Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ################################################################################
- # ... output of lspci -vvv
- # OpenELEC release: ION.x86_64-2.99.1
- #
- ################################################################################
- 00:00.0 Host bridge: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge (rev 02)
- Subsystem: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
- Latency: 0
- Capabilities: [e0] Vendor Specific Information: Len=08 <?>
- 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
- Subsystem: ZOTAC International (MCO) Ltd. Device a140
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Interrupt: pin A routed to IRQ 45
- Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000fee0f00c Data: 41e1
- Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
- Status: NegoPending- InProgress-
- Capabilities: [130 v1] Root Complex Link
- Desc: PortNumber=0f ComponentID=00 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
- Addr: 00000000fed1c000
- Kernel driver in use: snd_hda_intel
- Kernel modules: snd-hda-intel
- 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
- I/O behind bridge: 0000d000-0000dfff
- Memory behind bridge: fea00000-feafffff
- Prefetchable memory behind bridge: 00000000fbf00000-00000000fbffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
- ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
- Slot #32, PowerLimit 10.000W; Interlock- NoCompl-
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
- Changed: MRL- PresDet+ LinkState+
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0f00c Data: 4191
- Capabilities: [90] Subsystem: ZOTAC International (MCO) Ltd. Device a140
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed+ WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
- Status: NegoPending- InProgress-
- Capabilities: [180 v1] Root Complex Link
- Desc: PortNumber=01 ComponentID=00 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
- Addr: 00000000fed1c001
- Kernel driver in use: pcieport
- 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
- I/O behind bridge: 00001000-00001fff
- Memory behind bridge: feb00000-febfffff
- Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
- ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
- Slot #33, PowerLimit 10.000W; Interlock- NoCompl-
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
- Changed: MRL- PresDet+ LinkState+
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0f00c Data: 41a1
- Capabilities: [90] Subsystem: ZOTAC International (MCO) Ltd. Device a140
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed+ WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
- Status: NegoPending- InProgress-
- Capabilities: [180 v1] Root Complex Link
- Desc: PortNumber=02 ComponentID=00 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
- Addr: 00000000fed1c001
- Kernel driver in use: pcieport
- 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
- I/O behind bridge: 0000e000-0000efff
- Memory behind bridge: fcf00000-fdffffff
- Prefetchable memory behind bridge: 00000000ce000000-00000000dfffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
- ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
- Slot #34, PowerLimit 10.000W; Interlock- NoCompl-
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
- Changed: MRL- PresDet+ LinkState+
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0f00c Data: 41b1
- Capabilities: [90] Subsystem: ZOTAC International (MCO) Ltd. Device a140
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed+ WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
- Status: NegoPending- InProgress-
- Capabilities: [180 v1] Root Complex Link
- Desc: PortNumber=03 ComponentID=00 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
- Addr: 00000000fed1c001
- Kernel driver in use: pcieport
- 00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
- Subsystem: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 23
- Region 4: I/O ports at cc00 [size=32]
- Kernel driver in use: uhci_hcd
- 00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
- Subsystem: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 19
- Region 4: I/O ports at c880 [size=32]
- Kernel driver in use: uhci_hcd
- 00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
- Subsystem: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin C routed to IRQ 18
- Region 4: I/O ports at c800 [size=32]
- Kernel driver in use: uhci_hcd
- 00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
- Subsystem: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin D routed to IRQ 16
- Region 4: I/O ports at c480 [size=32]
- Kernel driver in use: uhci_hcd
- 00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
- Subsystem: Allied Telesis, Inc Device 27cc
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 23
- Region 0: Memory at fe9fbc00 (32-bit, non-prefetchable) [size=1K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Debug port: BAR=1 offset=00a0
- Kernel driver in use: ehci_hcd
- 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
- Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
- I/O behind bridge: 0000f000-00000fff
- Memory behind bridge: fff00000-000fffff
- Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
- Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Subsystem: ZOTAC International (MCO) Ltd. Device a140
- 00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
- Subsystem: ZOTAC International (MCO) Ltd. Device a140
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Capabilities: [e0] Vendor Specific Information: Len=0c <?>
- 00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA Controller [AHCI mode] (rev 02) (prog-if 01 [AHCI 1.0])
- Subsystem: ZOTAC International (MCO) Ltd. Device a140
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 43
- Region 0: I/O ports at b880 [size=8]
- Region 1: I/O ports at c400 [size=4]
- Region 2: I/O ports at c080 [size=8]
- Region 3: I/O ports at c000 [size=4]
- Region 4: I/O ports at bc00 [size=32]
- Region 5: Memory at fe9fb800 (32-bit, non-prefetchable) [size=1K]
- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0f00c Data: 41c1
- Capabilities: [70] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
- Kernel driver in use: ahci
- 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
- Subsystem: ZOTAC International (MCO) Ltd. Device a140
- Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Interrupt: pin B routed to IRQ 19
- Region 4: I/O ports at 0400 [size=32]
- Kernel driver in use: i801_smbus
- 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
- Subsystem: ZOTAC International (MCO) Ltd. Device 8268
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Interrupt: pin A routed to IRQ 44
- Region 0: I/O ports at d800 [size=256]
- Region 2: Memory at fbffb000 (64-bit, prefetchable) [size=4K]
- Region 4: Memory at fbffc000 (64-bit, prefetchable) [size=16K]
- Expansion ROM at feae0000 [disabled] [size=128K]
- Capabilities: [40] Power Management version 3
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
- Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000fee0f00c Data: 41d1
- Capabilities: [70] Express (v2) Endpoint, MSI 01
- DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 4096 bytes
- DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
- ClockPM+ Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- Compliance De-emphasis: -6dB
- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
- Vector table: BAR=4 offset=00000000
- PBA: BAR=4 offset=00000800
- Capabilities: [cc] Vital Product Data
- Unknown small resource type 00, will not decode more.
- Capabilities: [100 v1] Advanced Error Reporting
- UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
- CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout+ NonFatalErr+
- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
- AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
- Capabilities: [140 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- Capabilities: [160 v1] Device Serial Number ea-12-00-00-68-4c-e0-00
- Kernel driver in use: r8169
- 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
- Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Interrupt: pin A routed to IRQ 17
- Region 0: Memory at febf0000 (64-bit, non-prefetchable) [size=64K]
- Capabilities: [40] Power Management version 3
- Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
- Address: 00000000 Data: 0000
- Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 512 bytes
- DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- Compliance De-emphasis: -6dB
- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- Capabilities: [100 v1] Advanced Error Reporting
- UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
- CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
- AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
- Capabilities: [140 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- Capabilities: [160 v1] Device Serial Number 00-15-17-ff-ff-24-14-12
- Capabilities: [170 v1] Power Budgeting <?>
- Kernel driver in use: ath9k
- Kernel modules: ath9k
- 03:00.0 VGA compatible controller: NVIDIA Corporation GT218 [ION] (rev a2) (prog-if 00 [VGA controller])
- Subsystem: PC Partner Limited Device 3100
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 18
- Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
- Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
- Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M]
- Region 5: I/O ports at ec00 [size=128]
- [virtual] Expansion ROM at fcf80000 [disabled] [size=512K]
- Capabilities: [60] Power Management version 3
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
- Address: 0000000000000000 Data: 0000
- Capabilities: [78] Express (v2) Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
- ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 512 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
- ClockPM+ Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- Compliance De-emphasis: -6dB
- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- Capabilities: [b4] Vendor Specific Information: Len=14 <?>
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- Capabilities: [128 v1] Power Budgeting <?>
- Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
- Kernel driver in use: nvidia
- Kernel modules: nvidia
- 03:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
- Subsystem: PC Partner Limited Device 3100
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Interrupt: pin A routed to IRQ 18
- Region 0: Memory at fcf7c000 (32-bit, non-prefetchable) [size=16K]
- Capabilities: [60] Power Management version 3
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
- Address: 0000000000000000 Data: 0000
- Capabilities: [78] Express (v2) Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
- ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 512 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <1us
- ClockPM+ Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- Kernel driver in use: snd_hda_intel
- Kernel modules: snd-hda-intel
- ################################################################################
- # ... output of lsusb -vvv
- # OpenELEC release: ION.x86_64-2.99.1
- #
- ################################################################################
- Bus 001 Device 002: ID 1c73:861f AMT Anysee E30 USB 2.0 DVB-T Receiver
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 0 (Defined at Interface level)
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 64
- idVendor 0x1c73 AMT
- idProduct 0x861f Anysee E30 USB 2.0 DVB-T Receiver
- bcdDevice 1.00
- iManufacturer 1 AMT.CO.KR
- iProduct 2 anysee-E7S2(LP)
- iSerial 0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 83
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0x80
- (Bus Powered)
- MaxPower 500mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 4
- bInterfaceClass 255 Vendor Specific Class
- bInterfaceSubClass 0
- bInterfaceProtocol 0
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x01 EP 1 OUT
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0040 1x 64 bytes
- bInterval 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0040 1x 64 bytes
- bInterval 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x82 EP 2 IN
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0200 1x 512 bytes
- bInterval 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x02 EP 2 OUT
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0200 1x 512 bytes
- bInterval 0
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 1
- bNumEndpoints 4
- bInterfaceClass 255 Vendor Specific Class
- bInterfaceSubClass 0
- bInterfaceProtocol 0
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x01 EP 1 OUT
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0040 1x 64 bytes
- bInterval 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0040 1x 64 bytes
- bInterval 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x82 EP 2 IN
- bmAttributes 1
- Transfer Type Isochronous
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x1400 3x 1024 bytes
- bInterval 1
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x02 EP 2 OUT
- bmAttributes 1
- Transfer Type Isochronous
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x1400 3x 1024 bytes
- bInterval 1
- Device Qualifier (for other device speed):
- bLength 10
- bDescriptorType 6
- bcdUSB 2.00
- bDeviceClass 0 (Defined at Interface level)
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 64
- bNumConfigurations 1
- Device Status: 0x0002
- (Bus Powered)
- Remote Wakeup Enabled
- Bus 001 Device 003: ID 152d:2329 JMicron Technology Corp. / JMicron USA Technology Corp. JM20329 SATA Bridge
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 0 (Defined at Interface level)
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 64
- idVendor 0x152d JMicron Technology Corp. / JMicron USA Technology Corp.
- idProduct 0x2329 JM20329 SATA Bridge
- bcdDevice 1.00
- iManufacturer 1 JMicron
- iProduct 2 USB to ATA/ATAPI bridge
- iSerial 5 7D57831E322D
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 32
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 4 Storage
- bmAttributes 0xc0
- Self Powered
- MaxPower 2mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 2
- bInterfaceClass 8 Mass Storage
- bInterfaceSubClass 6 SCSI
- bInterfaceProtocol 80 Bulk-Only
- iInterface 6 Storage
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0200 1x 512 bytes
- bInterval 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x02 EP 2 OUT
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0200 1x 512 bytes
- bInterval 0
- Device Qualifier (for other device speed):
- bLength 10
- bDescriptorType 6
- bcdUSB 2.00
- bDeviceClass 0 (Defined at Interface level)
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 64
- bNumConfigurations 1
- Device Status: 0x0001
- Self Powered
- Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 9 Hub
- bDeviceSubClass 0 Unused
- bDeviceProtocol 1 Single TT
- bMaxPacketSize0 64
- idVendor 0x05e3 Genesys Logic, Inc.
- idProduct 0x0608 USB-2.0 4-Port HUB
- bcdDevice 77.63
- iManufacturer 0
- iProduct 1 USB2.0 Hub
- iSerial 0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 100mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0 Unused
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0001 1x 1 bytes
- bInterval 12
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 4
- wHubCharacteristic 0x00e0
- Ganged power switching
- Ganged overcurrent protection
- TT think time 32 FS bits
- Port indicators
- bPwrOn2PwrGood 50 * 2 milli seconds
- bHubContrCurrent 100 milli Ampere
- DeviceRemovable 0x00
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0303 lowspeed power enable connect
- Port 2: 0000.0303 lowspeed power enable connect
- Port 3: 0000.0100 power
- Port 4: 0000.0100 power
- Device Qualifier (for other device speed):
- bLength 10
- bDescriptorType 6
- bcdUSB 2.00
- bDeviceClass 9 Hub
- bDeviceSubClass 0 Unused
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- bNumConfigurations 1
- Device Status: 0x0001
- Self Powered
- Bus 005 Device 002: ID 0d8c:0103 C-Media Electronics, Inc. CM102-A+/102S+ Audio Controller
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 1.10
- bDeviceClass 0 (Defined at Interface level)
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 8
- idVendor 0x0d8c C-Media Electronics, Inc.
- idProduct 0x0103 CM102-A+/102S+ Audio Controller
- bcdDevice 0.10
- iManufacturer 1 C-Media INC.
- iProduct 2 USB Sound Device
- iSerial 0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 116
- bNumInterfaces 2
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0x80
- (Bus Powered)
- MaxPower 500mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 0
- bInterfaceClass 1 Audio
- bInterfaceSubClass 1 Control Device
- bInterfaceProtocol 0
- iInterface 0
- AudioControl Interface Descriptor:
- bLength 9
- bDescriptorType 36
- bDescriptorSubtype 1 (HEADER)
- bcdADC 1.00
- wTotalLength 43
- bInCollection 1
- baInterfaceNr( 0) 1
- AudioControl Interface Descriptor:
- bLength 12
- bDescriptorType 36
- bDescriptorSubtype 2 (INPUT_TERMINAL)
- bTerminalID 1
- wTerminalType 0x0101 USB Streaming
- bAssocTerminal 0
- bNrChannels 2
- wChannelConfig 0x0003
- Left Front (L)
- Right Front (R)
- iChannelNames 0
- iTerminal 0
- AudioControl Interface Descriptor:
- bLength 13
- bDescriptorType 36
- bDescriptorSubtype 6 (FEATURE_UNIT)
- bUnitID 13
- bSourceID 1
- bControlSize 2
- bmaControls( 0) 0x01
- bmaControls( 0) 0x02
- Mute Control
- Loudness Control
- bmaControls( 1) 0x02
- bmaControls( 1) 0x00
- Volume Control
- bmaControls( 2) 0x02
- bmaControls( 2) 0x00
- Volume Control
- iFeature 0
- AudioControl Interface Descriptor:
- bLength 9
- bDescriptorType 36
- bDescriptorSubtype 3 (OUTPUT_TERMINAL)
- bTerminalID 3
- wTerminalType 0x0301 Speaker
- bAssocTerminal 0
- bSourceID 13
- iTerminal 0
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 1
- bAlternateSetting 0
- bNumEndpoints 0
- bInterfaceClass 1 Audio
- bInterfaceSubClass 2 Streaming
- bInterfaceProtocol 0
- iInterface 0
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 1
- bAlternateSetting 1
- bNumEndpoints 1
- bInterfaceClass 1 Audio
- bInterfaceSubClass 2 Streaming
- bInterfaceProtocol 0
- iInterface 0
- AudioStreaming Interface Descriptor:
- bLength 7
- bDescriptorType 36
- bDescriptorSubtype 1 (AS_GENERAL)
- bTerminalLink 1
- bDelay 1 frames
- wFormatTag 1 PCM
- AudioStreaming Interface Descriptor:
- bLength 14
- bDescriptorType 36
- bDescriptorSubtype 2 (FORMAT_TYPE)
- bFormatType 1 (FORMAT_TYPE_I)
- bNrChannels 2
- bSubframeSize 2
- bBitResolution 16
- bSamFreqType 2 Discrete
- tSamFreq[ 0] 44100
- tSamFreq[ 1] 48000
- Endpoint Descriptor:
- bLength 9
- bDescriptorType 5
- bEndpointAddress 0x06 EP 6 OUT
- bmAttributes 9
- Transfer Type Isochronous
- Synch Type Adaptive
- Usage Type Data
- wMaxPacketSize 0x00c0 1x 192 bytes
- bInterval 1
- bRefresh 0
- bSynchAddress 0
- AudioControl Endpoint Descriptor:
- bLength 7
- bDescriptorType 37
- bDescriptorSubtype 1 (EP_GENERAL)
- bmAttributes 0x01
- Sampling Frequency
- bLockDelayUnits 0 Undefined
- wLockDelay 0 Undefined
- Device Status: 0x0000
- (Bus Powered)
- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 9 Hub
- bDeviceSubClass 0 Unused
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0002 2.0 root hub
- bcdDevice 3.06
- iManufacturer 3 Linux 3.6.11 ehci_hcd
- iProduct 2 EHCI Host Controller
- iSerial 1 0000:00:1d.7
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0 Unused
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0004 1x 4 bytes
- bInterval 12
- Hub Descriptor:
- bLength 11
- bDescriptorType 41
- nNbrPorts 8
- wHubCharacteristic 0x000a
- No power switching (usb 1.0)
- Per-port overcurrent protection
- bPwrOn2PwrGood 10 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x00 0x00
- PortPwrCtrlMask 0xff 0xff
- Hub Port Status:
- Port 1: 0000.0100 power
- Port 2: 0000.0100 power
- Port 3: 0000.0503 highspeed power enable connect
- Port 4: 0000.0503 highspeed power enable connect
- Port 5: 0000.0503 highspeed power enable connect
- Port 6: 0000.0100 power
- Port 7: 0000.0100 power
- Port 8: 0000.0100 power
- Device Status: 0x0003
- Self Powered
- Remote Wakeup Enabled
- Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 1.10
- bDeviceClass 9 Hub
- bDeviceSubClass 0 Unused
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0001 1.1 root hub
- bcdDevice 3.06
- iManufacturer 3 Linux 3.6.11 uhci_hcd
- iProduct 2 UHCI Host Controller
- iSerial 1 0000:00:1d.0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0 Unused
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0002 1x 2 bytes
- bInterval 255
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 2
- wHubCharacteristic 0x000a
- No power switching (usb 1.0)
- Per-port overcurrent protection
- bPwrOn2PwrGood 1 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x00
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0100 power
- Port 2: 0000.0100 power
- Device Status: 0x0001
- Self Powered
- Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 1.10
- bDeviceClass 9 Hub
- bDeviceSubClass 0 Unused
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0001 1.1 root hub
- bcdDevice 3.06
- iManufacturer 3 Linux 3.6.11 uhci_hcd
- iProduct 2 UHCI Host Controller
- iSerial 1 0000:00:1d.1
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0 Unused
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0002 1x 2 bytes
- bInterval 255
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 2
- wHubCharacteristic 0x000a
- No power switching (usb 1.0)
- Per-port overcurrent protection
- bPwrOn2PwrGood 1 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x00
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0100 power
- Port 2: 0000.0100 power
- Device Status: 0x0001
- Self Powered
- Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 1.10
- bDeviceClass 9 Hub
- bDeviceSubClass 0 Unused
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0001 1.1 root hub
- bcdDevice 3.06
- iManufacturer 3 Linux 3.6.11 uhci_hcd
- iProduct 2 UHCI Host Controller
- iSerial 1 0000:00:1d.2
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0 Unused
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0002 1x 2 bytes
- bInterval 255
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 2
- wHubCharacteristic 0x000a
- No power switching (usb 1.0)
- Per-port overcurrent protection
- bPwrOn2PwrGood 1 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x00
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0100 power
- Port 2: 0000.0100 power
- Device Status: 0x0001
- Self Powered
- Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 1.10
- bDeviceClass 9 Hub
- bDeviceSubClass 0 Unused
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0001 1.1 root hub
- bcdDevice 3.06
- iManufacturer 3 Linux 3.6.11 uhci_hcd
- iProduct 2 UHCI Host Controller
- iSerial 1 0000:00:1d.3
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0 Unused
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0002 1x 2 bytes
- bInterval 255
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 2
- wHubCharacteristic 0x000a
- No power switching (usb 1.0)
- Per-port overcurrent protection
- bPwrOn2PwrGood 1 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x00
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0100 power
- Port 2: 0000.0103 power enable connect
- Device Status: 0x0001
- Self Powered
- Bus 001 Device 006: ID 047d:203e Kensington
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 0 (Defined at Interface level)
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 8
- idVendor 0x047d Kensington
- idProduct 0x203e
- bcdDevice 0.04
- iManufacturer 0
- iProduct 2 SlimBlade Mouse with Nano Receiver
- iSerial 0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 34
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xa0
- (Bus Powered)
- Remote Wakeup
- MaxPower 98mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 3 Human Interface Device
- bInterfaceSubClass 1 Boot Interface Subclass
- bInterfaceProtocol 2 Mouse
- iInterface 0
- HID Device Descriptor:
- bLength 9
- bDescriptorType 33
- bcdHID 1.11
- bCountryCode 0 Not supported
- bNumDescriptors 1
- bDescriptorType 34 Report
- wDescriptorLength 101
- Report Descriptors:
- ** UNAVAILABLE **
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0008 1x 8 bytes
- bInterval 10
- Device Status: 0x0000
- (Bus Powered)
- Bus 001 Device 007: ID 413c:2005 Dell Computer Corp. RT7D50 Keyboard
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 1.10
- bDeviceClass 0 (Defined at Interface level)
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 8
- idVendor 0x413c Dell Computer Corp.
- idProduct 0x2005 RT7D50 Keyboard
- bcdDevice 1.04
- iManufacturer 1 DELL
- iProduct 2 DELL USB Keyboard
- iSerial 0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 34
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xa0
- (Bus Powered)
- Remote Wakeup
- MaxPower 100mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 3 Human Interface Device
- bInterfaceSubClass 1 Boot Interface Subclass
- bInterfaceProtocol 1 Keyboard
- iInterface 0
- HID Device Descriptor:
- bLength 9
- bDescriptorType 33
- bcdHID 1.10
- bCountryCode 0 Not supported
- bNumDescriptors 1
- bDescriptorType 34 Report
- wDescriptorLength 65
- Report Descriptors:
- ** UNAVAILABLE **
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0008 1x 8 bytes
- bInterval 10
- Device Status: 0x0000
- (Bus Powered)
- ################################################################################
- # ... output of cat /proc/cpuinfo
- # OpenELEC release: ION.x86_64-2.99.1
- #
- ################################################################################
- processor : 0
- vendor_id : GenuineIntel
- cpu family : 6
- model : 28
- model name : Intel(R) Atom(TM) CPU D510 @ 1.66GHz
- stepping : 10
- microcode : 0x107
- cpu MHz : 1662.600
- cache size : 512 KB
- physical id : 0
- siblings : 4
- core id : 0
- cpu cores : 2
- apicid : 0
- initial apicid : 0
- fpu : yes
- fpu_exception : yes
- cpuid level : 10
- wp : yes
- flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm dtherm
- bogomips : 3326.75
- clflush size : 64
- cache_alignment : 64
- address sizes : 36 bits physical, 48 bits virtual
- power management:
- processor : 1
- vendor_id : GenuineIntel
- cpu family : 6
- model : 28
- model name : Intel(R) Atom(TM) CPU D510 @ 1.66GHz
- stepping : 10
- microcode : 0x107
- cpu MHz : 1662.600
- cache size : 512 KB
- physical id : 0
- siblings : 4
- core id : 1
- cpu cores : 2
- apicid : 2
- initial apicid : 2
- fpu : yes
- fpu_exception : yes
- cpuid level : 10
- wp : yes
- flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts nopl aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm dtherm
- bogomips : 3326.75
- clflush size : 64
- cache_alignment : 64
- address sizes : 36 bits physical, 48 bits virtual
- power management:
- processor : 2
- vendor_id : GenuineIntel
- cpu family : 6
- model : 28
- model name : Intel(R) Atom(TM) CPU D510 @ 1.66GHz
- stepping : 10
- microcode : 0x107
- cpu MHz : 1662.600
- cache size : 512 KB
- physical id : 0
- siblings : 4
- core id : 0
- cpu cores : 2
- apicid : 1
- initial apicid : 1
- fpu : yes
- fpu_exception : yes
- cpuid level : 10
- wp : yes
- flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts nopl aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm dtherm
- bogomips : 3326.75
- clflush size : 64
- cache_alignment : 64
- address sizes : 36 bits physical, 48 bits virtual
- power management:
- processor : 3
- vendor_id : GenuineIntel
- cpu family : 6
- model : 28
- model name : Intel(R) Atom(TM) CPU D510 @ 1.66GHz
- stepping : 10
- microcode : 0x107
- cpu MHz : 1662.600
- cache size : 512 KB
- physical id : 0
- siblings : 4
- core id : 1
- cpu cores : 2
- apicid : 3
- initial apicid : 3
- fpu : yes
- fpu_exception : yes
- cpuid level : 10
- wp : yes
- flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts nopl aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm dtherm
- bogomips : 3326.75
- clflush size : 64
- cache_alignment : 64
- address sizes : 36 bits physical, 48 bits virtual
- power management:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement