Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- FFADO diagnostic utility 2.3.0
- ============================
- (C) 2008 Pieter Palmers
- 2009-2010 Arnold Krille
- === CHECK ===
- Base system...
- kernel version............ 4.8.0-27-generic
- Preempt (low latency)... False
- RT patched.............. False
- old 1394 stack present.... False
- old 1394 stack loaded..... False
- old 1394 stack active..... False
- new 1394 stack present.... True
- new 1394 stack loaded..... True
- new 1394 stack active..... True
- /dev/raw1394 node present. False
- /dev/fw* permissions:
- crw------- 1 root root 246, 0 Nov 27 12:14 /dev/fw0
- crw-rw----+ 1 root audio 246, 1 Nov 27 12:14 /dev/fw1
- User IDs:
- uid=1000(joscha) gid=1000(joscha) Gruppen=1000(joscha),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),121(lpadmin),132(sambashare)
- Prerequisites (dynamic at run-time)...
- gcc ............... gcc (Ubuntu 6.2.0-5ubuntu12) 6.2.0 20161005
- g++ ............... g++ (Ubuntu 6.2.0-5ubuntu12) 6.2.0 20161005
- PyQt4 (by pyuic4) . sh: 1: pyuic4: not found
- jackd ............. jackd version 0.124.1 tmpdir /dev/shm protocol 25
- path ............ /usr/bin/jackd
- flags ........... Package jack was not found in the pkg-config search path.
- Perhaps you should add the directory containing `jack.pc'
- to the PKG_CONFIG_PATH environment variable
- No package 'jack' found
- libraw1394 ........ 2.1.2
- flags ........... -lraw1394
- libavc1394 ........ Package libavc1394 was not found in the pkg-config search path.
- Perhaps you should add the directory containing `libavc1394.pc'
- to the PKG_CONFIG_PATH environment variable
- No package 'libavc1394' found
- flags ........... Package libavc1394 was not found in the pkg-config search path.
- Perhaps you should add the directory containing `libavc1394.pc'
- to the PKG_CONFIG_PATH environment variable
- No package 'libavc1394' found
- libiec61883 ....... 1.2.0
- flags ........... -liec61883 -lraw1394
- libxml++-2.6 ...... Package libxml++-2.6 was not found in the pkg-config search path.
- Perhaps you should add the directory containing `libxml++-2.6.pc'
- to the PKG_CONFIG_PATH environment variable
- No package 'libxml++-2.6' found
- flags ........... Package libxml++-2.6 was not found in the pkg-config search path.
- Perhaps you should add the directory containing `libxml++-2.6.pc'
- to the PKG_CONFIG_PATH environment variable
- No package 'libxml++-2.6' found
- dbus-1 ............ Package dbus-1 was not found in the pkg-config search path.
- Perhaps you should add the directory containing `dbus-1.pc'
- to the PKG_CONFIG_PATH environment variable
- No package 'dbus-1' found
- flags ........... Package dbus-1 was not found in the pkg-config search path.
- Perhaps you should add the directory containing `dbus-1.pc'
- to the PKG_CONFIG_PATH environment variable
- No package 'dbus-1' found
- Prerequisites (static at compile-time)...
- gcc ............... gcc (Ubuntu 6.1.1-11ubuntu12) 6.1.1 20160805
- g++ ............... g++ (Ubuntu 6.1.1-11ubuntu12) 6.1.1 20160805
- PyQt4 (by pyuic4) . Python User Interface Compiler 4.11.4 for Qt version 4.8.7
- jackd ............. sh: 1: jackd: not found
- path ............
- flags ........... Package jack was not found in the pkg-config search path.
- libraw1394 ........ 2.1.2
- flags ........... -lraw1394
- libavc1394 ........ Package libavc1394 was not found in the pkg-config search path.
- flags ........... Package libavc1394 was not found in the pkg-config search path.
- libiec61883 ....... 1.2.0
- flags ........... -liec61883 -lraw1394
- libxml++-2.6 ...... 2.40.1
- flags ........... -I/usr/include/libxml++-2.6 -I/usr/lib/x86_64-linux-gnu/libxml++-2.6/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib/x86_64-linux-gnu/glibmm-2.4/include -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/sigc++-2.0 -I/usr/lib/x86_64-linux-gnu/sigc++-2.0/include -lxml++-2.6 -lxml2 -lglibmm-2.4 -lgobject-2.0 -lglib-2.0 -lsigc-2.0
- dbus-1 ............ 1.10.6
- flags ........... -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -ldbus-1
- uname -a...
- Linux Proberaum 4.8.0-27-generic #29-Ubuntu SMP Thu Oct 20 21:03:13 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
- Hardware...
- Host controllers:
- 03:00.0 FireWire (IEEE 1394) [0c00]: Texas Instruments XIO2200A IEEE-1394a-2000 Controller (PHY/Link) [104c:8235] (rev 01) (prog-if 10 [OHCI])
- Subsystem: Texas Instruments XIO2200A IEEE-1394a-2000 Controller (PHY/Link) [104c:8235]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 32 (500ns min, 1000ns max)
- Interrupt: pin A routed to IRQ 19
- Region 0: Memory at df004000 (32-bit, non-prefetchable) [size=2K]
- Region 1: Memory at df000000 (32-bit, non-prefetchable) [size=16K]
- Capabilities: <access denied>
- Kernel driver in use: firewire_ohci
- Kernel modules: firewire_ohci
- CPU info:
- Architecture: x86_64
- CPU op-mode(s): 32-bit, 64-bit
- Byte Order: Little Endian
- CPU(s): 4
- On-line CPU(s) list: 0-3
- Thread(s) pro Kern: 2
- Kern(e) pro Socket: 2
- Socket(s): 1
- NUMA-Knoten: 1
- Anbieterkennung: GenuineIntel
- Prozessorfamilie: 6
- Modell: 94
- Model name: Intel(R) Core(TM) i3-6100T CPU @ 3.20GHz
- Stepping: 3
- CPU MHz: 1616.015
- CPU max MHz: 3200,0000
- CPU min MHz: 800,0000
- BogoMIPS: 6384.00
- Virtualisierung: VT-x
- L1d Cache: 32K
- L1i Cache: 32K
- L2 Cache: 256K
- L3 Cache: 3072K
- NUMA node0 CPU(s): 0-3
- Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch intel_pt tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp
- Configuration...
- IRQ information
- Hardware Interrupts:
- --------------------
- IRQ 0: PID: None, count: [24, 0, 0, 0], Sched None (priority None), drivers: ['2-edge timer']
- IRQ 1: PID: None, count: [1, 0, 1, 0], Sched None (priority None), drivers: ['1-edge i8042']
- IRQ 5: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['5-edge parport0']
- IRQ 8: PID: None, count: [0, 0, 1, 0], Sched None (priority None), drivers: ['8-edge rtc0']
- IRQ 9: PID: None, count: [1, 0, 3, 0], Sched None (priority None), drivers: ['9-fasteoi acpi']
- IRQ 12: PID: None, count: [3, 0, 1, 0], Sched None (priority None), drivers: ['12-edge i8042']
- IRQ 19: PID: None, count: [9, 0, 12755, 0], Sched None (priority None), drivers: ['19-fasteoi firewire_ohci']
- IRQ 120: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['0-edge dmar0']
- IRQ 121: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['1-edge dmar1']
- IRQ 122: PID: None, count: [445, 28507, 187222, 40760], Sched None (priority None), drivers: ['327680-edge xhci_hcd']
- IRQ 123: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['524288-edge xhci_hcd']
- IRQ 124: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['524289-edge xhci_hcd']
- IRQ 125: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['524290-edge xhci_hcd']
- IRQ 126: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['524291-edge xhci_hcd']
- IRQ 127: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['524292-edge xhci_hcd']
- IRQ 128: PID: None, count: [3887, 45131, 3356, 0], Sched None (priority None), drivers: ['376832-edge ahci']
- IRQ 129: PID: None, count: [55, 0, 1835783, 0], Sched None (priority None), drivers: ['520192-edge enp0s31f6']
- IRQ 130: PID: None, count: [927, 0, 941, 1488330], Sched None (priority None), drivers: ['32768-edge i915']
- IRQ 131: PID: None, count: [29, 0, 3, 0], Sched None (priority None), drivers: ['360448-edge mei_me']
- IRQ 132: PID: None, count: [1205, 0, 718, 0], Sched None (priority None), drivers: ['514048-edge snd_hda_intel:card0']
- Software Interrupts:
- --------------------
- === REPORT ===
- FireWire kernel drivers:
- The new FireWire kernel stack is loaded.
- If running a kernel earlier than 2.6.37 and problems are experienced, either
- try with the old Firewire kernel stack or upgrade to a newer kernel
- (preferrably 2.6.37 or later).
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement