:12.119392999 UTC)

[ 4569.383831@0] lcd_suspend

[ 4569.386446@0] m6g02_d7_backlight_power_ctrl() Power OFF

[ 4569.392704@0] m6g02_d7_lcd_power_ctrl() Power OFF

[ 4569.630291@0] m6g02_d7_lvds_ports_ctrl: OFF

[ 4570.180039@0] disable lcd display driver.

[ 4570.180058@0] aml_m1_nand_early suspend entered

[ 4570.180065@0] enter -----> aml_gt2005_early_suspend

[ 4570.180070@0] enter -----> aml_gc0308_early_suspend

[ 4570.210102@0] ==ft5x0x_ts_suspend=

[ 4570.210925@0] net_ratelimit: 3 callbacks suppressed

[ 4570.210945@0] dhd_set_suspend: force extra Suspend setting

[ 4570.223761@1] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=1 Listen=10

[ 4570.224764@1] bcmsdh_sdmmc_early_suspend: enter

[ 4570.224785@1] bcmsdh_sdmmc_early_suspend: enter

[ 4570.258104@0] BT_RADIO going: off

[ 4570.258130@0] BCM_BT: going OFF

[ 4571.230558@1] osd_suspended

[ 4571.230595@1] osd_ext_suspended

[ 4571.230613@1] DWC_OTG: going early suspend! is_mount=0

[ 4571.230634@1] DWC_OTG: going early suspend! is_mount=0

[ 4571.230651@1] sys_suspend

[ 4571.230758@1] early clk HHI_VID_CLK_CNTL(f110417c) off

[ 4571.230778@1] early clk HHI_VIID_CLK_CNTL(f110412c) off

[ 4574.417438@1] PM: Syncing filesystems ... done.

[ 4574.435575@1] Freezing user space processes ... (elapsed 0.04 seconds) done.

[ 4574.481613@1] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

[ 4574.514661@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_suspend

[ 4574.515853@1] suspend memorycard0:sdio:2+ @ 5586, parent: memorycard0:sdio

[ 4574.522756@1] bcmsdh_sdmmc_suspend

[ 4574.526004@1] dhd suspend, remove bcmsdh

[ 4574.527197@1] wl_iw_detach thr:b7b terminated OK

[ 4574.531113@1] wl_iw_bt_release thr:b7c terminated OK

[ 4574.535769@1] dhd_detach thr:b7f terminated OK

[ 4574.540520@1] wl_android_wifi_off in

[ 4574.551556@0] bcmsdh_set_irq Flag = 0

[ 4574.552430@0] [extern_wifi_set_enable] in

[ 4574.554047@0] WIFI  Disable!

[ 4574.556768@0] =========== WLAN placed in RESET ========

[ 4574.681495@0] dhd_detach thr:b7d terminated OK

[ 4574.682269@1] dhd_detach thr:b7e terminated OK

[ 4574.684908@1] bcmsdh_unregister_oob_intr: Enter

[ 4574.690609@1] CFG80211-ERROR) wl_event_handler : wl_event_handler was terminated

[ 4574.697132@1] wl_destroy_event_handler thr:b7a terminated OK

[ 4574.750976@1] dhd_osl_detach: MEMORY LEAK 856 bytes

[ 4574.774119@0] sdio_timeout_int_times = 0; timeout = 498

[ 4574.774435@0] sdio card read_reg failed 21 at addr: 2

[ 4574.802061@0] sdio_timeout_int_times = 0; timeout = 497

[ 4574.802331@0] sdio card read_reg failed 21 at addr: 2

[ 4574.807382@0] suspend memorycard0:sdio:1+ @ 5586, parent: memorycard0:sdio

[ 4574.814636@0] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_suspend

[ 4574.825121@0] suspend 2-1+ @ 2340, parent: usb2

[ 4574.825565@0] option: option_instat_callback: error -2

[ 4574.830449@1] suspend mali_dev.0+ @ 5586, parent: platform

[ 4574.830532@0] option: option_instat_callback: error -2

[ 4574.841418@1] suspend input4+ @ 5586, parent: none

[ 4574.845489@1] suspend input3+ @ 5586, parent: card0

[ 4574.850480@1] suspend soc-audio+ @ 5586, parent: platform

[ 4574.855698@1] enter rt5631_suspend_pre

[ 4574.855785@1] ***Entered sound/soc/aml/aml_dai.c:aml_dai_i2s_suspend

[ 4574.864628@0] enter rt5631_set_bias_level level: 2

[ 4574.865085@0] enter rt5631_set_bias_level level: 2

[ 4574.866309@1] enter rt5631_set_bias_level level: 1

[ 4574.866389@0] enter rt5631_set_bias_level level: 1

[ 4574.869403@1] enter rt5631_suspend_post

[ 4574.869545@1] suspend snd-soc-dummy+ @ 5586, parent: platform

[ 4574.870529@1] suspend boot_monitor+ @ 5586, parent: platform

[ 4574.870961@0] suspend usb1+ @ 6169, parent: lm0

[ 4574.871262@0] suspend usb2+ @ 2340, parent: lm1

[ 4574.885019@1] suspend alarm+ @ 5586, parent: platform

[ 4574.950176@1] audiodsp suspend

[ 4574.950394@1] suspend reg-20-cs-ldoio0+ @ 5586, parent: platform

[ 4574.953770@1] suspend reg-20-cs-buck3+ @ 5586, parent: platform

[ 4574.959670@1] suspend reg-20-cs-buck2+ @ 5586, parent: platform

[ 4574.965692@1] suspend reg-20-cs-ldo4+ @ 5586, parent: platform

[ 4574.971646@1] suspend reg-20-cs-ldo3+ @ 5586, parent: platform

[ 4574.977203@1] suspend reg-20-cs-ldo2+ @ 5586, parent: platform

[ 4574.983208@1] suspend input2+ @ 5586, parent: axp20-supplyer.28

[ 4574.989134@1] suspend input1+ @ 5586, parent: meson-keyinput.0

[ 4574.994878@1] suspend input0+ @ 5586, parent: m1-adckp.0

[ 4575.000877@1] m3 nand suspend entered

[ 4575.131494@1] suspend regulatory.0+ @ 5586, parent: platform

[ 4575.131838@1] suspend amcanvas+ @ 5586, parent: platform

[ 4575.137069@1] suspend axp20-gpio.29+ @ 5586, parent: 2-0034

[ 4575.142844@1] suspend axp20-supplyer.28+ @ 5586, parent: 2-0034

[ 4575.150682@1] suspend axp20-regulator.27+ @ 5586, parent: 2-0034

[ 4575.154468@1] suspend axp20-regulator.26+ @ 5586, parent: 2-0034

[ 4575.160557@1] suspend axp20-regulator.25+ @ 5586, parent: 2-0034

[ 4575.166441@1] suspend axp20-regulator.24+ @ 5586, parent: 2-0034

[ 4575.172521@1] suspend axp20-regulator.23+ @ 5586, parent: 2-0034

[ 4575.178416@1] suspend axp20-regulator.22+ @ 5586, parent: 2-0034

[ 4575.184488@1] suspend axp20-regulator.21+ @ 5586, parent: 2-0034

[ 4575.190502@1] suspend 2-0034+ @ 5586, parent: i2c-2

[ 4575.195265@1] suspend i2c-2+ @ 5586, parent: none

[ 4575.199942@1] suspend 1-001a+ @ 5586, parent: i2c-1

[ 4575.204891@1] suspend 1-0068+ @ 5586, parent: i2c-1

[ 4575.209705@1] suspend i2c-1+ @ 5586, parent: none

[ 4575.214440@1] suspend 0-0038+ @ 5586, parent: i2c-0

[ 4575.219211@1] suspend 0-003c+ @ 5586, parent: i2c-0

[ 4575.224162@1] suspend 0-0021+ @ 5586, parent: i2c-0

[ 4575.228948@1] suspend i2c-0+ @ 5586, parent: none

[ 4575.233765@1] suspend aml-bl+ @ 5586, parent: platform

[ 4575.238739@1] suspend mesonlcd.0+ @ 5586, parent: platform

[ 4575.244298@1] suspend bt-dev+ @ 5586, parent: platform

[ 4575.249330@1] suspend wifi_power+ @ 5586, parent: platform

[ 4575.254998@1] suspend gps_power+ @ 5586, parent: platform

[ 4575.260285@1] suspend aml-modem+ @ 5586, parent: platform

[ 4575.265522@1] do aml_modem_suspend

[ 4575.268992@1] MU509 power_off!

[ 4575.269025@1]  modem_disable for MU509 !

[ 4575.273879@1]

[ 4575.277756@1] suspend simdetect.0+ @ 5586, parent: platform

[ 4575.283545@1] suspend cpufreq-meson+ @ 5586, parent: platform

[ 4575.289179@1] suspend meson-cs-regulator.0+ @ 5586, parent: platform

[ 4575.295606@1] suspend freescale.0+ @ 5586, parent: platform

[ 4575.301147@1] suspend mesonvout2.0+ @ 5586, parent: platform

[ 4575.306703@1] suspend ppmgr.0+ @ 5586, parent: platform

[ 4575.311998@1] suspend aml_rt5631_audio.0+ @ 5586, parent: platform

[ 4575.318079@1] suspend aml-dai.0+ @ 5586, parent: platform

[ 4575.323540@1] suspend aml-audio.0+ @ 5586, parent: platform

[ 4575.329019@1] suspend meson-keyinput.0+ @ 5586, parent: platform

[ 4575.335095@1] suspend m1-adckp.0+ @ 5586, parent: platform

[ 4575.340550@1] suspend saradc.0+ @ 5586, parent: platform

[ 4575.345772@1] suspend aml_rtc+ @ 5586, parent: platform

[ 4575.351095@1] suspend efuse+ @ 5586, parent: platform

[ 4575.356003@1] suspend pm-meson+ @ 5586, parent: platform

[ 4575.361505@1] suspend AMLOGIC_CARD+ @ 5586, parent: platform

[ 4575.366945@1] suspend vm.0+ @ 5586, parent: platform

[ 4575.371992@1] suspend amvdec_656in+ @ 5586, parent: platform

[ 4575.377533@1] suspend vdin+ @ 5586, parent: platform

[ 4575.382565@1] suspend aml_nand.0+ @ 5586, parent: platform

[ 4575.387947@1] suspend mesonstream.0+ @ 5586, parent: platform

[ 4575.393761@1] suspend mesonvout.0+ @ 5586, parent: platform

[ 4575.399245@1] suspend mesonfb-ext.0+ @ 5586, parent: platform

[ 4575.405317@1] suspend mesonfb.0+ @ 5586, parent: platform

[ 4575.410397@1] suspend mesonuart+ @ 5586, parent: platform

[ 4575.415706@1] suspend aml-i2c.2+ @ 5586, parent: platform

[ 4575.421146@1] suspend aml-i2c.1+ @ 5586, parent: platform

[ 4575.426466@1] suspend aml-i2c.0+ @ 5586, parent: platform

[ 4575.431936@1] suspend reg-dummy+ @ 5586, parent: platform

[ 4575.437231@1] suspend power.0+ @ 5586, parent: platform

[ 4575.442497@1] suspend amhdmitx.0+ @ 5586, parent: platform

[ 4575.448096@1] PM: suspend of devices complete after 933.737 msecs

[ 4575.454025@1] enter meson_pm_prepare!

[ 4575.461603@1] PM: late suspend of devices complete after 3.967 msecs

[ 4575.463947@1] Disabling non-boot CPUs ...

[ 4575.469396@1] IRQ61 no longer affine to CPU1

[ 4575.470036@1] Disable timerD

[ 4575.470897@0] CPU1: shutdown

[ 4575.481607@0] Disable timerB

[ 4575.481731@0] Disable timerA

[ 4575.483662@0] MMC_LP_CTRL1 before=0x78000030

[ 4575.487901@0] MMC_LP_CTRL1 after=0x60a80000

[ 4575.490070@0] cpufreq suspend sleep_freq=144Mhz max=1320MHz

[ 4575.490070@0] enter meson_pm_suspend!

[ 4575.490070@0] ** enable watchdog

[ 4575.490070@0] target ddr clock 0x8001082b!

[ 4575.490070@0] analog off

[ 4575.490070@0] SAR_ADC(0xf110868c):0xc3a8500a & ~0x40200000 | 0x10000000 = 0x9388500a

[ 4575.490070@0] LED_PWM_REG0(0xf1108768):0x63100f & ~0x1000 | 0x2000 = 0x63100f

[ 4575.490070@0] clk HHI_AUD_CLK_CNTL(f1104178) off

[ 4575.490070@0] clk HHI_HDMI_CLK_CNTL(f11041cc) off

[ 4575.490070@0] clk HHI_MPEG_CLK_CNTL(f1104174) off

[ 4575.490070@0] clk HHI_VDEC_CLK_CNTL(f11041b4) off

[ 4575.490070@0] sleep ...

[ 4575.490070@0] initial appf

[ 4575.490070@0] ** disable watchdog

[ 4575.490070@0] power down cpu --

[ 4575.490070@0] ** enable watchdog

[ 4575.490070@0] ... wake up

[ 4575.490070@0] RTCADD3=0x23600000

[ 4575.490070@0] RTCADD3=0x3600000

[ 4575.490070@0] clk HHI_VDEC_CLK_CNTL(f11041b4) on

[ 4575.490070@0] clk HHI_MPEG_CLK_CNTL(f1104174) on

[ 4575.490070@0] clk HHI_HDMI_CLK_CNTL(f11041cc) on

[ 4575.490070@0] clk HHI_AUD_CLK_CNTL(f1104178) on

[ 4575.490070@0] analog on

[ 4575.490070@0] cpufreq resume sleep_freq=144Mhz

[ 4575.490070@0] MMC_LP_CTRL1 before=0x60a80000

[ 4575.490070@0] MMC_LP_CTRL1 after=0x78000030

[ 4575.490070@0] Resume timerA

[ 4575.490070@0] Resume timerB

[ 4575.490070@0] Enabling non-boot CPUs ...

[ 4575.470043@1] CPU1: Booted secondary processor

[ 4575.470043@1] MESON TIMER-D c09630c0

[ 4575.514574@1] Disable timerD

[ 4575.514574@1] CPU1: Unknown IPI message 0x0

[ 4575.523813@1] Switched to NOHz mode on CPU #1

[ 4575.529254@0] CPU1 is up

[ 4575.534707@0] PM: early resume of devices complete after 3.680 msecs

[ 4575.537550@0] enter meson_pm_finish!

[ 4575.542758@0] resume amhdmitx.0+ @ 5586, parent: platform

[ 4575.546020@0] resume power.0+ @ 5586, parent: platform

[ 4575.551354@0] resume reg-dummy+ @ 5586, parent: platform

[ 4575.556462@0] resume aml-i2c.0+ @ 5586, parent: platform

[ 4575.562137@1] resume aml-i2c.1+ @ 5586, parent: platform

[ 4575.566970@1] resume aml-i2c.2+ @ 5586, parent: platform

[ 4575.572256@1] resume mesonuart+ @ 5586, parent: platform

[ 4575.577443@1] resume mesonfb.0+ @ 5586, parent: platform

[ 4575.582804@1] resume mesonfb-ext.0+ @ 5586, parent: platform

[ 4575.588382@1] resume mesonvout.0+ @ 5586, parent: platform

[ 4575.594021@1] resume mesonstream.0+ @ 5586, parent: platform

[ 4575.599490@1] resume aml_nand.0+ @ 5586, parent: platform

[ 4575.605278@1] resume vdin+ @ 5586, parent: platform

[ 4575.609745@1] resume amvdec_656in+ @ 5586, parent: platform

[ 4575.615385@1] resume vm.0+ @ 5586, parent: platform

[ 4575.620279@1] resume AMLOGIC_CARD+ @ 5586, parent: platform

[ 4575.625713@1] resume pm-meson+ @ 5586, parent: platform

[ 4575.631136@1] resume efuse+ @ 5586, parent: platform

[ 4575.635873@1] resume aml_rtc+ @ 5586, parent: platform

[ 4575.641088@1] resume saradc.0+ @ 5586, parent: platform

[ 4575.646201@1] resume m1-adckp.0+ @ 5586, parent: platform

[ 4575.651673@1] resume meson-keyinput.0+ @ 5586, parent: platform

[ 4575.657471@1] key_input resume by alarm event, reg: 12345678

[ 4575.663211@1] resume aml-audio.0+ @ 5586, parent: platform

[ 4575.668592@1] resume aml-dai.0+ @ 5586, parent: platform

[ 4575.673976@1] resume aml_rt5631_audio.0+ @ 5586, parent: platform

[ 4575.679964@1] resume ppmgr.0+ @ 5586, parent: platform

[ 4575.685165@1] resume mesonvout2.0+ @ 5586, parent: platform

[ 4575.690723@1] resume freescale.0+ @ 5586, parent: platform

[ 4575.696111@1] resume meson-cs-regulator.0+ @ 5586, parent: platform

[ 4575.702439@1] resume cpufreq-meson+ @ 5586, parent: platform

[ 4575.708004@1] resume simdetect.0+ @ 5586, parent: platform

[ 4575.713548@1] resume aml-modem+ @ 5586, parent: platform

[ 4575.718742@1] do aml_modem_resume on ON state

[ 4575.723154@1] MU509 power_on!

[ 4575.723191@1]  modem_enable for MU509 !

[ 4575.778072@1]

[ 4576.481337@1] resume gps_power+ @ 5586, parent: platform

[ 4576.481614@1] resume wifi_power+ @ 5586, parent: platform

[ 4576.486735@1] resume bt-dev+ @ 5586, parent: platform

[ 4576.491860@1] resume mesonlcd.0+ @ 5586, parent: platform

[ 4576.497149@1] resume aml-bl+ @ 5586, parent: platform

[ 4576.502372@0] resume usb1+ @ 6170, parent: lm0

[ 4576.502454@1] resume usb2+ @ 6177, parent: lm1

[ 4576.502606@1] resume i2c-0+ @ 5586, parent: none

[ 4576.502691@1] resume 0-0021+ @ 5586, parent: i2c-0

[ 4576.502776@1] resume 0-003c+ @ 5586, parent: i2c-0

[ 4576.502857@1] resume 0-0038+ @ 5586, parent: i2c-0

[ 4576.502934@1] resume i2c-1+ @ 5586, parent: none

[ 4576.503008@1] resume 1-0068+ @ 5586, parent: i2c-1

[ 4576.503122@1] resume 1-001a+ @ 5586, parent: i2c-1

[ 4576.503197@1] resume i2c-2+ @ 5586, parent: none

[ 4576.503269@1] resume 2-0034+ @ 5586, parent: i2c-2

[ 4576.503346@1] resume axp20-regulator.21+ @ 5586, parent: 2-0034

[ 4576.503425@1] resume axp20-regulator.22+ @ 5586, parent: 2-0034

[ 4576.503501@1] resume axp20-regulator.23+ @ 5586, parent: 2-0034

[ 4576.503579@1] resume axp20-regulator.24+ @ 5586, parent: 2-0034

[ 4576.503655@1] resume axp20-regulator.25+ @ 5586, parent: 2-0034

[ 4576.503731@1] resume axp20-regulator.26+ @ 5586, parent: 2-0034

[ 4576.503807@1] resume axp20-regulator.27+ @ 5586, parent: 2-0034

[ 4576.503883@1] resume axp20-supplyer.28+ @ 5586, parent: 2-0034

[ 4576.505320@1] resume axp20-gpio.29+ @ 5586, parent: 2-0034

[ 4576.505439@1] resume amcanvas+ @ 5586, parent: platform

[ 4576.505537@1] resume regulatory.0+ @ 5586, parent: platform

[ 4576.512068@1] m3 nand resume entered

[ 4576.512542@1] resume input0+ @ 5586, parent: m1-adckp.0

[ 4576.512855@1] wakeup wake lock: event0-182

[ 4576.513299@1] resume input1+ @ 5586, parent: meson-keyinput.0

[ 4576.513710@1] resume input2+ @ 5586, parent: axp20-supplyer.28

[ 4576.514043@1] resume reg-20-cs-ldo2+ @ 5586, parent: platform

[ 4576.514136@1] resume reg-20-cs-ldo3+ @ 5586, parent: platform

[ 4576.514216@1] resume reg-20-cs-ldo4+ @ 5586, parent: platform

[ 4576.514296@1] resume reg-20-cs-buck2+ @ 5586, parent: platform

[ 4576.514373@1] resume reg-20-cs-buck3+ @ 5586, parent: platform

[ 4576.514449@1] resume reg-20-cs-ldoio0+ @ 5586, parent: platform

[ 4576.514515@1] audiodsp resumed

[ 4576.679068@1] resume alarm+ @ 5586, parent: platform

[ 4576.685142@1] resume boot_monitor+ @ 5586, parent: platform

[ 4576.685898@0] reset gpo !

[ 4576.790458@1] resume 2-1+ @ 6181, parent: usb2

[ 4576.790719@0] resume snd-soc-dummy+ @ 5586, parent: platform

[ 4576.796133@0] resume soc-audio+ @ 5586, parent: platform

[ 4576.801016@0] enter rt5631_resume_pre

[ 4576.801488@0] resume input3+ @ 5586, parent: card0

[ 4576.805176@0] resume input4+ @ 5586, parent: none

[ 4576.810588@0] resume mali_dev.0+ @ 5586, parent: platform

[ 4576.815349@0] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_resume

[ 4576.822068@0] resume memorycard0:sdio:1+ @ 5586, parent: memorycard0:sdio

[ 4576.828383@0] bcmsdh_sdmmc_resume

[ 4576.831837@0] resume memorycard0:sdio:2+ @ 5586, parent: memorycard0:sdio

[ 4576.838441@0] bcmsdh_sdmmc_resume

[ 4576.841833@0] dhd resume, late probe bcmsdh

[ 4576.841924@0] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_resume

[ 4576.848391@0] PM: resume of devices complete after 1307.600 msecs

[ 4576.860021@0] Restarting tasks ...

[ 4576.861119@1] usb 2-1: USB disconnect, device number 3

[ 4576.937994@0] enter rt5631_set_bias_level level: 2

[ 4576.949574@0] enter rt5631_set_bias_level level: 2

[ 4576.953999@0] done.

[ 4576.955984@0] enter rt5631_set_bias_level level: 3

[ 4576.961304@1] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0

[ 4576.970017@1] option 2-1:1.0: device disconnected

[ 4576.991620@1] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1

[ 4576.997963@1] option 2-1:1.1: device disconnected

[ 4577.006430@0] mali_meson_poweron: Interrupt received.

[ 4577.060771@0] enter rt5631_set_bias_level level: 3

[ 4577.063656@0] ***Entered sound/soc/aml/aml_dai.c:aml_dai_i2s_resume

[ 4577.064564@0] enter rt5631_resume_post

[ 4577.065018@0] rt5631 hp unpluged

[ 4577.104223@1] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2

[ 4577.135032@0] ** disable watchdog

[ 4577.135246@1] option 2-1:1.2: device disconnected

[ 4577.137609@0] suspend: exit suspend, ret = 0 (2013-01-31 11:45:00.255933999 UTC)

[ 4577.161748@1] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3

[ 4577.164262@0] active wake lock PowerManagerService

[ 4577.164321@0] active wake lock radio-interface

[ 4577.164364@0] active wake lock alarm, time left 451

[ 4577.164404@0] active wake lock unknown_wakeups, time left 500

[ 4577.275564@0] sd_mmc_info->card_type=0

[ 4577.275812@0] begin SDIO check ......

[ 4577.289481@1] option 2-1:1.3: device disconnected

[ 4577.303718@0] sdio_timeout_int_times = 0; timeout = 497

[ 4577.324474@1] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4

[ 4577.326808@0] sdio_timeout_int_times = 0; timeout = 498

[ 4577.326848@0] SEND OP timeout @1

[ 4577.327147@0] begin SD&SDHC check ......

[ 4577.342394@0] set type to SDHC

[ 4577.392180@1] option 2-1:1.4: device disconnected

[ 4577.751222@1] S18A : 0

[ 4577.810687@1] Got RCA = 4660

[ 4577.812565@1]

[ 4577.812587@1] ***********CID*************

[ 4577.813685@1] 02:54:4d:53:41:30:38:47:04:9c:00:00:58:00:a2:00:

[ 4577.819355@1] MID[8]=2

[ 4577.821943@1] OID[16]=TM

[ 4577.824359@1] PNM[40]=SA08G

[ 4577.827135@1] PRV[8]=4

[ 4577.829478@1] PSN[32]=0x5800009c

[ 4577.840203@1] Reserved[4]=0

[ 4577.840304@1] year[8].month[4]=2010.2

[ 4577.841127@1] NotUsed[1]=0

[ 4577.844022@1] CRC[7]=0

[ 4577.844036@1]

[ 4577.848641@1]

[ 4577.848665@1] ********** CSD v2 **************

[ 4577.859045@1] 40:0e:00:32:5b:59:00:00:3b:67:7f:80:0a:40:00:00:

[ 4577.862991@1] CSD_STRUCTURE[2]=1

[ 4577.863071@1] Reserved1[6]=0

[ 4577.865778@1] TAAC[8]=14

[ 4577.868294@1] NSAC[8]=0

[ 4577.877127@1] TRAN_SPEED[8]=50

[ 4577.877227@1] CCC[8+4]=0x5b5

[ 4577.877522@1] READ_BL_LEN[4]=9

[ 4577.880624@1] READ_BL_PARTIAL[1]=0

[ 4577.883947@1] WRITE_BLK_MISALIGN[1]=0

[ 4577.887590@1] READ_BLK_MISALIGN[1]=0

[ 4577.891820@1] DSR_IMP[1]=0

[ 4577.908651@1] Reserved2[4]=0

[ 4577.908802@1] Reserved3[2]=0

[ 4577.908867@1] C_SIZE[6+8+8]=15207

[ 4577.925443@1] Reserved4[1]=0

[ 4577.925520@1] ERASE_BLK_EN[1]=1

[ 4577.925920@1] SECTOR_SIZE[6+1]=127

[ 4577.929305@1] WP_GRP_SIZE[7]=0

[ 4577.950593@1] WP_GRP_ENABLE[1]=0

[ 4577.950680@1] Reserved5[2]=0

[ 4577.951153@1] R2W_FACTOR[3]=2

[ 4577.954104@1] WRITE_BL_LEN[2+2]=9

[ 4577.957403@1] WRITE_BL_PARTIAL[1]=0

[ 4577.970200@1] Reserved6[5]=0

[ 4577.970262@1] FILE_FORMAT_GRP[1]=0

[ 4577.970941@1] COPY[1]=0

[ 4577.973370@1] PERM_WRITE_PROTECT[1]=0

[ 4577.977054@1] TMP_WRITE_PROTECT[1]=0

[ 4577.990108@1] FILE_FORMAT[2]=0

[ 4577.990187@1] Reserved7[2]=0

[ 4577.990499@1] CRC[7]=0

[ 4577.992843@1] NotUsed[1]=0

[ 4577.992852@1]

[ 4578.020172@1] total block nums : 0xeda000(15572992)

[ 4578.021579@1]

[ 4578.021591@1] ***********SCR*************

[ 4578.025661@1] 02:35:80:00:01:00:00:00:

[ 4578.028719@1] SD_SPEC[4]=2

[ 4578.031674@1] SCR_STRUCTURE[4]=0

[ 4578.034799@1] SD_BUS_WIDTHS[4]=5

[ 4578.038008@1] SD_SECURITY[3]=3

[ 4578.041106@1] DATA_STAT_AFTER_ERASE[1]=0

[ 4578.044952@1] Rsv1[7]=0

[ 4578.047399@1] SD_SPEC3[1]=1

[ 4578.050186@1] CMD_SUPPORT[2]=0

[ 4578.053197@1] Rsv2[6]=0

[ 4578.055651@1] Reserved2[32]=1

[ 4578.055665@1]

[ 4578.064850@1] 00648001 80018001 80018001 80030000

[ 4578.065014@1] 01000000 00000000 00000000 00000000

[ 4578.075692@1] 00000000 00000000 00000000 00000000

[ 4578.077915@1] 00000000 00000000 00000000 00000000

[ 4578.083313@1]

[ 4578.083328@1] ****************switch status****************

[ 4578.091207@1] Data_Struction_Verion : 0

[ 4578.093717@1] Max_Current_Consumption : 100

[ 4578.098067@1] Support[0] : 0x8001	Busy[0] : 0x0

[ 4578.102396@1] Support[1] : 0x8001	Busy[1] : 0x0

[ 4578.106912@1] Support[2] : 0x8001	Busy[2] : 0x0

[ 4578.111426@1] Support[3] : 0x8001	Busy[3] : 0x0

[ 4578.115936@1] Support[4] : 0x8001	Busy[4] : 0x0

[ 4578.120488@1] Support[5] : 0x8003	Busy[5] : 0x0

[ 4578.125379@1] Function_Group_Status6 : 0

[ 4578.128869@1] Function_Group_Status5 : 0

[ 4578.132935@1] Function_Group_Status4 : 0

[ 4578.136688@1] Function_Group_Status3 : 0

[ 4578.140618@1] Function_Group_Status2 : 0

[ 4578.144492@1] Function_Group_Status1 : 1

[ 4578.144500@1]

[ 4578.151138@0] 00648001 80018001 80018001 80030000

[ 4578.154819@0] 01000000 00000000 00000000 00000000

[ 4578.159593@0] 00000000 00000000 00000000 00000000

[ 4578.164367@0] 00000000 00000000 00000000 00000000

[ 4578.169144@0]

[ 4578.169150@0] ****************switch status****************

[ 4578.176406@0] Data_Struction_Verion : 0

[ 4578.180197@0] Max_Current_Consumption : 100

[ 4578.184334@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 4578.188848@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 4578.193361@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 4578.197873@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 4578.202387@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 4578.206912@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 4578.211415@0] Function_Group_Status6 : 0

[ 4578.215320@0] Function_Group_Status5 : 0

[ 4578.219226@0] Function_Group_Status4 : 0

[ 4578.223326@0] Function_Group_Status3 : 0

[ 4578.227039@0] Function_Group_Status2 : 0

[ 4578.230981@0] Function_Group_Status1 : 1

[ 4578.230990@0]

[ 4578.236527@0] monitor : resume

[ 4579.410140@0] Indeed it is in host mode hprt0 = 00021501

[ 4579.590102@0] usb 2-1: new high speed USB device number 4 using dwc_otg

[ 4579.591739@0] Indeed it is in host mode hprt0 = 00001101

[ 4579.794235@0] usb 2-1: New USB device found, idVendor=19f5, idProduct=9013

[ 4579.795655@0] usb 2-1: New USB device strings: Mfr=4, Product=3, SerialNumber=0

[ 4579.803356@0] usb 2-1: Product: Qualcomm CDMA Technologies MSM

[ 4579.808767@0] usb 2-1: Manufacturer: Qualcomm, Incorporated

[ 4579.842988@0] option 2-1:1.0: GSM modem (1-port) converter detected

[ 4579.847970@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0

[ 4579.864342@0] option 2-1:1.1: GSM modem (1-port) converter detected

[ 4579.875727@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1

[ 4579.955357@0] option 2-1:1.2: GSM modem (1-port) converter detected

[ 4579.970839@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2

[ 4579.980961@1] option 2-1:1.3: GSM modem (1-port) converter detected

[ 4579.997164@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3

[ 4580.007464@1] option 2-1:1.4: GSM modem (1-port) converter detected

[ 4580.022936@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB4

[ 4582.192258@0] PM: Syncing filesystems ... done.

[ 4582.198031@0] Freezing user space processes ... (elapsed 0.02 seconds) done.

[ 4582.220420@0] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

[ 4582.244462@1] suspend 2-1+ @ 5586, parent: usb2

[ 4582.244587@1] option: option_instat_callback: error -2

[ 4582.248594@1] option: option_instat_callback: error -2

[ 4582.253834@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_suspend

[ 4582.260323@1] suspend memorycard0:sdio:2+ @ 6189, parent: memorycard0:sdio

[ 4582.267062@1] bcmsdh_sdmmc_suspend

[ 4582.270485@1] suspend memorycard0:sdio:1+ @ 6189, parent: memorycard0:sdio

[ 4582.277312@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_suspend

[ 4582.283850@1] suspend mali_dev.0+ @ 6189, parent: platform

[ 4582.289431@1] suspend input4+ @ 6189, parent: none

[ 4582.294103@1] suspend input3+ @ 6189, parent: card0

[ 4582.298945@1] suspend soc-audio+ @ 6189, parent: platform

[ 4582.304610@1] enter rt5631_suspend_pre

[ 4582.304646@1] ***Entered sound/soc/aml/aml_dai.c:aml_dai_i2s_suspend

[ 4582.311572@1] enter rt5631_set_bias_level level: 2

[ 4582.311843@1] enter rt5631_set_bias_level level: 2

[ 4582.312536@1] enter rt5631_set_bias_level level: 1

[ 4582.312600@1] enter rt5631_set_bias_level level: 1

[ 4582.313983@1] enter rt5631_suspend_post

[ 4582.314034@1] suspend snd-soc-dummy+ @ 6189, parent: platform

[ 4582.316609@1] suspend usb2+ @ 5586, parent: lm1

[ 4582.321101@1] suspend boot_monitor+ @ 6189, parent: platform

[ 4582.326555@1] suspend alarm+ @ 6189, parent: platform

[ 4582.331687@0] suspend usb1+ @ 6188, parent: lm0

[ 4582.390083@1] audiodsp suspend

[ 4582.390170@1] suspend reg-20-cs-ldoio0+ @ 6189, parent: platform

[ 4582.393605@1] suspend reg-20-cs-buck3+ @ 6189, parent: platform

[ 4582.399507@1] suspend reg-20-cs-buck2+ @ 6189, parent: platform

[ 4582.405448@1] suspend reg-20-cs-ldo4+ @ 6189, parent: platform

[ 4582.411257@1] suspend reg-20-cs-ldo3+ @ 6189, parent: platform

[ 4582.417038@1] suspend reg-20-cs-ldo2+ @ 6189, parent: platform

[ 4582.422917@1] suspend input2+ @ 6189, parent: axp20-supplyer.28

[ 4582.428836@1] suspend input1+ @ 6189, parent: meson-keyinput.0

[ 4582.434668@1] suspend input0+ @ 6189, parent: m1-adckp.0

[ 4582.440178@1] m3 nand suspend entered

[ 4582.571331@1] suspend regulatory.0+ @ 6189, parent: platform

[ 4582.571677@1] suspend amcanvas+ @ 6189, parent: platform

[ 4582.576918@1] suspend axp20-gpio.29+ @ 6189, parent: 2-0034

[ 4582.582554@1] suspend axp20-supplyer.28+ @ 6189, parent: 2-0034

[ 4582.590763@1] suspend axp20-regulator.27+ @ 6189, parent: 2-0034

[ 4582.594311@1] suspend axp20-regulator.26+ @ 6189, parent: 2-0034

[ 4582.600413@1] suspend axp20-regulator.25+ @ 6189, parent: 2-0034

[ 4582.606289@1] suspend axp20-regulator.24+ @ 6189, parent: 2-0034

[ 4582.612367@1] suspend axp20-regulator.23+ @ 6189, parent: 2-0034

[ 4582.618260@1] suspend axp20-regulator.22+ @ 6189, parent: 2-0034

[ 4582.624334@1] suspend axp20-regulator.21+ @ 6189, parent: 2-0034

[ 4582.630346@1] suspend 2-0034+ @ 6189, parent: i2c-2

[ 4582.635113@1] suspend i2c-2+ @ 6189, parent: none

[ 4582.639784@1] suspend 1-001a+ @ 6189, parent: i2c-1

[ 4582.644734@1] suspend 1-0068+ @ 6189, parent: i2c-1

[ 4582.649549@1] suspend i2c-1+ @ 6189, parent: none

[ 4582.654279@1] suspend 0-0038+ @ 6189, parent: i2c-0

[ 4582.659058@1] suspend 0-003c+ @ 6189, parent: i2c-0

[ 4582.664003@1] suspend 0-0021+ @ 6189, parent: i2c-0

[ 4582.668798@1] suspend i2c-0+ @ 6189, parent: none

[ 4582.673612@1] suspend aml-bl+ @ 6189, parent: platform

[ 4582.678586@1] suspend mesonlcd.0+ @ 6189, parent: platform

[ 4582.684276@1] suspend bt-dev+ @ 6189, parent: platform

[ 4582.689182@1] suspend wifi_power+ @ 6189, parent: platform

[ 4582.694746@1] suspend gps_power+ @ 6189, parent: platform

[ 4582.700028@1] suspend aml-modem+ @ 6189, parent: platform

[ 4582.705452@1] do aml_modem_suspend

[ 4582.708840@1] MU509 power_off!

[ 4582.708873@1]  modem_disable for MU509 !

[ 4582.713714@1]

[ 4582.717608@1] suspend simdetect.0+ @ 6189, parent: platform

[ 4582.723379@1] suspend cpufreq-meson+ @ 6189, parent: platform

[ 4582.729023@1] suspend meson-cs-regulator.0+ @ 6189, parent: platform

[ 4582.735434@1] suspend freescale.0+ @ 6189, parent: platform

[ 4582.740989@1] suspend mesonvout2.0+ @ 6189, parent: platform

[ 4582.746549@1] suspend ppmgr.0+ @ 6189, parent: platform

[ 4582.751842@1] suspend aml_rt5631_audio.0+ @ 6189, parent: platform

[ 4582.757921@1] suspend aml-dai.0+ @ 6189, parent: platform

[ 4582.763383@1] suspend aml-audio.0+ @ 6189, parent: platform

[ 4582.768861@1] suspend meson-keyinput.0+ @ 6189, parent: platform

[ 4582.774937@1] suspend m1-adckp.0+ @ 6189, parent: platform

[ 4582.780395@1] suspend saradc.0+ @ 6189, parent: platform

[ 4582.785611@1] suspend aml_rtc+ @ 6189, parent: platform

[ 4582.791044@1] suspend efuse+ @ 6189, parent: platform

[ 4582.795854@1] suspend pm-meson+ @ 6189, parent: platform

[ 4582.801256@1] suspend AMLOGIC_CARD+ @ 6189, parent: platform

[ 4582.806788@1] suspend vm.0+ @ 6189, parent: platform

[ 4582.811827@1] suspend amvdec_656in+ @ 6189, parent: platform

[ 4582.817376@1] suspend vdin+ @ 6189, parent: platform

[ 4582.822407@1] suspend aml_nand.0+ @ 6189, parent: platform

[ 4582.827796@1] suspend mesonstream.0+ @ 6189, parent: platform

[ 4582.833603@1] suspend mesonvout.0+ @ 6189, parent: platform

[ 4582.839091@1] suspend mesonfb-ext.0+ @ 6189, parent: platform

[ 4582.844901@1] suspend mesonfb.0+ @ 6189, parent: platform

[ 4582.850294@1] suspend mesonuart+ @ 6189, parent: platform

[ 4582.855573@1] suspend aml-i2c.2+ @ 6189, parent: platform

[ 4582.861051@1] suspend aml-i2c.1+ @ 6189, parent: platform

[ 4582.866329@1] suspend aml-i2c.0+ @ 6189, parent: platform

[ 4582.871835@1] suspend reg-dummy+ @ 6189, parent: platform

[ 4582.877093@1] suspend power.0+ @ 6189, parent: platform

[ 4582.882386@1] suspend amhdmitx.0+ @ 6189, parent: platform

[ 4582.888049@1] PM: suspend of devices complete after 644.238 msecs

[ 4582.893897@1] enter meson_pm_prepare!

[ 4582.903296@1] PM: late suspend of devices complete after 5.785 msecs

[ 4582.904182@1] Disabling non-boot CPUs ...

[ 4582.920822@1] IRQ61 no longer affine to CPU1

[ 4582.921780@1] Disable timerD

[ 4582.922672@0] CPU1: shutdown

[ 4582.932627@0] Disable timerB

[ 4582.932810@0] Disable timerA

[ 4582.932979@0] MMC_LP_CTRL1 before=0x78000030

[ 4582.937170@0] MMC_LP_CTRL1 after=0x60a80000

[ 4582.940099@0] cpufreq suspend sleep_freq=96Mhz max=1320MHz

[ 4582.940099@0] enter meson_pm_suspend!

[ 4582.940099@0] ** enable watchdog

[ 4582.940099@0] target ddr clock 0x8001082b!

[ 4582.940099@0] analog off

[ 4582.940099@0] SAR_ADC(0xf110868c):0xc3a8500a & ~0x40200000 | 0x10000000 = 0x9388500a

[ 4582.940099@0] LED_PWM_REG0(0xf1108768):0x63100f & ~0x1000 | 0x2000 = 0x63100f

[ 4582.940099@0] clk HHI_AUD_CLK_CNTL(f1104178) off

[ 4582.940099@0] clk HHI_HDMI_CLK_CNTL(f11041cc) off

[ 4582.940099@0] clk HHI_MPEG_CLK_CNTL(f1104174) off

[ 4582.940099@0] clk HHI_VDEC_CLK_CNTL(f11041b4) off

[ 4582.940099@0] sleep ...

[ 4582.940099@0] ** disable watchdog

[ 4582.940099@0] power down cpu --

[ 4582.940099@0] ** enable watchdog

[ 4582.940099@0] ... wake up

[ 4582.940099@0] RTCADD3=0x23600000

[ 4582.940099@0] RTCADD3=0x3600000

[ 4582.940099@0] clk HHI_VDEC_CLK_CNTL(f11041b4) on

[ 4582.940099@0] clk HHI_MPEG_CLK_CNTL(f1104174) on

[ 4582.940099@0] clk HHI_HDMI_CLK_CNTL(f11041cc) on

[ 4582.940099@0] clk HHI_AUD_CLK_CNTL(f1104178) on

[ 4582.940099@0] analog on

[ 4582.940099@0] cpufreq resume sleep_freq=96Mhz

[ 4582.940099@0] MMC_LP_CTRL1 before=0x60a80000

[ 4582.940099@0] MMC_LP_CTRL1 after=0x78000030

[ 4582.940099@0] Resume timerA

[ 4582.940099@0] Resume timerB

[ 4582.940099@0] Enabling non-boot CPUs ...

[ 4582.930054@1] CPU1: Booted secondary processor

[ 4582.930054@1] MESON TIMER-D c09630c0

[ 4582.967190@1] Disable timerD

[ 4582.967190@1] CPU1: Unknown IPI message 0x0

[ 4582.977669@0] CPU1 is up

[ 4582.980167@1] Switched to NOHz mode on CPU #1

[ 4582.984500@0] PM: early resume of devices complete after 5.747 msecs

[ 4582.990766@0] enter meson_pm_finish!

[ 4582.996034@0] resume amhdmitx.0+ @ 6189, parent: platform

[ 4582.998471@0] resume power.0+ @ 6189, parent: platform

[ 4583.003996@1] resume reg-dummy+ @ 6189, parent: platform

[ 4583.008768@1] resume aml-i2c.0+ @ 6189, parent: platform

[ 4583.014178@1] resume aml-i2c.1+ @ 6189, parent: platform

[ 4583.019341@1] resume aml-i2c.2+ @ 6189, parent: platform

[ 4583.025002@1] resume mesonuart+ @ 6189, parent: platform

[ 4583.029925@1] resume mesonfb.0+ @ 6189, parent: platform

[ 4583.035332@1] resume mesonfb-ext.0+ @ 6189, parent: platform

[ 4583.041070@1] resume mesonvout.0+ @ 6189, parent: platform

[ 4583.046337@1] resume mesonstream.0+ @ 6189, parent: platform

[ 4583.052073@1] resume aml_nand.0+ @ 6189, parent: platform

[ 4583.057352@1] resume vdin+ @ 6189, parent: platform

[ 4583.062450@1] resume amvdec_656in+ @ 6189, parent: platform

[ 4583.067769@1] resume vm.0+ @ 6189, parent: platform

[ 4583.072828@1] resume AMLOGIC_CARD+ @ 6189, parent: platform

[ 4583.078186@1] resume pm-meson+ @ 6189, parent: platform

[ 4583.083489@1] resume efuse+ @ 6189, parent: platform

[ 4583.088340@1] resume aml_rtc+ @ 6189, parent: platform

[ 4583.093645@1] resume saradc.0+ @ 6189, parent: platform

[ 4583.098674@1] resume m1-adckp.0+ @ 6189, parent: platform

[ 4583.104151@1] resume meson-keyinput.0+ @ 6189, parent: platform

[ 4583.109940@1] key_input resume by alarm event, reg: 12345678

[ 4583.115684@1] resume aml-audio.0+ @ 6189, parent: platform

[ 4583.121153@1] resume aml-dai.0+ @ 6189, parent: platform

[ 4583.126363@1] resume aml_rt5631_audio.0+ @ 6189, parent: platform

[ 4583.132520@1] resume ppmgr.0+ @ 6189, parent: platform

[ 4583.137558@1] resume mesonvout2.0+ @ 6189, parent: platform

[ 4583.143188@1] resume freescale.0+ @ 6189, parent: platform

[ 4583.148579@1] resume meson-cs-regulator.0+ @ 6189, parent: platform

[ 4583.154910@1] resume cpufreq-meson+ @ 6189, parent: platform

[ 4583.160543@1] resume simdetect.0+ @ 6189, parent: platform

[ 4583.165941@1] resume aml-modem+ @ 6189, parent: platform

[ 4583.171290@1] do aml_modem_resume on ON state

[ 4583.175551@1] MU509 power_on!

[ 4583.175584@1]  modem_enable for MU509 !

[ 4583.230605@1]

[ 4583.933747@1] resume gps_power+ @ 6189, parent: platform

[ 4583.934018@1] resume wifi_power+ @ 6189, parent: platform

[ 4583.939144@1] resume bt-dev+ @ 6189, parent: platform

[ 4583.944264@1] resume mesonlcd.0+ @ 6189, parent: platform

[ 4583.949561@1] resume aml-bl+ @ 6189, parent: platform

[ 4583.954733@1] resume i2c-0+ @ 6189, parent: none

[ 4583.954814@0] resume usb1+ @ 6188, parent: lm0

[ 4583.954971@0] resume usb2+ @ 6192, parent: lm1

[ 4583.968136@1] resume 0-0021+ @ 6189, parent: i2c-0

[ 4583.973238@1] resume 0-003c+ @ 6189, parent: i2c-0

[ 4583.977829@1] resume 0-0038+ @ 6189, parent: i2c-0

[ 4583.982495@1] resume i2c-1+ @ 6189, parent: none

[ 4583.986972@1] resume 1-0068+ @ 6189, parent: i2c-1

[ 4583.991969@1] resume 1-001a+ @ 6189, parent: i2c-1

[ 4583.996524@1] resume i2c-2+ @ 6189, parent: none

[ 4584.001226@1] resume 2-0034+ @ 6189, parent: i2c-2

[ 4584.005897@1] resume axp20-regulator.21+ @ 6189, parent: 2-0034

[ 4584.011885@1] resume axp20-regulator.22+ @ 6189, parent: 2-0034

[ 4584.017699@1] resume axp20-regulator.23+ @ 6189, parent: 2-0034

[ 4584.023679@1] resume axp20-regulator.24+ @ 6189, parent: 2-0034

[ 4584.029504@1] resume axp20-regulator.25+ @ 6189, parent: 2-0034

[ 4584.035479@1] resume axp20-regulator.26+ @ 6189, parent: 2-0034

[ 4584.041386@1] resume axp20-regulator.27+ @ 6189, parent: 2-0034

[ 4584.047213@1] resume axp20-supplyer.28+ @ 6189, parent: 2-0034

[ 4584.054433@1] resume axp20-gpio.29+ @ 6189, parent: 2-0034

[ 4584.058530@1] resume amcanvas+ @ 6189, parent: platform

[ 4584.063820@1] resume regulatory.0+ @ 6189, parent: platform

[ 4584.075468@1] m3 nand resume entered

[ 4584.076018@1] resume input0+ @ 6189, parent: m1-adckp.0

[ 4584.078986@1] wakeup wake lock: event0-182

[ 4584.080707@0] resume 2-1+ @ 6196, parent: usb2

[ 4584.088225@1] resume input1+ @ 6189, parent: meson-keyinput.0

[ 4584.093567@1] resume input2+ @ 6189, parent: axp20-supplyer.28

[ 4584.099170@1] resume reg-20-cs-ldo2+ @ 6189, parent: platform

[ 4584.104694@1] resume reg-20-cs-ldo3+ @ 6189, parent: platform

[ 4584.110408@1] resume reg-20-cs-ldo4+ @ 6189, parent: platform

[ 4584.116039@1] resume reg-20-cs-buck2+ @ 6189, parent: platform

[ 4584.121930@1] resume reg-20-cs-buck3+ @ 6189, parent: platform

[ 4584.127667@1] resume reg-20-cs-ldoio0+ @ 6189, parent: platform

[ 4584.133632@1] audiodsp resumed

[ 4584.137291@1] resume alarm+ @ 6189, parent: platform

[ 4584.142875@1] reset gpo !

[ 4584.144434@1] resume boot_monitor+ @ 6189, parent: platform

[ 4584.149916@1] resume snd-soc-dummy+ @ 6189, parent: platform

[ 4584.155468@1] resume soc-audio+ @ 6189, parent: platform

[ 4584.160809@1] enter rt5631_resume_pre

[ 4584.161263@1] resume input3+ @ 6189, parent: card0

[ 4584.165459@1] resume input4+ @ 6189, parent: none

[ 4584.170642@1] resume mali_dev.0+ @ 6189, parent: platform

[ 4584.175518@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_resume

[ 4584.182273@1] resume memorycard0:sdio:1+ @ 6189, parent: memorycard0:sdio

[ 4584.188670@1] bcmsdh_sdmmc_resume

[ 4584.192138@1] resume memorycard0:sdio:2+ @ 6189, parent: memorycard0:sdio

[ 4584.198727@1] bcmsdh_sdmmc_resume

[ 4584.202207@1] dhd resume, late probe bcmsdh

[ 4584.202299@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_resume

[ 4584.208710@1] PM: resume of devices complete after 1215.749 msecs

[ 4584.219695@1] Restarting tasks ...

[ 4584.221670@0] usb 2-1: USB disconnect, device number 4

[ 4584.270450@1] enter rt5631_set_bias_level level: 2

[ 4584.295325@1] enter rt5631_set_bias_level level: 2

[ 4584.295510@1] done.

[ 4584.297062@1] enter rt5631_set_bias_level level: 3

[ 4584.331488@0] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0

[ 4584.307721@1] mali_meson_poweron: Interrupt received.

[ 4584.393522@0] option 2-1:1.0: device disconnected

[ 4584.417423@1] enter rt5631_set_bias_level level: 3

[ 4584.428863@1] ***Entered sound/soc/aml/aml_dai.c:aml_dai_i2s_resume

[ 4584.429735@1] enter rt5631_resume_post

[ 4584.429844@1] rt5631 hp unpluged

[ 4584.440766@1] ** disable watchdog

[ 4584.441110@1] suspend: exit suspend, ret = 0 (2013-01-31 11:50:03.757783000 UTC)

[ 4584.486433@0] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1

[ 4584.497055@0] option 2-1:1.1: device disconnected

[ 4584.525441@0] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2

[ 4584.531709@0] option 2-1:1.2: device disconnected

[ 4584.565583@0] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3

[ 4584.575622@0] option 2-1:1.3: device disconnected

[ 4584.605473@0] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4

[ 4584.614458@0] option 2-1:1.4: device disconnected

[ 4584.620949@1] sd_mmc_info->card_type=0

[ 4584.621135@1] begin SDIO check ......

[ 4584.645736@1] sdio_timeout_int_times = 0; timeout = 498

[ 4584.668815@1] sdio_timeout_int_times = 0; timeout = 498

[ 4584.669080@1] SEND OP timeout @1

[ 4584.672260@1] begin SD&SDHC check ......

[ 4584.690921@1] set type to SDHC

[ 4585.161174@0] S18A : 0

[ 4585.220682@0] Got RCA = 4660

[ 4585.221535@0]

[ 4585.221551@0] ***********CID*************

[ 4585.223689@0] 02:54:4d:53:41:30:38:47:04:9c:00:00:58:00:a2:00:

[ 4585.229330@0] MID[8]=2

[ 4585.237394@0] OID[16]=TM

[ 4585.237482@0] PNM[40]=SA08G

[ 4585.237547@0] PRV[8]=4

[ 4585.239540@0] PSN[32]=0x5800009c

[ 4585.243071@0] Reserved[4]=0

[ 4585.245530@0] year[8].month[4]=2010.2

[ 4585.249172@0] NotUsed[1]=0

[ 4585.252084@0] CRC[7]=0

[ 4585.252100@0]

[ 4585.256661@0]

[ 4585.256682@0] ********** CSD v2 **************

[ 4585.262039@0] 40:0e:00:32:5b:59:00:00:3b:67:7f:80:0a:40:00:00:

[ 4585.267579@0] CSD_STRUCTURE[2]=1

[ 4585.271323@0] Reserved1[6]=0

[ 4585.273832@0] TAAC[8]=14

[ 4585.276347@0] NSAC[8]=0

[ 4585.278775@0] TRAN_SPEED[8]=50

[ 4585.281901@0] CCC[8+4]=0x5b5

[ 4585.284669@0] READ_BL_LEN[4]=9

[ 4585.287734@0] READ_BL_PARTIAL[1]=0

[ 4585.291196@0] WRITE_BLK_MISALIGN[1]=0

[ 4585.297244@0] READ_BLK_MISALIGN[1]=0

[ 4585.298303@0] DSR_IMP[1]=0

[ 4585.301405@0] Reserved2[4]=0

[ 4585.303852@0] Reserved3[2]=0

[ 4585.306717@0] C_SIZE[6+8+8]=15207

[ 4585.310193@0] Reserved4[1]=0

[ 4585.312972@0] ERASE_BLK_EN[1]=1

[ 4585.316032@0] SECTOR_SIZE[6+1]=127

[ 4585.319386@0] WP_GRP_SIZE[7]=0

[ 4585.322824@0] WP_GRP_ENABLE[1]=0

[ 4585.325652@0] Reserved5[2]=0

[ 4585.328500@0] R2W_FACTOR[3]=2

[ 4585.331838@0] WRITE_BL_LEN[2+2]=9

[ 4585.334769@0] WRITE_BL_PARTIAL[1]=0

[ 4585.338248@0] Reserved6[5]=0

[ 4585.341225@0] FILE_FORMAT_GRP[1]=0

[ 4585.344480@0] COPY[1]=0

[ 4585.346920@0] PERM_WRITE_PROTECT[1]=0

[ 4585.350737@0] TMP_WRITE_PROTECT[1]=0

[ 4585.354110@0] FILE_FORMAT[2]=0

[ 4585.357145@0] Reserved7[2]=0

[ 4585.362880@0] CRC[7]=0

[ 4585.362970@0] NotUsed[1]=0

[ 4585.362984@0]

[ 4585.367225@0] total block nums : 0xeda000(15572992)

[ 4585.373041@0]

[ 4585.373068@0] ***********SCR*************

[ 4585.377201@0] 02:35:80:00:01:00:00:00:

[ 4585.380757@0] SD_SPEC[4]=2

[ 4585.383638@0] SCR_STRUCTURE[4]=0

[ 4585.386831@0] SD_BUS_WIDTHS[4]=5

[ 4585.390885@0] SD_SECURITY[3]=3

[ 4585.393081@0] DATA_STAT_AFTER_ERASE[1]=0

[ 4585.396985@0] Rsv1[7]=0

[ 4585.399415@0] SD_SPEC3[1]=1

[ 4585.402496@0] CMD_SUPPORT[2]=0

[ 4585.405233@0] Rsv2[6]=0

[ 4585.407665@0] Reserved2[32]=1

[ 4585.407680@0]

[ 4585.414521@0] 00648001 80018001 80018001 80030000

[ 4585.417036@0] 01000000 00000000 00000000 00000000

[ 4585.421809@0] 00000000 00000000 00000000 00000000

[ 4585.426585@0] 00000000 00000000 00000000 00000000

[ 4585.431365@0]

[ 4585.431389@0] ****************switch status****************

[ 4585.438565@0] Data_Struction_Verion : 0

[ 4585.442602@0] Max_Current_Consumption : 100

[ 4585.446560@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 4585.451373@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 4585.455580@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 4585.460248@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 4585.464606@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 4585.469119@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 4585.473631@0] Function_Group_Status6 : 0

[ 4585.477536@0] Function_Group_Status5 : 0

[ 4585.481735@0] Function_Group_Status4 : 0

[ 4585.485350@0] Function_Group_Status3 : 0

[ 4585.491730@0] Function_Group_Status2 : 0

[ 4585.493164@0] Function_Group_Status1 : 1

[ 4585.493179@0]

[ 4585.499782@0] 00648001 80018001 80018001 80030000

[ 4585.503488@0] 01000000 00000000 00000000 00000000

[ 4585.508260@0] 00000000 00000000 00000000 00000000

[ 4585.513035@0] 00000000 00000000 00000000 00000000

[ 4585.517812@0]

[ 4585.517821@0] ****************switch status****************

[ 4585.525098@0] Data_Struction_Verion : 0

[ 4585.528847@0] Max_Current_Consumption : 100

[ 4585.533138@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 4585.537516@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 4585.542032@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 4585.546543@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 4585.551147@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 4585.556501@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 4585.560188@0] Function_Group_Status6 : 0

[ 4585.564007@0] Function_Group_Status5 : 0

[ 4585.567915@0] Function_Group_Status4 : 0

[ 4585.572094@0] Function_Group_Status3 : 0

[ 4585.575710@0] Function_Group_Status2 : 0

[ 4585.579613@0] Function_Group_Status1 : 1

[ 4585.579626@0]

[ 4585.585431@0] monitor : resume

[ 4586.910238@0] Indeed it is in host mode hprt0 = 00021501

[ 4587.090144@0] usb 2-1: new high speed USB device number 5 using dwc_otg

[ 4587.091840@0] Indeed it is in host mode hprt0 = 00001101

[ 4587.305958@0] usb 2-1: New USB device found, idVendor=19f5, idProduct=9013

[ 4587.307406@0] usb 2-1: New USB device strings: Mfr=4, Product=3, SerialNumber=0

[ 4587.315181@0] usb 2-1: Product: Qualcomm CDMA Technologies MSM

[ 4587.320669@0] usb 2-1: Manufacturer: Qualcomm, Incorporated

[ 4587.454773@0] option 2-1:1.0: GSM modem (1-port) converter detected

[ 4587.472350@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0

[ 4587.481964@0] option 2-1:1.1: GSM modem (1-port) converter detected

[ 4587.503647@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1

[ 4587.513784@1] option 2-1:1.2: GSM modem (1-port) converter detected

[ 4587.536572@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2

[ 4587.546684@1] option 2-1:1.3: GSM modem (1-port) converter detected

[ 4587.569234@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3

[ 4587.579088@1] option 2-1:1.4: GSM modem (1-port) converter detected

[ 4587.594297@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB4

[ 4589.498368@0] PM: Syncing filesystems ... done.

[ 4589.541257@0] Freezing user space processes ... (elapsed 0.04 seconds) done.

[ 4589.591658@1] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

[ 4589.624904@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_suspend

[ 4589.625876@0] suspend 2-1+ @ 6181, parent: usb2

[ 4589.626173@0] option: option_instat_callback: error -2

[ 4589.626393@0] option: option_instat_callback: error -2

[ 4589.640982@1] suspend memorycard0:sdio:2+ @ 6189, parent: memorycard0:sdio

[ 4589.647612@1] bcmsdh_sdmmc_suspend

[ 4589.651139@1] suspend memorycard0:sdio:1+ @ 6189, parent: memorycard0:sdio

[ 4589.657889@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_suspend

[ 4589.664511@1] suspend mali_dev.0+ @ 6189, parent: platform

[ 4589.670493@1] suspend input4+ @ 6189, parent: none

[ 4589.674696@1] suspend input3+ @ 6189, parent: card0

[ 4589.679583@1] suspend soc-audio+ @ 6189, parent: platform

[ 4589.685002@1] enter rt5631_suspend_pre

[ 4589.685093@1] ***Entered sound/soc/aml/aml_dai.c:aml_dai_i2s_suspend

[ 4589.693676@0] enter rt5631_set_bias_level level: 2

[ 4589.694097@0] enter rt5631_set_bias_level level: 2

[ 4589.695124@0] enter rt5631_set_bias_level level: 1

[ 4589.695242@0] enter rt5631_set_bias_level level: 1

[ 4589.698235@1] enter rt5631_suspend_post

[ 4589.698372@1] suspend snd-soc-dummy+ @ 6189, parent: platform

[ 4589.699108@0] suspend usb2+ @ 6179, parent: lm1

[ 4589.699187@1] suspend boot_monitor+ @ 6189, parent: platform

[ 4589.699342@1] suspend alarm+ @ 6189, parent: platform

[ 4589.704103@1] suspend usb1+ @ 6180, parent: lm0

[ 4589.750248@1] audiodsp suspend

[ 4589.750475@1] suspend reg-20-cs-ldoio0+ @ 6189, parent: platform

[ 4589.753847@1] suspend reg-20-cs-buck3+ @ 6189, parent: platform

[ 4589.759741@1] suspend reg-20-cs-buck2+ @ 6189, parent: platform

[ 4589.765761@1] suspend reg-20-cs-ldo4+ @ 6189, parent: platform

[ 4589.771551@1] suspend reg-20-cs-ldo3+ @ 6189, parent: platform

[ 4589.777274@1] suspend reg-20-cs-ldo2+ @ 6189, parent: platform

[ 4589.783254@1] suspend input2+ @ 6189, parent: axp20-supplyer.28

[ 4589.789194@1] suspend input1+ @ 6189, parent: meson-keyinput.0

[ 4589.794958@1] suspend input0+ @ 6189, parent: m1-adckp.0

[ 4589.800870@1] m3 nand suspend entered

[ 4589.931124@1] suspend regulatory.0+ @ 6189, parent: platform

[ 4589.931467@1] suspend amcanvas+ @ 6189, parent: platform

[ 4589.936702@1] suspend axp20-gpio.29+ @ 6189, parent: 2-0034

[ 4589.942332@1] suspend axp20-supplyer.28+ @ 6189, parent: 2-0034

[ 4589.950581@1] suspend axp20-regulator.27+ @ 6189, parent: 2-0034

[ 4589.954096@1] suspend axp20-regulator.26+ @ 6189, parent: 2-0034

[ 4589.960199@1] suspend axp20-regulator.25+ @ 6189, parent: 2-0034

[ 4589.966072@1] suspend axp20-regulator.24+ @ 6189, parent: 2-0034

[ 4589.972361@1] suspend axp20-regulator.23+ @ 6189, parent: 2-0034

[ 4589.978052@1] suspend axp20-regulator.22+ @ 6189, parent: 2-0034

[ 4589.984151@1] suspend axp20-regulator.21+ @ 6189, parent: 2-0034

[ 4589.990147@1] suspend 2-0034+ @ 6189, parent: i2c-2

[ 4589.994900@1] suspend i2c-2+ @ 6189, parent: none

[ 4589.999570@1] suspend 1-001a+ @ 6189, parent: i2c-1

[ 4590.004520@1] suspend 1-0068+ @ 6189, parent: i2c-1

[ 4590.009338@1] suspend i2c-1+ @ 6189, parent: none

[ 4590.014083@1] suspend 0-0038+ @ 6189, parent: i2c-0

[ 4590.018844@1] suspend 0-003c+ @ 6189, parent: i2c-0

[ 4590.023798@1] suspend 0-0021+ @ 6189, parent: i2c-0

[ 4590.028582@1] suspend i2c-0+ @ 6189, parent: none

[ 4590.033400@1] suspend aml-bl+ @ 6189, parent: platform

[ 4590.038374@1] suspend mesonlcd.0+ @ 6189, parent: platform

[ 4590.043928@1] suspend bt-dev+ @ 6189, parent: platform

[ 4590.048963@1] suspend wifi_power+ @ 6189, parent: platform

[ 4590.054514@1] suspend gps_power+ @ 6189, parent: platform

[ 4590.059815@1] suspend aml-modem+ @ 6189, parent: platform

[ 4590.065231@1] do aml_modem_suspend

[ 4590.068625@1] MU509 power_off!

[ 4590.068657@1]  modem_disable for MU509 !

[ 4590.073501@1]

[ 4590.077394@1] suspend simdetect.0+ @ 6189, parent: platform

[ 4590.083170@1] suspend cpufreq-meson+ @ 6189, parent: platform

[ 4590.088809@1] suspend meson-cs-regulator.0+ @ 6189, parent: platform

[ 4590.095228@1] suspend freescale.0+ @ 6189, parent: platform

[ 4590.100777@1] suspend mesonvout2.0+ @ 6189, parent: platform

[ 4590.106335@1] suspend ppmgr.0+ @ 6189, parent: platform

[ 4590.111623@1] suspend aml_rt5631_audio.0+ @ 6189, parent: platform

[ 4590.117706@1] suspend aml-dai.0+ @ 6189, parent: platform

[ 4590.123177@1] suspend aml-audio.0+ @ 6189, parent: platform

[ 4590.128650@1] suspend meson-keyinput.0+ @ 6189, parent: platform

[ 4590.134729@1] suspend m1-adckp.0+ @ 6189, parent: platform

[ 4590.140184@1] suspend saradc.0+ @ 6189, parent: platform

[ 4590.145402@1] suspend aml_rtc+ @ 6189, parent: platform

[ 4590.150721@1] suspend efuse+ @ 6189, parent: platform

[ 4590.155637@1] suspend pm-meson+ @ 6189, parent: platform

[ 4590.161028@1] suspend AMLOGIC_CARD+ @ 6189, parent: platform

[ 4590.166574@1] suspend vm.0+ @ 6189, parent: platform

[ 4590.171608@1] suspend amvdec_656in+ @ 6189, parent: platform

[ 4590.177164@1] suspend vdin+ @ 6189, parent: platform

[ 4590.182190@1] suspend aml_nand.0+ @ 6189, parent: platform

[ 4590.187579@1] suspend mesonstream.0+ @ 6189, parent: platform

[ 4590.193389@1] suspend mesonvout.0+ @ 6189, parent: platform

[ 4590.198880@1] suspend mesonfb-ext.0+ @ 6189, parent: platform

[ 4590.204692@1] suspend mesonfb.0+ @ 6189, parent: platform

[ 4590.209996@1] suspend mesonuart+ @ 6189, parent: platform

[ 4590.215447@1] suspend aml-i2c.2+ @ 6189, parent: platform

[ 4590.220821@1] suspend aml-i2c.1+ @ 6189, parent: platform

[ 4590.226118@1] suspend aml-i2c.0+ @ 6189, parent: platform

[ 4590.231620@1] suspend reg-dummy+ @ 6189, parent: platform

[ 4590.236884@1] suspend power.0+ @ 6189, parent: platform

[ 4590.242175@1] suspend amhdmitx.0+ @ 6189, parent: platform

[ 4590.247829@1] PM: suspend of devices complete after 623.695 msecs

[ 4590.253686@1] enter meson_pm_prepare!

[ 4590.262878@1] PM: late suspend of devices complete after 5.586 msecs

[ 4590.263759@1] Disabling non-boot CPUs ...

[ 4590.280246@1] IRQ61 no longer affine to CPU1

[ 4590.281184@1] Disable timerD

[ 4590.282248@0] CPU1: shutdown

[ 4590.291887@0] Disable timerB

[ 4590.292065@0] Disable timerA

[ 4590.292518@0] MMC_LP_CTRL1 before=0x78000030

[ 4590.296748@0] MMC_LP_CTRL1 after=0x60a80000

[ 4590.300086@0] cpufreq suspend sleep_freq=96Mhz max=1320MHz

[ 4590.300086@0] enter meson_pm_suspend!

[ 4590.300086@0] ** enable watchdog

[ 4590.300086@0] target ddr clock 0x8001082b!

[ 4590.300086@0] analog off

[ 4590.300086@0] SAR_ADC(0xf110868c):0xc3a8500a & ~0x40200000 | 0x10000000 = 0x9388500a

[ 4590.300086@0] LED_PWM_REG0(0xf1108768):0x63100f & ~0x1000 | 0x2000 = 0x63100f

[ 4590.300086@0] clk HHI_AUD_CLK_CNTL(f1104178) off

[ 4590.300086@0] clk HHI_HDMI_CLK_CNTL(f11041cc) off

[ 4590.300086@0] clk HHI_MPEG_CLK_CNTL(f1104174) off

[ 4590.300086@0] clk HHI_VDEC_CLK_CNTL(f11041b4) off

[ 4590.300086@0] sleep ...

[ 4590.300086@0] ** disable watchdog

[ 4590.300086@0] power down cpu --

[ 4590.300086@0] ** enable watchdog

[ 4590.300086@0] ... wake up

[ 4590.300086@0] RTCADD3=0x23600000

[ 4590.300086@0] RTCADD3=0x3600000

[ 4590.300086@0] clk HHI_VDEC_CLK_CNTL(f11041b4) on

[ 4590.300086@0] clk HHI_MPEG_CLK_CNTL(f1104174) on

[ 4590.300086@0] clk HHI_HDMI_CLK_CNTL(f11041cc) on

[ 4590.300086@0] clk HHI_AUD_CLK_CNTL(f1104178) on

[ 4590.300086@0] analog on

[ 4590.300086@0] cpufreq resume sleep_freq=96Mhz

[ 4590.300086@0] MMC_LP_CTRL1 before=0x60a80000

[ 4590.300086@0] MMC_LP_CTRL1 after=0x78000030

[ 4590.300086@0] Resume timerA

[ 4590.300086@0] Resume timerB

[ 4590.300086@0] Enabling non-boot CPUs ...

[ 4590.289093@1] CPU1: Booted secondary processor

[ 4590.289093@1] MESON TIMER-D c09630c0

[ 4590.326511@1] Disable timerD

[ 4590.326511@1] CPU1: Unknown IPI message 0x0

[ 4590.336951@0] CPU1 is up

[ 4590.340173@1] Switched to NOHz mode on CPU #1

[ 4590.344019@0] PM: early resume of devices complete after 5.956 msecs

[ 4590.349624@0] enter meson_pm_finish!

[ 4590.356110@0] resume amhdmitx.0+ @ 6189, parent: platform

[ 4590.357837@0] resume power.0+ @ 6189, parent: platform

[ 4590.363281@0] resume reg-dummy+ @ 6189, parent: platform

[ 4590.368078@0] resume aml-i2c.0+ @ 6189, parent: platform

[ 4590.373885@0] resume aml-i2c.1+ @ 6189, parent: platform

[ 4590.378645@0] resume aml-i2c.2+ @ 6189, parent: platform

[ 4590.384596@0] resume mesonuart+ @ 6189, parent: platform

[ 4590.389236@0] resume mesonfb.0+ @ 6189, parent: platform

[ 4590.394853@0] resume mesonfb-ext.0+ @ 6189, parent: platform

[ 4590.400620@0] resume mesonvout.0+ @ 6189, parent: platform

[ 4590.405646@0] resume mesonstream.0+ @ 6189, parent: platform

[ 4590.411640@0] resume aml_nand.0+ @ 6189, parent: platform

[ 4590.416663@0] resume vdin+ @ 6189, parent: platform

[ 4590.421666@0] resume amvdec_656in+ @ 6189, parent: platform

[ 4590.427080@0] resume vm.0+ @ 6189, parent: platform

[ 4590.432386@0] resume AMLOGIC_CARD+ @ 6189, parent: platform

[ 4590.437494@0] resume pm-meson+ @ 6189, parent: platform

[ 4590.442842@0] resume efuse+ @ 6189, parent: platform

[ 4590.447651@0] resume aml_rtc+ @ 6189, parent: platform

[ 4590.453039@0] resume saradc.0+ @ 6189, parent: platform

[ 4590.457978@0] resume m1-adckp.0+ @ 6189, parent: platform

[ 4590.463713@0] resume meson-keyinput.0+ @ 6189, parent: platform

[ 4590.469249@0] key_input resume by alarm event, reg: 12345678

[ 4590.475036@0] resume aml-audio.0+ @ 6189, parent: platform

[ 4590.480483@0] resume aml-dai.0+ @ 6189, parent: platform

[ 4590.485666@0] resume aml_rt5631_audio.0+ @ 6189, parent: platform

[ 4590.492153@0] resume ppmgr.0+ @ 6189, parent: platform

[ 4590.496869@0] resume mesonvout2.0+ @ 6189, parent: platform

[ 4590.503143@0] resume freescale.0+ @ 6189, parent: platform

[ 4590.507847@0] resume meson-cs-regulator.0+ @ 6189, parent: platform

[ 4590.514111@0] resume cpufreq-meson+ @ 6189, parent: platform

[ 4590.519740@0] resume simdetect.0+ @ 6189, parent: platform

[ 4590.525340@0] resume aml-modem+ @ 6189, parent: platform

[ 4590.530509@0] do aml_modem_resume on ON state

[ 4590.534840@0] MU509 power_on!

[ 4590.534842@0]  modem_enable for MU509 !

[ 4590.589582@0]

[ 4591.290671@0] resume gps_power+ @ 6189, parent: platform

[ 4591.290708@0] resume wifi_power+ @ 6189, parent: platform

[ 4591.295975@0] resume bt-dev+ @ 6189, parent: platform

[ 4591.301144@0] resume mesonlcd.0+ @ 6189, parent: platform

[ 4591.306391@0] resume aml-bl+ @ 6189, parent: platform

[ 4591.311443@0] resume usb1+ @ 6179, parent: lm0

[ 4591.315862@0] resume i2c-0+ @ 6189, parent: none

[ 4591.315872@1] resume usb2+ @ 6182, parent: lm1

[ 4591.324907@0] resume 0-0021+ @ 6189, parent: i2c-0

[ 4591.329654@0] resume 0-003c+ @ 6189, parent: i2c-0

[ 4591.334591@0] resume 0-0038+ @ 6189, parent: i2c-0

[ 4591.339201@0] resume i2c-1+ @ 6189, parent: none

[ 4591.343814@0] resume 1-0068+ @ 6189, parent: i2c-1

[ 4591.348581@0] resume 1-001a+ @ 6189, parent: i2c-1

[ 4591.353362@0] resume i2c-2+ @ 6189, parent: none

[ 4591.357950@0] resume 2-0034+ @ 6189, parent: i2c-2

[ 4591.362855@0] resume axp20-regulator.21+ @ 6189, parent: 2-0034

[ 4591.368627@0] resume axp20-regulator.22+ @ 6189, parent: 2-0034

[ 4591.374547@0] resume axp20-regulator.23+ @ 6189, parent: 2-0034

[ 4591.380440@0] resume axp20-regulator.24+ @ 6189, parent: 2-0034

[ 4591.386334@0] resume axp20-regulator.25+ @ 6189, parent: 2-0034

[ 4591.392365@0] resume axp20-regulator.26+ @ 6189, parent: 2-0034

[ 4591.398138@0] resume axp20-regulator.27+ @ 6189, parent: 2-0034

[ 4591.404059@0] resume axp20-supplyer.28+ @ 6189, parent: 2-0034

[ 4591.410965@0] resume axp20-gpio.29+ @ 6189, parent: 2-0034

[ 4591.415328@0] resume amcanvas+ @ 6189, parent: platform

[ 4591.420668@0] resume regulatory.0+ @ 6189, parent: platform

[ 4591.427354@0] m3 nand resume entered

[ 4591.429687@0] resume input0+ @ 6189, parent: m1-adckp.0

[ 4591.434916@0] wakeup wake lock: event0-182

[ 4591.438966@0] resume input1+ @ 6189, parent: meson-keyinput.0

[ 4591.444690@0] resume 2-1+ @ 2340, parent: usb2

[ 4591.449311@0] resume input2+ @ 6189, parent: axp20-supplyer.28

[ 4591.455082@0] resume reg-20-cs-ldo2+ @ 6189, parent: platform

[ 4591.460646@0] resume reg-20-cs-ldo3+ @ 6189, parent: platform

[ 4591.466363@0] resume reg-20-cs-ldo4+ @ 6189, parent: platform

[ 4591.472102@0] resume reg-20-cs-buck2+ @ 6189, parent: platform

[ 4591.477907@0] resume reg-20-cs-buck3+ @ 6189, parent: platform

[ 4591.483861@0] resume reg-20-cs-ldoio0+ @ 6189, parent: platform

[ 4591.489625@0] audiodsp resumed

[ 4591.493088@0] resume alarm+ @ 6189, parent: platform

[ 4591.498186@0] resume boot_monitor+ @ 6189, parent: platform

[ 4591.498551@1] reset gpo !

[ 4591.505823@0] resume snd-soc-dummy+ @ 6189, parent: platform

[ 4591.511542@0] resume soc-audio+ @ 6189, parent: platform

[ 4591.516711@0] enter rt5631_resume_pre

[ 4591.516881@0] resume input3+ @ 6189, parent: card0

[ 4591.521561@0] resume input4+ @ 6189, parent: none

[ 4591.526215@0] resume mali_dev.0+ @ 6189, parent: platform

[ 4591.531566@0] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_resume

[ 4591.538005@0] resume memorycard0:sdio:1+ @ 6189, parent: memorycard0:sdio

[ 4591.544876@0] bcmsdh_sdmmc_resume

[ 4591.548043@0] resume memorycard0:sdio:2+ @ 6189, parent: memorycard0:sdio

[ 4591.554830@0] bcmsdh_sdmmc_resume

[ 4591.558109@0] dhd resume, late probe bcmsdh

[ 4591.558116@0] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_resume

[ 4591.564580@0] PM: resume of devices complete after 1211.930 msecs

[ 4591.571317@0] Restarting tasks ...

[ 4591.574094@1] usb 2-1: USB disconnect, device number 5

[ 4591.581569@0] done.

[ 4591.598090@1] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0

[ 4591.601135@1] option 2-1:1.0: device disconnected

[ 4591.607855@1] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1

[ 4591.614317@1] option 2-1:1.1: device disconnected

[ 4591.620462@1] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2

[ 4591.627140@1] option 2-1:1.2: device disconnected

[ 4591.592996@0] mali_meson_poweron: Interrupt received.

[ 4591.633754@1] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3

[ 4591.634228@1] option 2-1:1.3: device disconnected

[ 4591.636365@1] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4

[ 4591.636795@1] option 2-1:1.4: device disconnected

[ 4591.720119@1] enter rt5631_set_bias_level level: 2

[ 4591.720129@0] enter rt5631_set_bias_level level: 2

[ 4591.720226@0] ** disable watchdog

[ 4591.720256@0] suspend: exit suspend, ret = 0 (2013-01-31 11:51:11.247842995 UTC)

[ 4591.726054@1] enter rt5631_set_bias_level level: 3

[ 4591.726073@1] enter rt5631_set_bias_level level: 3

[ 4591.726496@0] ***Entered sound/soc/aml/aml_dai.c:aml_dai_i2s_resume

[ 4591.734302@0] enter rt5631_resume_post

[ 4591.820072@1] rt5631 hp unpluged

[ 4591.970330@1] sd_mmc_info->card_type=0

[ 4591.970370@1] begin SDIO check ......

[ 4591.994780@1] sdio_timeout_int_times = 0; timeout = 498

[ 4592.017501@1] sdio_timeout_int_times = 0; timeout = 498

[ 4592.017550@1] SEND OP timeout @1

[ 4592.021227@1] begin SD&SDHC check ......

[ 4592.040471@0] set type to SDHC

[ 4592.500877@0] S18A : 0

[ 4592.560462@0] Got RCA = 4660

[ 4592.561245@0]

[ 4592.561254@0] ***********CID*************

[ 4592.563439@0] 02:54:4d:53:41:30:38:47:04:9c:00:00:58:00:a2:00:

[ 4592.569080@0] MID[8]=2

[ 4592.571638@0] OID[16]=TM

[ 4592.574114@0] PNM[40]=SA08G

[ 4592.576891@0] PRV[8]=4

[ 4592.579235@0] PSN[32]=0x5800009c

[ 4592.582633@0] Reserved[4]=0

[ 4592.585226@0] year[8].month[4]=2010.2

[ 4592.588869@0] NotUsed[1]=0

[ 4592.591607@0] CRC[7]=0

[ 4592.591615@0]

[ 4592.596309@0]

[ 4592.596324@0] ********** CSD v2 **************

[ 4592.602067@0] 40:0e:00:32:5b:59:00:00:3b:67:7f:80:0a:40:00:00:

[ 4592.607272@0] CSD_STRUCTURE[2]=1

[ 4592.610866@0] Reserved1[6]=0

[ 4592.613523@0] TAAC[8]=14

[ 4592.616039@0] NSAC[8]=0

[ 4592.618470@0] TRAN_SPEED[8]=50

[ 4592.621541@0] CCC[8+4]=0x5b5

[ 4592.624375@0] READ_BL_LEN[4]=9

[ 4592.627410@0] READ_BL_PARTIAL[1]=0

[ 4592.630839@0] WRITE_BLK_MISALIGN[1]=0

[ 4592.634441@0] READ_BLK_MISALIGN[1]=0

[ 4592.637999@0] DSR_IMP[1]=0

[ 4592.640888@0] Reserved2[4]=0

[ 4592.643555@0] Reserved3[2]=0

[ 4592.646419@0] C_SIZE[6+8+8]=15207

[ 4592.649718@0] Reserved4[1]=0

[ 4592.652622@0] ERASE_BLK_EN[1]=1

[ 4592.655707@0] SECTOR_SIZE[6+1]=127

[ 4592.659091@0] WP_GRP_SIZE[7]=0

[ 4592.662160@0] WP_GRP_ENABLE[1]=0

[ 4592.665341@0] Reserved5[2]=0

[ 4592.668205@0] R2W_FACTOR[3]=2

[ 4592.671335@0] WRITE_BL_LEN[2+2]=9

[ 4592.674456@0] WRITE_BL_PARTIAL[1]=0

[ 4592.677927@0] Reserved6[5]=0

[ 4592.680824@0] FILE_FORMAT_GRP[1]=0

[ 4592.684176@0] COPY[1]=0

[ 4592.686607@0] PERM_WRITE_PROTECT[1]=0

[ 4592.690305@0] TMP_WRITE_PROTECT[1]=0

[ 4592.693811@0] FILE_FORMAT[2]=0

[ 4592.696849@0] Reserved7[2]=0

[ 4592.699713@0] CRC[7]=0

[ 4592.702276@0] NotUsed[1]=0

[ 4592.702286@0]

[ 4592.706834@0] total block nums : 0xeda000(15572992)

[ 4592.712512@0]

[ 4592.712523@0] ***********SCR*************

[ 4592.716901@0] 02:35:80:00:01:00:00:00:

[ 4592.720460@0] SD_SPEC[4]=2

[ 4592.723324@0] SCR_STRUCTURE[4]=0

[ 4592.726536@0] SD_BUS_WIDTHS[4]=5

[ 4592.729747@0] SD_SECURITY[3]=3

[ 4592.732971@0] DATA_STAT_AFTER_ERASE[1]=0

[ 4592.736692@0] Rsv1[7]=0

[ 4592.739122@0] SD_SPEC3[1]=1

[ 4592.741934@0] CMD_SUPPORT[2]=0

[ 4592.744937@0] Rsv2[6]=0

[ 4592.747369@0] Reserved2[32]=1

[ 4592.747377@0]

[ 4592.754019@0] 00648001 80018001 80018001 80030000

[ 4592.756742@0] 01000000 00000000 00000000 00000000

[ 4592.761515@0] 00000000 00000000 00000000 00000000

[ 4592.766289@0] 00000000 00000000 00000000 00000000

[ 4592.771065@0]

[ 4592.771073@0] ****************switch status****************

[ 4592.778268@0] Data_Struction_Verion : 0

[ 4592.782119@0] Max_Current_Consumption : 100

[ 4592.786255@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 4592.790945@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 4592.795282@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 4592.799795@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 4592.804320@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 4592.808832@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 4592.813341@0] Function_Group_Status6 : 0

[ 4592.817247@0] Function_Group_Status5 : 0

[ 4592.821443@0] Function_Group_Status4 : 0

[ 4592.825059@0] Function_Group_Status3 : 0

[ 4592.828964@0] Function_Group_Status2 : 0

[ 4592.832951@0] Function_Group_Status1 : 1

[ 4592.832972@0]

[ 4592.839478@0] 00648001 80018001 80018001 80030000

[ 4592.843199@0] 01000000 00000000 00000000 00000000

[ 4592.847972@0] 00000000 00000000 00000000 00000000

[ 4592.852746@0] 00000000 00000000 00000000 00000000

[ 4592.857521@0]

[ 4592.857536@0] ****************switch status****************

[ 4592.864794@0] Data_Struction_Verion : 0

[ 4592.868547@0] Max_Current_Consumption : 100

[ 4592.872779@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 4592.877228@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 4592.881744@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 4592.886257@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 4592.890873@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 4592.895283@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 4592.899793@0] Function_Group_Status6 : 0

[ 4592.903852@0] Function_Group_Status5 : 0

[ 4592.907606@0] Function_Group_Status4 : 0

[ 4592.911787@0] Function_Group_Status3 : 0

[ 4592.915418@0] Function_Group_Status2 : 0

[ 4592.919324@0] Function_Group_Status1 : 1

[ 4592.919343@0]

[ 4592.924984@0] monitor : resume

[ 4594.160360@1] Indeed it is in host mode hprt0 = 00021501

[ 4594.340381@1] usb 2-1: new high speed USB device number 6 using dwc_otg

[ 4594.342305@0] Indeed it is in host mode hprt0 = 00001101

[ 4594.554096@0] usb 2-1: New USB device found, idVendor=19f5, idProduct=9013

[ 4594.555516@0] usb 2-1: New USB device strings: Mfr=4, Product=3, SerialNumber=0

[ 4594.565789@0] usb 2-1: Product: Qualcomm CDMA Technologies MSM

[ 4594.568615@0] usb 2-1: Manufacturer: Qualcomm, Incorporated

[ 4594.598133@0] option 2-1:1.0: GSM modem (1-port) converter detected

[ 4594.615572@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0

[ 4594.624162@1] option 2-1:1.1: GSM modem (1-port) converter detected

[ 4594.639980@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1

[ 4594.651042@0] option 2-1:1.2: GSM modem (1-port) converter detected

[ 4594.665941@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2

[ 4594.673690@1] option 2-1:1.3: GSM modem (1-port) converter detected

[ 4594.688735@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3

[ 4594.698784@1] option 2-1:1.4: GSM modem (1-port) converter detected

[ 4594.715671@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB4

[ 4596.797434@0] PM: Syncing filesystems ... done.

[ 4596.815431@0] Freezing user space processes ... (elapsed 0.03 seconds) done.

[ 4596.851103@0] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

[ 4596.884604@0] suspend 2-1+ @ 6196, parent: usb2

[ 4596.884901@0] option: option_instat_callback: error -2

[ 4596.888866@0] option: option_instat_callback: error -2

[ 4596.894192@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_suspend

[ 4596.900544@1] suspend memorycard0:sdio:2+ @ 6189, parent: memorycard0:sdio

[ 4596.907249@1] bcmsdh_sdmmc_suspend

[ 4596.910732@1] suspend memorycard0:sdio:1+ @ 6189, parent: memorycard0:sdio

[ 4596.917516@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_suspend

[ 4596.924103@1] suspend mali_dev.0+ @ 6189, parent: platform

[ 4596.929875@1] suspend input4+ @ 6189, parent: none

[ 4596.934370@1] suspend input3+ @ 6189, parent: card0

[ 4596.939185@1] suspend soc-audio+ @ 6189, parent: platform

[ 4596.944575@1] enter rt5631_suspend_pre

[ 4596.944638@1] ***Entered sound/soc/aml/aml_dai.c:aml_dai_i2s_suspend

[ 4596.952542@0] enter rt5631_set_bias_level level: 2

[ 4596.952654@0] enter rt5631_set_bias_level level: 2

[ 4596.953816@0] enter rt5631_set_bias_level level: 1

[ 4596.953916@0] enter rt5631_set_bias_level level: 1

[ 4596.956158@1] enter rt5631_suspend_post

[ 4596.956258@1] suspend snd-soc-dummy+ @ 6189, parent: platform

[ 4596.956904@1] suspend boot_monitor+ @ 6189, parent: platform

[ 4596.957008@0] suspend usb1+ @ 6195, parent: lm0

[ 4596.957293@0] suspend usb2+ @ 2340, parent: lm1

[ 4596.971496@1] suspend alarm+ @ 6189, parent: platform

[ 4597.030178@1] audiodsp suspend

[ 4597.030403@1] suspend reg-20-cs-ldoio0+ @ 6189, parent: platform

[ 4597.033783@1] suspend reg-20-cs-buck3+ @ 6189, parent: platform

[ 4597.039679@1] suspend reg-20-cs-buck2+ @ 6189, parent: platform

[ 4597.045687@1] suspend reg-20-cs-ldo4+ @ 6189, parent: platform

[ 4597.051486@1] suspend reg-20-cs-ldo3+ @ 6189, parent: platform

[ 4597.057212@1] suspend reg-20-cs-ldo2+ @ 6189, parent: platform

[ 4597.063192@1] suspend input2+ @ 6189, parent: axp20-supplyer.28

[ 4597.069130@1] suspend input1+ @ 6189, parent: meson-keyinput.0

[ 4597.074884@1] suspend input0+ @ 6189, parent: m1-adckp.0

[ 4597.080822@1] m3 nand suspend entered

[ 4597.211248@1] suspend regulatory.0+ @ 6189, parent: platform

[ 4597.211590@1] suspend amcanvas+ @ 6189, parent: platform

[ 4597.216822@1] suspend axp20-gpio.29+ @ 6189, parent: 2-0034

[ 4597.222599@1] suspend axp20-supplyer.28+ @ 6189, parent: 2-0034

[ 4597.230641@1] suspend axp20-regulator.27+ @ 6189, parent: 2-0034

[ 4597.234219@1] suspend axp20-regulator.26+ @ 6189, parent: 2-0034

[ 4597.240308@1] suspend axp20-regulator.25+ @ 6189, parent: 2-0034

[ 4597.246194@1] suspend axp20-regulator.24+ @ 6189, parent: 2-0034

[ 4597.252285@1] suspend axp20-regulator.23+ @ 6189, parent: 2-0034

[ 4597.258169@1] suspend axp20-regulator.22+ @ 6189, parent: 2-0034

[ 4597.264252@1] suspend axp20-regulator.21+ @ 6189, parent: 2-0034

[ 4597.270257@1] suspend 2-0034+ @ 6189, parent: i2c-2

[ 4597.275021@1] suspend i2c-2+ @ 6189, parent: none

[ 4597.279695@1] suspend 1-001a+ @ 6189, parent: i2c-1

[ 4597.284639@1] suspend 1-0068+ @ 6189, parent: i2c-1

[ 4597.289461@1] suspend i2c-1+ @ 6189, parent: none

[ 4597.294189@1] suspend 0-0038+ @ 6189, parent: i2c-0

[ 4597.298966@1] suspend 0-003c+ @ 6189, parent: i2c-0

[ 4597.303910@1] suspend 0-0021+ @ 6189, parent: i2c-0

[ 4597.308705@1] suspend i2c-0+ @ 6189, parent: none

[ 4597.313520@1] suspend aml-bl+ @ 6189, parent: platform

[ 4597.318493@1] suspend mesonlcd.0+ @ 6189, parent: platform

[ 4597.324049@1] suspend bt-dev+ @ 6189, parent: platform

[ 4597.329086@1] suspend wifi_power+ @ 6189, parent: platform

[ 4597.334746@1] suspend gps_power+ @ 6189, parent: platform

[ 4597.339935@1] suspend aml-modem+ @ 6189, parent: platform

[ 4597.345367@1] do aml_modem_suspend

[ 4597.348747@1] MU509 power_off!

[ 4597.348781@1]  modem_disable for MU509 !

[ 4597.353630@1]

[ 4597.357512@1] suspend simdetect.0+ @ 6189, parent: platform

[ 4597.363296@1] suspend cpufreq-meson+ @ 6189, parent: platform

[ 4597.368930@1] suspend meson-cs-regulator.0+ @ 6189, parent: platform

[ 4597.375345@1] suspend freescale.0+ @ 6189, parent: platform

[ 4597.380898@1] suspend mesonvout2.0+ @ 6189, parent: platform

[ 4597.386458@1] suspend ppmgr.0+ @ 6189, parent: platform

[ 4597.391751@1] suspend aml_rt5631_audio.0+ @ 6189, parent: platform

[ 4597.397828@1] suspend aml-dai.0+ @ 6189, parent: platform

[ 4597.403326@1] suspend aml-audio.0+ @ 6189, parent: platform

[ 4597.408772@1] suspend meson-keyinput.0+ @ 6189, parent: platform

[ 4597.414857@1] suspend m1-adckp.0+ @ 6189, parent: platform

[ 4597.420308@1] suspend saradc.0+ @ 6189, parent: platform

[ 4597.425523@1] suspend aml_rtc+ @ 6189, parent: platform

[ 4597.430814@1] suspend efuse+ @ 6189, parent: platform

[ 4597.435761@1] suspend pm-meson+ @ 6189, parent: platform

[ 4597.441253@1] suspend AMLOGIC_CARD+ @ 6189, parent: platform

[ 4597.446697@1] suspend vm.0+ @ 6189, parent: platform

[ 4597.451743@1] suspend amvdec_656in+ @ 6189, parent: platform

[ 4597.457283@1] suspend vdin+ @ 6189, parent: platform

[ 4597.462317@1] suspend aml_nand.0+ @ 6189, parent: platform

[ 4597.467701@1] suspend mesonstream.0+ @ 6189, parent: platform

[ 4597.473514@1] suspend mesonvout.0+ @ 6189, parent: platform

[ 4597.479005@1] suspend mesonfb-ext.0+ @ 6189, parent: platform

[ 4597.484814@1] suspend mesonfb.0+ @ 6189, parent: platform

[ 4597.490201@1] suspend mesonuart+ @ 6189, parent: platform

[ 4597.495480@1] suspend aml-i2c.2+ @ 6189, parent: platform

[ 4597.500945@1] suspend aml-i2c.1+ @ 6189, parent: platform

[ 4597.506242@1] suspend aml-i2c.0+ @ 6189, parent: platform

[ 4597.511743@1] suspend reg-dummy+ @ 6189, parent: platform

[ 4597.517005@1] suspend power.0+ @ 6189, parent: platform

[ 4597.522296@1] suspend amhdmitx.0+ @ 6189, parent: platform

[ 4597.527949@1] PM: suspend of devices complete after 645.921 msecs

[ 4597.533805@1] enter meson_pm_prepare!

[ 4597.543032@1] PM: late suspend of devices complete after 5.622 msecs

[ 4597.543914@1] Disabling non-boot CPUs ...

[ 4597.560541@1] IRQ61 no longer affine to CPU1

[ 4597.561495@1] Disable timerD

[ 4597.562542@0] CPU1: shutdown

[ 4597.572644@0] Disable timerB

[ 4597.572829@0] Disable timerA

[ 4597.572998@0] MMC_LP_CTRL1 before=0x78000030

[ 4597.577174@0] MMC_LP_CTRL1 after=0x60a80000

[ 4597.580108@0] cpufreq suspend sleep_freq=96Mhz max=1320MHz

[ 4597.580108@0] enter meson_pm_suspend!

[ 4597.580108@0] ** enable watchdog

[ 4597.580108@0] target ddr clock 0x8001082b!

[ 4597.580108@0] analog off

[ 4597.580108@0] SAR_ADC(0xf110868c):0xc3a8500a & ~0x40200000 | 0x10000000 = 0x9388500a

[ 4597.580108@0] LED_PWM_REG0(0xf1108768):0x63100f & ~0x1000 | 0x2000 = 0x63100f

[ 4597.580108@0] clk HHI_AUD_CLK_CNTL(f1104178) off

[ 4597.580108@0] clk HHI_HDMI_CLK_CNTL(f11041cc) off

[ 4597.580108@0] clk HHI_MPEG_CLK_CNTL(f1104174) off

[ 4597.580108@0] clk HHI_VDEC_CLK_CNTL(f11041b4) off

[ 4597.580108@0] sleep ...

[ 4597.580108@0] ** disable watchdog

[ 4597.580108@0] power down cpu --

[ 4597.580108@0] ** enable watchdog

[ 4597.580108@0] ... wake up

[ 4597.580108@0] RTCADD3=0x23600000

[ 4597.580108@0] RTCADD3=0x3600000

[ 4597.580108@0] clk HHI_VDEC_CLK_CNTL(f11041b4) on

[ 4597.580108@0] clk HHI_MPEG_CLK_CNTL(f1104174) on

[ 4597.580108@0] clk HHI_HDMI_CLK_CNTL(f11041cc) on

[ 4597.580108@0] clk HHI_AUD_CLK_CNTL(f1104178) on

[ 4597.580108@0] analog on

[ 4597.580108@0] cpufreq resume sleep_freq=96Mhz

[ 4597.580108@0] MMC_LP_CTRL1 before=0x60a80000

[ 4597.580108@0] MMC_LP_CTRL1 after=0x78000030

[ 4597.580108@0] Resume timerA

[ 4597.580108@0] Resume timerB

[ 4597.580108@0] Enabling non-boot CPUs ...

[ 4597.570055@1] CPU1: Booted secondary processor

[ 4597.570055@1] MESON TIMER-D c09630c0

[ 4597.607166@1] Disable timerD

[ 4597.607166@1] CPU1: Unknown IPI message 0x0

[ 4597.617647@0] CPU1 is up

[ 4597.620168@1] Switched to NOHz mode on CPU #1

[ 4597.624744@0] PM: early resume of devices complete after 6.014 msecs

[ 4597.630462@0] enter meson_pm_finish!

[ 4597.635732@0] resume amhdmitx.0+ @ 6189, parent: platform

[ 4597.638444@0] resume power.0+ @ 6189, parent: platform

[ 4597.643762@0] resume reg-dummy+ @ 6189, parent: platform

[ 4597.648940@0] resume aml-i2c.0+ @ 6189, parent: platform

[ 4597.654450@0] resume aml-i2c.1+ @ 6189, parent: platform

[ 4597.659311@0] resume aml-i2c.2+ @ 6189, parent: platform

[ 4597.665406@0] resume mesonuart+ @ 6189, parent: platform

[ 4597.669902@0] resume mesonfb.0+ @ 6189, parent: platform

[ 4597.675563@0] resume mesonfb-ext.0+ @ 6189, parent: platform

[ 4597.681328@0] resume mesonvout.0+ @ 6189, parent: platform

[ 4597.686313@0] resume mesonstream.0+ @ 6189, parent: platform

[ 4597.692224@0] resume aml_nand.0+ @ 6189, parent: platform

[ 4597.697330@0] resume vdin+ @ 6189, parent: platform

[ 4597.702466@0] resume amvdec_656in+ @ 6189, parent: platform

[ 4597.707742@0] resume vm.0+ @ 6189, parent: platform

[ 4597.713131@0] resume AMLOGIC_CARD+ @ 6189, parent: platform

[ 4597.718162@0] resume pm-meson+ @ 6189, parent: platform

[ 4597.723513@0] resume efuse+ @ 6189, parent: platform

[ 4597.728315@0] resume aml_rtc+ @ 6189, parent: platform

[ 4597.733675@0] resume saradc.0+ @ 6189, parent: platform

[ 4597.738647@0] resume m1-adckp.0+ @ 6189, parent: platform

[ 4597.744412@0] resume meson-keyinput.0+ @ 6189, parent: platform

[ 4597.749917@0] key_input resume by power key pressed, reg: 1234abcd

[ 4597.756387@0] wakeup wake lock: event1-182

[ 4597.761338@0] resume aml-audio.0+ @ 6189, parent: platform

[ 4597.765642@0] resume aml-dai.0+ @ 6189, parent: platform

[ 4597.771305@0] resume aml_rt5631_audio.0+ @ 6189, parent: platform

[ 4597.777013@0] resume ppmgr.0+ @ 6189, parent: platform

[ 4597.782257@0] resume mesonvout2.0+ @ 6189, parent: platform

[ 4597.787685@0] resume freescale.0+ @ 6189, parent: platform

[ 4597.793261@0] resume meson-cs-regulator.0+ @ 6189, parent: platform

[ 4597.799404@0] resume cpufreq-meson+ @ 6189, parent: platform

[ 4597.805871@0] resume simdetect.0+ @ 6189, parent: platform

[ 4597.810489@0] resume aml-modem+ @ 6189, parent: platform

[ 4597.815768@0] do aml_modem_resume on ON state

[ 4597.820116@0] MU509 power_on!

[ 4597.820119@0]  modem_enable for MU509 !

[ 4597.874841@0]

[ 4598.575844@0] resume gps_power+ @ 6189, parent: platform

[ 4598.575871@0] resume wifi_power+ @ 6189, parent: platform

[ 4598.581287@0] resume bt-dev+ @ 6189, parent: platform

[ 4598.586190@0] resume mesonlcd.0+ @ 6189, parent: platform

[ 4598.591581@0] resume aml-bl+ @ 6189, parent: platform

[ 4598.596614@0] resume usb1+ @ 6196, parent: lm0

[ 4598.601061@1] resume usb2+ @ 6192, parent: lm1

[ 4598.605464@1] resume i2c-0+ @ 6189, parent: none

[ 4598.610070@1] resume 0-0021+ @ 6189, parent: i2c-0

[ 4598.614834@1] resume 0-003c+ @ 6189, parent: i2c-0

[ 4598.619607@1] resume 0-0038+ @ 6189, parent: i2c-0

[ 4598.624413@1] resume i2c-1+ @ 6189, parent: none

[ 4598.628981@1] resume 1-0068+ @ 6189, parent: i2c-1

[ 4598.633769@1] resume 1-001a+ @ 6189, parent: i2c-1

[ 4598.638530@1] resume i2c-2+ @ 6189, parent: none

[ 4598.643137@1] resume 2-0034+ @ 6189, parent: i2c-2

[ 4598.647905@1] resume axp20-regulator.21+ @ 6189, parent: 2-0034

[ 4598.653822@1] resume axp20-regulator.22+ @ 6189, parent: 2-0034

[ 4598.659709@1] resume axp20-regulator.23+ @ 6189, parent: 2-0034

[ 4598.665619@1] resume axp20-regulator.24+ @ 6189, parent: 2-0034

[ 4598.671523@1] resume axp20-regulator.25+ @ 6189, parent: 2-0034

[ 4598.677416@1] resume axp20-regulator.26+ @ 6189, parent: 2-0034

[ 4598.683324@1] resume axp20-regulator.27+ @ 6189, parent: 2-0034

[ 4598.689220@1] resume axp20-supplyer.28+ @ 6189, parent: 2-0034

[ 4598.696151@1] resume axp20-gpio.29+ @ 6189, parent: 2-0034

[ 4598.700516@1] resume amcanvas+ @ 6189, parent: platform

[ 4598.705714@1] resume regulatory.0+ @ 6189, parent: platform

[ 4598.712542@1] m3 nand resume entered

[ 4598.714867@1] resume input0+ @ 6189, parent: m1-adckp.0

[ 4598.720115@1] resume input1+ @ 6189, parent: meson-keyinput.0

[ 4598.725821@1] resume input2+ @ 6189, parent: axp20-supplyer.28

[ 4598.731631@0] resume 2-1+ @ 6190, parent: usb2

[ 4598.731660@1] resume reg-20-cs-ldo2+ @ 6189, parent: platform

[ 4598.731668@1] resume reg-20-cs-ldo3+ @ 6189, parent: platform

[ 4598.731676@1] resume reg-20-cs-ldo4+ @ 6189, parent: platform

[ 4598.731683@1] resume reg-20-cs-buck2+ @ 6189, parent: platform

[ 4598.731689@1] resume reg-20-cs-buck3+ @ 6189, parent: platform

[ 4598.731695@1] resume reg-20-cs-ldoio0+ @ 6189, parent: platform

[ 4598.731701@1] audiodsp resumed

[ 4598.773782@1] resume alarm+ @ 6189, parent: platform

[ 4598.779382@1] resume boot_monitor+ @ 6189, parent: platform

[ 4598.779758@0] reset gpo !

[ 4598.786921@1] resume snd-soc-dummy+ @ 6189, parent: platform

[ 4598.792522@1] resume soc-audio+ @ 6189, parent: platform

[ 4598.797817@1] enter rt5631_resume_pre

[ 4598.797987@1] resume input3+ @ 6189, parent: card0

[ 4598.802831@1] resume input4+ @ 6189, parent: none

[ 4598.807393@1] resume mali_dev.0+ @ 6189, parent: platform

[ 4598.812690@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_resume

[ 4598.819094@1] resume memorycard0:sdio:1+ @ 6189, parent: memorycard0:sdio

[ 4598.825869@1] bcmsdh_sdmmc_resume

[ 4598.829154@1] resume memorycard0:sdio:2+ @ 6189, parent: memorycard0:sdio

[ 4598.835933@1] bcmsdh_sdmmc_resume

[ 4598.839212@1] dhd resume, late probe bcmsdh

[ 4598.839233@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_resume

[ 4598.845724@1] PM: resume of devices complete after 1212.821 msecs

[ 4598.853100@1] Restarting tasks ...

[ 4598.855182@0] usb 2-1: USB disconnect, device number 6

[ 4598.872122@0] request_suspend_state: wakeup (3->0) at 4598872073000 (2013-01-31 12:13:55.647863001 UTC)

[ 4598.874440@1] done.

[ 4598.906757@0] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0

[ 4598.909622@0] option 2-1:1.0: device disconnected

[ 4598.923685@0] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1

[ 4598.916738@1] mali_meson_poweron: Interrupt received.

[ 4598.931688@0] option 2-1:1.1: device disconnected

[ 4598.938212@0] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2

[ 4598.944508@0] option 2-1:1.2: device disconnected

[ 4598.951263@0] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3

[ 4598.957269@0] option 2-1:1.3: device disconnected

[ 4598.963961@0] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4

[ 4598.970185@0] option 2-1:1.4: device disconnected

[ 4598.989605@0] enter rt5631_set_bias_level level: 2

[ 4598.989837@0] enter rt5631_set_bias_level level: 2

[ 4598.995504@1] enter rt5631_set_bias_level level: 3

[ 4598.998773@1] enter rt5631_set_bias_level level: 3

[ 4598.999435@1] ***Entered sound/soc/aml/aml_dai.c:aml_dai_i2s_resume

[ 4599.001162@1] enter rt5631_resume_post

[ 4599.001380@1] ** disable watchdog

[ 4599.003484@1] suspend: exit suspend, ret = 0 (2013-01-31 12:13:55.779260001 UTC)

[ 4599.023123@1] late clk HHI_VIID_CLK_CNTL(f110412c) on

[ 4599.023217@1] late clk HHI_VID_CLK_CNTL(f110417c) on

[ 4599.043631@1] sys_resume

[ 4599.043689@1] DWC_OTG: going early resume

[ 4599.044631@1] DWC_OTG: going early resume

[ 4599.049016@1] osd_ext_resumed

[ 4599.053431@1] osd_resumed

[ 4599.089839@0] BT_RADIO going: on

[ 4599.089861@0] BCM_BT: going ON

[ 4599.090136@1] rt5631 hp unpluged

[ 4599.160067@1] bcmsdh_sdmmc_late_resume: enter

[ 4599.160080@1] schedule sdioinfo->tqueue

[ 4599.160095@1] bcmsdh_sdmmc_late_resume: enter

[ 4599.160523@1] ==ft5x0x_ts_resume=

[ 4599.160539@1] enter -----> aml_gt2005_late_resume

[ 4599.160545@1] aml_m1_nand_early resume entered

[ 4599.160549@1] aml_m1_nand_early resume entered

[ 4599.160555@1] lcd_resume

[ 4599.160560@1]

[ 4599.160562@1] Init LCD type: LVDS.

[ 4599.160566@1] lcd frame rate=603/10.

[ 4599.160574@1] set_pll_lvds

[ 4599.160580@1] ss_level=0, pll_sel=1, pll_div_sel=1, vclk_sel=1, pll_reg=0x1023d, div_reg=0x1e913, xd=1.

[ 4599.160585@1] setup lcd clk.

[ 4599.161607@1] call bcmsdh_probe

[ 4599.161613@1] [extern_wifi_set_enable] in

[ 4599.161638@1] WIFI  Disable!

[ 4599.161841@1] [extern_wifi_set_enable] in

[ 4599.161850@1] WIFI  Enable!

[ 4599.170068@0] Changing baud for line 1 from 2000000 to 115200

[ 4599.180075@1] venc_set_lvds

[ 4599.180086@1] set_control_lvds

[ 4599.180091@1] init_lvds_phy

[ 4599.210087@0] Changing baud for line 1 from 115200 to 2000000

[ 4599.250772@0] sd_mmc_info->card_type=0

[ 4599.250781@0] begin SDIO check ......

[ 4599.263032@0] m6g02_d7_lcd_power_ctrl() Power ON

[ 4599.273373@0] sdio_timeout_int_times = 0; timeout = 498

[ 4599.295972@0] sdio_timeout_int_times = 0; timeout = 498

[ 4599.295979@0] SEND OP timeout @1

[ 4599.296181@0] begin SD&SDHC check ......

[ 4599.310935@0] set type to SDHC

[ 4599.320543@0] m6g02_d7_lvds_ports_ctrl: ON

[ 4599.320556@0] m6g02_d7_backlight_power_ctrl() Power ON

[ 4599.580176@0] Changing baud for line 1 from 2000000 to 115200

[ 4599.686540@0] Changing baud for line 1 from 115200 to 2000000

[ 4599.770856@0] S18A : 0

[ 4599.806505@0] init timer

[ 4599.830681@0] Got RCA = 4660

[ 4599.831496@0]

[ 4599.831507@0] ***********CID*************

[ 4599.833677@0] 02:54:4d:53:41:30:38:47:04:9c:00:00:58:00:a2:00:

[ 4599.843982@0] MID[8]=2

[ 4599.844044@0] OID[16]=TM

[ 4599.844355@0] PNM[40]=SA08G

[ 4599.847127@0] PRV[8]=4

[ 4599.849483@0] PSN[32]=0x5800009c

[ 4599.853166@0] Reserved[4]=0

[ 4599.856634@0] year[8].month[4]=2010.2

[ 4599.860409@0] NotUsed[1]=0

[ 4599.861800@0] CRC[7]=0

[ 4599.861811@0]

[ 4599.866582@0]

[ 4599.866597@0] ********** CSD v2 **************

[ 4599.872805@0] 40:0e:00:32:5b:59:00:00:3b:67:7f:80:0a:40:00:00:

[ 4599.877506@0] CSD_STRUCTURE[2]=1

[ 4599.881012@0] Reserved1[6]=0

[ 4599.883769@0] TAAC[8]=14

[ 4599.886272@0] NSAC[8]=0

[ 4599.888718@0] TRAN_SPEED[8]=50

[ 4599.892878@0] CCC[8+4]=0x5b5

[ 4599.894682@0] READ_BL_LEN[4]=9

[ 4599.899508@0] READ_BL_PARTIAL[1]=0

[ 4599.901233@0] WRITE_BLK_MISALIGN[1]=0

[ 4599.904684@0] READ_BLK_MISALIGN[1]=0

[ 4599.908240@0] DSR_IMP[1]=0

[ 4599.911061@0] Reserved2[4]=0

[ 4599.913795@0] Reserved3[2]=0

[ 4599.916663@0] C_SIZE[6+8+8]=15207

[ 4599.919964@0] Reserved4[1]=0

[ 4599.923157@0] ERASE_BLK_EN[1]=1

[ 4599.926015@0] SECTOR_SIZE[6+1]=127

[ 4599.929584@0] WP_GRP_SIZE[7]=0

[ 4599.932648@0] WP_GRP_ENABLE[1]=0

[ 4599.935720@0] Reserved5[2]=0

[ 4599.938440@0] R2W_FACTOR[3]=2

[ 4599.941650@0] WRITE_BL_LEN[2+2]=9

[ 4599.944731@0] WRITE_BL_PARTIAL[1]=0

[ 4599.948162@0] Reserved6[5]=0

[ 4599.951267@0] FILE_FORMAT_GRP[1]=0

[ 4599.954411@0] COPY[1]=0

[ 4599.956841@0] PERM_WRITE_PROTECT[1]=0

[ 4599.962986@0] TMP_WRITE_PROTECT[1]=0

[ 4599.964049@0] FILE_FORMAT[2]=0

[ 4599.967084@0] Reserved7[2]=0

[ 4599.969947@0] CRC[7]=0

[ 4599.972372@0] NotUsed[1]=0

[ 4599.972383@0]

[ 4599.977115@0] total block nums : 0xeda000(15572992)

[ 4599.982915@0]

[ 4599.982926@0] ***********SCR*************

[ 4599.987135@0] 02:35:80:00:01:00:00:00:

[ 4599.990692@0] SD_SPEC[4]=2

[ 4599.993577@0] SCR_STRUCTURE[4]=0

[ 4599.996768@0] SD_BUS_WIDTHS[4]=5

[ 4600.000740@0] SD_SECURITY[3]=3

[ 4600.003073@0] DATA_STAT_AFTER_ERASE[1]=0

[ 4600.006953@0] Rsv1[7]=0

[ 4600.010034@1] SD_SPEC3[1]=1

[ 4600.012134@1] CMD_SUPPORT[2]=0

[ 4600.015218@1] Rsv2[6]=0

[ 4600.017600@1] Reserved2[32]=1

[ 4600.017603@1]

[ 4600.024146@0] 00648001 80018001 80018001 80030000

[ 4600.026971@0] 01000000 00000000 00000000 00000000

[ 4600.031746@0] 00000000 00000000 00000000 00000000

[ 4600.036519@0] 00000000 00000000 00000000 00000000

[ 4600.041295@0]

[ 4600.041297@0] ****************switch status****************

[ 4600.048508@0] Data_Struction_Verion : 0

[ 4600.052329@0] Max_Current_Consumption : 100

[ 4600.056484@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 4600.061006@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 4600.065511@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 4600.070166@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 4600.074537@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 4600.079051@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 4600.084074@0] Function_Group_Status6 : 0

[ 4600.087472@0] Function_Group_Status5 : 0

[ 4600.091434@0] Function_Group_Status4 : 0

[ 4600.095295@0] Function_Group_Status3 : 0

[ 4600.099189@0] Function_Group_Status2 : 0

[ 4600.103698@0] Function_Group_Status1 : 1

[ 4600.103702@0]

[ 4600.109660@0] 00648001 80018001 80018001 80030000

[ 4600.113424@0] 01000000 00000000 00000000 00000000

[ 4600.118198@0] 00000000 00000000 00000000 00000000

[ 4600.122972@0] 00000000 00000000 00000000 00000000

[ 4600.127746@0]

[ 4600.127749@0] ****************switch status****************

[ 4600.135090@0] Data_Struction_Verion : 0

[ 4600.138770@0] Max_Current_Consumption : 100

[ 4600.142952@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 4600.147451@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 4600.151964@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 4600.156477@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 4600.161141@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 4600.165504@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 4600.170496@0] Function_Group_Status6 : 0

[ 4600.173924@0] Function_Group_Status5 : 0

[ 4600.177841@0] Function_Group_Status4 : 0

[ 4600.181770@0] Function_Group_Status3 : 0

[ 4600.185642@0] Function_Group_Status2 : 0

[ 4600.189548@0] Function_Group_Status1 : 1

[ 4600.189550@0]

[ 4600.195256@0] monitor : resume

[ 4600.195309@1] [extern_wifi_set_enable] in

[ 4600.195322@1] WIFI  Enable!

[ 4600.630333@1] sd_mmc_info->card_type=0

[ 4600.630399@1] begin SDIO check ......

[ 4600.702664@1] Got RCA = 1

[ 4600.704149@1] =========== WLAN placed in POWER ON ========

[ 4600.715342@1] dhd_customer_oob_irq_map: customer specific Host GPIO number is (101)

[ 4600.731515@1] F1 signature read @0x18000000=0x16044330

[ 4600.815343@1] DHD: dongle ram size is set to 294912(orig 294912)

[ 4600.815398@1] dhd_bus_select_firmware_name_by_chip: firmware_path=/system/etc/wifi/40183/fw_bcm40183b2.bin

[ 4600.819079@1] wl_create_event_handler thr:189f started

[ 4600.819671@1] wl_iw_attach thr:18a0 started

[ 4600.819750@1] wl_iw_bt_init thr:18a1 started

[ 4600.819820@1] dhd_attach thr:18a2 started

[ 4600.819866@1] dhd_attach thr:18a3 started

[ 4600.819912@1] dhd_attach thr:18a4 started

[ 4600.820619@1] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33

[ 4600.820630@1] [extern_wifi_set_enable] in

[ 4600.820655@1] WIFI  Disable!

[ 4600.820659@1] =========== WLAN placed in RESET ========

[ 4600.820972@1] dhd_bus_select_firmware_name_by_chip: firmware_path=/system/etc/wifi/40183/fw_bcm40183b2.bin

[ 4600.820984@1]

[ 4600.820986@1] Dongle Host Driver, version 5.90.195.26.1.6.1

[ 4600.820989@1] Compiled in drivers/net/wireless/bcmdhd on Jan 30 2013 at 18:00:05

[ 4600.820995@1] wl_android_wifi_on in

[ 4600.820999@1] [extern_wifi_set_enable] in

[ 4600.821013@1] WIFI  Disable!

[ 4600.821217@1] [extern_wifi_set_enable] in

[ 4600.821228@1] WIFI  Enable!

[ 4600.821450@1] [extern_wifi_set_enable] in

[ 4600.821461@1] WIFI  Enable!

[ 4601.047648@0] del timer

[ 4601.350622@0] sd_mmc_info->card_type=0

[ 4601.350634@0] begin SDIO check ......

[ 4601.410300@1] Indeed it is in host mode hprt0 = 00021501

[ 4601.413370@0] Got RCA = 1

[ 4601.414616@0] =========== WLAN going back to live  ========

[ 4601.433624@0] F1 signature read @0x18000000=0x16044330

[ 4601.531461@0] DHD: dongle ram size is set to 294912(orig 294912)

[ 4601.532205@0] dhd_bus_select_firmware_name_by_chip: firmware_path=/system/etc/wifi/40183/fw_bcm40183b2.bin

[ 4601.640144@1] usb 2-1: new high speed USB device number 7 using dwc_otg

[ 4601.641832@1] Indeed it is in host mode hprt0 = 00001101

[ 4601.657902@0] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.

[ 4601.831736@0] bcmsdh_register_oob_intr Enter

[ 4601.831751@0] bcmsdh_register_oob_intr IRQ=101 Type=411

[ 4601.838970@0] Firmware up: op_mode=1, Broadcom Dongle Host Driver mac=00:22:f4:1d:c2:2b

[ 4601.893027@0] usb 2-1: New USB device found, idVendor=19f5, idProduct=9013

[ 4601.893038@0] usb 2-1: New USB device strings: Mfr=4, Product=3, SerialNumber=0

[ 4601.893044@0] usb 2-1: Product: Qualcomm CDMA Technologies MSM

[ 4601.893050@0] usb 2-1: Manufacturer: Qualcomm, Incorporated

[ 4601.898006@0] option 2-1:1.0: GSM modem (1-port) converter detected

[ 4601.899106@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0

[ 4601.904415@1] option 2-1:1.1: GSM modem (1-port) converter detected

[ 4601.905508@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1

[ 4601.949980@1] dhd_rx_frame: net device is NOT registered yet. drop packet

[ 4601.952514@1] dhd_rx_frame: net device is NOT registered yet. drop packet

[ 4601.960596@1] option 2-1:1.2: GSM modem (1-port) converter detected

[ 4601.960776@0] Firmware version = wl0: Mar 27 2012 17:31:15 version 5.90.195.26.1 FWID 01-7a1206eb

[ 4601.978126@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2

[ 4601.979926@0] option 2-1:1.3: GSM modem (1-port) converter detected

[ 4601.991648@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3

[ 4602.001802@0] option 2-1:1.4: GSM modem (1-port) converter detected

[ 4602.004295@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB4

[ 4602.045729@0] Unknown PRIVATE command BTCOEXSCAN-STOP - ignored

[ 4602.046060@0] Unknown PRIVATE command RXFILTER-ADD 3 - ignored

[ 4602.046166@0] Unknown PRIVATE command RXFILTER-START - ignored

[ 4602.046266@0] Unknown PRIVATE command RXFILTER-STOP - ignored

[ 4602.046351@0] Unknown PRIVATE command RXFILTER-REMOVE 2 - ignored

[ 4602.046425@0] Unknown PRIVATE command RXFILTER-START - ignored

[ 4602.081172@1] wl_iw_set_country: set country for RU as RU rev -1 is OK

[ 4602.833260@0] wl_iw_set_wpaauth: 5962: setting wpa_auth to 0xc0

[ 4602.840548@1] wl_iw_set_essid: join SSID=153 ch=1

[ 4602.929827@1] wl_bss_connect_done succeeded

[ 4603.052436@1] wl_bss_connect_done succeeded

[ 4612.940105@1] wlan0: no IPv6 routers present

[ 4624.533316@1] wl_iw_set_country: set country for RU as RU rev -1 is OK

[ 4625.303430@1] wl_iw_set_wpaauth: 5962: setting wpa_auth to 0xc0

[ 4625.318138@1] wl_iw_set_essid: join SSID=153 ch=1

[ 4625.399826@1] wl_bss_connect_done succeeded

[ 4625.448153@0] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[ 4625.476955@1] wl_bss_connect_done succeeded

[ 4625.493540@0] wl_iw_set_btcoex_dhcp was called w/o DHCP OFF. Continue

[ 4634.547513@1] wl_iw_set_wpaauth: 5962: setting wpa_auth to 0xc0

[ 4634.558693@1] wl_iw_set_essid: join SSID=153 ch=1

[ 4634.639340@1] wl_bss_connect_done succeeded

[ 4634.696267@1] wl_bss_connect_done succeeded

[ 4634.697937@1] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[ 4645.160065@0] wlan0: no IPv6 routers present

[ 4650.079849@1] init timer

[ 4656.080109@1] no date transfer occure in 6s

[ 4662.100102@1] no date transfer occure in 6s

[ 4668.120050@1] no date transfer occure in 6s

[ 4674.140091@1] no date transfer occure in 6s

[ 4680.160097@1] no date transfer occure in 6s

[ 4681.814014@1] wl_iw_set_wpaauth: 5962: setting wpa_auth to 0xc0

[ 4681.830299@1] wl_iw_set_essid: join SSID=153 ch=1

[ 4681.909183@1] wl_bss_connect_done succeeded

[ 4681.994085@1] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[ 4681.997930@1] wl_bss_connect_done succeeded

[ 4686.180038@1] no date transfer occure in 6s

[ 4692.200039@1] no date transfer occure in 6s

[ 4692.390046@1] wlan0: no IPv6 routers present

[ 4698.220037@1] no date transfer occure in 6s

[ 4704.240063@1] no date transfer occure in 6s

[ 4710.260048@1] no date transfer occure in 6s

[ 4716.280035@1] no date transfer occure in 6s

[ 4722.300035@1] no date transfer occure in 6s

[ 4728.320123@1] no date transfer occure in 6s

[ 4734.340041@1] no date transfer occure in 6s

[ 4740.360035@1] no date transfer occure in 6s

[ 4746.380039@1] no date transfer occure in 6s

[ 4752.400043@1] no date transfer occure in 6s

[ 4758.420036@1] no date transfer occure in 6s

[ 4764.440044@1] no date transfer occure in 6s

[ 4770.460063@1] no date transfer occure in 6s

[ 4776.480040@1] no date transfer occure in 6s

[ 4782.500132@1] no date transfer occure in 6s

[ 4788.520013@1] no date transfer occure in 6s

[ 4794.540185@1] no date transfer occure in 6s

[ 4800.570106@1] no date transfer occure in 6s

[ 4806.580144@1] no date transfer occure in 6s

[ 4812.600122@1] no date transfer occure in 6s

[ 4818.620163@1] no date transfer occure in 6s

[ 4824.640204@1] no date transfer occure in 6s

[ 4828.200512@0] === key 116 down ===

[ 4828.400695@0] === key 116 up ===

[ 4828.419925@0] request_suspend_state: sleep (0->3) at 4828419886999 (2013-01-31 12:17:45.195674000 UTC)

[ 4828.424053@0] lcd_suspend

[ 4828.426475@0] m6g02_d7_backlight_power_ctrl() Power OFF

[ 4828.437116@0] m6g02_d7_lcd_power_ctrl() Power OFF

[ 4828.670165@0] m6g02_d7_lvds_ports_ctrl: OFF

[ 4829.220107@0] disable lcd display driver.

[ 4829.220172@0] enter -----> aml_gt2005_early_suspend

[ 4829.220190@0] enter -----> aml_gc0308_early_suspend

[ 4829.250090@0] ==ft5x0x_ts_suspend=

[ 4829.250898@0] net_ratelimit: 2 callbacks suppressed

[ 4829.250927@0] dhd_set_suspend: force extra Suspend setting

[ 4829.254707@0] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=1 Listen=10

[ 4829.255736@0] bcmsdh_sdmmc_early_suspend: enter

[ 4829.255757@0] bcmsdh_sdmmc_early_suspend: enter

[ 4830.257446@0] osd_suspended

[ 4830.257484@0] osd_ext_suspended

[ 4830.257503@0] DWC_OTG: going early suspend! is_mount=0

[ 4830.257522@0] DWC_OTG: going early suspend! is_mount=0

[ 4830.257551@0] sys_suspend

[ 4830.257659@0] early clk HHI_VID_CLK_CNTL(f110417c) off

[ 4830.257690@0] early clk HHI_VIID_CLK_CNTL(f110412c) off

[ 4830.660038@1] no date transfer occure in 6s

[ 4830.688623@1] del timer

[ 4831.302842@1] BT_RADIO going: off

[ 4831.302946@1] BCM_BT: going OFF

[ 4833.443071@1] PM: Syncing filesystems ... done.

[ 4833.462143@1] Freezing user space processes ... (elapsed 0.04 seconds) done.

[ 4833.511529@1] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

[ 4833.545069@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_suspend

[ 4833.545949@0] suspend 2-1+ @ 6199, parent: usb2

[ 4833.546279@0] option: option_instat_callback: error -2

[ 4833.546513@0] option: option_instat_callback: error -2

[ 4833.561363@1] suspend memorycard0:sdio:2+ @ 6204, parent: memorycard0:sdio

[ 4833.567780@1] bcmsdh_sdmmc_suspend

[ 4833.571277@1] dhd suspend, remove bcmsdh

[ 4833.572413@1] wl_iw_detach thr:18a0 terminated OK

[ 4833.576360@1] wl_iw_bt_release thr:18a1 terminated OK

[ 4833.581490@1] dhd_detach thr:18a4 terminated OK

[ 4833.585765@1] wl_android_wifi_off in

[ 4833.601280@1] bcmsdh_set_irq Flag = 0

[ 4833.602110@1] [extern_wifi_set_enable] in

[ 4833.603580@1] WIFI  Disable!

[ 4833.606397@1] =========== WLAN placed in RESET ========

[ 4833.701123@1] dhd_detach thr:18a2 terminated OK

[ 4833.701813@1] dhd_detach thr:18a3 terminated OK

[ 4833.704715@1] bcmsdh_unregister_oob_intr: Enter

[ 4833.710342@1] CFG80211-ERROR) wl_event_handler : wl_event_handler was terminated

[ 4833.717078@1] wl_destroy_event_handler thr:189f terminated OK

[ 4833.761026@1] dhd_osl_detach: MEMORY LEAK 856 bytes

[ 4833.782286@0] sdio_timeout_int_times = 0; timeout = 498

[ 4833.782539@0] sdio card read_reg failed 21 at addr: 2

[ 4833.808283@0] sdio_timeout_int_times = 0; timeout = 498

[ 4833.808643@0] sdio card read_reg failed 21 at addr: 2

[ 4833.813488@0] suspend memorycard0:sdio:1+ @ 6204, parent: memorycard0:sdio

[ 4833.820520@0] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_suspend

[ 4833.826680@0] suspend mali_dev.0+ @ 6204, parent: platform

[ 4833.832861@0] suspend input4+ @ 6204, parent: none

[ 4833.836950@0] suspend input3+ @ 6204, parent: card0

[ 4833.841993@0] suspend soc-audio+ @ 6204, parent: platform

[ 4833.847164@0] enter rt5631_suspend_pre

[ 4833.847251@0] ***Entered sound/soc/aml/aml_dai.c:aml_dai_i2s_suspend

[ 4833.856102@0] enter rt5631_set_bias_level level: 2

[ 4833.856598@0] enter rt5631_set_bias_level level: 2

[ 4833.857573@0] enter rt5631_set_bias_level level: 1

[ 4833.857748@0] enter rt5631_set_bias_level level: 1

[ 4833.860951@0] enter rt5631_suspend_post

[ 4833.861094@0] suspend snd-soc-dummy+ @ 6204, parent: platform

[ 4833.862156@0] suspend usb2+ @ 6189, parent: lm1

[ 4833.866611@0] suspend boot_monitor+ @ 6204, parent: platform

[ 4833.871747@0] suspend usb1+ @ 6189, parent: lm0

[ 4833.876284@0] suspend alarm+ @ 6204, parent: platform

[ 4833.940394@0] audiodsp suspend

[ 4833.940734@0] suspend reg-20-cs-ldoio0+ @ 6204, parent: platform

[ 4833.943997@0] suspend reg-20-cs-buck3+ @ 6204, parent: platform

[ 4833.949897@0] suspend reg-20-cs-buck2+ @ 6204, parent: platform

[ 4833.955930@0] suspend reg-20-cs-ldo4+ @ 6204, parent: platform

[ 4833.961709@0] suspend reg-20-cs-ldo3+ @ 6204, parent: platform

[ 4833.967424@0] suspend reg-20-cs-ldo2+ @ 6204, parent: platform

[ 4833.973682@0] suspend input2+ @ 6204, parent: axp20-supplyer.28

[ 4833.979358@0] suspend input1+ @ 6204, parent: meson-keyinput.0

[ 4833.985144@0] suspend input0+ @ 6204, parent: m1-adckp.0

[ 4833.991195@0] m3 nand suspend entered

[ 4834.121884@0] suspend regulatory.0+ @ 6204, parent: platform

[ 4834.122225@0] suspend amcanvas+ @ 6204, parent: platform

[ 4834.127471@0] suspend axp20-gpio.29+ @ 6204, parent: 2-0034

[ 4834.133166@0] suspend axp20-supplyer.28+ @ 6204, parent: 2-0034

[ 4834.140946@0] suspend axp20-regulator.27+ @ 6204, parent: 2-0034

[ 4834.144864@0] suspend axp20-regulator.26+ @ 6204, parent: 2-0034

[ 4834.151261@0] suspend axp20-regulator.25+ @ 6204, parent: 2-0034

[ 4834.156840@0] suspend axp20-regulator.24+ @ 6204, parent: 2-0034

[ 4834.162953@0] suspend axp20-regulator.23+ @ 6204, parent: 2-0034

[ 4834.168816@0] suspend axp20-regulator.22+ @ 6204, parent: 2-0034

[ 4834.174918@0] suspend axp20-regulator.21+ @ 6204, parent: 2-0034

[ 4834.181170@0] suspend 2-0034+ @ 6204, parent: i2c-2

[ 4834.185669@0] suspend i2c-2+ @ 6204, parent: none

[ 4834.190470@0] suspend 1-001a+ @ 6204, parent: i2c-1

[ 4834.195204@0] suspend 1-0068+ @ 6204, parent: i2c-1

[ 4834.200371@0] suspend i2c-1+ @ 6204, parent: none

[ 4834.204753@0] suspend 0-0038+ @ 6204, parent: i2c-0

[ 4834.209607@0] suspend 0-003c+ @ 6204, parent: i2c-0

[ 4834.214913@0] suspend 0-0021+ @ 6204, parent: i2c-0

[ 4834.219353@0] suspend i2c-0+ @ 6204, parent: none

[ 4834.224213@0] suspend aml-bl+ @ 6204, parent: platform

[ 4834.229141@0] suspend mesonlcd.0+ @ 6204, parent: platform

[ 4834.234758@0] suspend bt-dev+ @ 6204, parent: platform

[ 4834.239733@0] suspend wifi_power+ @ 6204, parent: platform

[ 4834.245592@0] suspend gps_power+ @ 6204, parent: platform

[ 4834.250690@0] suspend aml-modem+ @ 6204, parent: platform

[ 4834.255922@0] do aml_modem_suspend

[ 4834.259393@0] MU509 power_off!

[ 4834.259425@0]  modem_disable for MU509 !

[ 4834.264290@0]

[ 4834.268162@0] suspend simdetect.0+ @ 6204, parent: platform

[ 4834.274213@0] suspend cpufreq-meson+ @ 6204, parent: platform

[ 4834.279582@0] suspend meson-cs-regulator.0+ @ 6204, parent: platform

[ 4834.286027@0] suspend freescale.0+ @ 6204, parent: platform

[ 4834.291562@0] suspend mesonvout2.0+ @ 6204, parent: platform

[ 4834.297104@0] suspend ppmgr.0+ @ 6204, parent: platform

[ 4834.302710@0] suspend aml_rt5631_audio.0+ @ 6204, parent: platform

[ 4834.308475@0] suspend aml-dai.0+ @ 6204, parent: platform

[ 4834.314018@0] suspend aml-audio.0+ @ 6204, parent: platform

[ 4834.319420@0] suspend meson-keyinput.0+ @ 6204, parent: platform

[ 4834.325628@0] suspend m1-adckp.0+ @ 6204, parent: platform

[ 4834.331222@0] suspend saradc.0+ @ 6204, parent: platform

[ 4834.336171@0] suspend aml_rtc+ @ 6204, parent: platform

[ 4834.341518@0] suspend efuse+ @ 6204, parent: platform

[ 4834.346408@0] suspend pm-meson+ @ 6204, parent: platform

[ 4834.351820@0] suspend AMLOGIC_CARD+ @ 6204, parent: platform

[ 4834.357342@0] suspend vm.0+ @ 6204, parent: platform

[ 4834.362640@0] suspend amvdec_656in+ @ 6204, parent: platform

[ 4834.367931@0] suspend vdin+ @ 6204, parent: platform

[ 4834.372998@0] suspend aml_nand.0+ @ 6204, parent: platform

[ 4834.378348@0] suspend mesonstream.0+ @ 6204, parent: platform

[ 4834.384186@0] suspend mesonvout.0+ @ 6204, parent: platform

[ 4834.389651@0] suspend mesonfb-ext.0+ @ 6204, parent: platform

[ 4834.395730@0] suspend mesonfb.0+ @ 6204, parent: platform

[ 4834.401411@0] suspend mesonuart+ @ 6204, parent: platform

[ 4834.406109@0] suspend aml-i2c.2+ @ 6204, parent: platform

[ 4834.411580@0] suspend aml-i2c.1+ @ 6204, parent: platform

[ 4834.416869@0] suspend aml-i2c.0+ @ 6204, parent: platform

[ 4834.422560@0] suspend reg-dummy+ @ 6204, parent: platform

[ 4834.427632@0] suspend power.0+ @ 6204, parent: platform

[ 4834.432991@0] suspend amhdmitx.0+ @ 6204, parent: platform

[ 4834.438502@0] PM: suspend of devices complete after 894.349 msecs

[ 4834.444455@0] enter meson_pm_prepare!

[ 4834.452304@0] PM: late suspend of devices complete after 4.261 msecs

[ 4834.454348@0] Disabling non-boot CPUs ...

[ 4834.459866@1] IRQ61 no longer affine to CPU1

[ 4834.460502@1] Disable timerD

[ 4834.461160@0] CPU1: shutdown

[ 4834.472191@0] Disable timerB

[ 4834.472314@0] Disable timerA

[ 4834.474060@0] MMC_LP_CTRL1 before=0x78000030

[ 4834.478300@0] MMC_LP_CTRL1 after=0x60a80000

[ 4834.480060@0] cpufreq suspend sleep_freq=144Mhz max=1320MHz

[ 4834.480060@0] enter meson_pm_suspend!

[ 4834.480060@0] ** enable watchdog

[ 4834.480060@0] target ddr clock 0x8001082b!

[ 4834.480060@0] analog off

[ 4834.480060@0] SAR_ADC(0xf110868c):0xc3a8500a & ~0x40200000 | 0x10000000 = 0x9388500a

[ 4834.480060@0] LED_PWM_REG0(0xf1108768):0x63100f & ~0x1000 | 0x2000 = 0x63100f

[ 4834.480060@0] clk HHI_AUD_CLK_CNTL(f1104178) off

[ 4834.480060@0] clk HHI_HDMI_CLK_CNTL(f11041cc) off

[ 4834.480060@0] clk HHI_MPEG_CLK_CNTL(f1104174) off

[ 4834.480060@0] clk HHI_VDEC_CLK_CNTL(f11041b4) off

[ 4834.480060@0] sleep ...

[ 4834.480060@0] ** disable watchdog

[ 4834.480060@0] power down cpu --

[ 4834.480060@0] ** enable watchdog

[ 4834.480060@0] ... wake up

[ 4834.480060@0] RTCADD3=0x23600000

[ 4834.480060@0] RTCADD3=0x3600000

[ 4834.480060@0] clk HHI_VDEC_CLK_CNTL(f11041b4) on

[ 4834.480060@0] clk HHI_MPEG_CLK_CNTL(f1104174) on

[ 4834.480060@0] clk HHI_HDMI_CLK_CNTL(f11041cc) on

[ 4834.480060@0] clk HHI_AUD_CLK_CNTL(f1104178) on

[ 4834.480060@0] analog on

[ 4834.480060@0] cpufreq resume sleep_freq=144Mhz

[ 4834.480060@0] MMC_LP_CTRL1 before=0x60a80000

[ 4834.480060@0] MMC_LP_CTRL1 after=0x78000030

[ 4834.480060@0] Resume timerA

[ 4834.480060@0] Resume timerB

[ 4834.480060@0] Enabling non-boot CPUs ...

[ 4834.469627@1] CPU1: Booted secondary processor

[ 4834.469627@1] MESON TIMER-D c09630c0

[ 4834.505366@1] Disable timerD

[ 4834.505366@1] CPU1: Unknown IPI message 0x0

[ 4834.515728@0] CPU1 is up

[ 4834.520140@1] Switched to NOHz mode on CPU #1

[ 4834.521059@0] PM: early resume of devices complete after 3.995 msecs

[ 4834.521777@0] enter meson_pm_finish!

[ 4834.522987@0] resume amhdmitx.0+ @ 6204, parent: platform

[ 4834.523050@0] resume power.0+ @ 6204, parent: platform

[ 4834.523105@0] resume reg-dummy+ @ 6204, parent: platform

[ 4834.523170@0] resume aml-i2c.0+ @ 6204, parent: platform

[ 4834.523223@0] resume aml-i2c.1+ @ 6204, parent: platform

[ 4834.523269@0] resume aml-i2c.2+ @ 6204, parent: platform

[ 4834.523315@0] resume mesonuart+ @ 6204, parent: platform

[ 4834.523363@0] resume mesonfb.0+ @ 6204, parent: platform

[ 4834.523417@0] resume mesonfb-ext.0+ @ 6204, parent: platform

[ 4834.523470@0] resume mesonvout.0+ @ 6204, parent: platform

[ 4834.523521@0] resume mesonstream.0+ @ 6204, parent: platform

[ 4834.523570@0] resume aml_nand.0+ @ 6204, parent: platform

[ 4834.523621@0] resume vdin+ @ 6204, parent: platform

[ 4834.523668@0] resume amvdec_656in+ @ 6204, parent: platform

[ 4834.523717@0] resume vm.0+ @ 6204, parent: platform

[ 4834.523764@0] resume AMLOGIC_CARD+ @ 6204, parent: platform

[ 4834.523811@0] resume pm-meson+ @ 6204, parent: platform

[ 4834.523858@0] resume efuse+ @ 6204, parent: platform

[ 4834.523904@0] resume aml_rtc+ @ 6204, parent: platform

[ 4834.523951@0] resume saradc.0+ @ 6204, parent: platform

[ 4834.524000@0] resume m1-adckp.0+ @ 6204, parent: platform

[ 4834.524049@0] resume meson-keyinput.0+ @ 6204, parent: platform

[ 4834.524096@0] key_input resume by alarm event, reg: 12345678

[ 4834.524158@0] resume aml-audio.0+ @ 6204, parent: platform

[ 4834.524209@0] resume aml-dai.0+ @ 6204, parent: platform

[ 4834.524258@0] resume aml_rt5631_audio.0+ @ 6204, parent: platform

[ 4834.524307@0] resume ppmgr.0+ @ 6204, parent: platform

[ 4834.524355@0] resume mesonvout2.0+ @ 6204, parent: platform

[ 4834.524402@0] resume freescale.0+ @ 6204, parent: platform

[ 4834.524451@0] resume meson-cs-regulator.0+ @ 6204, parent: platform

[ 4834.524501@0] resume cpufreq-meson+ @ 6204, parent: platform

[ 4834.524550@0] resume simdetect.0+ @ 6204, parent: platform

[ 4834.524598@0] resume aml-modem+ @ 6204, parent: platform

[ 4834.524636@0] do aml_modem_resume on ON state

[ 4834.524670@0] MU509 power_on!

[ 4834.524690@0]  modem_enable for MU509 !

[ 4834.575877@0]

[ 4835.403122@1] resume gps_power+ @ 6204, parent: platform

[ 4835.403414@1] resume wifi_power+ @ 6204, parent: platform

[ 4835.408535@1] resume bt-dev+ @ 6204, parent: platform

[ 4835.413665@1] resume mesonlcd.0+ @ 6204, parent: platform

[ 4835.418955@1] resume aml-bl+ @ 6204, parent: platform

[ 4835.424181@0] resume usb1+ @ 6189, parent: lm0

[ 4835.424262@1] resume usb2+ @ 6180, parent: lm1

[ 4835.424418@1] resume i2c-0+ @ 6204, parent: none

[ 4835.424505@1] resume 0-0021+ @ 6204, parent: i2c-0

[ 4835.424590@1] resume 0-003c+ @ 6204, parent: i2c-0

[ 4835.424671@1] resume 0-0038+ @ 6204, parent: i2c-0

[ 4835.424750@1] resume i2c-1+ @ 6204, parent: none

[ 4835.424822@1] resume 1-0068+ @ 6204, parent: i2c-1

[ 4835.424939@1] resume 1-001a+ @ 6204, parent: i2c-1

[ 4835.425018@1] resume i2c-2+ @ 6204, parent: none

[ 4835.425089@1] resume 2-0034+ @ 6204, parent: i2c-2

[ 4835.425167@1] resume axp20-regulator.21+ @ 6204, parent: 2-0034

[ 4835.425249@1] resume axp20-regulator.22+ @ 6204, parent: 2-0034

[ 4835.425328@1] resume axp20-regulator.23+ @ 6204, parent: 2-0034

[ 4835.425404@1] resume axp20-regulator.24+ @ 6204, parent: 2-0034

[ 4835.425480@1] resume axp20-regulator.25+ @ 6204, parent: 2-0034

[ 4835.425554@1] resume axp20-regulator.26+ @ 6204, parent: 2-0034

[ 4835.425628@1] resume axp20-regulator.27+ @ 6204, parent: 2-0034

[ 4835.425705@1] resume axp20-supplyer.28+ @ 6204, parent: 2-0034

[ 4835.427138@1] resume axp20-gpio.29+ @ 6204, parent: 2-0034

[ 4835.427256@1] resume amcanvas+ @ 6204, parent: platform

[ 4835.427355@1] resume regulatory.0+ @ 6204, parent: platform

[ 4835.433758@1] m3 nand resume entered

[ 4835.434208@1] resume input0+ @ 6204, parent: m1-adckp.0

[ 4835.434522@1] wakeup wake lock: event0-182

[ 4835.434985@1] resume input1+ @ 6204, parent: meson-keyinput.0

[ 4835.435397@1] resume input2+ @ 6204, parent: axp20-supplyer.28

[ 4835.435728@1] resume reg-20-cs-ldo2+ @ 6204, parent: platform

[ 4835.435819@1] resume reg-20-cs-ldo3+ @ 6204, parent: platform

[ 4835.435898@1] resume reg-20-cs-ldo4+ @ 6204, parent: platform

[ 4835.435975@1] resume reg-20-cs-buck2+ @ 6204, parent: platform

[ 4835.436051@1] resume reg-20-cs-buck3+ @ 6204, parent: platform

[ 4835.436128@1] resume reg-20-cs-ldoio0+ @ 6204, parent: platform

[ 4835.436195@1] audiodsp resumed

[ 4835.600870@1] resume alarm+ @ 6204, parent: platform

[ 4835.606997@1] resume boot_monitor+ @ 6204, parent: platform

[ 4835.607273@0] reset gpo !

[ 4835.720624@1] resume 2-1+ @ 6188, parent: usb2

[ 4835.720804@0] resume snd-soc-dummy+ @ 6204, parent: platform

[ 4835.720902@0] resume soc-audio+ @ 6204, parent: platform

[ 4835.721065@0] enter rt5631_resume_pre

[ 4835.721525@0] resume input3+ @ 6204, parent: card0

[ 4835.721643@0] resume input4+ @ 6204, parent: none

[ 4835.722163@0] resume mali_dev.0+ @ 6204, parent: platform

[ 4835.722275@0] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_resume

[ 4835.722659@0] resume memorycard0:sdio:1+ @ 6204, parent: memorycard0:sdio

[ 4835.722730@0] bcmsdh_sdmmc_resume

[ 4835.722816@0] resume memorycard0:sdio:2+ @ 6204, parent: memorycard0:sdio

[ 4835.722870@0] bcmsdh_sdmmc_resume

[ 4835.722913@0] dhd resume, late probe bcmsdh

[ 4835.722982@0] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_resume

[ 4835.780940@0] PM: resume of devices complete after 1259.068 msecs

[ 4835.789726@0] Restarting tasks ...

[ 4835.792520@0] usb 2-1: USB disconnect, device number 7

[ 4835.865444@1] done.

[ 4835.866816@0] enter rt5631_set_bias_level level: 2

[ 4835.867446@0] enter rt5631_set_bias_level level: 2

[ 4835.868812@0] enter rt5631_set_bias_level level: 3

[ 4835.872520@0] enter rt5631_set_bias_level level: 3

[ 4835.877769@0] ***Entered sound/soc/aml/aml_dai.c:aml_dai_i2s_resume

[ 4835.878590@0] enter rt5631_resume_post

[ 4835.882554@0] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0

[ 4835.903249@1] mali_meson_poweron: Interrupt received.

[ 4835.922773@0] option 2-1:1.0: device disconnected

[ 4835.946849@0] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1

[ 4835.952046@0] option 2-1:1.1: device disconnected

[ 4835.960393@0] rt5631 hp unpluged

[ 4836.079079@0] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2

[ 4836.128890@0] option 2-1:1.2: device disconnected

[ 4836.161647@1] sd_mmc_info->card_type=0

[ 4836.161847@1] begin SDIO check ......

[ 4836.186558@1] sdio_timeout_int_times = 0; timeout = 498

[ 4836.189787@1] ** disable watchdog

[ 4836.190365@1] suspend: exit suspend, ret = 0 (2013-01-31 12:20:06.415287001 UTC)

[ 4836.192411@0] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3

[ 4836.196186@0] option 2-1:1.3: device disconnected

[ 4836.210842@1] sdio_timeout_int_times = 0; timeout = 497

[ 4836.215072@1] SEND OP timeout @1

[ 4836.228134@1] begin SD&SDHC check ......

[ 4836.241849@0] set type to SDHC

[ 4836.242553@0] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4

[ 4836.272206@1] active wake lock PowerManagerService

[ 4836.272411@1] active wake lock radio-interface

[ 4836.275118@0] option 2-1:1.4: device disconnected

[ 4836.280069@1] active wake lock unknown_wakeups, time left 499

[ 4836.711377@0] S18A : 0

[ 4836.733948@0] SurfaceFlinger: page allocation failure: order:6, mode:0xd1

[ 4836.735315@0] [<c0015aa0>] (unwind_backtrace+0x0/0xf0) from [<c008642c>] (warn_alloc_failed+0xc4/0x114)

[ 4836.748193@0] [<c008642c>] (warn_alloc_failed+0xc4/0x114) from [<c0089d7c>] (__alloc_pages_nodemask+0x3d0/0x610)

[ 4836.755096@0] [<c0089d7c>] (__alloc_pages_nodemask+0x3d0/0x610) from [<c0016ee4>] (__dma_alloc+0x9c/0x3ec)

[ 4836.764674@0] [<c0016ee4>] (__dma_alloc+0x9c/0x3ec) from [<c00172b8>] (dma_alloc_coherent+0x58/0x60)

[ 4836.774205@0] [<c00172b8>] (dma_alloc_coherent+0x58/0x60) from [<bf01cd88>] (_mali_osk_mem_allocioregion+0x14/0x18 [mali])

[ 4836.784757@0] Got RCA = 4660

[ 4836.787750@0] [<bf01cd88>] (_mali_osk_mem_allocioregion+0x14/0x18 [mali]) from [<bf015f08>] (os_allocator_allocate_page_table_block+0x148/0x250 [mali])

[ 4836.803672@0]

[ 4836.803695@0] ***********CID*************

[ 4836.806576@0] 02:54:4d:53:41:30:38:47:[<bf015f08>] (os_allocator_allocate_page_table_block+0x148/0x250 [mali]) from [<bf0157a8>] (mali_allocation_engine_allocate_page_tables+0x20/0x60 [mali])

[ 4836.823735@0] 04:9c:00:00:58:00:a2:00:

[ 4836.827134@0] MID[8]=2

[ 4836.829650@0] OID[16]=TM

[ 4836.832736@0] [<bf0157a8>] (mali_allocation_engine_allocate_page_tables+0x20/0x60 [mali]) from [<bf01500c>] (mali_mmu_get_table_page+0x1bc/0x2d8 [mali])

[ 4836.846429@0] [<bf01500c>] (mali_mmu_get_table_page+0x1bc/0x2d8 [mali]) from [<bf013688>] (mali_mmu_pagedir_map+0x1d8/0x28c [mali])

[ 4836.856943@1] PNM[40]=SA08G

[ 4836.856975@1] PRV[8]=4

[ 4836.856988@1] PSN[32]=0x5800009c

[ 4836.857001@1] Reserved[4]=0

[ 4836.857013@1] year[8].month[4]=2010.2

[ 4836.857025@1] NotUsed[1]=0

[ 4836.857036@1] CRC[7]=0

[ 4836.857043@1]

[ 4836.879180@1]

[ 4836.879196@1] ********** CSD v2 **************

[ 4836.879594@0] [<bf013688>] (mali_mmu_pagedir_map+0x1d8/0x28c [mali]) from [<bf0153ac>] (mali_allocation_engine_allocate_memory+0x28/0x1c4 [mali])

[ 4836.879743@0] [<bf0153ac>] (mali_allocation_engine_allocate_memory+0x28/0x1c4 [mali]) from [<bf014994>] (_mali_ukk_attach_ump_mem+0x110/0x18c [mali])

[ 4836.879913@0] [<bf014994>] (_mali_ukk_attach_ump_mem+0x110/0x18c [mali]) from [<bf01d95c>] (mem_attach_ump_wrapper+0x64/0xc4 [mali])

[ 4836.880056@0] [<bf01d95c>] (mem_attach_ump_wrapper+0x64/0xc4 [mali]) from [<c00c0054>] (do_vfs_ioctl+0x80/0x568)

[ 4836.880191@0] [<c00c0054>] (do_vfs_ioctl+0x80/0x568) from [<c00c0574>] (sys_ioctl+0x38/0x60)

[ 4836.880250@0] [<c00c0574>] (sys_ioctl+0x38/0x60) from [<c000e980>] (ret_fast_syscall+0x0/0x30)

[ 4836.880273@0] Mem-info:

[ 4836.880288@0] Normal per-cpu:

[ 4836.880306@0] CPU    0: hi:   90, btch:  15 usd:  75

[ 4836.880324@0] CPU    1: hi:   90, btch:  15 usd:  60

[ 4836.880339@0] HighMem per-cpu:

[ 4836.880355@0] CPU    0: hi:  186, btch:  31 usd:   0

[ 4836.880372@0] CPU    1: hi:  186, btch:  31 usd:  79

[ 4836.880411@0] active_anon:40169 inactive_anon:118 isolated_anon:0

[ 4836.880423@0]  active_file:21185 inactive_file:47181 isolated_file:0

[ 4836.880434@0]  unevictable:55 dirty:0 writeback:0 unstable:0

[ 4836.880444@0]  free:54642 slab_reclaimable:3794 slab_unreclaimable:2357

[ 4836.880456@0]  mapped:10245 shmem:141 pagetables:1563 bounce:0

[ 4836.880511@0] Normal free:132180kB min:32768kB low:40960kB high:49152kB active_anon:5272kB inactive_anon:0kB active_file:25268kB inactive_file:109908kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:345096kB mlocked:0kB dirty:0kB writeback:0kB mapped:2068kB shmem:0kB slab_reclaimable:15176kB slab_unreclaimable:9428kB kernel_stack:5000kB pagetables:236kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no

[ 4836.880560@0] lowmem_reserve[]: 0 4063 4063

[ 4836.880615@0] HighMem free:86388kB min:504kB low:12852kB high:25200kB active_anon:155404kB inactive_anon:472kB active_file:59472kB inactive_file:78816kB unevictable:220kB isolated(anon):0kB isolated(file):0kB present:520184kB mlocked:0kB dirty:0kB writeback:0kB mapped:38912kB shmem:564kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:6016kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no

[ 4836.880664@0] lowmem_reserve[]: 0 0 0

[ 4836.880684@0] Normal: 9937*4kB 4296*8kB 2621*16kB 462*32kB 9*64kB 2*128kB 2*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB 0*32768kB 0*65536kB 0*131072kB = 132180kB

[ 4836.880767@0] HighMem: 6971*4kB 3819*8kB 481*16kB 195*32kB 19*64kB 2*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 1*4096kB 1*8192kB 0*16384kB 0*32768kB 0*65536kB 0*131072kB = 86388kB

[ 4836.880848@0] 68557 total pagecache pages

[ 4836.933380@0] 218368 pages of RAM

[ 4836.933406@0] 58353 free pages

[ 4836.933421@0] 4970 reserved pages

[ 4836.933434@0] 5137 slab pages

[ 4836.933446@0] 171283 pages shared

[ 4836.933459@0] 0 pages swap cached

[ 4837.152363@1] 40:0e:00:32:5b:59:00:00:3b:67:7f:80:0a:40:00:00:

[ 4837.156192@1] CSD_STRUCTURE[2]=1

[ 4837.159577@1] Reserved1[6]=0

[ 4837.162490@1] TAAC[8]=14

[ 4837.164958@1] NSAC[8]=0

[ 4837.167389@1] TRAN_SPEED[8]=50

[ 4837.170525@1] CCC[8+4]=0x5b5

[ 4837.173291@1] READ_BL_LEN[4]=9

[ 4837.176329@1] READ_BL_PARTIAL[1]=0

[ 4837.179714@1] WRITE_BLK_MISALIGN[1]=0

[ 4837.183388@1] READ_BLK_MISALIGN[1]=0

[ 4837.186918@1] DSR_IMP[1]=0

[ 4837.189608@1] Reserved2[4]=0

[ 4837.192528@1] Reserved3[2]=0

[ 4837.195340@1] C_SIZE[6+8+8]=15207

[ 4837.198637@1] Reserved4[1]=0

[ 4837.201861@1] ERASE_BLK_EN[1]=1

[ 4837.204627@1] SECTOR_SIZE[6+1]=127

[ 4837.208011@1] WP_GRP_SIZE[7]=0

[ 4837.211074@1] WP_GRP_ENABLE[1]=0

[ 4837.215647@1] Reserved5[2]=0

[ 4837.217127@1] R2W_FACTOR[3]=2

[ 4837.220127@1] WRITE_BL_LEN[2+2]=9

[ 4837.223376@1] WRITE_BL_PARTIAL[1]=0

[ 4837.226848@1] Reserved6[5]=0

[ 4837.229712@1] FILE_FORMAT_GRP[1]=0

[ 4837.233167@1] COPY[1]=0

[ 4837.235529@1] PERM_WRITE_PROTECT[1]=0

[ 4837.239186@1] TMP_WRITE_PROTECT[1]=0

[ 4837.242889@1] FILE_FORMAT[2]=0

[ 4837.245978@1] Reserved7[2]=0

[ 4837.249181@1] CRC[7]=0

[ 4837.251361@1] NotUsed[1]=0

[ 4837.251373@1]

[ 4837.255806@1] total block nums : 0xeda000(15572992)

[ 4837.263412@0]

[ 4837.263438@0] ***********SCR*************

[ 4837.265825@0] 02:35:80:00:01:00:00:00:

[ 4837.269383@0] SD_SPEC[4]=2

[ 4837.274202@0] SCR_STRUCTURE[4]=0

[ 4837.275456@0] SD_BUS_WIDTHS[4]=5

[ 4837.278666@0] SD_SECURITY[3]=3

[ 4837.281781@0] DATA_STAT_AFTER_ERASE[1]=0

[ 4837.285611@0] Rsv1[7]=0

[ 4837.288041@0] SD_SPEC3[1]=1

[ 4837.291053@0] CMD_SUPPORT[2]=0

[ 4837.293857@0] Rsv2[6]=0

[ 4837.296288@0] Reserved2[32]=1

[ 4837.296296@0]

[ 4837.302985@0] 00648001 80018001 80018001 80030000

[ 4837.305660@0] 01000000 00000000 00000000 00000000

[ 4837.310436@0] 00000000 00000000 00000000 00000000

[ 4837.315209@0] 00000000 00000000 00000000 00000000

[ 4837.319986@0]

[ 4837.319993@0] ****************switch status****************

[ 4837.327379@0] Data_Struction_Verion : 0

[ 4837.331043@0] Max_Current_Consumption : 100

[ 4837.335176@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 4837.339689@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 4837.344202@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 4837.348716@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 4837.353230@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 4837.357743@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 4837.362257@0] Function_Group_Status6 : 0

[ 4837.366162@0] Function_Group_Status5 : 0

[ 4837.370102@0] Function_Group_Status4 : 0

[ 4837.373974@0] Function_Group_Status3 : 0

[ 4837.377880@0] Function_Group_Status2 : 0

[ 4837.381961@0] Function_Group_Status1 : 1

[ 4837.381972@0]

[ 4837.388357@0] 00648001 80018001 80018001 80030000

[ 4837.392114@0] 01000000 00000000 00000000 00000000

[ 4837.396887@0] 00000000 00000000 00000000 00000000

[ 4837.401661@0] 00000000 00000000 00000000 00000000

[ 4837.406436@0]

[ 4837.406444@0] ****************switch status****************

[ 4837.413846@0] Data_Struction_Verion : 0

[ 4837.417461@0] Max_Current_Consumption : 100

[ 4837.421669@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 4837.426142@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 4837.430704@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 4837.435169@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 4837.439683@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 4837.444201@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 4837.460296@0] Function_Group_Status6 : 0

[ 4837.460379@0] Function_Group_Status5 : 0

[ 4837.463853@0] Function_Group_Status4 : 0

[ 4837.473273@0] Function_Group_Status3 : 0

[ 4837.473387@0] Function_Group_Status2 : 0

[ 4837.475575@0] Function_Group_Status1 : 1

[ 4837.475586@0]

[ 4837.482046@1] monitor : resume

[ 4838.160180@1] Indeed it is in host mode hprt0 = 00021501

[ 4838.340122@1] usb 2-1: new high speed USB device number 8 using dwc_otg

[ 4838.341777@0] Indeed it is in host mode hprt0 = 00001101

[ 4838.542845@0] usb 2-1: New USB device found, idVendor=19f5, idProduct=9013

[ 4838.544196@0] usb 2-1: New USB device strings: Mfr=4, Product=3, SerialNumber=0

[ 4838.551688@0] usb 2-1: Product: Qualcomm CDMA Technologies MSM

[ 4838.557297@0] usb 2-1: Manufacturer: Qualcomm, Incorporated

[ 4838.578404@1] option 2-1:1.0: GSM modem (1-port) converter detected

[ 4838.584502@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0

[ 4838.588377@1] option 2-1:1.1: GSM modem (1-port) converter detected

[ 4838.597044@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1

[ 4838.624751@0] option 2-1:1.2: GSM modem (1-port) converter detected

[ 4838.640782@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2

[ 4838.649986@0] option 2-1:1.3: GSM modem (1-port) converter detected

[ 4838.670078@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3

[ 4838.682664@1] option 2-1:1.4: GSM modem (1-port) converter detected

[ 4838.701398@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB4

[ 4841.304742@0] PM: Syncing filesystems ... done.

[ 4841.325115@0] Freezing user space processes ... (elapsed 0.03 seconds) done.

[ 4841.361114@1] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

[ 4841.394596@0] suspend 2-1+ @ 6204, parent: usb2

[ 4841.394943@0] option: option_instat_callback: error -2

[ 4841.398913@0] option: option_instat_callback: error -2

[ 4841.404274@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_suspend

[ 4841.410536@1] suspend memorycard0:sdio:2+ @ 6188, parent: memorycard0:sdio

[ 4841.417246@1] bcmsdh_sdmmc_suspend

[ 4841.420727@1] suspend memorycard0:sdio:1+ @ 6188, parent: memorycard0:sdio

[ 4841.427515@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_suspend

[ 4841.434101@1] suspend mali_dev.0+ @ 6188, parent: platform

[ 4841.439865@1] suspend input4+ @ 6188, parent: none

[ 4841.444366@1] suspend input3+ @ 6188, parent: card0

[ 4841.449179@1] suspend soc-audio+ @ 6188, parent: platform

[ 4841.460393@0] enter rt5631_suspend_pre

[ 4841.460466@0] ***Entered sound/soc/aml/aml_dai.c:aml_dai_i2s_suspend

[ 4841.462860@0] enter rt5631_set_bias_level level: 2

[ 4841.463203@0] enter rt5631_set_bias_level level: 2

[ 4841.464033@0] enter rt5631_set_bias_level level: 1

[ 4841.464151@0] enter rt5631_set_bias_level level: 1

[ 4841.466240@0] enter rt5631_suspend_post

[ 4841.466330@0] suspend snd-soc-dummy+ @ 6188, parent: platform

[ 4841.467483@0] suspend usb2+ @ 6204, parent: lm1

[ 4841.472004@0] suspend boot_monitor+ @ 6188, parent: platform

[ 4841.477256@0] suspend alarm+ @ 6188, parent: platform

[ 4841.482689@1] suspend usb1+ @ 6196, parent: lm0

[ 4841.540140@0] audiodsp suspend

[ 4841.540293@0] suspend reg-20-cs-ldoio0+ @ 6188, parent: platform

[ 4841.543701@0] suspend reg-20-cs-buck3+ @ 6188, parent: platform

[ 4841.549599@0] suspend reg-20-cs-buck2+ @ 6188, parent: platform

[ 4841.555788@0] suspend reg-20-cs-ldo4+ @ 6188, parent: platform

[ 4841.561406@0] suspend reg-20-cs-ldo3+ @ 6188, parent: platform

[ 4841.567134@0] suspend reg-20-cs-ldo2+ @ 6188, parent: platform

[ 4841.573097@0] suspend input2+ @ 6188, parent: axp20-supplyer.28

[ 4841.578988@0] suspend input1+ @ 6188, parent: meson-keyinput.0

[ 4841.584976@0] suspend input0+ @ 6188, parent: m1-adckp.0

[ 4841.590514@0] m3 nand suspend entered

[ 4841.721387@0] suspend regulatory.0+ @ 6188, parent: platform

[ 4841.721887@0] suspend amcanvas+ @ 6188, parent: platform

[ 4841.726971@0] suspend axp20-gpio.29+ @ 6188, parent: 2-0034

[ 4841.732919@0] suspend axp20-supplyer.28+ @ 6188, parent: 2-0034

[ 4841.740815@0] suspend axp20-regulator.27+ @ 6188, parent: 2-0034

[ 4841.744363@0] suspend axp20-regulator.26+ @ 6188, parent: 2-0034

[ 4841.750479@0] suspend axp20-regulator.25+ @ 6188, parent: 2-0034

[ 4841.756339@0] suspend axp20-regulator.24+ @ 6188, parent: 2-0034

[ 4841.762711@0] suspend axp20-regulator.23+ @ 6188, parent: 2-0034

[ 4841.768315@0] suspend axp20-regulator.22+ @ 6188, parent: 2-0034

[ 4841.774434@0] suspend axp20-regulator.21+ @ 6188, parent: 2-0034

[ 4841.780444@0] suspend 2-0034+ @ 6188, parent: i2c-2

[ 4841.785167@0] suspend i2c-2+ @ 6188, parent: none

[ 4841.789840@0] suspend 1-001a+ @ 6188, parent: i2c-1

[ 4841.795066@0] suspend 1-0068+ @ 6188, parent: i2c-1

[ 4841.799608@0] suspend i2c-1+ @ 6188, parent: none

[ 4841.804537@0] suspend 0-0038+ @ 6188, parent: i2c-0

[ 4841.809115@0] suspend 0-003c+ @ 6188, parent: i2c-0

[ 4841.814109@0] suspend 0-0021+ @ 6188, parent: i2c-0

[ 4841.818849@0] suspend i2c-0+ @ 6188, parent: none

[ 4841.823944@0] suspend aml-bl+ @ 6188, parent: platform

[ 4841.828642@0] suspend mesonlcd.0+ @ 6188, parent: platform

[ 4841.834241@0] suspend bt-dev+ @ 6188, parent: platform

[ 4841.839230@0] suspend wifi_power+ @ 6188, parent: platform

[ 4841.844808@0] suspend gps_power+ @ 6188, parent: platform

[ 4841.850439@0] suspend aml-modem+ @ 6188, parent: platform

[ 4841.855422@0] do aml_modem_suspend

[ 4841.858892@0] MU509 power_off!

[ 4841.858925@0]  modem_disable for MU509 !

[ 4841.863807@0]

[ 4841.867659@0] suspend simdetect.0+ @ 6188, parent: platform

[ 4841.873473@0] suspend cpufreq-meson+ @ 6188, parent: platform

[ 4841.879077@0] suspend meson-cs-regulator.0+ @ 6188, parent: platform

[ 4841.885776@0] suspend freescale.0+ @ 6188, parent: platform

[ 4841.891089@0] suspend mesonvout2.0+ @ 6188, parent: platform

[ 4841.896603@0] suspend ppmgr.0+ @ 6188, parent: platform

[ 4841.902087@0] suspend aml_rt5631_audio.0+ @ 6188, parent: platform

[ 4841.907977@0] suspend aml-dai.0+ @ 6188, parent: platform

[ 4841.913709@0] suspend aml-audio.0+ @ 6188, parent: platform

[ 4841.918918@0] suspend meson-keyinput.0+ @ 6188, parent: platform

[ 4841.925032@0] suspend m1-adckp.0+ @ 6188, parent: platform

[ 4841.930473@0] suspend saradc.0+ @ 6188, parent: platform

[ 4841.935669@0] suspend aml_rtc+ @ 6188, parent: platform

[ 4841.941265@0] suspend efuse+ @ 6188, parent: platform

[ 4841.945910@0] suspend pm-meson+ @ 6188, parent: platform

[ 4841.951333@0] suspend AMLOGIC_CARD+ @ 6188, parent: platform

[ 4841.956840@0] suspend vm.0+ @ 6188, parent: platform

[ 4841.961899@0] suspend amvdec_656in+ @ 6188, parent: platform

[ 4841.967432@0] suspend vdin+ @ 6188, parent: platform

[ 4841.972730@0] suspend aml_nand.0+ @ 6188, parent: platform

[ 4841.977851@0] suspend mesonstream.0+ @ 6188, parent: platform

[ 4841.983702@0] suspend mesonvout.0+ @ 6188, parent: platform

[ 4841.989149@0] suspend mesonfb-ext.0+ @ 6188, parent: platform

[ 4841.994988@0] suspend mesonfb.0+ @ 6188, parent: platform

[ 4842.001131@0] suspend mesonuart+ @ 6188, parent: platform

[ 4842.005606@0] suspend aml-i2c.2+ @ 6188, parent: platform

[ 4842.011085@0] suspend aml-i2c.1+ @ 6188, parent: platform

[ 4842.016365@0] suspend aml-i2c.0+ @ 6188, parent: platform

[ 4842.021844@0] suspend reg-dummy+ @ 6188, parent: platform

[ 4842.027131@0] suspend power.0+ @ 6188, parent: platform

[ 4842.032621@0] suspend amhdmitx.0+ @ 6188, parent: platform

[ 4842.037998@0] PM: suspend of devices complete after 645.984 msecs

[ 4842.043944@0] enter meson_pm_prepare!

[ 4842.051479@0] PM: late suspend of devices complete after 3.939 msecs

[ 4842.053845@0] Disabling non-boot CPUs ...

[ 4842.059473@1] IRQ61 no longer affine to CPU1

[ 4842.060112@1] Disable timerD

[ 4842.060991@0] CPU1: shutdown

[ 4842.071503@0] Disable timerB

[ 4842.071626@0] Disable timerA

[ 4842.073560@0] MMC_LP_CTRL1 before=0x78000030

[ 4842.077798@0] MMC_LP_CTRL1 after=0x60a80000

[ 4842.080081@0] cpufreq suspend sleep_freq=144Mhz max=1320MHz

[ 4842.080081@0] enter meson_pm_suspend!

[ 4842.080081@0] ** enable watchdog

[ 4842.080081@0] target ddr clock 0x8001082b!

[ 4842.080081@0] analog off

[ 4842.080081@0] SAR_ADC(0xf110868c):0xc3a8500a & ~0x40200000 | 0x10000000 = 0x9388500a

[ 4842.080081@0] LED_PWM_REG0(0xf1108768):0x63100f & ~0x1000 | 0x2000 = 0x63100f

[ 4842.080081@0] clk HHI_AUD_CLK_CNTL(f1104178) off

[ 4842.080081@0] clk HHI_HDMI_CLK_CNTL(f11041cc) off

[ 4842.080081@0] clk HHI_MPEG_CLK_CNTL(f1104174) off

[ 4842.080081@0] clk HHI_VDEC_CLK_CNTL(f11041b4) off

[ 4842.080081@0] sleep ...

[ 4842.080081@0] ** disable watchdog

[ 4842.080081@0] power down cpu --

[ 4842.080081@0] ** enable watchdog

[ 4842.080081@0] ... wake up

[ 4842.080081@0] RTCADD3=0x23600000

[ 4842.080081@0] RTCADD3=0x3600000

[ 4842.080081@0] clk HHI_VDEC_CLK_CNTL(f11041b4) on

[ 4842.080081@0] clk HHI_MPEG_CLK_CNTL(f1104174) on

[ 4842.080081@0] clk HHI_HDMI_CLK_CNTL(f11041cc) on

[ 4842.080081@0] clk HHI_AUD_CLK_CNTL(f1104178) on

[ 4842.080081@0] analog on

[ 4842.080081@0] cpufreq resume sleep_freq=144Mhz

[ 4842.080081@0] MMC_LP_CTRL1 before=0x60a80000

[ 4842.080081@0] MMC_LP_CTRL1 after=0x78000030

[ 4842.080081@0] Resume timerA

[ 4842.080081@0] Resume timerB

[ 4842.080081@0] Enabling non-boot CPUs ...

[ 4842.069219@1] CPU1: Booted secondary processor

[ 4842.069219@1] MESON TIMER-D c09630c0

[ 4842.104427@1] Disable timerD

[ 4842.104427@1] CPU1: Unknown IPI message 0x0

[ 4842.113670@1] Switched to NOHz mode on CPU #1

[ 4842.118858@0] CPU1 is up

[ 4842.124564@0] PM: early resume of devices complete after 3.684 msecs

[ 4842.127421@0] enter meson_pm_finish!

[ 4842.131887@0] resume amhdmitx.0+ @ 6188, parent: platform

[ 4842.135800@0] resume power.0+ @ 6188, parent: platform

[ 4842.141146@0] resume reg-dummy+ @ 6188, parent: platform

[ 4842.146319@0] resume aml-i2c.0+ @ 6188, parent: platform

[ 4842.151957@1] resume aml-i2c.1+ @ 6188, parent: platform

[ 4842.156705@1] resume aml-i2c.2+ @ 6188, parent: platform

[ 4842.162083@1] resume mesonuart+ @ 6188, parent: platform

[ 4842.167295@1] resume mesonfb.0+ @ 6188, parent: platform

[ 4842.172676@1] resume mesonfb-ext.0+ @ 6188, parent: platform

[ 4842.178237@1] resume mesonvout.0+ @ 6188, parent: platform

[ 4842.183856@1] resume mesonstream.0+ @ 6188, parent: platform

[ 4842.189344@1] resume aml_nand.0+ @ 6188, parent: platform

[ 4842.194792@1] resume vdin+ @ 6188, parent: platform

[ 4842.199586@1] resume amvdec_656in+ @ 6188, parent: platform

[ 4842.205195@1] resume vm.0+ @ 6188, parent: platform

[ 4842.209999@1] resume AMLOGIC_CARD+ @ 6188, parent: platform

[ 4842.215686@1] resume pm-meson+ @ 6188, parent: platform

[ 4842.220825@1] resume efuse+ @ 6188, parent: platform

[ 4842.225712@1] resume aml_rtc+ @ 6188, parent: platform

[ 4842.230887@1] resume saradc.0+ @ 6188, parent: platform

[ 4842.236041@1] resume m1-adckp.0+ @ 6188, parent: platform

[ 4842.241556@1] resume meson-keyinput.0+ @ 6188, parent: platform

[ 4842.247316@1] key_input resume by alarm event, reg: 12345678

[ 4842.253036@1] resume aml-audio.0+ @ 6188, parent: platform

[ 4842.258434@1] resume aml-dai.0+ @ 6188, parent: platform

[ 4842.263792@1] resume aml_rt5631_audio.0+ @ 6188, parent: platform

[ 4842.269806@1] resume ppmgr.0+ @ 6188, parent: platform

[ 4842.274978@1] resume mesonvout2.0+ @ 6188, parent: platform

[ 4842.280530@1] resume freescale.0+ @ 6188, parent: platform

[ 4842.285951@1] resume meson-cs-regulator.0+ @ 6188, parent: platform

[ 4842.292251@1] resume cpufreq-meson+ @ 6188, parent: platform

[ 4842.297842@1] resume simdetect.0+ @ 6188, parent: platform

[ 4842.303382@1] resume aml-modem+ @ 6188, parent: platform

[ 4842.308591@1] do aml_modem_resume on ON state

[ 4842.312980@1] MU509 power_on!

[ 4842.313004@1]  modem_enable for MU509 !

[ 4842.367794@1]

[ 4843.072612@1] resume gps_power+ @ 6188, parent: platform

[ 4843.072897@1] resume wifi_power+ @ 6188, parent: platform

[ 4843.078014@1] resume bt-dev+ @ 6188, parent: platform

[ 4843.083144@1] resume mesonlcd.0+ @ 6188, parent: platform

[ 4843.088431@1] resume aml-bl+ @ 6188, parent: platform

[ 4843.093621@1] resume usb1+ @ 6204, parent: lm0

[ 4843.098009@1] resume usb2+ @ 6186, parent: lm1

[ 4843.102505@1] resume i2c-0+ @ 6188, parent: none

[ 4843.106927@1] resume 0-0021+ @ 6188, parent: i2c-0

[ 4843.112372@1] resume 0-003c+ @ 6188, parent: i2c-0

[ 4843.116473@1] resume 0-0038+ @ 6188, parent: i2c-0

[ 4843.121626@1] resume i2c-1+ @ 6188, parent: none

[ 4843.125846@1] resume 1-0068+ @ 6188, parent: i2c-1

[ 4843.130755@1] resume 1-001a+ @ 6188, parent: i2c-1

[ 4843.135392@1] resume i2c-2+ @ 6188, parent: none

[ 4843.139986@1] resume 2-0034+ @ 6188, parent: i2c-2

[ 4843.144864@1] resume axp20-regulator.21+ @ 6188, parent: 2-0034

[ 4843.150750@1] resume axp20-regulator.22+ @ 6188, parent: 2-0034

[ 4843.156566@1] resume axp20-regulator.23+ @ 6188, parent: 2-0034

[ 4843.162547@1] resume axp20-regulator.24+ @ 6188, parent: 2-0034

[ 4843.168371@1] resume axp20-regulator.25+ @ 6188, parent: 2-0034

[ 4843.174349@1] resume axp20-regulator.26+ @ 6188, parent: 2-0034

[ 4843.180248@1] resume axp20-regulator.27+ @ 6188, parent: 2-0034

[ 4843.186077@1] resume axp20-supplyer.28+ @ 6188, parent: 2-0034

[ 4843.193305@1] resume axp20-gpio.29+ @ 6188, parent: 2-0034

[ 4843.197396@1] resume amcanvas+ @ 6188, parent: platform

[ 4843.202690@1] resume regulatory.0+ @ 6188, parent: platform

[ 4843.214350@1] m3 nand resume entered

[ 4843.214932@1] resume input0+ @ 6188, parent: m1-adckp.0

[ 4843.217864@1] wakeup wake lock: event0-182

[ 4843.222136@1] resume input1+ @ 6188, parent: meson-keyinput.0

[ 4843.227884@1] resume input2+ @ 6188, parent: axp20-supplyer.28

[ 4843.233787@0] resume 2-1+ @ 6203, parent: usb2

[ 4843.234276@1] resume reg-20-cs-ldo2+ @ 6188, parent: platform

[ 4843.234368@1] resume reg-20-cs-ldo3+ @ 6188, parent: platform

[ 4843.234449@1] resume reg-20-cs-ldo4+ @ 6188, parent: platform

[ 4843.234528@1] resume reg-20-cs-buck2+ @ 6188, parent: platform

[ 4843.234607@1] resume reg-20-cs-buck3+ @ 6188, parent: platform

[ 4843.234684@1] resume reg-20-cs-ldoio0+ @ 6188, parent: platform

[ 4843.234753@1] audiodsp resumed

[ 4843.275662@1] resume alarm+ @ 6188, parent: platform

[ 4843.283082@1] reset gpo !

[ 4843.283563@1] resume boot_monitor+ @ 6188, parent: platform

[ 4843.288793@1] resume snd-soc-dummy+ @ 6188, parent: platform

[ 4843.294354@1] resume soc-audio+ @ 6188, parent: platform

[ 4843.299615@1] enter rt5631_resume_pre

[ 4843.300215@1] resume input3+ @ 6188, parent: card0

[ 4843.304336@1] resume input4+ @ 6188, parent: none

[ 4843.309410@1] resume mali_dev.0+ @ 6188, parent: platform

[ 4843.314498@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_resume

[ 4843.321132@1] resume memorycard0:sdio:1+ @ 6188, parent: memorycard0:sdio

[ 4843.327547@1] bcmsdh_sdmmc_resume

[ 4843.330974@1] resume memorycard0:sdio:2+ @ 6188, parent: memorycard0:sdio

[ 4843.337605@1] bcmsdh_sdmmc_resume

[ 4843.341138@1] dhd resume, late probe bcmsdh

[ 4843.341232@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_resume

[ 4843.347577@1] PM: resume of devices complete after 1216.853 msecs

[ 4843.358603@1] Restarting tasks ...

[ 4843.359510@0] usb 2-1: USB disconnect, device number 8

[ 4843.417302@0] enter rt5631_set_bias_level level: 2

[ 4843.417746@0] enter rt5631_set_bias_level level: 2

[ 4843.422076@0] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0

[ 4843.444101@1] done.

[ 4843.445972@1] enter rt5631_set_bias_level level: 3

[ 4843.461980@0] option 2-1:1.0: device disconnected

[ 4843.502297@0] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1

[ 4843.486061@1] mali_meson_poweron: Interrupt received.

[ 4843.519920@0] option 2-1:1.1: device disconnected

[ 4843.546382@0] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2

[ 4843.580846@1] enter rt5631_set_bias_level level: 3

[ 4843.589500@0] option 2-1:1.2: device disconnected

[ 4843.603297@1] ***Entered sound/soc/aml/aml_dai.c:aml_dai_i2s_resume

[ 4843.604131@1] enter rt5631_resume_post

[ 4843.604221@1] rt5631 hp unpluged

[ 4843.629609@0] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3

[ 4843.641729@0] option 2-1:1.3: device disconnected

[ 4843.662247@0] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4

[ 4843.672925@0] option 2-1:1.4: device disconnected

[ 4843.717872@1] ** disable watchdog

[ 4843.718103@1] suspend: exit suspend, ret = 0 (2013-01-31 12:25:10.194273000 UTC)

[ 4843.760792@0] sd_mmc_info->card_type=0

[ 4843.761117@0] begin SDIO check ......

[ 4843.785553@0] sdio_timeout_int_times = 0; timeout = 498

[ 4843.808659@0] sdio_timeout_int_times = 0; timeout = 498

[ 4843.808837@0] SEND OP timeout @1

[ 4843.813763@0] begin SD&SDHC check ......

[ 4843.844896@0] set type to SDHC

[ 4844.321318@0] S18A : 0

[ 4844.380593@0] Got RCA = 4660

[ 4844.381460@0]

[ 4844.381481@0] ***********CID*************

[ 4844.383633@0] 02:54:4d:53:41:30:38:47:04:9c:00:00:58:00:a2:00:

[ 4844.389234@0] MID[8]=2

[ 4844.391889@0] OID[16]=TM

[ 4844.394274@0] PNM[40]=SA08G

[ 4844.397049@0] PRV[8]=4

[ 4844.399391@0] PSN[32]=0x5800009c

[ 4844.403044@0] Reserved[4]=0

[ 4844.405383@0] year[8].month[4]=2010.2

[ 4844.409024@0] NotUsed[1]=0

[ 4844.412012@0] CRC[7]=0

[ 4844.412032@0]

[ 4844.416503@0]

[ 4844.416523@0] ********** CSD v2 **************

[ 4844.421864@0] 40:0e:00:32:5b:59:00:00:3b:67:7f:80:0a:40:00:00:

[ 4844.427427@0] CSD_STRUCTURE[2]=1

[ 4844.430874@0] Reserved1[6]=0

[ 4844.433676@0] TAAC[8]=14

[ 4844.436192@0] NSAC[8]=0

[ 4844.438625@0] TRAN_SPEED[8]=50

[ 4844.442233@0] CCC[8+4]=0x5b5

[ 4844.444529@0] READ_BL_LEN[4]=9

[ 4844.447565@0] READ_BL_PARTIAL[1]=0

[ 4844.451040@0] WRITE_BLK_MISALIGN[1]=0

[ 4844.454597@0] READ_BLK_MISALIGN[1]=0

[ 4844.458153@0] DSR_IMP[1]=0

[ 4844.460923@0] Reserved2[4]=0

[ 4844.463709@0] Reserved3[2]=0

[ 4844.466573@0] C_SIZE[6+8+8]=15207

[ 4844.469870@0] Reserved4[1]=0

[ 4844.473022@0] ERASE_BLK_EN[1]=1

[ 4844.475862@0] SECTOR_SIZE[6+1]=127

[ 4844.479245@0] WP_GRP_SIZE[7]=0

[ 4844.482365@0] WP_GRP_ENABLE[1]=0

[ 4844.485495@0] Reserved5[2]=0

[ 4844.488359@0] R2W_FACTOR[3]=2

[ 4844.491371@0] WRITE_BL_LEN[2+2]=9

[ 4844.494609@0] WRITE_BL_PARTIAL[1]=0

[ 4844.498080@0] Reserved6[5]=0

[ 4844.501240@0] FILE_FORMAT_GRP[1]=0

[ 4844.504333@0] COPY[1]=0

[ 4844.506762@0] PERM_WRITE_PROTECT[1]=0

[ 4844.510501@0] TMP_WRITE_PROTECT[1]=0

[ 4844.513966@0] FILE_FORMAT[2]=0

[ 4844.517003@0] Reserved7[2]=0

[ 4844.519870@0] CRC[7]=0

[ 4844.522373@0] NotUsed[1]=0

[ 4844.522394@0]

[ 4844.527030@0] total block nums : 0xeda000(15572992)

[ 4844.532957@0]

[ 4844.532978@0] ***********SCR*************

[ 4844.537056@0] 02:35:80:00:01:00:00:00:

[ 4844.540615@0] SD_SPEC[4]=2

[ 4844.543477@0] SCR_STRUCTURE[4]=0

[ 4844.546688@0] SD_BUS_WIDTHS[4]=5

[ 4844.549900@0] SD_SECURITY[3]=3

[ 4844.553012@0] DATA_STAT_AFTER_ERASE[1]=0

[ 4844.556845@0] Rsv1[7]=0

[ 4844.559275@0] SD_SPEC3[1]=1

[ 4844.562302@0] CMD_SUPPORT[2]=0

[ 4844.565092@0] Rsv2[6]=0

[ 4844.567523@0] Reserved2[32]=1

[ 4844.567540@0]

[ 4844.574253@0] 00648001 80018001 80018001 80030000

[ 4844.576894@0] 01000000 00000000 00000000 00000000

[ 4844.581668@0] 00000000 00000000 00000000 00000000

[ 4844.586441@0] 00000000 00000000 00000000 00000000

[ 4844.591221@0]

[ 4844.591238@0] ****************switch status****************

[ 4844.598422@0] Data_Struction_Verion : 0

[ 4844.602576@0] Max_Current_Consumption : 100

[ 4844.606413@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 4844.611012@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 4844.615439@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 4844.619951@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 4844.624468@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 4844.628979@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 4844.633491@0] Function_Group_Status6 : 0

[ 4844.637396@0] Function_Group_Status5 : 0

[ 4844.641360@0] Function_Group_Status4 : 0

[ 4844.645213@0] Function_Group_Status3 : 0

[ 4844.649113@0] Function_Group_Status2 : 0

[ 4844.653299@0] Function_Group_Status1 : 1

[ 4844.653320@0]

[ 4844.659632@0] 00648001 80018001 80018001 80030000

[ 4844.663348@0] 01000000 00000000 00000000 00000000

[ 4844.668121@0] 00000000 00000000 00000000 00000000

[ 4844.672895@0] 00000000 00000000 00000000 00000000

[ 4844.677671@0]

[ 4844.677686@0] ****************switch status****************

[ 4844.685129@0] Data_Struction_Verion : 0

[ 4844.688696@0] Max_Current_Consumption : 100

[ 4844.692933@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 4844.697378@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 4844.701892@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 4844.706406@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 4844.711234@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 4844.715431@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 4844.719943@0] Function_Group_Status6 : 0

[ 4844.723933@0] Function_Group_Status5 : 0

[ 4844.727754@0] Function_Group_Status4 : 0

[ 4844.731727@0] Function_Group_Status3 : 0

[ 4844.735567@0] Function_Group_Status2 : 0

[ 4844.739472@0] Function_Group_Status1 : 1

[ 4844.739491@0]

[ 4844.745325@0] monitor : resume

[ 4845.910548@0] Indeed it is in host mode hprt0 = 00021501

[ 4846.090780@0] usb 2-1: new high speed USB device number 9 using dwc_otg

[ 4846.092870@0] Indeed it is in host mode hprt0 = 00001101

[ 4846.294332@0] usb 2-1: New USB device found, idVendor=19f5, idProduct=9013

[ 4846.295921@0] usb 2-1: New USB device strings: Mfr=4, Product=3, SerialNumber=0

[ 4846.303553@0] usb 2-1: Product: Qualcomm CDMA Technologies MSM

[ 4846.308870@0] usb 2-1: Manufacturer: Qualcomm, Incorporated

[ 4846.363501@1] option 2-1:1.0: GSM modem (1-port) converter detected

[ 4846.381294@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0

[ 4846.390523@1] option 2-1:1.1: GSM modem (1-port) converter detected

[ 4846.410803@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1

[ 4846.442597@0] option 2-1:1.2: GSM modem (1-port) converter detected

[ 4846.457686@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2

[ 4846.468000@0] option 2-1:1.3: GSM modem (1-port) converter detected

[ 4846.488677@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3

[ 4846.502670@0] option 2-1:1.4: GSM modem (1-port) converter detected

[ 4846.522652@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB4

[ 4848.768936@0] PM: Syncing filesystems ... done.

[ 4848.784975@0] Freezing user space processes ... (elapsed 0.03 seconds) done.

[ 4848.821695@1] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

[ 4848.856893@1] suspend 2-1+ @ 6188, parent: usb2

[ 4848.857335@1] option: option_instat_callback: error -2

[ 4848.861494@1] option: option_instat_callback: error -2

[ 4848.866573@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_suspend

[ 4848.872928@1] suspend memorycard0:sdio:2+ @ 5812, parent: memorycard0:sdio

[ 4848.879581@1] bcmsdh_sdmmc_suspend

[ 4848.883108@1] suspend memorycard0:sdio:1+ @ 5812, parent: memorycard0:sdio

[ 4848.889857@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_suspend

[ 4848.896482@1] suspend mali_dev.0+ @ 5812, parent: platform

[ 4848.902470@1] suspend input4+ @ 5812, parent: none

[ 4848.906666@1] suspend input3+ @ 5812, parent: card0

[ 4848.911647@1] suspend soc-audio+ @ 5812, parent: platform

[ 4848.916869@1] enter rt5631_suspend_pre

[ 4848.916953@1] ***Entered sound/soc/aml/aml_dai.c:aml_dai_i2s_suspend

[ 4848.925598@1] enter rt5631_set_bias_level level: 2

[ 4848.926086@1] enter rt5631_set_bias_level level: 2

[ 4848.927066@1] enter rt5631_set_bias_level level: 1

[ 4848.927243@1] enter rt5631_set_bias_level level: 1

[ 4848.930185@1] enter rt5631_suspend_post

[ 4848.930320@1] suspend snd-soc-dummy+ @ 5812, parent: platform

[ 4848.931258@1] suspend usb2+ @ 6188, parent: lm1

[ 4848.935544@1] suspend boot_monitor+ @ 5812, parent: platform

[ 4848.941189@0] suspend usb1+ @ 6193, parent: lm0

[ 4848.941273@1] suspend alarm+ @ 5812, parent: platform

[ 4849.000217@1] audiodsp suspend

[ 4849.000461@1] suspend reg-20-cs-ldoio0+ @ 5812, parent: platform

[ 4849.003822@1] suspend reg-20-cs-buck3+ @ 5812, parent: platform

[ 4849.009721@1] suspend reg-20-cs-buck2+ @ 5812, parent: platform

[ 4849.015734@1] suspend reg-20-cs-ldo4+ @ 5812, parent: platform

[ 4849.021533@1] suspend reg-20-cs-ldo3+ @ 5812, parent: platform

[ 4849.027252@1] suspend reg-20-cs-ldo2+ @ 5812, parent: platform

[ 4849.033238@1] suspend input2+ @ 5812, parent: axp20-supplyer.28

[ 4849.039175@1] suspend input1+ @ 5812, parent: meson-keyinput.0

[ 4849.044962@1] suspend input0+ @ 5812, parent: m1-adckp.0

[ 4849.050853@1] m3 nand suspend entered

[ 4849.181142@1] suspend regulatory.0+ @ 5812, parent: platform

[ 4849.181484@1] suspend amcanvas+ @ 5812, parent: platform

[ 4849.186720@1] suspend axp20-gpio.29+ @ 5812, parent: 2-0034

[ 4849.198001@0] suspend axp20-supplyer.28+ @ 5812, parent: 2-0034

[ 4849.204159@0] suspend axp20-regulator.27+ @ 5812, parent: 2-0034

[ 4849.204739@0] suspend axp20-regulator.26+ @ 5812, parent: 2-0034

[ 4849.211135@0] suspend axp20-regulator.25+ @ 5812, parent: 2-0034

[ 4849.216719@0] suspend axp20-regulator.24+ @ 5812, parent: 2-0034

[ 4849.222835@0] suspend axp20-regulator.23+ @ 5812, parent: 2-0034

[ 4849.228692@0] suspend axp20-regulator.22+ @ 5812, parent: 2-0034

[ 4849.234792@0] suspend axp20-regulator.21+ @ 5812, parent: 2-0034

[ 4849.241043@0] suspend 2-0034+ @ 5812, parent: i2c-2

[ 4849.245542@0] suspend i2c-2+ @ 5812, parent: none

[ 4849.250336@0] suspend 1-001a+ @ 5812, parent: i2c-1

[ 4849.255073@0] suspend 1-0068+ @ 5812, parent: i2c-1

[ 4849.259977@0] suspend i2c-1+ @ 5812, parent: none

[ 4849.264742@0] suspend 0-0038+ @ 5812, parent: i2c-0

[ 4849.269482@0] suspend 0-003c+ @ 5812, parent: i2c-0

[ 4849.274708@0] suspend 0-0021+ @ 5812, parent: i2c-0

[ 4849.279226@0] suspend i2c-0+ @ 5812, parent: none

[ 4849.284089@0] suspend aml-bl+ @ 5812, parent: platform

[ 4849.289013@0] suspend mesonlcd.0+ @ 5812, parent: platform

[ 4849.294604@0] suspend bt-dev+ @ 5812, parent: platform

[ 4849.299602@0] suspend wifi_power+ @ 5812, parent: platform

[ 4849.305556@0] suspend gps_power+ @ 5812, parent: platform

[ 4849.310584@0] suspend aml-modem+ @ 5812, parent: platform

[ 4849.315796@0] do aml_modem_suspend

[ 4849.319264@0] MU509 power_off!

[ 4849.319296@0]  modem_disable for MU509 !

[ 4849.324285@0]

[ 4849.328034@0] suspend simdetect.0+ @ 5812, parent: platform

[ 4849.334105@0] suspend cpufreq-meson+ @ 5812, parent: platform

[ 4849.339458@0] suspend meson-cs-regulator.0+ @ 5812, parent: platform

[ 4849.345904@0] suspend freescale.0+ @ 5812, parent: platform

[ 4849.351433@0] suspend mesonvout2.0+ @ 5812, parent: platform

[ 4849.356974@0] suspend ppmgr.0+ @ 5812, parent: platform

[ 4849.362550@0] suspend aml_rt5631_audio.0+ @ 5812, parent: platform

[ 4849.368349@0] suspend aml-dai.0+ @ 5812, parent: platform

[ 4849.373853@0] suspend aml-audio.0+ @ 5812, parent: platform

[ 4849.379289@0] suspend meson-keyinput.0+ @ 5812, parent: platform

[ 4849.385382@0] suspend m1-adckp.0+ @ 5812, parent: platform

[ 4849.391095@0] suspend saradc.0+ @ 5812, parent: platform

[ 4849.396044@0] suspend aml_rtc+ @ 5812, parent: platform

[ 4849.401959@0] suspend efuse+ @ 5812, parent: platform

[ 4849.406261@0] suspend pm-meson+ @ 5812, parent: platform

[ 4849.411728@0] suspend AMLOGIC_CARD+ @ 5812, parent: platform

[ 4849.417196@0] suspend vm.0+ @ 5812, parent: platform

[ 4849.422441@0] suspend amvdec_656in+ @ 5812, parent: platform

[ 4849.427788@0] suspend vdin+ @ 5812, parent: platform

[ 4849.432816@0] suspend aml_nand.0+ @ 5812, parent: platform

[ 4849.438204@0] suspend mesonstream.0+ @ 5812, parent: platform

[ 4849.444007@0] suspend mesonvout.0+ @ 5812, parent: platform

[ 4849.449497@0] suspend mesonfb-ext.0+ @ 5812, parent: platform

[ 4849.455501@0] suspend mesonfb.0+ @ 5812, parent: platform

[ 4849.460694@0] suspend mesonuart+ @ 5812, parent: platform

[ 4849.465978@0] suspend aml-i2c.2+ @ 5812, parent: platform

[ 4849.471435@0] suspend aml-i2c.1+ @ 5812, parent: platform

[ 4849.476739@0] suspend aml-i2c.0+ @ 5812, parent: platform

[ 4849.482426@0] suspend reg-dummy+ @ 5812, parent: platform

[ 4849.487507@0] suspend power.0+ @ 5812, parent: platform

[ 4849.492796@0] suspend amhdmitx.0+ @ 5812, parent: platform

[ 4849.498364@0] PM: suspend of devices complete after 644.304 msecs

[ 4849.504424@0] enter meson_pm_prepare!

[ 4849.512061@0] PM: late suspend of devices complete after 4.142 msecs

[ 4849.514219@0] Disabling non-boot CPUs ...

[ 4849.519864@1] IRQ61 no longer affine to CPU1

[ 4849.520488@1] Disable timerD

[ 4849.521215@0] CPU1: shutdown

[ 4849.531639@0] Disable timerB

[ 4849.531764@0] Disable timerA

[ 4849.533934@0] MMC_LP_CTRL1 before=0x78000030

[ 4849.538171@0] MMC_LP_CTRL1 after=0x60a80000

[ 4849.540062@0] cpufreq suspend sleep_freq=144Mhz max=1320MHz

[ 4849.540062@0] enter meson_pm_suspend!

[ 4849.540062@0] ** enable watchdog

[ 4849.540062@0] target ddr clock 0x8001082b!

[ 4849.540062@0] analog off

[ 4849.540062@0] SAR_ADC(0xf110868c):0xc3a8500a & ~0x40200000 | 0x10000000 = 0x9388500a

[ 4849.540062@0] LED_PWM_REG0(0xf1108768):0x63100f & ~0x1000 | 0x2000 = 0x63100f

[ 4849.540062@0] clk HHI_AUD_CLK_CNTL(f1104178) off

[ 4849.540062@0] clk HHI_HDMI_CLK_CNTL(f11041cc) off

[ 4849.540062@0] clk HHI_MPEG_CLK_CNTL(f1104174) off

[ 4849.540062@0] clk HHI_VDEC_CLK_CNTL(f11041b4) off

[ 4849.540062@0] sleep ...

[ 4849.540062@0] ** disable watchdog

[ 4849.540062@0] power down cpu --

[ 4849.540062@0] ** enable watchdog

[ 4849.540062@0] ... wake up

[ 4849.540062@0] RTCADD3=0x23600000

[ 4849.540062@0] RTCADD3=0x3600000

[ 4849.540062@0] clk HHI_VDEC_CLK_CNTL(f11041b4) on

[ 4849.540062@0] clk HHI_MPEG_CLK_CNTL(f1104174) on

[ 4849.540062@0] clk HHI_HDMI_CLK_CNTL(f11041cc) on

[ 4849.540062@0] clk HHI_AUD_CLK_CNTL(f1104178) on

[ 4849.540062@0] analog on

[ 4849.540062@0] cpufreq resume sleep_freq=144Mhz

[ 4849.540062@0] MMC_LP_CTRL1 before=0x60a80000

[ 4849.540062@0] MMC_LP_CTRL1 after=0x78000030

[ 4849.540062@0] Resume timerA

[ 4849.540062@0] Resume timerB

[ 4849.540062@0] Enabling non-boot CPUs ...

[ 4849.529608@1] CPU1: Booted secondary processor

[ 4849.529608@1] MESON TIMER-D c09630c0

[ 4849.564829@1] Disable timerD

[ 4849.564829@1] CPU1: Unknown IPI message 0x0

[ 4849.574058@1] Switched to NOHz mode on CPU #1

[ 4849.579259@0] CPU1 is up

[ 4849.584758@0] PM: early resume of devices complete after 3.689 msecs

[ 4849.587802@0] enter meson_pm_finish!

[ 4849.592738@0] resume amhdmitx.0+ @ 5812, parent: platform

[ 4849.596296@0] resume power.0+ @ 5812, parent: platform

[ 4849.602212@0] resume reg-dummy+ @ 5812, parent: platform

[ 4849.606495@0] resume aml-i2c.0+ @ 5812, parent: platform

[ 4849.611988@0] resume aml-i2c.1+ @ 5812, parent: platform

[ 4849.617078@0] resume aml-i2c.2+ @ 5812, parent: platform

[ 4849.622462@0] resume mesonuart+ @ 5812, parent: platform

[ 4849.627667@0] resume mesonfb.0+ @ 5812, parent: platform

[ 4849.633205@0] resume mesonfb-ext.0+ @ 5812, parent: platform

[ 4849.638606@0] resume mesonvout.0+ @ 5812, parent: platform

[ 4849.644117@0] resume mesonstream.0+ @ 5812, parent: platform

[ 4849.649715@0] resume aml_nand.0+ @ 5812, parent: platform

[ 4849.655167@0] resume vdin+ @ 5812, parent: platform

[ 4849.659956@0] resume amvdec_656in+ @ 5812, parent: platform

[ 4849.665717@0] resume vm.0+ @ 5812, parent: platform

[ 4849.670410@0] resume AMLOGIC_CARD+ @ 5812, parent: platform

[ 4849.675928@0] resume pm-meson+ @ 5812, parent: platform

[ 4849.681167@0] resume efuse+ @ 5812, parent: platform

[ 4849.686082@0] resume aml_rtc+ @ 5812, parent: platform

[ 4849.691379@0] resume saradc.0+ @ 5812, parent: platform

[ 4849.696413@0] resume m1-adckp.0+ @ 5812, parent: platform

[ 4849.702278@0] resume meson-keyinput.0+ @ 5812, parent: platform

[ 4849.707687@0] key_input resume by alarm event, reg: 12345678

[ 4849.713342@0] resume aml-audio.0+ @ 5812, parent: platform

[ 4849.718798@0] resume aml-dai.0+ @ 5812, parent: platform

[ 4849.724227@0] resume aml_rt5631_audio.0+ @ 5812, parent: platform

[ 4849.730178@0] resume ppmgr.0+ @ 5812, parent: platform

[ 4849.735290@0] resume mesonvout2.0+ @ 5812, parent: platform

[ 4849.740873@0] resume freescale.0+ @ 5812, parent: platform

[ 4849.746314@0] resume meson-cs-regulator.0+ @ 5812, parent: platform

[ 4849.752694@0] resume cpufreq-meson+ @ 5812, parent: platform

[ 4849.758205@0] resume simdetect.0+ @ 5812, parent: platform

[ 4849.763687@0] resume aml-modem+ @ 5812, parent: platform

[ 4849.768967@0] do aml_modem_resume on ON state

[ 4849.773315@0] MU509 power_on!

[ 4849.773318@0]  modem_enable for MU509 !

[ 4849.828056@0]

[ 4850.529097@0] resume gps_power+ @ 5812, parent: platform

[ 4850.529124@0] resume wifi_power+ @ 5812, parent: platform

[ 4850.534538@0] resume bt-dev+ @ 5812, parent: platform

[ 4850.539440@0] resume mesonlcd.0+ @ 5812, parent: platform

[ 4850.544831@0] resume aml-bl+ @ 5812, parent: platform

[ 4850.549863@0] resume usb1+ @ 6193, parent: lm0

[ 4850.554310@1] resume i2c-0+ @ 5812, parent: none

[ 4850.554318@0] resume usb2+ @ 6178, parent: lm1

[ 4850.563322@1] resume 0-0021+ @ 5812, parent: i2c-0

[ 4850.568086@1] resume 0-003c+ @ 5812, parent: i2c-0

[ 4850.572893@1] resume 0-0038+ @ 5812, parent: i2c-0

[ 4850.577633@1] resume i2c-1+ @ 5812, parent: none

[ 4850.582240@1] resume 1-0068+ @ 5812, parent: i2c-1

[ 4850.587011@1] resume 1-001a+ @ 5812, parent: i2c-1

[ 4850.591787@1] resume i2c-2+ @ 5812, parent: none

[ 4850.596379@1] resume 2-0034+ @ 5812, parent: i2c-2

[ 4850.601160@1] resume axp20-regulator.21+ @ 5812, parent: 2-0034

[ 4850.607056@1] resume axp20-regulator.22+ @ 5812, parent: 2-0034

[ 4850.612966@1] resume axp20-regulator.23+ @ 5812, parent: 2-0034

[ 4850.618862@1] resume axp20-regulator.24+ @ 5812, parent: 2-0034

[ 4850.624773@1] resume axp20-regulator.25+ @ 5812, parent: 2-0034

[ 4850.630673@1] resume axp20-regulator.26+ @ 5812, parent: 2-0034

[ 4850.636569@1] resume axp20-regulator.27+ @ 5812, parent: 2-0034

[ 4850.642478@1] resume axp20-supplyer.28+ @ 5812, parent: 2-0034

[ 4850.649397@1] resume axp20-gpio.29+ @ 5812, parent: 2-0034

[ 4850.653767@1] resume amcanvas+ @ 5812, parent: platform

[ 4850.658966@1] resume regulatory.0+ @ 5812, parent: platform

[ 4850.665783@1] m3 nand resume entered

[ 4850.668118@1] resume input0+ @ 5812, parent: m1-adckp.0

[ 4850.673324@1] wakeup wake lock: event0-182

[ 4850.677409@1] resume input1+ @ 5812, parent: meson-keyinput.0

[ 4850.683115@1] resume 2-1+ @ 6180, parent: usb2

[ 4850.687734@0] resume input2+ @ 5812, parent: axp20-supplyer.28

[ 4850.693388@0] resume reg-20-cs-ldo2+ @ 5812, parent: platform

[ 4850.699065@0] resume reg-20-cs-ldo3+ @ 5812, parent: platform

[ 4850.704825@0] resume reg-20-cs-ldo4+ @ 5812, parent: platform

[ 4850.710654@0] resume reg-20-cs-buck2+ @ 5812, parent: platform

[ 4850.716339@0] resume reg-20-cs-buck3+ @ 5812, parent: platform

[ 4850.722164@0] resume reg-20-cs-ldoio0+ @ 5812, parent: platform

[ 4850.728056@0] audiodsp resumed

[ 4850.731531@0] resume alarm+ @ 5812, parent: platform

[ 4850.736601@0] resume boot_monitor+ @ 5812, parent: platform

[ 4850.736969@1] reset gpo !

[ 4850.744358@0] resume snd-soc-dummy+ @ 5812, parent: platform

[ 4850.749844@0] resume soc-audio+ @ 5812, parent: platform

[ 4850.755163@0] enter rt5631_resume_pre

[ 4850.755334@0] resume input3+ @ 5812, parent: card0

[ 4850.759916@0] resume input4+ @ 5812, parent: none

[ 4850.764657@0] resume mali_dev.0+ @ 5812, parent: platform

[ 4850.769985@0] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_resume

[ 4850.776546@0] resume memorycard0:sdio:1+ @ 5812, parent: memorycard0:sdio

[ 4850.783186@0] bcmsdh_sdmmc_resume

[ 4850.786475@0] resume memorycard0:sdio:2+ @ 5812, parent: memorycard0:sdio

[ 4850.793248@0] bcmsdh_sdmmc_resume

[ 4850.796539@0] dhd resume, late probe bcmsdh

[ 4850.796546@0] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_resume

[ 4850.803142@0] PM: resume of devices complete after 1212.152 msecs

[ 4850.809607@0] Restarting tasks ...

[ 4850.812594@1] usb 2-1: USB disconnect, device number 9

[ 4850.822893@0] done.

[ 4850.827344@1] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0

[ 4850.830402@1] option 2-1:1.0: device disconnected

[ 4850.836605@1] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1

[ 4850.843198@1] option 2-1:1.1: device disconnected

[ 4850.849230@1] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2

[ 4850.856367@1] option 2-1:1.2: device disconnected

[ 4850.863783@1] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3

[ 4850.868847@1] option 2-1:1.3: device disconnected

[ 4850.835028@0] mali_meson_poweron: Interrupt received.

[ 4850.880054@1] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4

[ 4850.887335@1] option 2-1:1.4: device disconnected

[ 4850.927249@1] enter rt5631_set_bias_level level: 2

[ 4850.927430@1] enter rt5631_set_bias_level level: 2

[ 4850.933892@1] ** disable watchdog

[ 4850.933942@1] suspend: exit suspend, ret = 0 (2013-01-31 12:55:12.624351000 UTC)

[ 4850.941878@0] enter rt5631_set_bias_level level: 3

[ 4850.941910@0] enter rt5631_set_bias_level level: 3

[ 4850.942127@0] ***Entered sound/soc/aml/aml_dai.c:aml_dai_i2s_resume

[ 4850.945547@0] enter rt5631_resume_post

[ 4851.040042@0] rt5631 hp unpluged

[ 4851.210309@0] sd_mmc_info->card_type=0

[ 4851.210375@0] begin SDIO check ......

[ 4851.234770@0] sdio_timeout_int_times = 0; timeout = 498

[ 4851.257460@0] sdio_timeout_int_times = 0; timeout = 498

[ 4851.257537@0] SEND OP timeout @1

[ 4851.260627@0] begin SD&SDHC check ......

[ 4851.280534@0] set type to SDHC

[ 4851.740883@0] S18A : 0

[ 4851.800635@0] Got RCA = 4660

[ 4851.801429@0]

[ 4851.801439@0] ***********CID*************

[ 4851.803616@0] 02:54:4d:53:41:30:38:47:04:9c:00:00:58:00:a2:00:

[ 4851.809256@0] MID[8]=2

[ 4851.811827@0] OID[16]=TM

[ 4851.814292@0] PNM[40]=SA08G

[ 4851.817068@0] PRV[8]=4

[ 4851.819412@0] PSN[32]=0x5800009c

[ 4851.822839@0] Reserved[4]=0

[ 4851.825404@0] year[8].month[4]=2010.2

[ 4851.829046@0] NotUsed[1]=0

[ 4851.831790@0] CRC[7]=0

[ 4851.831800@0]

[ 4851.836486@0]

[ 4851.836496@0] ********** CSD v2 **************

[ 4851.841888@0] 40:0e:00:32:5b:59:00:00:3b:67:7f:80:0a:40:00:00:

[ 4851.847449@0] CSD_STRUCTURE[2]=1

[ 4851.851019@0] Reserved1[6]=0

[ 4851.853697@0] TAAC[8]=14

[ 4851.856213@0] NSAC[8]=0

[ 4851.858644@0] TRAN_SPEED[8]=50

[ 4851.861716@0] CCC[8+4]=0x5b5

[ 4851.864549@0] READ_BL_LEN[4]=9

[ 4851.867585@0] READ_BL_PARTIAL[1]=0

[ 4851.871008@0] WRITE_BLK_MISALIGN[1]=0

[ 4851.874616@0] READ_BLK_MISALIGN[1]=0

[ 4851.878175@0] DSR_IMP[1]=0

[ 4851.881066@0] Reserved2[4]=0

[ 4851.883730@0] Reserved3[2]=0

[ 4851.886594@0] C_SIZE[6+8+8]=15207

[ 4851.889892@0] Reserved4[1]=0

[ 4851.892797@0] ERASE_BLK_EN[1]=1

[ 4851.895882@0] SECTOR_SIZE[6+1]=127

[ 4851.899266@0] WP_GRP_SIZE[7]=0

[ 4851.902381@0] WP_GRP_ENABLE[1]=0

[ 4851.905516@0] Reserved5[2]=0

[ 4851.908381@0] R2W_FACTOR[3]=2

[ 4851.911532@0] WRITE_BL_LEN[2+2]=9

[ 4851.914632@0] WRITE_BL_PARTIAL[1]=0

[ 4851.918103@0] Reserved6[5]=0

[ 4851.921016@0] FILE_FORMAT_GRP[1]=0

[ 4851.924353@0] COPY[1]=0

[ 4851.926783@0] PERM_WRITE_PROTECT[1]=0

[ 4851.930470@0] TMP_WRITE_PROTECT[1]=0

[ 4851.933987@0] FILE_FORMAT[2]=0

[ 4851.937025@0] Reserved7[2]=0

[ 4851.939888@0] CRC[7]=0

[ 4851.942428@0] NotUsed[1]=0

[ 4851.942438@0]

[ 4851.947002@0] total block nums : 0xeda000(15572992)

[ 4851.952676@0]

[ 4851.952687@0] ***********SCR*************

[ 4851.957077@0] 02:35:80:00:01:00:00:00:

[ 4851.960636@0] SD_SPEC[4]=2

[ 4851.963500@0] SCR_STRUCTURE[4]=0

[ 4851.966711@0] SD_BUS_WIDTHS[4]=5

[ 4851.969922@0] SD_SECURITY[3]=3

[ 4851.973147@0] DATA_STAT_AFTER_ERASE[1]=0

[ 4851.976867@0] Rsv1[7]=0

[ 4851.979296@0] SD_SPEC3[1]=1

[ 4851.982108@0] CMD_SUPPORT[2]=0

[ 4851.985112@0] Rsv2[6]=0

[ 4851.987542@0] Reserved2[32]=1

[ 4851.987551@0]

[ 4851.994163@0] 00648001 80018001 80018001 80030000

[ 4851.996917@0] 01000000 00000000 00000000 00000000

[ 4852.001697@0] 00000000 00000000 00000000 00000000

[ 4852.006471@0] 00000000 00000000 00000000 00000000

[ 4852.011250@0]

[ 4852.011270@0] ****************switch status****************

[ 4852.018451@0] Data_Struction_Verion : 0

[ 4852.022446@0] Max_Current_Consumption : 100

[ 4852.026441@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 4852.031233@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 4852.035466@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 4852.039980@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 4852.044495@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 4852.049007@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 4852.053520@0] Function_Group_Status6 : 0

[ 4852.057423@0] Function_Group_Status5 : 0

[ 4852.061779@0] Function_Group_Status4 : 0

[ 4852.065238@0] Function_Group_Status3 : 0

[ 4852.069142@0] Function_Group_Status2 : 0

[ 4852.073150@0] Function_Group_Status1 : 1

[ 4852.073174@0]

[ 4852.079669@0] 00648001 80018001 80018001 80030000

[ 4852.083375@0] 01000000 00000000 00000000 00000000

[ 4852.088148@0] 00000000 00000000 00000000 00000000

[ 4852.092923@0] 00000000 00000000 00000000 00000000

[ 4852.097698@0]

[ 4852.097716@0] ****************switch status****************

[ 4852.105083@0] Data_Struction_Verion : 0

[ 4852.108725@0] Max_Current_Consumption : 100

[ 4852.112993@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 4852.117405@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 4852.121922@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 4852.126433@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 4852.131117@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 4852.135460@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 4852.139970@0] Function_Group_Status6 : 0

[ 4852.143968@0] Function_Group_Status5 : 0

[ 4852.147784@0] Function_Group_Status4 : 0

[ 4852.151958@0] Function_Group_Status3 : 0

[ 4852.155596@0] Function_Group_Status2 : 0

[ 4852.159500@0] Function_Group_Status1 : 1

[ 4852.159523@0]

[ 4852.165184@0] monitor : resume

[ 4853.410480@0] Indeed it is in host mode hprt0 = 00021501

[ 4853.590538@0] usb 2-1: new high speed USB device number 10 using dwc_otg

[ 4853.592645@0] Indeed it is in host mode hprt0 = 00001101

[ 4853.806931@0] usb 2-1: New USB device found, idVendor=19f5, idProduct=9013

[ 4853.808475@0] usb 2-1: New USB device strings: Mfr=4, Product=3, SerialNumber=0

[ 4853.816525@0] usb 2-1: Product: Qualcomm CDMA Technologies MSM

[ 4853.821921@0] usb 2-1: Manufacturer: Qualcomm, Incorporated

[ 4853.849588@0] option 2-1:1.0: GSM modem (1-port) converter detected

[ 4853.876910@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0

[ 4853.886629@0] option 2-1:1.1: GSM modem (1-port) converter detected

[ 4853.901830@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1

[ 4853.912284@0] option 2-1:1.2: GSM modem (1-port) converter detected

[ 4853.928254@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2

[ 4853.937647@0] option 2-1:1.3: GSM modem (1-port) converter detected

[ 4853.951583@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3

[ 4853.960928@1] option 2-1:1.4: GSM modem (1-port) converter detected

[ 4853.981148@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB4

[ 4856.003200@1] PM: Syncing filesystems ... done.

[ 4856.023018@1] Freezing user space processes ... (elapsed 0.04 seconds) done.

[ 4856.071388@1] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.

[ 4856.105213@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_suspend

[ 4856.105679@0] suspend 2-1+ @ 6179, parent: usb2

[ 4856.106129@0] option: option_instat_callback: error -2

[ 4856.106377@0] option: option_instat_callback: error -2

[ 4856.121296@1] suspend memorycard0:sdio:2+ @ 5812, parent: memorycard0:sdio

[ 4856.127918@1] bcmsdh_sdmmc_suspend

[ 4856.131447@1] suspend memorycard0:sdio:1+ @ 5812, parent: memorycard0:sdio

[ 4856.138193@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_suspend

[ 4856.144816@1] suspend mali_dev.0+ @ 5812, parent: platform

[ 4856.150915@1] suspend input4+ @ 5812, parent: none

[ 4856.155000@1] suspend input3+ @ 5812, parent: card0

[ 4856.159890@1] suspend soc-audio+ @ 5812, parent: platform

[ 4856.165301@1] enter rt5631_suspend_pre

[ 4856.165392@1] ***Entered sound/soc/aml/aml_dai.c:aml_dai_i2s_suspend

[ 4856.173967@0] enter rt5631_set_bias_level level: 2

[ 4856.174388@0] enter rt5631_set_bias_level level: 2

[ 4856.175408@0] enter rt5631_set_bias_level level: 1

[ 4856.175526@0] enter rt5631_set_bias_level level: 1

[ 4856.178523@1] enter rt5631_suspend_post

[ 4856.178665@1] suspend snd-soc-dummy+ @ 5812, parent: platform

[ 4856.179403@0] suspend usb2+ @ 6194, parent: lm1

[ 4856.179481@1] suspend boot_monitor+ @ 5812, parent: platform

[ 4856.179632@1] suspend alarm+ @ 5812, parent: platform

[ 4856.184418@1] suspend usb1+ @ 6180, parent: lm0

[ 4856.230214@1] audiodsp suspend

[ 4856.230451@1] suspend reg-20-cs-ldoio0+ @ 5812, parent: platform

[ 4856.233821@1] suspend reg-20-cs-buck3+ @ 5812, parent: platform

[ 4856.239718@1] suspend reg-20-cs-buck2+ @ 5812, parent: platform

[ 4856.245727@1] suspend reg-20-cs-ldo4+ @ 5812, parent: platform

[ 4856.251526@1] suspend reg-20-cs-ldo3+ @ 5812, parent: platform

[ 4856.257250@1] suspend reg-20-cs-ldo2+ @ 5812, parent: platform

[ 4856.263232@1] suspend input2+ @ 5812, parent: axp20-supplyer.28

[ 4856.269171@1] suspend input1+ @ 5812, parent: meson-keyinput.0

[ 4856.274920@1] suspend input0+ @ 5812, parent: m1-adckp.0

[ 4856.280847@1] m3 nand suspend entered

[ 4856.411170@1] suspend regulatory.0+ @ 5812, parent: platform

[ 4856.411544@1] suspend amcanvas+ @ 5812, parent: platform

[ 4856.416747@1] suspend axp20-gpio.29+ @ 5812, parent: 2-0034

[ 4856.422501@1] suspend axp20-supplyer.28+ @ 5812, parent: 2-0034

[ 4856.430670@1] suspend axp20-regulator.27+ @ 5812, parent: 2-0034

[ 4856.434140@1] suspend axp20-regulator.26+ @ 5812, parent: 2-0034

[ 4856.440229@1] suspend axp20-regulator.25+ @ 5812, parent: 2-0034

[ 4856.446117@1] suspend axp20-regulator.24+ @ 5812, parent: 2-0034

[ 4856.452202@1] suspend axp20-regulator.23+ @ 5812, parent: 2-0034

[ 4856.458094@1] suspend axp20-regulator.22+ @ 5812, parent: 2-0034

[ 4856.464183@1] suspend axp20-regulator.21+ @ 5812, parent: 2-0034

[ 4856.470184@1] suspend 2-0034+ @ 5812, parent: i2c-2

[ 4856.474945@1] suspend i2c-2+ @ 5812, parent: none

[ 4856.479616@1] suspend 1-001a+ @ 5812, parent: i2c-1

[ 4856.484559@1] suspend 1-0068+ @ 5812, parent: i2c-1

[ 4856.489382@1] suspend i2c-1+ @ 5812, parent: none

[ 4856.494114@1] suspend 0-0038+ @ 5812, parent: i2c-0

[ 4856.498884@1] suspend 0-003c+ @ 5812, parent: i2c-0

[ 4856.503835@1] suspend 0-0021+ @ 5812, parent: i2c-0

[ 4856.508629@1] suspend i2c-0+ @ 5812, parent: none

[ 4856.513439@1] suspend aml-bl+ @ 5812, parent: platform

[ 4856.518414@1] suspend mesonlcd.0+ @ 5812, parent: platform

[ 4856.523972@1] suspend bt-dev+ @ 5812, parent: platform

[ 4856.529008@1] suspend wifi_power+ @ 5812, parent: platform

[ 4856.534671@1] suspend gps_power+ @ 5812, parent: platform

[ 4856.539858@1] suspend aml-modem+ @ 5812, parent: platform

[ 4856.545293@1] do aml_modem_suspend

[ 4856.548670@1] MU509 power_off!

[ 4856.548703@1]  modem_disable for MU509 !

[ 4856.553547@1]

[ 4856.557438@1] suspend simdetect.0+ @ 5812, parent: platform

[ 4856.563212@1] suspend cpufreq-meson+ @ 5812, parent: platform

[ 4856.568855@1] suspend meson-cs-regulator.0+ @ 5812, parent: platform

[ 4856.575268@1] suspend freescale.0+ @ 5812, parent: platform

[ 4856.580822@1] suspend mesonvout2.0+ @ 5812, parent: platform

[ 4856.586381@1] suspend ppmgr.0+ @ 5812, parent: platform

[ 4856.591667@1] suspend aml_rt5631_audio.0+ @ 5812, parent: platform

[ 4856.597753@1] suspend aml-dai.0+ @ 5812, parent: platform

[ 4856.603211@1] suspend aml-audio.0+ @ 5812, parent: platform

[ 4856.608693@1] suspend meson-keyinput.0+ @ 5812, parent: platform

[ 4856.614774@1] suspend m1-adckp.0+ @ 5812, parent: platform

[ 4856.620229@1] suspend saradc.0+ @ 5812, parent: platform

[ 4856.625446@1] suspend aml_rtc+ @ 5812, parent: platform

[ 4856.630762@1] suspend efuse+ @ 5812, parent: platform

[ 4856.635681@1] suspend pm-meson+ @ 5812, parent: platform

[ 4856.641182@1] suspend AMLOGIC_CARD+ @ 5812, parent: platform

[ 4856.646622@1] suspend vm.0+ @ 5812, parent: platform

[ 4856.651666@1] suspend amvdec_656in+ @ 5812, parent: platform

[ 4856.657208@1] suspend vdin+ @ 5812, parent: platform

[ 4856.662244@1] suspend aml_nand.0+ @ 5812, parent: platform

[ 4856.667627@1] suspend mesonstream.0+ @ 5812, parent: platform

[ 4856.673436@1] suspend mesonvout.0+ @ 5812, parent: platform

[ 4856.678923@1] suspend mesonfb-ext.0+ @ 5812, parent: platform

[ 4856.684734@1] suspend mesonfb.0+ @ 5812, parent: platform

[ 4856.690134@1] suspend mesonuart+ @ 5812, parent: platform

[ 4856.695402@1] suspend aml-i2c.2+ @ 5812, parent: platform

[ 4856.700869@1] suspend aml-i2c.1+ @ 5812, parent: platform

[ 4856.706161@1] suspend aml-i2c.0+ @ 5812, parent: platform

[ 4856.711663@1] suspend reg-dummy+ @ 5812, parent: platform

[ 4856.716925@1] suspend power.0+ @ 5812, parent: platform

[ 4856.722216@1] suspend amhdmitx.0+ @ 5812, parent: platform

[ 4856.727875@1] PM: suspend of devices complete after 623.728 msecs

[ 4856.733729@1] enter meson_pm_prepare!

[ 4856.742945@1] PM: late suspend of devices complete after 5.610 msecs

[ 4856.743828@1] Disabling non-boot CPUs ...

[ 4856.760267@1] IRQ61 no longer affine to CPU1

[ 4856.761196@1] Disable timerD

[ 4856.762207@0] CPU1: shutdown

[ 4856.771944@0] Disable timerB

[ 4856.772134@0] Disable timerA

[ 4856.772491@0] MMC_LP_CTRL1 before=0x78000030

[ 4856.776723@0] MMC_LP_CTRL1 after=0x60a80000

[ 4856.780079@0] cpufreq suspend sleep_freq=96Mhz max=1320MHz

[ 4856.780079@0] enter meson_pm_suspend!

[ 4856.780079@0] ** enable watchdog

[ 4856.780079@0] target ddr clock 0x8001082b!

[ 4856.780079@0] analog off

[ 4856.780079@0] SAR_ADC(0xf110868c):0xc3a8500a & ~0x40200000 | 0x10000000 = 0x9388500a

[ 4856.780079@0] LED_PWM_REG0(0xf1108768):0x63100f & ~0x1000 | 0x2000 = 0x63100f

[ 4856.780079@0] clk HHI_AUD_CLK_CNTL(f1104178) off

[ 4856.780079@0] clk HHI_HDMI_CLK_CNTL(f11041cc) off

[ 4856.780079@0] clk HHI_MPEG_CLK_CNTL(f1104174) off

[ 4856.780079@0] clk HHI_VDEC_CLK_CNTL(f11041b4) off

[ 4856.780079@0] sleep ...

[ 4856.780079@0] ** disable watchdog

[ 4856.780079@0] power down cpu --

[ 4856.780079@0] ** enable watchdog

[ 4856.780079@0] ... wake up

[ 4856.780079@0] RTCADD3=0x23600000

[ 4856.780079@0] RTCADD3=0x3600000

[ 4856.780079@0] clk HHI_VDEC_CLK_CNTL(f11041b4) on

[ 4856.780079@0] clk HHI_MPEG_CLK_CNTL(f1104174) on

[ 4856.780079@0] clk HHI_HDMI_CLK_CNTL(f11041cc) on

[ 4856.780079@0] clk HHI_AUD_CLK_CNTL(f1104178) on

[ 4856.780079@0] analog on

[ 4856.780079@0] cpufreq resume sleep_freq=96Mhz

[ 4856.780079@0] MMC_LP_CTRL1 before=0x60a80000

[ 4856.780079@0] MMC_LP_CTRL1 after=0x78000030

[ 4856.780079@0] Resume timerA

[ 4856.780079@0] Resume timerB

[ 4856.780079@0] Enabling non-boot CPUs ...

[ 4856.769108@1] CPU1: Booted secondary processor

[ 4856.769108@1] MESON TIMER-D c09630c0

[ 4856.806532@1] Disable timerD

[ 4856.806532@1] CPU1: Unknown IPI message 0x0

[ 4856.817011@0] CPU1 is up

[ 4856.820181@1] Switched to NOHz mode on CPU #1

[ 4856.823839@0] PM: early resume of devices complete after 5.754 msecs

[ 4856.829682@0] enter meson_pm_finish!

[ 4856.835593@0] resume amhdmitx.0+ @ 5812, parent: platform

[ 4856.837804@0] resume power.0+ @ 5812, parent: platform

[ 4856.843687@0] resume reg-dummy+ @ 5812, parent: platform

[ 4856.848217@0] resume aml-i2c.0+ @ 5812, parent: platform

[ 4856.853672@0] resume aml-i2c.1+ @ 5812, parent: platform

[ 4856.858671@0] resume aml-i2c.2+ @ 5812, parent: platform

[ 4856.864770@1] resume mesonuart+ @ 5812, parent: platform

[ 4856.869263@1] resume mesonfb.0+ @ 5812, parent: platform

[ 4856.874686@1] resume mesonfb-ext.0+ @ 5812, parent: platform

[ 4856.880301@1] resume mesonvout.0+ @ 5812, parent: platform

[ 4856.885671@1] resume mesonstream.0+ @ 5812, parent: platform

[ 4856.891534@1] resume aml_nand.0+ @ 5812, parent: platform

[ 4856.896689@1] resume vdin+ @ 5812, parent: platform

[ 4856.901653@1] resume amvdec_656in+ @ 5812, parent: platform

[ 4856.907100@1] resume vm.0+ @ 5812, parent: platform

[ 4856.912053@1] resume AMLOGIC_CARD+ @ 5812, parent: platform

[ 4856.917519@1] resume pm-meson+ @ 5812, parent: platform

[ 4856.922958@1] resume efuse+ @ 5812, parent: platform

[ 4856.927677@1] resume aml_rtc+ @ 5812, parent: platform

[ 4856.932893@1] resume saradc.0+ @ 5812, parent: platform

[ 4856.938007@1] resume m1-adckp.0+ @ 5812, parent: platform

[ 4856.943469@1] resume meson-keyinput.0+ @ 5812, parent: platform

[ 4856.949278@1] key_input resume by power key pressed, reg: 1234abcd

[ 4856.955703@1] wakeup wake lock: event1-182

[ 4856.960892@1] resume aml-audio.0+ @ 5812, parent: platform

[ 4856.965006@1] resume aml-dai.0+ @ 5812, parent: platform

[ 4856.970517@1] resume aml_rt5631_audio.0+ @ 5812, parent: platform

[ 4856.976375@1] resume ppmgr.0+ @ 5812, parent: platform

[ 4856.981588@1] resume mesonvout2.0+ @ 5812, parent: platform

[ 4856.987048@1] resume freescale.0+ @ 5812, parent: platform

[ 4856.992603@1] resume meson-cs-regulator.0+ @ 5812, parent: platform

[ 4856.998768@1] resume cpufreq-meson+ @ 5812, parent: platform

[ 4857.004491@1] resume simdetect.0+ @ 5812, parent: platform

[ 4857.009874@1] resume aml-modem+ @ 5812, parent: platform

[ 4857.015220@1] do aml_modem_resume on ON state

[ 4857.019486@1] MU509 power_on!

[ 4857.019518@1]  modem_enable for MU509 !

[ 4857.074556@1]

[ 4857.778450@1] resume gps_power+ @ 5812, parent: platform

[ 4857.778727@1] resume wifi_power+ @ 5812, parent: platform

[ 4857.783940@1] resume bt-dev+ @ 5812, parent: platform

[ 4857.788889@1] resume mesonlcd.0+ @ 5812, parent: platform

[ 4857.794359@1] resume aml-bl+ @ 5812, parent: platform

[ 4857.799363@1] resume i2c-0+ @ 5812, parent: none

[ 4857.799444@0] resume usb1+ @ 6194, parent: lm0

[ 4857.799597@0] resume usb2+ @ 6195, parent: lm1

[ 4857.813127@1] resume 0-0021+ @ 5812, parent: i2c-0

[ 4857.817542@1] resume 0-003c+ @ 5812, parent: i2c-0

[ 4857.822414@1] resume 0-0038+ @ 5812, parent: i2c-0

[ 4857.827083@1] resume i2c-1+ @ 5812, parent: none

[ 4857.831767@1] resume 1-0068+ @ 5812, parent: i2c-1

[ 4857.836490@1] resume 1-001a+ @ 5812, parent: i2c-1

[ 4857.841313@1] resume i2c-2+ @ 5812, parent: none

[ 4857.845826@1] resume 2-0034+ @ 5812, parent: i2c-2

[ 4857.850825@1] resume axp20-regulator.21+ @ 5812, parent: 2-0034

[ 4857.856510@1] resume axp20-regulator.22+ @ 5812, parent: 2-0034

[ 4857.862504@1] resume axp20-regulator.23+ @ 5812, parent: 2-0034

[ 4857.868308@1] resume axp20-regulator.24+ @ 5812, parent: 2-0034

[ 4857.874292@1] resume axp20-regulator.25+ @ 5812, parent: 2-0034

[ 4857.880197@1] resume axp20-regulator.26+ @ 5812, parent: 2-0034

[ 4857.886014@1] resume axp20-regulator.27+ @ 5812, parent: 2-0034

[ 4857.891997@1] resume axp20-supplyer.28+ @ 5812, parent: 2-0034

[ 4857.899060@1] resume axp20-gpio.29+ @ 5812, parent: 2-0034

[ 4857.903333@1] resume amcanvas+ @ 5812, parent: platform

[ 4857.908434@1] resume regulatory.0+ @ 5812, parent: platform

[ 4857.920268@1] m3 nand resume entered

[ 4857.920620@0] resume 2-1+ @ 6187, parent: usb2

[ 4857.921134@1] resume input0+ @ 5812, parent: m1-adckp.0

[ 4857.921618@1] resume input1+ @ 5812, parent: meson-keyinput.0

[ 4857.922129@1] resume input2+ @ 5812, parent: axp20-supplyer.28

[ 4857.922468@1] resume reg-20-cs-ldo2+ @ 5812, parent: platform

[ 4857.922559@1] resume reg-20-cs-ldo3+ @ 5812, parent: platform

[ 4857.922640@1] resume reg-20-cs-ldo4+ @ 5812, parent: platform

[ 4857.922718@1] resume reg-20-cs-buck2+ @ 5812, parent: platform

[ 4857.922796@1] resume reg-20-cs-buck3+ @ 5812, parent: platform

[ 4857.922873@1] resume reg-20-cs-ldoio0+ @ 5812, parent: platform

[ 4857.922942@1] audiodsp resumed

[ 4857.977529@1] resume alarm+ @ 5812, parent: platform

[ 4857.984462@1] resume boot_monitor+ @ 5812, parent: platform

[ 4857.984907@0] reset gpo !

[ 4857.990832@1] resume snd-soc-dummy+ @ 5812, parent: platform

[ 4857.996083@1] resume soc-audio+ @ 5812, parent: platform

[ 4858.001550@1] enter rt5631_resume_pre

[ 4858.001999@1] resume input3+ @ 5812, parent: card0

[ 4858.006183@1] resume input4+ @ 5812, parent: none

[ 4858.011368@1] resume mali_dev.0+ @ 5812, parent: platform

[ 4858.016241@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_resume

[ 4858.022995@1] resume memorycard0:sdio:1+ @ 5812, parent: memorycard0:sdio

[ 4858.029392@1] bcmsdh_sdmmc_resume

[ 4858.032824@1] resume memorycard0:sdio:2+ @ 5812, parent: memorycard0:sdio

[ 4858.039451@1] bcmsdh_sdmmc_resume

[ 4858.042932@1] dhd resume, late probe bcmsdh

[ 4858.043028@1] ***Entered drivers/amlogic/cardreader/sd/sd.c:sd_resume

[ 4858.049424@1] PM: resume of devices complete after 1216.517 msecs

[ 4858.060666@1] Restarting tasks ...

[ 4858.061433@0] usb 2-1: USB disconnect, device number 10

[ 4858.115011@1] request_suspend_state: wakeup (3->0) at 4858114845995 (2013-01-31 13:00:42.066029000 UTC)

[ 4858.129900@1] done.

[ 4858.130023@0] enter rt5631_set_bias_level level: 2

[ 4858.130865@0] enter rt5631_set_bias_level level: 2

[ 4858.134697@0] enter rt5631_set_bias_level level: 3

[ 4858.134784@1] enter rt5631_set_bias_level level: 3

[ 4858.149534@0] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0

[ 4858.170486@0] option 2-1:1.0: device disconnected

[ 4858.140372@1] mali_meson_poweron: Interrupt received.

[ 4858.273761@1] rt5631 hp unpluged

[ 4858.282361@1] ***Entered sound/soc/aml/aml_dai.c:aml_dai_i2s_resume

[ 4858.283159@1] enter rt5631_resume_post

[ 4858.288937@0] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1

[ 4858.298903@0] option 2-1:1.1: device disconnected

[ 4858.316908@0] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2

[ 4858.326814@0] option 2-1:1.2: device disconnected

[ 4858.341715@0] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3

[ 4858.363374@0] option 2-1:1.3: device disconnected

[ 4858.381346@0] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4

[ 4858.406352@0] option 2-1:1.4: device disconnected

[ 4858.460831@1] sd_mmc_info->card_type=0

[ 4858.461054@1] begin SDIO check ......

[ 4858.485614@0] sdio_timeout_int_times = 0; timeout = 498

[ 4858.490946@1] ** disable watchdog

[ 4858.491177@1] suspend: exit suspend, ret = 0 (2013-01-31 13:00:42.442330999 UTC)

[ 4858.496794@1] late clk HHI_VIID_CLK_CNTL(f110412c) on

[ 4858.508754@0] sdio_timeout_int_times = 0; timeout = 498

[ 4858.509033@0] SEND OP timeout @1

[ 4858.511407@1] late clk HHI_VID_CLK_CNTL(f110417c) on

[ 4858.511454@1] sys_resume

[ 4858.511497@1] DWC_OTG: going early resume

[ 4858.511532@1] DWC_OTG: going early resume

[ 4858.511580@1] osd_ext_resumed

[ 4858.511614@1] osd_resumed

[ 4858.548106@0] begin SD&SDHC check ......

[ 4858.560748@0] set type to SDHC

[ 4858.584788@1] BT_RADIO going: on

[ 4858.584802@1] BCM_BT: going ON

[ 4858.610104@1] bcmsdh_sdmmc_late_resume: enter

[ 4858.610116@1] schedule sdioinfo->tqueue

[ 4858.610131@1] bcmsdh_sdmmc_late_resume: enter

[ 4858.610558@1] ==ft5x0x_ts_resume=

[ 4858.610573@1] enter -----> aml_gt2005_late_resume

[ 4858.610579@1] aml_m1_nand_early resume entered

[ 4858.610583@1] aml_m1_nand_early resume entered

[ 4858.610589@1] lcd_resume

[ 4858.610594@1]

[ 4858.610596@1] Init LCD type: LVDS.

[ 4858.610601@1] lcd frame rate=603/10.

[ 4858.610608@1] set_pll_lvds

[ 4858.610614@1] ss_level=0, pll_sel=1, pll_div_sel=1, vclk_sel=1, pll_reg=0x1023d, div_reg=0x1e913, xd=1.

[ 4858.610619@1] setup lcd clk.

[ 4858.612179@1] call bcmsdh_probe

[ 4858.612192@1] [extern_wifi_set_enable] in

[ 4858.612217@1] WIFI  Disable!

[ 4858.612421@1] [extern_wifi_set_enable] in

[ 4858.612433@1] WIFI  Enable!

[ 4858.630126@0] venc_set_lvds

[ 4858.630139@0] set_control_lvds

[ 4858.630144@0] init_lvds_phy

[ 4858.630421@0] m6g02_d7_lcd_power_ctrl() Power ON

[ 4858.660071@0] Changing baud for line 1 from 2000000 to 115200

[ 4858.680579@0] m6g02_d7_lvds_ports_ctrl: ON

[ 4858.680618@0] m6g02_d7_backlight_power_ctrl() Power ON

[ 4858.700053@0] Changing baud for line 1 from 115200 to 2000000

[ 4859.030982@0] S18A : 0

[ 4859.070039@0] Changing baud for line 1 from 2000000 to 115200

[ 4859.090444@0] Got RCA = 4660

[ 4859.091187@0]

[ 4859.091190@0] ***********CID*************

[ 4859.093407@0] 02:54:4d:53:41:30:38:47:04:9c:00:00:58:00:a2:00:

[ 4859.099049@0] MID[8]=2

[ 4859.101621@0] OID[16]=TM

[ 4859.104084@0] PNM[40]=SA08G

[ 4859.106861@0] PRV[8]=4

[ 4859.109205@0] PSN[32]=0x5800009c

[ 4859.112439@0] Reserved[4]=0

[ 4859.115194@0] year[8].month[4]=2010.2

[ 4859.118839@0] NotUsed[1]=0

[ 4859.121670@0] CRC[7]=0

[ 4859.121673@0]

[ 4859.126251@0]

[ 4859.126253@0] ********** CSD v2 **************

[ 4859.131626@0] 40:0e:00:32:5b:59:00:00:3b:67:7f:80:0a:40:00:00:

[ 4859.137240@0] CSD_STRUCTURE[2]=1

[ 4859.140771@0] Reserved1[6]=0

[ 4859.143680@0] TAAC[8]=14

[ 4859.146018@0] NSAC[8]=0

[ 4859.148437@0] TRAN_SPEED[8]=50

[ 4859.151647@0] CCC[8+4]=0x5b5

[ 4859.154341@0] READ_BL_LEN[4]=9

[ 4859.157378@0] READ_BL_PARTIAL[1]=0

[ 4859.160795@0] Changing baud for line 1 from 115200 to 2000000

[ 4859.166496@0] WRITE_BLK_MISALIGN[1]=0

[ 4859.170150@0] READ_BLK_MISALIGN[1]=0

[ 4859.173697@0] DSR_IMP[1]=0

[ 4859.176387@0] Reserved2[4]=0

[ 4859.179257@0] Reserved3[2]=0

[ 4859.182264@0] C_SIZE[6+8+8]=15207

[ 4859.185415@0] Reserved4[1]=0

[ 4859.188279@0] ERASE_BLK_EN[1]=1

[ 4859.191440@0] SECTOR_SIZE[6+1]=127

[ 4859.194910@0] WP_GRP_SIZE[7]=0

[ 4859.197916@0] WP_GRP_ENABLE[1]=0

[ 4859.201152@0] Reserved5[2]=0

[ 4859.204091@0] R2W_FACTOR[3]=2

[ 4859.206920@0] WRITE_BL_LEN[2+2]=9

[ 4859.210312@0] WRITE_BL_PARTIAL[1]=0

[ 4859.213641@0] Reserved6[5]=0

[ 4859.216489@0] FILE_FORMAT_GRP[1]=0

[ 4859.219977@0] COPY[1]=0

[ 4859.222419@0] PERM_WRITE_PROTECT[1]=0

[ 4859.225950@0] TMP_WRITE_PROTECT[1]=0

[ 4859.229516@0] FILE_FORMAT[2]=0

[ 4859.232643@0] Reserved7[2]=0

[ 4859.236120@0] CRC[7]=0

[ 4859.237824@0] NotUsed[1]=0

[ 4859.237827@0]

[ 4859.242709@0] total block nums : 0xeda000(15572992)

[ 4859.248231@0]

[ 4859.248235@0] ***********SCR*************

[ 4859.252845@0] 02:35:80:00:01:00:00:00:

[ 4859.256181@0] SD_SPEC[4]=2

[ 4859.259094@0] SCR_STRUCTURE[4]=0

[ 4859.262315@0] SD_BUS_WIDTHS[4]=5

[ 4859.265487@0] SD_SECURITY[3]=3

[ 4859.268492@0] DATA_STAT_AFTER_ERASE[1]=0

[ 4859.272541@0] Rsv1[7]=0

[ 4859.274819@0] SD_SPEC3[1]=1

[ 4859.277607@0] CMD_SUPPORT[2]=0

[ 4859.280650@0] Rsv2[6]=0

[ 4859.283065@0] Reserved2[32]=1

[ 4859.283067@0]

[ 4859.289576@0] 00648001 80018001 80018001 80030000

[ 4859.292439@0] 01000000 00000000 00000000 00000000

[ 4859.297213@0] 00000000 00000000 00000000 00000000

[ 4859.301987@0] 00000000 00000000 00000000 00000000

[ 4859.306762@0]

[ 4859.306764@0] ****************switch status****************

[ 4859.313982@0] Data_Struction_Verion : 0

[ 4859.317785@0] Max_Current_Consumption : 100

[ 4859.322009@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 4859.326491@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 4859.331171@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 4859.335529@0] init timer

[ 4859.338205@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 4859.342998@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 4859.347044@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 4859.351551@0] Function_Group_Status6 : 0

[ 4859.355824@0] Function_Group_Status5 : 0

[ 4859.359829@0] Function_Group_Status4 : 0

[ 4859.363575@0] Function_Group_Status3 : 0

[ 4859.367235@0] Function_Group_Status2 : 0

[ 4859.371167@0] Function_Group_Status1 : 1

[ 4859.371171@0]

[ 4859.377649@0] 00648001 80018001 80018001 80030000

[ 4859.381409@0] 01000000 00000000 00000000 00000000

[ 4859.386183@0] 00000000 00000000 00000000 00000000

[ 4859.390956@0] 00000000 00000000 00000000 00000000

[ 4859.395732@0]

[ 4859.395734@0] ****************switch status****************

[ 4859.402976@0] Data_Struction_Verion : 0

[ 4859.406755@0] Max_Current_Consumption : 100

[ 4859.410954@0] Support[0] : 0x8001	Busy[0] : 0x0

[ 4859.415435@0] Support[1] : 0x8001	Busy[1] : 0x0

[ 4859.419949@0] Support[2] : 0x8001	Busy[2] : 0x0

[ 4859.424463@0] Support[3] : 0x8001	Busy[3] : 0x0

[ 4859.429032@0] Support[4] : 0x8001	Busy[4] : 0x0

[ 4859.434148@0] Support[5] : 0x8003	Busy[5] : 0x0

[ 4859.438042@0] Function_Group_Status6 : 0

[ 4859.442020@0] Function_Group_Status5 : 0

[ 4859.445893@0] Function_Group_Status4 : 0

[ 4859.449779@0] Function_Group_Status3 : 0

[ 4859.454029@0] Function_Group_Status2 : 0

[ 4859.457589@0] Function_Group_Status1 : 1

[ 4859.457593@0]

[ 4859.463823@0] monitor : resume

[ 4859.463964@1] [extern_wifi_set_enable] in

[ 4859.463977@1] WIFI  Enable!

[ 4859.901492@1] sd_mmc_info->card_type=0

[ 4859.901515@1] begin SDIO check ......

[ 4859.960718@1] Got RCA = 1

[ 4859.961572@1] =========== WLAN placed in POWER ON ========

[ 4859.982520@1] dhd_customer_oob_irq_map: customer specific Host GPIO number is (101)

[ 4859.983538@1] F1 signature read @0x18000000=0x16044330

[ 4860.102805@1] DHD: dongle ram size is set to 294912(orig 294912)

[ 4860.102969@1] dhd_bus_select_firmware_name_by_chip: firmware_path=/system/etc/wifi/40183/fw_bcm40183b2.bin

[ 4860.109627@1] wl_create_event_handler thr:1aa2 started

[ 4860.113228@1] wl_iw_attach thr:1aa3 started

[ 4860.113462@1] wl_iw_bt_init thr:1aa4 started

[ 4860.113680@1] dhd_attach thr:1aa5 started

[ 4860.113826@1] dhd_attach thr:1aa6 started

[ 4860.113960@1] dhd_attach thr:1aa7 started

[ 4860.151014@1] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33

[ 4860.153940@1] [extern_wifi_set_enable] in

[ 4860.162502@1] WIFI  Disable!

[ 4860.162600@1] =========== WLAN placed in RESET ========

[ 4860.183142@1] dhd_bus_select_firmware_name_by_chip: firmware_path=/system/etc/wifi/40183/fw_bcm40183b2.bin

[ 4860.183194@1]

[ 4860.183203@1] Dongle Host Driver, version 5.90.195.26.1.6.1

[ 4860.183216@1] Compiled in drivers/net/wireless/bcmdhd on Jan 30 2013 at 18:00:05

[ 4860.183235@1] wl_android_wifi_on in

[ 4860.183258@1] [extern_wifi_set_enable] in

[ 4860.183358@1] WIFI  Disable!

[ 4860.183573@1] [extern_wifi_set_enable] in

[ 4860.183607@1] WIFI  Enable!

[ 4860.183861@1] [extern_wifi_set_enable] in

[ 4860.183895@1] WIFI  Enable!

[ 4860.488098@1] del timer

[ 4860.622999@0] init timer

[ 4860.660231@0] Indeed it is in host mode hprt0 = 00021501

[ 4860.660416@1] sd_mmc_info->card_type=0

[ 4860.663723@1] begin SDIO check ......

[ 4860.730571@0] Got RCA = 1

[ 4860.731663@0] =========== WLAN going back to live  ========

[ 4860.775786@0] F1 signature read @0x18000000=0x16044330

[ 4860.827244@0] DHD: dongle ram size is set to 294912(orig 294912)

[ 4860.827874@0] dhd_bus_select_firmware_name_by_chip: firmware_path=/system/etc/wifi/40183/fw_bcm40183b2.bin

[ 4860.910161@1] usb 2-1: new high speed USB device number 11 using dwc_otg

[ 4860.911840@1] Indeed it is in host mode hprt0 = 00001101

[ 4860.921659@0] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.

[ 4861.092974@0] bcmsdh_register_oob_intr Enter

[ 4861.093003@0] bcmsdh_register_oob_intr IRQ=101 Type=411

[ 4861.094455@0] Firmware up: op_mode=1, Broadcom Dongle Host Driver mac=00:22:f4:1d:c2:2b

[ 4861.152960@0] usb 2-1: New USB device found, idVendor=19f5, idProduct=9013

[ 4861.154303@0] usb 2-1: New USB device strings: Mfr=4, Product=3, SerialNumber=0

[ 4861.162991@0] usb 2-1: Product: Qualcomm CDMA Technologies MSM

[ 4861.163022@0] usb 2-1: Manufacturer: Qualcomm, Incorporated

[ 4861.174475@1] dhd_rx_frame: net device is NOT registered yet. drop packet

[ 4861.180119@1] dhd_rx_frame: net device is NOT registered yet. drop packet

[ 4861.180889@1] Firmware version = wl0: Mar 27 2012 17:31:15 version 5.90.195.26.1 FWID 01-3a1206ab

[ 4861.254442@0] Unknown PRIVATE command BTCOEXSCAN-STOP - ignored

[ 4861.255214@0] Unknown PRIVATE command RXFILTER-ADD 3 - ignored

[ 4861.261031@0] Unknown PRIVATE command RXFILTER-START - ignored

[ 4861.261178@0] Unknown PRIVATE command RXFILTER-STOP - ignored

[ 4861.261287@0] Unknown PRIVATE command RXFILTER-REMOVE 2 - ignored

[ 4861.261397@0] Unknown PRIVATE command RXFILTER-START - ignored

[ 4861.285349@1] wl_iw_set_country: set country for RU as RU rev -1 is OK

[ 4861.304654@0] option 2-1:1.0: GSM modem (1-port) converter detected

[ 4861.306192@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0

[ 4861.306760@0] option 2-1:1.1: GSM modem (1-port) converter detected

[ 4861.308055@0] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1

[ 4861.309791@1] option 2-1:1.2: GSM modem (1-port) converter detected

[ 4861.310922@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2

[ 4861.311342@1] option 2-1:1.3: GSM modem (1-port) converter detected

[ 4861.312247@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3

[ 4861.312652@1] option 2-1:1.4: GSM modem (1-port) converter detected

[ 4861.313410@1] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB4

[ 4866.640050@0] no date transfer occure in 6s

[ 4871.780150@1] wlan0: no IPv6 routers present

[ 4872.660118@0] no date transfer occure in 6s

[ 4877.680518@1] wl_iw_set_wpaauth: 5962: setting wpa_auth to 0xc0

[ 4877.689859@1] wl_iw_set_essid: join SSID=153 ch=1

[ 4877.777189@1] wl_bss_connect_done succeeded

[ 4877.834720@1] wl_bss_connect_done succeeded

[ 4878.680038@0] no date transfer occure in 6s

[ 4884.700050@0] no date transfer occure in 6s

[ 4890.720060@0] no date transfer occure in 6s

[ 4896.575935@0] Unknown PRIVATE command BTCOEXSCAN-START - ignored

[ 4896.740098@0] acl_tx

[ 4896.740163@0] date transfer occure in 6s

[ 4896.784235@0] Unknown PRIVATE command BTCOEXSCAN-START - ignored

[ 4902.760162@0] acl_tx

[ 4902.760260@0] date transfer occure in 6s

[ 4908.780077@0] acl_tx

[ 4908.780126@0] date transfer occure in 6s

[ 4914.800029@0] acl_tx

[ 4914.800044@0] date transfer occure in 6s

[ 4920.820095@0] acl_tx

[ 4920.820126@0] date transfer occure in 6s

[ 4926.617193@1] SurfaceFlinger: page allocation failure: order:6, mode:0xd1

[ 4926.617243@1] [<c0015aa0>] (unwind_backtrace+0x0/0xf0) from [<c008642c>] (warn_alloc_failed+0xc4/0x114)

[ 4926.617259@1] [<c008642c>] (warn_alloc_failed+0xc4/0x114) from [<c0089d7c>] (__alloc_pages_nodemask+0x3d0/0x610)

[ 4926.617272@1] [<c0089d7c>] (__alloc_pages_nodemask+0x3d0/0x610) from [<c0016ee4>] (__dma_alloc+0x9c/0x3ec)

[ 4926.617283@1] [<c0016ee4>] (__dma_alloc+0x9c/0x3ec) from [<c00172b8>] (dma_alloc_coherent+0x58/0x60)

[ 4926.617381@1] [<c00172b8>] (dma_alloc_coherent+0x58/0x60) from [<bf01cd88>] (_mali_osk_mem_allocioregion+0x14/0x18 [mali])

[ 4926.617435@1] [<bf01cd88>] (_mali_osk_mem_allocioregion+0x14/0x18 [mali]) from [<bf015f08>] (os_allocator_allocate_page_table_block+0x148/0x250 [mali])

[ 4926.617474@1] [<bf015f08>] (os_allocator_allocate_page_table_block+0x148/0x250 [mali]) from [<bf0157a8>] (mali_allocation_engine_allocate_page_tables+0x20/0x60 [mali])

[ 4926.617511@1] [<bf0157a8>] (mali_allocation_engine_allocate_page_tables+0x20/0x60 [mali]) from [<bf01500c>] (mali_mmu_get_table_page+0x1bc/0x2d8 [mali])

[ 4926.617546@1] [<bf01500c>] (mali_mmu_get_table_page+0x1bc/0x2d8 [mali]) from [<bf013688>] (mali_mmu_pagedir_map+0x1d8/0x28c [mali])

[ 4926.617581@1] [<bf013688>] (mali_mmu_pagedir_map+0x1d8/0x28c [mali]) from [<bf0153ac>] (mali_allocation_engine_allocate_memory+0x28/0x1c4 [mali])

[ 4926.617616@1] [<bf0153ac>] (mali_allocation_engine_allocate_memory+0x28/0x1c4 [mali]) from [<bf014994>] (_mali_ukk_attach_ump_mem+0x110/0x18c [mali])

[ 4926.617657@1] [<bf014994>] (_mali_ukk_attach_ump_mem+0x110/0x18c [mali]) from [<bf01d95c>] (mem_attach_ump_wrapper+0x64/0xc4 [mali])

[ 4926.617695@1] [<bf01d95c>] (mem_attach_ump_wrapper+0x64/0xc4 [mali]) from [<c00c0054>] (do_vfs_ioctl+0x80/0x568)

[ 4926.617709@1] [<c00c0054>] (do_vfs_ioctl+0x80/0x568) from [<c00c0574>] (sys_ioctl+0x38/0x60)

[ 4926.617726@1] [<c00c0574>] (sys_ioctl+0x38/0x60) from [<c000e980>] (ret_fast_syscall+0x0/0x30)

[ 4926.617732@1] Mem-info:

[ 4926.617737@1] Normal per-cpu:

[ 4926.617742@1] CPU    0: hi:   90, btch:  15 usd:   0

[ 4926.617747@1] CPU    1: hi:   90, btch:  15 usd:   0

[ 4926.617751@1] HighMem per-cpu:

[ 4926.617756@1] CPU    0: hi:  186, btch:  31 usd:   0

[ 4926.617761@1] CPU    1: hi:  186, btch:  31 usd:   0

[ 4926.617771@1] active_anon:41720 inactive_anon:132 isolated_anon:0

[ 4926.617775@1]  active_file:22030 inactive_file:46840 isolated_file:0

[ 4926.617778@1]  unevictable:55 dirty:140 writeback:0 unstable:0

[ 4926.617781@1]  free:52587 slab_reclaimable:3797 slab_unreclaimable:2361

[ 4926.617784@1]  mapped:10880 shmem:157 pagetables:1585 bounce:0

[ 4926.617799@1] Normal free:132920kB min:32768kB low:40960kB high:49152kB active_anon:5268kB inactive_anon:0kB active_file:25204kB inactive_file:109164kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:345096kB mlocked:0kB dirty:0kB writeback:0kB mapped:2056kB shmem:0kB slab_reclaimable:15188kB slab_unreclaimable:9444kB kernel_stack:5200kB pagetables:236kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no

[ 4926.617813@1] lowmem_reserve[]: 0 4063 4063

[ 4926.617828@1] HighMem free:77428kB min:504kB low:12852kB high:25200kB active_anon:161612kB inactive_anon:528kB active_file:62916kB inactive_file:78196kB unevictable:220kB isolated(anon):0kB isolated(file):0kB present:520184kB mlocked:0kB dirty:560kB writeback:0kB mapped:41464kB shmem:628kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:6104kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no

[ 4926.617867@1] lowmem_reserve[]: 0 0 0

[ 4926.617874@1] Normal: 9936*4kB 4323*8kB 2664*16kB 473*32kB 9*64kB 2*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB 0*32768kB 0*65536kB 0*131072kB = 132920kB

[ 4926.617898@1] HighMem: 6307*4kB 3031*8kB 481*16kB 195*32kB 19*64kB 2*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 1*4096kB 1*8192kB 0*16384kB 0*32768kB 0*65536kB 0*131072kB = 77428kB

[ 4926.617921@1] 69085 total pagecache pages

[ 4926.642566@1] 218368 pages of RAM

[ 4926.642577@1] 56122 free pages

[ 4926.642581@1] 4970 reserved pages

[ 4926.642585@1] 5144 slab pages

[ 4926.642588@1] 172832 pages shared

[ 4926.642593@1] 0 pages swap cached

[ 4926.974835@0] acl_tx

[ 4926.974850@0] date transfer occure in 6s

[ 4932.980203@0] acl_tx

[ 4932.980373@0] date transfer occure in 6s

[ 4934.007822@1] wl_iw_set_country: set country for RU as RU rev -1 is OK

[ 4934.026347@0] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[ 4934.758616@1] wl_iw_set_wpaauth: 5962: setting wpa_auth to 0xc0

[ 4934.766790@1] wl_iw_set_essid: join SSID=153 ch=1

[ 4934.898467@1] wl_bss_connect_done succeeded

[ 4934.970231@1] wl_bss_connect_done succeeded

[ 4939.000376@0] no date transfer occure in 6s

[ 4945.020045@0] no date transfer occure in 6s

[ 4945.570212@1] wlan0: no IPv6 routers present

[ 4951.040211@0] no date transfer occure in 6s

[ 4957.060059@0] no date transfer occure in 6s

[ 4963.080238@0] no date transfer occure in 6s

[ 4969.100231@0] no date transfer occure in 6s

[ 4975.120211@0] no date transfer occure in 6s

[ 4981.140210@0] no date transfer occure in 6s

[ 4987.160225@0] no date transfer occure in 6s

[ 4993.180182@0] no date transfer occure in 6s

[ 4999.200237@0] no date transfer occure in 6s

[ 5005.220184@0] no date transfer occure in 6s

[ 5011.240208@0] no date transfer occure in 6s

[ 5017.260231@0] no date transfer occure in 6s

[ 5023.280056@0] acl_tx

[ 5023.280076@0] date transfer occure in 6s

[ 5029.300049@0] acl_tx

[ 5029.300114@0] date transfer occure in 6s

[ 5035.320063@0] no date transfer occure in 6s

[ 5041.340066@0] no date transfer occure in 6s

[ 5047.360070@0] no date transfer occure in 6s

[ 5053.380037@0] no date transfer occure in 6s

[ 5059.400057@0] no date transfer occure in 6s

[ 5065.420071@0] no date transfer occure in 6s

[ 5071.440191@0] no date transfer occure in 6s

[ 5077.460057@0] acl_tx

[ 5077.460073@0] date transfer occure in 6s

[ 5083.480148@0] acl_tx

[ 5083.480204@0] date transfer occure in 6s

[ 5085.334545@1] SurfaceFlinger: page allocation failure: order:6, mode:0xd1

[ 5085.335891@1] [<c0015aa0>] (unwind_backtrace+0x0/0xf0) from [<c008642c>] (warn_alloc_failed+0xc4/0x114)

[ 5085.335910@1] [<c008642c>] (warn_alloc_failed+0xc4/0x114) from [<c0089d7c>] (__alloc_pages_nodemask+0x3d0/0x610)

[ 5085.335923@1] [<c0089d7c>] (__alloc_pages_nodemask+0x3d0/0x610) from [<c0016ee4>] (__dma_alloc+0x9c/0x3ec)

[ 5085.335935@1] [<c0016ee4>] (__dma_alloc+0x9c/0x3ec) from [<c00172b8>] (dma_alloc_coherent+0x58/0x60)

[ 5085.336073@1] [<c00172b8>] (dma_alloc_coherent+0x58/0x60) from [<bf01cd88>] (_mali_osk_mem_allocioregion+0x14/0x18 [mali])

[ 5085.336130@1] [<bf01cd88>] (_mali_osk_mem_allocioregion+0x14/0x18 [mali]) from [<bf015f08>] (os_allocator_allocate_page_table_block+0x148/0x250 [mali])

[ 5085.336170@1] [<bf015f08>] (os_allocator_allocate_page_table_block+0x148/0x250 [mali]) from [<bf0157a8>] (mali_allocation_engine_allocate_page_tables+0x20/0x60 [mali])

[ 5085.336208@1] [<bf0157a8>] (mali_allocation_engine_allocate_page_tables+0x20/0x60 [mali]) from [<bf01500c>] (mali_mmu_get_table_page+0x1bc/0x2d8 [mali])

[ 5085.336245@1] [<bf01500c>] (mali_mmu_get_table_page+0x1bc/0x2d8 [mali]) from [<bf013688>] (mali_mmu_pagedir_map+0x1d8/0x28c [mali])

[ 5085.336281@1] [<bf013688>] (mali_mmu_pagedir_map+0x1d8/0x28c [mali]) from [<bf0153ac>] (mali_allocation_engine_allocate_memory+0x28/0x1c4 [mali])

[ 5085.336319@1] [<bf0153ac>] (mali_allocation_engine_allocate_memory+0x28/0x1c4 [mali]) from [<bf014994>] (_mali_ukk_attach_ump_mem+0x110/0x18c [mali])

[ 5085.336362@1] [<bf014994>] (_mali_ukk_attach_ump_mem+0x110/0x18c [mali]) from [<bf01d95c>] (mem_attach_ump_wrapper+0x64/0xc4 [mali])

[ 5085.336401@1] [<bf01d95c>] (mem_attach_ump_wrapper+0x64/0xc4 [mali]) from [<c00c0054>] (do_vfs_ioctl+0x80/0x568)

[ 5085.336416@1] [<c00c0054>] (do_vfs_ioctl+0x80/0x568) from [<c00c0574>] (sys_ioctl+0x38/0x60)

[ 5085.336435@1] [<c00c0574>] (sys_ioctl+0x38/0x60) from [<c000e980>] (ret_fast_syscall+0x0/0x30)

[ 5085.336441@1] Mem-info:

[ 5085.336446@1] Normal per-cpu:

[ 5085.336451@1] CPU    0: hi:   90, btch:  15 usd:   0

[ 5085.336457@1] CPU    1: hi:   90, btch:  15 usd:   0

[ 5085.336462@1] HighMem per-cpu:

[ 5085.336466@1] CPU    0: hi:  186, btch:  31 usd:   0

[ 5085.336471@1] CPU    1: hi:  186, btch:  31 usd:   0

[ 5085.336483@1] active_anon:45963 inactive_anon:129 isolated_anon:0

[ 5085.336486@1]  active_file:30776 inactive_file:47851 isolated_file:0

[ 5085.336490@1]  unevictable:55 dirty:5 writeback:0 unstable:0

[ 5085.336493@1]  free:36490 slab_reclaimable:3802 slab_unreclaimable:2513

[ 5085.336496@1]  mapped:12564 shmem:155 pagetables:1684 bounce:0

[ 5085.336512@1] Normal free:132880kB min:32768kB low:40960kB high:49152kB active_anon:1752kB inactive_anon:0kB active_file:25052kB inactive_file:107940kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:345096kB mlocked:0kB dirty:0kB writeback:0kB mapped:960kB shmem:0kB slab_reclaimable:15208kB slab_unreclaimable:10052kB kernel_stack:5216kB pagetables:28kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no

[ 5085.336526@1] lowmem_reserve[]: 0 4063 4063

[ 5085.336541@1] HighMem free:13080kB min:504kB low:12852kB high:25200kB active_anon:182100kB inactive_anon:516kB active_file:98052kB inactive_file:83464kB unevictable:220kB isolated(anon):0kB isolated(file):0kB present:520184kB mlocked:0kB dirty:20kB writeback:0kB mapped:49296kB shmem:620kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:6708kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no

[ 5085.336555@1] lowmem_reserve[]: 0 0 0

[ 5085.336562@1] Normal: 11036*4kB 5532*8kB 2724*16kB 12*32kB 2*64kB 1*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB 0*32768kB 0*65536kB 0*131072kB = 132880kB

[ 5085.336586@1] HighMem: 4*4kB 5*8kB 2*16kB 2*32kB 2*64kB 2*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 1*4096kB 1*8192kB 0*16384kB 0*32768kB 0*65536kB 0*131072kB = 13080kB

[ 5085.336610@1] 78850 total pagecache pages

[ 5085.361403@1] 218368 pages of RAM

[ 5085.361415@1] 41316 free pages

[ 5085.361419@1] 4970 reserved pages

[ 5085.361422@1] 5281 slab pages

[ 5085.361426@1] 189308 pages shared

[ 5085.361430@1] 0 pages swap cached

[ 5089.500111@0] acl_tx

[ 5089.500178@0] date transfer occure in 6s

[ 5095.520062@0] acl_tx

[ 5095.520092@0] date transfer occure in 6s

[ 5101.540045@0] acl_tx

[ 5101.540072@0] date transfer occure in 6s

[ 5107.560114@0] acl_tx

[ 5107.560154@0] date transfer occure in 6s

[ 5113.580039@0] acl_tx

[ 5113.580062@0] date transfer occure in 6s

[ 5116.396379@1] amlogic camera driver: gt2005_v4l2_init.

[ 5116.482083@1] +++found a init function, and run it..

[ 5116.546345@1] GT2005_write_regs success in initial GT2005.

[ 5116.700289@0] +++found a uninit function, and run it..

[ 5116.870141@1] gc0308_init OK!!!!

[ 5116.870235@1] +++found a init function, and run it..

[ 5116.908146@0] GC0308_write_regs success in initial GC0308.

[ 5116.908283@0] GC0308_write_custom_regs success in initial GC0308.

[ 5117.146555@0] amlogic camera driver: gc0308_v4l2_uninit.

[ 5117.160126@0] +++found a uninit function, and run it..

[ 5119.600060@0] acl_tx

[ 5119.600078@0] date transfer occure in 6s

[ 5123.827452@1] [dsp]dsp_open

[ 5123.827494@1] audiodsp prevent sleep

[ 5123.881533@0] [dsp]load mcode size=215600

[ 5123.881537@0] ,load addr 0xc4000000 mcode name audiodsp_codec_aac_helix.bin

[ 5123.888961@0] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 5123.892758@0] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 5123.905644@0] [dsp]DSP heap start =0x99200000,size=0x100000

[ 5123.905897@0] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 5123.911706@0] reset dsp : dec opt=ffff, subid=0

[ 5123.916151@0] [dsp]dsp reset now

[ 5123.950085@0] [dsp]dsp status=52756e

[ 5123.950156@0] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 5123.957953@0] [dsp][arc]actural aac audio sr 16000.ch num 1

[ 5123.957965@0] [arc]send audioinfo to mcpu,valid 0x1c

[ 5123.960020@0] [dsp]frame format changed,fmt->valid 0x1c

[ 5123.973932@0] [dsp]audio info from header: sr 16000,ch 1

[ 5123.978935@0] [dsp]applied audio sr 16000,ch num 1

[ 5123.984506@0] audio pts started::::::: 0

[ 5123.988893@0] audio pts started::::::: 1

[ 5125.620107@0] acl_tx

[ 5125.620125@0] date transfer occure in 6s

[ 5125.809758@0] [dsp][arc]audio dsp halted now,ES rd offset 15386,decoded pcm bytes 106976,51pcm bytes 0

[ 5125.820699@1] [dsp]dsp_release

[ 5125.820742@1] audiodsp allow sleep

[ 5125.821805@0] adec_release

[ 5131.640046@0] acl_tx

[ 5131.640067@0] date transfer occure in 6s

[ 5137.660049@0] acl_tx

[ 5137.660065@0] date transfer occure in 6s

[ 5143.680032@0] acl_tx

[ 5143.680046@0] date transfer occure in 6s

[ 5149.700041@0] no date transfer occure in 6s

[ 5155.720105@0] acl_tx

[ 5155.720133@0] date transfer occure in 6s

[ 5161.740064@0] acl_tx

[ 5161.740092@0] date transfer occure in 6s

[ 5167.760197@0] no date transfer occure in 6s

[ 5173.780179@0] no date transfer occure in 6s

[ 5179.800041@0] no date transfer occure in 6s

[ 5185.820186@0] no date transfer occure in 6s

[ 5191.840073@0] no date transfer occure in 6s

[ 5197.860222@0] no date transfer occure in 6s

[ 5203.880046@0] no date transfer occure in 6s

[ 5209.900043@0] acl_tx

[ 5209.900079@0] date transfer occure in 6s

[ 5215.920059@0] acl_tx

[ 5215.920100@0] date transfer occure in 6s

[ 5221.940023@0] acl_tx

[ 5221.940034@0] date transfer occure in 6s

[ 5227.960064@0] acl_tx

[ 5227.960096@0] date transfer occure in 6s

[ 5233.980119@0] acl_tx

[ 5233.980173@0] date transfer occure in 6s

[ 5240.000082@0] acl_tx

[ 5240.000110@0] date transfer occure in 6s

[ 5246.020091@0] acl_tx

[ 5246.020148@0] date transfer occure in 6s

[ 5252.040055@0] acl_tx

[ 5252.040113@0] date transfer occure in 6s

[ 5258.060044@0] acl_tx

[ 5258.060083@0] date transfer occure in 6s

[ 5264.080263@0] acl_tx

[ 5264.080385@0] date transfer occure in 6s

[ 5264.488651@0] wl_iw_set_suspend: Suspend Flag 0 -> 1

[ 5264.861904@1] [dsp]dsp_open

[ 5264.861936@1] audiodsp prevent sleep

[ 5264.863899@1] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 5264.868359@1] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 5264.924718@1] [dsp]DSP heap start =0x99200000,size=0x100000

[ 5264.930399@1] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 5264.930806@1] reset dsp : dec opt=ffff, subid=0

[ 5264.935320@1] [dsp]dsp reset now

[ 5264.970710@1] [dsp]dsp status=52756e

[ 5264.970790@1] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 5264.972603@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 5264.972613@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 5264.972616@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 5264.972620@0] [arc]register audioin capture  filter lib

[ 5264.972622@0] [arc]register audiout mixed  filter lib

[ 5264.972625@0] [arc]register audio resample  filter lib

[ 5264.972628@0] [arc]register tshd  filter lib

[ 5264.972630@0] [arc]register eq  filter lib

[ 5264.972633@0] [arc]alsa audio out sr 44100

[ 5264.972635@0] [arc]register helix aac lib

[ 5264.972638@0] [arc]have register a dsp codec before!!!

[ 5264.972640@0] [arc]System clock is 209333333

[ 5264.972643@0] [arc]

[ 5264.972645@0]

[ 5264.972646@0] decode a header frame to get the frame format

[ 5264.972649@0]

[ 5264.975091@0] [dsp]frame format changed,fmt->valid 0x1c

[ 5264.975515@0] [dsp][arc]actural aac audio sr 16000.ch num 1

[ 5264.975523@0] [arc]send audioinfo to mcpu,valid 0x1c

[ 5265.078494@1] [dsp]audio info from header: sr 16000,ch 1

[ 5265.078560@1] [dsp]applied audio sr 16000,ch num 1

[ 5265.085981@0] audio pts started::::::: 0

[ 5265.088124@0] audio pts started::::::: 1

[ 5266.105606@0] [dsp][arc]audio dsp halted now,ES rd offset 15748,decoded pcm bytes 86560,51pcm bytes 0

[ 5266.120307@1] [dsp]dsp_release

[ 5266.120388@1] audiodsp allow sleep

[ 5266.121701@0] adec_release

[ 5266.125818@1] [dsp]dsp_open

[ 5266.126691@1] audiodsp prevent sleep

[ 5266.131742@1] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 5266.139885@1] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 5266.164572@1] [dsp]DSP heap start =0x99200000,size=0x100000

[ 5266.165186@1] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 5266.170620@1] reset dsp : dec opt=ffff, subid=0

[ 5266.170637@1] [dsp]dsp reset now

[ 5266.203854@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 5266.203883@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 5266.203896@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 5266.203910@0] [arc]register audioin capture  filter lib

[ 5266.203921@0] [arc]register audiout mixed  filter lib

[ 5266.203931@0] [arc]register audio resample  filter lib

[ 5266.203942@0] [arc]register tshd  filter lib

[ 5266.203952@0] [arc]register eq  filter lib

[ 5266.203961@0] [arc]alsa audio out sr 44100

[ 5266.203970@0] [arc]register helix aac lib

[ 5266.203979@0] [arc]have register a dsp codec before!!!

[ 5266.203990@0] [arc]System clock is 209333333

[ 5266.203999@0] [arc]

[ 5266.204006@0]

[ 5266.204012@0] decode a header frame to get the frame format

[ 5266.204023@0]

[ 5266.281131@1] [dsp]dsp status=52756e

[ 5266.281268@1] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 5266.290260@0] [dsp]audio info from header: sr 16000,ch 1

[ 5266.294713@0] [dsp]applied audio sr 16000,ch num 1

[ 5266.305760@0] audio pts started::::::: 0

[ 5266.307465@0] audio pts started::::::: 1

[ 5266.411113@0] [dsp][arc]audio dsp halted now,ES rd offset 0,decoded pcm bytes 0,51pcm bytes 0

[ 5266.430155@0] [dsp]dsp_release

[ 5266.430254@0] audiodsp allow sleep

[ 5266.431655@0] adec_release

[ 5266.435562@1] [dsp]dsp_open

[ 5266.436540@1] audiodsp prevent sleep

[ 5266.443422@1] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 5266.459560@0] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 5266.481233@0] [dsp]DSP heap start =0x99200000,size=0x100000

[ 5266.481655@0] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 5266.489273@1] reset dsp : dec opt=ffff, subid=0

[ 5266.492483@1] [dsp]dsp reset now

[ 5266.527836@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 5266.527867@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 5266.527880@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 5266.527894@0] [arc]register audioin capture  filter lib

[ 5266.527904@0] [arc]register audiout mixed  filter lib

[ 5266.527916@0] [arc]register audio resample  filter lib

[ 5266.527926@0] [arc]register tshd  filter lib

[ 5266.527936@0] [arc]register eq  filter lib

[ 5266.527945@0] [arc]alsa audio out sr 44100

[ 5266.527954@0] [arc]register helix aac lib

[ 5266.527964@0] [arc]have register a dsp codec before!!!

[ 5266.527975@0] [arc]System clock is 209333333

[ 5266.527984@0] [arc]

[ 5266.527991@0]

[ 5266.527998@0] decode a header frame to get the frame format

[ 5266.528009@0]

[ 5266.606031@1] [dsp]dsp status=52756e

[ 5266.606079@1] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 5266.613959@1] [dsp]audio info from header: sr 16000,ch 1

[ 5266.622806@1] [dsp]applied audio sr 16000,ch num 1

[ 5266.624451@1] audio pts started::::::: 0

[ 5266.629821@1] audio pts started::::::: 1

[ 5266.668681@0] [dsp][arc]audio dsp halted now,ES rd offset 0,decoded pcm bytes 0,51pcm bytes 0

[ 5266.680615@1] [dsp]dsp_release

[ 5266.680663@1] audiodsp allow sleep

[ 5266.681745@1] adec_release

[ 5266.684846@0] [dsp]dsp_open

[ 5266.691674@0] audiodsp prevent sleep

[ 5266.692459@0] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 5266.696223@0] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 5266.711962@0] [dsp]DSP heap start =0x99200000,size=0x100000

[ 5266.712117@0] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 5266.717937@0] reset dsp : dec opt=ffff, subid=0

[ 5266.723437@0] [dsp]dsp reset now

[ 5266.757944@1] wl_iw_set_suspend: Suspend Flag 1 -> 0

[ 5266.759489@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 5266.759499@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 5266.759502@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 5266.759506@0] [arc]register audioin capture  filter lib

[ 5266.759509@0] [arc]register audiout mixed  filter lib

[ 5266.759512@0] [arc]register audio resample  filter lib

[ 5266.759515@0] [arc]register tshd  filter lib

[ 5266.759517@0] [arc]register eq  filter lib

[ 5266.759520@0] [arc]alsa audio out sr 44100

[ 5266.759522@0] [arc]register helix aac lib

[ 5266.759525@0] [arc]have register a dsp codec before!!!

[ 5266.759528@0] [arc]System clock is 209333333

[ 5266.759530@0] [arc]

[ 5266.759532@0]

[ 5266.759534@0] decode a header frame to get the frame format

[ 5266.759537@0]

[ 5266.832564@1] [dsp]dsp status=52756e

[ 5266.837027@1] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 5266.850994@1] [dsp]audio info from header: sr 16000,ch 1

[ 5266.851078@1] [dsp]applied audio sr 16000,ch num 1

[ 5266.856857@1] audio pts started::::::: 0

[ 5266.861494@1] audio pts started::::::: 1

[ 5267.008036@0] [dsp][arc]audio dsp halted now,ES rd offset 0,decoded pcm bytes 0,51pcm bytes 0

[ 5267.021050@0] [dsp]dsp_release

[ 5267.021114@0] audiodsp allow sleep

[ 5267.025276@1] adec_release

[ 5267.029302@0] [dsp]dsp_open

[ 5267.029389@0] audiodsp prevent sleep

[ 5267.032047@1] wl_iw_set_suspend: Suspend Flag 0 -> 1

[ 5267.035845@0] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 5267.035866@0] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 5267.050513@0] [dsp]DSP heap start =0x99200000,size=0x100000

[ 5267.057113@0] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 5267.058879@0] reset dsp : dec opt=ffff, subid=0

[ 5267.063386@0] [dsp]dsp reset now

[ 5267.100100@1] [dsp]dsp status=52756e

[ 5267.100190@1] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 5267.102060@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 5267.102071@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 5267.102077@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 5267.102084@0] [arc]register audioin capture  filter lib

[ 5267.102089@0] [arc]register audiout mixed  filter lib

[ 5267.102093@0] [arc]register audio resample  filter lib

[ 5267.102098@0] [arc]register tshd  filter lib

[ 5267.102103@0] [arc]register eq  filter lib

[ 5267.102107@0] [arc]alsa audio out sr 44100

[ 5267.102111@0] [arc]register helix aac lib

[ 5267.102115@0] [arc]have register a dsp codec before!!!

[ 5267.102120@0] [arc]System clock is 209333333

[ 5267.102124@0] [arc]

[ 5267.102127@0]

[ 5267.102130@0] decode a header frame to get the frame format

[ 5267.102135@0]

[ 5267.185326@1] [dsp]audio info from header: sr 16000,ch 1

[ 5267.188230@1] [dsp]applied audio sr 16000,ch num 1

[ 5267.194487@1] audio pts started::::::: 0

[ 5267.198286@1] audio pts started::::::: 1

[ 5267.222035@0] [dsp][arc]audio dsp halted now,ES rd offset 0,decoded pcm bytes 0,51pcm bytes 0

[ 5267.240057@1] [dsp]dsp_release

[ 5267.240093@1] audiodsp allow sleep

[ 5267.242175@1] adec_release

[ 5270.100045@0] acl_tx

[ 5270.100064@0] date transfer occure in 6s

[ 5270.822065@1] wl_iw_set_suspend: Suspend Flag 1 -> 0

[ 5276.120073@0] acl_tx

[ 5276.120141@0] date transfer occure in 6s

[ 5279.786200@1] SurfaceFlinger: page allocation failure: order:6, mode:0xd1

[ 5279.787503@1] [<c0015aa0>] (unwind_backtrace+0x0/0xf0) from [<c008642c>] (warn_alloc_failed+0xc4/0x114)

[ 5279.800816@1] [<c008642c>] (warn_alloc_failed+0xc4/0x114) from [<c0089d7c>] (__alloc_pages_nodemask+0x3d0/0x610)

[ 5279.807010@1] [<c0089d7c>] (__alloc_pages_nodemask+0x3d0/0x610) from [<c0016ee4>] (__dma_alloc+0x9c/0x3ec)

[ 5279.817109@1] [<c0016ee4>] (__dma_alloc+0x9c/0x3ec) from [<c00172b8>] (dma_alloc_coherent+0x58/0x60)

[ 5279.826175@1] [<c00172b8>] (dma_alloc_coherent+0x58/0x60) from [<bf01cd88>] (_mali_osk_mem_allocioregion+0x14/0x18 [mali])

[ 5279.837257@1] [<bf01cd88>] (_mali_osk_mem_allocioregion+0x14/0x18 [mali]) from [<bf015f08>] (os_allocator_allocate_page_table_block+0x148/0x250 [mali])

[ 5279.851084@1] [<bf015f08>] (os_allocator_allocate_page_table_block+0x148/0x250 [mali]) from [<bf0157a8>] (mali_allocation_engine_allocate_page_tables+0x20/0x60 [mali])

[ 5279.866353@0] [<bf0157a8>] (mali_allocation_engine_allocate_page_tables+0x20/0x60 [mali]) from [<bf01500c>] (mali_mmu_get_table_page+0x1bc/0x2d8 [mali])

[ 5279.881309@1] [<bf01500c>] (mali_mmu_get_table_page+0x1bc/0x2d8 [mali]) from [<bf013688>] (mali_mmu_pagedir_map+0x1d8/0x28c [mali])

[ 5279.890941@0] [<bf013688>] (mali_mmu_pagedir_map+0x1d8/0x28c [mali]) from [<bf0153ac>] (mali_allocation_engine_allocate_memory+0x28/0x1c4 [mali])

[ 5279.905008@1] [<bf0153ac>] (mali_allocation_engine_allocate_memory+0x28/0x1c4 [mali]) from [<bf014994>] (_mali_ukk_attach_ump_mem+0x110/0x18c [mali])

[ 5279.918946@0] [<bf014994>] (_mali_ukk_attach_ump_mem+0x110/0x18c [mali]) from [<bf01d95c>] (mem_attach_ump_wrapper+0x64/0xc4 [mali])

[ 5279.929470@0] [<bf01d95c>] (mem_attach_ump_wrapper+0x64/0xc4 [mali]) from [<c00c0054>] (do_vfs_ioctl+0x80/0x568)

[ 5279.939907@1] [<c00c0054>] (do_vfs_ioctl+0x80/0x568) from [<c00c0574>] (sys_ioctl+0x38/0x60)

[ 5279.948483@1] [<c00c0574>] (sys_ioctl+0x38/0x60) from [<c000e980>] (ret_fast_syscall+0x0/0x30)

[ 5279.956147@1] Mem-info:

[ 5279.958527@1] Normal per-cpu:

[ 5279.961492@1] CPU    0: hi:   90, btch:  15 usd:  81

[ 5279.967181@1] CPU    1: hi:   90, btch:  15 usd:  45

[ 5279.971497@1] HighMem per-cpu:

[ 5279.974410@1] CPU    0: hi:  186, btch:  31 usd: 148

[ 5279.979623@1] CPU    1: hi:  186, btch:  31 usd:   0

[ 5279.988561@1] active_anon:52778 inactive_anon:168 isolated_anon:0

[ 5279.988569@1]  active_file:27000 inactive_file:47957 isolated_file:0

[ 5279.988574@1]  unevictable:55 dirty:27 writeback:0 unstable:0

[ 5279.988579@1]  free:32611 slab_reclaimable:3809 slab_unreclaimable:2656

[ 5279.988584@1]  mapped:13826 shmem:197 pagetables:1799 bounce:0

[ 5280.015615@1] Normal free:105176kB min:32768kB low:40960kB high:49152kB active_anon:25576kB inactive_anon:164kB active_file:25020kB inactive_file:108772kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:345096kB mlocked:0kB dirty:56kB writeback:0kB mapped:4064kB shmem:168kB slab_reclaimable:15200kB slab_unreclaimable:10608kB kernel_stack:5808kB pagetables:1104kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no

[ 5280.056902@1] lowmem_reserve[]: 0 4063 4063

[ 5280.059232@1] HighMem free:25276kB min:504kB low:12852kB high:25200kB active_anon:185496kB inactive_anon:508kB active_file:82936kB inactive_file:83016kB unevictable:220kB isolated(anon):0kB isolated(file):0kB present:520184kB mlocked:0kB dirty:52kB writeback:0kB mapped:51188kB shmem:620kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:6124kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no

[ 5280.099830@1] lowmem_reserve[]: 0 0 0

[ 5280.102180@1] Normal: 8715*4kB 4070*8kB 2262*16kB 17*32kB 7*64kB 2*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB 0*32768kB 0*65536kB 0*131072kB = 105116kB

[ 5280.117894@1] HighMem: 1367*4kB 450*8kB 133*16kB 34*32kB 1*64kB 3*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 1*4096kB 1*8192kB 0*16384kB 0*32768kB 0*65536kB 0*131072kB = 25276kB

[ 5280.133427@1] 75188 total pagecache pages

[ 5280.157163@1] 218368 pages of RAM

[ 5280.157197@1] 36511 free pages

[ 5280.157964@1] 4970 reserved pages

[ 5280.162271@1] 5385 slab pages

[ 5280.165461@1] 199245 pages shared

[ 5280.168621@1] 0 pages swap cached

[ 5280.902203@1] binder: 97:7892 ioctl c0844123 10f28 returned -22

[ 5282.140063@0] acl_tx

[ 5282.140104@0] date transfer occure in 6s

[ 5288.160039@0] acl_tx

[ 5288.160075@0] date transfer occure in 6s

[ 5289.564333@0] [dsp]dsp_open

[ 5289.564388@0] audiodsp prevent sleep

[ 5289.565760@0] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 5289.571043@0] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 5289.580232@0] [dsp]DSP heap start =0x99200000,size=0x100000

[ 5289.582305@0] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 5289.587996@0] reset dsp : dec opt=ffff, subid=0

[ 5289.592507@0] [dsp]dsp reset now

[ 5289.629006@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 5289.629030@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 5289.629041@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 5289.629053@0] [arc]register audioin capture  filter lib

[ 5289.629062@0] [arc]register audiout mixed  filter lib

[ 5289.629072@0] [arc]register audio resample  filter lib

[ 5289.629081@0] [arc]register tshd  filter lib

[ 5289.629089@0] [arc]register eq  filter lib

[ 5289.629097@0] [arc]alsa audio out sr 44100

[ 5289.629105@0] [arc]register helix aac lib

[ 5289.629113@0] [arc]have register a dsp codec before!!!

[ 5289.629123@0] [arc]System clock is 209333333

[ 5289.629131@0] [arc]

[ 5289.629137@0]

[ 5289.629142@0] decode a header frame to get the frame format

[ 5289.629152@0]

[ 5289.698790@0] [dsp][arc]actural aac audio sr 16000.ch num 1

[ 5289.698818@0] [arc]send audioinfo to mcpu,valid 0x1c

[ 5289.708571@0] [dsp]frame format changed,fmt->valid 0x1c

[ 5289.717688@0] [dsp]dsp status=52756e

[ 5289.717804@0] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 5289.727955@0] [dsp]audio info from header: sr 16000,ch 1

[ 5289.732852@0] [dsp]applied audio sr 16000,ch num 1

[ 5291.494948@1] binder: release 97:7888 transaction 322764 in, still active

[ 5291.496182@1] binder: send failed reply for transaction 322764 to 7339:7439

[ 5291.503393@1] adec_release

[ 5291.505840@1] [dsp]dsp_release

[ 5291.508851@1] audiodsp allow sleep

[ 5291.513820@1] binder: 7339:7439 transaction failed 29189, size 64-0

[ 5291.521118@1] binder: 7339:7351 transaction failed 29189, size 64-0

[ 5294.180029@0] no date transfer occure in 6s

[ 5300.200309@0] no date transfer occure in 6s

[ 5306.220080@0] no date transfer occure in 6s

[ 5312.240070@0] no date transfer occure in 6s

[ 5318.260052@0] no date transfer occure in 6s

[ 5324.280233@0] no date transfer occure in 6s

[ 5330.300041@0] no date transfer occure in 6s

[ 5336.320272@0] acl_tx

[ 5336.320477@0] date transfer occure in 6s

[ 5342.340262@0] acl_tx

[ 5342.340392@0] date transfer occure in 6s

[ 5348.360058@0] acl_tx

[ 5348.360087@0] date transfer occure in 6s

[ 5354.380245@0] acl_tx

[ 5354.380372@0] date transfer occure in 6s

[ 5360.400194@0] no date transfer occure in 6s

[ 5366.420040@0] no date transfer occure in 6s

[ 5372.440167@0] no date transfer occure in 6s

[ 5378.460068@0] no date transfer occure in 6s

[ 5384.480346@0] no date transfer occure in 6s

[ 5390.500204@0] no date transfer occure in 6s

[ 5396.520058@0] no date transfer occure in 6s

[ 5402.540213@0] no date transfer occure in 6s

[ 5408.560042@0] no date transfer occure in 6s

[ 5414.580309@0] no date transfer occure in 6s

[ 5420.600171@0] no date transfer occure in 6s

[ 5426.620064@0] no date transfer occure in 6s

[ 5432.640047@0] no date transfer occure in 6s

[ 5438.660041@0] no date transfer occure in 6s

[ 5444.680065@0] no date transfer occure in 6s

[ 5450.700053@0] no date transfer occure in 6s

[ 5456.720097@0] no date transfer occure in 6s

[ 5462.740216@0] no date transfer occure in 6s

[ 5468.760062@0] no date transfer occure in 6s

[ 5474.780164@0] no date transfer occure in 6s

[ 5480.800177@0] no date transfer occure in 6s

[ 5486.820163@0] no date transfer occure in 6s

[ 5492.840123@0] no date transfer occure in 6s

[ 5498.860067@0] no date transfer occure in 6s

[ 5504.880384@0] no date transfer occure in 6s

[ 5510.900044@0] no date transfer occure in 6s

[ 5516.920220@0] no date transfer occure in 6s

[ 5522.940165@0] no date transfer occure in 6s

[ 5528.960022@0] no date transfer occure in 6s

[ 5534.980048@0] no date transfer occure in 6s

[ 5541.000332@0] no date transfer occure in 6s

[ 5547.020044@0] no date transfer occure in 6s

[ 5553.040041@0] no date transfer occure in 6s

[ 5559.060059@0] no date transfer occure in 6s

[ 5565.080183@0] no date transfer occure in 6s

[ 5571.100063@0] no date transfer occure in 6s

[ 5577.120250@0] no date transfer occure in 6s

[ 5583.140170@0] no date transfer occure in 6s

[ 5589.160056@0] acl_tx

[ 5589.160083@0] date transfer occure in 6s

[ 5595.180037@0] acl_tx

[ 5595.180079@0] date transfer occure in 6s

[ 5601.200044@0] acl_tx

[ 5601.200091@0] date transfer occure in 6s

[ 5607.220044@0] acl_tx

[ 5607.220073@0] date transfer occure in 6s

[ 5613.240054@0] no date transfer occure in 6s

[ 5619.260017@0] no date transfer occure in 6s

[ 5625.280202@0] no date transfer occure in 6s

[ 5631.300052@0] no date transfer occure in 6s

[ 5637.320181@0] no date transfer occure in 6s

[ 5643.340048@0] no date transfer occure in 6s

[ 5649.360052@0] no date transfer occure in 6s

[ 5655.380039@0] no date transfer occure in 6s

[ 5661.400038@0] no date transfer occure in 6s

[ 5667.420059@0] no date transfer occure in 6s

[ 5673.440087@0] no date transfer occure in 6s

[ 5679.460054@0] no date transfer occure in 6s

[ 5685.480212@0] no date transfer occure in 6s

[ 5691.500055@0] no date transfer occure in 6s

[ 5697.520178@0] no date transfer occure in 6s

[ 5703.540228@0] no date transfer occure in 6s

[ 5709.560041@0] no date transfer occure in 6s

[ 5715.580170@0] no date transfer occure in 6s

[ 5721.600066@0] no date transfer occure in 6s

[ 5727.620263@0] no date transfer occure in 6s

[ 5733.640252@0] no date transfer occure in 6s

[ 5739.660192@0] no date transfer occure in 6s

[ 5745.680186@0] no date transfer occure in 6s

[ 5751.700041@0] no date transfer occure in 6s

[ 5757.720217@0] no date transfer occure in 6s

[ 5763.740237@0] no date transfer occure in 6s

[ 5769.760219@0] no date transfer occure in 6s

[ 5775.780041@0] no date transfer occure in 6s

[ 5781.800170@0] no date transfer occure in 6s

[ 5787.820231@0] no date transfer occure in 6s

[ 5793.840360@0] no date transfer occure in 6s

[ 5799.860248@0] no date transfer occure in 6s

[ 5805.880047@0] no date transfer occure in 6s

[ 5811.900175@0] no date transfer occure in 6s

[ 5817.920176@0] no date transfer occure in 6s

[ 5823.940039@0] no date transfer occure in 6s

[ 5829.960262@0] no date transfer occure in 6s

[ 5835.980053@0] no date transfer occure in 6s

[ 5842.000208@0] no date transfer occure in 6s

[ 5848.020176@0] no date transfer occure in 6s

[ 5854.040224@0] no date transfer occure in 6s

[ 5860.060182@0] no date transfer occure in 6s

[ 5866.080056@0] no date transfer occure in 6s

[ 5872.100046@0] no date transfer occure in 6s

[ 5878.120227@0] no date transfer occure in 6s

[ 5884.140061@0] no date transfer occure in 6s

[ 5890.160229@0] no date transfer occure in 6s

[ 5896.180143@0] no date transfer occure in 6s

[ 5902.200183@0] no date transfer occure in 6s

[ 5908.220209@0] no date transfer occure in 6s

[ 5914.240380@0] no date transfer occure in 6s

[ 5920.260349@0] no date transfer occure in 6s

[ 5926.280069@0] acl_tx

[ 5926.280119@0] date transfer occure in 6s

[ 5932.300113@0] acl_tx

[ 5932.300150@0] date transfer occure in 6s

[ 5938.320092@0] acl_tx

[ 5938.320118@0] date transfer occure in 6s

[ 5944.340143@0] acl_tx

[ 5944.340210@0] date transfer occure in 6s

[ 5950.360065@0] acl_tx

[ 5950.360100@0] date transfer occure in 6s

[ 5954.917055@0] wl_iw_set_suspend: Suspend Flag 0 -> 1

[ 5955.389611@1] amlogic camera driver: gt2005_v4l2_init.

[ 5955.470217@0] +++found a init function, and run it..

[ 5955.485332@1] [dsp]dsp_open

[ 5955.485379@1] audiodsp prevent sleep

[ 5955.486524@0] [dsp][arc]audio dsp halted now,ES rd offset 9232,decoded pcm bytes 32704,51pcm bytes 0

[ 5955.500903@1] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 5955.501022@1] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 5955.518257@1] [dsp]DSP heap start =0x99200000,size=0x100000

[ 5955.518453@1] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 5955.537103@1] reset dsp : dec opt=ffff, subid=0

[ 5955.537139@1] [dsp]dsp reset now

[ 5955.560592@1] GT2005_write_regs success in initial GT2005.

[ 5955.570637@1] [dsp]dsp status=52756e

[ 5955.570696@1] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 5955.572315@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 5955.572324@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 5955.572329@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 5955.572336@0] [arc]register audioin capture  filter lib

[ 5955.572340@0] [arc]register audiout mixed  filter lib

[ 5955.572345@0] [arc]register audio resample  filter lib

[ 5955.572350@0] [arc]register tshd  filter lib

[ 5955.572354@0] [arc]register eq  filter lib

[ 5955.572358@0] [arc]alsa audio out sr 44100

[ 5955.572362@0] [arc]register helix aac lib

[ 5955.572366@0] [arc]have register a dsp codec before!!!

[ 5955.572370@0] [arc]System clock is 209333333

[ 5955.572374@0] [arc]

[ 5955.572377@0]

[ 5955.572380@0] decode a header frame to get the frame format

[ 5955.572385@0]

[ 5955.574770@0] [dsp]frame format changed,fmt->valid 0x1c

[ 5955.575204@0] [dsp][arc]actural aac audio sr 16000.ch num 1

[ 5955.575209@0] [arc]send audioinfo to mcpu,valid 0x1c

[ 5955.672991@1] [dsp]audio info from header: sr 16000,ch 1

[ 5955.674314@1] [dsp]applied audio sr 16000,ch num 1

[ 5955.682078@1] audio pts started::::::: 0

[ 5955.684406@1] audio pts started::::::: 1

[ 5955.720057@0] +++found a uninit function, and run it..

[ 5955.890101@1] gc0308_init OK!!!!

[ 5955.890183@1] +++found a init function, and run it..

[ 5955.948463@1] GC0308_write_regs success in initial GC0308.

[ 5955.948716@1] GC0308_write_custom_regs success in initial GC0308.

[ 5956.072346@1] amlogic camera driver: gc0308_v4l2_uninit.

[ 5956.090442@1] +++found a uninit function, and run it..

[ 5956.380121@0] acl_tx

[ 5956.380184@0] date transfer occure in 6s

[ 5956.937366@0] [dsp][arc]audio dsp halted now,ES rd offset 15748,decoded pcm bytes 88416,51pcm bytes 0

[ 5956.950289@0] [dsp]dsp_release

[ 5956.950360@0] audiodsp allow sleep

[ 5956.951735@1] adec_release

[ 5956.958041@0] [dsp]dsp_open

[ 5956.958113@0] audiodsp prevent sleep

[ 5956.962847@0] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 5956.965999@0] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 5956.995997@1] [dsp]DSP heap start =0x99200000,size=0x100000

[ 5956.996444@1] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 5957.006010@0] reset dsp : dec opt=ffff, subid=0

[ 5957.006467@0] [dsp]dsp reset now

[ 5957.042923@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 5957.042949@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 5957.042959@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 5957.042971@0] [arc]register audioin capture  filter lib

[ 5957.042980@0] [arc]register audiout mixed  filter lib

[ 5957.042988@0] [arc]register audio resample  filter lib

[ 5957.042997@0] [arc]register tshd  filter lib

[ 5957.043005@0] [arc]register eq  filter lib

[ 5957.043012@0] [arc]alsa audio out sr 44100

[ 5957.043020@0] [arc]register helix aac lib

[ 5957.043027@0] [arc]have register a dsp codec before!!!

[ 5957.043036@0] [arc]System clock is 209333333

[ 5957.043044@0] [arc]

[ 5957.043049@0]

[ 5957.043055@0] decode a header frame to get the frame format

[ 5957.043064@0]

[ 5957.047486@1] [dsp]dsp status=52756e

[ 5957.047543@1] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 5957.047565@1] [dsp]audio info from header: sr 16000,ch 1

[ 5957.047580@1] [dsp]applied audio sr 16000,ch num 1

[ 5957.267244@1] audio pts started::::::: 0

[ 5957.570856@1] audio pts started::::::: 1

[ 5957.654017@0] [dsp][arc]audio dsp halted now,ES rd offset 0,decoded pcm bytes 0,51pcm bytes 0

[ 5957.670228@1] [dsp]dsp_release

[ 5957.670293@1] audiodsp allow sleep

[ 5957.673310@1] adec_release

[ 5957.675858@0] [dsp]dsp_open

[ 5957.676618@0] audiodsp prevent sleep

[ 5957.683149@0] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 5957.685902@0] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 5957.715779@1] [dsp]DSP heap start =0x99200000,size=0x100000

[ 5957.716223@1] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 5957.722082@1] reset dsp : dec opt=ffff, subid=0

[ 5957.726669@1] [dsp]dsp reset now

[ 5957.758527@1] [dsp]dsp status=52756e

[ 5957.758682@1] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 5957.763695@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 5957.763725@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 5957.763739@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 5957.763753@0] [arc]register audioin capture  filter lib

[ 5957.763765@0] [arc]register audiout mixed  filter lib

[ 5957.763776@0] [arc]register audio resample  filter lib

[ 5957.763786@0] [arc]register tshd  filter lib

[ 5957.763797@0] [arc]register eq  filter lib

[ 5957.763806@0] [arc]alsa audio out sr 44100

[ 5957.763816@0] [arc]register helix aac lib

[ 5957.763825@0] [arc]have register a dsp codec before!!!

[ 5957.763836@0] [arc]System clock is 209333333

[ 5957.763846@0] [arc]

[ 5957.763853@0]

[ 5957.763859@0] decode a header frame to get the frame format

[ 5957.763870@0]

[ 5957.881436@0] [dsp]audio info from header: sr 16000,ch 1

[ 5957.881555@0] [dsp]applied audio sr 16000,ch num 1

[ 5957.889348@0] audio pts started::::::: 0

[ 5957.891338@0] audio pts started::::::: 1

[ 5957.954060@0] [dsp][arc]audio dsp halted now,ES rd offset 0,decoded pcm bytes 0,51pcm bytes 0

[ 5957.971584@0] [dsp]dsp_release

[ 5957.971762@0] audiodsp allow sleep

[ 5957.973492@0] adec_release

[ 5957.999855@0] [dsp]dsp_open

[ 5957.999941@0] audiodsp prevent sleep

[ 5958.002704@0] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 5958.006531@0] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 5958.028842@0] [dsp]DSP heap start =0x99200000,size=0x100000

[ 5958.029314@0] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 5958.038858@0] reset dsp : dec opt=ffff, subid=0

[ 5958.039350@0] [dsp]dsp reset now

[ 5958.077096@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 5958.077133@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 5958.077145@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 5958.077159@0] [arc]register audioin capture  filter lib

[ 5958.077169@0] [arc]register audiout mixed  filter lib

[ 5958.077180@0] [arc]register audio resample  filter lib

[ 5958.077190@0] [arc]register tshd  filter lib

[ 5958.077200@0] [arc]register eq  filter lib

[ 5958.077209@0] [arc]alsa audio out sr 44100

[ 5958.077219@0] [arc]register helix aac lib

[ 5958.077228@0] [arc]have register a dsp codec before!!!

[ 5958.077238@0] [arc]System clock is 209333333

[ 5958.077248@0] [arc]

[ 5958.077255@0]

[ 5958.077261@0] decode a header frame to get the frame format

[ 5958.077272@0]

[ 5958.151380@0] [dsp]dsp status=52756e

[ 5958.151438@0] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 5958.160352@0] [dsp]audio info from header: sr 16000,ch 1

[ 5958.160539@0] [dsp]applied audio sr 16000,ch num 1

[ 5958.267265@1] audio pts started::::::: 0

[ 5958.268722@1] audio pts started::::::: 1

[ 5958.289853@1] wl_iw_set_suspend: Suspend Flag 1 -> 0

[ 5958.495617@0] [dsp][arc]audio dsp halted now,ES rd offset 0,decoded pcm bytes 0,51pcm bytes 0

[ 5958.510114@1] [dsp]dsp_release

[ 5958.510165@1] audiodsp allow sleep

[ 5958.511041@0] wl_iw_set_suspend: Suspend Flag 0 -> 1

[ 5958.516074@0] adec_release

[ 5958.519332@1] [dsp]dsp_open

[ 5958.521814@1] audiodsp prevent sleep

[ 5958.525452@1] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 5958.530763@1] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 5958.544706@1] [dsp]DSP heap start =0x99200000,size=0x100000

[ 5958.544838@1] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 5958.556097@0] reset dsp : dec opt=ffff, subid=0

[ 5958.556134@0] [dsp]dsp reset now

[ 5958.590224@0] [dsp]dsp status=52756e

[ 5958.590250@0] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 5958.590257@0] [dsp]audio info from header: sr 16000,ch 1

[ 5958.590262@0] [dsp]applied audio sr 16000,ch num 1

[ 5958.590795@0] audio pts started::::::: 0

[ 5958.592130@0] audio pts started::::::: 1

[ 5958.618341@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 5958.618351@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 5958.618354@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 5958.618357@0] [arc]register audioin capture  filter lib

[ 5958.618360@0] [arc]register audiout mixed  filter lib

[ 5958.618363@0] [arc]register audio resample  filter lib

[ 5958.618366@0] [arc]register tshd  filter lib

[ 5958.618368@0] [arc]register eq  filter lib

[ 5958.618370@0] [arc]alsa audio out sr 44100

[ 5958.618373@0] [arc]register helix aac lib

[ 5958.618375@0] [arc]have register a dsp codec before!!!

[ 5958.618378@0] [arc]System clock is 209333333

[ 5958.618380@0] [arc]

[ 5958.618382@0]

[ 5958.618384@0] decode a header frame to get the frame format

[ 5958.618387@0]

[ 5958.711977@0] [dsp][arc]audio dsp halted now,ES rd offset 0,decoded pcm bytes 0,51pcm bytes 0

[ 5958.730183@0] [dsp]dsp_release

[ 5958.730258@0] audiodsp allow sleep

[ 5958.731476@0] adec_release

[ 5962.400054@0] acl_tx

[ 5962.400121@0] date transfer occure in 6s

[ 5968.420102@0] no date transfer occure in 6s

[ 5974.440048@0] no date transfer occure in 6s

[ 5980.460108@0] no date transfer occure in 6s

[ 5986.480081@0] no date transfer occure in 6s

[ 5992.500104@0] no date transfer occure in 6s

[ 5995.511690@1] wl_iw_set_suspend: Suspend Flag 1 -> 0

[ 5996.269235@1] [dsp]dsp_open

[ 5996.269273@1] audiodsp prevent sleep

[ 5996.270828@1] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 5996.275753@1] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 5996.285174@0] [dsp]DSP heap start =0x99200000,size=0x100000

[ 5996.287077@0] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 5996.293007@0] reset dsp : dec opt=ffff, subid=0

[ 5996.297405@0] [dsp]dsp reset now

[ 5996.333713@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 5996.333720@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 5996.333723@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 5996.333727@0] [arc]register audioin capture  filter lib

[ 5996.333730@0] [arc]register audiout mixed  filter lib

[ 5996.333732@0] [arc]register audio resample  filter lib

[ 5996.333735@0] [arc]register tshd  filter lib

[ 5996.333737@0] [arc]register eq  filter lib

[ 5996.333740@0] [arc]alsa audio out sr 44100

[ 5996.333742@0] [arc]register helix aac lib

[ 5996.333745@0] [arc]have register a dsp codec before!!!

[ 5996.333747@0] [arc]System clock is 209333333

[ 5996.333750@0] [arc]

[ 5996.333752@0]

[ 5996.333753@0] decode a header frame to get the frame format

[ 5996.333756@0]

[ 5996.403147@0] [dsp][arc]actural aac audio sr 16000.ch num 1

[ 5996.403155@0] [arc]send audioinfo to mcpu,valid 0x1c

[ 5996.413061@0] [dsp]frame format changed,fmt->valid 0x1c

[ 5996.419136@0] [dsp]dsp status=52756e

[ 5996.422357@0] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 5996.432128@0] [dsp]audio info from header: sr 16000,ch 1

[ 5996.437338@0] [dsp]applied audio sr 16000,ch num 1

[ 5996.442863@0] audio pts started::::::: 0

[ 5996.447204@0] audio pts started::::::: 1

[ 5998.520228@0] acl_tx

[ 5998.520419@0] date transfer occure in 6s

[ 5998.995424@0] [dsp][arc]audio dsp halted now,ES rd offset 15246,decoded pcm bytes 120000,51pcm bytes 0

[ 5999.010347@1] [dsp]dsp_release

[ 5999.010561@1] audiodsp allow sleep

[ 5999.012860@1] adec_release

[ 6004.540148@0] acl_tx

[ 6004.540262@0] date transfer occure in 6s

[ 6004.921355@0] SRP: Device mode

[ 6005.030572@0] USB RESET

[ 6005.189763@0] android_work: sent uevent USB_STATE=CONNECTED

[ 6005.192352@0] USB RESET

[ 6005.376741@0] android_usb gadget: high speed config #1: android

[ 6005.379290@0] adjust_gadget_wake_lock lock

[ 6005.409336@0] android_work: sent uevent USB_STATE=CONFIGURED

[ 6010.560036@0] acl_tx

[ 6010.560076@0] date transfer occure in 6s

[ 6016.580049@0] acl_tx

[ 6016.580080@0] date transfer occure in 6s

[ 6022.600166@0] no date transfer occure in 6s

[ 6028.620300@0] no date transfer occure in 6s

[ 6034.640310@0] no date transfer occure in 6s

[ 6040.660050@0] no date transfer occure in 6s

[ 6046.680061@0] no date transfer occure in 6s

[ 6052.700093@0] acl_tx

[ 6052.700136@0] date transfer occure in 6s

[ 6054.506930@1] wl_iw_set_suspend: Suspend Flag 0 -> 1

[ 6055.032877@1] [dsp]dsp_open

[ 6055.032918@1] audiodsp prevent sleep

[ 6055.034341@1] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 6055.039561@1] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 6055.052571@1] [dsp]DSP heap start =0x99200000,size=0x100000

[ 6055.052679@1] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 6055.058795@1] reset dsp : dec opt=ffff, subid=0

[ 6055.064781@1] [dsp]dsp reset now

[ 6055.105721@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 6055.105735@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 6055.105739@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 6055.105743@0] [arc]register audioin capture  filter lib

[ 6055.105746@0] [arc]register audiout mixed  filter lib

[ 6055.105749@0] [arc]register audio resample  filter lib

[ 6055.105752@0] [arc]register tshd  filter lib

[ 6055.105754@0] [arc]register eq  filter lib

[ 6055.105757@0] [arc]alsa audio out sr 44100

[ 6055.105759@0] [arc]register helix aac lib

[ 6055.105762@0] [arc]have register a dsp codec before!!!

[ 6055.105765@0] [arc]System clock is 209333333

[ 6055.105767@0] [arc]

[ 6055.105769@0]

[ 6055.105771@0] decode a header frame to get the frame format

[ 6055.105774@0]

[ 6055.175209@0] [dsp][arc]actural aac audio sr 16000.ch num 1

[ 6055.175217@0] [arc]send audioinfo to mcpu,valid 0x1c

[ 6055.180100@1] [dsp]dsp status=52756e

[ 6055.180125@1] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 6055.180133@1] [dsp]audio info from header: sr 16000,ch 1

[ 6055.180138@1] [dsp]applied audio sr 16000,ch num 1

[ 6055.180808@1] audio pts started::::::: 0

[ 6055.182222@1] audio pts started::::::: 1

[ 6055.185101@0] [dsp]frame format changed,fmt->valid 0x1c

[ 6056.269405@0] [dsp][arc]audio dsp halted now,ES rd offset 15748,decoded pcm bytes 80992,51pcm bytes 0

[ 6056.280320@0] [dsp]dsp_release

[ 6056.280406@0] audiodsp allow sleep

[ 6056.281978@0] adec_release

[ 6056.292728@0] [dsp]dsp_open

[ 6056.292819@0] audiodsp prevent sleep

[ 6056.298460@0] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 6056.299227@0] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 6056.331131@0] [dsp]DSP heap start =0x99200000,size=0x100000

[ 6056.332412@0] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 6056.337385@0] reset dsp : dec opt=ffff, subid=0

[ 6056.342097@0] [dsp]dsp reset now

[ 6056.389944@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 6056.389976@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 6056.389989@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 6056.390003@0] [arc]register audioin capture  filter lib

[ 6056.390015@0] [arc]register audiout mixed  filter lib

[ 6056.390026@0] [arc]register audio resample  filter lib

[ 6056.390037@0] [arc]register tshd  filter lib

[ 6056.390047@0] [arc]register eq  filter lib

[ 6056.390054@0] [arc]alsa audio out sr 44100

[ 6056.390054@0] [arc]register helix aac lib

[ 6056.390054@0] [arc]have register a dsp codec before!!!

[ 6056.390054@0] [arc]System clock is 209333333

[ 6056.390054@0] [arc]

[ 6056.390054@0]

[ 6056.390054@0] decode a header frame to get the frame format

[ 6056.390054@0]

[ 6056.464603@0] [dsp]dsp status=52756e

[ 6056.464662@0] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 6056.482634@0] [dsp]audio info from header: sr 16000,ch 1

[ 6056.482761@0] [dsp]applied audio sr 16000,ch num 1

[ 6056.488195@0] audio pts started::::::: 0

[ 6056.496640@1] audio pts started::::::: 1

[ 6056.564034@1] wl_iw_set_suspend: Suspend Flag 1 -> 0

[ 6056.567759@0] [dsp][arc]audio dsp halted now,ES rd offset 0,decoded pcm bytes 0,51pcm bytes 0

[ 6056.580181@1] [dsp]dsp_release

[ 6056.580219@1] audiodsp allow sleep

[ 6056.582160@1] adec_release

[ 6056.609246@1] binder: release 7937:8487 transaction 340605 in, still active

[ 6056.610917@1] binder: send failed reply for transaction 340605 to 182:449

[ 6056.616600@0] adec_release

[ 6056.625156@1] binder: 7339:7351 transaction failed 29189, size 64-0

[ 6057.105859@1] binder: 7339:8585 transaction failed 29189, size 64-0

[ 6057.521036@0] binder: 7339:8577 transaction failed 29189, size 60-0

[ 6057.809529@1] wl_iw_set_suspend: Suspend Flag 0 -> 1

[ 6058.720049@0] acl_tx

[ 6058.720068@0] date transfer occure in 6s

[ 6059.022182@1] amlogic camera driver: gt2005_v4l2_init.

[ 6059.110136@1] +++found a init function, and run it..

[ 6059.176912@1] GT2005_write_regs success in initial GT2005.

[ 6059.261717@1] +++found a uninit function, and run it..

[ 6059.430136@0] gc0308_init OK!!!!

[ 6059.430259@0] +++found a init function, and run it..

[ 6059.495940@1] GC0308_write_regs success in initial GC0308.

[ 6059.496156@1] GC0308_write_custom_regs success in initial GC0308.

[ 6059.616088@0] amlogic camera driver: gc0308_v4l2_uninit.

[ 6059.630330@0] +++found a uninit function, and run it..

[ 6064.613388@1] wl_iw_set_suspend: Suspend Flag 1 -> 0

[ 6064.740114@0] acl_tx

[ 6064.740177@0] date transfer occure in 6s

[ 6065.403753@1] [dsp]dsp_open

[ 6065.403786@1] audiodsp prevent sleep

[ 6065.405138@1] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 6065.414017@1] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 6065.422236@1] [dsp]DSP heap start =0x99200000,size=0x100000

[ 6065.422418@1] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 6065.432986@1] reset dsp : dec opt=ffff, subid=0

[ 6065.433019@1] [dsp]dsp reset now

[ 6065.479665@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 6065.479682@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 6065.479686@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 6065.479690@0] [arc]register audioin capture  filter lib

[ 6065.479693@0] [arc]register audiout mixed  filter lib

[ 6065.479696@0] [arc]register audio resample  filter lib

[ 6065.479699@0] [arc]register tshd  filter lib

[ 6065.479702@0] [arc]register eq  filter lib

[ 6065.479704@0] [arc]alsa audio out sr 44100

[ 6065.479706@0] [arc]register helix aac lib

[ 6065.479709@0] [arc]have register a dsp codec before!!!

[ 6065.479712@0] [arc]System clock is 209333333

[ 6065.480356@0] [dsp][arc]

[ 6065.480360@0]

[ 6065.480362@0] decode a header frame to get the frame format

[ 6065.480365@0]

[ 6065.550955@0] [dsp][arc]send audioinfo to mcpu,valid 0x1c

[ 6065.550971@0] [dsp]frame format changed,fmt->valid 0x1c

[ 6065.560696@1] [dsp]dsp status=52756e

[ 6065.560729@1] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 6065.560736@1] [dsp]audio info from header: sr 16000,ch 1

[ 6065.560742@1] [dsp]applied audio sr 16000,ch num 1

[ 6065.561378@1] audio pts started::::::: 0

[ 6065.562631@1] audio pts started::::::: 1

[ 6068.376291@0] [dsp][arc]audio dsp halted now,ES rd offset 15246,decoded pcm bytes 120000,51pcm bytes 0

[ 6068.390065@1] [dsp]dsp_release

[ 6068.390085@1] audiodsp allow sleep

[ 6068.391117@1] adec_release

[ 6070.760228@0] acl_tx

[ 6070.760388@0] date transfer occure in 6s

[ 6076.780040@0] acl_tx

[ 6076.780069@0] date transfer occure in 6s

[ 6082.800259@0] no date transfer occure in 6s

[ 6088.820250@0] no date transfer occure in 6s

[ 6094.840216@0] no date transfer occure in 6s

[ 6100.860022@0] no date transfer occure in 6s

[ 6106.880201@0] no date transfer occure in 6s

[ 6112.900064@0] no date transfer occure in 6s

[ 6118.920048@0] no date transfer occure in 6s

[ 6124.940038@0] no date transfer occure in 6s

[ 6125.868410@0] wl_iw_set_suspend: Suspend Flag 0 -> 1

[ 6126.210263@1] wl_iw_set_suspend: Suspend Flag 1 -> 0

[ 6126.265568@0] wl_iw_set_suspend: Suspend Flag 0 -> 1

[ 6128.211907@1] wl_iw_set_suspend: Suspend Flag 1 -> 0

[ 6128.598948@0] [dsp]dsp_open

[ 6128.598962@0] audiodsp prevent sleep

[ 6128.602191@0] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 6128.607355@1] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 6128.632870@0] [dsp]DSP heap start =0x99200000,size=0x100000

[ 6128.633352@0] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 6128.639154@0] reset dsp : dec opt=ffff, subid=0

[ 6128.644170@0] [dsp]dsp reset now

[ 6128.686807@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 6128.686821@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 6128.686826@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 6128.686831@0] [arc]register audioin capture  filter lib

[ 6128.686836@0] [arc]register audiout mixed  filter lib

[ 6128.686840@0] [arc]register audio resample  filter lib

[ 6128.686844@0] [arc]register tshd  filter lib

[ 6128.686848@0] [arc]register eq  filter lib

[ 6128.686852@0] [arc]alsa audio out sr 44100

[ 6128.686856@0] [arc]register helix aac lib

[ 6128.686859@0] [arc]have register a dsp codec before!!!

[ 6128.686864@0] [arc]System clock is 209333333

[ 6128.745365@0] [dsp][arc]actural aac audio sr 16000.ch num 1

[ 6128.745373@0] [arc]send audioinfo to mcpu,valid 0x1c

[ 6128.755252@0] [dsp]frame format changed,fmt->valid 0x1c

[ 6128.761400@0] [dsp]dsp status=52756e

[ 6128.764556@0] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 6128.774974@0] [dsp]audio info from header: sr 16000,ch 1

[ 6128.774987@0] [dsp]applied audio sr 16000,ch num 1

[ 6128.777424@0] audio pts started::::::: 0

[ 6128.778910@0] audio pts started::::::: 1

[ 6130.960053@0] acl_tx

[ 6130.960071@0] date transfer occure in 6s

[ 6131.289160@0] [dsp][arc]audio dsp halted now,ES rd offset 15246,decoded pcm bytes 120000,51pcm bytes 0

[ 6131.300223@0] [dsp]dsp_release

[ 6131.300321@0] audiodsp allow sleep

[ 6131.302080@1] adec_release

[ 6132.374811@1] wl_iw_set_suspend: Suspend Flag 0 -> 1

[ 6132.888974@0] [dsp]dsp_open

[ 6132.889013@0] audiodsp prevent sleep

[ 6132.890951@0] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 6132.899497@0] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 6132.907496@0] [dsp]DSP heap start =0x99200000,size=0x100000

[ 6132.907801@0] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 6132.919712@0] reset dsp : dec opt=ffff, subid=0

[ 6132.919763@0] [dsp]dsp reset now

[ 6132.959741@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 6132.959749@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 6132.959752@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 6132.959756@0] [arc]register audioin capture  filter lib

[ 6132.959759@0] [arc]register audiout mixed  filter lib

[ 6132.959762@0] [arc]register audio resample  filter lib

[ 6132.959765@0] [arc]register tshd  filter lib

[ 6132.959768@0] [arc]register eq  filter lib

[ 6132.959770@0] [arc]alsa audio out sr 44100

[ 6132.959773@0] [arc]register helix aac lib

[ 6132.959775@0] [arc]have register a dsp codec before!!!

[ 6132.959778@0] [arc]System clock is 209333333

[ 6132.959781@0] [arc]

[ 6132.959783@0]

[ 6132.959785@0] decode a header frame to get the frame format

[ 6132.959788@0]

[ 6132.960102@1] [dsp]dsp status=52756e

[ 6132.960135@1] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 6132.960143@1] [dsp]audio info from header: sr 16000,ch 1

[ 6132.960148@1] [dsp]applied audio sr 16000,ch num 1

[ 6132.960920@1] audio pts started::::::: 0

[ 6132.962141@1] audio pts started::::::: 1

[ 6133.053239@0] [dsp][arc]actural aac audio sr 16000.ch num 1

[ 6133.053246@0] [arc]send audioinfo to mcpu,valid 0x1c

[ 6133.053261@0] [dsp]frame format changed,fmt->valid 0x1c

[ 6134.105367@0] [dsp][arc]audio dsp halted now,ES rd offset 15748,decoded pcm bytes 84704,51pcm bytes 0

[ 6134.120275@0] [dsp]dsp_release

[ 6134.120421@0] audiodsp allow sleep

[ 6134.121754@1] adec_release

[ 6134.125295@0] [dsp]dsp_open

[ 6134.129164@0] audiodsp prevent sleep

[ 6134.137074@0] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 6134.137215@0] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 6134.156034@0] [dsp]DSP heap start =0x99200000,size=0x100000

[ 6134.156346@0] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 6134.162283@0] reset dsp : dec opt=ffff, subid=0

[ 6134.166595@0] [dsp]dsp reset now

[ 6134.204007@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 6134.204033@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 6134.204044@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 6134.204055@0] [arc]register audioin capture  filter lib

[ 6134.204064@0] [arc]register audiout mixed  filter lib

[ 6134.204073@0] [arc]register audio resample  filter lib

[ 6134.204082@0] [arc]register tshd  filter lib

[ 6134.204090@0] [arc]register eq  filter lib

[ 6134.204097@0] [arc]alsa audio out sr 44100

[ 6134.204105@0] [arc]register helix aac lib

[ 6134.204113@0] [arc]have register a dsp codec before!!!

[ 6134.204121@0] [arc]System clock is 209333333

[ 6134.204129@0] [arc]

[ 6134.204135@0]

[ 6134.204140@0] decode a header frame to get the frame format

[ 6134.204149@0]

[ 6134.275902@0] [dsp]dsp status=52756e

[ 6134.277091@0] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 6134.288895@0] [dsp]audio info from header: sr 16000,ch 1

[ 6134.312921@0] [dsp]applied audio sr 16000,ch num 1

[ 6134.315751@0] audio pts started::::::: 0

[ 6134.318036@1] audio pts started::::::: 1

[ 6134.365874@0] wl_iw_set_suspend: Suspend Flag 1 -> 0

[ 6134.385309@0] [dsp][arc]audio dsp halted now,ES rd offset 0,decoded pcm bytes 0,51pcm bytes 0

[ 6134.400172@1] [dsp]dsp_release

[ 6134.400234@1] audiodsp allow sleep

[ 6134.401538@1] adec_release

[ 6134.419596@1] [dsp]dsp_open

[ 6134.419634@1] audiodsp prevent sleep

[ 6134.421049@1] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 6134.426219@1] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 6134.439784@1] [dsp]DSP heap start =0x99200000,size=0x100000

[ 6134.439896@1] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 6134.446097@1] reset dsp : dec opt=ffff, subid=0

[ 6134.451394@1] [dsp]dsp reset now

[ 6134.486467@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 6134.486477@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 6134.486480@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 6134.486484@0] [arc]register audioin capture  filter lib

[ 6134.486487@0] [arc]register audiout mixed  filter lib

[ 6134.486489@0] [arc]register audio resample  filter lib

[ 6134.486492@0] [arc]register tshd  filter lib

[ 6134.486494@0] [arc]register eq  filter lib

[ 6134.486497@0] [arc]alsa audio out sr 44100

[ 6134.486499@0] [arc]register helix aac lib

[ 6134.486502@0] [arc]have register a dsp codec before!!!

[ 6134.486504@0] [arc]System clock is 209333333

[ 6134.486507@0] [arc]

[ 6134.486508@0]

[ 6134.486510@0] decode a header frame to get the frame format

[ 6134.486513@0]

[ 6134.560072@0] [dsp]dsp status=52756e

[ 6134.560153@0] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 6134.570641@0] [dsp]audio info from header: sr 16000,ch 1

[ 6134.575330@0] [dsp]applied audio sr 16000,ch num 1

[ 6134.581218@0] audio pts started::::::: 0

[ 6134.584608@0] audio pts started::::::: 1

[ 6134.613668@1] wl_iw_set_suspend: Suspend Flag 0 -> 1

[ 6134.731142@0] [dsp][arc]audio dsp halted now,ES rd offset 0,decoded pcm bytes 0,51pcm bytes 0

[ 6134.750078@0] [dsp]dsp_release

[ 6134.750115@0] audiodsp allow sleep

[ 6134.751707@1] adec_release

[ 6134.755065@1] adec_release

[ 6136.980047@0] acl_tx

[ 6136.980074@0] date transfer occure in 6s

[ 6139.654698@0] wl_iw_set_suspend: Suspend Flag 1 -> 0

[ 6140.363707@1] [dsp]dsp_open

[ 6140.363750@1] audiodsp prevent sleep

[ 6140.365016@1] [dsp]DSP statck start =0x82c30000,size=0x10000

[ 6140.372603@0] [dsp]DSP gp statck start =0x901fc600,size=0x200

[ 6140.382090@0] [dsp]DSP heap start =0x99200000,size=0x100000

[ 6140.382284@0] [dsp]DSP stream buffer to [0x83ff0000-0x83ff7fe0]

[ 6140.388823@0] reset dsp : dec opt=ffff, subid=0

[ 6140.393083@0] [dsp]dsp reset now

[ 6140.428510@0] [dsp][arc]DSP version=commit-23f9473 build:2012-07-04 17:30:32,dsp clock 209333333

[ 6140.428521@0] [arc]memstart=99200000,memend=ff000,size=1048544

[ 6140.428524@0] [arc]init memory pool,size=1045320,toltal size=1045320,used size=3224

[ 6140.428528@0] [arc]register audioin capture  filter lib

[ 6140.428531@0] [arc]register audiout mixed  filter lib

[ 6140.428533@0] [arc]register audio resample  filter lib

[ 6140.428536@0] [arc]register tshd  filter lib

[ 6140.428539@0] [arc]register eq  filter lib

[ 6140.428541@0] [arc]alsa audio out sr 44100

[ 6140.428543@0] [arc]register helix aac lib

[ 6140.428546@0] [arc]have register a dsp codec before!!!

[ 6140.428548@0] [arc]System clock is 209333333

[ 6140.428551@0] [arc]

[ 6140.428553@0]

[ 6140.428554@0] decode a header frame to get the frame format

[ 6140.428557@0]

[ 6140.497968@0] [dsp][arc]actural aac audio sr 16000.ch num 1

[ 6140.497976@0] [arc]send audioinfo to mcpu,valid 0x1c

[ 6140.507872@0] [dsp]frame format changed,fmt->valid 0x1c

[ 6140.513948@0] [dsp]dsp status=52756e

[ 6140.517180@0] [dsp]we DO NOT got format details from dsp,so use the info got from the header parsed instead

[ 6140.527652@0] [dsp]audio info from header: sr 16000,ch 1

[ 6140.532207@0] [dsp]applied audio sr 16000,ch num 1

[ 6140.538872@0] audio pts started::::::: 0

[ 6140.542824@0] audio pts started::::::: 1

[ 6143.000329@0] acl_tx

[ 6143.000487@0] date transfer occure in 6s

[ 6143.478522@0] [dsp][arc]audio dsp halted now,ES rd offset 15246,decoded pcm bytes 120000,51pcm bytes 0

[ 6143.490602@0] [dsp]dsp_release

[ 6143.490842@0] audiodsp allow sleep

[ 6143.493603@0] adec_release