Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.39-gentoo-r3 (root@psrv) (gcc version 4.4.5 (Gentoo 4.4.5 p1.3, pie-0.4.5) ) #1 SMP Sun Sep 18 23:24:55 ALMT 2011
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
 BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000dfff3000 (usable)
 BIOS-e820: 00000000dfff3000 - 00000000dfffb000 (ACPI data)
 BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000011bfff000 (usable)
Notice: NX (Execute Disable) protection missing in CPU!
DMI 2.3 present.
DMI: HP ProLiant DL360 G4p, BIOS P54 11/11/2005
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0xdfff3 max_arch_pfn = 0x100000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0E0000000 mask FE0000000 uncachable
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00f4f60] f4f60
initial memory mapped : 0 - 00c00000
Base memory trampoline at [c009b000] 9b000 size 4096
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ bfb000-c00000
RAMDISK: 37ea7000 - 37ff0000
Allocated new RAMDISK: 376b5000 - 377fdec2
Move RAMDISK from 0000000037ea7000 - 0000000037fefec1 to 376b5000 - 377fdec1
ACPI: RSDP 000f4ee0 00024 (v02 HP    )
ACPI: XSDT dfff32c0 0004C (v01 HP     P54      00000002   Т? 0000162E)
ACPI: FACP dfff3340 000F4 (v03 HP     P54      00000002   Т? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110316/tbfadt-610)
ACPI: DSDT dfff3440 01A6D (v01 HP         DSDT 00000001 INTL 20030228)
ACPI: FACS dfff3100 00040
ACPI: SPCR dfff3140 00050 (v01 HP     SPCRRBSU 00000001   Т? 0000162E)
ACPI: MCFG dfff31c0 0003C (v01 HP     ProLiant 00000001      00000000)
ACPI: APIC dfff3200 000B6 (v01 HP     00000083 00000002      00000000)
ACPI: SSDT dfff8000 004C9 (v01 HP        SSDTP 00000001 INTL 20030228)
ACPI: Local APIC address 0xfee00000
2695MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x000dfff3
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009c
    0: 0x00000100 -> 0x000dfff3
On node 0 totalpages: 917375
free_area_init_node: node 0, pgdat c054fa80, node_mem_map f5ab4200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3948 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 5392 pages used for memmap
  HighMem zone: 684773 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec10000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec82000] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec82000, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec82400] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec82400, GSI 72-95
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 112
Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f5400000 s26240 r0 d22912 u1048576
pcpu-alloc: s26240 r0 d22912 u1048576 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 910207
Kernel command line: root=/dev/ram0 real_root=LABEL=blz_root video=vesafb:mtrr:3,ywrap vga=792
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:000dfff3)
Memory: 3633108k/3669964k available (3168k kernel code, 36392k reserved, 1268k data, 420k init, 2760660k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff67000 - 0xfffff000   ( 608 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc0556000 - 0xc05bf000   ( 420 kB)
      .data : 0xc0418203 - 0xc0555300   (1268 kB)
      .text : 0xc0100000 - 0xc0418203   (3168 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:384
CPU 0 irqstacks, hard=f500c000 soft=f500e000
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 3000.098 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.19 BogoMIPS (lpj=30000980)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20110316
Enabling APIC mode:  Flat.  Using 4 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 0a
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version:                0
... bit width:              40
... generic registers:      18
... value mask:             000000ffffffffff
... max period:             0000007fffffffff
... fixed-purpose events:   0
... event mask:             000000000003ffff
CPU 1 irqstacks, hard=f5090000 soft=f5092000
Booting Node   0, Processors  #1
smpboot cpu 1: start_ip = 9b000
Initializing CPU#1
CPU 2 irqstacks, hard=f509c000 soft=f509e000
 #2
smpboot cpu 2: start_ip = 9b000
Initializing CPU#2
CPU 3 irqstacks, hard=f50ac000 soft=f50ae000
 #3 Ok.
smpboot cpu 3: start_ip = 9b000
Initializing CPU#3
Brought up 4 CPUs
Total of 4 processors activated (24001.47 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: Intel Corporation E7520 Memory Controller Hub with MMCONFIG support
PCI: not using MMCONFIG
PCI: PCI BIOS revision 2.10 entry at 0xf0096, last bus=15
PCI: Using configuration type 1 for base access
PCI: HP ProLiant DL360 detected, enabling pci=bfsort.
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT dfff9000 002DA (v01 HP        SSDT0 00000001 INTL 20030228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 002DA (v01 HP        SSDT0 00000001 INTL 20030228)
ACPI: SSDT dfff9300 002DA (v01 HP        SSDT1 00000001 INTL 20030228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 002DA (v01 HP        SSDT1 00000001 INTL 20030228)
ACPI: SSDT dfffa200 002DA (v01 HP        SSDT6 00000001 INTL 20030228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 002DA (v01 HP        SSDT6 00000001 INTL 20030228)
ACPI: SSDT dfffa500 002DA (v01 HP        SSDT7 00000001 INTL 20030228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 002DA (v01 HP        SSDT7 00000001 INTL 20030228)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
pci 0000:00:00.0: [8086:3590] type 0 class 0x000600
pci 0000:00:02.0: [8086:3595] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: [8086:3597] type 1 class 0x000604
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:06.0: [8086:3599] type 1 class 0x000604
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:1c.0: [8086:25ae] type 1 class 0x000604
pci 0000:00:1d.0: [8086:25a9] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0x2000-0x201f]
pci 0000:00:1d.1: [8086:25aa] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0x2020-0x203f]
pci 0000:00:1d.4: [8086:25ab] type 0 class 0x000880
pci 0000:00:1d.4: reg 10: [mem 0xfbef0000-0xfbef000f]
pci 0000:00:1d.5: [8086:25ac] type 0 class 0x000800
pci 0000:00:1d.7: [8086:25ad] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfbee0000-0xfbee03ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:25a1] type 0 class 0x000601
pci 0000:00:1f.1: [8086:25a2] type 0 class 0x000101
pci 0000:00:1f.1: reg 10: [io  0x01f0-0x01f7]
pci 0000:00:1f.1: reg 14: [io  0x03f4-0x03f7]
pci 0000:00:1f.1: reg 18: [io  0x0170-0x0177]
pci 0000:00:1f.1: reg 1c: [io  0x0374-0x0377]
pci 0000:00:1f.1: reg 20: [io  0x0500-0x050f]
pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
pci 0000:00:02.0: PCI bridge to [bus 0d-0f]
pci 0000:00:02.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:02.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:02.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.0: [8086:0329] type 1 class 0x000604
pci 0000:06:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.2: [8086:032a] type 1 class 0x000604
pci 0000:06:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0000:06:00.2: PME# supported from D0 D3hot D3cold
pci 0000:06:00.2: PME# disabled
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:04.0: PCI bridge to [bus 06-0c]
pci 0000:00:04.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:04.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:01.0: [105a:3376] type 0 class 0x000104
pci 0000:07:01.0: reg 10: [io  0x5000-0x503f]
pci 0000:07:01.0: reg 14: [io  0x5040-0x504f]
pci 0000:07:01.0: reg 18: [io  0x5080-0x50ff]
pci 0000:07:01.0: reg 1c: [mem 0xfdff0000-0xfdff0fff]
pci 0000:07:01.0: reg 20: [mem 0xfdfc0000-0xfdfdffff]
pci 0000:07:01.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:07:01.0: supports D1
pci 0000:06:00.0: PCI bridge to [bus 07-09]
pci 0000:06:00.0:   bridge window [io  0x5000-0x5fff]
pci 0000:06:00.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:06:00.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.2: PCI bridge to [bus 0a-0c]
pci 0000:06:00.2:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:06:00.2:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:06:00.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:06.0: PCI bridge to [bus 03-05]
pci 0000:00:06.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:06.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:06.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:01.0: [0e11:0046] type 0 class 0x000104
pci 0000:02:01.0: reg 10: [mem 0xfdef0000-0xfdef1fff 64bit]
pci 0000:02:01.0: reg 18: [io  0x4000-0x40ff]
pci 0000:02:01.0: reg 1c: [mem 0xfde80000-0xfdebffff 64bit]
pci 0000:02:01.0: reg 30: [mem 0x00000000-0x0003ffff pref]
pci 0000:02:01.0: supports D1
pci 0000:02:02.0: [14e4:1648] type 0 class 0x000200
pci 0000:02:02.0: reg 10: [mem 0xfde70000-0xfde7ffff 64bit]
pci 0000:02:02.0: PME# supported from D3hot D3cold
pci 0000:02:02.0: PME# disabled
pci 0000:02:02.1: [14e4:1648] type 0 class 0x000200
pci 0000:02:02.1: reg 10: [mem 0xfde60000-0xfde6ffff 64bit]
pci 0000:02:02.1: PME# supported from D3hot D3cold
pci 0000:02:02.1: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:03.0: [1002:4752] type 0 class 0x000300
pci 0000:01:03.0: reg 10: [mem 0xfc000000-0xfcffffff]
pci 0000:01:03.0: reg 14: [io  0x3000-0x30ff]
pci 0000:01:03.0: reg 18: [mem 0xfbff0000-0xfbff0fff]
pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: [0e11:b203] type 0 class 0x000880
pci 0000:01:04.0: reg 10: [io  0x1800-0x18ff]
pci 0000:01:04.0: reg 14: [mem 0xfbfe0000-0xfbfe01ff]
pci 0000:01:04.2: [0e11:b204] type 0 class 0x000880
pci 0000:01:04.2: reg 10: [io  0x3400-0x34ff]
pci 0000:01:04.2: reg 14: [mem 0xfbfd0000-0xfbfd07ff]
pci 0000:01:04.2: reg 18: [mem 0xfbfc0000-0xfbfc1fff]
pci 0000:01:04.2: reg 1c: [mem 0xfbf00000-0xfbf7ffff]
pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x1000-0x3fff]
pci 0000:00:1e.0:   bridge window [mem 0xfbf00000-0xfcffffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHR._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTB0.PCXA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTB0.PCXB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7 10 11)
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1d.0: address space collision: [io  0x2000-0x201f] conflicts with PCI Bus 0000:01 [io  0x1000-0x3fff]
pci 0000:00:1d.1: address space collision: [io  0x2020-0x203f] conflicts with PCI Bus 0000:01 [io  0x1000-0x3fff]
reserve RAM buffer: 000000000009c400 - 000000000009ffff
reserve RAM buffer: 00000000dfff3000 - 00000000dfffffff
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-7f]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0xe0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0070-0x0077]
pnp 00:01: [io  0x0408-0x040f]
pnp 00:01: [io  0x04d0-0x04d1]
pnp 00:01: [io  0x0020-0x003f]
pnp 00:01: [io  0x00a0-0x00bf]
pnp 00:01: [io  0x0090-0x009f]
pnp 00:01: [io  0x0050-0x0053]
pnp 00:01: [io  0x0700-0x071f]
pnp 00:01: [io  0x0800-0x083f]
pnp 00:01: [io  0x0900-0x097f]
pnp 00:01: [io  0x0010-0x001f]
pnp 00:01: [io  0x0c80-0x0c83]
pnp 00:01: [io  0x0cd4-0x0cd7]
pnp 00:01: [io  0x0f50-0x0f58]
pnp 00:01: [io  0x02f8-0x02ff]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: disabling [io  0x0010-0x001f] because it overlaps 0000:00:1d.0 BAR 4 [io  0x0000-0x001f]
pnp 00:01: disabling [io  0x0010-0x001f disabled] because it overlaps 0000:00:1d.1 BAR 4 [io  0x0000-0x001f]
system 00:01: [io  0x0408-0x040f] has been reserved
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0700-0x071f] has been reserved
system 00:01: [io  0x0800-0x083f] has been reserved
system 00:01: [io  0x0900-0x097f] has been reserved
system 00:01: [io  0x0c80-0x0c83] has been reserved
system 00:01: [io  0x0cd4-0x0cd7] has been reserved
system 00:01: [io  0x0f50-0x0f58] has been reserved
system 00:01: [io  0x02f8-0x02ff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 7]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0080-0x008f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io  0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: [io  0x0060]
pnp 00:04: [io  0x0064]
pnp 00:04: [irq 1]
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: [irq 12]
pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:06: [io  0x002e-0x002f]
pnp 00:06: [io  0x004e-0x004f]
pnp 00:06: [io  0x0220-0x025f]
pnp 00:06: [io  0x0280-0x029f]
pnp 00:06: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:07: [irq 4]
pnp 00:07: [io  0x03f8-0x03ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (disabled)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
pci 0000:00:04.0: BAR 9: assigned [mem 0xf0000000-0xf00fffff pref]
pci 0000:00:1c.0: BAR 9: assigned [mem 0xf0100000-0xf01fffff pref]
pci 0000:00:1e.0: BAR 9: assigned [mem 0xf0200000-0xf02fffff pref]
pci 0000:00:1f.1: BAR 5: assigned [mem 0xf0300000-0xf03003ff]
pci 0000:00:1f.1: BAR 5: set to [mem 0xf0300000-0xf03003ff] (PCI address [0xf0300000-0xf03003ff])
pci 0000:00:1d.0: BAR 4: assigned [io  0x6000-0x601f]
pci 0000:00:1d.0: BAR 4: set to [io  0x6000-0x601f] (PCI address [0x6000-0x601f])
pci 0000:00:1d.1: BAR 4: assigned [io  0x6020-0x603f]
pci 0000:00:1d.1: BAR 4: set to [io  0x6020-0x603f] (PCI address [0x6020-0x603f])
pci 0000:00:02.0: PCI bridge to [bus 0d-0f]
pci 0000:00:02.0:   bridge window [io  disabled]
pci 0000:00:02.0:   bridge window [mem disabled]
pci 0000:00:02.0:   bridge window [mem pref disabled]
pci 0000:06:00.0: BAR 9: assigned [mem 0xf0000000-0xf00fffff pref]
pci 0000:07:01.0: BAR 6: assigned [mem 0xf0000000-0xf000ffff pref]
pci 0000:06:00.0: PCI bridge to [bus 07-09]
pci 0000:06:00.0:   bridge window [io  0x5000-0x5fff]
pci 0000:06:00.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:06:00.0:   bridge window [mem 0xf0000000-0xf00fffff pref]
pci 0000:06:00.2: PCI bridge to [bus 0a-0c]
pci 0000:06:00.2:   bridge window [io  disabled]
pci 0000:06:00.2:   bridge window [mem disabled]
pci 0000:06:00.2:   bridge window [mem pref disabled]
pci 0000:00:04.0: PCI bridge to [bus 06-0c]
pci 0000:00:04.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:04.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf00fffff pref]
pci 0000:00:06.0: PCI bridge to [bus 03-05]
pci 0000:00:06.0:   bridge window [io  disabled]
pci 0000:00:06.0:   bridge window [mem disabled]
pci 0000:00:06.0:   bridge window [mem pref disabled]
pci 0000:02:01.0: BAR 6: assigned [mem 0xf0100000-0xf013ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.0:   bridge window [mem 0xf0100000-0xf01fffff pref]
pci 0000:01:03.0: BAR 6: assigned [mem 0xf0200000-0xf021ffff pref]
pci 0000:01:04.2: BAR 6: assigned [mem 0xf0220000-0xf022ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0:   bridge window [io  0x1000-0x3fff]
pci 0000:00:1e.0:   bridge window [mem 0xfbf00000-0xfcffffff]
pci 0000:00:1e.0:   bridge window [mem 0xf0200000-0xf02fffff pref]
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:06:00.0: setting latency timer to 64
pci 0000:06:00.2: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf00fffff pref]
pci_bus 0000:07: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:07: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:07: resource 2 [mem 0xf0000000-0xf00fffff pref]
pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:02: resource 2 [mem 0xf0100000-0xf01fffff pref]
pci_bus 0000:01: resource 0 [io  0x1000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfcffffff]
pci_bus 0000:01: resource 2 [mem 0xf0200000-0xf02fffff pref]
pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:1d.5: disabled boot interrupts on device [8086:25ac]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1316k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 1706
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
start plist test
end plist test
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
intel_rng: FWH not detected
vesafb: mode is 1024x768x24, linelength=3072, pages=2
vesafb: protected mode interface info at c000:4a66
vesafb: pmi: set display start = c00c4acc, set palette = c00c4b26
vesafb: pmi: ports = 3085 301f 30b4 30b8 3018 3014 30c0 30c3 30c1
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1536
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xfc000000, mapped to 0xf8080000, using 4608k, total 8128k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: acpi_idle registered with cpuidle
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
brd: module loaded
loop: module loaded
HP CISS Driver (v 3.6.26)
cciss 0000:02:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
cciss 0000:02:01.0: cciss0: <0x46> at PCI 0000:02:01.0 IRQ 24 using DAC
 cciss/c0d0: p1 p2 p3
Loading iSCSI transport class v2.0-870.
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.05
i6300ESB timer: initialized (0xf8024000). heartbeat=30 sec (nowayout=0)
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
cpuidle: using governor ladder
ioatdma: Intel(R) QuickData Technology Driver 4.00
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI Shortcut mode
Freeing unused kernel memory: 420k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
sata_promise 0000:07:01.0: version 2.12
sata_promise 0000:07:01.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
scsi0 : sata_promise
scsi1 : sata_promise
scsi2 : sata_promise
ata1: SATA max UDMA/133 mmio m4096@0xfdff0000 ata 0xfdff0200 irq 48
ata2: SATA max UDMA/133 mmio m4096@0xfdff0000 ata 0xfdff0280 irq 48
ata3: PATA max UDMA/133 mmio m4096@0xfdff0000 ata 0xfdff0300 irq 48
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input1
Refined TSC clocksource calibration: 3000.105 MHz.
Switching to clocksource tsc
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: HPA detected: current 976771055, native 976773168
ata1.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
ata1.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
ata2: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
ata4.00: ATAPI: TSSTcorpCD-ROM  TS-L162C, N204, max UDMA/33
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM            TSSTcorp CD-ROM  TS-L162C N204 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbee0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.39-gentoo-r3 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.39-gentoo-r3 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006020
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.39-gentoo-r3 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
fuse init (API version 7.16)
tg3.c:v3.117 (January 25, 2011)
tg3 0000:02:02.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25
tg3 0000:02:02.0: eth0: Tigon3 [partno(349321-001) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:17:a4:10:75:0e
tg3 0000:02:02.0: eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1])
tg3 0000:02:02.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
tg3 0000:02:02.0: eth0: dma_rwctrl[769f0000] dma_mask[64-bit]
tg3 0000:02:02.1: PCI INT B -> GSI 26 (level, low) -> IRQ 26
tg3 0000:02:02.1: eth1: Tigon3 [partno(349321-001) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:17:a4:10:75:0d
tg3 0000:02:02.1: eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1])
tg3 0000:02:02.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:02.1: eth1: dma_rwctrl[769f0000] dma_mask[64-bit]
REISERFS (device cciss/c0d0p3): found reiserfs format "3.6" with standard journal
REISERFS (device cciss/c0d0p3): using ordered data mode
REISERFS (device cciss/c0d0p3): journal params: device cciss/c0d0p3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device cciss/c0d0p3): checking transaction log (cciss/c0d0p3)
REISERFS (device cciss/c0d0p3): Using r5 hash to sort names
udev[2615]: starting version 164
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
input: PC Speaker as /devices/platform/pcspkr/input/input3
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
microcode: CPU0 sig=0xf4a, pf=0x1, revision=0x2
microcode: CPU1 sig=0xf4a, pf=0x1, revision=0x2
microcode: CPU2 sig=0xf4a, pf=0x1, revision=0x2
microcode: CPU3 sig=0xf4a, pf=0x1, revision=0x2
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
microcode: Microcode Update Driver: v2.00 removed.
Adding 2097148k swap on /dev/cciss/c0d0p2.  Priority:-1 extents:1 across:2097148k
tg3 0000:02:02.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:02.0: eth0: Flow control is on for TX and on for RX
NET: Registered protocol family 10
eth0: no IPv6 routers present
tg3 0000:02:02.0: PME# enabled
tg3 0000:02:02.0: BAR 0: set to [mem 0xfde70000-0xfde7ffff 64bit] (PCI address [0xfde70000-0xfde7ffff])
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:02.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:02.0: eth0: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present