Linux version 3.0.8-vimicro (timy@urbetter-linux4) (gcc version 4.4.3 (GCC) ) #36 PREEMPT Thu May 24 18:14:57 CST 2012
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Vimicro Vortex Board
vortex_fixup: size=0x00000000,start=0x00000000,memsize=0x00000000
early_memtotalsize: mem_total_size=0x20000000
early_revsize: pmemsize_reserve=0x04000000
early_gpusize: gpusize_reserve=0x04000000
early_vdecsize: vdecsize_reserve=0x05000000
early_fbsize: fbsize_reserve=0x00c00000
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 74752
free_area_init_node: node 0, pgdat c05debd8, node_mem_map c073c000
  Normal zone: 584 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 74168 pages, LIFO batch:15
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 74168
Kernel command line: console=ttyS0,115200 mem=292M mem_total_size=512M vmalloc=384M revsize=64M gpusize=64M vdecsize=80M fbsize=12M init=/init nandcfg=nandcfg:4K,256,4096,1,8,24,1,1,0,0,42 mtdparts=mtdparts=vc088x-nand:10m(SysInfo),11m(Uboot),118m(kernel),44m(RKer),384m(System),1664m(Data),512m(Cache),1352m(user) ubi.mtd=4 ubi.mtd=5 ubi.mtd=6
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 292MB = 292MB total
Memory: 286868k/286868k available, 12140k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xff600000 - 0xffe00000   (   8 MB)
    vmalloc : 0xd2800000 - 0xfe000000   ( 696 MB)
    lowmem  : 0xc0000000 - 0xd2400000   ( 292 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .init : 0xc0008000 - 0xc0030000   ( 160 kB)
      .text : 0xc0030000 - 0xc0586000   (5464 kB)
      .data : 0xc0586000 - 0xc05df580   ( 358 kB)
       .bss : 0xc05df5a4 - 0xc073bc70   (1394 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:324
sched_clock: 32 bits at 26MHz, resolution 38ns, wraps every 165191ms
Console: colour dummy device 80x30
console [ttyS0] enabled
Calibrating delay loop... 743.83 BogoMIPS (lpj=3719168)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
print_constraints: dummy:
NET: Registered protocol family 16
android_pmem_set_platdata: mem start: 0x80000000
android_pmem_set_platdata: mem total size: 0x20000000
android_pmem_set_platdata: vdecsize_reserve=0x05000000,pmemsize_reserve=0x04000000,gpusize_reserve=0x04000000,fbsize_reserve=0x00c00000
android_pmem_set_platdata: fb start: 0x9f400000
android_pmem_set_platdata: fb size: 0xc00000
android_pmem_set_platdata: fb end: 0x9fffffff
android_pmem_set_platdata: pmem start: 0x9b400000
android_pmem_set_platdata: pmem size: 0x4000000
android_pmem_set_platdata: gpu start: 0x97400000
android_pmem_set_platdata: gpu size: 0x4000000
android_pmem_set_platdata: gpu end: 0x9b3fffff
android_pmem_set_platdata: vdec start: 0x92400000
android_pmem_set_platdata: vdec size: 0x5000000
v8clock_sysinit
V8 Power Managerment
SRAM: Mapped pa 0x20000000 to va 0xff800000 size: 0x100000
bio: create slab <bio-0> at 0
print_constraints: OTG_USB_5V: 5000 mV
print_constraints: LCD_PWR: 10000 mV
i2c-core: driver [va7882] using legacy suspend method
i2c-core: driver [va7882] using legacy resume method
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
print_constraints: DCDC1-ARM: 1200 <--> 1500 mV at 1200 mV normal idle standby
print_constraints: DCDC2-3D: 1200 <--> 1500 mV at 1200 mV normal idle standby
print_constraints: DCDC3-Video: 1300 mV normal idle standby
print_constraints: DCDC4-Core: 1200 mV normal idle standby
print_constraints: DCDC5-DDR: 1500 mV normal standby
print_constraints: vled: 100 <--> 193 mV at 300 mV
print_constraints: LDO0-IO2V8: 2800 mV normal standby
print_constraints: LDO1-IO1V8: 1800 mV normal standby
print_constraints: LDO2-AUD3V3: 3300 mV normal standby
print_constraints: LDO3-USB3V3: 3300 mV normal standby
print_constraints: LDO4-CAM1V8: 1800 mV normal standby
print_constraints: LDO5-TVOUT2V5: 2500 mV normal standby
print_constraints: LDO6-COMBO2V8: 2800 mV normal standby
print_constraints: LDO7-LCDTP2V8: 2800 mV normal standby
print_constraints: LDO8-GPS2V8: 2800 mV normal standby
print_constraints: LDO9-COMBO3V3: 3300 mV normal standby
print_constraints: LDO10-COMBO1V8: 1800 mV normal standby
print_constraints: LDO11-BACKUP: 3300 mV normal standby
print_constraints: LDO12-NAND3V3: 3300 mV normal standby
print_constraints: LDO13-HDMI1V2: 1200 mV normal standby
print_constraints: LDO14-CAM2V8: 2800 mV normal standby
print_constraints: LDO15-PMU1V2: 1200 mV normal standby
print_constraints: LDO16-TF2V8: 2800 mV normal standby
print_constraints: LDO17-GS2V8: 2800 mV normal standby
print_constraints: LDO18-RTC2V8: 2800 mV
print_constraints: LDO19-PMU2V8: 2800 mV
print_constraints: LDO20-TP3V3: 3300 mV normal standby
print_constraints: LDO21-HUB3V3: 3300 mV normal standby
print_constraints: Charger: 200 <--> 1500 mA at 200 mA normal standby
Headset plug out.
Advanced Linux Sound Architecture Driver Version 1.0.24.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switching to clocksource v8-timer2
Switched to NOHz mode on CPU #0
musb-hdrc: version 6.0, pio, otg (peripheral+host)otg pull up
otg pull up
HS USB OTG for vc088x
musb-hdrc: ConfigData=0xdf (UTMI-16, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
musb-hdrc: kernel must blacklist external hubs
musb-hdrc: HDRC RTL version 0.0
musb-hdrc: setup fifo_mode 2
musb-hdrc: 7/9 max ep, 2624/4096 memory
musb-hdrc musb-hdrc: USB OTG mode controller at d2804000 using PIO, IRQ 22
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Freeing initrd memory: 1952K
NetWinder Floating Point Emulator V0.97 (double precision)
PMU: registered new PMU device of type 0
Add v8pwm#0
ashmem: initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.30 [Flags: R/O].
msgmni has been set to 564
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
encrypt_check Check encrypt device registed successed!!
v8fb0_probe: addr=0x9f400000,size=0x00c00000
v8-hdmi v8-hdmi: Failed to get supply 'VDD_5V': -19
test-consumer test-consumer.5: Failed to obtain supply 'vdd_dcdc6': -19
v8-uart.0: ttyS0 at MMIO 0x60043000 (irq = 35) is a v8-uart
v8-uart.1: ttyS1 at MMIO 0x60044000 (irq = 36) is a v8-uart
v8-uart.2: ttyS2 at MMIO 0x60045000 (irq = 37) is a v8-uart
v8-uart.3: ttyS3 at MMIO 0x60046000 (irq = 38) is a v8-uart
loop: module loaded
pmem: 1 init
pmem-vdec: 0 init

va7882_rtc_readtime, year less than 2012, set to 2012-2-1

va7882_rtc_readtime, year less than 2012, set to 2012-2-1
va7882-rtc va7882-rtc.0: rtc core: registered va7882 as rtc0
input: va7882-powerkey as /devices/platform/v8-i2c.0/i2c-0/0-0016/va7882-key.0/input/input0
Registered led device: spotlight
Registered led device: keyboard-backlight
Registered led device: battery-charging
Registered led device: blue
Registered led device: green
[NFC]:nr_chips=1,double_chip=0,hwecclen=42
NAND device: Manufacturer ID: 0x2c, Chip ID: 0x68 (Micron NAND 4GiB 3,3V 8-bit)
nfc errbittotal = 20
NAND_ECC_NONE selected by board driver. This is not recommended !!
Bad block table found at page 1048320, version 0xD5
Bad block table found at page 1048064, version 0xD5
nand_read_bbt: Bad block at 0x000005a00000
nand_read_bbt: Bad block at 0x000005b00000
8 cmdlinepart partitions found on MTD device mtdparts=vc088x-nand
Creating 8 MTD partitions on "mtdparts=vc088x-nand":
0x000000000000-0x000000a00000 : "SysInfo"
0x000000a00000-0x000001500000 : "Uboot"
0x000001500000-0x000008b00000 : "kernel"
0x000008b00000-0x00000b700000 : "RKer"
0x00000b700000-0x000023700000 : "System"
0x000023700000-0x00008b700000 : "Data"
0x00008b700000-0x0000ab700000 : "Cache"
0x0000ab700000-0x0000fff00000 : "user"
UBI: attaching mtd4 to ubi0
UBI: physical eraseblock size:   1048576 bytes (1024 KiB)
UBI: logical eraseblock size:    1040384 bytes
UBI: smallest flash I/O unit:    4096
UBI: VID header offset:          4096 (aligned 4096)
UBI: data offset:                8192
UBI: max. sequence number:       218
UBI: attached mtd4 to ubi0
UBI: MTD device name:            "System"
UBI: MTD device size:            384 MiB
UBI: number of good PEBs:        384
UBI: number of bad PEBs:         0
UBI: number of corrupted PEBs:   0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 384
UBI: number of PEBs reserved for bad PEB handling: 3
UBI: max/mean erase counter: 2/1
UBI: image sequence number:  27402143
UBI: background thread "ubi_bgt0d" started, PID 674
UBI: attaching mtd5 to ubi1
UBI: physical eraseblock size:   1048576 bytes (1024 KiB)
UBI: logical eraseblock size:    1040384 bytes
UBI: smallest flash I/O unit:    4096
UBI: VID header offset:          4096 (aligned 4096)
UBI: data offset:                8192
UBI: max. sequence number:       536
UBI: attached mtd5 to ubi1
UBI: MTD device name:            "Data"
UBI: MTD device size:            1664 MiB
UBI: number of good PEBs:        1664
UBI: number of bad PEBs:         0
UBI: number of corrupted PEBs:   0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 1664
UBI: number of PEBs reserved for bad PEB handling: 16
UBI: max/mean erase counter: 3/1
UBI: image sequence number:  -1834722439
UBI: background thread "ubi_bgt1d" started, PID 677
UBI: attaching mtd6 to ubi2
UBI: physical eraseblock size:   1048576 bytes (1024 KiB)
UBI: logical eraseblock size:    1040384 bytes
UBI: smallest flash I/O unit:    4096
UBI: VID header offset:          4096 (aligned 4096)
UBI: data offset:                8192
UBI: max. sequence number:       367
UBI: attached mtd6 to ubi2
UBI: MTD device name:            "Cache"
UBI: MTD device size:            512 MiB
UBI: number of good PEBs:        512
UBI: number of bad PEBs:         0
UBI: number of corrupted PEBs:   0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 512
UBI: number of PEBs reserved for bad PEB handling: 5
UBI: max/mean erase counter: 5/1
UBI: image sequence number:  -893286201
UBI: background thread "ubi_bgt2d" started, PID 680
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver smsc95xx
cdc_ncm: 04-Aug-2011
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
vc088x-ehci vc088x-ehci: VC088X EHCI Host Controller
vc088x-ehci vc088x-ehci: new USB bus registered, assigned bus number 1
vc088x-ehci vc088x-ehci: irq 21, io mem 0x60031400
vc088x-ehci vc088x-ehci: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
vc088x-ohci vc088x-ohci: VC088X OHCI Host Controller
vc088x-ohci vc088x-ohci: new USB bus registered, assigned bus number 2
vc088x-ohci vc088x-ohci: irq 20, io mem 0x60031200
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
WUDETIAN UMS fsg.nluns=2, mass_storage_function_init 543 drivers/usb/gadget/android.c
android_usb gadget: Mass Storage Function, version: 2009/09/11
android_usb gadget: Number of LUNs=2
 lun0: LUN: removable file: (no medium)
 lun1: LUN: removable file: (no medium)
android_usb gadget: android_usb ready
musb-hdrc musb-hdrc: MUSB HDRC host driver
musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
mousedev: could not register psaux device, error: -16
mousedev: PS/2 mouse device common for all mice
input: v8keypad as /devices/platform/v8-kpd.0/input/input1
input: vc088x-ts as /devices/platform/v8-tpi.0/input/input2
input: asensor as /devices/virtual/input/input3
v8sensor_mma7660_probe: Start accelsensor mma7660-asensor in polling mode.
using rtc device, va7882, for alarms
i2c /dev entries driver
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
Registered led device: lcd-backlight
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
v8aud_probe:PIN_AUDIO_PA_EN
ALSA device list:
  #0: Vimicro VC882 Audio Device
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4512 buckets, 18048 max)
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
IPv4 over IPv4 tunneling driver
GRE over IPv4 demultiplexor driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
adb_bind_config
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
L2TP IP encapsulation support (L2TPv3)
L2TP netlink interface
L2TP ethernet pseudowire support (L2TPv3)
L2TP debugfs support
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
G-Sensor driver: init
i2c-core: driver [gsensor_i2c] using legacy suspend method
i2c-core: driver [gsensor_i2c] using legacy resume method
regulator_init_complete: LDO21-HUB3V3: disabling
regulator_init_complete: LDO16-TF2V8: disabling
regulator_init_complete: LDO15-PMU1V2: disabling
regulator_init_complete: LDO13-HDMI1V2: disabling
regulator_init_complete: LDO11-BACKUP: disabling
regulator_init_complete: LDO5-TVOUT2V5: disabling
regulator_init_complete: LDO3-USB3V3: disabling
regulator_init_complete: LDO2-AUD3V3: disabling
regulator_init_complete: vled: disabling
goodix_ts power on...
input: GoodixCapacitiveTouchScreen as /devices/virtual/input/input4
android_usb gadget: full speed config #1: android
i2c-1: Nack was received
i2c-1:IO error 0x55 (error -11)
write cfg error
i2c-1: Nack was received
i2c-1:IO error 0x55 (error -11)
write cfg error
i2c-1: Nack was received
i2c-1:IO error 0x55 (error -11)
write cfg error
touchpanel-goodix: probe of 1-0055 failed with error -5

va7882_rtc_readtime, year less than 2012, set to 2012-2-1
va7882-rtc va7882-rtc.0: setting system clock to 2012-03-01 00:00:00 UTC (1330560000)
Freeing init memory: 160K
init: cannot open '/initlogo.rle'
UBIFS: mounted UBI device 0, volume 0, name "system"
UBIFS: file system size:   382861312 bytes (373888 KiB, 365 MiB, 368 LEBs)
UBIFS: journal size:       18726912 bytes (18288 KiB, 17 MiB, 18 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: none
UBIFS: reserved for root:  4952683 bytes (4836 KiB)
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 1, volume 0, name "data"
UBIFS: file system size:   1701027840 bytes (1661160 KiB, 1622 MiB, 1635 LEBs)
UBIFS: journal size:       33292288 bytes (32512 KiB, 31 MiB, 32 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: none
UBIFS: reserved for root:  4952683 bytes (4836 KiB)
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 2, volume 0, name "cache"
UBIFS: file system size:   513949696 bytes (501904 KiB, 490 MiB, 494 LEBs)
UBIFS: journal size:       26009600 bytes (25400 KiB, 24 MiB, 25 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: none
UBIFS: reserved for root:  4952683 bytes (4836 KiB)
vc882 gsensor rotate store yxZ !
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
adb_bind_config
adb_open
UBI: attaching mtd7 to ubi3
UBI: physical eraseblock size:   1048576 bytes (1024 KiB)
UBI: logical eraseblock size:    1040384 bytes
UBI: smallest flash I/O unit:    4096
UBI: VID header offset:          4096 (aligned 4096)
UBI: data offset:                8192
android_usb gadget: high speed config #1: android
UBI: max. sequence number:       2545
UBI: attached mtd7 to ubi3
UBI: MTD device name:            "user"
UBI: MTD device size:            1352 MiB
UBI: number of good PEBs:        1349
UBI: number of bad PEBs:         3
UBI: number of corrupted PEBs:   0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 1349
UBI: number of PEBs reserved for bad PEB handling: 13
UBI: max/mean erase counter: 5/2
UBI: image sequence number:  223002418
UBI: background thread "ubi_bgt3d" started, PID 1312
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 3, volume 0, name "Dataubi"
UBIFS: file system size:   1375387648 bytes (1343152 KiB, 1311 MiB, 1322 LEBs)
UBIFS: journal size:       12550144 bytes (12256 KiB, 11 MiB, 13 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: none
UBIFS: reserved for root:  0 bytes (0 KiB)
-----v8aud_helium_put_playback--val is 0,reg is 0x6004b214
-----v8aud_helium_put_playback--val is 1,reg is 0x6004b218
adbd (1341): /proc/1341/oom_adj is deprecated, please use /proc/1341/oom_score_adj instead.
warning: `zygote' uses 32-bit capabilities (legacy support in use)
request_suspend_state: wakeup (3->0) at 33368220888 (2012-03-01 00:00:28.592818195 UTC)
acc_open
acc_release

 A0:24834,A1:403,A2:92530,A3:-108,A4:25731,A5:-70669,A6:25208
--------strigger SPK ON-------